API tools faq
paste
Advertisement
Guest User

putty_uboot.log

a guest
Mar 12th, 2016
440
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 13.53 KB | None | 0 0
raw download clone embed print report
  1. =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2016.02.23 01:58:57 =~=~=~=~=~=~=~=~=~=~=~=
  2. GXBB:BL1:08dafd:0a8993;FEAT:EDFC318C;POC:3;RCY:0;EMMC:0;READ:0;CHK:0;
  3. TE: 102915
  4. no sdio debug board detected
  5.  
  6. BL2 Built : 15:24:17, Oct 28 2015.
  7. gxb g5d0d038 - xiaobo.gu@droid05
  8.  
  9. Board ID = 1
  10. set vcck to 1100 mv
  11. set vddee to 1000 mv
  12. CPU clk: 1536MHz
  13. DDR channel setting: DDR0 Rank0+1 same
  14. DDR0: 1024MB(auto) @ 912MHz(2T)-13
  15. DataBus test pass!
  16. AddrBus test pass!
  17. Load fip header from eMMC, src: 0x0000c000, des: 0x01400000, size: 0x000000b0
  18. Load bl30 from eMMC, src: 0x00010000, des: 0x01000000, size: 0x00009ef0
  19. Sending bl30........................................OK.
  20. Run bl30...
  21. Load bl301 from eMMC, src: 0x0001c000, des: 0x01000000, size: 0x00001b10
  22. Wait bl30...Done
  23. Sending bl301.......OK.
  24. Run bl301...
  25. Load bl31 from
  26. MMC, src: 0x00020000, des: 0x10100000, size: 0x00011130
  27.  
  28.  
  29.  
  30. --- UART initialized after reboot ---
  31.  
  32. [Reset cause: unknown]
  33.  
  34. [Image: unknown, amlogic_v1.1.3046-00db630 2015-10-28 15:24:31 xiaobo.gu@droid05]
  35.  
  36. bl30: check_permit, count is 1
  37.  
  38.  
  39. bl30: check_permit: ok!
  40.  
  41.  
  42. chipid: ef be aLoad bl33 from eMMC, src: 0x00034000, des: 0x01000000, size: 0x0009dfb0
  43. d de d f0 ad ba ef be ad de not ES chip
  44.  
  45. [0.218623 Inits done]
  46.  
  47. secure task start!
  48. high task start!
  49. low task start!
  50. NOTICE: BL3-1: v1.0(debug):4d2e34d
  51. NOTICE: BL3-1: Built : 17:08:35, Oct 29 2015
  52. INFO: BL3-1: Initializing runtime services
  53. INFO: BL3-1: Preparing for EL3 exit to normal world
  54. INFO: BL3-1: Next image address = 0x1000000
  55. INFO: BL3-1: Next image spsr = 0x3c9
  56.  
  57.  
  58. U-Boot 2015.01-ge90bf25-dirty (Nov 16 2015 - 04:08:49)
  59.  
  60. DRAM: 1 GiB
  61. Relocation Offset is: 36ed5000
  62. register usb cfg[0][1] = 0000000037f627b8
  63. register usb cfg[0][2] = 0000000037f627d8
  64. register usb cfg[2][0] = 0000000037f627f8
  65. vpu detect type: 5
  66. vpu clk_level = 7
  67. set vpu clk: 666667000Hz, readback: 666660000Hz(0x300)
  68. boot_device_flag : 1
  69. Nand PHY Ver:1.01.001.0006 (c) 2013 Amlogic Inc.
  70. init bus_cycle=6, bus_timing=8, system=5.0ns
  71. reset failed
  72. get_chip_type and ret:fffffffe
  73. get_chip_type and ret:fffffffe
  74. chip detect failed and ret:fffffffe
  75. nandphy_init failed and ret=0xfffffff1
  76. MMC: aml_priv->desc_buf = 0x0000000033ec5770
  77. aml_priv->desc_buf = 0x0000000033ec7900
  78. SDIO Port B: 0, SDIO Port C: 1
  79. [mmc_init] mmc init success
  80. mmc read lba=0x14000, blocks=0x400
  81. Amlogic multi-dtb tool
  82. Single dtb detected
  83. start dts,buffer=0000000033ec9d70,dt_addr=0000000033ec9d70
  84. parts: 11
  85. 00: logo0000000002000000 1
  86. 01: recovery0000000002000000 1
  87. 02: rsv0000000000800000 1
  88. 03: tee0000000000800000 1
  89. 04: crypt0000000002000000 1
  90. 05: misc0000000002000000 1
  91. 06: instaboot0000000020000000 1
  92. 07: boot0000000002000000 1
  93. 08: system0000000060000000 1
  94. 09: cache0000000020000000 2
  95. 10: dataffffffffffffffff 4
  96. get_dtb_struct: Get emmc dtb OK!
  97. [mmc_get_partition_table] skip cache partition.
  98. Partition table get from SPL is :
  99. name offset size flag
  100. ===================================================================================
  101. 0: bootloader 0 400000 0
  102. 1: reserved 2400000 4000000 0
  103. 2: cache 6c00000 20000000 2
  104. 3: env 27400000 800000 0
  105. 4: logo 28400000 2000000 1
  106. 5: recovery 2ac00000 2000000 1
  107. 6: rsv 2d400000 800000 1
  108. 7: tee 2e400000 800000 1
  109. 8: crypt 2f400000 2000000 1
  110. 9: misc 31c00000 2000000 1
  111. 10: instaboot 34400000 20000000 1
  112. 11: boot 54c00000 2000000 1
  113. 12: system 57400000 60000000 1
  114. 13: data b7c00000 11a400000 4
  115. mmc read lba=0x12000, blocks=0x1
  116. mmc read lba=0x12001, blocks=0x1
  117. mmc_read_partition_tbl: mmc read partition OK!
  118. eMMC/TSD partition table have been checked OK!
  119. mmc env offset: 0x27400000
  120. In: serial
  121. Out: serial
  122. Err: serial
  123. [store]To run cmd[emmc dtb_read 0x1000000 0x40000]
  124. read emmc dtb
  125. Amlogic multi-dtb tool
  126. Single dtb detected
  127. Net: Meson_Ethernet
  128. wipe_data=successful
  129. wipe_cache=successful
  130. upgrade_step=2
  131. reboot_mode=cold_boot
  132. hpd_state=0
  133. [CANVAS]addr=0x3f800000 width=3840, height=2160
  134.  
  135. Not find '576cvbs' mapped VIC
  136. amlkey_init() enter!
  137. [EFUSE_MSG]keynum is 4
  138. [KM]Error:f[key_manage_query_size]L504:key[usid] not programed yet
  139. [KM]Error:f[key_manage_query_size]L504:key[deviceid] not programed yet
  140. gpio: pin GPIOAO_3 (gpio 122) value is 1
  141. Enter USB burn
  142. Try connect time out 701, 700, 585
  143. Hit any key to stop autoboot: 1 0
  144. gxb_p200_v1#
  145.  
  146. gxb_p200_v1#
  147.  
  148. gxb_p200_v1#
  149.  
  150. gxb_p200_v1#
  151.  
  152. gxb_p200_v1#
  153.  
  154. gxb_p200_v1#
  155.  
  156. gxb_p200_v1#
  157.  
  158. gxb_p200_v1#printe printenv
  159.  
  160. baudrate=115200
  161. bootargs=rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.mem_address=0x20000000 ramoops.mem_size=0x100000 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=permissive logo=osd1,loaded,0x3f800000,576cvbs hdmimode=1080p60hz cvbsmode=576cvbs hdmitx= androidboot.firstboot=0 mac=20:18:0e:02:57:d0 androidboot.mac=20:18:0e:02:57:d0
  162. bootcmd=run storeboot
  163. bootdelay=1
  164. bootmode_check=get_rebootmode; echo reboot_mode=${reboot_mode};if test ${reboot_mode} = factory_reset; then defenv_reserv aml_dt;setenv upgrade_step 2; save;fi;
  165. bootup_offset=0x1080300
  166. bootup_size=0x3f4c8
  167. cmdline_keys=if keyman init 0x1234; then if keyman read usid ${loadaddr} str; then setenv bootargs ${bootargs} androidboot.serialno=${usid};fi;if keyman read mac ${loadaddr} str; then setenv bootargs ${bootargs} mac=${mac} androidboot.mac=${mac};fi;if keyman read deviceid ${loadaddr} str; then setenv bootargs ${bootargs} androidboot.deviceid=${deviceid};fi;fi;
  168. cvbsmode=576cvbs
  169. display_bpp=16
  170. display_color_bg=0
  171. display_color_fg=0xffff
  172. display_color_index=16
  173. display_height=576
  174. display_layer=osd1
  175. display_width=720
  176. dtb_mem_addr=0x1000000
  177. edid.crcvalue=0xa6b90000
  178. ethact=Meson_Ethernet
  179. ethaddr=00:15:18:01:81:31
  180. factory_reset_poweroff_protect=echo wipe_data=${wipe_data}; echo wipe_cache=${wipe_cache};if test ${wipe_data} = failed; then run init_display; run storeargs;if mmcinfo; then run recovery_from_sdcard;fi;if usb start 0; then run recovery_from_udisk;fi;run recovery_from_flash;fi; if test ${wipe_cache} = failed; then run init_display; run storeargs;if mmcinfo; then run recovery_from_sdcard;fi;if usb start 0; then run recovery_from_udisk;fi;run recovery_from_flash;fi;
  181. fb_addr=0x3f800000
  182. fb_height=1080
  183. fb_width=1920
  184. fdt_high=0x20000000
  185. firstboot=0
  186. gatewayip=10.18.9.1
  187. hdmimode=1080p60hz
  188. hostname=arm_gxbb
  189. identifyWaitTime=1500
  190. init_display=hdmitx hpd;osd open;osd clear;vout output ${outputmode};imgread pic logo bootup $loadaddr;bmp display $bootup_offset;bmp scale
  191. initargs=rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.mem_address=0x20000000 ramoops.mem_size=0x100000 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=permissive
  192. ipaddr=10.18.9.97
  193. irremote_update=if irkey 0xe31cfb04 0xb748fb04 2500000; then echo read irkey ok!; if itest ${irkey_value} == 0xe31cfb04; then run update;else if itest ${irkey_value} == 0xb748fb04; then run update;\
  194. fi;fi;fi;
  195. is.bestmode=false
  196. loadaddr=1080000
  197. mac=20:18:0e:02:57:d0
  198. netmask=255.255.255.0
  199. outputmode=576cvbs
  200. preboot=run factory_reset_poweroff_protect;run upgrade_check;run bootmode_check;run init_display;run storeargs;run upgrade_key;run switch_bootmode;
  201. reboot_mode=cold_boot
  202. recovery_from_flash=if imgread kernel recovery ${loadaddr}; then bootm ${loadaddr}; fi
  203. recovery_from_sdcard=if fatload mmc 0 ${loadaddr} aml_autoscript; then autoscr ${loadaddr}; fi;if fatload mmc 0 ${loadaddr} recovery.img; then if fatload mmc 0 ${dtb_mem_addr} dtb.img; then echo sd dtb.img loaded; fi;bootm ${loadaddr};fi;
  204. recovery_from_udisk=if fatload usb 0 ${loadaddr} aml_autoscript; then autoscr ${loadaddr}; fi;if fatload usb 0 ${loadaddr} recovery.img; then if fatload usb 0 ${dtb_mem_addr} dtb.img; then echo udisk dtb.img loaded; fi;bootm ${loadaddr};fi;
  205. sdc_burning=sdc_burn ${sdcburncfg}
  206. sdcburncfg=aml_sdc_burn.ini
  207. serverip=10.18.9.113
  208. stderr=serial
  209. stdin=serial
  210. stdout=serial
  211. storeargs=setenv bootargs ${initargs} logo=${display_layer},loaded,${fb_addr},${outputmode} hdmimode=${hdmimode} cvbsmode=${cvbsmode} hdmitx=${cecconfig} androidboot.firstboot=${firstboot}; run cmdline_keys;
  212. storeboot=if imgread kernel boot ${loadaddr}; then store dtb read $dtb_mem_addr; bootm ${loadaddr}; fi;run update;
  213. switch_bootmode=get_rebootmode;if test ${reboot_mode} = factory_reset; then run recovery_from_flash;else if test ${reboot_mode} = update; then run update;else if test ${reboot_mode} = cold_boot; then run try_auto_burn; fi;fi;fi;
  214. try_auto_burn=update 700 1500;
  215. update=run usb_burning; run sdc_burning; if mmcinfo; then run recovery_from_sdcard;fi;if usb start 0; then run recovery_from_udisk;fi;run recovery_from_flash;
  216. upgrade_check=echo upgrade_step=${upgrade_step}; if itest ${upgrade_step} == 3; then run init_display; run storeargs; run update;else if itest ${upgrade_step} == 1; then defenv_reserv; setenv upgrade_step 2; saveenv;fi;fi;
  217. upgrade_key=if gpio input GPIOAO_3; then echo detect upgrade key; run update;fi;
  218. upgrade_step=2
  219. usb_burning=update 1000
  220. wipe_cache=successful
  221. wipe_data=successful
  222.  
  223. Environment size: 4739/65532 bytes
  224. gxb_p200_v1#help
  225.  
  226. ? - alias for 'help'
  227. aml_sysrecovery- Burning with amlogic format package from partition sysrecovery
  228. amlmmc - AMLMMC sub system
  229. amlnf - aml nand sub-system
  230. amlnf_test- AMLPHYNAND sub-system
  231. autoping- do auto ping test
  232. autoscr - run script from memory
  233. base - print or set address offset
  234. bmp - manipulate BMP image data
  235. booti - boot arm64 Linux Image image from memory
  236. bootm - boot application image from memory
  237. bootp - boot image via network using BOOTP/TFTP protocol
  238. cbusreg - cbus register read/write
  239. clkmsr - measure PLL clock
  240. cmp - memory compare
  241. cp - memory copy
  242. crc32 - checksum calculation
  243. cvbs - CVBS sub-system
  244. dcache - enable or disable data cache
  245. defenv_reserv- reserve some specified envs after defaulting env
  246. dhcp - boot image via network using DHCP/TFTP protocol
  247. echo - echo args to console
  248. efuse - efuse read/write data commands
  249. efuse_user- efuse user space read write ops
  250. emmc - EMMC sub system
  251. env - environment handling commands
  252. ethchk - check ethernet status
  253. ethdbg - set ethernet debug level
  254. ethmode - set ethernet mac mode
  255. ethrst - reset ethernet phy
  256. exit - exit script
  257. false - do nothing, unsuccessfully
  258. fatinfo - print information about filesystem
  259. fatload - load binary file from a dos filesystem
  260. fatls - list files in a directory (default /)
  261. fatsize - determine a file's size
  262. fdt - flattened device tree utility commands
  263. get_rebootmode- get reboot mode
  264. go - start application at address 'addr'
  265. gpio - query and control gpio pins
  266. hdmitx - HDMITX sub-system
  267. help - print command description/usage
  268. i2c - I2C sub-system
  269. icache - enable or disable instruction cache
  270. imgread - Read the image from internal flash with actual size
  271. irkey - irkey key_value1 key_value2 time_value
  272. itest - return true/false on integer compare
  273. jtagoff - disable jtag
  274. jtagon - enable jtag
  275. keyman - Unify key ops interfaces based dts cfg
  276. keyunify- key unify sub-system
  277. loop - infinite loop on address range
  278. macreg - ethernet mac register read/write/dump
  279. md - memory display
  280. mdc_clk - do mdc clock
  281. mm - memory modify (auto-incrementing address)
  282. mmc - MMC sub system
  283. mmcinfo - display MMC info
  284. mw - memory write (fill)
  285. netspd_f- enforce eth speed
  286. nm - memory modify (constant address)
  287. open_scp_log- print SCP messgage
  288. osd - osd sub-system
  289. phyreg - ethernet phy register read/write/dump
  290. ping - send ICMP ECHO_REQUEST to network host
  291. printenv- print environment variables
  292. rarpboot- boot image via network using RARP/TFTP protocol
  293. read_temp- cpu temp-system
  294. reboot - set reboot mode and reboot system
  295. reset - Perform RESET of the CPU
  296. run - run commands in an environment variable
  297. saveenv - save environment variables to persistent storage
  298. sdc_burn- Burning with amlogic format package in sdmmc
  299. sdc_update- Burning a partition with image file in sdmmc card
  300. set_trim_base- cpu temp-system
  301. set_usb_boot- set usb boot mode
  302. setenv - set environment variables
  303. showvar - print local hushshell variables
  304. sleep - delay execution for some time
  305. store - STORE sub-system
  306. temp_triming- cpu temp-system
  307. test - minimal test like /bin/sh
  308. tftpboot- boot image via network using TFTP protocol
  309. true - do nothing, successfully
  310. unpackimg- un pack logo image into pictures
  311. update - Enter v2 usbburning mode
  312. usb - USB sub-system
  313. usb_burn- Burning with amlogic format package in usb
  314. usb_update- Burning a partition with image file in usb host
  315. usbboot - boot from USB device
  316. version - print monitor, compiler and linker version
  317. vout - VOUT sub-system
  318. vpu - vpu sub-system
  319. wipeisb - wipeisb
  320. write_trim- cpu temp-system
  321. write_version- cpu temp-system
  322. gxb_p200_v1#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!