Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Linux version 3.2.1-gentoo-r2 (root@livecd) (gcc version 4.5.3 (Gentoo 4.5.3-r1 p1.0, pie-0.4.5) ) #1 Sun Feb 19 10:46:27 UTC 2012
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
- BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
- BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
- BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
- BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
- BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
- BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
- Notice: NX (Execute Disable) protection missing in CPU!
- DMI 2.3 present.
- DMI: Acer Aspire/J87M, BIOS 6.00 PG 09/17/2002
- e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- last_pfn = 0x1fff0 max_arch_pfn = 0x100000
- MTRR default type: uncachable
- MTRR fixed ranges enabled:
- 00000-9FFFF write-back
- A0000-AFFFF uncachable
- B0000-BFFFF write-combining
- C0000-CBFFF write-protect
- CC000-EFFFF uncachable
- F0000-FFFFF write-through
- MTRR variable ranges enabled:
- 0 base 000000000 mask FE0000000 write-back
- 1 base 0E8000000 mask FFC000000 write-combining
- 2 disabled
- 3 disabled
- 4 disabled
- 5 disabled
- 6 disabled
- 7 disabled
- x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- found SMP MP-table at [c00f50e0] f50e0
- initial memory mapped : 0 - 01800000
- Base memory trampoline at [c009c000] 9c000 size 12288
- init_memory_mapping: 0000000000000000-000000001fff0000
- 0000000000 - 0000400000 page 4k
- 0000400000 - 001fc00000 page 2M
- 001fc00000 - 001fff0000 page 4k
- kernel direct mapping tables up to 1fff0000 @ 17fb000-1800000
- ACPI: RSDP 000f6f60 00014 (v00 AWARD )
- ACPI: RSDT 1fff3000 0002C (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
- ACPI: FACP 1fff3040 00074 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
- ACPI: DSDT 1fff30c0 03D16 (v01 AWARD AWRDACPI 00001000 MSFT 0100000D)
- ACPI: FACS 1fff0000 00040
- ACPI: APIC 1fff6e00 00054 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
- ACPI: Local APIC address 0xfee00000
- 511MB LOWMEM available.
- mapped low ram: 0 - 1fff0000
- low ram: 0 - 1fff0000
- Zone PFN ranges:
- DMA 0x00000010 -> 0x00001000
- Normal 0x00001000 -> 0x0001fff0
- Movable zone start PFN for each node
- early_node_map[2] active PFN ranges
- 0: 0x00000010 -> 0x0000009f
- 0: 0x00000100 -> 0x0001fff0
- On node 0 totalpages: 130943
- free_area_init_node: node 0, pgdat c1344334, node_mem_map dfbf0200
- DMA zone: 32 pages used for memmap
- DMA zone: 0 pages reserved
- DMA zone: 3951 pages, LIFO batch:0
- Normal zone: 992 pages used for memmap
- Normal zone: 125968 pages, LIFO batch:31
- Using APIC driver default
- ACPI: PM-Timer IO Port: 0x1008
- ACPI: Local APIC address 0xfee00000
- ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- Using ACPI for processor (LAPIC) configuration information
- Intel MultiProcessor Specification v1.4
- Virtual Wire compatibility mode.
- MPTABLE: OEM ID: OEM00000
- MPTABLE: Product ID: PROD00000000
- MPTABLE: APIC at: 0xFEE00000
- Processors: 1
- PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
- PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
- Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
- pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- pcpu-alloc: [0] 0
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129919
- Kernel command line: root=/dev/sda1
- PID hash table entries: 2048 (order: 1, 8192 bytes)
- Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- Initializing CPU#0
- Memory: 515140k/524224k available (2353k kernel code, 8632k reserved, 1007k data, 320k init, 0k highmem)
- virtual kernel memory layout:
- fixmap : 0xfffe3000 - 0xfffff000 ( 112 kB)
- vmalloc : 0xe07f0000 - 0xfffe1000 ( 503 MB)
- lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
- .init : 0xc1349000 - 0xc1399000 ( 320 kB)
- .data : 0xc124c7eb - 0xc1348680 (1007 kB)
- .text : 0xc1000000 - 0xc124c7eb (2353 kB)
- Checking if this processor honours the WP bit even in supervisor mode...Ok.
- SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- NR_IRQS:16 nr_irqs:16 16
- CPU 0 irqstacks, hard=df406000 soft=df408000
- Console: colour VGA+ 80x25
- console [tty0] enabled
- Fast TSC calibration using PIT
- Detected 2390.114 MHz processor.
- Calibrating delay loop (skipped), value calculated using timer frequency.. 4780.22 BogoMIPS (lpj=2390114)
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 512
- mce: CPU supports 4 MCE banks
- CPU0: Thermal monitoring enabled (TM1)
- CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
- ACPI: Core revision 20110623
- ACPI: setting ELCR to 0200 (from 0a28)
- Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
- ... version: 0
- ... bit width: 40
- ... generic registers: 18
- ... value mask: 000000ffffffffff
- ... max period: 0000007fffffffff
- ... fixed-purpose events: 0
- ... event mask: 000000000003ffff
- devtmpfs: initialized
- PM: Registering ACPI NVS region at 1fff0000 (12288 bytes)
- RTC time: 18:25:05, date: 02/20/12
- NET: Registered protocol family 16
- ACPI: bus type pci registered
- PCI: PCI BIOS revision 2.10 entry at 0xfbb60, last bus=1
- PCI: Using configuration type 1 for base access
- bio: create slab <bio-0> at 0
- ACPI: Added _OSI(Module Device)
- ACPI: Added _OSI(Processor Device)
- ACPI: Added _OSI(3.0 _SCP Extensions)
- ACPI: Added _OSI(Processor Aggregator Device)
- ACPI: EC: Look up EC in DSDT
- ACPI: Interpreter enabled
- ACPI: (supports S0 S1 S3 S4 S5)
- ACPI: Using PIC for interrupt routing
- ACPI: No dock devices found.
- PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
- ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- pci_root PNP0A03:00: host bridge window [io 0x0000-0x047f] (ignored)
- pci_root PNP0A03:00: host bridge window [io 0x0490-0x0cf7] (ignored)
- pci_root PNP0A03:00: host bridge window [io 0x0d00-0x0fff] (ignored)
- pci_root PNP0A03:00: host bridge window [io 0x1100-0xffff] (ignored)
- pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
- pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xffee0000] (ignored)
- pci 0000:00:00.0: [1039:0651] type 0 class 0x000600
- pci 0000:00:00.0: reg 10: [mem 0xe8000000-0xebffffff]
- pci 0000:00:01.0: [1039:0001] type 1 class 0x000604
- pci 0000:00:02.0: [1039:0008] type 0 class 0x000601
- pci 0000:00:02.0: Enabling SiS 96x SMBus
- pci 0000:00:02.1: [1039:0016] type 0 class 0x000c05
- pci 0000:00:02.1: reg 20: [io 0x10c0-0x10df]
- pci 0000:00:02.3: [1039:7007] type 0 class 0x000c00
- pci 0000:00:02.3: reg 10: [mem 0xec126000-0xec126fff]
- pci 0000:00:02.3: reg 30: [mem 0x00000000-0x0001ffff pref]
- pci 0000:00:02.3: supports D1 D2
- pci 0000:00:02.3: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:00:02.3: PME# disabled
- pci 0000:00:02.5: [1039:5513] type 0 class 0x000101
- pci 0000:00:02.5: reg 10: [io 0x01f0-0x01f7]
- pci 0000:00:02.5: reg 14: [io 0x03f4-0x03f7]
- pci 0000:00:02.5: reg 18: [io 0x0170-0x0177]
- pci 0000:00:02.5: reg 1c: [io 0x0374-0x0377]
- pci 0000:00:02.5: reg 20: [io 0x4000-0x400f]
- pci 0000:00:02.5: PME# supported from D3cold
- pci 0000:00:02.5: PME# disabled
- pci 0000:00:02.7: [1039:7012] type 0 class 0x000401
- pci 0000:00:02.7: reg 10: [io 0xb400-0xb4ff]
- pci 0000:00:02.7: reg 14: [io 0xb800-0xb87f]
- pci 0000:00:02.7: supports D1 D2
- pci 0000:00:02.7: PME# supported from D3hot D3cold
- pci 0000:00:02.7: PME# disabled
- pci 0000:00:03.0: [1039:7001] type 0 class 0x000c03
- pci 0000:00:03.0: reg 10: [mem 0xec122000-0xec122fff]
- pci 0000:00:03.1: [1039:7001] type 0 class 0x000c03
- pci 0000:00:03.1: reg 10: [mem 0xec123000-0xec123fff]
- pci 0000:00:03.2: [1039:7001] type 0 class 0x000c03
- pci 0000:00:03.2: reg 10: [mem 0xec124000-0xec124fff]
- pci 0000:00:03.3: [1039:7002] type 0 class 0x000c03
- pci 0000:00:03.3: reg 10: [mem 0xec125000-0xec125fff]
- pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
- pci 0000:00:03.3: PME# disabled
- pci 0000:00:06.0: [14e4:4320] type 0 class 0x000280
- pci 0000:00:06.0: reg 10: [mem 0xec120000-0xec121fff]
- pci 0000:00:07.0: [1102:0002] type 0 class 0x000401
- pci 0000:00:07.0: reg 10: [io 0xbc00-0xbc1f]
- pci 0000:00:07.1: [1102:7002] type 0 class 0x000980
- pci 0000:00:07.1: reg 10: [io 0xc000-0xc007]
- pci 0000:00:0f.0: [10ec:8139] type 0 class 0x000200
- pci 0000:00:0f.0: reg 10: [io 0xc400-0xc4ff]
- pci 0000:00:0f.0: reg 14: [mem 0xec127000-0xec1270ff]
- pci 0000:00:0f.0: reg 30: [mem 0x00000000-0x0000ffff pref]
- pci 0000:00:0f.0: supports D1 D2
- pci 0000:00:0f.0: PME# supported from D1 D2 D3hot D3cold
- pci 0000:00:0f.0: PME# disabled
- pci 0000:01:00.0: [1002:5157] type 0 class 0x000300
- pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xe7ffffff pref]
- pci 0000:01:00.0: reg 14: [io 0x9000-0x90ff]
- pci 0000:01:00.0: reg 18: [mem 0xec020000-0xec02ffff]
- pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
- pci 0000:01:00.0: supports D1 D2
- pci 0000:00:01.0: PCI bridge to [bus 01-01]
- pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
- pci 0000:00:01.0: bridge window [mem 0xec000000-0xec0fffff]
- pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe7ffffff pref]
- pci_bus 0000:00: on NUMA node 0
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
- ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 14 15)
- ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 14 15)
- ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 14 15)
- ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 14 15)
- ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 14 15)
- ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 14 15)
- ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 14 15)
- vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- vgaarb: loaded
- vgaarb: bridge control possible 0000:01:00.0
- SCSI subsystem initialized
- libata version 3.00 loaded.
- PCI: Using ACPI for IRQ routing
- PCI: pci_cache_line_size set to 64 bytes
- reserve RAM buffer: 000000000009fc00 - 000000000009ffff
- reserve RAM buffer: 000000001fff0000 - 000000001fffffff
- pnp: PnP ACPI init
- ACPI: bus type pnp registered
- pnp 00:00: [mem 0x000cc000-0x000cffff]
- pnp 00:00: [mem 0x000f0000-0x000f7fff]
- pnp 00:00: [mem 0x000f8000-0x000fbfff]
- pnp 00:00: [mem 0x000fc000-0x000fffff]
- pnp 00:00: [mem 0x1fff0000-0x1fffffff]
- pnp 00:00: [mem 0xffff0000-0xffffffff]
- pnp 00:00: [mem 0x00000000-0x0009ffff]
- pnp 00:00: [mem 0x00100000-0x1ffeffff]
- pnp 00:00: [mem 0xffee0000-0xffefffff]
- pnp 00:00: [mem 0xfffe0000-0xfffeffff]
- pnp 00:00: [mem 0xfec00000-0xfecfffff]
- pnp 00:00: [mem 0xfee00000-0xfeefffff]
- system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
- system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
- system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
- system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
- system 00:00: [mem 0x1fff0000-0x1fffffff] could not be reserved
- system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
- system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
- system 00:00: [mem 0x00100000-0x1ffeffff] could not be reserved
- system 00:00: [mem 0xffee0000-0xffefffff] has been reserved
- system 00:00: [mem 0xfffe0000-0xfffeffff] has been reserved
- system 00:00: [mem 0xfec00000-0xfecfffff] could not be reserved
- system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
- system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
- pnp 00:01: [bus 00-ff]
- pnp 00:01: [io 0x0cf8-0x0cff]
- pnp 00:01: [io 0x0000-0x047f window]
- pnp 00:01: [io 0x0480-0x048f]
- pnp 00:01: [io 0x0490-0x0cf7 window]
- pnp 00:01: [io 0x0d00-0x0fff window]
- pnp 00:01: [io 0x1000-0x10bf]
- pnp 00:01: [io 0x10c0-0x113f]
- pnp 00:01: [io 0x1100-0xffff window]
- pnp 00:01: [mem 0x000a0000-0x000bffff window]
- pnp 00:01: [mem 0x20000000-0xffee0000 window]
- pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
- pnp 00:02: [io 0x0010-0x001f]
- pnp 00:02: [io 0x0022-0x003f]
- pnp 00:02: [io 0x0044-0x005f]
- pnp 00:02: [io 0x0062-0x0063]
- pnp 00:02: [io 0x0065-0x006f]
- pnp 00:02: [io 0x0074-0x007f]
- pnp 00:02: [io 0x0091-0x0093]
- pnp 00:02: [io 0x00a2-0x00bf]
- pnp 00:02: [io 0x00e0-0x00ef]
- pnp 00:02: [io 0x04d0-0x04d1]
- pnp 00:02: [io 0x0294-0x0297]
- system 00:02: [io 0x04d0-0x04d1] has been reserved
- system 00:02: [io 0x0294-0x0297] has been reserved
- system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:03: [dma 4]
- pnp 00:03: [io 0x0000-0x000f]
- pnp 00:03: [io 0x0080-0x0090]
- pnp 00:03: [io 0x0094-0x009f]
- pnp 00:03: [io 0x00c0-0x00df]
- pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
- pnp 00:04: [io 0x0070-0x0073]
- pnp 00:04: [irq 8]
- pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
- pnp 00:05: [io 0x0061]
- pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
- pnp 00:06: [io 0x00f0-0x00ff]
- pnp 00:06: [irq 13]
- pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
- pnp 00:07: [io 0x03f2-0x03f5]
- pnp 00:07: [io 0x03f7]
- pnp 00:07: [irq 6]
- pnp 00:07: [dma 2]
- pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
- pnp 00:08: [io 0x03f8-0x03ff]
- pnp 00:08: [irq 4]
- pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
- pnp 00:09: [io 0x0378-0x037f]
- pnp 00:09: [io 0x0778-0x077b]
- pnp 00:09: [irq 7]
- pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
- pnp 00:0a: [io 0x0060]
- pnp 00:0a: [io 0x0064]
- system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:0b: [io 0x0201-0x0207]
- pnp 00:0b: [io 0x0200]
- pnp 00:0b: Plug and Play ACPI device, IDs PNPb02f (active)
- pnp 00:0c: [io 0x0330-0x0331]
- pnp 00:0c: [irq 10]
- pnp 00:0c: Plug and Play ACPI device, IDs PNPb006 (active)
- pnp: PnP ACPI: found 13 devices
- ACPI: ACPI bus type pnp unregistered
- Switching to clocksource acpi_pm
- PCI: max bus depth: 1 pci_try_num: 2
- pci 0000:00:02.3: BAR 6: assigned [mem 0x20000000-0x2001ffff pref]
- pci 0000:00:0f.0: BAR 6: assigned [mem 0x20020000-0x2002ffff pref]
- pci 0000:01:00.0: BAR 6: assigned [mem 0xec000000-0xec01ffff pref]
- pci 0000:00:01.0: PCI bridge to [bus 01-01]
- pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
- pci 0000:00:01.0: bridge window [mem 0xec000000-0xec0fffff]
- pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe7ffffff pref]
- pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
- pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
- pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
- pci_bus 0000:01: resource 1 [mem 0xec000000-0xec0fffff]
- pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe7ffffff pref]
- NET: Registered protocol family 2
- IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
- TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
- TCP: Hash tables configured (established 16384 bind 16384)
- TCP reno registered
- UDP hash table entries: 256 (order: 0, 4096 bytes)
- UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- NET: Registered protocol family 1
- pci 0000:01:00.0: Boot video device
- PCI: CLS 32 bytes, default 64
- microcode: CPU0 sig=0xf27, pf=0x4, revision=0x24
- microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- HugeTLB registered 4 MB page size, pre-allocated 0 pages
- msgmni has been set to 1006
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- io scheduler noop registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- Non-volatile memory driver v1.3
- input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
- ACPI: Power Button [PWRB]
- input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
- ACPI: Sleep Button [FUTS]
- input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
- ACPI: Power Button [PWRF]
- ACPI: Fan [FAN] (on)
- thermal LNXTHERM:00: registered as thermal_zone0
- ACPI: Thermal Zone [THRM] (25 C)
- brd: module loaded
- loop: module loaded
- pata_sis 0000:00:02.5: version 0.5.2
- ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
- PCI: setting IRQ 11 as level-triggered
- pata_sis 0000:00:02.5: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
- pata_sis 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller
- scsi0 : pata_sis
- scsi1 : pata_sis
- ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14
- ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15
- i8042: PNP: No PS/2 controller found. Probing ports directly.
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX port at 0x60,0x64 irq 12
- mousedev: PS/2 mouse device common for all mice
- rtc_cmos 00:04: RTC can wake from S4
- rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
- rtc0: alarms up to one year, 242 bytes nvram
- i2c /dev entries driver
- cpuidle: using governor ladder
- cpuidle: using governor menu
- EFI Variables Facility v0.08 2004-May-17
- TCP cubic registered
- NET: Registered protocol family 10
- Using IPI Shortcut mode
- PM: Hibernation image not present or could not be loaded.
- Magic number: 0:761:443
- ata1.00: ATA-6: ST360020A, 3.39, max UDMA/100
- ata1.00: 117231408 sectors, multi 16: LBA
- ata1.01: ATA-7: Maxtor 6E040L0, NAR61590, max UDMA/133
- ata1.01: 80293248 sectors, multi 16: LBA48
- ata1.00: configured for UDMA/100
- ata1.01: configured for UDMA/133
- scsi 0:0:0:0: Direct-Access ATA ST360020A 3.39 PQ: 0 ANSI: 5
- scsi 0:0:1:0: Direct-Access ATA Maxtor 6E040L0 NAR6 PQ: 0 ANSI: 5
- sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
- sd 0:0:0:0: [sda] Write Protect is off
- sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sda: sda1
- sd 0:0:1:0: [sdb] 80293248 512-byte logical blocks: (41.1 GB/38.2 GiB)
- sd 0:0:1:0: [sdb] Write Protect is off
- sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
- sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sd 0:0:0:0: [sda] Attached SCSI disk
- ata2.00: ATAPI: SONY CD-RW CRX225E, QYB2, max UDMA/33
- ata2.01: ATAPI: DVD-ROM BDV316C, VER .20O, max UDMA/33
- ata2.00: configured for UDMA/33
- ata2.01: configured for UDMA/33
- scsi 1:0:0:0: CD-ROM SONY CD-RW CRX225E QYB2 PQ: 0 ANSI: 5
- sr0: scsi3-mmc drive: 118x/52x writer cd/rw xa/form2 cdda tray
- cdrom: Uniform CD-ROM driver Revision: 3.20
- sr 1:0:0:0: Attached scsi CD-ROM sr0
- scsi 1:0:1:0: CD-ROM DVD-16X DVD-ROM BDV316C .20O PQ: 0 ANSI: 5
- sr1: scsi3-mmc drive: 0x/1x cd/rw xa/form2 cdda tray
- sr 1:0:1:0: Attached scsi CD-ROM sr1
- Refined TSC clocksource calibration: 2390.293 MHz.
- Switching to clocksource tsc
- sdb: sdb1
- sd 0:0:1:0: [sdb] Attached SCSI disk
- EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
- devtmpfs: mounted
- Freeing unused kernel memory: 320k freed
- udev[116]: starting version 164
- ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 3
- PCI: setting IRQ 3 as level-triggered
- b43-pci-bridge 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 3 (level, low) -> IRQ 3
- ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243)
- ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243)
- ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243)
- ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)
- ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243)
- ssb: Sonics Silicon Backplane found on PCI device 0000:00:06.0
- sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x10c0
- 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
- 8139cp 0000:00:0f.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
- 8139too: 8139too Fast Ethernet driver 0.9.28
- ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
- PCI: setting IRQ 5 as level-triggered
- 8139too 0000:00:0f.0: PCI INT A -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
- 8139too 0000:00:0f.0: eth0: RealTek RTL8139 at 0xe084c000, 00:10:dc:92:ec:0a, IRQ 5
- firewire_ohci 0000:00:02.3: PCI INT B -> Link[LNKB] -> GSI 3 (level, low) -> IRQ 3
- firewire_ohci: Added fw-ohci device 0000:00:02.3, OHCI v1.0, 4 IR + 6 IT contexts, quirks 0x0
- sd 0:0:0:0: Attached scsi generic sg0 type 0
- sd 0:0:1:0: Attached scsi generic sg1 type 0
- sr 1:0:0:0: Attached scsi generic sg2 type 5
- sr 1:0:1:0: Attached scsi generic sg3 type 5
- Linux agpgart interface v0.103
- snd_intel8x0 0000:00:02.7: PCI INT C -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
- firewire_core: created device fw0: GUID 000010dc000ec683, S400
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
- ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- ohci_hcd: block sizes: ed 64 td 64
- intel8x0_measure_ac97_clock: measured 50697 usecs (2439 samples)
- intel8x0: clocking to 48000
- ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9
- PCI: setting IRQ 9 as level-triggered
- ehci_hcd 0000:00:03.3: PCI INT D -> Link[LNKH] -> GSI 9 (level, low) -> IRQ 9
- ehci_hcd 0000:00:03.3: EHCI Host Controller
- ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
- ehci_hcd 0000:00:03.3: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
- ehci_hcd 0000:00:03.3: reset hcc_params 7070 thresh 7 uframes 1024
- ehci_hcd 0000:00:03.3: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- ehci_hcd 0000:00:03.3: MWI active
- ehci_hcd 0000:00:03.3: supports USB remote wakeup
- ehci_hcd 0000:00:03.3: irq 9, io mem 0xec125000
- ehci_hcd 0000:00:03.3: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- ehci_hcd 0000:00:03.3: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
- ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
- usb usb1: default language 0x0409
- usb usb1: udev 1, busnum 1, minor = 0
- usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb1: Product: EHCI Host Controller
- usb usb1: Manufacturer: Linux 3.2.1-gentoo-r2 ehci_hcd
- usb usb1: SerialNumber: 0000:00:03.3
- usb usb1: usb_probe_device
- usb usb1: configuration #1 chosen from 1 choice
- usb usb1: adding 1-0:1.0 (config #1, interface 0)
- hub 1-0:1.0: usb_probe_interface
- hub 1-0:1.0: usb_probe_interface - got id
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 6 ports detected
- hub 1-0:1.0: standalone hub
- hub 1-0:1.0: no power switching (usb 1.0)
- hub 1-0:1.0: individual port over-current protection
- hub 1-0:1.0: power on to power good time: 20ms
- hub 1-0:1.0: local power source is good
- hub 1-0:1.0: trying to enable port power on non-switchable hub
- agpgart-sis 0000:00:00.0: SiS chipset [1039/0651]
- agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xe8000000
- ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 3
- ohci_hcd 0000:00:03.0: PCI INT A -> Link[LNKE] -> GSI 3 (level, low) -> IRQ 3
- ohci_hcd 0000:00:03.0: OHCI Host Controller
- ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
- ohci_hcd 0000:00:03.0: created debug files
- ohci_hcd 0000:00:03.0: supports USB remote wakeup
- ohci_hcd 0000:00:03.0: irq 3, io mem 0xec122000
- cfg80211: Calling CRDA to update world regulatory domain
- ohci_hcd 0000:00:03.0: enabling initreset quirk
- ohci_hcd 0000:00:03.0: OHCI controller state
- ohci_hcd 0000:00:03.0: OHCI 1.0, NO legacy support registers
- ohci_hcd 0000:00:03.0: control 0x283 RWC HCFS=operational CBSR=3
- ohci_hcd 0000:00:03.0: cmdstatus 0x00000 SOC=0
- ohci_hcd 0000:00:03.0: intrstatus 0x00000004 SF
- ohci_hcd 0000:00:03.0: intrenable 0x8000004a MIE RHSC RD WDH
- ohci_hcd 0000:00:03.0: hcca frame #0003
- ohci_hcd 0000:00:03.0: roothub.a 01001202 POTPGT=1 NOCP NPS NDP=2(2)
- ohci_hcd 0000:00:03.0: roothub.b 00000000 PPCM=0000 DR=0000
- ohci_hcd 0000:00:03.0: roothub.status 00008000 DRWE
- ohci_hcd 0000:00:03.0: roothub.portstatus [0] 0x00000100 PPS
- ohci_hcd 0000:00:03.0: roothub.portstatus [1] 0x00000100 PPS
- usb usb2: default language 0x0409
- usb usb2: udev 1, busnum 2, minor = 128
- usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb2: Product: OHCI Host Controller
- usb usb2: Manufacturer: Linux 3.2.1-gentoo-r2 ohci_hcd
- usb usb2: SerialNumber: 0000:00:03.0
- usb usb2: usb_probe_device
- usb usb2: configuration #1 chosen from 1 choice
- usb usb2: adding 2-0:1.0 (config #1, interface 0)
- hub 2-0:1.0: usb_probe_interface
- hub 2-0:1.0: usb_probe_interface - got id
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 2 ports detected
- hub 2-0:1.0: standalone hub
- hub 2-0:1.0: no power switching (usb 1.0)
- hub 2-0:1.0: no over-current protection
- hub 2-0:1.0: power on to power good time: 2ms
- hub 2-0:1.0: local power source is good
- hub 2-0:1.0: trying to enable port power on non-switchable hub
- ehci_hcd 0000:00:03.3: HS companion for 0000:00:03.0
- ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5
- ohci_hcd 0000:00:03.1: PCI INT B -> Link[LNKF] -> GSI 5 (level, low) -> IRQ 5
- ohci_hcd 0000:00:03.1: OHCI Host Controller
- ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
- ohci_hcd 0000:00:03.1: created debug files
- ohci_hcd 0000:00:03.1: supports USB remote wakeup
- ohci_hcd 0000:00:03.1: irq 5, io mem 0xec123000
- ehci_hcd 0000:00:03.3: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT
- hub 1-0:1.0: port 2: status 0501 change 0001
- ehci_hcd 0000:00:03.3: GetStatus port:5 status 001803 0 ACK POWER sig=j CSC CONNECT
- hub 1-0:1.0: port 5: status 0501 change 0001
- ehci_hcd 0000:00:03.3: GetStatus port:6 status 001403 0 ACK POWER sig=k CSC CONNECT
- hub 1-0:1.0: port 6: status 0501 change 0001
- ohci_hcd 0000:00:03.1: enabling initreset quirk
- ohci_hcd 0000:00:03.1: OHCI controller state
- ohci_hcd 0000:00:03.1: OHCI 1.0, NO legacy support registers
- ohci_hcd 0000:00:03.1: control 0x283 RWC HCFS=operational CBSR=3
- ohci_hcd 0000:00:03.1: cmdstatus 0x00000 SOC=0
- ohci_hcd 0000:00:03.1: intrstatus 0x00000004 SF
- ohci_hcd 0000:00:03.1: intrenable 0x8000004a MIE RHSC RD WDH
- ohci_hcd 0000:00:03.1: hcca frame #0003
- ohci_hcd 0000:00:03.1: roothub.a 01001202 POTPGT=1 NOCP NPS NDP=2(2)
- ohci_hcd 0000:00:03.1: roothub.b 00000000 PPCM=0000 DR=0000
- ohci_hcd 0000:00:03.1: roothub.status 00008000 DRWE
- ohci_hcd 0000:00:03.1: roothub.portstatus [0] 0x00000100 PPS
- ohci_hcd 0000:00:03.1: roothub.portstatus [1] 0x00000100 PPS
- usb usb3: default language 0x0409
- usb usb3: udev 1, busnum 3, minor = 256
- usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb3: Product: OHCI Host Controller
- usb usb3: Manufacturer: Linux 3.2.1-gentoo-r2 ohci_hcd
- usb usb3: SerialNumber: 0000:00:03.1
- usb usb3: usb_probe_device
- usb usb3: configuration #1 chosen from 1 choice
- usb usb3: adding 3-0:1.0 (config #1, interface 0)
- hub 3-0:1.0: usb_probe_interface
- hub 3-0:1.0: usb_probe_interface - got id
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 2 ports detected
- hub 3-0:1.0: standalone hub
- hub 3-0:1.0: no power switching (usb 1.0)
- hub 3-0:1.0: no over-current protection
- hub 3-0:1.0: power on to power good time: 2ms
- hub 3-0:1.0: local power source is good
- hub 3-0:1.0: trying to enable port power on non-switchable hub
- ehci_hcd 0000:00:03.3: HS companion for 0000:00:03.1
- ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
- ohci_hcd 0000:00:03.2: PCI INT C -> Link[LNKG] -> GSI 11 (level, low) -> IRQ 11
- ohci_hcd 0000:00:03.2: OHCI Host Controller
- ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
- ohci_hcd 0000:00:03.2: created debug files
- ohci_hcd 0000:00:03.2: supports USB remote wakeup
- ohci_hcd 0000:00:03.2: irq 11, io mem 0xec124000
- hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
- ohci_hcd 0000:00:03.2: enabling initreset quirk
- ohci_hcd 0000:00:03.2: OHCI controller state
- ohci_hcd 0000:00:03.2: OHCI 1.0, NO legacy support registers
- ohci_hcd 0000:00:03.2: control 0x283 RWC HCFS=operational CBSR=3
- ohci_hcd 0000:00:03.2: cmdstatus 0x00000 SOC=0
- ohci_hcd 0000:00:03.2: intrstatus 0x00000004 SF
- ohci_hcd 0000:00:03.2: intrenable 0x8000004a MIE RHSC RD WDH
- ohci_hcd 0000:00:03.2: hcca frame #0003
- ohci_hcd 0000:00:03.2: roothub.a 01001202 POTPGT=1 NOCP NPS NDP=2(2)
- ohci_hcd 0000:00:03.2: roothub.b 00000000 PPCM=0000 DR=0000
- ohci_hcd 0000:00:03.2: roothub.status 00008000 DRWE
- ohci_hcd 0000:00:03.2: roothub.portstatus [0] 0x00000100 PPS
- ohci_hcd 0000:00:03.2: roothub.portstatus [1] 0x00000100 PPS
- usb usb4: default language 0x0409
- usb usb4: udev 1, busnum 4, minor = 384
- usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb4: Product: OHCI Host Controller
- usb usb4: Manufacturer: Linux 3.2.1-gentoo-r2 ohci_hcd
- usb usb4: SerialNumber: 0000:00:03.2
- usb usb4: usb_probe_device
- usb usb4: configuration #1 chosen from 1 choice
- usb usb4: adding 4-0:1.0 (config #1, interface 0)
- hub 4-0:1.0: usb_probe_interface
- hub 4-0:1.0: usb_probe_interface - got id
- hub 4-0:1.0: USB hub found
- hub 4-0:1.0: 2 ports detected
- hub 4-0:1.0: standalone hub
- hub 4-0:1.0: no power switching (usb 1.0)
- hub 4-0:1.0: no over-current protection
- hub 4-0:1.0: power on to power good time: 2ms
- hub 4-0:1.0: local power source is good
- hub 4-0:1.0: trying to enable port power on non-switchable hub
- ehci_hcd 0000:00:03.3: HS companion for 0000:00:03.2
- hub 1-0:1.0: state 7 ports 6 chg 0064 evt 0000
- hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
- ehci_hcd 0000:00:03.3: port 2 full speed --> companion
- ehci_hcd 0000:00:03.3: GetStatus port:2 status 003801 0 ACK POWER OWNER sig=j CONNECT
- hub 1-0:1.0: port 2 not reset yet, waiting 50ms
- ehci_hcd 0000:00:03.3: GetStatus port:2 status 003002 0 ACK POWER OWNER sig=se0 CSC
- hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
- ehci_hcd 0000:00:03.3: port 5 high speed
- ehci_hcd 0000:00:03.3: GetStatus port:5 status 001005 0 ACK POWER sig=se0 PE CONNECT
- usb 1-5: new high-speed USB device number 3 using ehci_hcd
- ehci_hcd 0000:00:03.3: port 5 high speed
- ehci_hcd 0000:00:03.3: GetStatus port:5 status 001005 0 ACK POWER sig=se0 PE CONNECT
- usb 1-5: default language 0x0409
- usb 1-5: udev 3, busnum 1, minor = 2
- usb 1-5: New USB device found, idVendor=1307, idProduct=0165
- usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- usb 1-5: Product: USB Flash Drive
- usb 1-5: Manufacturer: USB 2.0
- usb 1-5: SerialNumber: 25a67534229119
- usb 1-5: usb_probe_device
- usb 1-5: configuration #1 chosen from 1 choice
- usb 1-5: adding 1-5:1.0 (config #1, interface 0)
- hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
- ehci_hcd 0000:00:03.3: port 6 low speed --> companion
- ehci_hcd 0000:00:03.3: GetStatus port:6 status 003002 0 ACK POWER OWNER sig=se0 CSC
- hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002
- ohci_hcd 0000:00:03.1: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
- hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
- hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
- ohci_hcd 0000:00:03.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
- usb 3-1: new full-speed USB device number 2 using ohci_hcd
- ohci_hcd 0000:00:03.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
- usb 3-1: ep0 maxpacket = 8
- usb 3-1: default language 0x0409
- usb 3-1: udev 2, busnum 3, minor = 257
- usb 3-1: New USB device found, idVendor=0416, idProduct=7721
- usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- usb 3-1: Product: USB MS/SD Card Readdr.
- usb 3-1: usb_probe_device
- usb 3-1: configuration #1 chosen from 1 choice
- usb 3-1: adding 3-1:1.0 (config #1, interface 0)
- usb 3-1: adding 3-1:1.1 (config #1, interface 1)
- hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
- hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004
- ohci_hcd 0000:00:03.2: GetStatus roothub.portstatus [1] = 0x00010301 CSC LSDA PPS CCS
- hub 4-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
- hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
- ohci_hcd 0000:00:03.2: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
- usb 4-2: new low-speed USB device number 2 using ohci_hcd
- ohci_hcd 0000:00:03.2: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
- usb 4-2: skipped 1 descriptor after interface
- usb 4-2: default language 0x0409
- usb 4-2: udev 2, busnum 4, minor = 385
- usb 4-2: New USB device found, idVendor=046d, idProduct=c312
- usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- usb 4-2: Product: USB Multimedia Keyboard
- usb 4-2: Manufacturer: LITEON Technology
- usb 4-2: usb_probe_device
- usb 4-2: configuration #1 chosen from 1 choice
- usb 4-2: adding 4-2:1.0 (config #1, interface 0)
- hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002
- hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004
- ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- ata1.01: BMDMA stat 0x64
- ata1.01: failed command: READ DMA
- ata1.01: cmd c8/00:08:00:08:00/00:00:00:00:00/f0 tag 0 dma 4096 in
- res 51/40:00:00:08:00/00:00:00:00:00/f0 Emask 0x9 (media error)
- ata1.01: status: { DRDY ERR }
- ata1.01: error: { UNC }
- ata1.00: configured for UDMA/100
- ata1.01: configured for UDMA/133
- ata1: EH complete
- ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- ata1.01: BMDMA stat 0x64
- ata1.01: failed command: READ DMA
- ata1.01: cmd c8/00:08:00:08:00/00:00:00:00:00/f0 tag 0 dma 4096 in
- res 51/40:00:00:08:00/00:00:00:00:00/f0 Emask 0x9 (media error)
- ata1.01: status: { DRDY ERR }
- ata1.01: error: { UNC }
- ata1.00: configured for UDMA/100
- ata1.01: configured for UDMA/133
- ata1: EH complete
- ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- ata1.01: BMDMA stat 0x64
- ata1.01: failed command: READ DMA
- ata1.01: cmd c8/00:08:00:08:00/00:00:00:00:00/f0 tag 0 dma 4096 in
- res 51/40:00:00:08:00/00:00:00:00:00/f0 Emask 0x9 (media error)
- ata1.01: status: { DRDY ERR }
- ata1.01: error: { UNC }
- ata1.00: configured for UDMA/100
- ata1.01: configured for UDMA/133
- ata1: EH complete
- ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- ata1.01: BMDMA stat 0x64
- ata1.01: failed command: READ DMA
- ata1.01: cmd c8/00:08:00:08:00/00:00:00:00:00/f0 tag 0 dma 4096 in
- res 51/40:00:00:08:00/00:00:00:00:00/f0 Emask 0x9 (media error)
- ata1.01: status: { DRDY ERR }
- ata1.01: error: { UNC }
- ata1.00: configured for UDMA/100
- ata1.01: configured for UDMA/133
- ata1: EH complete
- ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- ata1.01: BMDMA stat 0x64
- ata1.01: failed command: READ DMA
- ata1.01: cmd c8/00:08:00:08:00/00:00:00:00:00/f0 tag 0 dma 4096 in
- res 51/40:00:00:08:00/00:00:00:00:00/f0 Emask 0x9 (media error)
- ata1.01: status: { DRDY ERR }
- ata1.01: error: { UNC }
- ata1.00: configured for UDMA/100
- ata1.01: configured for UDMA/133
- ata1: EH complete
- ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- ata1.01: BMDMA stat 0x64
- ata1.01: failed command: READ DMA
- ata1.01: cmd c8/00:08:00:08:00/00:00:00:00:00/f0 tag 0 dma 4096 in
- res 51/40:00:00:08:00/00:00:00:00:00/f0 Emask 0x9 (media error)
- ata1.01: status: { DRDY ERR }
- ata1.01: error: { UNC }
- ata1.00: configured for UDMA/100
- ata1.01: configured for UDMA/133
- sd 0:0:1:0: [sdb] Unhandled sense code
- sd 0:0:1:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- sd 0:0:1:0: [sdb] Sense Key : Medium Error [current] [descriptor]
- Descriptor sense data with sense descriptors (in hex):
- 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
- 00 00 08 00
- sd 0:0:1:0: [sdb] Add. Sense: Unrecovered read error - auto reallocate failed
- sd 0:0:1:0: [sdb] CDB: Read(10): 28 00 00 00 08 00 00 00 08 00
- end_request: I/O error, dev sdb, sector 2048
- Buffer I/O error on device sdb, logical block 256
- ata1: EH complete
- ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- ata1.01: BMDMA stat 0x64
- ata1.01: failed command: READ DMA
- ata1.01: cmd c8/00:08:00:08:00/00:00:00:00:00/f0 tag 0 dma 4096 in
- res 51/40:00:00:08:00/00:00:00:00:00/f0 Emask 0x9 (media error)
- ata1.01: status: { DRDY ERR }
- ata1.01: error: { UNC }
- ata1.00: configured for UDMA/100
- ata1.01: configured for UDMA/133
- ata1: EH complete
- ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- ata1.01: BMDMA stat 0x64
- ata1.01: failed command: READ DMA
- ata1.01: cmd c8/00:08:00:08:00/00:00:00:00:00/f0 tag 0 dma 4096 in
- res 51/40:00:00:08:00/00:00:00:00:00/f0 Emask 0x9 (media error)
- ata1.01: status: { DRDY ERR }
- ata1.01: error: { UNC }
- ata1.00: configured for UDMA/100
- ata1.01: configured for UDMA/133
- ata1: EH complete
- ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- ata1.01: BMDMA stat 0x64
- ata1.01: failed command: READ DMA
- ata1.01: cmd c8/00:08:00:08:00/00:00:00:00:00/f0 tag 0 dma 4096 in
- res 51/40:00:00:08:00/00:00:00:00:00/f0 Emask 0x9 (media error)
- ata1.01: status: { DRDY ERR }
- ata1.01: error: { UNC }
- ata1.00: configured for UDMA/100
- ata1.01: configured for UDMA/133
- ata1: EH complete
- ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- ata1.01: BMDMA stat 0x64
- ata1.01: failed command: READ DMA
- ata1.01: cmd c8/00:08:00:08:00/00:00:00:00:00/f0 tag 0 dma 4096 in
- res 51/40:00:00:08:00/00:00:00:00:00/f0 Emask 0x9 (media error)
- ata1.01: status: { DRDY ERR }
- ata1.01: error: { UNC }
- ata1.00: configured for UDMA/100
- ata1.01: configured for UDMA/133
- ata1: EH complete
- ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- ata1.01: BMDMA stat 0x64
- ata1.01: failed command: READ DMA
- ata1.01: cmd c8/00:08:00:08:00/00:00:00:00:00/f0 tag 0 dma 4096 in
- res 51/40:00:00:08:00/00:00:00:00:00/f0 Emask 0x9 (media error)
- ata1.01: status: { DRDY ERR }
- ata1.01: error: { UNC }
- ata1.00: configured for UDMA/100
- ata1.01: configured for UDMA/133
- ata1: EH complete
- ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- ata1.01: BMDMA stat 0x64
- ata1.01: failed command: READ DMA
- ata1.01: cmd c8/00:08:00:08:00/00:00:00:00:00/f0 tag 0 dma 4096 in
- res 51/40:00:00:08:00/00:00:00:00:00/f0 Emask 0x9 (media error)
- ata1.01: status: { DRDY ERR }
- ata1.01: error: { UNC }
- ata1.00: configured for UDMA/100
- ata1.01: configured for UDMA/133
- sd 0:0:1:0: [sdb] Unhandled sense code
- sd 0:0:1:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- sd 0:0:1:0: [sdb] Sense Key : Medium Error [current] [descriptor]
- Descriptor sense data with sense descriptors (in hex):
- 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
- 00 00 08 00
- sd 0:0:1:0: [sdb] Add. Sense: Unrecovered read error - auto reallocate failed
- sd 0:0:1:0: [sdb] CDB: Read(10): 28 00 00 00 08 00 00 00 08 00
- end_request: I/O error, dev sdb, sector 2048
- Buffer I/O error on device sdb, logical block 256
- ata1: EH complete
- Initializing USB Mass Storage driver...
- usb-storage 1-5:1.0: usb_probe_interface
- usb-storage 1-5:1.0: usb_probe_interface - got id
- scsi2 : usb-storage 1-5:1.0
- usb-storage 3-1:1.0: usb_probe_interface
- usb-storage 3-1:1.0: usb_probe_interface - got id
- scsi3 : usb-storage 3-1:1.0
- usb-storage 3-1:1.1: usb_probe_interface
- usb-storage 3-1:1.1: usb_probe_interface - got id
- scsi4 : usb-storage 3-1:1.1
- usbcore: registered new interface driver usb-storage
- USB Mass Storage support registered.
- usbhid 4-2:1.0: usb_probe_interface
- usbhid 4-2:1.0: usb_probe_interface - got id
- input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:03.2/usb4/4-2/4-2:1.0/input/input3
- generic-usb 0003:046D:C312.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:03.2-2/input0
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- snd_emu10k1 0000:00:07.0: PCI INT A -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
- b43-phy0: Broadcom 4306 WLAN found (core revision 5)
- [drm] Initialized drm 1.1.0 20060810
- b43-phy0 debug: Found PHY: Analog 2, Type 2, Revision 2
- b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
- b43-phy0 debug: DebugFS (CONFIG_DEBUG_FS) not enabled in kernel config
- ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- Registered led device: b43-phy0::tx
- Registered led device: b43-phy0::rx
- Registered led device: b43-phy0::radio
- Broadcom 43xx driver loaded [ Features: PL ]
- [drm] radeon defaulting to kernel modesetting.
- [drm] radeon kernel modesetting enabled.
- radeon 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
- [drm] initializing kernel modesetting (RV200 0x1002:0x5157 0x1002:0x0F2A).
- [drm] register mmio base: 0xEC020000
- [drm] register mmio size: 65536
- agpgart-sis 0000:00:00.0: AGP 2.0 bridge
- agpgart-sis 0000:00:00.0: putting AGP V2 device into 4x mode
- radeon 0000:01:00.0: putting AGP V2 device into 4x mode
- radeon 0000:01:00.0: GTT: 64M 0xE8000000 - 0xEBFFFFFF
- radeon 0000:01:00.0: VRAM: 128M 0x00000000E0000000 - 0x00000000E7FFFFFF (64M used)
- [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [drm] Driver supports precise vblank timestamp query.
- [drm] radeon: irq initialized.
- [drm] Detected VRAM RAM=128M, BAR=128M
- [drm] RAM width 128bits DDR
- [TTM] Zone kernel: Available graphics memory: 257730 kiB.
- [TTM] Initializing pool allocator.
- [drm] radeon: 64M of VRAM memory ready
- [drm] radeon: 64M of GTT memory ready.
- radeon 0000:01:00.0: WB disabled
- [drm] Loading R100 Microcode
- [drm] radeon: ring at 0x00000000E8001000
- [drm] ring test succeeded in 0 usecs
- [drm] radeon: ib pool ready.
- [drm] ib test succeeded in 0 usecs
- [drm] Radeon Display Connectors
- [drm] Connector 0:
- [drm] DVI-I
- [drm] HPD1
- [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
- [drm] Encoders:
- [drm] CRT1: INTERNAL_DAC1
- [drm] DFP1: INTERNAL_TMDS1
- [drm] Connector 1:
- [drm] S-video
- [drm] Encoders:
- [drm] TV1: INTERNAL_DAC2
- scsi 2:0:0:0: Direct-Access USB 2.0 USB Flash Drive 0.00 PQ: 0 ANSI: 2
- sd 2:0:0:0: Attached scsi generic sg4 type 0
- sd 2:0:0:0: [sdc] 7892040 512-byte logical blocks: (4.04 GB/3.76 GiB)
- sd 2:0:0:0: [sdc] Write Protect is off
- sd 2:0:0:0: [sdc] Mode Sense: 00 00 00 00
- sd 2:0:0:0: [sdc] Asking for cache data failed
- sd 2:0:0:0: [sdc] Assuming drive cache: write through
- scsi 3:0:0:0: Direct-Access General USB Disk Drive 1.00 PQ: 0 ANSI: 0 CCS
- scsi 4:0:0:0: Direct-Access General USB Disk Drive 1.00 PQ: 0 ANSI: 0 CCS
- sd 3:0:0:0: Attached scsi generic sg5 type 0
- sd 4:0:0:0: Attached scsi generic sg6 type 0
- sd 2:0:0:0: [sdc] Asking for cache data failed
- sd 2:0:0:0: [sdc] Assuming drive cache: write through
- sd 4:0:0:0: [sde] Attached SCSI removable disk
- sd 3:0:0:0: [sdd] Attached SCSI removable disk
- [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 160
- Raw EDID:
- a0 ff ff ff ff ff ff 00 26 34 03 05 33 cd 31 01
- 2a 0e 01 03 08 1e 16 64 e8 d5 ed a0 5a 4a 98 24
- 16 4d 53 ad 4e 00 01 01 01 01 01 01 01 01 01 01
- 01 01 01 01 01 01 c3 1e 00 20 41 00 20 30 10 60
- 13 00 2c dc 10 00 00 1e 56 13 20 00 31 58 19 20
- 10 50 13 00 2c dc 10 00 00 1c 00 00 00 fd 00 38
- 4b 1f 3c ff 00 0a 20 20 20 20 20 20 00 00 00 fc
- 00 4c 35 30 53 0a 20 20 20 20 20 20 20 20 00 40
- [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 160
- Raw EDID:
- a0 ff ff ff ff ff ff 00 26 34 03 05 33 cd 31 01
- 2a 0e 01 03 08 1e 16 64 e8 d5 ed a0 5a 4a 98 24
- 16 4d 53 ad 4e 00 01 01 01 01 01 01 01 01 01 01
- 01 01 01 01 01 01 c3 1e 00 20 41 00 20 30 10 60
- 13 00 2c dc 10 00 00 1e 56 13 20 00 31 58 19 20
- 10 50 13 00 2c dc 10 00 00 1c 00 00 00 fd 00 38
- 4b 1f 3c ff 00 0a 20 20 20 20 20 20 00 00 00 fc
- 00 4c 35 30 53 0a 20 20 20 20 20 20 20 20 00 40
- sdc: sdc1 sdc2
- sd 2:0:0:0: [sdc] Asking for cache data failed
- sd 2:0:0:0: [sdc] Assuming drive cache: write through
- sd 2:0:0:0: [sdc] Attached SCSI removable disk
- [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 160
- Raw EDID:
- a0 ff ff ff ff ff ff 00 26 34 03 05 33 cd 31 01
- 2a 0e 01 03 08 1e 16 64 e8 d5 ed a0 5a 4a 98 24
- 16 4d 53 ad 4e 00 01 01 01 01 01 01 01 01 01 01
- 01 01 01 01 01 01 c3 1e 00 20 41 00 20 30 10 60
- 13 00 2c dc 10 00 00 1e 56 13 20 00 31 58 19 20
- 10 50 13 00 2c dc 10 00 00 1c 00 00 00 fd 00 38
- 4b 1f 3c ff 00 0a 20 20 20 20 20 20 00 00 00 fc
- 00 4c 35 30 53 0a 20 20 20 20 20 20 20 20 00 40
- [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 160
- Raw EDID:
- a0 ff ff ff ff ff ff 00 26 34 03 05 33 cd 31 01
- 2a 0e 01 03 08 1e 16 64 e8 d5 ed a0 5a 4a 98 24
- 16 4d 53 ad 4e 00 01 01 01 01 01 01 01 01 01 01
- 01 01 01 01 01 01 c3 1e 00 20 41 00 20 30 10 60
- 13 00 2c dc 10 00 00 1e 56 13 20 00 31 58 19 20
- 10 50 13 00 2c dc 10 00 00 1c 00 00 00 fd 00 38
- 4b 1f 3c ff 00 0a 20 20 20 20 20 20 00 00 00 fc
- 00 4c 35 30 53 0a 20 20 20 20 20 20 20 20 00 40
- radeon 0000:01:00.0: DVI-I-1: EDID block 0 invalid.
- [drm:radeon_dvi_detect] *ERROR* DVI-I-1: probed a monitor but no|invalid EDID
- [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 160
- Raw EDID:
- a0 ff ff ff ff ff ff 00 26 34 03 05 33 cd 31 01
- 2a 0e 01 03 08 1e 16 64 e8 d5 ed a0 5a 4a 98 24
- 16 4d 53 ad 4e 00 01 01 01 01 01 01 01 01 01 01
- 01 01 01 01 01 01 c3 1e 00 20 41 00 20 30 10 60
- 13 00 2c dc 10 00 00 1e 56 13 20 00 31 58 19 20
- 10 50 13 00 2c dc 10 00 00 1c 00 00 00 fd 00 38
- 4b 1f 3c ff 00 0a 20 20 20 20 20 20 00 00 00 fc
- 00 4c 35 30 53 0a 20 20 20 20 20 20 20 20 00 40
- [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 160
- Raw EDID:
- a0 ff ff ff ff ff ff 00 26 34 03 05 33 cd 31 01
- 2a 0e 01 03 08 1e 16 64 e8 d5 ed a0 5a 4a 98 24
- 16 4d 53 ad 4e 00 01 01 01 01 01 01 01 01 01 01
- 01 01 01 01 01 01 c3 1e 00 20 41 00 20 30 10 60
- 13 00 2c dc 10 00 00 1e 56 13 20 00 31 58 19 20
- 10 50 13 00 2c dc 10 00 00 1c 00 00 00 fd 00 38
- 4b 1f 3c ff 00 0a 20 20 20 20 20 20 00 00 00 fc
- 00 4c 35 30 53 0a 20 20 20 20 20 20 20 20 00 40
- [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 160
- Raw EDID:
- a0 ff ff ff ff ff ff 00 26 34 03 05 33 cd 31 01
- 2a 0e 01 03 08 1e 16 64 e8 d5 ed a0 5a 4a 98 24
- 16 4d 53 ad 4e 00 01 01 01 01 01 01 01 01 01 01
- 01 01 01 01 01 01 c3 1e 00 20 41 00 20 30 10 60
- 13 00 2c dc 10 00 00 1e 56 13 20 00 31 58 19 20
- 10 50 13 00 2c dc 10 00 00 1c 00 00 00 fd 00 38
- 4b 1f 3c ff 00 0a 20 20 20 20 20 20 00 00 00 fc
- 00 4c 35 30 53 0a 20 20 20 20 20 20 20 20 00 40
- [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 160
- Raw EDID:
- a0 ff ff ff ff ff ff 00 26 34 03 05 33 cd 31 01
- 2a 0e 01 03 08 1e 16 64 e8 d5 ed a0 5a 4a 98 24
- 16 4d 53 ad 4e 00 01 01 01 01 01 01 01 01 01 01
- 01 01 01 01 01 01 c3 1e 00 20 41 00 20 30 10 60
- 13 00 2c dc 10 00 00 1e 56 13 20 00 31 58 19 20
- 10 50 13 00 2c dc 10 00 00 1c 00 00 00 fd 00 38
- 4b 1f 3c ff 00 0a 20 20 20 20 20 20 00 00 00 fc
- 00 4c 35 30 53 0a 20 20 20 20 20 20 20 20 00 40
- radeon 0000:01:00.0: DVI-I-1: EDID block 0 invalid.
- [drm] fb mappable at 0xE0040000
- [drm] vram apper at 0xE0000000
- [drm] size 3145728
- [drm] fb depth is 24
- [drm] pitch is 4096
- fbcon: radeondrmfb (fb0) is primary device
- Console: switching to colour frame buffer device 128x48
- fb0: radeondrmfb frame buffer device
- drm: registered panic notifier
- [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
- EXT4-fs (sda1): re-mounted. Opts: (null)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement