Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
-
- the speed of a blower can be done two ways mechanically and electrically
-
- the correct tension on a belt is 1/4 inch deflection per foot of free span
-
- belts are sized according to manufacturer and part number or length and width at top of belt
-
- sheave is open, fan speed low
-
- sheave is closed, fan speed high
-
- list the three motors a multispeed direct drive blower will have PSC, shaded pole, ECM
-
- the formula for temperature rise is supply air minus return air
-
- the formula for temperature drop is return air minus supply air
-
- if the temperature rise is too high the fan speed would need to be _________ increased
-
- if the temperature rise is too low the fan speed would need to be ____________ reduced
-
- when the fan is mounted on the shaft of the motor it is a direct drive
- when checking a motor for a ground condition the two ohmmeter leads are on a motor lead and on the motor housing
-
- if a voltage exists between a motor housing and a water pipe the condition is grounded
-
- what two single phase motors do not use a starting relay PSC and shaded pole
-
- when the line voltage drops the starting and pull out torque drops
-
- when the line voltage increases the starting and pull out torque increases
-
- the FLA will be the _________ of the line voltage inverse
-
- a PSC motor has a _________ run capacitor
-
- which meter is used on a shorted winding ohmmeter
-
- a motor winding test that indicates 'O.L.' is open
-
- a motor winding test that indicates '0' is shorted
-
- any reading on the ohmmeter during a ground test is not good
-
- a shaded pole motor is inexpensive and inefficient
-
- a CS motor has a high starting torque
-
- a motor using low and high speed for a furnace/air conditioning application will require _______ circuits two parallel
-
- a physical feature of a shaded pole motor is that it does not have a capacitor
-
- an open housing motor used with a belt drive will be a split phase motor
-
- a split phase motor will use a _______ as the start winding disconnect centrifugal switch
-
- a motor one will rarely find on a furnace is a CS motor
-
- a motor one will never find on a furnace is a CSR motor
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement