dmesg

Initializing cgroup subsys cpu
Linux version 3.7.3-ext73-f1-22.0-k8-ags-cfs (root@ext73-stacjonarka) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-11precise2) ) #15 SMP PREEMPT Sun Jan 20 14:51:06 CET 2013
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000005ffeffff] usable
BIOS-e820: [mem 0x000000005fff0000-0x000000005fff2fff] ACPI NVS
BIOS-e820: [mem 0x000000005fff3000-0x000000005fffffff] ACPI data
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
Notice: NX (Execute Disable) protection missing in CPU!
DMI 2.2 present.
DMI: VIA Technologies, Inc. P4X400-8233/5/P4X400-8233/5, BIOS 6.00 PG 01/17/2003
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x5fff0 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CCFFF write-protect
  CD000-EFFFF uncachable
  F0000-F7FFF write-through
  F8000-F8FFF uncachable
  F9000-FFFFF write-through
MTRR variable ranges enabled:
  0 base 000000000 mask FC0000000 write-back
  1 base 040000000 mask FE0000000 write-back
  2 base 0C0000000 mask FF0000000 write-combining
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000f4ac0-0x000f4acf] mapped at [c00f4ac0]
initial memory mapped: [mem 0x00000000-0x01bfffff]
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x37bfdfff]
 [mem 0x00000000-0x001fffff] page 4k
 [mem 0x00200000-0x379fffff] page 2M
 [mem 0x37a00000-0x37bfdfff] page 4k
kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01bfa000-0x01bfffff]
RAMDISK: [mem 0x35848000-0x36c1bfff]
ACPI: RSDP 000f65b0 00014 (v00 VIAP4X)
ACPI: RSDT 5fff3000 0002C (v01 VIAP4X AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 5fff3040 00074 (v01 VIAP4X AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 5fff30c0 03EE4 (v01 VIAP4X AWRDACPI 00001000 MSFT 0100000D)
ACPI: FACS 5fff0000 00040
ACPI: APIC 5fff6fc0 00068 (v01 VIAP4X AWRDACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
643MB HIGHMEM available.
891MB LOWMEM available.
  mapped low ram: 0 - 37bfe000
  low ram: 0 - 37bfe000
Zone ranges:
  DMA      [mem 0x00010000-0x00ffffff]
  Normal   [mem 0x01000000-0x37bfdfff]
  HighMem  [mem 0x37bfe000-0x5ffeffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00010000-0x0009efff]
  node   0: [mem 0x00100000-0x5ffeffff]
On node 0 totalpages: 393087
free_area_init_node: node 0, pgdat c16eaac0, node_mem_map f6ffd200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 1752 pages used for memmap
  Normal zone: 222502 pages, LIFO batch:31
  HighMem zone: 1288 pages used for memmap
  HighMem zone: 163562 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
e820: [mem 0x60000000-0xfebfffff] available for PCI devices
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 12 pages/cpu @f6fdc000 s26688 r0 d22464 u49152
pcpu-alloc: s26688 r0 d22464 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 390015
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.7.3-ext73-f1-22.0-k8-ags-cfs root=UUID=ca62dd11-2c07-4c99-b855-bf9370731ed6 ro vga=normal rootdelay=120 combined_mode=ide combined_mode=libata enable_atapi=1 init=/sbin/e4rat-preload pcie_aspm=force acpi_osi=Linux acpi_enforce_resources=lax
PCIe ASPM is forcibly enabled
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
__ex_table already sorted, skipping sort
Initializing CPU#0
Initializing HighMem for node 0 (00037bfe:0005fff0)
Memory: 1530824k/1572800k available (5554k kernel code, 41524k reserved, 1554k data, 436k init, 659400k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff17000 - 0xfffff000   ( 928 kB)
    pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
    vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
      .init : 0xc16f2000 - 0xc175f000   ( 436 kB)
      .data : 0xc156ca63 - 0xc16f13c0   (1554 kB)
      .text : 0xc1000000 - 0xc156ca63   (5554 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptible hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	Dump stacks of tasks blocking RCU-preempt GP.
	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
NR_IRQS:2304 nr_irqs:512 16
CPU 0 irqstacks, hard=f5408000 soft=f540a000
Console: colour VGA+ 80x25
console [tty0] enabled
tsc: Fast TSC calibration using PIT
tsc: Detected 3059.120 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6118.24 BogoMIPS (lpj=3059120)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Mount-cache hash table entries: 512
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64
tlb_flushall_shift: 6
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20120913
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Pentium(R) 4 CPU 3.06GHz (fam: 0f, model: 02, stepping: 09)
Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
... version:                0
... bit width:              40
... generic registers:      18
... value mask:             000000ffffffffff
... max period:             0000007fffffffff
... fixed-purpose events:   0
... event mask:             000000000003ffff
CPU 1 irqstacks, hard=f5472000 soft=f5474000
smpboot: Booting Node   0, Processors  #1 OK
Initializing CPU#1
Brought up 2 CPUs
smpboot: Total of 2 processors activated (12234.45 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x5fff0000-0x5fff2fff] (12288 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb290, last bus=1
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x60000000-0xfebfffff] (ignored)
PCI: root bus 00: using default resources
pci_root PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
pci 0000:00:00.0: [1106:3168] type 00 class 0x060000
pci 0000:00:00.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
pci 0000:00:01.0: [1106:b168] type 01 class 0x060400
pci 0000:00:01.0: supports D1
pci 0000:00:0c.0: [10ec:8139] type 00 class 0x020000
pci 0000:00:0c.0: reg 10: [io  0xd000-0xd0ff]
pci 0000:00:0c.0: reg 14: [mem 0xe4000000-0xe40000ff]
pci 0000:00:0c.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:00:0c.0: supports D1 D2
pci 0000:00:0c.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.0: reg 20: [io  0xd400-0xd41f]
pci 0000:00:10.0: supports D1 D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.1: reg 20: [io  0xd800-0xd81f]
pci 0000:00:10.1: supports D1 D2
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.2: reg 20: [io  0xdc00-0xdc1f]
pci 0000:00:10.2: supports D1 D2
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.3: [1106:3104] type 00 class 0x0c0320
pci 0000:00:10.3: reg 10: [mem 0xe4001000-0xe40010ff]
pci 0000:00:10.3: supports D1 D2
pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:11.0: [1106:3177] type 00 class 0x060100
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:11.0: quirk: [io  0x0400-0x047f] claimed by vt8235 PM
pci 0000:00:11.0: quirk: [io  0x0500-0x050f] claimed by vt8235 SMB
pci 0000:00:11.1: [1106:0571] type 00 class 0x01018a
pci 0000:00:11.1: reg 20: [io  0xe000-0xe00f]
pci 0000:00:11.5: [1106:3059] type 00 class 0x040100
pci 0000:00:11.5: reg 10: [io  0xe400-0xe4ff]
pci 0000:00:11.5: supports D1 D2
pci 0000:01:00.0: [10de:02e2] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xe0ffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff pref]
pci 0000:01:00.0: reg 18: [mem 0xe1000000-0xe1ffffff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe2ffffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
 pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
 pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x5fff0000-0x5fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
Switching to clocksource refined-jiffies
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [bus 00-ff]
pnp 00:01: [io  0x0cf8-0x0cff]
pnp 00:01: [io  0x0000-0x0cf7 window]
pnp 00:01: [io  0x0d00-0xffff window]
pnp 00:01: [io  0x0400-0x047f]
pnp 00:01: [io  0x0500-0x050f]
pnp 00:01: [mem 0x000a0000-0x000bffff window]
pnp 00:01: [mem 0x000c0000-0x000dffff window]
pnp 00:01: [mem 0x60000000-0xfebfffff window]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:02: [io  0x0010-0x001f]
pnp 00:02: [io  0x0022-0x003f]
pnp 00:02: [io  0x0044-0x005f]
pnp 00:02: [io  0x0062-0x0063]
pnp 00:02: [io  0x0065-0x006f]
pnp 00:02: [io  0x0074-0x007f]
pnp 00:02: [io  0x0091-0x0093]
pnp 00:02: [io  0x00a2-0x00bf]
pnp 00:02: [io  0x00e0-0x00ef]
pnp 00:02: [io  0x04d0-0x04d1]
pnp 00:02: [io  0x0294-0x0297]
system 00:02: [io  0x04d0-0x04d1] has been reserved
system 00:02: [io  0x0294-0x0297] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io  0x0000-0x000f]
pnp 00:03: [io  0x0080-0x0090]
pnp 00:03: [io  0x0094-0x009f]
pnp 00:03: [io  0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [io  0x0070-0x0073]
pnp 00:04: [irq 8]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io  0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io  0x00f0-0x00ff]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io  0x03f2-0x03f5]
pnp 00:07: [io  0x03f7]
pnp 00:07: [irq 6]
pnp 00:07: [dma 2]
pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:08: [io  0x03f8-0x03ff]
pnp 00:08: [irq 4]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: [io  0x02f8-0x02ff]
pnp 00:09: [irq 3]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: [io  0x0378-0x037f]
pnp 00:0a: [io  0x0778-0x077b]
pnp 00:0a: [irq 7]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:0b: [io  0x0060]
pnp 00:0b: [io  0x0064]
pnp 00:0b: [irq 1]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:0c: [io  0x0201-0x0207]
pnp 00:0c: [io  0x0200]
pnp 00:0c: Plug and Play ACPI device, IDs PNPb02f (active)
pnp 00:0d: [io  0x0330-0x0331]
pnp 00:0d: [irq 10]
pnp 00:0d: Plug and Play ACPI device, IDs PNPb006 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
Switching to clocksource acpi_pm
pci 0000:00:0c.0: BAR 6: assigned [mem 0x60000000-0x6000ffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xe2000000-0xe201ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe2ffffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff pref]
pci 0000:00:01.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe2ffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: disabling DAC on VIA PCI bridge
ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 20304k freed
microcode: CPU0 sig=0xf29, pf=0x4, revision=0x0
microcode: CPU1 sig=0xf29, pf=0x4, revision=0x0
microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
audit: initializing netlink socket (disabled)
type=2000 audit(1360329188.782:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 1741
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Fan [FAN] (on)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (46 C)
Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
scsi0 : pata_acpi
scsi1 : pata_acpi
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.3: irq 21, io mem 0xe4001000
ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d800
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000dc00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: [email protected]
cpuidInitializing cgroup subsys cpu
Linux version 3.7.3-ext73-f1-22.0-k8-ags-cfs (root@ext73-stacjonarka) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-11precise2) ) #15 SMP PREEMPT Sun Jan 20 14:51:06 CET 2013
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000005ffeffff] usable
BIOS-e820: [mem 0x000000005fff0000-0x000000005fff2fff] ACPI NVS
BIOS-e820: [mem 0x000000005fff3000-0x000000005fffffff] ACPI data
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
Notice: NX (Execute Disable) protection missing in CPU!
DMI 2.2 present.
DMI: VIA Technologies, Inc. P4X400-8233/5/P4X400-8233/5, BIOS 6.00 PG 01/17/2003
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x5fff0 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CCFFF write-protect
  CD000-EFFFF uncachable
  F0000-F7FFF write-through
  F8000-F8FFF uncachable
  F9000-FFFFF write-through
MTRR variable ranges enabled:
  0 base 000000000 mask FC0000000 write-back
  1 base 040000000 mask FE0000000 write-back
  2 base 0C0000000 mask FF0000000 write-combining
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000f4ac0-0x000f4acf] mapped at [c00f4ac0]
initial memory mapped: [mem 0x00000000-0x01bfffff]
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x37bfdfff]
 [mem 0x00000000-0x001fffff] page 4k
 [mem 0x00200000-0x379fffff] page 2M
 [mem 0x37a00000-0x37bfdfff] page 4k
kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01bfa000-0x01bfffff]
RAMDISK: [mem 0x35848000-0x36c1bfff]
ACPI: RSDP 000f65b0 00014 (v00 VIAP4X)
ACPI: RSDT 5fff3000 0002C (v01 VIAP4X AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 5fff3040 00074 (v01 VIAP4X AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 5fff30c0 03EE4 (v01 VIAP4X AWRDACPI 00001000 MSFT 0100000D)
ACPI: FACS 5fff0000 00040
ACPI: APIC 5fff6fc0 00068 (v01 VIAP4X AWRDACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
643MB HIGHMEM available.
891MB LOWMEM available.
  mapped low ram: 0 - 37bfe000
  low ram: 0 - 37bfe000
Zone ranges:
  DMA      [mem 0x00010000-0x00ffffff]
  Normal   [mem 0x01000000-0x37bfdfff]
  HighMem  [mem 0x37bfe000-0x5ffeffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00010000-0x0009efff]
  node   0: [mem 0x00100000-0x5ffeffff]
On node 0 totalpages: 393087
free_area_init_node: node 0, pgdat c16eaac0, node_mem_map f6ffd200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 1752 pages used for memmap
  Normal zone: 222502 pages, LIFO batch:31
  HighMem zone: 1288 pages used for memmap
  HighMem zone: 163562 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
e820: [mem 0x60000000-0xfebfffff] available for PCI devices
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 12 pages/cpu @f6fdc000 s26688 r0 d22464 u49152
pcpu-alloc: s26688 r0 d22464 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 390015
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.7.3-ext73-f1-22.0-k8-ags-cfs root=UUID=ca62dd11-2c07-4c99-b855-bf9370731ed6 ro vga=normal rootdelay=120 combined_mode=ide combined_mode=libata enable_atapi=1 init=/sbin/e4rat-preload pcie_aspm=force acpi_osi=Linux acpi_enforce_resources=lax
PCIe ASPM is forcibly enabled
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
__ex_table already sorted, skipping sort
Initializing CPU#0
Initializing HighMem for node 0 (00037bfe:0005fff0)
Memory: 1530824k/1572800k available (5554k kernel code, 41524k reserved, 1554k data, 436k init, 659400k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff17000 - 0xfffff000   ( 928 kB)
    pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
    vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
      .init : 0xc16f2000 - 0xc175f000   ( 436 kB)
      .data : 0xc156ca63 - 0xc16f13c0   (1554 kB)
      .text : 0xc1000000 - 0xc156ca63   (5554 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptible hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	Dump stacks of tasks blocking RCU-preempt GP.
	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
NR_IRQS:2304 nr_irqs:512 16
CPU 0 irqstacks, hard=f5408000 soft=f540a000
Console: colour VGA+ 80x25
console [tty0] enabled
tsc: Fast TSC calibration using PIT
tsc: Detected 3059.120 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6118.24 BogoMIPS (lpj=3059120)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Mount-cache hash table entries: 512
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64
tlb_flushall_shift: 6
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20120913
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Pentium(R) 4 CPU 3.06GHz (fam: 0f, model: 02, stepping: 09)
Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
... version:                0
... bit width:              40
... generic registers:      18
... value mask:             000000ffffffffff
... max period:             0000007fffffffff
... fixed-purpose events:   0
... event mask:             000000000003ffff
CPU 1 irqstacks, hard=f5472000 soft=f5474000
smpboot: Booting Node   0, Processors  #1 OK
Initializing CPU#1
Brought up 2 CPUs
smpboot: Total of 2 processors activated (12234.45 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x5fff0000-0x5fff2fff] (12288 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb290, last bus=1
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x60000000-0xfebfffff] (ignored)
PCI: root bus 00: using default resources
pci_root PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
pci 0000:00:00.0: [1106:3168] type 00 class 0x060000
pci 0000:00:00.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
pci 0000:00:01.0: [1106:b168] type 01 class 0x060400
pci 0000:00:01.0: supports D1
pci 0000:00:0c.0: [10ec:8139] type 00 class 0x020000
pci 0000:00:0c.0: reg 10: [io  0xd000-0xd0ff]
pci 0000:00:0c.0: reg 14: [mem 0xe4000000-0xe40000ff]
pci 0000:00:0c.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:00:0c.0: supports D1 D2
pci 0000:00:0c.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.0: reg 20: [io  0xd400-0xd41f]
pci 0000:00:10.0: supports D1 D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.1: reg 20: [io  0xd800-0xd81f]
pci 0000:00:10.1: supports D1 D2
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.2: reg 20: [io  0xdc00-0xdc1f]
pci 0000:00:10.2: supports D1 D2
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.3: [1106:3104] type 00 class 0x0c0320
pci 0000:00:10.3: reg 10: [mem 0xe4001000-0xe40010ff]
pci 0000:00:10.3: supports D1 D2
pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:11.0: [1106:3177] type 00 class 0x060100
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:11.0: quirk: [io  0x0400-0x047f] claimed by vt8235 PM
pci 0000:00:11.0: quirk: [io  0x0500-0x050f] claimed by vt8235 SMB
pci 0000:00:11.1: [1106:0571] type 00 class 0x01018a
pci 0000:00:11.1: reg 20: [io  0xe000-0xe00f]
pci 0000:00:11.5: [1106:3059] type 00 class 0x040100
pci 0000:00:11.5: reg 10: [io  0xe400-0xe4ff]
pci 0000:00:11.5: supports D1 D2
pci 0000:01:00.0: [10de:02e2] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xe0ffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff pref]
pci 0000:01:00.0: reg 18: [mem 0xe1000000-0xe1ffffff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe2ffffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
 pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
 pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x5fff0000-0x5fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
Switching to clocksource refined-jiffies
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [bus 00-ff]
pnp 00:01: [io  0x0cf8-0x0cff]
pnp 00:01: [io  0x0000-0x0cf7 window]
pnp 00:01: [io  0x0d00-0xffff window]
pnp 00:01: [io  0x0400-0x047f]
pnp 00:01: [io  0x0500-0x050f]
pnp 00:01: [mem 0x000a0000-0x000bffff window]
pnp 00:01: [mem 0x000c0000-0x000dffff window]
pnp 00:01: [mem 0x60000000-0xfebfffff window]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:02: [io  0x0010-0x001f]
pnp 00:02: [io  0x0022-0x003f]
pnp 00:02: [io  0x0044-0x005f]
pnp 00:02: [io  0x0062-0x0063]
pnp 00:02: [io  0x0065-0x006f]
pnp 00:02: [io  0x0074-0x007f]
pnp 00:02: [io  0x0091-0x0093]
pnp 00:02: [io  0x00a2-0x00bf]
pnp 00:02: [io  0x00e0-0x00ef]
pnp 00:02: [io  0x04d0-0x04d1]
pnp 00:02: [io  0x0294-0x0297]
system 00:02: [io  0x04d0-0x04d1] has been reserved
system 00:02: [io  0x0294-0x0297] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io  0x0000-0x000f]
pnp 00:03: [io  0x0080-0x0090]
pnp 00:03: [io  0x0094-0x009f]
pnp 00:03: [io  0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [io  0x0070-0x0073]
pnp 00:04: [irq 8]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io  0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io  0x00f0-0x00ff]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io  0x03f2-0x03f5]
pnp 00:07: [io  0x03f7]
pnp 00:07: [irq 6]
pnp 00:07: [dma 2]
pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:08: [io  0x03f8-0x03ff]
pnp 00:08: [irq 4]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: [io  0x02f8-0x02ff]
pnp 00:09: [irq 3]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: [io  0x0378-0x037f]
pnp 00:0a: [io  0x0778-0x077b]
pnp 00:0a: [irq 7]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:0b: [io  0x0060]
pnp 00:0b: [io  0x0064]
pnp 00:0b: [irq 1]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:0c: [io  0x0201-0x0207]
pnp 00:0c: [io  0x0200]
pnp 00:0c: Plug and Play ACPI device, IDs PNPb02f (active)
pnp 00:0d: [io  0x0330-0x0331]
pnp 00:0d: [irq 10]
pnp 00:0d: Plug and Play ACPI device, IDs PNPb006 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
Switching to clocksource acpi_pm
pci 0000:00:0c.0: BAR 6: assigned [mem 0x60000000-0x6000ffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xe2000000-0xe201ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe2ffffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff pref]
pci 0000:00:01.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe2ffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: disabling DAC on VIA PCI bridge
ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 20304k freed
microcode: CPU0 sig=0xf29, pf=0x4, revision=0x0
microcode: CPU1 sig=0xf29, pf=0x4, revision=0x0
microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
audit: initializing netlink socket (disabled)
type=2000 audit(1360329188.782:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 1741
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Fan [FAN] (on)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (46 C)
Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
scsi0 : pata_acpi
scsi1 : pata_acpi
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.3: irq 21, io mem 0xe4001000
ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d800
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000dc00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: [email protected]
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Key type dns_resolver registered
Using IPI No-Shortcut mode
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:04: setting system clock to 2013-02-08 13:13:09 UTC (1360329189)
ALSA device list:
  No soundcards found.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
ata1.00: ATAPI: HL-DT-STDVD-RAM GH22NP21, 1.00, max UDMA/66
ata1.01: ATAPI: ATAPI   DVD D  DH16D2P, HP56, max UDMA/33
ata1.00: configured for UDMA/66
ata1.01: configured for UDMA/33
scsi 0:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GH22NP21 1.00 PQ: 0 ANSI: 5
scsi 0:0:0:0: Attached scsi generic sg0 type 5
ACPI: Invalid Power Resource to register!
scsi 0:0:1:0: CD-ROM            ATAPI    DVD D  DH16D2P   HP56 PQ: 0 ANSI: 5
scsi 0:0:1:0: Attached scsi generic sg1 type 5
usb 2-1: new low-speed USB device number 2 using uhci_hcd
ata2.01: ATA-6: ST3120022A, 3.06, max UDMA/100
ata2.01: 234441648 sectors, multi 16: LBA48
ata2.01: configured for UDMA/100
scsi 1:0:1:0: Direct-Access     ATA      ST3120022A       3.06 PQ: 0 ANSI: 5
ACPI: Invalid Power Resource to register!
sd 1:0:1:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 1:0:1:0: Attached scsi generic sg2 type 0
sd 1:0:1:0: [sda] Write Protect is off
sd 1:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 1:0:1:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 436k freed
Write protecting the kernel text: 5556k
Write protecting the kernel read-only data: 1288k
udevd[94]: starting version 175
8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:00:0c.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
8139too: 8139too Fast Ethernet driver 0.9.28
8139too 0000:00:0c.0 eth0: RealTek RTL8139 at 0x0001d000, 00:e0:52:a8:d5:f3, IRQ 18
agpgart: Detected VIA PT800 chipset
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input4
hid-generic 0003:046D:C05B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:10.0-1/input0
tsc: Refined TSC clocksource calibration: 3058.901 MHz
Switching to clocksource tsc
agpgart-via 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
sr 0:0:1:0: Attached scsi CD-ROM sr1
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
udevd[342]: starting version 175
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 23
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
gameport gameport0: NS558 PnP Gameport is pnp00:0c/gameport0, io 0x201, speed 745kHz
ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
snd_via82xx 0000:00:11.5: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
ACPI: Invalid Power Resource to register!
NVRM: loading NVIDIA UNIX x86 Kernel Module  304.64  Tue Oct 30 11:09:29 PDT 2012
type=1400 audit(1360329201.599:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=518 comm="apparmor_parser"
type=1400 audit(1360329201.599:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=518 comm="apparmor_parser"
type=1400 audit(1360329201.599:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=518 comm="apparmor_parser"
type=1400 audit(1360329201.791:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=716 comm="apparmor_parser"
type=1400 audit(1360329201.791:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=716 comm="apparmor_parser"
type=1400 audit(1360329201.791:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=716 comm="apparmor_parser"
e4rat-preload: udev-fallback-graphics main process (814) terminated with status 1
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
e4rat-preload: failsafe main process (860) killed by TERM signal
8139too 0000:00:0c.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
microcode: CPU0 updated to revision 0x2e, date = 2004-08-11
microcode: CPU1 updated to revision 0x2e, date = 2004-08-11
NET: Registered protocol family 17le: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Key type dns_resolver registered
Using IPI No-Shortcut mode
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:04: setting system clock to 2013-02-08 13:13:09 UTC (1360329189)
ALSA device list:
  No soundcards found.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
ata1.00: ATAPI: HL-DT-STDVD-RAM GH22NP21, 1.00, max UDMA/66
ata1.01: ATAPI: ATAPI   DVD D  DH16D2P, HP56, max UDMA/33
ata1.00: configured for UDMA/66
ata1.01: configured for UDMA/33
scsi 0:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GH22NP21 1.00 PQ: 0 ANSI: 5
scsi 0:0:0:0: Attached scsi generic sg0 type 5
ACPI: Invalid Power Resource to register!
scsi 0:0:1:0: CD-ROM            ATAPI    DVD D  DH16D2P   HP56 PQ: 0 ANSI: 5
scsi 0:0:1:0: Attached scsi generic sg1 type 5
usb 2-1: new low-speed USB device number 2 using uhci_hcd
ata2.01: ATA-6: ST3120022A, 3.06, max UDMA/100
ata2.01: 234441648 sectors, multi 16: LBA48
ata2.01: configured for UDMA/100
scsi 1:0:1:0: Direct-Access     ATA      ST3120022A       3.06 PQ: 0 ANSI: 5
ACPI: Invalid Power Resource to register!
sd 1:0:1:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 1:0:1:0: Attached scsi generic sg2 type 0
sd 1:0:1:0: [sda] Write Protect is off
sd 1:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 1:0:1:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 436k freed
Write protecting the kernel text: 5556k
Write protecting the kernel read-only data: 1288k
udevd[94]: starting version 175
8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:00:0c.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
8139too: 8139too Fast Ethernet driver 0.9.28
8139too 0000:00:0c.0 eth0: RealTek RTL8139 at 0x0001d000, 00:e0:52:a8:d5:f3, IRQ 18
agpgart: Detected VIA PT800 chipset
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input4
hid-generic 0003:046D:C05B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:10.0-1/input0
tsc: Refined TSC clocksource calibration: 3058.901 MHz
Switching to clocksource tsc
agpgart-via 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
sr 0:0:1:0: Attached scsi CD-ROM sr1
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
udevd[342]: starting version 175
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 23
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
gameport gameport0: NS558 PnP Gameport is pnp00:0c/gameport0, io 0x201, speed 745kHz
ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
snd_via82xx 0000:00:11.5: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
ACPI: Invalid Power Resource to register!
NVRM: loading NVIDIA UNIX x86 Kernel Module  304.64  Tue Oct 30 11:09:29 PDT 2012
type=1400 audit(1360329201.599:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=518 comm="apparmor_parser"
type=1400 audit(1360329201.599:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=518 comm="apparmor_parser"
type=1400 audit(1360329201.599:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=518 comm="apparmor_parser"
type=1400 audit(1360329201.791:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=716 comm="apparmor_parser"
type=1400 audit(1360329201.791:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=716 comm="apparmor_parser"
type=1400 audit(1360329201.791:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=716 comm="apparmor_parser"
e4rat-preload: udev-fallback-graphics main process (814) terminated with status 1
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
e4rat-preload: failsafe main process (860) killed by TERM signal
8139too 0000:00:0c.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
microcode: CPU0 updated to revision 0x2e, date = 2004-08-11
microcode: CPU1 updated to revision 0x2e, date = 2004-08-11
NET: Registered protocol family 17