Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Nickem Pastebin
- --
- DMESG:
- [ 2.074173] sky2 0000:02:00.0: setting latency timer to 64
- [ 2.074208] sky2 0000:02:00.0: Yukon-2 FE chip revision 1
- [ 2.074350] sky2 0000:02:00.0: irq 43 for MSI/MSI-X
- [ 2.075174] sky2 0000:02:00.0: eth0: addr 00:1b:24:49:e4:b5
- [ 2.140081] usb 3-2: new low speed USB device using uhci_hcd and address 2
- [ 2.308312] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- [ 4.984557] <30>udev[297]: starting version 167
- [ 5.384628] Adding 2086908k swap on /dev/sda5. Priority:-1 extents:1 across:2086908k
- [ 6.880053] yenta_cardbus 0000:0a:09.0: CardBus bridge found [1025:0110]
- [ 6.880082] yenta_cardbus 0000:0a:09.0: Using CSCINT to route CSC interrupts to PCI
- [ 6.880085] yenta_cardbus 0000:0a:09.0: Routing CardBus interrupts to PCI
- [ 6.880093] yenta_cardbus 0000:0a:09.0: TI: mfunc 0x01321b22, devctl 0x66
- [ 7.060946] input: KYE Genius USB Wheel Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input5
- [ 7.061251] generic-usb 0003:0458:0003.0001: input,hidraw0: USB HID v1.00 Mouse [KYE Genius USB Wheel Mouse] on usb-0000:00:1d.1-2/input0
- [ 7.061314] usbcore: registered new interface driver usbhid
- [ 7.061317] usbhid: USB HID core driver
- [ 7.078211] intel_rng: FWH not detected
- [ 7.112838] yenta_cardbus 0000:0a:09.0: ISA IRQ mask 0x0cf8, PCI irq 20
- [ 7.112844] yenta_cardbus 0000:0a:09.0: Socket status: 30000006
- [ 7.112849] pci_bus 0000:0a: Raising subordinate bus# of parent bus (#0a) from #0b to #0e
- [ 7.112861] yenta_cardbus 0000:0a:09.0: pcmcia: parent PCI bridge window: [io 0x5000-0x5fff]
- [ 7.112866] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff: excluding 0x5000-0x50ff 0x5400-0x54ff
- [ 7.119407] leds_ss4200: no LED devices found
- [ 7.120168]
- [ 7.120175] yenta_cardbus 0000:0a:09.0: pcmcia: parent PCI bridge window: [mem 0xd0200000-0xd02fffff]
- [ 7.120180] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0200000-0xd02fffff: excluding 0xd0200000-0xd020ffff
- [ 7.120198] yenta_cardbus 0000:0a:09.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref]
- [ 7.120202] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff: excluding 0x80000000-0x83ffffff
- [ 7.120749] tifm_7xx1 0000:0a:09.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- [ 7.306045] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
- [ 7.306157] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
- [ 7.570228] cfg80211: Calling CRDA to update world regulatory domain
- [ 7.777302] [drm] Initialized drm 1.1.0 20060810
- [ 7.814802] lp: driver loaded but no devices found
- [ 8.122840] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
- [ 8.124970] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
- [ 8.125861] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
- [ 8.126598] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
- [ 8.127408] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xcc000-0xcffff 0xdc000-0xdffff 0xe4000-0xfffff
- [ 8.127491] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
- [ 8.127571] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
- [ 8.127650] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
- [ 8.371964] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 8.371974] i915 0000:00:02.0: setting latency timer to 64
- [ 8.375858] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 8.375862] [drm] Driver supports precise vblank timestamp query.
- [ 8.415783] ath5k 0000:03:00.0: enabling device (0000 -> 0002)
- [ 8.415796] ath5k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 8.415812] ath5k 0000:03:00.0: setting latency timer to 64
- [ 8.415865] ath5k 0000:03:00.0: registered as 'phy0'
- [ 8.448135] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
- [ 8.448596] [drm] initialized overlay support
- [ 8.838665] type=1400 audit(1313705240.657:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=449 comm="apparmor_parser"
- [ 8.839676] type=1400 audit(1313705240.657:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=449 comm="apparmor_parser"
- [ 8.840359] type=1400 audit(1313705240.661:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=449 comm="apparmor_parser"
- [ 8.841416] type=1400 audit(1313705240.661:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=470 comm="apparmor_parser"
- [ 8.842424] type=1400 audit(1313705240.661:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=470 comm="apparmor_parser"
- [ 8.843067] type=1400 audit(1313705240.661:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=470 comm="apparmor_parser"
- [ 8.927222] ath: EEPROM regdomain: 0x65
- [ 8.927225] ath: EEPROM indicates we should expect a direct regpair map
- [ 8.927230] ath: Country alpha2 being used: 00
- [ 8.927232] ath: Regpair used: 0x65
- [ 8.927237] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
- [ 8.927241] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 8.927245] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
- [ 8.927248] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 8.927252] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
- [ 8.927255] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 8.927259] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
- [ 8.927262] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 8.927266] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
- [ 8.927269] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 8.927273] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
- [ 8.927276] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 8.927280] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
- [ 8.927283] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 8.927287] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
- [ 8.927290] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 8.927294] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
- [ 8.927297] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 8.927301] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
- [ 8.927304] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 8.927308] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
- [ 8.927311] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 8.927315] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
- [ 8.927318] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 8.927322] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
- [ 8.927325] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 8.927329] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
- [ 8.927399] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
- [ 8.951000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000/0x0
- [ 9.011175] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
- [ 9.035923] fbcon: inteldrmfb (fb0) is primary device
- [ 9.036633] Console: switching to colour frame buffer device 160x50
- [ 9.036684] fb0: inteldrmfb frame buffer device
- [ 9.036687] drm: registered panic notifier
- [ 9.036883] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
- [ 9.142060] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- [ 9.142135] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
- [ 9.142176] HDA Intel 0000:00:1b.0: setting latency timer to 64
- [ 9.293122] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
- [ 9.293131] cfg80211: World regulatory domain updated:
- [ 9.293134] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 9.293138] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 9.293142] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 9.293146] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 9.293150] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 9.293153] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 9.625237] hda_codec: ALC883: SKU not ready 0x411111f0
- [ 9.642188] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
- [ 9.663889] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 9.664818] Registered led device: ath5k-phy0::rx
- [ 9.664849] Registered led device: ath5k-phy0::tx
- [ 9.664861] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
- [ 10.028571] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
- [ 15.829522] type=1400 audit(1313705247.649:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=783 comm="apparmor_parser"
- [ 15.830568] type=1400 audit(1313705247.649:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=783 comm="apparmor_parser"
- [ 15.831218] type=1400 audit(1313705247.649:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=783 comm="apparmor_parser"
- [ 15.910802] type=1400 audit(1313705247.729:11): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=782 comm="apparmor_parser"
- [ 16.039380] type=1400 audit(1313705247.857:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=784 comm="apparmor_parser"
- [ 16.052975] type=1400 audit(1313705247.873:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=784 comm="apparmor_parser"
- [ 16.061413] type=1400 audit(1313705247.881:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=784 comm="apparmor_parser"
- [ 16.107949] type=1400 audit(1313705247.925:15): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=794 comm="apparmor_parser"
- [ 16.255581] type=1400 audit(1313705248.077:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=790 comm="apparmor_parser"
- [ 16.256817] type=1400 audit(1313705248.077:17): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=790 comm="apparmor_parser"
- [ 16.452784] ppdev: user-space parallel port driver
- [ 20.664658] sky2 0000:02:00.0: eth0: enabling interface
- [ 20.664965] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 20.676546] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 22.329584] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
- [ 22.329788] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 25.916343] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
- [ 33.168122] eth0: no IPv6 routers present
- [ 44.849396] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
- [ 74.248111] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
- [ 74.248141] pci 0000:0b:00.0: [14e4:4320] type 0 class 0x000280
- [ 74.248175] pci 0000:0b:00.0: reg 10: [mem 0x00000000-0x00001fff]
- [ 74.248302] pci 0000:0b:00.0: supports D1 D2
- [ 74.248305] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 74.248313] pci 0000:0b:00.0: PME# disabled
- [ 74.248332] pci 0000:0b:00.0: BAR 0: assigned [mem 0x88000000-0x88001fff]
- [ 74.248341] pci 0000:0b:00.0: BAR 0: set to [mem 0x88000000-0x88001fff] (PCI address [0x88000000-0x88001fff])
- [ 74.248356] pci 0000:0b:00.0: cache line size of 64 is not supported
- [ 74.295180] b43-pci-bridge 0000:0b:00.0: enabling device (0000 -> 0002)
- [ 74.295195] b43-pci-bridge 0000:0b:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- [ 74.295211] b43-pci-bridge 0000:0b:00.0: setting latency timer to 64
- [ 74.295262] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243)
- [ 74.295272] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243)
- [ 74.295282] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243)
- [ 74.295292] ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)
- [ 74.295302] ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243)
- [ 74.299380] ssb: Sonics Silicon Backplane found on PCI device 0000:0b:00.0
- [ 74.354304] b43-phy1: Broadcom 4306 WLAN found (core revision 5)
- [ 74.400227] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
- [ 74.400233] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 74.400237] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
- [ 74.400241] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 74.400244] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
- [ 74.400248] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 74.400251] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
- [ 74.400255] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 74.400258] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
- [ 74.400262] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 74.400265] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
- [ 74.400269] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 74.400273] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
- [ 74.400276] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 74.400280] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
- [ 74.400284] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 74.400287] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
- [ 74.400291] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 74.400294] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
- [ 74.400298] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 74.400301] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
- [ 74.400305] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 74.400308] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
- [ 74.400312] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 74.400316] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
- [ 74.400320] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 74.400323] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
- [ 74.400327] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 74.400518] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
- [ 74.401526] Registered led device: b43-phy1::tx
- [ 74.401599] Registered led device: b43-phy1::rx
- [ 74.401670] Registered led device: b43-phy1::radio
- [ 74.401699] Broadcom 43xx driver loaded [ Features: PNL, Firmware-ID: FW13 ]
- [ 74.491371] b43-phy1 ERROR: Firmware file "b43/ucode5.fw" not found
- [ 74.491377] b43-phy1 ERROR: Firmware file "b43-open/ucode5.fw" not found
- [ 74.491381] b43-phy1 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
- [ 334.331474] pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0
- [ 334.416405] b43-pci-bridge 0000:0b:00.0: PCI INT A disabled
- [ 366.056148] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
- [ 366.056192] pci 0000:0b:00.0: [14e4:4320] type 0 class 0x000280
- [ 366.056238] pci 0000:0b:00.0: reg 10: [mem 0x00000000-0x00001fff]
- [ 366.056394] pci 0000:0b:00.0: supports D1 D2
- [ 366.056401] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 366.056413] pci 0000:0b:00.0: PME# disabled
- [ 366.056439] pci 0000:0b:00.0: BAR 0: assigned [mem 0x88000000-0x88001fff]
- [ 366.056454] pci 0000:0b:00.0: BAR 0: set to [mem 0x88000000-0x88001fff] (PCI address [0x88000000-0x88001fff])
- [ 366.056476] pci 0000:0b:00.0: cache line size of 64 is not supported
- [ 366.056666] b43-pci-bridge 0000:0b:00.0: enabling device (0000 -> 0002)
- [ 366.056685] b43-pci-bridge 0000:0b:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- [ 366.056705] b43-pci-bridge 0000:0b:00.0: setting latency timer to 64
- [ 366.056797] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243)
- [ 366.056813] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243)
- [ 366.056828] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243)
- [ 366.056843] ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)
- [ 366.056858] ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243)
- [ 366.061115] b43-phy2: Broadcom 4306 WLAN found (core revision 5)
- [ 366.108297] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
- [ 366.108309] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 366.108317] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
- [ 366.108326] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 366.108333] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
- [ 366.108341] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 366.108349] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
- [ 366.108357] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 366.108364] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
- [ 366.108373] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 366.108380] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
- [ 366.108388] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 366.108396] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
- [ 366.108404] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 366.108411] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
- [ 366.108420] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 366.108427] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
- [ 366.108435] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 366.108442] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
- [ 366.108451] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 366.108458] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
- [ 366.108466] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 366.108474] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
- [ 366.108482] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 366.108489] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
- [ 366.108498] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 366.108505] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
- [ 366.108513] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 366.108967] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht'
- [ 366.111446] Registered led device: b43-phy2::tx
- [ 366.111535] Registered led device: b43-phy2::rx
- [ 366.111603] Registered led device: b43-phy2::radio
- [ 366.111694] ssb: Sonics Silicon Backplane found on PCI device 0000:0b:00.0
- [ 366.160204] b43-phy2 ERROR: Firmware file "b43/ucode5.fw" not found
- [ 366.160215] b43-phy2 ERROR: Firmware file "b43-open/ucode5.fw" not found
- [ 366.160223] b43-phy2 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
- [ 994.160290] pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0
- [ 994.261488] b43-pci-bridge 0000:0b:00.0: PCI INT A disabled
- [ 999.952184] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
- [ 999.952226] pci 0000:0b:00.0: [14e4:4320] type 0 class 0x000280
- [ 999.952272] pci 0000:0b:00.0: reg 10: [mem 0x00000000-0x00001fff]
- [ 999.952428] pci 0000:0b:00.0: supports D1 D2
- [ 999.952435] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 999.952448] pci 0000:0b:00.0: PME# disabled
- [ 999.952474] pci 0000:0b:00.0: BAR 0: assigned [mem 0x88000000-0x88001fff]
- [ 999.952489] pci 0000:0b:00.0: BAR 0: set to [mem 0x88000000-0x88001fff] (PCI address [0x88000000-0x88001fff])
- [ 999.952511] pci 0000:0b:00.0: cache line size of 64 is not supported
- [ 999.952705] b43-pci-bridge 0000:0b:00.0: enabling device (0000 -> 0002)
- [ 999.952724] b43-pci-bridge 0000:0b:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- [ 999.952744] b43-pci-bridge 0000:0b:00.0: setting latency timer to 64
- [ 999.952838] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243)
- [ 999.952854] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243)
- [ 999.952869] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243)
- [ 999.952884] ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)
- [ 999.952899] ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243)
- [ 999.957435] b43-phy3: Broadcom 4306 WLAN found (core revision 5)
- [ 1000.004302] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
- [ 1000.004313] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 1000.004321] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
- [ 1000.004329] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 1000.004336] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
- [ 1000.004345] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 1000.004352] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
- [ 1000.004360] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 1000.004367] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
- [ 1000.004376] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 1000.004383] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
- [ 1000.004391] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 1000.004398] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
- [ 1000.004407] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 1000.004414] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
- [ 1000.004422] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 1000.004429] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
- [ 1000.004438] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 1000.004445] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
- [ 1000.004453] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 1000.004460] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
- [ 1000.004468] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 1000.004476] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
- [ 1000.004484] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 1000.004491] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
- [ 1000.004500] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 1000.004507] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
- [ 1000.004515] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 1000.004779] ieee80211 phy3: Selected rate control algorithm 'minstrel_ht'
- [ 1000.007181] Registered led device: b43-phy3::tx
- [ 1000.007250] Registered led device: b43-phy3::rx
- [ 1000.007325] Registered led device: b43-phy3::radio
- [ 1000.007409] ssb: Sonics Silicon Backplane found on PCI device 0000:0b:00.0
- [ 1000.061454] b43-phy3 ERROR: Firmware file "b43/ucode5.fw" not found
- [ 1000.061465] b43-phy3 ERROR: Firmware file "b43-open/ucode5.fw" not found
- [ 1000.061474] b43-phy3 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
- [ 1761.000859] pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0
- [ 1761.096305] b43-pci-bridge 0000:0b:00.0: PCI INT A disabled
- [ 1764.536162] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
- [ 1764.536204] pci 0000:0b:00.0: [14e4:4320] type 0 class 0x000280
- [ 1764.536250] pci 0000:0b:00.0: reg 10: [mem 0x00000000-0x00001fff]
- [ 1764.536406] pci 0000:0b:00.0: supports D1 D2
- [ 1764.536413] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 1764.536426] pci 0000:0b:00.0: PME# disabled
- [ 1764.536453] pci 0000:0b:00.0: BAR 0: assigned [mem 0x88000000-0x88001fff]
- [ 1764.536482] pci 0000:0b:00.0: BAR 0: set to [mem 0x88000000-0x88001fff] (PCI address [0x88000000-0x88001fff])
- [ 1764.536504] pci 0000:0b:00.0: cache line size of 64 is not supported
- [ 1764.536697] b43-pci-bridge 0000:0b:00.0: enabling device (0000 -> 0002)
- [ 1764.536716] b43-pci-bridge 0000:0b:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- [ 1764.536737] b43-pci-bridge 0000:0b:00.0: setting latency timer to 64
- [ 1764.536832] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243)
- [ 1764.536848] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243)
- [ 1764.536863] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243)
- [ 1764.536878] ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)
- [ 1764.536893] ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243)
- [ 1764.541164] b43-phy4: Broadcom 4306 WLAN found (core revision 5)
- [ 1764.588263] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
- [ 1764.588275] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 1764.588283] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
- [ 1764.588291] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 1764.588299] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
- [ 1764.588307] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 1764.588314] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
- [ 1764.588323] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 1764.588330] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
- [ 1764.588339] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 1764.588346] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
- [ 1764.588354] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 1764.588362] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
- [ 1764.588370] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 1764.588377] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
- [ 1764.588386] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 1764.588393] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
- [ 1764.588401] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 1764.588408] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
- [ 1764.588417] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 1764.588424] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
- [ 1764.588433] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 1764.588440] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
- [ 1764.588448] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 1764.588456] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
- [ 1764.588464] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 1764.588471] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
- [ 1764.588480] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 1764.588874] ieee80211 phy4: Selected rate control algorithm 'minstrel_ht'
- [ 1764.591585] Registered led device: b43-phy4::tx
- [ 1764.591667] Registered led device: b43-phy4::rx
- [ 1764.591735] Registered led device: b43-phy4::radio
- [ 1764.591827] ssb: Sonics Silicon Backplane found on PCI device 0000:0b:00.0
- [ 1764.640512] b43-phy4 ERROR: Firmware file "b43/ucode5.fw" not found
- [ 1764.640523] b43-phy4 ERROR: Firmware file "b43-open/ucode5.fw" not found
- [ 1764.640531] b43-phy4 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
- LSPCI:
- 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
- 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
- 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
- 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
- 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
- 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02)
- 00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02)
- 00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02)
- 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
- 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
- 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
- 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02)
- 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
- 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
- 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
- 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
- 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8038 PCI-E Fast Ethernet Controller (rev 14)
- 03:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
- 0a:09.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
- 0a:09.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
- 0b:00.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement