Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.2-RELEASE-p12 amd64] (local build)
- Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Caviar Green (AF)
- Device Model: WDC WD20EARS-00MVWB0
- Serial Number: WD-WCAZA3001632
- LU WWN Device Id: 5 0014ee 2055d2566
- Firmware Version: 51.0AB51
- User Capacity: 2,000,398,934,016 bytes [2.00 TB]
- Sector Size: 512 bytes logical/physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS (minor revision not indicated)
- SATA Version is: SATA 2.6, 3.0 Gb/s
- Local Time is: Thu Nov 6 11:32:45 2014 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: FAILED!
- See vendor-specific Attribute list for failed Attributes.
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (36780) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 355) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x3035) SCT Status supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x002f 036 025 051 Pre-fail Always FAILING_NOW 20881
- 3 Spin_Up_Time 0x0027 253 253 021 Pre-fail Always - 1408
- 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 25
- 5 Reallocated_Sector_Ct 0x0033 189 189 140 Pre-fail Always - 214
- 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
- 9 Power_On_Hours 0x0032 076 076 000 Old_age Always - 18143
- 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
- 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 23
- 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 12
- 193 Load_Cycle_Count 0x0032 185 185 000 Old_age Always - 45631
- 194 Temperature_Celsius 0x0022 125 110 000 Old_age Always - 25
- 196 Reallocated_Event_Count 0x0032 083 083 000 Old_age Always - 117
- 197 Current_Pending_Sector 0x0032 199 198 000 Old_age Always - 624
- 198 Offline_Uncorrectable 0x0030 200 198 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
- 200 Multi_Zone_Error_Rate 0x0008 200 098 000 Old_age Offline - 177
- SMART Error Log Version: 1
- ATA Error Count: 840 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 840 occurred at disk power-on lifetime: 18048 hours (752 days + 0 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 48 43 7a ef Error: UNC 8 sectors at LBA = 0x0f7a4348 = 259670856
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 48 43 7a ef 00 3d+01:17:35.009 READ DMA
- c8 00 08 00 8c 79 ef 00 3d+01:17:34.947 READ DMA
- c8 00 08 88 ba 79 ef 00 3d+01:17:34.890 READ DMA
- c8 00 08 c8 e2 7a ef 00 3d+01:17:34.883 READ DMA
- c8 00 08 d8 26 7a ef 00 3d+01:17:34.861 READ DMA
- Error 839 occurred at disk power-on lifetime: 18046 hours (751 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 10 90 02 40 e0 Error: UNC 16 sectors at LBA = 0x00400290 = 4194960
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 10 90 02 40 e0 00 2d+22:26:43.852 READ DMA
- Error 838 occurred at disk power-on lifetime: 18046 hours (751 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 28 47 5c e5 Error: UNC 8 sectors at LBA = 0x055c4728 = 89933608
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 28 47 5c e5 00 2d+22:25:39.025 READ DMA
- c8 00 08 c8 47 5c e5 00 2d+22:25:39.006 READ DMA
- c8 00 08 50 48 5c e5 00 2d+22:25:38.976 READ DMA
- c8 00 08 b8 1b 5c e5 00 2d+22:25:38.951 READ DMA
- c8 00 08 18 1b 5c e5 00 2d+22:25:38.945 READ DMA
- Error 837 occurred at disk power-on lifetime: 18046 hours (751 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 98 ee 16 e5 Error: UNC 8 sectors at LBA = 0x0516ee98 = 85388952
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 98 ee 16 e5 00 2d+22:22:49.961 READ DMA
- c8 00 08 a0 7f 17 e5 00 2d+22:22:49.945 READ DMA
- c8 00 08 08 80 17 e5 00 2d+22:22:49.941 READ DMA
- c8 00 08 30 7f 17 e5 00 2d+22:22:49.937 READ DMA
- c8 00 08 90 7f 17 e5 00 2d+22:22:49.923 READ DMA
- Error 836 occurred at disk power-on lifetime: 18045 hours (751 days + 21 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 10 90 02 40 e0 Error: UNC 16 sectors at LBA = 0x00400290 = 4194960
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 10 90 02 40 e0 00 2d+21:23:34.418 READ DMA
- c8 00 10 90 02 40 e0 00 2d+21:23:31.508 READ DMA
- c8 00 10 90 02 40 e0 00 2d+21:23:28.783 READ DMA
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed: unknown failure 90% 11355 -
- # 2 Short offline Completed: unknown failure 90% 11354 -
- # 3 Short offline Completed: unknown failure 90% 11353 -
- # 4 Short offline Completed: unknown failure 90% 11352 -
- # 5 Short offline Completed: unknown failure 90% 11351 -
- # 6 Short offline Completed: unknown failure 90% 11350 -
- # 7 Short offline Completed: unknown failure 90% 11349 -
- # 8 Short offline Completed: unknown failure 90% 11348 -
- # 9 Short offline Completed: unknown failure 90% 11347 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement