Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot 2009.08 (Nov 04 2015 - 11:28:55) Avocent (0.0.3) EVB
- CPU: SH-4A
- BOARD: R0P7757LC00xxRL (Cn step) board
- BOOT: Secure, HRK generated
- DRAM: 240MB
- (240MB of 256MB total DRAM is available on U-Boot)
- ENV: Using primary env area.
- In: serial
- Out: serial
- Err: serial
- PCIe: Bridge loaded with 0x18000 bytes
- WDT2: Booted Lower Vector, 'uboot1'
- sh_mmcif: 0, sh-sdhi: 1
- Net: sh_eth.0, sh_g_eth.0
- INFO: 00:002 Start-up -to- util_idrac_main()
- INFO: 00:004 U-Boot 2009.08 (Nov 04 2015 - 11:28:55) Avocent (0.0.3) EVB
- INFO: 00:007 U-Boot checkin date(08-04-2015) Version(1.1.31)
- INFO: 00:006 iDRAC PPID <NULL>
- INFO: 00:003 SPI NOR init 4096 KiB N25Q032 bus=0 cs=0, speed=1000000, mode=3
- INFO: 00:007 SH-4A Product: Major Ver=0x31 Minor Ver=0x13 C3 Little endian
- Family=0x10 Major Ver=0x30 Minor Ver=0x0b
- INFO: 00:139 BCM54610 OUI=0x00d897 Model=0x26 Revision=0x0a PhyAddr=1
- INFO: 00:007 Dedicated monolithic mgmt NIC disabled
- INFO: 00:075 SD CARD: Device: sh-sdhi Manufacturer ID: 9f OEM: 5449
- Name: SD16G Tran Speed: 25000000 Rd Blk Len: 512
- SD ver 2.0 HC: Yes cap(<2gb): 2755657728 cap(>2gb): 0
- ext_rev: 0 rst_n: 0 ext[96]: 0
- INFO: 00:061 EMMC: Device: sh_mmcif Manufacturer ID: 15 OEM: 100
- Name: M4G1E Tran Speed: 25000000 Rd Blk Len: 512
- MMC ver 4.0 HC: Yes cap(<2gb): 0 cap(>2gb): 7815168
- ext_rev: 3 rst_n: 0 ext[96]: 0
- INFO: 00:023 CPLD: Major Ver=0x1 Minor Ver=0x0 Maint Ver=0x4
- Planar: Type=0x09 Rev=0x4 Rework=0x0 Scratch/PathRetry=0x00
- PASS: 00:014 Coin cell detected good, AD=0x367 low water=0x2c1
- PASS: 00:008 PCIe SH7757_C0 Ver=0.15 MCTP en, CRC=0x8e9b6875 @0x8efbd704 cnt=0x18000
- INFO: 00:008 Init PCIe mailbox(PCIe 0xFFEE0150=0x40010000)
- INFO: 00:006 mode=normal
- INFO: 00:002 reset_cause=ac
- PASS: 00:004 Booted Lower Vector, 'uboot1' wdt2cnt=0
- INFO: 00:006 wdt0cnt=0 cpld_recover_cnt=0 ddr_recover_cnt=0
- PASS: 00:007 Clear CH1/CH2, clear 4K shared memory@0xffcaa000 on AC power up
- PASS: 00:007 SMR0 no sermux env, default 0xd4
- INFO: 00:004 GRACR=0x3c HISEL=0x00 SIRQCR5_D=0x03 SIRQCR6_D=0x01 LADMSK0=0xff2
- MRSTCR0=0xfedffe7f MRSTCR1=0xfff3ff0f MRSTCR2=0x6f80feff
- BARMAP=0x1 BCR=0x85000000 NCER=0x01fc NCMCR=0x0006 NCCSR=0x0303
- PASS: 00:021 etherc0=90:B1:1C:27:A4:03
- getherc0=90:B1:1C:27:A4:04
- INFO: 00:010 Fan logic for monolithic planar type 9
- fan1 - def 0000 1fff 3d fan2 - def 0000 1fff 3d
- fan3 - def 0000 1fff 3d fan4 - def 0000 1fff 3d
- fan5 - def 0000 1fff 3d fan6 - def 0000 1fff 3d
- fan7 - def 0000 1fff 3d fan8 - def 0000 1fff 3d
- INFO: 00:076 Env and backup CRC'ed ok
- Erasing SPI flash at 0x100000...Writing to SPI flash...done
- Erasing SPI flash at 0x110000...Writing to SPI flash...done
- *** no text signature found ***
- INFO: 02:590 Sync eMMC/SPI NOR/Alternate u-boot images
- PASS: 00:270 Current u-boot1 1.1.31 verified with 'ubootN'
- Trailer Struct - Missing start token, exp=0xc0de1111 rec=0x0
- U-boot2 in sync with u-boot1 1.1.31
- PASS: 07:455 Verify OS Images N: CRC32 OK: Kernel=0xc4135ec5 Rootfs=0x47eca7d
- PASS: 00:008 Boot device=emmc Boot partition1/N
- Boot Path Retry:P1/N=0 P5/N-1=0
- INFO: 00:000 10:838
- WDT2: Disabled
- Initialization complete, proceed with boot
- OS_WDT0_EN:180 seconds, Re-load ILRAM:
- SPI_WP: Not attempted.
- EMMC_WP: Not attempted.
- Boot Path Retry:P1/N=0 P5/N-1=0
- Copying kernel image ... OK
- ## Booting kernel from Legacy Image at 88000000 ...
- Image Name: sh-linux
- Image Type: SuperH Linux Kernel Image (gzip compressed)
- Data Size: 2625419 Bytes = 2.5 MB
- Load Address: 80001000
- Entry Point: 80002000
- Verifying Checksum ... OK
- Uncompressing Kernel Image ... OK
- WDT2: Disable in do_bootm_linux()
- Monolithic/DRB
- systemd[1]: could not find module by name='autofs4'
- systemd[1]: Failed to insert 'autofs4'
- Welcome to developer console!
- Type "journalctl -b" to view system logs. Type "systemctl reboot" to reboot.
- /home/root #
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
