Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- SoC DRAM: 16 MB
- relocate_code Pointer at: 80fb0000
- flash_protect ON: from 0xBF000000 to 0xBF01D733
- flash_protect ON: from 0xBF030000 to 0xBF030FFF
- *** Warning - bad CRC, using default environment
- ============================================
- Ralink UBoot Version: 3.3
- --------------------------------------------
- ASIC 3052_MP2 (Port5<->None)
- DRAM component: 128 Mbits SDR
- DRAM bus: 16 bit
- Total memory: 16 MBytes
- Flash component: NOR Flash
- Date:Nov 3 2009 Time:18:58:13
- ============================================
- icache: sets:256, ways:4, linesz:32 ,total:32768
- dcache: sets:128, ways:4, linesz:32 ,total:16384
- ##### The CPU freq = 384 MHZ ####
- SDRAM bus set to 16 bit
- SDRAM size =16 Mbytes
- Please choose the operation:
- 1: Load system code to SDRAM via TFTP.
- 2: Load system code then write to Flash via TFTP.
- 3: Boot system code via Flash (default).
- 4: Entr boot command line interface.
- 6: Load whole flash then write to Flash via TFTP.
- 9: Load Boot Loader code then write to Flash via TFTP.
- You choosed 3
- 0
- 3: System Boot system code via Flash.
- H## Booting image at bf050000 ...
- H Image Name: Linux Kernel Image
- H Created: 2010-08-16 3:11:02 UTC
- H Image Type: MIPS Linux Kernel Image (lzma compressed)
- H Data Size: 3834201 Bytes = 3.7 MB
- H Load Address: 80000000
- H Entry Point: 80241000
- H Verifying Checksum ... OK
- H Uncompressing Kernel Image ... OK
- HNo initrd
- H## Transferring control to Linux (at address 80241000) ...
- H## Giving linux memsize in MB, 16
- H
- Starting kernel ...
- H
- LINUX started...
- THIS IS ASIC
- Linux version 2.6.21.7 (zengqingchu@wireless.gj.com) (gcc version 3.4.2) #41
- The CPU feqenuce set to 384 MHz
- CPU revision is: 0001964c
- Determined physical RAM map:
- memory: 01000000 @ 00000000 (usable)
- Built 1 zonelists. Total pages: 4064
- Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock4
- Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
- Primary data cache 16kB, 4-way, linesize 32 bytes.
- Synthesized TLB refill handler (20 instructions).
- Synthesized TLB load handler fastpath (32 instructions).
- Synthesized TLB store handler fastpath (32 instructions).
- Synthesized TLB modify handler fastpath (31 instructions).
- Cache parity protection disabled
- cause = a0800020, status = 1100ff00
- PID hash table entries: 64 (order: 6, 256 bytes)
- calculating r4koff... 00177000(1536000)
- CPU frequency 384.00 MHz
- Using 192.000 MHz high precision timer.
- Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
- Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
- Memory: 13720k/16384k available (2033k kernel code, 2664k reserved, 270k data
- Mount-cache hash table entries: 512
- NET: Registered protocol family 16
- NET: Registered protocol family 2
- Time: MIPS clocksource has been installed.
- IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
- TCP established hash table entries: 512 (order: 0, 4096 bytes)
- TCP bind hash table entries: 512 (order: -1, 2048 bytes)
- TCP: Hash tables configured (established 512 bind 512)
- TCP reno registered
- squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
- squashfs: LZMA suppport for slax.org by jro
- io scheduler noop registered (default)
- Ralink gpio driver initialized
- HDLC line discipline: version $Revision: 1.1.1.1 $, maxframe=4096
- N_HDLC line discipline registered.
- Serial: 8250/16550 driver $Revision: 1.3 $ 2 ports, IRQ sharing disabled
- serial8250: ttyS0 at I/O 0xb0000500 (irq = 37) is a 16550A
- serial8250: ttyS1 at I/O 0xb0000c00 (irq = 12) is a 16550A
- loop: loaded (max 8 devices)
- PPP generic driver version 2.4.2
- PPP BSD Compression module registered
- NET: Registered protocol family 24
- ralink flash device: 0x1000000 at 0x1f000000
- Ralink SoC physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
- Amd/Fujitsu Extended Query Table at 0x0040
- number of CFI chips: 1
- cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
- Creating 6 MTD partitions on "Ralink SoC physically mapped flash":
- 0x00000000-0x00030000 : "Bootloader"
- 0x00030000-0x00040000 : "Config"
- 0x00040000-0x00050000 : "Factory"
- 0x00050000-0x0010c199 : "Kernel"
- mtd: partition "Kernel" doesn't end on an erase block -- force read-only
- 0x0010c199-0x01000000 : "RootFS"
- mtd: partition "RootFS" extends beyond the end of device "Ralink SoC physically
- mtd: partition "RootFS" doesn't start on an erase block boundary -- force read
- 0x00050000-0x01000000 : "Kernel_RootFS"
- mtd: partition "Kernel_RootFS" extends beyond the end of device "Ralink SoC phy
- block2mtd: version $Revision: 1.1.1.1 $
- Netfilter messages via NETLINK v0.30.
- ip_conntrack version 2.4 (128 buckets, 1024 max) - 228 bytes per conntrack
- ip_conntrack_pptp version 3.1 loaded
- ip_conntrack_ipsec loaded
- ip_conntrack_l2tp version 3.1 loaded
- ip_nat_pptp version 3.0 loaded
- ip_nat_ipsec loaded
- ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Linux
- ClusterIP Version 0.8 loaded successfully
- ipt_time loading
- arp_tables: (C) 2002 David S. Miller
- TCP cubic registered
- ---->luotao ipport netspy test Driver.....-->
- NETSPY IPPORT proc module 2.0 initialized
- NET: Registered protocol family 1
- NET: Registered protocol family 17
- 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
- All bugs added by David S. Miller <davem@redhat.com>
- GDMA1_MAC_ADRH -- : 0x00000000
- GDMA1_MAC_ADRL -- : 0x00000000
- Ralink APSoC Ethernet Driver Initilization. v2.00 64 rx/tx descriptors allocat
- GDMA1_MAC_ADRH -- : 0x00000026
- GDMA1_MAC_ADRL -- : 0x752af785
- PROC INIT OK!
- VFS: Mounted root (squashfs filesystem) readonly.
- Freeing unused kernel memory: 116k freed
- init started: BusyBox v1.12.1 (2010-08-16 11:02:59 CST)
- starting pid 12, tty '': '/etc_ro/rcS'
- Algorithmics/MIPS FPU Emulator v1.5
- devpts: called with bogus options
- mount: mounting none on /proc/bus/usb failed: No such file or directory
- /etc_ro/rcS: line 41: crond: not found
- MP AUTOMATION daemon (ver 1.0)
- internet.sh
- starting pid 42, tty '/dev/ttyS1': '/bin/sh'
- BusyBox v1.12.1 (2010-08-16 11:02:59 CST) built-in shell (ash)
- Enter 'help' for a list of built-in commands.
- # Password for 'admin' changed
- insmod: bridge.ko: module not found
- insmod: mii.ko: module not found
- insmod: raeth.ko: module not found
- phy_tx_ring = 0x00803000, tx_ring = 0xa0803000
- phy_rx_ring = 0x00000000, rx_ring = 0x00000000
- RT305x_ESW: Link Status Changed
- CDMA_CSG_CFG = 81000007
- GDMA1_FWD_CFG = 710000
- ifconfig: ioctl 0x8913 failed: No such device
- ifconfig: ioctl 0x8913 failed: No such device
- ifconfig: ioctl 0x8913 failed: No such device
- ifconfig: ioctl 0x8913 failed: No such device
- ifconfig: ioctl 0x8913 failed: No such device
- ifconfig: ioctl 0x8913 failed: No such device
- ifconfig: ioctl 0x8913 failed: No such device
- ifconfig: ioctl 0x8913 failed: No such device
- ifconfig: ioctl 0x8913 failed: No such device
- ifconfig: ioctl 0x8913 failed: No such device
- ifconfig: ioctl 0x8913 failed: No such device
- ifconfig: ioctl 0x8913 failed: No such device
- ifconfig: ioctl 0x8913 failed: No such device
- ifconfig: ioctl 0x8913 failed: No such device
- rmmod: rt2860v2_ap: No such file or directory
- rmmod: rt2860v2_sta: No such file or directory
- Commit crc = 9d93aa8e
- rt2860v2_ap: module license 'unspecified' taints kernel.
- rmmod: ip_nat_pptp: No such file or directory
- rmmod: ip_conntrack_pptp: No such file or directory
- 0x1300 = 00064380
- insmod: 8021q.ko: module not found
- eth2.2: Setting MAC address to 00 26 75 2a f7 86.
- device eth2 entered promiscuous mode
- VLAN (eth2.2): Setting underlying device (eth2) to promiscious mode.
- ifconfig: ioctl 0x8913 failed: No such device
- brctl: bridge br0: No such device or address
- H##### config RT3052 vlan partition (WLLLL) #####
- switch reg write offset=14, value=405555
- switch reg write offset=50, value=2001
- switch reg write offset=54, value=4003
- switch reg write offset=58, value=6005
- switch reg write offset=98, value=7f3f
- switch reg write offset=e4, value=3f
- switch reg write offset=40, value=1002
- switch reg write offset=44, value=4003
- switch reg write offset=48, value=6005
- switch reg write offset=70, value=48444142
- switch reg write offset=74, value=ffffff50
- device ra0 entered promiscuous mode
- brctl: bridge br0: Device or resource busy
- eth2.1: dev_set_promiscuity(master, 1)
- device eth2.1 entered promiscuous mode
- eth2.3: dev_set_promiscuity(master, 1)
- device eth2.3 entered promiscuous mode
- eth2.4: dev_set_promiscuity(master, 1)
- device eth2.4 entered promiscuous mode
- eth2.5: dev_set_promiscuity(master, 1)
- device eth2.5 entered promiscuous mode
- br0: port 5(eth2.5) entering learning state
- br0: port 4(eth2.4) entering learning state
- br0: port 3(eth2.3) entering learning state
- br0: port 2(eth2.1) entering learning state
- br0: port 1(ra0) entering learning state
- ifconfig: ioctl 0x8914 failed: Cannot assign requested address
- ifconfig: ioctl 0x8914 failed: Cannot assign requested address
- /sbin/lan.sh: line 64: hostname: not found
- killall: udhcpd: no process killed
- Set: phy[1].reg[0] = 3900
- Set: phy[2].reg[0] = 3900
- Set: phy[3].reg[0] = 3900
- Set: phy[4].reg[0] = 3900
- Set: phy[1].reg[0] = 3100
- Set: phy[2].reg[0] = 3100
- Set: phy[3].reg[0] = 3100
- RT305x_ESW: Link Status Changed
- Set: phy[4].reg[0] = 3100
- Set: phy[0].reg[0] = 3100
- killall rt2860apd 1>/dev/null 2>&1
- Commit crc = 9d93aa8e
- iptables -F -t filter 1>/dev/null 2>&1
- iptables -D FORWARD -j macipport_filter 1>/dev/null 2>&1
- iptables -F macipport_filter 1>/dev/null 2>&1
- iptables -D FORWARD -j web_filter 1>/dev/null 2>&1
- iptables -F web_filter 1>/dev/null 2>&1
- iptables -P INPUT ACCEPT
- iptables -P OUTPUT ACCEPT
- iptables -P FORWARD ACCEPT
- iptables -t filter -N web_filter 1>/dev/null 2>&1
- iptables -t filter -N macipport_filter 1>/dev/null 2>&1
- iptables -t filter -N port_trigger 1>/dev/null 2>&1
- iptables -t filter -A FORWARD -j web_filter 1>/dev/null 2>&1
- iptables -t filter -A FORWARD -j macipport_filter 1>/dev/null 2>&1
- iptables -t filter -A FORWARD -j port_trigger 1>/dev/null 2>&1
- iptables -A FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmt
- iptables -t filter -A macipport_filter -m state --state RELATED,ESTABLISHED -j
- Warning: can't find "IPPortFilterRules" in flash
- Warning: can't find "MacFilterRules" in flash
- ddos.sh 2> /dev/null
- iptables -t filter -F INPUT
- iptables -t filter -A INPUT -i eth2.2 -p icmp -j ACCEPT
- iptables -A INPUT -i ! eth2.2 -j ACCEPT
- iptables -A INPUT -i eth2.2 -m state --state RELATED,ESTABLISHED -j ACCEPT
- iptables -A INPUT -j DROP
- iptables -t nat -D PREROUTING -j port_forward 1>/dev/null 2>&1
- iptables -t nat -F port_forward 1>/dev/null 2>&1;
- iptables -t nat -X port_forw
- iptables -t nat -D PREROUTING -j DMZ 1>/dev/null 2>&1
- iptables -t nat -F DMZ 1>/dev/null 2>&1; iptables -t nat -X DMZ 1>/dev/null 2>
- iptables -t nat -A PREROUTING -i eth2.2 -d 192.168.2.10/24 -j DROP
- iptables -t nat -N port_forward 1>/dev/null 2>&1; iptables -t nat -I PREROUTING
- iptables -t nat -N DMZ 1>/dev/null 2>&1; iptables -t nat -I PREROUTING 2 -j DMZ
- iptables -t nat -N port_trigger 1>/dev/null 2>&1; iptables -t nat -A PREROUTING
- Warning: can't find "PortForwardRules" in flash
- Warning: can't find "PortTriggerRules" in flash
- iptables -t nat -F POSTROUTING
- nat.sh
- /sbin/firewall_dos.sh 0
- sh: /sbin/firewall_dos.sh: not found
- /sbin/anti-portscan.sh off
- sh: /sbin/anti-portscan.sh: not found
- ntp.sh
- ddns.sh
- route delete 239.255.255.250 1>/dev/null 2>&1
- killall wscd 1>/dev/null 2>&1
- killall -9 wscd 1>/dev/null 2>&1
- iwpriv ra0 set WscConfMode=0 1>/dev/null 2>&1
- iwpriv ra0 set WscConfMode=7
- iwpriv ra0 set WscConfStatus=1
- route add -host 239.255.255.250 dev br0 1>/dev/null 2>&1
- wscd -m 1 -a 192.168.2.1 -i ra0 &
- killall -q klogd
- killall -q syslogd
- syslogd -C8 1>/dev/null 2>&1
- libupnp: using UDP SSDP_PORT = 1900
- klogd 1>/dev/null 2>&1
- killall -q zebra
- killall -q ripd
- /bin/qos_run
- webs: Listening for HTTP requests at address 192.168.2.1
- #
- # br0: topology change detected, propagating
- br0: port 5(eth2.5) entering forwarding state
- br0: topology change detected, propagating
- br0: port 4(eth2.4) entering forwarding state
- br0: topology change detected, propagating
- br0: port 3(eth2.3) entering forwarding state
- br0: topology change detected, propagating
- br0: port 2(eth2.1) entering forwarding state
- br0: topology change detected, propagating
- br0: port 1(ra0) entering forwarding state
- #
- #
- #
- # exit
- process '/bin/sh' (pid 42) exited. Scheduling for restart.
- starting pid 1244, tty '/dev/ttyS1': '/bin/sh'
- BusyBox v1.12.1 (2010-08-16 11:02:59 CST) built-in shell (ash)
- Enter 'help' for a list of built-in commands.
- # quit
- /bin/sh: quit: not found
- # exit
- process '/bin/sh' (pid 1244) exited. Scheduling for restart.
- starting pid 1245, tty '/dev/ttyS1': '/bin/sh'
- BusyBox v1.12.1 (2010-08-16 11:02:59 CST) built-in shell (ash)
- Enter 'help' for a list of built-in commands.
- # ps
- PID USER VSZ STAT COMMAND
- 1 admin 1812 S init
- 2 admin 0 SWN [ksoftirqd/0]
- 3 admin 0 SW [watchdog/0]
- 4 admin 0 SW< [events/0]
- 5 admin 0 SW< [khelper]
- 6 admin 0 SW< [kthread]
- 7 admin 0 SW< [kblockd/0]
- 8 admin 0 SW< [kswapd0]
- 9 admin 0 SW< [aio/0]
- 10 admin 0 SW [mtdblockd]
- 17 admin 1088 S nvram_daemon
- 18 admin 1752 S goahead
- 22 admin 788 S ap_mgrd
- 252 admin 0 SW [RtmpWscTask]
- 390 admin 820 S udhcpc -i eth2.2 -s /sbin/udhcpc.sh -p /var/run/udhcp
- 743 admin 840 S udhcpd /etc/udhcpd.conf
- 888 admin 944 S dnsmasq
- 1205 admin 1616 S wscd -m 1 -a 192.168.2.1 -i ra0
- 1206 admin 1616 S wscd -m 1 -a 192.168.2.1 -i ra0
- 1207 admin 1616 S wscd -m 1 -a 192.168.2.1 -i ra0
- 1208 admin 1616 S wscd -m 1 -a 192.168.2.1 -i ra0
- 1211 admin 1616 S wscd -m 1 -a 192.168.2.1 -i ra0
- 1215 admin 1616 S wscd -m 1 -a 192.168.2.1 -i ra0
- 1216 admin 1616 S wscd -m 1 -a 192.168.2.1 -i ra0
- 1217 admin 1616 S wscd -m 1 -a 192.168.2.1 -i ra0
- 1219 admin 1616 S wscd -m 1 -a 192.168.2.1 -i ra0
- 1222 admin 1816 S syslogd -C8
- 1223 admin 1616 S wscd -m 1 -a 192.168.2.1 -i ra0
- 1226 admin 1808 S klogd
- 1245 admin 1816 S /bin/sh
- 1246 admin 1812 R ps
- # which ps
- /bin/sh: which: not found
- # cd /bin
- # ls -1
- zebra
- wscd
- vi
- upnpd
- upnp_xml.sh
- udhcpd
- udhcpc-discovery
- udhcpc
- touch
- tc
- switch
- strace
- sleep
- sh
- sed
- rt2860apd
- rm
- ripd
- reg
- ralink_init
- qos_run
- ps
- product
- pptp
- pppd
- ping
- nvram_set
- nvram_get
- nvram_daemon
- ntpclient
- mtd_write
- mount
- mkdir
- mii_mgr
- ls
- login
- kill
- iwpriv
- iptables
- ip_qos
- ip
- inadyn
- igmpproxy.sh
- igmpproxy
- grep
- gpio
- goahead
- g++-uc
- ethtool
- echo
- dnsmasq
- dhcpplus
- date
- cp
- chmod
- cat
- busybox
- ated
- ash
- ap_mgrd
- /bin/sh: cd: can't cd to /usr/lib
- # ls
- zebra rt2860apd mtd_write gpio
- wscd rm mount goahead
- vi ripd mkdir g++-uc
- upnpd reg mii_mgr ethtool
- upnp_xml.sh ralink_init ls echo
- udhcpd qos_run login dnsmasq
- udhcpc-discovery ps kill dhcpplus
- udhcpc product iwpriv date
- touch pptp iptables cp
- tc pppd ip_qos chmod
- switch ping ip cat
- strace nvram_set inadyn busybox
- sleep nvram_get igmpproxy.sh ated
- sh nvram_daemon igmpproxy ash
- sed ntpclient grep ap_mgrd
- # ldd
- /bin/sh: ldd: not found
- # ldd /bin/sh
- /bin/sh: ldd: not found
- # [wd
- /bin/sh: [wd: not found
- # pwd
- /bin
- # pwd
- /bin
- # ls
- zebra rt2860apd mtd_write gpio
- wscd rm mount goahead
- vi ripd mkdir g++-uc
- upnpd reg mii_mgr ethtool
- upnp_xml.sh ralink_init ls echo
- udhcpd qos_run login dnsmasq
- udhcpc-discovery ps kill dhcpplus
- udhcpc product iwpriv date
- touch pptp iptables cp
- tc pppd ip_qos chmod
- switch ping ip cat
- strace nvram_set inadyn busybox
- sleep nvram_get igmpproxy.sh ated
- sh nvram_daemon igmpproxy ash
- sed ntpclient grep ap_mgrd
- # lsmod
- Module Size Used by Tainted: P
- rt2860v2_ap 764208 1
- # dmesg
- /bin/sh: dmesg: not found
- # modprobe
- /bin/sh: modprobe: not found
- # cd /sbin
- # ls
- wifi_unload.sh poweroff global.sh
- wan.sh portspeed.sh firewall.sh
- vpn-passthru.sh ntp.sh ddos.sh
- vconfig nat.sh ddns.sh
- udhcpc.sh lsmod config.sh
- tcpdump logread config-vlan.sh
- syslogd lan.sh config-udhcpd.sh
- route l2tpd config-pptp.sh
- rmmod l2tp.sh config-pppoe.sh
- reboot l2tp-control config-l2tp.sh
- radvd klogd config-igmpproxy.sh
- pt_hotplug internet.sh config-dns.sh
- pptp.sh insmod config-alg.sh
- pppoe.sh init chpasswd.sh
- pppoe-relay ifconfig arp
- pppoe-discovery halt
- # netstat -nat
- /bin/sh: netstat: not found
- # ls /dev
- video0 rdm0 ptyp0 mtdblock3 mtd3ro mem acl0
- urandom random pts mtdblock2 mtd3 log ac0
- ttyp1 ram3 ptmx mtdblock1 mtd2ro kmem PCM
- ttyp0 ram2 ppp mtdblock0 mtd2 i2cM0 I2S
- ttyS1 ram1 null mtd5ro mtd1ro hwnat0
- ttyS0 ram0 mtr0 mtd5 mtd1 gpio
- swnat0 ram mtdblock5 mtd4ro mtd0ro flash0
- spiS0 ptyp1 mtdblock4 mtd4 mtd0 console
- # cat /proc
- cat: read error: Is a directory
- # ls
- wifi_unload.sh poweroff global.sh
- wan.sh portspeed.sh firewall.sh
- vpn-passthru.sh ntp.sh ddos.sh
- vconfig nat.sh ddns.sh
- udhcpc.sh lsmod config.sh
- tcpdump logread config-vlan.sh
- syslogd lan.sh config-udhcpd.sh
- route l2tpd config-pptp.sh
- rmmod l2tp.sh config-pppoe.sh
- reboot l2tp-control config-l2tp.sh
- radvd klogd config-igmpproxy.sh
- pt_hotplug internet.sh config-dns.sh
- pptp.sh insmod config-alg.sh
- pppoe.sh init chpasswd.sh
- pppoe-relay ifconfig arp
- pppoe-discovery halt
- # cd /proc
- # ls
- 1257 18 locks tty
- 1245 17 execdomains bus
- 1226 10 mounts sys
- 1223 9 kmsg irq
- 1222 8 devices misc
- 1219 7 cpuinfo igmp_info
- 1217 6 partitions ioports
- 1216 5 stat iomem
- 1215 4 interrupts timer_list
- 1211 3 slabinfo mtd
- 1208 2 buddyinfo algonoff_pptp
- 1207 1 vmstat algonoff_ipsec
- 1206 self zoneinfo algonoff_l2tp
- 1205 loadavg diskstats nat_ipsec
- 888 uptime modules ipport_netspy
- 743 meminfo net rt2880
- 390 version sysvipc
- 252 filesystems fs
- 22 cmdline driver
- # cat iomem
- 00000000-00ffffff : System RAM
- 00000000-001fc597 : Kernel code
- 001fc598-002400bf : Kernel data
- # cat ioports
- b0000500-b000051f : serial
- b0000c00-b0000c1f : serial
- # cat irq
- cat: read error: Is a directory
- # cd irq
- # ls
- 0 9 18 27 36 45 54 63 72 81 90 99 108 117 126
- 1 10 19 28 37 46 55 64 73 82 91 100 109 118 127
- 2 11 20 29 38 47 56 65 74 83 92 101 110 119
- 3 12 21 30 39 48 57 66 75 84 93 102 111 120
- 4 13 22 31 40 49 58 67 76 85 94 103 112 121
- 5 14 23 32 41 50 59 68 77 86 95 104 113 122
- 6 15 24 33 42 51 60 69 78 87 96 105 114 123
- 7 16 25 34 43 52 61 70 79 88 97 106 115 124
- 8 17 26 35 44 53 62 71 80 89 98 107 116 125
- # cat 0
- cat: read error: Is a directory
- # ls
- # ls -al
- dr-xr-xr-x 130 0 0 0 ..
- dr-xr-xr-x 2 0 0 0 .
- # cd ..
- # ls -alR
- ls: illegal option -- R
- BusyBox v1.12.1 (2010-08-16 11:02:59 CST) multi-call binary
- Usage: ls [-1AaCdilnsTwxk] [filenames...]
- # pwd
- /proc/irq
- # ls
- 0 9 18 27 36 45 54 63 72 81 90 99 108 117 126
- 1 10 19 28 37 46 55 64 73 82 91 100 109 118 127
- 2 11 20 29 38 47 56 65 74 83 92 101 110 119
- 3 12 21 30 39 48 57 66 75 84 93 102 111 120
- 4 13 22 31 40 49 58 67 76 85 94 103 112 121
- 5 14 23 32 41 50 59 68 77 86 95 104 113 122
- 6 15 24 33 42 51 60 69 78 87 96 105 114 123
- 7 16 25 34 43 52 61 70 79 88 97 106 115 124
- 8 17 26 35 44 53 62 71 80 89 98 107 116 125
- # dump
- /bin/sh: dump: not found
- # pwd
- /proc/irq
- # cd /
- # ls -R
- ls: illegal option -- R
- BusyBox v1.12.1 (2010-08-16 11:02:59 CST) multi-call binary
- Usage: ls [-1AaCdilnsTwxk] [filenames...]
- # ls -
- ls: -: No such file or directory
- # ls -1
- var
- usr
- tmp
- sys
- sbin
- proc
- mnt
- media
- lib
- init
- home
- etc_ro
- etc
- dev
- bin
- /bin/sh: find: not found
- var tmp sbin mnt lib home etc bin
- usr sys proc media init etc_ro dev
- BusyBox v1.12.1 (2010-08-16 11:02:59 CST) multi-call binary
- Usage: grep [-HhrilLnqvsoeF] PATTERN [FILEs...]
- BusyBox v1.12.1 (2010-08-16 11:02:59 CST) multi-call binary
- Usage: sed [-efinr] pattern [files...]
- # netstat -nat
- /bin/sh: netstat: not found
- /bin/sh: netstat: not found
- # ifconfig
- br0 Link encap:Ethernet HWaddr 00:26:75:2A:F7:85
- inet addr:192.168.2.1 Bcast:192.168.2.255 Mask:255.255.255.0
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:818 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:0
- RX bytes:0 (0.0 B) TX bytes:331200 (323.4 KiB)
- eth2 Link encap:Ethernet HWaddr 00:26:75:2A:F7:85
- UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:3324 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:1000
- RX bytes:0 (0.0 B) TX bytes:1378960 (1.3 MiB)
- Interrupt:3
- eth2.1 Link encap:Ethernet HWaddr 00:26:75:2A:F7:85
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:808 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:0
- RX bytes:0 (0.0 B) TX bytes:331078 (323.3 KiB)
- eth2.2 Link encap:Ethernet HWaddr 00:26:75:2A:F7:86
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:92 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:0
- RX bytes:0 (0.0 B) TX bytes:54648 (53.3 KiB)
- eth2.3 Link encap:Ethernet HWaddr 00:26:75:2A:F7:85
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:808 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:0
- RX bytes:0 (0.0 B) TX bytes:331078 (323.3 KiB)
- eth2.4 Link encap:Ethernet HWaddr 00:26:75:2A:F7:85
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:808 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:0
- RX bytes:0 (0.0 B) TX bytes:331078 (323.3 KiB)
- eth2.5 Link encap:Ethernet HWaddr 00:26:75:2A:F7:85
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:808 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:0
- RX bytes:0 (0.0 B) TX bytes:331078 (323.3 KiB)
- lo Link encap:Local Loopback
- inet addr:127.0.0.1 Mask:255.0.0.0
- UP LOOPBACK RUNNING MTU:16436 Metric:1
- RX packets:14 errors:0 dropped:0 overruns:0 frame:0
- TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:0
- RX bytes:2231 (2.1 KiB) TX bytes:2231 (2.1 KiB)
- ra0 Link encap:Ethernet HWaddr 00:26:75:2A:F7:87
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:24914 errors:0 dropped:0 overruns:0 frame:0
- TX packets:304 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:1000
- RX bytes:6747243 (6.4 MiB) TX bytes:0 (0.0 B)
- Interrupt:4
- # exit
- process '/bin/sh' (pid 1245) exited. Scheduling for restart.
- starting pid 1275, tty '/dev/ttyS1': '/bin/sh'
- BusyBox v1.12.1 (2010-08-16 11:02:59 CST) built-in shell (ash)
- Enter 'help' for a list of built-in commands.
- # quit
- /bin/sh: quit: not found
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement