API tools faq
paste
Advertisement
Guest User

Realtek 8192CU/Prop driver BETA/UNR - 8200ND - Shiki - dmesg

a guest
Jun 28th, 2013
53
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 113.93 KB | None | 0 0
raw download clone embed print report
  1. [ 0.100503] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
  2. [ 0.100559] pci 0000:00:1d.1: reg 20: [io 0x18e0-0x18ff]
  3. [ 0.100662] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
  4. [ 0.100717] pci 0000:00:1d.2: reg 20: [io 0x1c00-0x1c1f]
  5. [ 0.100835] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
  6. [ 0.100860] pci 0000:00:1d.7: reg 10: [mem 0xfc227000-0xfc2273ff]
  7. [ 0.100968] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
  8. [ 0.101015] pci 0000:00:1d.7: System wakeup disabled by ACPI
  9. [ 0.101054] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
  10. [ 0.101151] pci 0000:00:1e.0: System wakeup disabled by ACPI
  11. [ 0.101193] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
  12. [ 0.101378] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
  13. [ 0.101406] pci 0000:00:1f.2: reg 10: [io 0x1c48-0x1c4f]
  14. [ 0.101416] pci 0000:00:1f.2: reg 14: [io 0x183c-0x183f]
  15. [ 0.101427] pci 0000:00:1f.2: reg 18: [io 0x1c40-0x1c47]
  16. [ 0.101438] pci 0000:00:1f.2: reg 1c: [io 0x1838-0x183b]
  17. [ 0.101449] pci 0000:00:1f.2: reg 20: [io 0x1c20-0x1c3f]
  18. [ 0.101460] pci 0000:00:1f.2: reg 24: [mem 0xfc226000-0xfc2267ff]
  19. [ 0.101528] pci 0000:00:1f.2: PME# supported from D3hot
  20. [ 0.101598] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
  21. [ 0.101619] pci 0000:00:1f.3: reg 10: [mem 0xfc227400-0xfc2274ff 64bit]
  22. [ 0.101648] pci 0000:00:1f.3: reg 20: [io 0x1c60-0x1c7f]
  23. [ 0.101788] pci 0000:00:1c.0: PCI bridge to [bus 02]
  24. [ 0.101926] pci 0000:03:00.0: [8086:4237] type 00 class 0x028000
  25. [ 0.101970] pci 0000:03:00.0: reg 10: [mem 0xf4300000-0xf4301fff 64bit]
  26. [ 0.102178] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
  27. [ 0.104043] pci 0000:00:1c.1: PCI bridge to [bus 03]
  28. [ 0.104054] pci 0000:00:1c.1: bridge window [mem 0xf4300000-0xf43fffff]
  29. [ 0.104130] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
  30. [ 0.104138] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
  31. [ 0.104142] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff]
  32. [ 0.104150] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf40fffff 64bit pref]
  33. [ 0.104216] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
  34. [ 0.104224] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
  35. [ 0.104228] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfbffffff]
  36. [ 0.104236] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf41fffff 64bit pref]
  37. [ 0.104291] pci 0000:15:00.0: [1180:0476] type 02 class 0x060700
  38. [ 0.104314] pci 0000:15:00.0: proprietary Ricoh MMC controller disabled (via cardbus function)
  39. [ 0.104320] pci 0000:15:00.0: MMC cards are now supported by standard SDHCI controller
  40. [ 0.104342] pci 0000:15:00.0: reg 10: [mem 0xf4800000-0xf4800fff]
  41. [ 0.104384] pci 0000:15:00.0: supports D1 D2
  42. [ 0.104386] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  43. [ 0.104441] pci 0000:15:00.1: [1180:0832] type 00 class 0x0c0010
  44. [ 0.104466] pci 0000:15:00.1: reg 10: [mem 0xf4801000-0xf48017ff]
  45. [ 0.104581] pci 0000:15:00.1: supports D1 D2
  46. [ 0.104582] pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
  47. [ 0.104634] pci 0000:15:00.2: [1180:0822] type 00 class 0x080500
  48. [ 0.104660] pci 0000:15:00.2: reg 10: [mem 0xf4801800-0xf48018ff]
  49. [ 0.104774] pci 0000:15:00.2: supports D1 D2
  50. [ 0.104776] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
  51. [ 0.104830] pci 0000:15:00.4: [1180:0592] type 00 class 0x088000
  52. [ 0.104855] pci 0000:15:00.4: reg 10: [mem 0xf4802000-0xf48020ff]
  53. [ 0.104969] pci 0000:15:00.4: supports D1 D2
  54. [ 0.104971] pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
  55. [ 0.105025] pci 0000:15:00.5: [1180:0852] type 00 class 0x088000
  56. [ 0.105050] pci 0000:15:00.5: reg 10: [mem 0xf4802400-0xf48024ff]
  57. [ 0.105165] pci 0000:15:00.5: supports D1 D2
  58. [ 0.105167] pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
  59. [ 0.105267] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
  60. [ 0.105275] pci 0000:00:1e.0: bridge window [io 0x4000-0x7fff]
  61. [ 0.105280] pci 0000:00:1e.0: bridge window [mem 0xf4800000-0xf7ffffff]
  62. [ 0.105287] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff 64bit pref]
  63. [ 0.105290] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
  64. [ 0.105294] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
  65. [ 0.105295] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
  66. [ 0.105297] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
  67. [ 0.105299] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
  68. [ 0.105301] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
  69. [ 0.105303] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
  70. [ 0.105359] pci_bus 0000:16: busn_res: can not insert [bus 16-ff] under [bus 15-18] (conflicts with (null) [bus 15-18])
  71. [ 0.105365] pci_bus 0000:16: busn_res: [bus 16-ff] end is updated to 17
  72. [ 0.105497] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
  73. [ 0.105861] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
  74. [ 0.107533] ACPI: Enabled 3 GPEs in block 00 to 3F
  75. [ 0.107564] acpi root: \_SB_.PCI0 notify handler is installed
  76. [ 0.107615] Found 1 acpi root devices
  77. [ 0.110058] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
  78. [ 0.110700] ACPI: ACPI Dock Station Driver: 3 docks/bays found
  79. [ 0.111013] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
  80. [ 0.111019] vgaarb: loaded
  81. [ 0.111021] vgaarb: bridge control possible 0000:00:02.0
  82. [ 0.111093] SCSI subsystem initialized
  83. [ 0.111097] ACPI: bus type ATA registered
  84. [ 0.111112] libata version 3.00 loaded.
  85. [ 0.111112] ACPI: bus type USB registered
  86. [ 0.111112] usbcore: registered new interface driver usbfs
  87. [ 0.111112] usbcore: registered new interface driver hub
  88. [ 0.111112] usbcore: registered new device driver usb
  89. [ 0.111112] PCI: Using ACPI for IRQ routing
  90. [ 0.113553] PCI: pci_cache_line_size set to 64 bytes
  91. [ 0.113645] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
  92. [ 0.113647] e820: reserve RAM buffer [mem 0xbd4a1000-0xbfffffff]
  93. [ 0.113649] e820: reserve RAM buffer [mem 0xbd5b7000-0xbfffffff]
  94. [ 0.113652] e820: reserve RAM buffer [mem 0xbd6c6000-0xbfffffff]
  95. [ 0.113654] e820: reserve RAM buffer [mem 0xbda00000-0xbfffffff]
  96. [ 0.113745] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
  97. [ 0.113745] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
  98. [ 0.113745] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
  99. [ 0.116010] Switching to clocksource hpet
  100. [ 0.116057] pnp: PnP ACPI init
  101. [ 0.116070] ACPI: bus type PNP registered
  102. [ 0.136227] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
  103. [ 0.136234] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
  104. [ 0.136239] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
  105. [ 0.136244] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
  106. [ 0.136248] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
  107. [ 0.136253] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
  108. [ 0.136258] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
  109. [ 0.136263] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
  110. [ 0.136268] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
  111. [ 0.136273] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
  112. [ 0.136278] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
  113. [ 0.136283] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
  114. [ 0.136288] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
  115. [ 0.136293] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
  116. [ 0.136299] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
  117. [ 0.156176] system 00:01: [io 0x1000-0x107f] has been reserved
  118. [ 0.156182] system 00:01: [io 0x1180-0x11ff] has been reserved
  119. [ 0.156187] system 00:01: [io 0x0800-0x080f] has been reserved
  120. [ 0.156191] system 00:01: [io 0x15e0-0x15ef] has been reserved
  121. [ 0.156196] system 00:01: [io 0x1600-0x167f] has been reserved
  122. [ 0.156200] system 00:01: [io 0x1680-0x169f] has been reserved
  123. [ 0.156205] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
  124. [ 0.156210] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
  125. [ 0.156215] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
  126. [ 0.156220] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
  127. [ 0.156225] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
  128. [ 0.156230] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
  129. [ 0.156235] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
  130. [ 0.156285] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
  131. [ 0.156294] pnp 00:03: [dma 4]
  132. [ 0.156310] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
  133. [ 0.156334] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
  134. [ 0.156364] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
  135. [ 0.156395] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
  136. [ 0.156421] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
  137. [ 0.156451] pnp 00:08: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
  138. [ 0.176346] pnp 00:09: Plug and Play ACPI device, IDs PNP0c31 (active)
  139. [ 0.176749] pnp: PnP ACPI: found 10 devices
  140. [ 0.176754] ACPI: bus type PNP unregistered
  141. [ 0.183325] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
  142. [ 0.183330] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
  143. [ 0.183332] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
  144. [ 0.183343] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
  145. [ 0.183348] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
  146. [ 0.183386] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
  147. [ 0.183388] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
  148. [ 0.183390] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
  149. [ 0.183393] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
  150. [ 0.183395] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
  151. [ 0.183399] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
  152. [ 0.183406] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
  153. [ 0.183413] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
  154. [ 0.183420] pci 0000:00:1c.0: BAR 13: assigned [io 0x8000-0x8fff]
  155. [ 0.183425] pci 0000:00:1c.1: BAR 13: assigned [io 0x9000-0x9fff]
  156. [ 0.183431] pci 0000:00:1c.0: PCI bridge to [bus 02]
  157. [ 0.183436] pci 0000:00:1c.0: bridge window [io 0x8000-0x8fff]
  158. [ 0.183445] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
  159. [ 0.183452] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
  160. [ 0.183463] pci 0000:00:1c.1: PCI bridge to [bus 03]
  161. [ 0.183468] pci 0000:00:1c.1: bridge window [io 0x9000-0x9fff]
  162. [ 0.183476] pci 0000:00:1c.1: bridge window [mem 0xf4300000-0xf43fffff]
  163. [ 0.183483] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
  164. [ 0.183494] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
  165. [ 0.183499] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
  166. [ 0.183507] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff]
  167. [ 0.183514] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf40fffff 64bit pref]
  168. [ 0.183525] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
  169. [ 0.183530] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
  170. [ 0.183538] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfbffffff]
  171. [ 0.183545] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf41fffff 64bit pref]
  172. [ 0.183557] pci 0000:15:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
  173. [ 0.183560] pci 0000:15:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
  174. [ 0.183562] pci 0000:15:00.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
  175. [ 0.183564] pci 0000:15:00.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
  176. [ 0.183566] pci 0000:15:00.0: BAR 15: assigned [mem 0xf0000000-0xf3ffffff pref]
  177. [ 0.183573] pci 0000:15:00.0: BAR 16: assigned [mem 0xc4000000-0xc7ffffff]
  178. [ 0.183578] pci 0000:15:00.0: BAR 13: assigned [io 0x4000-0x40ff]
  179. [ 0.183583] pci 0000:15:00.0: BAR 14: assigned [io 0x4400-0x44ff]
  180. [ 0.183587] pci 0000:15:00.0: CardBus bridge to [bus 16-17]
  181. [ 0.183592] pci 0000:15:00.0: bridge window [io 0x4000-0x40ff]
  182. [ 0.183600] pci 0000:15:00.0: bridge window [io 0x4400-0x44ff]
  183. [ 0.183608] pci 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref]
  184. [ 0.183617] pci 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff]
  185. [ 0.183625] pci 0000:00:1e.0: PCI bridge to [bus 15-18]
  186. [ 0.183630] pci 0000:00:1e.0: bridge window [io 0x4000-0x7fff]
  187. [ 0.183638] pci 0000:00:1e.0: bridge window [mem 0xf4800000-0xf7ffffff]
  188. [ 0.183646] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff 64bit pref]
  189. [ 0.183867] pci 0000:00:1e.0: setting latency timer to 64
  190. [ 0.183905] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
  191. [ 0.183908] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
  192. [ 0.183910] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
  193. [ 0.183912] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
  194. [ 0.183914] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
  195. [ 0.183916] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
  196. [ 0.183917] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff]
  197. [ 0.183920] pci_bus 0000:02: resource 0 [io 0x8000-0x8fff]
  198. [ 0.183921] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff]
  199. [ 0.183923] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
  200. [ 0.183926] pci_bus 0000:03: resource 0 [io 0x9000-0x9fff]
  201. [ 0.183927] pci_bus 0000:03: resource 1 [mem 0xf4300000-0xf43fffff]
  202. [ 0.183929] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
  203. [ 0.183931] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
  204. [ 0.183933] pci_bus 0000:05: resource 1 [mem 0xf8000000-0xf9ffffff]
  205. [ 0.183935] pci_bus 0000:05: resource 2 [mem 0xf4000000-0xf40fffff 64bit pref]
  206. [ 0.183937] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff]
  207. [ 0.183939] pci_bus 0000:0d: resource 1 [mem 0xfa000000-0xfbffffff]
  208. [ 0.183941] pci_bus 0000:0d: resource 2 [mem 0xf4100000-0xf41fffff 64bit pref]
  209. [ 0.183943] pci_bus 0000:15: resource 0 [io 0x4000-0x7fff]
  210. [ 0.183945] pci_bus 0000:15: resource 1 [mem 0xf4800000-0xf7ffffff]
  211. [ 0.183947] pci_bus 0000:15: resource 2 [mem 0xf0000000-0xf3ffffff 64bit pref]
  212. [ 0.183949] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7]
  213. [ 0.183950] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff]
  214. [ 0.183952] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff]
  215. [ 0.183954] pci_bus 0000:15: resource 7 [mem 0x000d0000-0x000d3fff]
  216. [ 0.183956] pci_bus 0000:15: resource 8 [mem 0x000d4000-0x000d7fff]
  217. [ 0.183958] pci_bus 0000:15: resource 9 [mem 0x000d8000-0x000dbfff]
  218. [ 0.183960] pci_bus 0000:15: resource 10 [mem 0xc0000000-0xfebfffff]
  219. [ 0.183962] pci_bus 0000:16: resource 0 [io 0x4000-0x40ff]
  220. [ 0.183964] pci_bus 0000:16: resource 1 [io 0x4400-0x44ff]
  221. [ 0.183966] pci_bus 0000:16: resource 2 [mem 0xf0000000-0xf3ffffff pref]
  222. [ 0.183967] pci_bus 0000:16: resource 3 [mem 0xc4000000-0xc7ffffff]
  223. [ 0.183996] NET: Registered protocol family 2
  224. [ 0.184203] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
  225. [ 0.184586] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  226. [ 0.184918] TCP: Hash tables configured (established 65536 bind 65536)
  227. [ 0.184973] TCP: reno registered
  228. [ 0.184988] UDP hash table entries: 4096 (order: 5, 131072 bytes)
  229. [ 0.185057] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
  230. [ 0.185176] NET: Registered protocol family 1
  231. [ 0.185195] pci 0000:00:02.0: Boot video device
  232. [ 0.185212] pci 0000:00:1a.0: power state changed by ACPI to D0
  233. [ 0.185452] pci 0000:00:1a.2: power state changed by ACPI to D0
  234. [ 0.185696] pci 0000:00:1d.0: power state changed by ACPI to D0
  235. [ 0.186164] PCI: CLS 64 bytes, default 64
  236. [ 0.186217] Trying to unpack rootfs image as initramfs...
  237. [ 0.422179] Freeing initrd memory: 12716k freed
  238. [ 0.428151] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  239. [ 0.428167] software IO TLB [mem 0xb94a1000-0xbd4a1000] (64MB) mapped at [ffff8800b94a1000-ffff8800bd4a0fff]
  240. [ 0.428201] Simple Boot Flag at 0x35 set to 0x1
  241. [ 0.428322] Scanning for low memory corruption every 60 seconds
  242. [ 0.428515] Initialise module verification
  243. [ 0.428555] audit: initializing netlink socket (disabled)
  244. [ 0.428571] type=2000 audit(1372449227.427:1): initialized
  245. [ 0.443223] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  246. [ 0.444911] VFS: Disk quotas dquot_6.5.2
  247. [ 0.444953] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  248. [ 0.445382] fuse init (API version 7.22)
  249. [ 0.445485] msgmni has been set to 11736
  250. [ 0.445934] Key type asymmetric registered
  251. [ 0.445938] Asymmetric key parser 'x509' registered
  252. [ 0.445977] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  253. [ 0.446017] io scheduler noop registered
  254. [ 0.446021] io scheduler deadline registered (default)
  255. [ 0.446053] io scheduler cfq registered
  256. [ 0.446192] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
  257. [ 0.446301] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
  258. [ 0.446408] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
  259. [ 0.446514] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
  260. [ 0.446623] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
  261. [ 0.446631] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
  262. [ 0.446651] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
  263. [ 0.446656] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
  264. [ 0.446664] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
  265. [ 0.446683] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
  266. [ 0.446690] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
  267. [ 0.446711] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
  268. [ 0.446719] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
  269. [ 0.446772] intel_idle: does not run on family 6 model 23
  270. [ 0.447080] ACPI: AC Adapter [AC] (on-line)
  271. [ 0.447233] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
  272. [ 0.447431] ACPI: Lid Switch [LID]
  273. [ 0.447465] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
  274. [ 0.447473] ACPI: Sleep Button [SLPB]
  275. [ 0.447513] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
  276. [ 0.447519] ACPI: Power Button [PWRF]
  277. [ 0.447590] ACPI: Requesting acpi_cpufreq
  278. [ 0.450052] Monitor-Mwait will be used to enter C-1 state
  279. [ 0.450058] Monitor-Mwait will be used to enter C-2 state
  280. [ 0.450061] Monitor-Mwait will be used to enter C-3 state
  281. [ 0.450064] tsc: Marking TSC unstable due to TSC halts in idle
  282. [ 0.450077] ACPI: acpi_idle registered with cpuidle
  283. [ 0.493503] thermal LNXTHERM:00: registered as thermal_zone0
  284. [ 0.493509] ACPI: Thermal Zone [THM0] (45 C)
  285. [ 0.503913] thermal LNXTHERM:01: registered as thermal_zone1
  286. [ 0.503918] ACPI: Thermal Zone [THM1] (44 C)
  287. [ 0.503951] GHES: HEST is not enabled!
  288. [ 0.504026] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
  289. [ 0.504072] ACPI: Battery Slot [BAT0] (battery absent)
  290. [ 0.505436] Linux agpgart interface v0.103
  291. [ 0.505528] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
  292. [ 0.505625] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
  293. [ 0.506668] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
  294. [ 0.506789] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
  295. [ 0.508036] brd: module loaded
  296. [ 0.508679] loop: module loaded
  297. [ 0.508979] libphy: Fixed MDIO Bus: probed
  298. [ 0.509079] tun: Universal TUN/TAP device driver, 1.6
  299. [ 0.509083] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  300. [ 0.509119] PPP generic driver version 2.4.2
  301. [ 0.509163] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  302. [ 0.509168] ehci-pci: EHCI PCI platform driver
  303. [ 0.509270] ehci-pci 0000:00:1a.7: setting latency timer to 64
  304. [ 0.509286] ehci-pci 0000:00:1a.7: EHCI Host Controller
  305. [ 0.509295] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
  306. [ 0.509314] ehci-pci 0000:00:1a.7: debug port 1
  307. [ 0.513225] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
  308. [ 0.513243] ehci-pci 0000:00:1a.7: irq 23, io mem 0xfc226c00
  309. [ 0.519018] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
  310. [ 0.519059] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  311. [ 0.519064] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  312. [ 0.519070] usb usb1: Product: EHCI Host Controller
  313. [ 0.519074] usb usb1: Manufacturer: Linux 3.10.0-rc7-x1-1000hz ehci_hcd
  314. [ 0.519078] usb usb1: SerialNumber: 0000:00:1a.7
  315. [ 0.519174] hub 1-0:1.0: USB hub found
  316. [ 0.519180] hub 1-0:1.0: 6 ports detected
  317. [ 0.519439] ehci-pci 0000:00:1d.7: setting latency timer to 64
  318. [ 0.519449] ehci-pci 0000:00:1d.7: EHCI Host Controller
  319. [ 0.519457] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
  320. [ 0.519476] ehci-pci 0000:00:1d.7: debug port 1
  321. [ 0.523387] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
  322. [ 0.523400] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfc227000
  323. [ 0.529017] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
  324. [ 0.529050] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  325. [ 0.529055] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  326. [ 0.529060] usb usb2: Product: EHCI Host Controller
  327. [ 0.529064] usb usb2: Manufacturer: Linux 3.10.0-rc7-x1-1000hz ehci_hcd
  328. [ 0.529069] usb usb2: SerialNumber: 0000:00:1d.7
  329. [ 0.538245] hub 2-0:1.0: USB hub found
  330. [ 0.538252] hub 2-0:1.0: 6 ports detected
  331. [ 0.538290] Monitor-Mwait will be used to enter C-3 state
  332. [ 0.538712] ehci-platform: EHCI generic platform driver
  333. [ 0.538723] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  334. [ 0.538741] uhci_hcd: USB Universal Host Controller Interface driver
  335. [ 0.538810] uhci_hcd 0000:00:1a.0: setting latency timer to 64
  336. [ 0.538813] uhci_hcd 0000:00:1a.0: UHCI Host Controller
  337. [ 0.538821] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
  338. [ 0.538859] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
  339. [ 0.538895] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  340. [ 0.538900] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  341. [ 0.538906] usb usb3: Product: UHCI Host Controller
  342. [ 0.538910] usb usb3: Manufacturer: Linux 3.10.0-rc7-x1-1000hz uhci_hcd
  343. [ 0.538914] usb usb3: SerialNumber: 0000:00:1a.0
  344. [ 0.539016] hub 3-0:1.0: USB hub found
  345. [ 0.539024] hub 3-0:1.0: 2 ports detected
  346. [ 0.539167] uhci_hcd 0000:00:1a.1: setting latency timer to 64
  347. [ 0.539171] uhci_hcd 0000:00:1a.1: UHCI Host Controller
  348. [ 0.539179] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
  349. [ 0.539215] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
  350. [ 0.539248] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  351. [ 0.539253] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  352. [ 0.539258] usb usb4: Product: UHCI Host Controller
  353. [ 0.539262] usb usb4: Manufacturer: Linux 3.10.0-rc7-x1-1000hz uhci_hcd
  354. [ 0.539267] usb usb4: SerialNumber: 0000:00:1a.1
  355. [ 0.539350] hub 4-0:1.0: USB hub found
  356. [ 0.539355] hub 4-0:1.0: 2 ports detected
  357. [ 0.539495] uhci_hcd 0000:00:1a.2: setting latency timer to 64
  358. [ 0.539499] uhci_hcd 0000:00:1a.2: UHCI Host Controller
  359. [ 0.539506] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
  360. [ 0.539544] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
  361. [ 0.539580] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
  362. [ 0.539585] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  363. [ 0.539590] usb usb5: Product: UHCI Host Controller
  364. [ 0.539594] usb usb5: Manufacturer: Linux 3.10.0-rc7-x1-1000hz uhci_hcd
  365. [ 0.539599] usb usb5: SerialNumber: 0000:00:1a.2
  366. [ 0.539682] hub 5-0:1.0: USB hub found
  367. [ 0.539688] hub 5-0:1.0: 2 ports detected
  368. [ 0.539831] uhci_hcd 0000:00:1d.0: setting latency timer to 64
  369. [ 0.539835] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  370. [ 0.539844] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
  371. [ 0.539884] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
  372. [ 0.539918] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
  373. [ 0.539923] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  374. [ 0.539929] usb usb6: Product: UHCI Host Controller
  375. [ 0.539933] usb usb6: Manufacturer: Linux 3.10.0-rc7-x1-1000hz uhci_hcd
  376. [ 0.539937] usb usb6: SerialNumber: 0000:00:1d.0
  377. [ 0.540033] hub 6-0:1.0: USB hub found
  378. [ 0.540039] hub 6-0:1.0: 2 ports detected
  379. [ 0.540181] uhci_hcd 0000:00:1d.1: setting latency timer to 64
  380. [ 0.540185] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  381. [ 0.540192] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
  382. [ 0.540229] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
  383. [ 0.540261] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
  384. [ 0.540267] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  385. [ 0.540272] usb usb7: Product: UHCI Host Controller
  386. [ 0.540276] usb usb7: Manufacturer: Linux 3.10.0-rc7-x1-1000hz uhci_hcd
  387. [ 0.540280] usb usb7: SerialNumber: 0000:00:1d.1
  388. [ 0.540363] hub 7-0:1.0: USB hub found
  389. [ 0.540369] hub 7-0:1.0: 2 ports detected
  390. [ 0.540508] uhci_hcd 0000:00:1d.2: setting latency timer to 64
  391. [ 0.540512] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  392. [ 0.540519] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
  393. [ 0.540556] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
  394. [ 0.540589] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
  395. [ 0.540595] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  396. [ 0.540600] usb usb8: Product: UHCI Host Controller
  397. [ 0.540604] usb usb8: Manufacturer: Linux 3.10.0-rc7-x1-1000hz uhci_hcd
  398. [ 0.540608] usb usb8: SerialNumber: 0000:00:1d.2
  399. [ 0.540691] hub 8-0:1.0: USB hub found
  400. [ 0.540698] hub 8-0:1.0: 2 ports detected
  401. [ 0.540823] usbcore: registered new interface driver mdc800
  402. [ 0.540827] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
  403. [ 0.540839] usbcore: registered new interface driver microtekX6
  404. [ 0.540870] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
  405. [ 0.548788] serio: i8042 KBD port at 0x60,0x64 irq 1
  406. [ 0.548812] serio: i8042 AUX port at 0x60,0x64 irq 12
  407. [ 0.548906] mousedev: PS/2 mouse device common for all mice
  408. [ 0.549073] rtc_cmos 00:06: RTC can wake from S4
  409. [ 0.549205] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
  410. [ 0.549236] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
  411. [ 0.549281] cpuidle: using governor ladder
  412. [ 0.549325] cpuidle: using governor menu
  413. [ 0.549330] ledtrig-cpu: registered to indicate activity on CPUs
  414. [ 0.549433] TCP: cubic registered
  415. [ 0.549527] NET: Registered protocol family 10
  416. [ 0.549724] NET: Registered protocol family 17
  417. [ 0.549737] Key type dns_resolver registered
  418. [ 0.549925] Loading module verification certificates
  419. [ 0.550978] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 40107321652d9e4d75fbafbc6ff7acc0c27698d1'
  420. [ 0.550989] registered taskstats version 1
  421. [ 0.553562] Key type trusted registered
  422. [ 0.553970] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
  423. [ 0.555595] Key type encrypted registered
  424. [ 0.557948] rtc_cmos 00:06: setting system clock to 2013-06-28 19:53:48 UTC (1372449228)
  425. [ 0.560995] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  426. [ 0.561013] EDD information not available.
  427. [ 0.561240] Freeing unused kernel memory: 844k freed
  428. [ 0.575044] udevd[90]: starting version 175
  429. [ 0.643724] pps_core: module verification failed: signature and/or required key missing - tainting kernel
  430. [ 0.643887] pps_core: LinuxPPS API ver. 1 registered
  431. [ 0.643891] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  432. [ 0.644078] PTP clock support registered
  433. [ 0.644821] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
  434. [ 0.644826] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
  435. [ 0.644938] e1000e 0000:00:19.0: setting latency timer to 64
  436. [ 0.645034] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
  437. [ 0.645064] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
  438. [ 0.664903] sdhci: Secure Digital Host Controller Interface driver
  439. [ 0.664912] sdhci: Copyright(c) Pierre Ossman
  440. [ 0.665438] sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21)
  441. [ 0.666784] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
  442. [ 0.666800] mmc0: no vqmmc regulator found
  443. [ 0.666803] mmc0: no vmmc regulator found
  444. [ 0.667819] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
  445. [ 0.667880] mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
  446. [ 0.833313] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:25:95:ba:51
  447. [ 0.833324] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
  448. [ 0.833351] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF
  449. [ 0.833376] ahci 0000:00:1f.2: version 3.0
  450. [ 0.833510] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
  451. [ 0.833559] ahci: SSS flag set, parallel bus scan disabled
  452. [ 0.833587] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
  453. [ 0.833593] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc sxs
  454. [ 0.833602] ahci 0000:00:1f.2: setting latency timer to 64
  455. [ 0.834034] scsi0 : ahci
  456. [ 0.834124] scsi1 : ahci
  457. [ 0.834299] scsi2 : ahci
  458. [ 0.834384] scsi3 : ahci
  459. [ 0.834427] ata1: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226100 irq 45
  460. [ 0.834434] ata2: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226180 irq 45
  461. [ 0.834439] ata3: DUMMY
  462. [ 0.834442] ata4: DUMMY
  463. [ 1.139156] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  464. [ 1.141532] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
  465. [ 1.141543] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
  466. [ 1.141563] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
  467. [ 1.144471] ata1.00: ATA-8: WDC WD3200BEKT-00PVMT0, 01.01A01, max UDMA/133
  468. [ 1.144490] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  469. [ 1.147478] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
  470. [ 1.147486] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
  471. [ 1.147504] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
  472. [ 1.149783] ata1.00: configured for UDMA/133
  473. [ 1.150126] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEKT-0 01.0 PQ: 0 ANSI: 5
  474. [ 1.150516] sd 0:0:0:0: Attached scsi generic sg0 type 0
  475. [ 1.150568] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
  476. [ 1.150699] sd 0:0:0:0: [sda] Write Protect is off
  477. [ 1.150715] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  478. [ 1.150773] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  479. [ 1.219242] sda: sda1 sda2 sda3 < sda5 sda6 >
  480. [ 1.219765] sd 0:0:0:0: [sda] Attached SCSI disk
  481. [ 1.325143] usb 2-1: new high-speed USB device number 2 using ehci-pci
  482. [ 1.440999] usb 2-1: New USB device found, idVendor=2357, idProduct=0100
  483. [ 1.441031] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  484. [ 1.441046] usb 2-1: Product: 802.11n WLAN Adapter
  485. [ 1.441059] usb 2-1: Manufacturer: Realtek
  486. [ 1.441069] usb 2-1: SerialNumber: 00e04c000001
  487. [ 1.455113] ata2: SATA link down (SStatus 0 SControl 300)
  488. [ 1.647061] usb 4-1: new full-speed USB device number 2 using uhci_hcd
  489. [ 1.802269] usb 4-1: New USB device found, idVendor=08ff, idProduct=2810
  490. [ 1.802278] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  491. [ 1.802286] usb 4-1: Product: Fingerprint Sensor
  492. [ 2.011030] usb 4-2: new full-speed USB device number 3 using uhci_hcd
  493. [ 2.169269] usb 4-2: New USB device found, idVendor=0a5c, idProduct=2145
  494. [ 2.169279] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  495. [ 2.169287] usb 4-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II
  496. [ 2.169294] usb 4-2: Manufacturer: Lenovo Computer Corp
  497. [ 3.018252] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
  498. [ 11.267993] Adding 7811068k swap on /dev/sda5. Priority:-1 extents:1 across:7811068k FS
  499. [ 11.442358] udevd[348]: starting version 175
  500. [ 11.915946] ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20130328/utaddress-251)
  501. [ 11.915952] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  502. [ 11.915957] ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130328/utaddress-251)
  503. [ 11.915960] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  504. [ 11.915961] ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130328/utaddress-251)
  505. [ 11.915964] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  506. [ 11.915965] lpc_ich: Resource conflict(s) found affecting gpio_ich
  507. [ 12.100350] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x610
  508. [ 12.128765] cfg80211: Calling CRDA to update world regulatory domain
  509. [ 12.166517] wmi: Mapper loaded
  510. [ 12.184516] Bluetooth: Core ver 2.16
  511. [ 12.184550] NET: Registered protocol family 31
  512. [ 12.184552] Bluetooth: HCI device and connection manager initialized
  513. [ 12.184564] Bluetooth: HCI socket layer initialized
  514. [ 12.184567] Bluetooth: L2CAP socket layer initialized
  515. [ 12.184569] Bluetooth: SCO socket layer initialized
  516. [ 12.230870] usbcore: registered new interface driver btusb
  517. [ 12.235794] Intel(R) Wireless WiFi driver for Linux, in-tree:
  518. [ 12.235797] Copyright(c) 2003-2013 Intel Corporation
  519. [ 12.235951] iwlwifi 0000:03:00.0: irq 46 for MSI/MSI-X
  520. [ 12.264046] tpm_tis 00:09: 1.2 TPM (device-id 0x1020, rev-id 6)
  521. [ 12.264050] tpm_tis 00:09: Intel iTPM workaround enabled
  522. [ 12.288946] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x610
  523. [ 12.290507] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
  524. [ 12.336044] tpm_tis 00:09: TPM is disabled/deactivated (0x6)
  525. [ 12.349037] cfg80211: World regulatory domain updated:
  526. [ 12.349040] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  527. [ 12.349042] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  528. [ 12.349044] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  529. [ 12.349045] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  530. [ 12.349047] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  531. [ 12.349048] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  532. [ 12.367025] rtl8192cu driver version=v4.0.1-1_6911.20130308
  533. [ 12.367028] build time: Jun 28 2013 19:53:07
  534. [ 12.367060]
  535. [ 12.367060] usb_endpoint_descriptor(0):
  536. [ 12.367062] bLength=7
  537. [ 12.367063] bDescriptorType=5
  538. [ 12.367064] bEndpointAddress=81
  539. [ 12.367065] wMaxPacketSize=200
  540. [ 12.367066] bInterval=0
  541. [ 12.367067] RT_usb_endpoint_is_bulk_in = 1
  542. [ 12.367068]
  543. [ 12.367068] usb_endpoint_descriptor(1):
  544. [ 12.367069] bLength=7
  545. [ 12.367070] bDescriptorType=5
  546. [ 12.367071] bEndpointAddress=2
  547. [ 12.367072] wMaxPacketSize=200
  548. [ 12.367073] bInterval=0
  549. [ 12.367074] RT_usb_endpoint_is_bulk_out = 2
  550. [ 12.367075]
  551. [ 12.367075] usb_endpoint_descriptor(2):
  552. [ 12.367076] bLength=7
  553. [ 12.367077] bDescriptorType=5
  554. [ 12.367078] bEndpointAddress=3
  555. [ 12.367079] wMaxPacketSize=200
  556. [ 12.367080] bInterval=0
  557. [ 12.367081] RT_usb_endpoint_is_bulk_out = 3
  558. [ 12.367082]
  559. [ 12.367082] usb_endpoint_descriptor(3):
  560. [ 12.367083] bLength=7
  561. [ 12.367084] bDescriptorType=5
  562. [ 12.367085] bEndpointAddress=84
  563. [ 12.367086] wMaxPacketSize=40
  564. [ 12.367087] bInterval=1
  565. [ 12.367088] RT_usb_endpoint_is_int_in = 4, Interval = 1
  566. [ 12.367089] nr_endpoint=4, in_num=2, out_num=2
  567. [ 12.367089]
  568. [ 12.367090] USB_SPEED_HIGH
  569. [ 12.367098] CHIP TYPE: RTL8188C_8192C
  570. [ 12.367105] register rtw_netdev_ops to netdev_ops
  571. [ 12.367107] rtw_handle_dualmac(): pbuddy_padapter == NULL, Set pbuddy_padapter
  572. [ 12.367328] Chip Version ID: VERSION_NORMAL_TSMC_CHIP_92C.
  573. [ 12.367331] RF_Type is 2!!
  574. [ 12.367704] EEPROM type is E-FUSE
  575. [ 12.367706] ====> ReadAdapterInfo8192C
  576. [ 12.367835] Boot from EFUSE, Autoload OK !
  577. [ 12.392194] iwlwifi 0000:03:00.0: loaded firmware version 8.83.5.1 build 33692 op_mode iwldvm
  578. [ 12.404220] r592: driver successfully loaded
  579. [ 12.484553] [drm] Initialized drm 1.1.0 20060810
  580. [ 12.503843] EEPROMVID = 0x2357
  581. [ 12.503846] EEPROMPID = 0x0100
  582. [ 12.503848] EEPROMCustomerID : 0x00
  583. [ 12.503849] EEPROMSubCustomerID: 0x00
  584. [ 12.503851] RT_CustomerID: 0x00
  585. [ 12.503854] _ReadMACAddress MAC Address from EFUSE = f8:1a:67:09:78:c3
  586. [ 12.503862] EEPROMRegulatory = 0x0
  587. [ 12.503863] _ReadBoardType(0)
  588. [ 12.503864] BT Coexistance = disable
  589. [ 12.503866] mlmepriv.ChannelPlan = 0x02
  590. [ 12.503867] _ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(0)
  591. [ 12.503869] ### PS params=> power_mgnt(1),usbss_enable(0) ###
  592. [ 12.503870] ### AntDivCfg(0)
  593. [ 12.503871] readAdapterInfo_8192CU(): REPLACEMENT = 1
  594. [ 12.503873] <==== ReadAdapterInfo8192C in 136 ms
  595. [ 12.504113] rtw_macaddr_cfg MAC Address = f8:1a:67:09:78:c3
  596. [ 12.504116] MAC Address from pnetdev->dev_addr= f8:1a:67:09:78:c3
  597. [ 12.504532] bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
  598. [ 12.504611] usbcore: registered new interface driver rtl8192cu
  599. [ 12.591719] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
  600. [ 12.591724] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
  601. [ 12.591726] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
  602. [ 12.591728] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
  603. [ 12.591729] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
  604. [ 12.591731] iwlwifi 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
  605. [ 12.591760] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
  606. [ 12.620587] [drm] Memory usable by graphics device = 2048M
  607. [ 12.620596] i915 0000:00:02.0: setting latency timer to 64
  608. [ 12.660844] i915 0000:00:02.0: irq 47 for MSI/MSI-X
  609. [ 12.660852] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  610. [ 12.660854] [drm] Driver supports precise vblank timestamp query.
  611. [ 12.660902] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
  612. [ 12.715938] fbcon: inteldrmfb (fb0) is primary device
  613. [ 12.776109] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
  614. [ 12.776308] BUG: unable to handle kernel NULL pointer dereference at 0000000000000005
  615. [ 12.776318] IP: [<ffffffffa02b8617>] iwl_dbgfs_register+0x27/0x70 [iwldvm]
  616. [ 12.776320] PGD 0
  617. [ 12.776321] Oops: 0000 [#1] PREEMPT SMP
  618. [ 12.776336] Modules linked in: arc4(F) snd_hwdep(F) snd_pcm(F) snd_seq(F) snd_page_alloc(F) snd_seq_device(F) snd_timer(F) i915(F+) iwldvm(F+) mac80211(F) drm_kms_helper(F) drm(F) snd(F) r592(F) soundcore(F) 8192cu(OF) coretemp(F) memstick(F) i2c_algo_bit(F) tpm_tis(F) iwlwifi(F) btusb(F) bluetooth(F) wmi(F) psmouse(F) cfg80211(F) serio_raw(F) microcode(F) video(F) lpc_ich(F) sdhci_pci(F) sdhci(F) ahci(F) libahci(F) e1000e(F) ptp(F) pps_core(F)
  619. [ 12.776339] CPU: 0 PID: 735 Comm: modprobe Tainted: GF O 3.10.0-rc7-x1-1000hz #1
  620. [ 12.776340] Hardware name: LENOVO 208252G/208252G, BIOS 6FET92WW (3.22 ) 12/14/2011
  621. [ 12.776340] task: ffff8801a2b24f10 ti: ffff8801a2a60000 task.ti: ffff8801a2a60000
  622. [ 12.776346] RIP: 0010:[<ffffffffa02b8617>] [<ffffffffa02b8617>] iwl_dbgfs_register+0x27/0x70 [iwldvm]
  623. [ 12.776347] RSP: 0018:ffff8801a2a61c40 EFLAGS: 00010202
  624. [ 12.776348] RAX: 0000000000000000 RBX: ffff8801a0bb97a0 RCX: ffffffff8189f5a8
  625. [ 12.776349] RDX: 0000000000000000 RSI: ffffffffffffffed RDI: ffff8801a0bb97b0
  626. [ 12.776349] RBP: ffff8801a2a61cb0 R08: 0000000000000000 R09: 0000000000000000
  627. [ 12.776350] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801afdf5210
  628. [ 12.776350] R13: ffff8801a0bb97b0 R14: 0000000000000000 R15: ffff8801a2a61cc8
  629. [ 12.776352] FS: 00007fec19772740(0000) GS:ffff8801bbc00000(0000) knlGS:0000000000000000
  630. [ 12.776352] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  631. [ 12.776353] CR2: 0000000000000005 CR3: 00000001a34e8000 CR4: 00000000000007f0
  632. [ 12.776354] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  633. [ 12.776354] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  634. [ 12.776355] Stack:
  635. [ 12.776356] ffff880100000025 0000000000000000 ffff8801ac024100 0000096c00000000
  636. [ 12.776358] 0000000000000000 ffff8801a0bb97b0 000000000000000d ffff8801a0bb97b0
  637. [ 12.776359] 0000000000000000 ffff8801a2a61cc8 ffff8801a2a61cb0 ffffffffa02a9a79
  638. [ 12.776359] Call Trace:
  639. [ 12.776366] [<ffffffffa02a9a79>] ? iwlagn_mac_setup_register+0x1c9/0x2b0 [iwldvm]
  640. [ 12.776370] [<ffffffffa02a35a2>] iwl_op_mode_dvm_start+0x8e2/0xa50 [iwldvm]
  641. [ 12.776375] [<ffffffffa0133593>] iwl_opmode_register+0xe3/0x100 [iwlwifi]
  642. [ 12.776379] [<ffffffffa0203035>] iwl_init+0x35/0x1000 [iwldvm]
  643. [ 12.776381] [<ffffffffa0203000>] ? 0xffffffffa0202fff
  644. [ 12.776385] [<ffffffff810002fa>] do_one_initcall+0x10a/0x160
  645. [ 12.776388] [<ffffffff81090613>] load_module+0x1c53/0x25c0
  646. [ 12.776390] [<ffffffff8108ce00>] ? unset_module_init_ro_nx+0x80/0x80
  647. [ 12.776392] [<ffffffff81091012>] SyS_init_module+0x92/0xb0
  648. [ 12.776395] [<ffffffff81525d96>] system_call_fastpath+0x1a/0x1f
  649. [ 12.776409] Code: bb 0f 1f 00 55 48 89 e5 48 83 ec 70 48 89 b7 f0 2e 00 00 65 48 8b 04 25 28 00 00 00 48 89 45 f8 31 c0 80 bf 6c 23 00 00 00 74 27 <48> 8b 46 18 48 8d 7d 94 be 64 00 00 00 48 8b 50 18 4c 8b 40 28
  650. [ 12.776414] RIP [<ffffffffa02b8617>] iwl_dbgfs_register+0x27/0x70 [iwldvm]
  651. [ 12.776414] RSP <ffff8801a2a61c40>
  652. [ 12.776415] CR2: 0000000000000005
  653. [ 12.776417] ---[ end trace 31cb0f18af5d5c4f ]---
  654. [ 12.777040] iwlwifi 0000:03:00.0: failed to load module iwldvm (error 9), is dynamic loading enabled?
  655. [ 12.824345] Non-volatile memory driver v1.3
  656. [ 12.877421] thinkpad_acpi: ThinkPad ACPI Extras v0.24
  657. [ 12.877422] thinkpad_acpi: http://ibm-acpi.sf.net/
  658. [ 12.877422] thinkpad_acpi: ThinkPad BIOS 6FET92WW (3.22 ), EC 7VHT16WW-1.06
  659. [ 12.877423] thinkpad_acpi: Lenovo ThinkPad T500, model 208252G
  660. [ 12.900480] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
  661. [ 12.900783] thinkpad_acpi: radio switch found; radios are enabled
  662. [ 12.900886] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
  663. [ 12.900886] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
  664. [ 12.903687] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
  665. [ 12.907944] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
  666. [ 12.908108] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
  667. [ 12.909262] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input4
  668. [ 13.013032] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04791/0xb00000/0x20000, board id: 71, fw id: 434116
  669. [ 13.013037] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
  670. [ 13.056494] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
  671. [ 13.282150] Console: switching to colour frame buffer device 160x50
  672. [ 13.334957] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
  673. [ 13.336236] i915 0000:00:02.0: registered panic notifier
  674. [ 13.350646] acpi device:02: registered as cooling_device2
  675. [ 13.352063] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
  676. [ 13.353505] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
  677. [ 13.355238] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
  678. [ 13.356841] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
  679. [ 13.525388] hda_codec: CX20561 (Hermosa): BIOS auto-probing.
  680. [ 13.532192] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
  681. [ 13.532632] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
  682. [ 13.532794] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
  683. [ 13.533023] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
  684. [ 16.418718] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
  685. [ 16.450259] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
  686. [ 17.002855] init: failsafe main process (855) killed by TERM signal
  687. [ 17.347675] init: avahi-cups-reload main process (925) terminated with status 1
  688. [ 17.518366] Bluetooth: RFCOMM TTY layer initialized
  689. [ 17.518406] Bluetooth: RFCOMM socket layer initialized
  690. [ 17.518435] Bluetooth: RFCOMM ver 1.11
  691. [ 17.977624] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
  692. [ 18.111222] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  693. [ 18.111266] Bluetooth: BNEP filters: protocol multicast
  694. [ 18.111300] Bluetooth: BNEP socket layer initialized
  695. [ 18.219393] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input11
  696. [ 18.877199] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
  697. [ 18.978128] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
  698. [ 18.978265] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  699. [ 18.980479] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
  700. [ 18.983929] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
  701. [ 19.165126] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
  702. [ 19.168218] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
  703. [ 19.286108] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  704. [ 19.296761] rtw_wx_set_scan: bDriverStopped=1, bup=0, hw_init_completed=0
  705. [ 19.297893] +871x_drv - drv_open, bup=0
  706. [ 19.302606] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
  707. [ 19.302614] FirmwareDownload92C accquire FW from embedded image
  708. [ 19.302619] fw_ver=v88, fw_subver=2, sig=0x88c0
  709. [ 19.332237] fw download ok!
  710. [ 19.332249] Set RF Chip ID to RF_6052 and RF type to 2.
  711. [ 19.697087] IQK:Start!!!
  712. [ 19.708830] Path A Rx IQK fail!!
  713. [ 19.711709] Path A Rx IQK fail!!
  714. [ 19.711713] Path A IQK Only Tx Success!!
  715. [ 19.716205] Path B IQK Success!!
  716. [ 19.724706] Path A IQK Success!!
  717. [ 19.729460] Path B IQK Success!!
  718. [ 19.742087] Path A IQK Success!!
  719. [ 19.746856] Path B IQK Success!!
  720. [ 19.751593] IQK: final_candidate is 3
  721. [ 19.751600] IQK: RegE94=ff RegE9C=3fa RegEA4=0 RegEAC=0 RegEB4=102 RegEBC=10 RegEC4=fd RegECC=3fd
  722. [ 19.751600] Path A IQ Calibration Success !
  723. [ 19.752967] _PHY_PathAFillIQKMatrix only Tx OK
  724. [ 19.752973] Path B IQ Calibration Success !
  725. [ 19.862835] pdmpriv->TxPowerTrackControl = 1
  726. [ 19.867581] rtl8192cu_hal_init in 570ms
  727. [ 19.869707] MAC Address = f8:1a:67:09:78:c3
  728. [ 19.874464] -871x_drv - drv_open, bup=1
  729. [ 19.874501] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
  730. [ 19.875130] (2)871x_drv - drv_close, bup=1, hw_init_completed=1
  731. [ 19.876328] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  732. [ 19.882187] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
  733. [ 19.882577] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  734. [ 19.883204] -871x_drv - drv_close, bup=1
  735. [ 19.883363] set_mode = IW_MODE_INFRA
  736. [ 19.883495] +871x_drv - drv_open, bup=1
  737. [ 19.883501] -871x_drv - drv_open, bup=1
  738. [ 19.883513] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
  739. [ 19.886203] hw_var_set_opmode()-4221 mode = 2
  740. [ 19.887883] (2)871x_drv - drv_close, bup=1, hw_init_completed=1
  741. [ 19.889073] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  742. [ 19.894843] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
  743. [ 19.895074] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  744. [ 19.895702] -871x_drv - drv_close, bup=1
  745. [ 19.895790] +871x_drv - drv_open, bup=1
  746. [ 19.895794] -871x_drv - drv_open, bup=1
  747. [ 19.895806] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
  748. [ 19.895982] (2)871x_drv - drv_close, bup=1, hw_init_completed=1
  749. [ 19.897205] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  750. [ 19.904224] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
  751. [ 19.904454] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  752. [ 19.905134] -871x_drv - drv_close, bup=1
  753. [ 19.905244] +871x_drv - drv_open, bup=1
  754. [ 19.905250] -871x_drv - drv_open, bup=1
  755. [ 19.905263] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
  756. [ 19.905358] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
  757. [ 19.905362] set_mode = IW_MODE_INFRA
  758. [ 19.905420] =>rtw_wx_set_essid
  759. [ 19.905422] ssid=g\xffffffc6isQ\xffffffffJ\xffffffec)\xffffffcd\xffffffba\xffffffba\xffffffab\xfffffff2\xfffffffb\xffffffe3F|\xffffffc2T\xfffffff8\x1b\xffffffe8\xffffffe7\xffffff8dvZ.c3\xffffff9f\xffffffc9\xffffff9a\xffffff9a\xffffffc2`}\x06, len=32
  760. [ 19.905424] Set SSID under fw_state=0x00000008
  761. [ 19.905427] <=rtw_wx_set_essid, ret 0
  762. [ 19.906452] hw_var_set_opmode()-4221 mode = 2
  763. [ 19.915176] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
  764. [ 21.254955] survey done event(25)
  765. [ 21.254962] rtw_select_and_join_from_scanned_queue: return _FAIL(candidate == NULL)
  766. [ 21.254964] try_to_join, but select scanning queue fail, to_roaming:0
  767. [ 23.922704] ==>rtw_ps_processor .fw_state(8)
  768. [ 23.922709] ==>ips_enter cnts:1
  769. [ 23.922711] ===> rtw_ips_pwr_down...................
  770. [ 23.922946] ====> rtw_ips_dev_unload...
  771. [ 23.948829] usb_read_port_cancel
  772. [ 23.949080] usb_read_port_complete()-1290: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
  773. [ 23.951957] usb_read_port_complete()-1290: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
  774. [ 23.952201] usb_read_port_complete()-1290: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
  775. [ 23.952451] usb_read_port_complete()-1290: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
  776. [ 23.952461] usb_write_port_cancel
  777. [ 23.952479] ==> rtl8192cu_hal_deinit
  778. [ 23.952481] bkeepfwalive(0)
  779. [ 23.952482] card disble without HWSM...........
  780. [ 23.957448] <=== rtw_ips_pwr_down..................... in 35ms
  781. [ 26.300234] wlan0: authenticate with d8:5d:4c:d5:07:be
  782. [ 26.303462] wlan0: send auth to d8:5d:4c:d5:07:be (try 1/3)
  783. [ 26.306403] wlan0: authenticated
  784. [ 26.307031] wlan0: associate with d8:5d:4c:d5:07:be (try 1/3)
  785. [ 26.312075] wlan0: RX AssocResp from d8:5d:4c:d5:07:be (capab=0x411 status=0 aid=2)
  786. [ 26.314796] wlan0: associated
  787. [ 26.314823] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  788. [ 26.314881] cfg80211: Calling CRDA for country: US
  789. [ 26.318771] cfg80211: Regulatory domain changed to country: US
  790. [ 26.318777] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  791. [ 26.318779] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  792. [ 26.318781] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
  793. [ 26.318782] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  794. [ 26.318784] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  795. [ 26.318785] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  796. [ 26.318787] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
  797. [ 43.004788] _rtw_pwr_wakeup call ips_leave....
  798. [ 43.004800] ==>ips_leave cnts:1
  799. [ 43.004804] ===> rtw_ips_pwr_up..............
  800. [ 43.004812] ===> ips_netdrv_open.........
  801. [ 43.009963] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
  802. [ 43.009970] FirmwareDownload92C accquire FW from embedded image
  803. [ 43.009975] fw_ver=v88, fw_subver=2, sig=0x88c0
  804. [ 43.035965] fw download ok!
  805. [ 43.035971] Set RF Chip ID to RF_6052 and RF type to 2.
  806. [ 43.396146] IQK:Start!!!
  807. [ 43.407906] Path A IQK Success!!
  808. [ 43.412662] Path B IQK Success!!
  809. [ 43.421153] Path A IQK Success!!
  810. [ 43.425918] Path B IQK Success!!
  811. [ 43.430654] IQK: final_candidate is 0
  812. [ 43.430663] IQK: RegE94=fe RegE9C=3fb RegEA4=ff RegEAC=3ff RegEB4=102 RegEBC=11 RegEC4=ff RegECC=3ff
  813. [ 43.430663] Path A IQ Calibration Success !
  814. [ 43.432783] Path B IQ Calibration Success !
  815. [ 43.542838] pdmpriv->TxPowerTrackControl = 1
  816. [ 43.547627] rtl8192cu_hal_init in 543ms
  817. [ 43.549857] <=== rtw_ips_pwr_up.............. in 545ms
  818. [ 43.550019] ==> ips_leave.....LED(0x00028080)...
  819. [ 44.898147] survey done event(2e)
  820. [ 45.551096] ==>rtw_ps_processor .fw_state(8)
  821. [ 45.551107] ==>ips_enter cnts:2
  822. [ 45.551110] ===> rtw_ips_pwr_down...................
  823. [ 45.551356] ====> rtw_ips_dev_unload...
  824. [ 45.574740] usb_read_port_cancel
  825. [ 45.574968] usb_read_port_complete()-1290: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
  826. [ 45.575225] usb_read_port_complete()-1290: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
  827. [ 45.575477] usb_read_port_complete()-1290: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
  828. [ 45.575737] usb_read_port_complete()-1290: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
  829. [ 45.575754] usb_write_port_cancel
  830. [ 45.575774] ==> rtl8192cu_hal_deinit
  831. [ 45.575776] bkeepfwalive(0)
  832. [ 45.575777] card disble without HWSM...........
  833. [ 45.580719] <=== rtw_ips_pwr_down..................... in 29ms
  834. [ 76.003654] _rtw_pwr_wakeup call ips_leave....
  835. [ 76.003667] ==>ips_leave cnts:2
  836. [ 76.003671] ===> rtw_ips_pwr_up..............
  837. [ 76.003678] ===> ips_netdrv_open.........
  838. [ 76.008457] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
  839. [ 76.008465] FirmwareDownload92C accquire FW from embedded image
  840. [ 76.008470] fw_ver=v88, fw_subver=2, sig=0x88c0
  841. [ 76.033717] fw download ok!
  842. [ 76.033725] Set RF Chip ID to RF_6052 and RF type to 2.
  843. [ 76.394142] IQK:Start!!!
  844. [ 76.405906] Path A Rx IQK fail!!
  845. [ 76.408784] Path A IQK Success!!
  846. [ 76.413519] Path B IQK Success!!
  847. [ 76.422026] Path A Rx IQK fail!!
  848. [ 76.424899] Path A IQK Success!!
  849. [ 76.429658] Path B IQK Success!!
  850. [ 76.442288] Path A Rx IQK fail!!
  851. [ 76.445169] Path A Rx IQK fail!!
  852. [ 76.445175] Path A IQK Only Tx Success!!
  853. [ 76.449666] Path B IQK Success!!
  854. [ 76.454418] IQK: final_candidate is 3
  855. [ 76.454426] IQK: RegE94=fe RegE9C=3fb RegEA4=0 RegEAC=0 RegEB4=102 RegEBC=10 RegEC4=fd RegECC=3fd
  856. [ 76.454426] Path A IQ Calibration Success !
  857. [ 76.455794] _PHY_PathAFillIQKMatrix only Tx OK
  858. [ 76.455799] Path B IQ Calibration Success !
  859. [ 76.565970] pdmpriv->TxPowerTrackControl = 1
  860. [ 76.570610] rtl8192cu_hal_init in 567ms
  861. [ 76.572744] <=== rtw_ips_pwr_up.............. in 569ms
  862. [ 76.572849] ==> ips_leave.....LED(0x00028080)...
  863. [ 77.921153] survey done event(2d)
  864. [ 78.575069] ==>rtw_ps_processor .fw_state(8)
  865. [ 78.575080] ==>ips_enter cnts:3
  866. [ 78.575084] ===> rtw_ips_pwr_down...................
  867. [ 78.575367] ====> rtw_ips_dev_unload...
  868. [ 78.598754] usb_read_port_cancel
  869. [ 78.598980] usb_read_port_complete()-1290: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
  870. [ 78.599240] usb_read_port_complete()-1290: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
  871. [ 78.599491] usb_read_port_complete()-1290: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
  872. [ 78.599737] usb_read_port_complete()-1290: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
  873. [ 78.599755] usb_write_port_cancel
  874. [ 78.599775] ==> rtl8192cu_hal_deinit
  875. [ 78.599777] bkeepfwalive(0)
  876. [ 78.599778] card disble without HWSM...........
  877. [ 78.604740] <=== rtw_ips_pwr_down..................... in 29ms
  878. [ 119.003721] _rtw_pwr_wakeup call ips_leave....
  879. [ 119.003732] ==>ips_leave cnts:3
  880. [ 119.003736] ===> rtw_ips_pwr_up..............
  881. [ 119.003743] ===> ips_netdrv_open.........
  882. [ 119.008465] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
  883. [ 119.008473] FirmwareDownload92C accquire FW from embedded image
  884. [ 119.008478] fw_ver=v88, fw_subver=2, sig=0x88c0
  885. [ 119.034092] fw download ok!
  886. [ 119.034098] Set RF Chip ID to RF_6052 and RF type to 2.
  887. [ 119.395136] IQK:Start!!!
  888. [ 119.406905] Path A IQK Success!!
  889. [ 119.411642] Path B IQK Success!!
  890. [ 119.420145] Path A Rx IQK fail!!
  891. [ 119.423024] Path A IQK Success!!
  892. [ 119.427775] Path B IQK Success!!
  893. [ 119.432529] IQK: final_candidate is 0
  894. [ 119.432537] IQK: RegE94=fe RegE9C=3fa RegEA4=100 RegEAC=0 RegEB4=102 RegEBC=10 RegEC4=fd RegECC=3fd
  895. [ 119.432537] Path A IQ Calibration Success !
  896. [ 119.434652] Path B IQ Calibration Success !
  897. [ 119.544841] pdmpriv->TxPowerTrackControl = 1
  898. [ 119.549464] rtl8192cu_hal_init in 546ms
  899. [ 119.551855] <=== rtw_ips_pwr_up.............. in 548ms
  900. [ 119.551960] ==> ips_leave.....LED(0x00028080)...
  901. [ 120.900144] survey done event(2e)
  902. [ 121.555071] ==>rtw_ps_processor .fw_state(8)
  903. [ 121.555082] ==>ips_enter cnts:4
  904. [ 121.555086] ===> rtw_ips_pwr_down...................
  905. [ 121.555351] ====> rtw_ips_dev_unload...
  906. [ 121.578735] usb_read_port_cancel
  907. [ 121.578978] usb_read_port_complete()-1290: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
  908. [ 121.579246] usb_read_port_complete()-1290: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
  909. [ 121.579479] usb_read_port_complete()-1290: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
  910. [ 121.579737] usb_read_port_complete()-1290: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
  911. [ 121.579752] usb_write_port_cancel
  912. [ 121.579773] ==> rtl8192cu_hal_deinit
  913. [ 121.579775] bkeepfwalive(0)
  914. [ 121.579777] card disble without HWSM...........
  915. [ 121.584717] <=== rtw_ips_pwr_down..................... in 29ms
  916. [ 172.003173] _rtw_pwr_wakeup call ips_leave....
  917. [ 172.003185] ==>ips_leave cnts:4
  918. [ 172.003189] ===> rtw_ips_pwr_up..............
  919. [ 172.003196] ===> ips_netdrv_open.........
  920. [ 172.007954] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
  921. [ 172.007962] FirmwareDownload92C accquire FW from embedded image
  922. [ 172.007967] fw_ver=v88, fw_subver=2, sig=0x88c0
  923. [ 172.033585] fw download ok!
  924. [ 172.033592] Set RF Chip ID to RF_6052 and RF type to 2.
  925. [ 172.394137] IQK:Start!!!
  926. [ 172.405902] Path A Rx IQK fail!!
  927. [ 172.408762] Path A IQK Success!!
  928. [ 172.413532] Path B IQK Success!!
  929. [ 172.422022] Path A Rx IQK fail!!
  930. [ 172.424918] Path A Rx IQK fail!!
  931. [ 172.424924] Path A IQK Only Tx Success!!
  932. [ 172.429398] Path B IQK Success!!
  933. [ 172.442033] Path A IQK Success!!
  934. [ 172.446785] Path B IQK Success!!
  935. [ 172.451535] IQK: final_candidate is 0
  936. [ 172.451542] IQK: RegE94=fe RegE9C=3fa RegEA4=100 RegEAC=3ff RegEB4=102 RegEBC=10 RegEC4=fd RegECC=3fd
  937. [ 172.451542] Path A IQ Calibration Success !
  938. [ 172.453662] Path B IQ Calibration Success !
  939. [ 172.563982] pdmpriv->TxPowerTrackControl = 1
  940. [ 172.568596] rtl8192cu_hal_init in 565ms
  941. [ 172.570859] <=== rtw_ips_pwr_up.............. in 567ms
  942. [ 172.570973] ==> ips_leave.....LED(0x00028080)...
  943. [ 173.919148] survey done event(3d)
  944. [ 174.575050] ==>rtw_ps_processor .fw_state(8)
  945. [ 174.575056] ==>ips_enter cnts:5
  946. [ 174.575057] ===> rtw_ips_pwr_down...................
  947. [ 174.575389] ====> rtw_ips_dev_unload...
  948. [ 174.598737] usb_read_port_cancel
  949. [ 174.598975] usb_read_port_complete()-1290: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
  950. [ 174.599230] usb_read_port_complete()-1290: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
  951. [ 174.599473] usb_read_port_complete()-1290: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
  952. [ 174.599723] usb_read_port_complete()-1290: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
  953. [ 174.599746] usb_write_port_cancel
  954. [ 174.599767] ==> rtl8192cu_hal_deinit
  955. [ 174.599769] bkeepfwalive(0)
  956. [ 174.599770] card disble without HWSM...........
  957. [ 174.604736] <=== rtw_ips_pwr_down..................... in 29ms
  958. [ 214.961896] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio.
  959. [ 214.962051] wlan0: deauthenticating from d8:5d:4c:d5:07:be by local choice (reason=3)
  960. [ 214.962407] iwlwifi 0000:03:00.0: Not sending command - RF KILL
  961. [ 214.962415] wlan0: HW problem - can not stop rx aggregation for d8:5d:4c:d5:07:be tid 0
  962. [ 214.962450] iwlwifi 0000:03:00.0: Not sending command - RF KILL
  963. [ 214.962457] wlan0: failed to remove key (0, d8:5d:4c:d5:07:be) from hardware (-5)
  964. [ 214.962488] iwlwifi 0000:03:00.0: Not sending command - RF KILL
  965. [ 214.962499] iwlwifi 0000:03:00.0: Not sending command - RF KILL
  966. [ 214.962509] iwlwifi 0000:03:00.0: Not sending command - RF KILL
  967. [ 214.962520] iwlwifi 0000:03:00.0: Not sending command - RF KILL
  968. [ 214.962531] iwlwifi 0000:03:00.0: Not sending command - RF KILL
  969. [ 214.962547] iwlwifi 0000:03:00.0: Not sending command - RF KILL
  970. [ 214.962802] iwlwifi 0000:03:00.0: Not sending command - RF KILL
  971. [ 214.962810] wlan0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-5)
  972. [ 214.963507] cfg80211: Calling CRDA to update world regulatory domain
  973. [ 214.970345] iwlwifi 0000:03:00.0: Not sending command - RF KILL
  974. [ 214.974628] cfg80211: World regulatory domain updated:
  975. [ 214.974633] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  976. [ 214.974635] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  977. [ 214.974637] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  978. [ 214.974639] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  979. [ 214.974640] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  980. [ 214.974642] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  981. [ 215.070324] _rtw_pwr_wakeup call ips_leave....
  982. [ 215.070329] ==>ips_leave cnts:5
  983. [ 215.070331] ===> rtw_ips_pwr_up..............
  984. [ 215.070334] ===> ips_netdrv_open.........
  985. [ 215.078339] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
  986. [ 215.078345] FirmwareDownload92C accquire FW from embedded image
  987. [ 215.078346] fw_ver=v88, fw_subver=2, sig=0x88c0
  988. [ 215.103611] fw download ok!
  989. [ 215.103615] Set RF Chip ID to RF_6052 and RF type to 2.
  990. [ 215.203081] usb 4-2: USB disconnect, device number 3
  991. [ 215.473169] IQK:Start!!!
  992. [ 215.485057] Path A IQK Success!!
  993. [ 215.489802] Path B IQK Success!!
  994. [ 215.498432] Path A Rx IQK fail!!
  995. [ 215.501437] Path A Rx IQK fail!!
  996. [ 215.501443] Path A IQK Only Tx Success!!
  997. [ 215.505943] Path B IQK Success!!
  998. [ 215.518565] Path A IQK Success!!
  999. [ 215.523447] Path B IQK Success!!
  1000. [ 215.528325] IQK: final_candidate is 0
  1001. [ 215.528333] IQK: RegE94=fe RegE9C=3fb RegEA4=ff RegEAC=3ff RegEB4=102 RegEBC=11 RegEC4=fe RegECC=3fe
  1002. [ 215.528333] Path A IQ Calibration Success !
  1003. [ 215.530576] Path B IQ Calibration Success !
  1004. [ 215.640893] pdmpriv->TxPowerTrackControl = 1
  1005. [ 215.645508] rtl8192cu_hal_init in 575ms
  1006. [ 215.647775] <=== rtw_ips_pwr_up.............. in 577ms
  1007. [ 215.647878] ==> ips_leave.....LED(0x00028080)...
  1008. [ 215.647887] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  1009. [ 215.648514] -871x_drv - drv_close, bup=1
  1010. [ 215.658482] =>rtw_wx_set_essid
  1011. [ 215.658493] ssid=f2
  1012. \xffffffb71X\xffffffa3Z%]\x05\x17X\xffffffe9^\xffffffd4\xffffffab\xffffffab\xffffffb2\xffffffcd\xffffffc6\xffffff9b\xffffff9b\xffffffb4T\x11\x0e\xffffff82tA!=\xffffffdc\xffffff87\xffffff87, len=32
  1013. [ 215.658512] Set SSID under fw_state=0x00000008
  1014. [ 215.658519] rtw_select_and_join_from_scanned_queue: return _FAIL(candidate == NULL)
  1015. [ 215.658559] <=rtw_wx_set_essid, ret 0
  1016. [ 217.006064] survey done event(33)
  1017. [ 217.006082] rtw_select_and_join_from_scanned_queue: return _FAIL(candidate == NULL)
  1018. [ 217.006087] try_to_join, but select scanning queue fail, to_roaming:0
  1019. [ 219.037312] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
  1020. [ 219.043824] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
  1021. [ 219.051481] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
  1022. [ 219.167851] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1023. [ 219.168429] +871x_drv - drv_open, bup=1
  1024. [ 219.168433] -871x_drv - drv_open, bup=1
  1025. [ 219.168465] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
  1026. [ 219.207172] (2)871x_drv - drv_close, bup=1, hw_init_completed=1
  1027. [ 219.209045] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  1028. [ 219.214846] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
  1029. [ 219.215069] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  1030. [ 219.215679] -871x_drv - drv_close, bup=1
  1031. [ 219.215889] +871x_drv - drv_open, bup=1
  1032. [ 219.215901] -871x_drv - drv_open, bup=1
  1033. [ 219.215975] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
  1034. [ 219.216378] (2)871x_drv - drv_close, bup=1, hw_init_completed=1
  1035. [ 219.217669] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  1036. [ 219.223460] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
  1037. [ 219.223670] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  1038. [ 219.224547] -871x_drv - drv_close, bup=1
  1039. [ 219.224751] +871x_drv - drv_open, bup=1
  1040. [ 219.224763] -871x_drv - drv_open, bup=1
  1041. [ 219.224833] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
  1042. [ 219.224973] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
  1043. [ 219.224982] set_mode = IW_MODE_INFRA
  1044. [ 219.225288] =>rtw_wx_set_essid
  1045. [ 219.225295] ssid=p\xffffffe9>\xffffffa1A\xffffffe1\xfffffffcg>\x01~\xffffff97\xffffffea\xffffffdck\xffffff96\xffffff8f8\*\xffffffec\xffffffb0;\xfffffffb2\xffffffaf<T\xffffffec\x18\xffffffdb\, len=32
  1046. [ 219.225302] Set SSID under fw_state=0x00000008
  1047. [ 219.225310] <=rtw_wx_set_essid, ret 0
  1048. [ 219.225923] hw_var_set_opmode()-4221 mode = 2
  1049. [ 219.242661] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
  1050. [ 219.950111] usb 4-2: new full-speed USB device number 4 using uhci_hcd
  1051. [ 220.105327] usb 4-2: New USB device found, idVendor=0a5c, idProduct=2145
  1052. [ 220.105339] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  1053. [ 220.105346] usb 4-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II
  1054. [ 220.105352] usb 4-2: Manufacturer: Lenovo Computer Corp
  1055. [ 220.574114] survey done event(2a)
  1056. [ 220.574131] rtw_select_and_join_from_scanned_queue: return _FAIL(candidate == NULL)
  1057. [ 220.574137] try_to_join, but select scanning queue fail, to_roaming:0
  1058. [ 223.239041] ==>rtw_ps_processor .fw_state(8)
  1059. [ 223.239055] ==>ips_enter cnts:6
  1060. [ 223.239059] ===> rtw_ips_pwr_down...................
  1061. [ 223.239297] ====> rtw_ips_dev_unload...
  1062. [ 223.262944] usb_read_port_cancel
  1063. [ 223.263186] usb_read_port_complete()-1290: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
  1064. [ 223.264171] usb_read_port_complete()-1290: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
  1065. [ 223.264553] usb_read_port_complete()-1290: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
  1066. [ 223.264797] usb_read_port_complete()-1290: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
  1067. [ 223.264812] usb_write_port_cancel
  1068. [ 223.264830] ==> rtl8192cu_hal_deinit
  1069. [ 223.264831] bkeepfwalive(0)
  1070. [ 223.264832] card disble without HWSM...........
  1071. [ 223.270306] <=== rtw_ips_pwr_down..................... in 31ms
  1072. [ 227.632189] _rtw_pwr_wakeup call ips_leave....
  1073. [ 227.632196] ==>ips_leave cnts:6
  1074. [ 227.632197] ===> rtw_ips_pwr_up..............
  1075. [ 227.632201] ===> ips_netdrv_open.........
  1076. [ 227.636993] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
  1077. [ 227.636996] FirmwareDownload92C accquire FW from embedded image
  1078. [ 227.636998] fw_ver=v88, fw_subver=2, sig=0x88c0
  1079. [ 227.666504] fw download ok!
  1080. [ 227.666510] Set RF Chip ID to RF_6052 and RF type to 2.
  1081. [ 228.034082] IQK:Start!!!
  1082. [ 228.045844] Path A Rx IQK fail!!
  1083. [ 228.048701] Path A Rx IQK fail!!
  1084. [ 228.048708] Path A IQK Only Tx Success!!
  1085. [ 228.054203] Path B IQK Success!!
  1086. [ 228.063217] Path A IQK Success!!
  1087. [ 228.067965] Path B IQK Success!!
  1088. [ 228.080719] Path A Rx IQK fail!!
  1089. [ 228.083604] Path A IQK Success!!
  1090. [ 228.088482] Path B IQK Success!!
  1091. [ 228.093231] IQK: final_candidate is 1
  1092. [ 228.093239] IQK: RegE94=fe RegE9C=3fa RegEA4=100 RegEAC=3ff RegEB4=102 RegEBC=10 RegEC4=fd RegECC=3fd
  1093. [ 228.093239] Path A IQ Calibration Success !
  1094. [ 228.095609] Path B IQ Calibration Success !
  1095. [ 228.206919] pdmpriv->TxPowerTrackControl = 1
  1096. [ 228.211546] rtl8192cu_hal_init in 579ms
  1097. [ 228.213820] <=== rtw_ips_pwr_up.............. in 581ms
  1098. [ 228.213917] ==> ips_leave.....LED(0x00028080)...
  1099. [ 228.213927] IW_SCAN_THIS_ESSID, ssid=shiiit, len=6
  1100. [ 229.565099] survey done event(2b)
  1101. [ 229.567774] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
  1102. [ 229.567785] set_mode = IW_MODE_INFRA
  1103. [ 229.567809]
  1104. [ 229.567809] wpa_ie(length:22):
  1105. [ 229.567817] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
  1106. [ 229.567822] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
  1107. [ 229.567826] 0x00 0x0f 0xac 0x02 0x00 0x00 0x2e 0x73
  1108. [ 229.568843] hw_var_set_opmode()-4221 mode = 2
  1109. [ 229.569591] SetHwReg8192CU, 5117, RCR= 700060ca
  1110. [ 229.569624] =>rtw_wx_set_essid
  1111. [ 229.569630] ssid=shiiit, len=6
  1112. [ 229.569640] Set SSID under fw_state=0x00000008
  1113. [ 229.569649] [by_bssid:0][assoc_ssid:shiiit][to_roaming:0] new candidate: shiiit(d8:5d:4c:d5:07:be) rssi:-26
  1114. [ 229.569656] rtw_select_and_join_from_scanned_queue: candidate: shiiit(d8:5d:4c:d5:07:be, ch:6)
  1115. [ 229.569668] link to new AP
  1116. [ 229.569673] <=rtw_wx_set_essid, ret 0
  1117. [ 229.569686] Set BSSID under fw_state=0x00000088
  1118. [ 229.569966] set ch/bw before connected
  1119. [ 229.690974] link to new AP
  1120. [ 229.691001] issue_deauth to d8:5d:4c:d5:07:be
  1121. [ 229.991056] link_timer_hdl: auth timeout and try again
  1122. [ 230.292063] link_timer_hdl: auth timeout and try again
  1123. [ 230.593059] link_timer_hdl: auth timeout and try again
  1124. [ 230.894078] link_timer_hdl: auth timeout and try again
  1125. [ 231.195072] report_join_res(-1)
  1126. [ 231.196038] _rtw_join_timeout_handler, fw_state=8
  1127. [ 231.196435] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  1128. [ 231.197156] =>mlmeext_joinbss_event_callback
  1129. [ 231.197167] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
  1130. [ 232.647027] survey done event(26)
  1131. [ 232.649601] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
  1132. [ 232.649612] set_mode = IW_MODE_INFRA
  1133. [ 232.649697]
  1134. [ 232.649697] wpa_ie(length:22):
  1135. [ 232.649705] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
  1136. [ 232.649710] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
  1137. [ 232.649715] 0x00 0x0f 0xac 0x02 0x00 0x00 0xff 0xff
  1138. [ 232.650651] hw_var_set_opmode()-4221 mode = 2
  1139. [ 232.651386] SetHwReg8192CU, 5117, RCR= 700060ca
  1140. [ 232.651463] =>rtw_wx_set_essid
  1141. [ 232.651468] ssid=shiiit, len=6
  1142. [ 232.651480] Set SSID under fw_state=0x00000008
  1143. [ 232.651489] [by_bssid:0][assoc_ssid:shiiit][to_roaming:0] new candidate: shiiit(d8:5d:4c:d5:07:be) rssi:-28
  1144. [ 232.651497] rtw_select_and_join_from_scanned_queue: candidate: shiiit(d8:5d:4c:d5:07:be, ch:6)
  1145. [ 232.651510] link to new AP
  1146. [ 232.651515] <=rtw_wx_set_essid, ret 0
  1147. [ 232.651592] Set BSSID under fw_state=0x00000088
  1148. [ 232.651891] set ch/bw before connected
  1149. [ 232.776604] link to new AP
  1150. [ 232.776619] issue_deauth to d8:5d:4c:d5:07:be
  1151. [ 233.077073] link_timer_hdl: auth timeout and try again
  1152. [ 233.378053] link_timer_hdl: auth timeout and try again
  1153. [ 233.679067] link_timer_hdl: auth timeout and try again
  1154. [ 233.980068] link_timer_hdl: auth timeout and try again
  1155. [ 234.281087] report_join_res(-1)
  1156. [ 234.282035] _rtw_join_timeout_handler, fw_state=8
  1157. [ 234.282429] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  1158. [ 234.283090] =>mlmeext_joinbss_event_callback
  1159. [ 234.283103] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
  1160. [ 234.382620] IW_SCAN_THIS_ESSID, ssid=shiiit, len=6
  1161. [ 235.732931] survey done event(2c)
  1162. [ 235.734725] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
  1163. [ 235.734736] set_mode = IW_MODE_INFRA
  1164. [ 235.734758]
  1165. [ 235.734758] wpa_ie(length:22):
  1166. [ 235.734766] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
  1167. [ 235.734771] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
  1168. [ 235.734776] 0x00 0x0f 0xac 0x02 0x00 0x00 0x00 0x40
  1169. [ 235.735681] SetHwReg8192CU, 5117, RCR= 700060ca
  1170. [ 235.735712] =>rtw_wx_set_essid
  1171. [ 235.735717] ssid=shiiit, len=6
  1172. [ 235.735724] Set SSID under fw_state=0x00000008
  1173. [ 235.735733] [by_bssid:0][assoc_ssid:shiiit][to_roaming:0] new candidate: shiiit(d8:5d:4c:d5:07:be) rssi:-28
  1174. [ 235.735740] rtw_select_and_join_from_scanned_queue: candidate: shiiit(d8:5d:4c:d5:07:be, ch:6)
  1175. [ 235.735752] link to new AP
  1176. [ 235.735757] <=rtw_wx_set_essid, ret 0
  1177. [ 235.735768] Set BSSID under fw_state=0x00000088
  1178. [ 235.737672] hw_var_set_opmode()-4221 mode = 2
  1179. [ 235.738059] set ch/bw before connected
  1180. [ 235.810005] link to new AP
  1181. [ 235.810030] issue_deauth to d8:5d:4c:d5:07:be
  1182. [ 236.110030] link_timer_hdl: auth timeout and try again
  1183. [ 236.411072] link_timer_hdl: auth timeout and try again
  1184. [ 236.712052] link_timer_hdl: auth timeout and try again
  1185. [ 237.013060] link_timer_hdl: auth timeout and try again
  1186. [ 237.314083] report_join_res(-1)
  1187. [ 237.315021] _rtw_join_timeout_handler, fw_state=8
  1188. [ 237.315910] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  1189. [ 237.316708] =>mlmeext_joinbss_event_callback
  1190. [ 237.316722] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
  1191. [ 238.765946] survey done event(33)
  1192. [ 238.768075] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
  1193. [ 238.768086] set_mode = IW_MODE_INFRA
  1194. [ 238.768107]
  1195. [ 238.768107] wpa_ie(length:22):
  1196. [ 238.768114] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
  1197. [ 238.768119] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
  1198. [ 238.768124] 0x00 0x0f 0xac 0x02 0x00 0x00 0x2e 0x73
  1199. [ 238.768566] SetHwReg8192CU, 5117, RCR= 700060ca
  1200. [ 238.768687] =>rtw_wx_set_essid
  1201. [ 238.768693] ssid=shiiit, len=6
  1202. [ 238.768701] Set SSID under fw_state=0x00000008
  1203. [ 238.768710] [by_bssid:0][assoc_ssid:shiiit][to_roaming:0] new candidate: shiiit(d8:5d:4c:d5:07:be) rssi:-28
  1204. [ 238.768717] rtw_select_and_join_from_scanned_queue: candidate: shiiit(d8:5d:4c:d5:07:be, ch:6)
  1205. [ 238.768728] link to new AP
  1206. [ 238.768733] <=rtw_wx_set_essid, ret 0
  1207. [ 238.768792] Set BSSID under fw_state=0x00000088
  1208. [ 238.773049] hw_var_set_opmode()-4221 mode = 2
  1209. [ 238.773436] set ch/bw before connected
  1210. [ 238.888046] link to new AP
  1211. [ 238.888061] issue_deauth to d8:5d:4c:d5:07:be
  1212. [ 239.189078] link_timer_hdl: auth timeout and try again
  1213. [ 239.490071] link_timer_hdl: auth timeout and try again
  1214. [ 239.791065] link_timer_hdl: auth timeout and try again
  1215. [ 240.092089] link_timer_hdl: auth timeout and try again
  1216. [ 240.393099] report_join_res(-1)
  1217. [ 240.394027] _rtw_join_timeout_handler, fw_state=8
  1218. [ 240.394589] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  1219. [ 240.395269] =>mlmeext_joinbss_event_callback
  1220. [ 240.395281] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
  1221. [ 240.494600] IW_SCAN_THIS_ESSID, ssid=shiiit, len=6
  1222. [ 241.845248] survey done event(2a)
  1223. [ 241.846666] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
  1224. [ 241.846677] set_mode = IW_MODE_INFRA
  1225. [ 241.846701]
  1226. [ 241.846701] wpa_ie(length:22):
  1227. [ 241.846708] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
  1228. [ 241.846714] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
  1229. [ 241.846718] 0x00 0x0f 0xac 0x02 0x00 0x00 0x2e 0x73
  1230. [ 241.847996] hw_var_set_opmode()-4221 mode = 2
  1231. [ 241.848486] SetHwReg8192CU, 5117, RCR= 700060ca
  1232. [ 241.848518] =>rtw_wx_set_essid
  1233. [ 241.848522] ssid=shiiit, len=6
  1234. [ 241.848531] Set SSID under fw_state=0x00000008
  1235. [ 241.848540] [by_bssid:0][assoc_ssid:shiiit][to_roaming:0] new candidate: shiiit(d8:5d:4c:d5:07:be) rssi:-28
  1236. [ 241.848547] rtw_select_and_join_from_scanned_queue: candidate: shiiit(d8:5d:4c:d5:07:be, ch:6)
  1237. [ 241.848558] link to new AP
  1238. [ 241.848564] <=rtw_wx_set_essid, ret 0
  1239. [ 241.848576] Set BSSID under fw_state=0x00000088
  1240. [ 241.848982] set ch/bw before connected
  1241. [ 241.868922] link to new AP
  1242. [ 241.868943] issue_deauth to d8:5d:4c:d5:07:be
  1243. [ 242.169057] link_timer_hdl: auth timeout and try again
  1244. [ 242.470071] link_timer_hdl: auth timeout and try again
  1245. [ 242.771076] link_timer_hdl: auth timeout and try again
  1246. [ 243.072047] link_timer_hdl: auth timeout and try again
  1247. [ 243.373057] report_join_res(-1)
  1248. [ 243.374032] _rtw_join_timeout_handler, fw_state=8
  1249. [ 243.374613] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  1250. [ 243.375242] =>mlmeext_joinbss_event_callback
  1251. [ 243.375254] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
  1252. [ 244.824114] survey done event(2f)
  1253. [ 244.826036] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
  1254. [ 244.826047] set_mode = IW_MODE_INFRA
  1255. [ 244.826069]
  1256. [ 244.826069] wpa_ie(length:22):
  1257. [ 244.826076] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
  1258. [ 244.826081] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
  1259. [ 244.826086] 0x00 0x0f 0xac 0x02 0x00 0x00 0x00 0x00
  1260. [ 244.826469] SetHwReg8192CU, 5117, RCR= 700060ca
  1261. [ 244.826497] =>rtw_wx_set_essid
  1262. [ 244.826501] ssid=shiiit, len=6
  1263. [ 244.826508] Set SSID under fw_state=0x00000008
  1264. [ 244.826517] [by_bssid:0][assoc_ssid:shiiit][to_roaming:0] new candidate: shiiit(d8:5d:4c:d5:07:be) rssi:-62
  1265. [ 244.826524] rtw_select_and_join_from_scanned_queue: candidate: shiiit(d8:5d:4c:d5:07:be, ch:6)
  1266. [ 244.826536] link to new AP
  1267. [ 244.826541] <=rtw_wx_set_essid, ret 0
  1268. [ 244.826553] Set BSSID under fw_state=0x00000088
  1269. [ 244.827719] hw_var_set_opmode()-4221 mode = 2
  1270. [ 244.828224] set ch/bw before connected
  1271. [ 244.942977] link to new AP
  1272. [ 244.943002] issue_deauth to d8:5d:4c:d5:07:be
  1273. [ 245.243036] link_timer_hdl: auth timeout and try again
  1274. [ 245.544089] link_timer_hdl: auth timeout and try again
  1275. [ 245.845063] link_timer_hdl: auth timeout and try again
  1276. [ 246.146040] link_timer_hdl: auth timeout and try again
  1277. [ 246.447094] report_join_res(-1)
  1278. [ 246.448036] _rtw_join_timeout_handler, fw_state=8
  1279. [ 246.448401] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  1280. [ 246.449063] =>mlmeext_joinbss_event_callback
  1281. [ 246.449079] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
  1282. [ 246.548610] IW_SCAN_THIS_ESSID, ssid=shiiit, len=6
  1283. [ 247.899025] survey done event(21)
  1284. [ 247.900476] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
  1285. [ 247.900487] set_mode = IW_MODE_INFRA
  1286. [ 247.900521]
  1287. [ 247.900521] wpa_ie(length:22):
  1288. [ 247.900529] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
  1289. [ 247.900534] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
  1290. [ 247.900539] 0x00 0x0f 0xac 0x02 0x00 0x00 0xad 0xde
  1291. [ 247.902250] hw_var_set_opmode()-4221 mode = 2
  1292. [ 247.903398] SetHwReg8192CU, 5117, RCR= 700060ca
  1293. [ 247.903435] =>rtw_wx_set_essid
  1294. [ 247.903440] ssid=shiiit, len=6
  1295. [ 247.903453] Set SSID under fw_state=0x00000008
  1296. [ 247.903462] [by_bssid:0][assoc_ssid:shiiit][to_roaming:0] new candidate: shiiit(d8:5d:4c:d5:07:be) rssi:-32
  1297. [ 247.903470] rtw_select_and_join_from_scanned_queue: candidate: shiiit(d8:5d:4c:d5:07:be, ch:6)
  1298. [ 247.903482] link to new AP
  1299. [ 247.903490] <=rtw_wx_set_essid, ret 0
  1300. [ 247.903505] Set BSSID under fw_state=0x00000088
  1301. [ 247.903623] set ch/bw before connected
  1302. [ 248.103916] link to new AP
  1303. [ 248.103943] issue_deauth to d8:5d:4c:d5:07:be
  1304. [ 248.404056] link_timer_hdl: auth timeout and try again
  1305. [ 248.705066] link_timer_hdl: auth timeout and try again
  1306. [ 249.006067] link_timer_hdl: auth timeout and try again
  1307. [ 249.307072] link_timer_hdl: auth timeout and try again
  1308. [ 249.608068] report_join_res(-1)
  1309. [ 249.609029] _rtw_join_timeout_handler, fw_state=8
  1310. [ 249.609586] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  1311. [ 249.610246] =>mlmeext_joinbss_event_callback
  1312. [ 249.610259] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
  1313. [ 251.058977] survey done event(30)
  1314. [ 251.060836] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
  1315. [ 251.060846] set_mode = IW_MODE_INFRA
  1316. [ 251.061228]
  1317. [ 251.061228] wpa_ie(length:22):
  1318. [ 251.061237] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
  1319. [ 251.061242] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
  1320. [ 251.061247] 0x00 0x0f 0xac 0x02 0x00 0x00 0xff 0xff
  1321. [ 251.061833] hw_var_set_opmode()-4221 mode = 2
  1322. [ 251.065537] SetHwReg8192CU, 5117, RCR= 700060ca
  1323. [ 251.065554] =>rtw_wx_set_essid
  1324. [ 251.065555] ssid=shiiit, len=6
  1325. [ 251.065560] Set SSID under fw_state=0x00000008
  1326. [ 251.065563] [by_bssid:0][assoc_ssid:shiiit][to_roaming:0] new candidate: shiiit(d8:5d:4c:d5:07:be) rssi:-32
  1327. [ 251.065566] rtw_select_and_join_from_scanned_queue: candidate: shiiit(d8:5d:4c:d5:07:be, ch:6)
  1328. [ 251.065571] link to new AP
  1329. [ 251.065573] <=rtw_wx_set_essid, ret 0
  1330. [ 251.065578] Set BSSID under fw_state=0x00000088
  1331. [ 251.066196] set ch/bw before connected
  1332. [ 251.284106] link to new AP
  1333. [ 251.284130] issue_deauth to d8:5d:4c:d5:07:be
  1334. [ 251.585091] link_timer_hdl: auth timeout and try again
  1335. [ 251.886093] link_timer_hdl: auth timeout and try again
  1336. [ 252.187070] link_timer_hdl: auth timeout and try again
  1337. [ 252.488059] link_timer_hdl: auth timeout and try again
  1338. [ 252.789094] report_join_res(-1)
  1339. [ 252.790036] _rtw_join_timeout_handler, fw_state=8
  1340. [ 252.790419] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  1341. [ 252.791091] =>mlmeext_joinbss_event_callback
  1342. [ 252.791102] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
  1343. [ 252.890632] IW_SCAN_THIS_ESSID, ssid=shiiit, len=6
  1344. [ 254.247426] survey done event(30)
  1345. [ 256.267111] ==>rtw_ps_processor .fw_state(8)
  1346. [ 256.267122] ==>ips_enter cnts:7
  1347. [ 256.267126] ===> rtw_ips_pwr_down...................
  1348. [ 256.267464] ====> rtw_ips_dev_unload...
  1349. [ 256.290832] usb_read_port_cancel
  1350. [ 256.291059] usb_read_port_complete()-1290: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
  1351. [ 256.291316] usb_read_port_complete()-1290: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
  1352. [ 256.291583] usb_read_port_complete()-1290: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
  1353. [ 256.291829] usb_read_port_complete()-1290: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
  1354. [ 256.291842] usb_write_port_cancel
  1355. [ 256.291858] ==> rtl8192cu_hal_deinit
  1356. [ 256.291859] bkeepfwalive(0)
  1357. [ 256.291861] card disble without HWSM...........
  1358. [ 256.297333] <=== rtw_ips_pwr_down..................... in 30ms
  1359. [ 260.134739] _rtw_pwr_wakeup call ips_leave....
  1360. [ 260.134745] ==>ips_leave cnts:7
  1361. [ 260.134746] ===> rtw_ips_pwr_up..............
  1362. [ 260.134750] ===> ips_netdrv_open.........
  1363. [ 260.139499] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
  1364. [ 260.139502] FirmwareDownload92C accquire FW from embedded image
  1365. [ 260.139504] fw_ver=v88, fw_subver=2, sig=0x88c0
  1366. [ 260.164753] fw download ok!
  1367. [ 260.164758] Set RF Chip ID to RF_6052 and RF type to 2.
  1368. [ 260.536454] IQK:Start!!!
  1369. [ 260.548208] Path A IQK Success!!
  1370. [ 260.552955] Path B IQK Success!!
  1371. [ 260.561463] Path A IQK Success!!
  1372. [ 260.566212] Path B IQK Success!!
  1373. [ 260.570972] IQK: final_candidate is 0
  1374. [ 260.570981] IQK: RegE94=fe RegE9C=3fa RegEA4=ff RegEAC=3ff RegEB4=102 RegEBC=10 RegEC4=fd RegECC=3fe
  1375. [ 260.570981] Path A IQ Calibration Success !
  1376. [ 260.573099] Path B IQ Calibration Success !
  1377. [ 260.682903] pdmpriv->TxPowerTrackControl = 1
  1378. [ 260.687657] rtl8192cu_hal_init in 553ms
  1379. [ 260.689796] <=== rtw_ips_pwr_up.............. in 555ms
  1380. [ 260.689938] ==> ips_leave.....LED(0x00028080)...
  1381. [ 262.039708] survey done event(26)
  1382. [ 262.041849] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
  1383. [ 262.041860] set_mode = IW_MODE_INFRA
  1384. [ 262.042105]
  1385. [ 262.042105] wpa_ie(length:22):
  1386. [ 262.042114] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
  1387. [ 262.042119] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
  1388. [ 262.042124] 0x00 0x0f 0xac 0x02 0x00 0x00 0xad 0xde
  1389. [ 262.042701] hw_var_set_opmode()-4221 mode = 2
  1390. [ 262.043707] SetHwReg8192CU, 5117, RCR= 700060ca
  1391. [ 262.043792] =>rtw_wx_set_essid
  1392. [ 262.043798] ssid=shiiit, len=6
  1393. [ 262.043809] Set SSID under fw_state=0x00000008
  1394. [ 262.043818] [by_bssid:0][assoc_ssid:shiiit][to_roaming:0] new candidate: shiiit(d8:5d:4c:d5:07:be) rssi:-31
  1395. [ 262.043826] rtw_select_and_join_from_scanned_queue: candidate: shiiit(d8:5d:4c:d5:07:be, ch:6)
  1396. [ 262.043839] link to new AP
  1397. [ 262.043845] <=rtw_wx_set_essid, ret 0
  1398. [ 262.043924] Set BSSID under fw_state=0x00000088
  1399. [ 262.044446] set ch/bw before connected
  1400. [ 262.344907] link to new AP
  1401. [ 262.344935] issue_deauth to d8:5d:4c:d5:07:be
  1402. [ 262.645048] link_timer_hdl: auth timeout and try again
  1403. [ 262.946023] link_timer_hdl: auth timeout and try again
  1404. [ 263.247053] link_timer_hdl: auth timeout and try again
  1405. [ 263.548047] link_timer_hdl: auth timeout and try again
  1406. [ 263.849057] report_join_res(-1)
  1407. [ 263.850041] _rtw_join_timeout_handler, fw_state=8
  1408. [ 263.850108] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  1409. [ 263.851250] =>mlmeext_joinbss_event_callback
  1410. [ 263.851264] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
  1411. [ 263.950689] IW_SCAN_THIS_ESSID, ssid=shiiit, len=6
  1412. [ 265.299974] survey done event(2a)
  1413. [ 265.301787] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
  1414. [ 265.301798] set_mode = IW_MODE_INFRA
  1415. [ 265.301819]
  1416. [ 265.301819] wpa_ie(length:22):
  1417. [ 265.301827] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
  1418. [ 265.301832] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
  1419. [ 265.301837] 0x00 0x0f 0xac 0x02 0x00 0x00 0xad 0xde
  1420. [ 265.303336] SetHwReg8192CU, 5117, RCR= 700060ca
  1421. [ 265.303368] =>rtw_wx_set_essid
  1422. [ 265.303373] ssid=shiiit, len=6
  1423. [ 265.303381] Set SSID under fw_state=0x00000008
  1424. [ 265.303390] [by_bssid:0][assoc_ssid:shiiit][to_roaming:0] new candidate: shiiit(d8:5d:4c:d5:07:be) rssi:-30
  1425. [ 265.303399] rtw_select_and_join_from_scanned_queue: candidate: shiiit(d8:5d:4c:d5:07:be, ch:6)
  1426. [ 265.303411] link to new AP
  1427. [ 265.303416] <=rtw_wx_set_essid, ret 0
  1428. [ 265.303427] Set BSSID under fw_state=0x00000088
  1429. [ 265.304320] hw_var_set_opmode()-4221 mode = 2
  1430. [ 265.304700] set ch/bw before connected
  1431. [ 265.315962] link to new AP
  1432. [ 265.315972] issue_deauth to d8:5d:4c:d5:07:be
  1433. [ 265.616048] link_timer_hdl: auth timeout and try again
  1434. [ 265.917096] link_timer_hdl: auth timeout and try again
  1435. [ 266.218061] link_timer_hdl: auth timeout and try again
  1436. [ 266.519075] link_timer_hdl: auth timeout and try again
  1437. [ 266.820073] report_join_res(-1)
  1438. [ 266.821047] _rtw_join_timeout_handler, fw_state=8
  1439. [ 266.821332] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  1440. [ 266.821970] =>mlmeext_joinbss_event_callback
  1441. [ 266.821984] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
  1442. [ 268.271821] survey done event(29)
  1443. [ 268.273800] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
  1444. [ 268.273811] set_mode = IW_MODE_INFRA
  1445. [ 268.273833]
  1446. [ 268.273833] wpa_ie(length:22):
  1447. [ 268.273841] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
  1448. [ 268.273846] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
  1449. [ 268.273851] 0x00 0x0f 0xac 0x02 0x00 0x00 0xad 0xde
  1450. [ 268.275702] SetHwReg8192CU, 5117, RCR= 700060ca
  1451. [ 268.275737] =>rtw_wx_set_essid
  1452. [ 268.275742] ssid=shiiit, len=6
  1453. [ 268.275751] Set SSID under fw_state=0x00000008
  1454. [ 268.275760] [by_bssid:0][assoc_ssid:shiiit][to_roaming:0] new candidate: shiiit(d8:5d:4c:d5:07:be) rssi:-28
  1455. [ 268.275767] rtw_select_and_join_from_scanned_queue: candidate: shiiit(d8:5d:4c:d5:07:be, ch:6)
  1456. [ 268.275780] link to new AP
  1457. [ 268.275785] <=rtw_wx_set_essid, ret 0
  1458. [ 268.275797] Set BSSID under fw_state=0x00000088
  1459. [ 268.276690] hw_var_set_opmode()-4221 mode = 2
  1460. [ 268.277098] set ch/bw before connected
  1461. [ 268.492109] link to new AP
  1462. [ 268.492135] issue_deauth to d8:5d:4c:d5:07:be
  1463. [ 268.793049] link_timer_hdl: auth timeout and try again
  1464. [ 269.094052] link_timer_hdl: auth timeout and try again
  1465. [ 269.395067] link_timer_hdl: auth timeout and try again
  1466. [ 269.696056] link_timer_hdl: auth timeout and try again
  1467. [ 269.997060] report_join_res(-1)
  1468. [ 269.998029] _rtw_join_timeout_handler, fw_state=8
  1469. [ 269.998585] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  1470. [ 269.999195] =>mlmeext_joinbss_event_callback
  1471. [ 269.999207] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
  1472. [ 270.098610] IW_SCAN_THIS_ESSID, ssid=shiiit, len=6
  1473. [ 271.448048] survey done event(32)
  1474. [ 271.451083] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
  1475. [ 271.451095] set_mode = IW_MODE_INFRA
  1476. [ 271.451117]
  1477. [ 271.451117] wpa_ie(length:22):
  1478. [ 271.451125] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
  1479. [ 271.451130] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
  1480. [ 271.451135] 0x00 0x0f 0xac 0x02 0x00 0x00 0x00 0x00
  1481. [ 271.451905] hw_var_set_opmode()-4221 mode = 2
  1482. [ 271.452901] SetHwReg8192CU, 5117, RCR= 700060ca
  1483. [ 271.453242] =>rtw_wx_set_essid
  1484. [ 271.453248] ssid=shiiit, len=6
  1485. [ 271.453267] Set SSID under fw_state=0x00000008
  1486. [ 271.453277] [by_bssid:0][assoc_ssid:shiiit][to_roaming:0] new candidate: shiiit(d8:5d:4c:d5:07:be) rssi:-31
  1487. [ 271.453284] rtw_select_and_join_from_scanned_queue: candidate: shiiit(d8:5d:4c:d5:07:be, ch:6)
  1488. [ 271.453295] link to new AP
  1489. [ 271.453317] <=rtw_wx_set_essid, ret 0
  1490. [ 271.453396] set ch/bw before connected
  1491. [ 271.453415] Set BSSID under fw_state=0x00000088
  1492. [ 271.565860] link to new AP
  1493. [ 271.565872] issue_deauth to d8:5d:4c:d5:07:be
  1494. [ 271.866054] link_timer_hdl: auth timeout and try again
  1495. [ 272.167040] link_timer_hdl: auth timeout and try again
  1496. [ 272.468061] link_timer_hdl: auth timeout and try again
  1497. [ 272.769075] link_timer_hdl: auth timeout and try again
  1498. [ 273.070094] report_join_res(-1)
  1499. [ 273.071033] _rtw_join_timeout_handler, fw_state=8
  1500. [ 273.071416] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  1501. [ 273.072219] =>mlmeext_joinbss_event_callback
  1502. [ 273.072232] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
  1503. [ 274.521947] survey done event(29)
  1504. [ 274.523643] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
  1505. [ 274.523654] set_mode = IW_MODE_INFRA
  1506. [ 274.523674]
  1507. [ 274.523674] wpa_ie(length:22):
  1508. [ 274.523682] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
  1509. [ 274.523687] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
  1510. [ 274.523692] 0x00 0x0f 0xac 0x02 0x00 0x00 0xad 0xde
  1511. [ 274.526828] SetHwReg8192CU, 5117, RCR= 700060ca
  1512. [ 274.526866] =>rtw_wx_set_essid
  1513. [ 274.526871] ssid=shiiit, len=6
  1514. [ 274.526879] Set SSID under fw_state=0x00000008
  1515. [ 274.526888] [by_bssid:0][assoc_ssid:shiiit][to_roaming:0] new candidate: shiiit(d8:5d:4c:d5:07:be) rssi:-26
  1516. [ 274.526896] rtw_select_and_join_from_scanned_queue: candidate: shiiit(d8:5d:4c:d5:07:be, ch:6)
  1517. [ 274.526909] link to new AP
  1518. [ 274.526914] <=rtw_wx_set_essid, ret 0
  1519. [ 274.526925] Set BSSID under fw_state=0x00000088
  1520. [ 274.527933] hw_var_set_opmode()-4221 mode = 2
  1521. [ 274.528812] set ch/bw before connected
  1522. [ 274.639195] link to new AP
  1523. [ 274.639221] issue_deauth to d8:5d:4c:d5:07:be
  1524. [ 274.940062] link_timer_hdl: auth timeout and try again
  1525. [ 275.241062] link_timer_hdl: auth timeout and try again
  1526. [ 275.542040] link_timer_hdl: auth timeout and try again
  1527. [ 275.843056] link_timer_hdl: auth timeout and try again
  1528. [ 276.144065] report_join_res(-1)
  1529. [ 276.145029] _rtw_join_timeout_handler, fw_state=8
  1530. [ 276.145596] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  1531. [ 276.146254] =>mlmeext_joinbss_event_callback
  1532. [ 276.146265] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
  1533. [ 276.245475] IW_SCAN_THIS_ESSID, ssid=shiiit, len=6
  1534. [ 277.593977] survey done event(2e)
  1535. [ 278.846677] usb 2-1: USB disconnect, device number 2
  1536. [ 278.847122] ###=> usb_read_port_complete => urb status(-108)
  1537. [ 278.847150] usb_read_port_complete()-1290: RX Warning! bDriverStopped(1) OR bSurpriseRemoved(0) bReadPortCancel(0)
  1538. [ 278.847171] usb_read_port_complete()-1290: RX Warning! bDriverStopped(1) OR bSurpriseRemoved(0) bReadPortCancel(0)
  1539. [ 278.847190] usb_read_port_complete()-1290: RX Warning! bDriverStopped(1) OR bSurpriseRemoved(0) bReadPortCancel(0)
  1540. [ 278.847230] +rtw_dev_remove
  1541. [ 278.847238] rtw_pm_set_ips IPS_NONE
  1542. [ 278.847246] rtw_sta_flush(wlan1)
  1543. [ 278.847284] (2)871x_drv - drv_close, bup=1, hw_init_completed=1
  1544. [ 278.847299] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  1545. [ 278.847340] rtw_p2p_enable: bDriverStopped=1, bup=1, hw_init_completed=1
  1546. [ 278.847345] -871x_drv - drv_close, bup=1
  1547. [ 278.850835] ###> rtw_cmd_thread break.................
  1548. [ 278.854061] ===> rtw_dev_unload
  1549. [ 278.854065] usb_read_port_cancel
  1550. [ 278.854069] usb_write_port_cancel
  1551. [ 278.854085] <=== rtw_dev_unload
  1552. [ 278.854087] rtw_usb_if1_deinit, hw_init_completed=1
  1553. [ 278.854180] free_recv_skb_queue not empty, 4
  1554. [ 278.854185] =====> rtl8192c_free_hal_data =====
  1555. [ 278.854187] <===== rtl8192c_free_hal_data =====
  1556. [ 278.854197] -r871xu_dev_remove, done
  1557. [ 281.206146] usb 2-1: new high-speed USB device number 3 using ehci-pci
  1558. [ 281.322032] usb 2-1: New USB device found, idVendor=2357, idProduct=0100
  1559. [ 281.322042] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  1560. [ 281.322049] usb 2-1: Product: 802.11n WLAN Adapter
  1561. [ 281.322055] usb 2-1: Manufacturer: Realtek
  1562. [ 281.322061] usb 2-1: SerialNumber: 00e04c000001
  1563. [ 281.323269]
  1564. [ 281.323269] usb_endpoint_descriptor(0):
  1565. [ 281.323277] bLength=7
  1566. [ 281.323281] bDescriptorType=5
  1567. [ 281.323284] bEndpointAddress=81
  1568. [ 281.323287] wMaxPacketSize=200
  1569. [ 281.323290] bInterval=0
  1570. [ 281.323293] RT_usb_endpoint_is_bulk_in = 1
  1571. [ 281.323296]
  1572. [ 281.323296] usb_endpoint_descriptor(1):
  1573. [ 281.323300] bLength=7
  1574. [ 281.323303] bDescriptorType=5
  1575. [ 281.323306] bEndpointAddress=2
  1576. [ 281.323309] wMaxPacketSize=200
  1577. [ 281.323312] bInterval=0
  1578. [ 281.323315] RT_usb_endpoint_is_bulk_out = 2
  1579. [ 281.323318]
  1580. [ 281.323318] usb_endpoint_descriptor(2):
  1581. [ 281.323322] bLength=7
  1582. [ 281.323325] bDescriptorType=5
  1583. [ 281.323328] bEndpointAddress=3
  1584. [ 281.323331] wMaxPacketSize=200
  1585. [ 281.323334] bInterval=0
  1586. [ 281.323337] RT_usb_endpoint_is_bulk_out = 3
  1587. [ 281.323340]
  1588. [ 281.323340] usb_endpoint_descriptor(3):
  1589. [ 281.323344] bLength=7
  1590. [ 281.323347] bDescriptorType=5
  1591. [ 281.323350] bEndpointAddress=84
  1592. [ 281.323353] wMaxPacketSize=40
  1593. [ 281.323356] bInterval=1
  1594. [ 281.323359] RT_usb_endpoint_is_int_in = 4, Interval = 1
  1595. [ 281.323363] nr_endpoint=4, in_num=2, out_num=2
  1596. [ 281.323363]
  1597. [ 281.323367] USB_SPEED_HIGH
  1598. [ 281.323390] CHIP TYPE: RTL8188C_8192C
  1599. [ 281.323411] register rtw_netdev_ops to netdev_ops
  1600. [ 281.323418] rtw_handle_dualmac(): pbuddy_padapter == NULL, Set pbuddy_padapter
  1601. [ 281.323628] Chip Version ID: VERSION_NORMAL_TSMC_CHIP_92C.
  1602. [ 281.323632] RF_Type is 2!!
  1603. [ 281.324021] EEPROM type is E-FUSE
  1604. [ 281.324028] ====> ReadAdapterInfo8192C
  1605. [ 281.324154] Boot from EFUSE, Autoload OK !
  1606. [ 281.458450] EEPROMVID = 0x2357
  1607. [ 281.458457] EEPROMPID = 0x0100
  1608. [ 281.458460] EEPROMCustomerID : 0x00
  1609. [ 281.458463] EEPROMSubCustomerID: 0x00
  1610. [ 281.458466] RT_CustomerID: 0x00
  1611. [ 281.458472] _ReadMACAddress MAC Address from EFUSE = f8:1a:67:09:78:c3
  1612. [ 281.458477] EEPROMRegulatory = 0x0
  1613. [ 281.458480] _ReadBoardType(0)
  1614. [ 281.458484] BT Coexistance = disable
  1615. [ 281.458487] mlmepriv.ChannelPlan = 0x02
  1616. [ 281.458492] _ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(0)
  1617. [ 281.458495] ### PS params=> power_mgnt(1),usbss_enable(0) ###
  1618. [ 281.458499] ### AntDivCfg(0)
  1619. [ 281.458502] readAdapterInfo_8192CU(): REPLACEMENT = 1
  1620. [ 281.458506] <==== ReadAdapterInfo8192C in 134 ms
  1621. [ 281.458992] rtw_macaddr_cfg MAC Address = f8:1a:67:09:78:c3
  1622. [ 281.458998] MAC Address from pnetdev->dev_addr= f8:1a:67:09:78:c3
  1623. [ 281.460044] bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
  1624. [ 281.480288] rtw_wx_set_scan: bDriverStopped=1, bup=0, hw_init_completed=0
  1625. [ 281.480733] +871x_drv - drv_open, bup=0
  1626. [ 281.487950] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
  1627. [ 281.487955] FirmwareDownload92C accquire FW from embedded image
  1628. [ 281.487957] fw_ver=v88, fw_subver=2, sig=0x88c0
  1629. [ 281.514522] fw download ok!
  1630. [ 281.514528] Set RF Chip ID to RF_6052 and RF type to 2.
  1631. [ 281.878155] IQK:Start!!!
  1632. [ 281.889925] Path A Rx IQK fail!!
  1633. [ 281.892792] Path A Rx IQK fail!!
  1634. [ 281.892798] Path A IQK Only Tx Success!!
  1635. [ 281.897305] Path B IQK Success!!
  1636. [ 281.905791] Path A Rx IQK fail!!
  1637. [ 281.908832] Path A IQK Success!!
  1638. [ 281.913562] Path B IQK Success!!
  1639. [ 281.926183] Path A IQK Success!!
  1640. [ 281.931059] Path B IQK Success!!
  1641. [ 281.935816] IQK: final_candidate is 1
  1642. [ 281.935824] IQK: RegE94=fe RegE9C=3fa RegEA4=100 RegEAC=0 RegEB4=102 RegEBC=10 RegEC4=fe RegECC=3fe
  1643. [ 281.935824] Path A IQ Calibration Success !
  1644. [ 281.937936] Path B IQ Calibration Success !
  1645. [ 282.047871] pdmpriv->TxPowerTrackControl = 1
  1646. [ 282.052494] rtl8192cu_hal_init in 572ms
  1647. [ 282.054744] MAC Address = f8:1a:67:09:78:c3
  1648. [ 282.059639] -871x_drv - drv_open, bup=1
  1649. [ 282.059786] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
  1650. [ 282.060910] (2)871x_drv - drv_close, bup=1, hw_init_completed=1
  1651. [ 282.062130] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  1652. [ 282.067914] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
  1653. [ 282.068381] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  1654. [ 282.069019] -871x_drv - drv_close, bup=1
  1655. [ 282.069390] set_mode = IW_MODE_INFRA
  1656. [ 282.069825] +871x_drv - drv_open, bup=1
  1657. [ 282.069837] -871x_drv - drv_open, bup=1
  1658. [ 282.069926] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
  1659. [ 282.070380] hw_var_set_opmode()-4221 mode = 2
  1660. [ 282.074808] (2)871x_drv - drv_close, bup=1, hw_init_completed=1
  1661. [ 282.076384] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  1662. [ 282.082244] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
  1663. [ 282.082518] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  1664. [ 282.083509] -871x_drv - drv_close, bup=1
  1665. [ 282.083769] +871x_drv - drv_open, bup=1
  1666. [ 282.083780] -871x_drv - drv_open, bup=1
  1667. [ 282.083849] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
  1668. [ 282.084302] (2)871x_drv - drv_close, bup=1, hw_init_completed=1
  1669. [ 282.085510] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  1670. [ 282.091301] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
  1671. [ 282.091528] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  1672. [ 282.092222] -871x_drv - drv_close, bup=1
  1673. [ 282.092476] +871x_drv - drv_open, bup=1
  1674. [ 282.092503] -871x_drv - drv_open, bup=1
  1675. [ 282.092572] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
  1676. [ 282.092745] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
  1677. [ 282.092755] set_mode = IW_MODE_INFRA
  1678. [ 282.092923] =>rtw_wx_set_essid
  1679. [ 282.092929] ssid=\x05\xffffffef\xfffffff7, len=32
  1680. [ 282.092935] Set SSID under fw_state=0x00000008
  1681. [ 282.092944] <=rtw_wx_set_essid, ret 0
  1682. [ 282.093494] hw_var_set_opmode()-4221 mode = 2
  1683. [ 282.105618] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
  1684. [ 283.442063] survey done event(2b)
  1685. [ 283.442080] rtw_select_and_join_from_scanned_queue: return _FAIL(candidate == NULL)
  1686. [ 283.442086] try_to_join, but select scanning queue fail, to_roaming:0
  1687. [ 286.106810] ==>rtw_ps_processor .fw_state(8)
  1688. [ 286.106820] ==>ips_enter cnts:1
  1689. [ 286.106824] ===> rtw_ips_pwr_down...................
  1690. [ 286.107036] ====> rtw_ips_dev_unload...
  1691. [ 286.131027] usb_read_port_cancel
  1692. [ 286.131282] usb_read_port_complete()-1290: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
  1693. [ 286.131519] usb_read_port_complete()-1290: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
  1694. [ 286.131773] usb_read_port_complete()-1290: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
  1695. [ 286.132023] usb_read_port_complete()-1290: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
  1696. [ 286.132113] usb_write_port_cancel
  1697. [ 286.132131] ==> rtl8192cu_hal_deinit
  1698. [ 286.132132] bkeepfwalive(0)
  1699. [ 286.132133] card disble without HWSM...........
  1700. [ 286.137151] <=== rtw_ips_pwr_down..................... in 31ms
  1701. [ 297.244145] _rtw_pwr_wakeup call ips_leave....
  1702. [ 297.244151] ==>ips_leave cnts:1
  1703. [ 297.244152] ===> rtw_ips_pwr_up..............
  1704. [ 297.244156] ===> ips_netdrv_open.........
  1705. [ 297.249091] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
  1706. [ 297.249100] FirmwareDownload92C accquire FW from embedded image
  1707. [ 297.249102] fw_ver=v88, fw_subver=2, sig=0x88c0
  1708. [ 297.277093] fw download ok!
  1709. [ 297.277099] Set RF Chip ID to RF_6052 and RF type to 2.
  1710. [ 297.647172] IQK:Start!!!
  1711. [ 297.658924] Path A Rx IQK fail!!
  1712. [ 297.661801] Path A Rx IQK fail!!
  1713. [ 297.661807] Path A IQK Only Tx Success!!
  1714. [ 297.667429] Path B IQK Success!!
  1715. [ 297.675931] Path A Rx IQK fail!!
  1716. [ 297.678800] Path A Rx IQK fail!!
  1717. [ 297.678807] Path A IQK Only Tx Success!!
  1718. [ 297.683321] Path B IQK Success!!
  1719. [ 297.688067] IQK: final_candidate is 0
  1720. [ 297.688076] IQK: RegE94=fe RegE9C=3fa RegEA4=0 RegEAC=0 RegEB4=102 RegEBC=f RegEC4=fd RegECC=3fd
  1721. [ 297.688076] Path A IQ Calibration Success !
  1722. [ 297.689560] _PHY_PathAFillIQKMatrix only Tx OK
  1723. [ 297.689566] Path B IQ Calibration Success !
  1724. [ 297.799873] pdmpriv->TxPowerTrackControl = 1
  1725. [ 297.804496] rtl8192cu_hal_init in 560ms
  1726. [ 297.806902] <=== rtw_ips_pwr_up.............. in 562ms
  1727. [ 297.806997] ==> ips_leave.....LED(0x00028080)...
  1728. [ 297.807025] IW_SCAN_THIS_ESSID, ssid=shiiit, len=6
  1729. [ 299.155051] survey done event(3f)
  1730. [ 299.158913] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
  1731. [ 299.158924] set_mode = IW_MODE_INFRA
  1732. [ 299.158947]
  1733. [ 299.158947] wpa_ie(length:22):
  1734. [ 299.158955] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
  1735. [ 299.158960] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
  1736. [ 299.158965] 0x00 0x0f 0xac 0x02 0x00 0x00 0xff 0xff
  1737. [ 299.159298] SetHwReg8192CU, 5117, RCR= 700060ca
  1738. [ 299.159411] =>rtw_wx_set_essid
  1739. [ 299.159417] ssid=shiiit, len=6
  1740. [ 299.159424] Set SSID under fw_state=0x00000008
  1741. [ 299.159433] [by_bssid:0][assoc_ssid:shiiit][to_roaming:0] new candidate: shiiit(d8:5d:4c:d5:07:be) rssi:-29
  1742. [ 299.159441] rtw_select_and_join_from_scanned_queue: candidate: shiiit(d8:5d:4c:d5:07:be, ch:6)
  1743. [ 299.159452] link to new AP
  1744. [ 299.159457] <=rtw_wx_set_essid, ret 0
  1745. [ 299.159520] Set BSSID under fw_state=0x00000088
  1746. [ 299.161789] hw_var_set_opmode()-4221 mode = 2
  1747. [ 299.162287] set ch/bw before connected
  1748. [ 299.330560] link to new AP
  1749. [ 299.330586] issue_deauth to d8:5d:4c:d5:07:be
  1750. [ 299.631055] link_timer_hdl: auth timeout and try again
  1751. [ 299.932073] link_timer_hdl: auth timeout and try again
  1752. [ 300.233067] link_timer_hdl: auth timeout and try again
  1753. [ 300.534031] link_timer_hdl: auth timeout and try again
  1754. [ 300.835078] report_join_res(-1)
  1755. [ 300.836018] _rtw_join_timeout_handler, fw_state=8
  1756. [ 300.836331] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  1757. [ 300.837145] =>mlmeext_joinbss_event_callback
  1758. [ 300.837157] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
  1759. [ 302.285977] survey done event(3a)
  1760. [ 302.286918] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
  1761. [ 302.286923] set_mode = IW_MODE_INFRA
  1762. [ 302.286932]
  1763. [ 302.286932] wpa_ie(length:22):
  1764. [ 302.286934] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
  1765. [ 302.286936] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
  1766. [ 302.286938] 0x00 0x0f 0xac 0x02 0x00 0x00 0xad 0xde
  1767. [ 302.288597] SetHwReg8192CU, 5117, RCR= 700060ca
  1768. [ 302.288613] =>rtw_wx_set_essid
  1769. [ 302.288615] ssid=shiiit, len=6
  1770. [ 302.288619] Set SSID under fw_state=0x00000008
  1771. [ 302.288622] [by_bssid:0][assoc_ssid:shiiit][to_roaming:0] new candidate: shiiit(d8:5d:4c:d5:07:be) rssi:-28
  1772. [ 302.288625] rtw_select_and_join_from_scanned_queue: candidate: shiiit(d8:5d:4c:d5:07:be, ch:6)
  1773. [ 302.288631] link to new AP
  1774. [ 302.288632] <=rtw_wx_set_essid, ret 0
  1775. [ 302.288637] Set BSSID under fw_state=0x00000088
  1776. [ 302.292342] hw_var_set_opmode()-4221 mode = 2
  1777. [ 302.292716] set ch/bw before connected
  1778. [ 302.301616] link to new AP
  1779. [ 302.301626] issue_deauth to d8:5d:4c:d5:07:be
  1780. [ 302.602014] link_timer_hdl: auth timeout and try again
  1781. [ 302.903040] link_timer_hdl: auth timeout and try again
  1782. [ 303.204038] link_timer_hdl: auth timeout and try again
  1783. [ 303.505045] link_timer_hdl: auth timeout and try again
  1784. [ 303.806037] report_join_res(-1)
  1785. [ 303.807036] _rtw_join_timeout_handler, fw_state=8
  1786. [ 303.807122] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  1787. [ 303.807993] =>mlmeext_joinbss_event_callback
  1788. [ 303.808028] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
  1789. [ 303.907490] IW_SCAN_THIS_ESSID, ssid=shiiit, len=6
  1790. [ 305.257958] survey done event(42)
  1791. [ 305.258999] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
  1792. [ 305.259015] set_mode = IW_MODE_INFRA
  1793. [ 305.259023]
  1794. [ 305.259023] wpa_ie(length:22):
  1795. [ 305.259026] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
  1796. [ 305.259029] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
  1797. [ 305.259031] 0x00 0x0f 0xac 0x02 0x00 0x00 0x2e 0x73
  1798. [ 305.259457] SetHwReg8192CU, 5117, RCR= 700060ca
  1799. [ 305.259468] =>rtw_wx_set_essid
  1800. [ 305.259469] ssid=shiiit, len=6
  1801. [ 305.259472] Set SSID under fw_state=0x00000008
  1802. [ 305.259475] [by_bssid:0][assoc_ssid:shiiit][to_roaming:0] new candidate: shiiit(d8:5d:4c:d5:07:be) rssi:-68
  1803. [ 305.259478] rtw_select_and_join_from_scanned_queue: candidate: shiiit(d8:5d:4c:d5:07:be, ch:6)
  1804. [ 305.259484] link to new AP
  1805. [ 305.259486] <=rtw_wx_set_essid, ret 0
  1806. [ 305.259490] Set BSSID under fw_state=0x00000088
  1807. [ 305.260222] hw_var_set_opmode()-4221 mode = 2
  1808. [ 305.260578] set ch/bw before connected
  1809. [ 305.375160] link to new AP
  1810. [ 305.375168] issue_deauth to d8:5d:4c:d5:07:be
  1811. [ 305.676016] link_timer_hdl: auth timeout and try again
  1812. [ 305.977046] link_timer_hdl: auth timeout and try again
  1813. [ 306.278035] link_timer_hdl: auth timeout and try again
  1814. [ 306.579019] link_timer_hdl: auth timeout and try again
  1815. [ 306.880037] report_join_res(-1)
  1816. [ 306.881019] _rtw_join_timeout_handler, fw_state=8
  1817. [ 306.881026] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  1818. [ 306.882027] =>mlmeext_joinbss_event_callback
  1819. [ 306.882033] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
  1820. [ 308.331017] survey done event(33)
  1821. [ 308.333740] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
  1822. [ 308.333751] set_mode = IW_MODE_INFRA
  1823. [ 308.333838]
  1824. [ 308.333838] wpa_ie(length:22):
  1825. [ 308.333847] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
  1826. [ 308.333852] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
  1827. [ 308.333857] 0x00 0x0f 0xac 0x02 0x00 0x00 0xff 0xff
  1828. [ 308.334505] hw_var_set_opmode()-4221 mode = 2
  1829. [ 308.335383] SetHwReg8192CU, 5117, RCR= 700060ca
  1830. [ 308.339089] =>rtw_wx_set_essid
  1831. [ 308.339097] ssid=shiiit, len=6
  1832. [ 308.339112] Set SSID under fw_state=0x00000008
  1833. [ 308.339121] [by_bssid:0][assoc_ssid:shiiit][to_roaming:0] new candidate: shiiit(d8:5d:4c:d5:07:be) rssi:-28
  1834. [ 308.339129] rtw_select_and_join_from_scanned_queue: candidate: shiiit(d8:5d:4c:d5:07:be, ch:6)
  1835. [ 308.339143] link to new AP
  1836. [ 308.339149] <=rtw_wx_set_essid, ret 0
  1837. [ 308.339177] Set BSSID under fw_state=0x00000088
  1838. [ 308.341510] set ch/bw before connected
  1839. [ 308.448844] link to new AP
  1840. [ 308.448860] issue_deauth to d8:5d:4c:d5:07:be
  1841. [ 308.749077] link_timer_hdl: auth timeout and try again
  1842. [ 309.050075] link_timer_hdl: auth timeout and try again
  1843. [ 309.351065] link_timer_hdl: auth timeout and try again
  1844. [ 309.652013] link_timer_hdl: auth timeout and try again
  1845. [ 309.953035] report_join_res(-1)
  1846. [ 309.954021] _rtw_join_timeout_handler, fw_state=8
  1847. [ 309.954063] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  1848. [ 309.954694] =>mlmeext_joinbss_event_callback
  1849. [ 309.954702] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
  1850. [ 310.054475] IW_SCAN_THIS_ESSID, ssid=shiiit, len=6
  1851. [ 311.404927] survey done event(30)
  1852. [ 311.407791] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
  1853. [ 311.407803] set_mode = IW_MODE_INFRA
  1854. [ 311.407895]
  1855. [ 311.407895] wpa_ie(length:22):
  1856. [ 311.407903] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
  1857. [ 311.407908] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
  1858. [ 311.407913] 0x00 0x0f 0xac 0x02 0x00 0x00 0x63 0x68
  1859. [ 311.408549] hw_var_set_opmode()-4221 mode = 2
  1860. [ 311.409167] SetHwReg8192CU, 5117, RCR= 700060ca
  1861. [ 311.409239] =>rtw_wx_set_essid
  1862. [ 311.409244] ssid=shiiit, len=6
  1863. [ 311.409255] Set SSID under fw_state=0x00000008
  1864. [ 311.409264] [by_bssid:0][assoc_ssid:shiiit][to_roaming:0] new candidate: shiiit(d8:5d:4c:d5:07:be) rssi:-30
  1865. [ 311.409271] rtw_select_and_join_from_scanned_queue: candidate: shiiit(d8:5d:4c:d5:07:be, ch:6)
  1866. [ 311.409283] link to new AP
  1867. [ 311.409288] <=rtw_wx_set_essid, ret 0
  1868. [ 311.409364] Set BSSID under fw_state=0x00000088
  1869. [ 311.409442] set ch/bw before connected
  1870. [ 311.627082] link to new AP
  1871. [ 311.627107] issue_deauth to d8:5d:4c:d5:07:be
  1872. [ 311.928045] link_timer_hdl: auth timeout and try again
  1873. [ 312.229061] link_timer_hdl: auth timeout and try again
  1874. [ 312.530060] link_timer_hdl: auth timeout and try again
  1875. [ 312.831060] link_timer_hdl: auth timeout and try again
  1876. [ 313.132027] report_join_res(-1)
  1877. [ 313.133047] _rtw_join_timeout_handler, fw_state=8
  1878. [ 313.133424] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  1879. [ 313.134170] =>mlmeext_joinbss_event_callback
  1880. [ 313.134183] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
  1881. [ 314.582864] survey done event(37)
  1882. [ 314.583857] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
  1883. [ 314.583861] set_mode = IW_MODE_INFRA
  1884. [ 314.583870]
  1885. [ 314.583870] wpa_ie(length:22):
  1886. [ 314.583873] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
  1887. [ 314.583874] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
  1888. [ 314.583876] 0x00 0x0f 0xac 0x02 0x00 0x00 0x00 0x00
  1889. [ 314.584365] SetHwReg8192CU, 5117, RCR= 700060ca
  1890. [ 314.584380] =>rtw_wx_set_essid
  1891. [ 314.584382] ssid=shiiit, len=6
  1892. [ 314.584385] Set SSID under fw_state=0x00000008
  1893. [ 314.584388] [by_bssid:0][assoc_ssid:shiiit][to_roaming:0] new candidate: shiiit(d8:5d:4c:d5:07:be) rssi:-31
  1894. [ 314.584391] rtw_select_and_join_from_scanned_queue: candidate: shiiit(d8:5d:4c:d5:07:be, ch:6)
  1895. [ 314.584397] link to new AP
  1896. [ 314.584399] <=rtw_wx_set_essid, ret 0
  1897. [ 314.584403] Set BSSID under fw_state=0x00000088
  1898. [ 314.586369] hw_var_set_opmode()-4221 mode = 2
  1899. [ 314.586740] set ch/bw before connected
  1900. [ 314.701105] link to new AP
  1901. [ 314.701131] issue_deauth to d8:5d:4c:d5:07:be
  1902. [ 315.002049] link_timer_hdl: auth timeout and try again
  1903. [ 315.303049] link_timer_hdl: auth timeout and try again
  1904. [ 315.604062] link_timer_hdl: auth timeout and try again
  1905. [ 315.905077] link_timer_hdl: auth timeout and try again
  1906. [ 316.206024] report_join_res(-1)
  1907. [ 316.207028] _rtw_join_timeout_handler, fw_state=8
  1908. [ 316.207082] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  1909. [ 316.207815] =>mlmeext_joinbss_event_callback
  1910. [ 316.207827] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
  1911. [ 316.307622] IW_SCAN_THIS_ESSID, ssid=shiiit, len=6
  1912. [ 317.658052] survey done event(39)
  1913. [ 317.661538] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
  1914. [ 317.661549] set_mode = IW_MODE_INFRA
  1915. [ 317.661675]
  1916. [ 317.661675] wpa_ie(length:22):
  1917. [ 317.661683] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
  1918. [ 317.661688] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
  1919. [ 317.661693] 0x00 0x0f 0xac 0x02 0x00 0x00 0xff 0xff
  1920. [ 317.662672] hw_var_set_opmode()-4221 mode = 2
  1921. [ 317.663422] SetHwReg8192CU, 5117, RCR= 700060ca
  1922. [ 317.663505] =>rtw_wx_set_essid
  1923. [ 317.663511] ssid=shiiit, len=6
  1924. [ 317.663528] Set SSID under fw_state=0x00000008
  1925. [ 317.663538] [by_bssid:0][assoc_ssid:shiiit][to_roaming:0] new candidate: shiiit(d8:5d:4c:d5:07:be) rssi:-29
  1926. [ 317.663546] rtw_select_and_join_from_scanned_queue: candidate: shiiit(d8:5d:4c:d5:07:be, ch:6)
  1927. [ 317.663558] link to new AP
  1928. [ 317.663578] <=rtw_wx_set_essid, ret 0
  1929. [ 317.663642] Set BSSID under fw_state=0x00000088
  1930. [ 317.663665] set ch/bw before connected
  1931. [ 317.772128] link to new AP
  1932. [ 317.772143] issue_deauth to d8:5d:4c:d5:07:be
  1933. [ 318.073017] link_timer_hdl: auth timeout and try again
  1934. [ 318.374067] link_timer_hdl: auth timeout and try again
  1935. [ 318.675022] link_timer_hdl: auth timeout and try again
  1936. [ 318.976065] link_timer_hdl: auth timeout and try again
  1937. [ 319.277065] report_join_res(-1)
  1938. [ 319.278042] _rtw_join_timeout_handler, fw_state=8
  1939. [ 319.278107] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  1940. [ 319.279145] =>mlmeext_joinbss_event_callback
  1941. [ 319.279159] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
  1942. [ 320.727972] survey done event(38)
  1943. [ 320.730321] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
  1944. [ 320.730332] set_mode = IW_MODE_INFRA
  1945. [ 320.730357]
  1946. [ 320.730357] wpa_ie(length:22):
  1947. [ 320.730365] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
  1948. [ 320.730370] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
  1949. [ 320.730375] 0x00 0x0f 0xac 0x02 0x00 0x00 0x7f 0x0f
  1950. [ 320.730834] SetHwReg8192CU, 5117, RCR= 700060ca
  1951. [ 320.730863] =>rtw_wx_set_essid
  1952. [ 320.730867] ssid=shiiit, len=6
  1953. [ 320.730875] Set SSID under fw_state=0x00000008
  1954. [ 320.730885] [by_bssid:0][assoc_ssid:shiiit][to_roaming:0] new candidate: shiiit(d8:5d:4c:d5:07:be) rssi:-32
  1955. [ 320.730892] rtw_select_and_join_from_scanned_queue: candidate: shiiit(d8:5d:4c:d5:07:be, ch:6)
  1956. [ 320.730903] link to new AP
  1957. [ 320.730908] <=rtw_wx_set_essid, ret 0
  1958. [ 320.730921] Set BSSID under fw_state=0x00000088
  1959. [ 320.731828] hw_var_set_opmode()-4221 mode = 2
  1960. [ 320.732203] set ch/bw before connected
  1961. [ 320.845661] link to new AP
  1962. [ 320.845677] issue_deauth to d8:5d:4c:d5:07:be
  1963. [ 321.146022] link_timer_hdl: auth timeout and try again
  1964. [ 321.447023] link_timer_hdl: auth timeout and try again
  1965. [ 321.748026] link_timer_hdl: auth timeout and try again
  1966. [ 322.049014] link_timer_hdl: auth timeout and try again
  1967. [ 322.350037] report_join_res(-1)
  1968. [ 322.351018] _rtw_join_timeout_handler, fw_state=8
  1969. [ 322.351285] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
  1970. [ 322.351876] =>mlmeext_joinbss_event_callback
  1971. [ 322.351883] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
  1972. [ 325.550991] survey done event(38)
  1973. [ 328.353025] survey done event(38)
  1974. [ 330.155784] wlan0: authenticate with d8:5d:4c:d5:07:be
  1975. [ 330.159097] wlan0: send auth to d8:5d:4c:d5:07:be (try 1/3)
  1976. [ 330.165903] wlan0: authenticated
  1977. [ 330.167025] wlan0: associate with d8:5d:4c:d5:07:be (try 1/3)
  1978. [ 330.171854] wlan0: RX AssocResp from d8:5d:4c:d5:07:be (capab=0x411 status=0 aid=2)
  1979. [ 330.173335] wlan0: associated
  1980. [ 330.173365] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1981. [ 330.173433] cfg80211: Calling CRDA for country: US
  1982. [ 330.177518] cfg80211: Regulatory domain changed to country: US
  1983. [ 330.177523] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  1984. [ 330.177525] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1985. [ 330.177527] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
  1986. [ 330.177528] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1987. [ 330.177530] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1988. [ 330.177532] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1989. [ 330.177533] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!