API tools faq
paste
Guest User

BBB Flasher Output

a guest
Nov 12th, 2014
251
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 26.82 KB | None | 0 0
raw download clone embed print report
  1. CCCCCCCC
  2. U-Boot SPL 2014.10-00019-gbfd789c (Oct 15 2014 - 11:56:05)
  3.  
  4.  
  5. U-Boot 2014.10-00019-gbfd789c (Oct 15 2014 - 11:56:05), Build: jenkins-github_Bootloader-Builder-43
  6.  
  7. Watchdog enabled
  8. I2C: ready
  9. DRAM: 512 MiB
  10. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
  11. Using default environment
  12.  
  13. Net: <ethaddr> not set. Validating first E-fuse MAC
  14. cpsw, usb_ether
  15. Hit any key to stop autoboot: 0
  16. gpio: pin 53 (gpio 53) value is 1
  17. switch to partitions #0, OK
  18. mmc0 is current device
  19. gpio: pin 54 (gpio 54) value is 1
  20. Checking for: /uEnv.txt ...
  21. reading uEnv.txt
  22. 760 bytes read in 5 ms (148.4 KiB/s)
  23. gpio: pin 55 (gpio 55) value is 1
  24. Loaded environment from uEnv.txt
  25. Importing environment from mmc ...
  26. Checking if uenvcmd is set ...
  27. gpio: pin 56 (gpio 56) value is 1
  28. Running uenvcmd ...
  29. 721 bytes read in 45 ms (15.6 KiB/s)
  30. 5605472 bytes read in 342 ms (15.6 MiB/s)
  31. 2868877 bytes read in 194 ms (14.1 MiB/s)
  32. 26098 bytes read in 70 ms (363.3 KiB/s)
  33. Kernel image @ 0x82000000 [ 0x000000 - 0x558860 ]
  34. ## Flattened Device Tree blob at 88000000
  35. Booting using the fdt blob at 0x88000000
  36. Loading Ramdisk to 8fd43000, end 8ffff68d ... OK
  37. Loading Device Tree to 8fd39000, end 8fd425f1 ... OK
  38.  
  39. Starting kernel ...
  40.  
  41. Uncompressing Linux... done, booting the kernel.
  42. [ 0.000000] Booting Linux on physical CPU 0x0
  43. [ 0.000000] Initializing cgroup subsys cpu
  44. [ 0.000000] Linux version 3.8.13-bone67 (root@a5-imx6q-wandboard-2gb) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Wed Sep 24 21:30:03 UTC 2014
  45. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
  46. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  47. [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
  48. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  49. [ 0.000000] AM335X ES2.1 (l2cache sgx neon )
  50. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c0d3f000 s14080 r8192 d14592 u36864
  51. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792
  52. [ 0.000000] Kernel command line: console=tty0 console=ttyO0,115200n8 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait fixrtc init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh
  53. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  54. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  55. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  56. [ 0.000000] __ex_table already sorted, skipping sort
  57. [ 0.000000] allocated 1048576 bytes of page_cgroup
  58. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  59. [ 0.000000] Memory: 511MB = 511MB total
  60. [ 0.000000] Memory: 505404k/505404k available, 18884k reserved, 0K highmem
  61. [ 0.000000] Virtual kernel memory layout:
  62. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  63. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  64. [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  65. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  66. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  67. [ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
  68. [ 0.000000] .text : 0xc0008000 - 0xc07ee910 (8091 kB)
  69. [ 0.000000] .init : 0xc07ef000 - 0xc082c700 ( 246 kB)
  70. [ 0.000000] .data : 0xc082e000 - 0xc08b5740 ( 542 kB)
  71. [ 0.000000] .bss : 0xc08b5740 - 0xc092ef00 ( 486 kB)
  72. [ 0.000000] Hierarchical RCU implementation.
  73. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
  74. [ 0.000000] NR_IRQS:0 nr_irqs:0 0
  75. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
  76. [ 0.000000] Total of 128 interrupts on 1 active controller
  77. [ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
  78. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  79. [ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
  80. [ 0.000000] Console: colour dummy device 80x30
  81. [ 0.000000] console [tty0] enabled
  82. [ 0.000642] Calibrating delay loop... 993.47 BogoMIPS (lpj=969728)
  83. [ 0.029197] pid_max: default: 32768 minimum: 301
  84. [ 0.029342] Security Framework initialized
  85. [ 0.029406] Mount-cache hash table entries: 512
  86. [ 0.035120] Initializing cgroup subsys cpuacct
  87. [ 0.035163] Initializing cgroup subsys memory
  88. [ 0.035213] Initializing cgroup subsys blkio
  89. [ 0.035307] CPU: Testing write buffer coherency: ok
  90. [ 0.035712] CPU0: thread -1, cpu 0, socket -1, mpidr 0
  91. [ 0.035780] Setting up static identity map for 0x804d3708 - 0x804d3754
  92. [ 0.036718] Brought up 1 CPUs
  93. [ 0.036746] SMP: Total of 1 processors activated (993.47 BogoMIPS).
  94. [ 0.037547] devtmpfs: initialized
  95. [ 0.045925] omap_hwmod: wd_timer2: _wait_target_disable failed
  96. [ 0.098083] pinctrl core: initialized pinctrl subsystem
  97. [ 0.098237] rstctl core: initialized rstctl subsystem
  98. [ 0.098527] regulator-dummy: no parameters
  99. [ 0.098860] NET: Registered protocol family 16
  100. [ 0.099401] DMA: preallocated 256 KiB pool for atomic coherent allocations
  101. [ 0.105017] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
  102. [ 0.105650] platform 49000000.edma: alias fck already exists
  103. [ 0.105682] platform 49000000.edma: alias fck already exists
  104. [ 0.105704] platform 49000000.edma: alias fck already exists
  105. [ 0.106422] OMAP GPIO hardware version 0.1
  106. [ 0.108956] gpio-rctrl rstctl.4: loaded OK
  107. [ 0.112313] No ATAGs?
  108. [ 0.112337] hw-breakpoint: debug architecture 0x4 unsupported.
  109. [ 0.113656] cpsw.0: No hwaddr in dt. Using 7c:66:9d:58:f4:1b from efuse
  110. [ 0.113698] cpsw.1: No hwaddr in dt. Using 7c:66:9d:58:f4:1d from efuse
  111. [ 0.121832] bio: create slab <bio-0> at 0
  112. [ 0.128150] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
  113. [ 0.128450] vmmcsd_fixed: 3300 mV
  114. [ 0.130045] SCSI subsystem initialized
  115. [ 0.130300] usbcore: registered new interface driver usbfs
  116. [ 0.130370] usbcore: registered new interface driver hub
  117. [ 0.130579] usbcore: registered new device driver usb
  118. [ 0.131850] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
  119. [ 0.132849] input: tps65217_pwr_but as /devices/ocp.3/44e0b000.i2c/i2c-0/0-0024/input/input0
  120. [ 0.134448] DCDC1: at 1350 mV
  121. [ 0.135333] vdd_mpu: 925 <--> 1325 mV at 1325 mV
  122. [ 0.136151] vdd_core: 925 <--> 1150 mV at 1125 mV
  123. [ 0.137014] LDO1: at 1800 mV
  124. [ 0.137817] LDO2: at 3300 mV
  125. [ 0.139310] LDO3: 1800 mV
  126. [ 0.140125] LDO4: at 3300 mV
  127. [ 0.140867] tps65217 0-0024: TPS65217 ID 0xe version 1.2
  128. [ 0.141348] omap_i2c 44e0b000.i2c: unable to select pin group
  129. [ 0.141823] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
  130. [ 0.143287] omap_i2c 4819c000.i2c: unable to select pin group
  131. [ 0.143451] media: Linux media interface: v0.10
  132. [ 0.143521] Linux video capture interface: v2.00
  133. [ 0.143598] pps_core: LinuxPPS API ver. 1 registered
  134. [ 0.143614] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  135. [ 0.144018] Advanced Linux Sound Architecture Driver Initialized.
  136. [ 0.144715] NetLabel: Initializing
  137. [ 0.144739] NetLabel: domain hash size = 128
  138. [ 0.144752] NetLabel: protocols = UNLABELED CIPSOv4
  139. [ 0.144824] NetLabel: unlabeled traffic allowed by default
  140. [ 0.145010] Switching to clocksource gp_timer
  141. [ 0.176575] NET: Registered protocol family 2
  142. [ 0.177241] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  143. [ 0.177336] TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
  144. [ 0.177426] TCP: Hash tables configured (established 4096 bind 4096)
  145. [ 0.177500] TCP: reno registered
  146. [ 0.177520] UDP hash table entries: 256 (order: 1, 12288 bytes)
  147. [ 0.177551] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
  148. [ 0.177791] NET: Registered protocol family 1
  149. [ 0.178195] RPC: Registered named UNIX socket transport module.
  150. [ 0.178222] RPC: Registered udp transport module.
  151. [ 0.178236] RPC: Registered tcp transport module.
  152. [ 0.178250] RPC: Registered tcp NFSv4.1 backchannel transport module.
  153. [ 0.178535] Trying to unpack rootfs image as initramfs...
  154. [ 0.373321] Freeing initrd memory: 2800K
  155. [ 0.373714] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  156. [ 0.374002] CPU PMU: attempt to register multiple PMU devices!
  157. [ 0.374032] arm-pmu: probe of arm-pmu failed with error -28
  158. [ 0.374353] omap2_mbox_probe: platform not supported
  159. [ 0.524637] VFS: Disk quotas dquot_6.5.2
  160. [ 0.524804] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  161. [ 0.525525] NFS: Registering the id_resolver key type
  162. [ 0.525612] Key type id_resolver registered
  163. [ 0.525627] Key type id_legacy registered
  164. [ 0.525902] fuse init (API version 7.20)
  165. [ 0.526405] Btrfs loaded
  166. [ 0.526521] msgmni has been set to 992
  167. [ 0.528245] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  168. [ 0.528286] io scheduler noop registered
  169. [ 0.528300] io scheduler deadline registered
  170. [ 0.528328] io scheduler cfq registered (default)
  171. [ 0.529463] tps65217-bl tps65217-bl: no platform data provided
  172. [ 0.529503] tps65217-bl: probe of tps65217-bl failed with error -22
  173. [ 0.530092] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  174. [ 0.531390] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
  175. [ 0.531694] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 72) is a OMAP UART0
  176. [ 1.289466] console [ttyO0] enabled
  177. [ 1.293834] [drm] Initialized drm 1.1.0 20060810
  178. [ 1.305994] brd: module loaded
  179. [ 1.312919] loop: module loaded
  180. [ 1.316334] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  181. [ 1.323580] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  182. [ 1.330819] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  183. [ 1.338060] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  184. [ 1.345287] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  185. [ 1.359184] bone-capemgr bone_capemgr.9: Baseboard: 'A335BNLT,000C,2314BBBK0158'
  186. [ 1.366965] bone-capemgr bone_capemgr.9: compatible-baseboard=ti,beaglebone-black
  187. [ 1.404860] bone-capemgr bone_capemgr.9: slot #0: No cape found
  188. [ 1.441965] bone-capemgr bone_capemgr.9: slot #1: No cape found
  189. [ 1.479075] bone-capemgr bone_capemgr.9: slot #2: No cape found
  190. [ 1.516184] bone-capemgr bone_capemgr.9: slot #3: No cape found
  191. [ 1.522434] bone-capemgr bone_capemgr.9: slot #4: specific override
  192. [ 1.529037] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 4
  193. [ 1.537056] bone-capemgr bone_capemgr.9: slot #4: 'Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-EMMC-2G'
  194. [ 1.547128] bone-capemgr bone_capemgr.9: slot #5: specific override
  195. [ 1.553697] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 5
  196. [ 1.561721] bone-capemgr bone_capemgr.9: slot #5: 'Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI'
  197. [ 1.571700] bone-capemgr bone_capemgr.9: slot #6: specific override
  198. [ 1.578296] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 6
  199. [ 1.586346] bone-capemgr bone_capemgr.9: slot #6: 'Bone-Black-HDMIN,00A0,Texas Instrument,BB-BONELT-HDMIN'
  200. [ 1.596789] bone-capemgr bone_capemgr.9: loader: before slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
  201. [ 1.605636] bone-capemgr bone_capemgr.9: loader: check slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
  202. [ 1.614455] bone-capemgr bone_capemgr.9: loader: before slot-5 BB-BONELT-HDMI:00A0 (prio 1)
  203. [ 1.623194] bone-capemgr bone_capemgr.9: loader: check slot-5 BB-BONELT-HDMI:00A0 (prio 1)
  204. [ 1.631859] bone-capemgr bone_capemgr.9: initialized OK.
  205. [ 1.637437] bone-capemgr bone_capemgr.9: loader: before slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
  206. [ 1.646274] bone-capemgr bone_capemgr.9: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
  207. [ 1.656433] OneNAND driver initializing
  208. [ 1.661398] usbcore: registered new interface driver cdc_ether
  209. [ 1.667540] bone-capemgr bone_capemgr.9: loader: after slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
  210. [ 1.676357] usbcore: registered new interface driver rndis_host
  211. [ 1.682606] bone-capemgr bone_capemgr.9: loader: after slot-5 BB-BONELT-HDMI:00A0 (prio 1)
  212. [ 1.691278] bone-capemgr bone_capemgr.9: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
  213. [ 1.700095] usbcore: registered new interface driver cdc_ncm
  214. [ 1.706048] bone-capemgr bone_capemgr.9: slot #4: Requesting firmware 'cape-bone-2g-emmc1.dtbo' for board-name 'Bone-LT-eMMC-2G', version '00A0'
  215. [ 1.720083] usbcore: registered new interface driver cdc_acm
  216. [ 1.726035] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  217. [ 1.734405] Initializing USB Mass Storage driver...
  218. [ 1.739534] bone-capemgr bone_capemgr.9: slot #4: dtbo 'cape-bone-2g-emmc1.dtbo' loaded; converting to live tree
  219. [ 1.750204] bone-capemgr bone_capemgr.9: slot #5: Requesting firmware 'cape-boneblack-hdmi-00A0.dtbo' for board-name 'Bone-Black-HDMI', version '00A0'
  220. [ 1.764365] usbcore: registered new interface driver usb-storage
  221. [ 1.770656] USB Mass Storage support registered.
  222. [ 1.775687] bone-capemgr bone_capemgr.9: slot #4: #2 overlays
  223. [ 1.782309] bone-capemgr bone_capemgr.9: slot #4: Applied #2 overlays.
  224. [ 1.789219] bone-capemgr bone_capemgr.9: loader: done slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
  225. [ 1.797937] bone-capemgr bone_capemgr.9: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
  226. [ 1.806741] bone-capemgr bone_capemgr.9: slot #5: dtbo 'cape-boneblack-hdmi-00A0.dtbo' loaded; converting to live tree
  227. [ 1.818126] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
  228. [ 1.824695] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
  229. [ 1.829928] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:480 dsps_musb_init: OK
  230. [ 1.839209] bone-capemgr bone_capemgr.9: slot #5: #4 overlays
  231. [ 1.846720] platform 4830e000.fb: alias fck already exists
  232. [ 1.852713] musb-hdrc musb-hdrc.0.auto: *** mode=3
  233. [ 1.857770] musb-hdrc musb-hdrc.0.auto: *** power=250
  234. [ 1.864114] bone-capemgr bone_capemgr.9: slot #5: Applied #4 overlays.
  235. [ 1.870994] bone-capemgr bone_capemgr.9: loader: done slot-5 BB-BONELT-HDMI:00A0 (prio 1)
  236. [ 1.879576] bone-capemgr bone_capemgr.9: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
  237. [ 1.888763] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
  238. [ 1.893997] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:480 dsps_musb_init: OK
  239. [ 1.902749] bone-capemgr bone_capemgr.9: loader: after slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
  240. [ 1.911695] musb-hdrc musb-hdrc.1.auto: *** mode=1
  241. [ 1.916739] musb-hdrc musb-hdrc.1.auto: *** power=250
  242. [ 1.922030] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
  243. [ 1.928081] bone-capemgr bone_capemgr.9: slot #6: Requesting firmware 'cape-boneblack-hdmin-00A0.dtbo' for board-name 'Bone-Black-HDMIN', version '00A0'
  244. [ 1.942584] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
  245. [ 1.950939] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  246. [ 1.958071] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  247. [ 1.965639] usb usb1: Product: MUSB HDRC host driver
  248. [ 1.970842] usb usb1: Manufacturer: Linux 3.8.13-bone67 musb-hcd
  249. [ 1.977128] usb usb1: SerialNumber: musb-hdrc.1.auto
  250. [ 1.982375] bone-capemgr bone_capemgr.9: slot #6: dtbo 'cape-boneblack-hdmin-00A0.dtbo' loaded; converting to live tree
  251. [ 1.993869] bone-capemgr bone_capemgr.9: slot #6: BB-BONELT-HDMIN conflict P8.45 (#5:BB-BONELT-HDMI)
  252. [ 2.003469] bone-capemgr bone_capemgr.9: slot #6: Failed verification
  253. [ 2.010220] bone-capemgr bone_capemgr.9: loader: failed to load slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
  254. [ 2.020644] hub 1-0:1.0: USB hub found
  255. [ 2.024647] hub 1-0:1.0: 1 port detected
  256. [ 2.029662] mousedev: PS/2 mouse device common for all mice
  257. [ 2.037047] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
  258. [ 2.044743] i2c /dev entries driver
  259. [ 2.049495] pps_ldisc: PPS line discipline registered
  260. [ 2.054896] Driver for 1-wire Dallas network protocol.
  261. [ 2.061434] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
  262. [ 2.069085] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: [email protected]
  263. [ 2.077969] cpuidle: using governor ladder
  264. [ 2.082299] cpuidle: using governor menu
  265. [ 2.086728] omap_hsmmc mmc.5: of_parse_phandle_with_args of 'reset' failed
  266. [ 2.093933] omap_hsmmc mmc.5: Failed to get rstctl; not using any
  267. [ 2.100607] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
  268. [ 2.107778] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
  269. [ 2.115048] mmc.5 supply vmmc_aux not found, using dummy regulator
  270. [ 2.121876] omap_hsmmc mmc.5: pins are not configured from the driver
  271. [ 2.155079] gpio-rctrl rstctl.4: gpio_rctrl_request eMMC_RSTn
  272. [ 2.161230] omap_hsmmc mmc.11: Got rstctl (gpio:#0 name eMMC_RSTn) label:eMMC_RSTn
  273. [ 2.169200] gpio-rctrl rstctl.4: gpio_rctrl_deassert eMMC_RSTn
  274. [ 2.175532] edma-dma-engine edma-dma-engine.0: allocated channel for 0:3
  275. [ 2.182628] edma-dma-engine edma-dma-engine.0: allocated channel for 0:2
  276. [ 2.190033] mmc.11 supply vmmc_aux not found, using dummy regulator
  277. [ 2.196684] omap_hsmmc mmc.11: pins are not configured from the driver
  278. [ 2.231319] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.8
  279. [ 2.243018] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status -22
  280. [ 2.250306] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
  281. [ 2.259244] leds-gpio gpio-leds.8: pins are not configured from the driver
  282. [ 2.267205] ledtrig-cpu: registered to indicate activity on CPUs
  283. [ 2.273789] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
  284. [ 2.281014] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
  285. [ 2.288489] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
  286. [ 2.294740] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
  287. [ 2.301899] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
  288. [ 2.311890] usbcore: registered new interface driver usbhid
  289. [ 2.317802] usbhid: USB HID core driver
  290. [ 2.321877] mmc0: host does not support reading read-only switch. assuming write-enable.
  291. [ 2.331226] ashmem: initialized
  292. [ 2.334700] mmc0: new high speed SDHC card at address 59b4
  293. [ 2.340710] logger: created 256K log 'log_main'
  294. [ 2.345939] mmcblk0: mmc0:59b4 USDU1 14.7 GiB
  295. [ 2.350872] logger: created 256K log 'log_events'
  296. [ 2.356630] logger: created 256K log 'log_radio'
  297. [ 2.361621] mmcblk0: p1 p2
  298. [ 2.365033] logger: created 256K log 'log_system'
  299. [ 2.373280] davinci_evm sound.14: nxp-hdmi-hifi <-> 48038000.mcasp mapping ok
  300. [ 2.382948] TCP: cubic registered
  301. [ 2.386584] NET: Registered protocol family 10
  302. [ 2.392165] NET: Registered protocol family 17
  303. [ 2.397197] Key type dns_resolver registered
  304. [ 2.401887] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  305. [ 2.410002] ThumbEE CPU extension supported.
  306. [ 2.414520] Registering SWP/SWPB emulation handler
  307. [ 2.420228] registered taskstats version 1
  308. [ 2.426152] tilcdc 4830e000.fb: No power control GPIO
  309. [ 2.545950] tilcdc 4830e000.fb: found TDA19988
  310. [ 2.551288] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  311. [ 2.558220] [drm] No driver support for vblank timestamp query.
  312. [ 2.564743] tilcdc 4830e000.fb: No connectors reported connected with modes
  313. [ 2.572090] [drm] Cannot find any crtc or sizes - going 1024x768
  314. [ 2.587666] Console: switching to colour frame buffer device 128x48
  315. [ 2.600417] tilcdc 4830e000.fb: fb0: frame buffer device
  316. [ 2.606162] tilcdc 4830e000.fb: registered panic notifier
  317. [ 2.611937] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
  318. [ 2.632383] mmc1: BKOPS_EN bit is not set
  319. [ 2.640517] mmc1: new high speed MMC card at address 0001
  320. [ 2.646760] mmcblk1: mmc1:0001 MMC04G 3.60 GiB
  321. [ 2.651822] mmcblk1boot0: mmc1:0001 MMC04G partition 1 2.00 MiB
  322. [ 2.658328] mmcblk1boot1: mmc1:0001 MMC04G partition 2 2.00 MiB
  323. [ 2.665657] mmcblk1: p1 p2
  324. [ 2.670281] mmcblk1boot1: unknown partition table
  325. [ 2.675446] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
  326. [ 2.681918] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
  327. [ 2.690062] mmcblk1boot0: unknown partition table
  328. [ 2.704247] libphy: 4a101000.mdio: probed
  329. [ 2.710970] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
  330. [ 2.723243] Detected MACID = 7c:66:9d:58:f4:1b
  331. [ 2.727919] cpsw 4a100000.ethernet: NAPI disabled
  332. [ 2.739039] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801)
  333. [ 2.755346] ALSA device list:
  334. [ 2.761040] #0: TI BeagleBone Black
  335. [ 2.767943] Freeing init memory: 244K
  336. Loading, please wait...
  337. [ 2.844737] udevd[99]: starting version 175
  338. Begin: Loading essential drivers ... done.
  339. Begin: Running /scripts/init-premount ... done.
  340. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  341. Begin: Running /scripts/local-premount ... done.
  342. [ 4.091775] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  343. Begin: Running /scripts/local-bottom ... done.
  344. done.
  345. Begin: Running /scripts/init-bottom ... done.
  346. Valid EEPROM header found
  347. -----------------------------
  348. debug copying: [/dev/mmcblk0] -> [/dev/mmcblk1]
  349. NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
  350. mmcblk1boot0 179:16 0 2M 1 disk
  351. mmcblk1boot1 179:24 0 2M 1 disk
  352. mmcblk0 179:0 0 14.7G 0 disk
  353. |-mmcblk0p1 179:1 0 96M 0 part /boot/uboot
  354. `-mmcblk0p2 179:2 0 3.5G 0 part /
  355. mmcblk1 179:8 0 3.6G 0 disk
  356. |-mmcblk1p1 179:9 0 96M 0 part
  357. `-mmcblk1p2 179:10 0 3.5G 0 part
  358. -----------------------------
  359. Erasing: /dev/mmcblk1
  360. 108+0 records in
  361. 108+0 records out
  362. 113246208 bytes (113 MB) copied, 11.8405 s, 9.6 MB/s
  363. 108+0 records in
  364. 108+0 records out
  365. 113246208 bytes (113 MB) copied, 3.59229 s, 31.5 MB/s
  366.  
  367. Using dd to place bootloader on [/dev/mmcblk1]
  368. -----------------------------
  369. dd if=/opt/backup/uboot/MLO of=/dev/mmcblk1 count=1 seek=1 conv=notrunc bs=128k
  370. -----------------------------
  371. 0+1 records in
  372. 0+1 records out
  373. 70732 bytes (71 kB) copied, 0.0150137 s, 4.7 MB/s
  374. -----------------------------
  375. dd if=/opt/backup/uboot/u-boot.img of=/dev/mmcblk1 count=2 seek=1 conv=notrunc bs=384k
  376. -----------------------------
  377. 0+1 records in
  378. 0+1 records out
  379. 375372 bytes (375 kB) copied, 0.0571357 s, 6.6 MB/s
  380. Formatting: /dev/mmcblk1
  381. Checking that no[ 20.440917] mmcblk1: unknown partition table
  382. -one is using this disk right now ...
  383. OK
  384.  
  385. Dis[ 20.451158] mmcblk1: p1 p2
  386. k /dev/mmcblk1: 118016 cylinders, 4 heads, 16 sectors/track
  387.  
  388. sfdisk: ERROR: sector 3069653513 does not have an msdos signature
  389. /dev/mmcblk1: unrecognized partition table type
  390. Old situation:
  391. No partitions found
  392. New situation:
  393. Units = mebibytes of 1048576 bytes, blocks of 1024 bytes, counting from 0
  394.  
  395. Device Boot Start End MiB #blocks Id System
  396. /dev/mmcblk1p1 * 1 96 96 98304 e W95 FAT16 (LBA)
  397. /dev/mmcblk1p2 97 3687 3591 3677184 83 Linux
  398. /dev/mmcblk1p3 0 - 0 0 0 Empty
  399. /dev/mmcblk1p4 0 - 0 0 0 Empty
  400. Successfully wrote the new partition table
  401.  
  402. Re-reading the partition table ...
  403.  
  404. If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)
  405. to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1
  406. (See fdisk(8).)
  407. mkfs.vfat -F 16 /dev/mmcblk1p1 -n BEAGLEBONE
  408. -----------------------------
  409. mkfs.vfat 3.0.13 (30 Jun 2012)
  410. -----------------------------
  411. mkfs.ext4 /dev/mmcblk1p2 -L rootfs
  412. -----------------------------
  413. mke2fs 1.42.5 (29-Jul-2012)
  414. ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /dev/mmcblk1p2 is mounted.
  415. Discarding device blocks: done
  416. Filesystem label=rootfs
  417. OS type: Linux
  418. Block size=4096 (log=2)
  419. Fragment size=4096 (log=2)
  420. Stride=0 blocks, Stripe width=0 blocks
  421. 230144 inodes, 919296 blocks
  422. 45964 blocks (5.00%) reserved for the super user
  423. First data block=0
  424. Maximum filesystem blocks=943718400
  425. 29 block groups
  426. 32768 blocks per group, 32768 fragments per group
  427. 7936 inodes per group
  428. Superblock backups stored on blocks:
  429. 32768, 98304, 163840, 229376, 294912, 819200, 884736
  430.  
  431. Allocating group tables: done
  432. Writing inode tables: done
  433. Creating journal (16384 blocks): done
  434. Writing superblocks and filesystem accounting information: done
  435.  
  436. -----------------------------
  437. Copying: /dev/mmcblk0p1 -> /dev/mmcblk1p1
  438. rsync: /boot/uboot/ -> /tmp/boot/
  439. Copying: /dev/mmcblk0p2 -> /dev/mmcblk1p2
  440. [ 142.681844] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
  441. rsync: / -> /tmp/rootfs/
  442. Copying: Kernel modules
  443. rsync: /lib/modules/3.8.13-bone67/ -> /tmp/rootfs/lib/modules/3.8.13-bone67/
  444. /boot/uEnv.txt: disabling flasher script
  445. #Docs: http://elinux.org/Beagleboard:U-boot_partitioning_layout_2.0
  446.  
  447. uname_r=3.8.13-bone67
  448.  
  449. #dtb=
  450.  
  451. cmdline=quiet init=/lib/systemd/systemd
  452.  
  453. ##Example
  454. #cape_disable=capemgr.disable_partno=
  455. #cape_enable=capemgr.enable_partno=
  456.  
  457. ##Disable HDMI/eMMC
  458. #cape_disable=capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN,BB-BONE-EMMC-2G
  459.  
  460. ##Disable HDMI
  461. #cape_disable=capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN
  462.  
  463. ##Disable eMMC
  464. #cape_disable=capemgr.disable_partno=BB-BONE-EMMC-2G
  465.  
  466. ##Audio Cape (needs HDMI Audio disabled)
  467. #cape_disable=capemgr.disable_partno=BB-BONELT-HDMI
  468. #cape_enable=capemgr.enable_partno=BB-BONE-AUDI-02
  469.  
  470.  
  471.  
  472. ##enable BBB: eMMC Flasher:
  473. #cmdline=init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh
  474.  
  475. uuid=e388e359-8d1c-430c-824e-e218e1aaae6e
  476. Generating: /etc/fstab
  477. # /etc/fstab: static file system information.
  478. #
  479. UUID=e388e359-8d1c-430c-824e-e218e1aaae6e / ext4 noatime,errors=remount-ro 0 1
  480. debugfs /sys/kernel/debug debugfs defaults 0 0
  481. Syncing: /dev/mmcblk1
  482. /opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh: line 286: 210 Terminated cylon_leds
  483. 100000+0 records in
  484. 100000+0 records out
  485. 51200000 bytes (51 MB) copied, 1.55255 s, 33.0 MB/s
  486.  
  487. This script has now completed its task
  488. -----------------------------
  489. Shutting Down
  490. sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
  491. proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
  492. udev on /dev type devtmpfs (rw,relatime,size=10240k,nr_inodes=63175,mode=755)
  493. devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620)
  494. tmpfs on /run type tmpfs (rw,nosuid,relatime,size=101692k,mode=755)
  495. /dev/mmcblk0p2 on / type ext4 (ro,relatime,data=ordered)
  496.  
  497. -----------------------------
  498.  
  499. eMMC has been flashed, please remove power and microSD card
  500.  
  501. -----------------------------
  502. [ 422.337671] (NULL device *): gadget not registered.
  503. [ 422.346363] Disabling non-boot CPUs ...
  504. [ 422.353009] System halted.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!