Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.14.4-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.0 20140507 (prerelease) (GCC) ) #1 SMP PREEMPT Tue May 13 16:41:39 CEST 2014
- [ 0.000000] Command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sdb5 rw nolapic initrd=../initramfs-linux.img
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffb7fff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000bffb8000-0x00000000bffbffff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000bffc0000-0x00000000bffcdfff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x00000000bffce000-0x00000000bfffffff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] SMBIOS 2.5 present.
- [ 0.000000] DMI: ASUSTeK Computer Inc. N70SV/N70SV , BIOS 206 05/08/2009
- [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] No AGP bridge found
- [ 0.000000] e820: last_pfn = 0xbffb8 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-CFFFF write-protect
- [ 0.000000] D0000-EFFFF uncachable
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask F00000000 write-back
- [ 0.000000] 1 base 100000000 mask FC0000000 write-back
- [ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
- [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
- [ 0.000000] Scanning 1 areas for low memory corruption
- [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
- [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
- [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
- [ 0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
- [ 0.000000] BRK [0x01b3a000, 0x01b3afff] PGTABLE
- [ 0.000000] BRK [0x01b3b000, 0x01b3bfff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0xbfc00000-0xbfdfffff]
- [ 0.000000] [mem 0xbfc00000-0xbfdfffff] page 2M
- [ 0.000000] BRK [0x01b3c000, 0x01b3cfff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0xbc000000-0xbfbfffff]
- [ 0.000000] [mem 0xbc000000-0xbfbfffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x80000000-0xbbffffff]
- [ 0.000000] [mem 0x80000000-0xbbffffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x00100000-0x7fffffff]
- [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
- [ 0.000000] [mem 0x00200000-0x7fffffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0xbfe00000-0xbffb7fff]
- [ 0.000000] [mem 0xbfe00000-0xbffb7fff] page 4k
- [ 0.000000] BRK [0x01b3d000, 0x01b3dfff] PGTABLE
- [ 0.000000] RAMDISK: [mem 0x7fd04000-0x7fffffff]
- [ 0.000000] ACPI: RSDP 00000000000fa220 000014 (v00 ACPIAM)
- [ 0.000000] ACPI: RSDT 00000000bffc0000 00004C (v01 _ASUS_ Notebook 20090508 MSFT 00000097)
- [ 0.000000] ACPI: FACP 00000000bffc0200 000084 (v01 050809 FACP1804 20090508 MSFT 00000097)
- [ 0.000000] ACPI: DSDT 00000000bffc0690 0093C9 (v01 N70SV N70SV001 00000001 INTL 20051117)
- [ 0.000000] ACPI: FACS 00000000bffce000 000040
- [ 0.000000] ACPI: APIC 00000000bffc0390 00006C (v01 050809 APIC1804 20090508 MSFT 00000097)
- [ 0.000000] ACPI: MCFG 00000000bffc0440 00003C (v01 050809 OEMMCFG 20090508 MSFT 00000097)
- [ 0.000000] ACPI: SLIC 00000000bffc0480 000176 (v01 _ASUS_ Notebook 20090508 MSFT 00000097)
- [ 0.000000] ACPI: ECDT 00000000bffc0630 000055 (v01 050809 OEMECDT 20090508 MSFT 00000097)
- [ 0.000000] ACPI: DBGP 00000000bffc0400 000034 (v01 050809 DBGP1804 20090508 MSFT 00000097)
- [ 0.000000] ACPI: BOOT 00000000bffc0600 000028 (v01 050809 BOOT1804 20090508 MSFT 00000097)
- [ 0.000000] ACPI: OEMB 00000000bffce040 000071 (v01 050809 OEMB1804 20090508 MSFT 00000097)
- [ 0.000000] ACPI: HPET 00000000bffc9a60 000038 (v01 050809 OEMHPET 20090508 MSFT 00000097)
- [ 0.000000] ACPI: SSDT 00000000bffceb60 0004E6 (v01 PmRef CpuPm 00003000 INTL 20051117)
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000bffb7fff]
- [ 0.000000] Initmem setup node 0 [mem 0x00000000-0xbffb7fff]
- [ 0.000000] NODE_DATA [mem 0xbffb3000-0xbffb7fff]
- [ 0.000000] [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bc400000-ffff8800bf3fffff] on node 0
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
- [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00001000-0x0009efff]
- [ 0.000000] node 0: [mem 0x00100000-0xbffb7fff]
- [ 0.000000] On node 0 totalpages: 786262
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 21 pages reserved
- [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 12223 pages used for memmap
- [ 0.000000] DMA32 zone: 782264 pages, LIFO batch:31
- [ 0.000000] ACPI: PM-Timer IO Port: 0x808
- [ 0.000000] ACPI: HPET id: 0x10398201 base: 0xfed00000
- [ 0.000000] Intel MultiProcessor Specification v1.4
- [ 0.000000] MPTABLE: OEM ID: ASUSTeK
- [ 0.000000] MPTABLE: Product ID: ETEMPLATE
- [ 0.000000] MPTABLE: APIC at: 0xFEE00000
- [ 0.000000] Processor #0 (Bootup-CPU)
- [ 0.000000] Processor #1
- [ 0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
- [ 0.000000] Processors: 2
- [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
- [ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff8800bfa00000 s87040 r8192 d23552 u1048576
- [ 0.000000] pcpu-alloc: s87040 r8192 d23552 u1048576 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1
- [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 773954
- [ 0.000000] Policy zone: DMA32
- [ 0.000000] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sdb5 rw nolapic initrd=../initramfs-linux.img
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.000000] Memory: 3080736K/3145048K available (5230K kernel code, 857K rwdata, 1632K rodata, 1120K init, 1288K bss, 64312K reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
- [ 0.000000] NR_IRQS:8448 nr_irqs:512 16
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] allocated 12582912 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] hpet clockevent registered
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.000000] tsc: Detected 2532.721 MHz processor
- [ 0.003356] Calibrating delay loop (skipped), value calculated using timer frequency.. 5067.50 BogoMIPS (lpj=8442403)
- [ 0.003360] pid_max: default: 32768 minimum: 301
- [ 0.003380] ACPI: Core revision 20131218
- [ 0.008155] ACPI: All ACPI Tables successfully acquired
- [ 0.008160] ACPI: setting ELCR to 0200 (from 8cb8)
- [ 0.010030] Security Framework initialized
- [ 0.010047] Yama: becoming mindful.
- [ 0.010486] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.017197] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.020178] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.020191] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.020793] Initializing cgroup subsys memory
- [ 0.020809] Initializing cgroup subsys devices
- [ 0.020813] Initializing cgroup subsys freezer
- [ 0.020817] Initializing cgroup subsys net_cls
- [ 0.020820] Initializing cgroup subsys blkio
- [ 0.020868] CPU: Physical Processor ID: 0
- [ 0.020870] CPU: Processor Core ID: 0
- [ 0.020873] mce: CPU supports 6 MCE banks
- [ 0.020898] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
- Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
- tlb_flushall_shift: -1
- [ 0.021032] Freeing SMP alternatives memory: 20K (ffffffff819f0000 - ffffffff819f5000)
- [ 0.022159] ftrace: allocating 20029 entries in 79 pages
- [ 0.033390] smpboot: SMP disabled
- [ 0.033410] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events,
- [ 0.033417] no APIC, boot with the "lapic" boot parameter to force-enable it.
- [ 0.033419] no hardware sampling interrupt available.
- [ 0.033421] Intel PMU driver.
- [ 0.033424] ... version: 2
- [ 0.033426] ... bit width: 40
- [ 0.033427] ... generic registers: 2
- [ 0.033428] ... value mask: 000000ffffffffff
- [ 0.033429] ... max period: 000000007fffffff
- [ 0.033431] ... fixed-purpose events: 3
- [ 0.033432] ... event mask: 0000000700000003
- [ 0.053338] x86: Booted up 1 node, 1 CPUs
- [ 0.053341] smpboot: Total of 1 processors activated (5067.50 BogoMIPS)
- [ 0.053442] NMI watchdog: disabled (cpu0): not supported (no LAPIC?)
- [ 0.053536] devtmpfs: initialized
- [ 0.057004] PM: Registering ACPI NVS region [mem 0xbffb8000-0xbffbffff] (32768 bytes)
- [ 0.057006] PM: Registering ACPI NVS region [mem 0xbffce000-0xbfffffff] (204800 bytes)
- [ 0.058134] pinctrl core: initialized pinctrl subsystem
- [ 0.058170] RTC time: 10:39:51, date: 05/30/14
- [ 0.058219] NET: Registered protocol family 16
- [ 0.058327] cpuidle: using governor ladder
- [ 0.058329] cpuidle: using governor menu
- [ 0.058347] ACPI: bus type PCI registered
- [ 0.058349] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 0.058427] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.058430] PCI: not using MMCONFIG
- [ 0.058431] PCI: Using configuration type 1 for base access
- [ 0.059228] bio: create slab <bio-0> at 0
- [ 0.059309] ACPI: Added _OSI(Module Device)
- [ 0.059311] ACPI: Added _OSI(Processor Device)
- [ 0.059312] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.059314] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.060460] ACPI : EC: EC description table is found, configuring boot EC
- [ 0.061711] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.066858] ACPI: SSDT 00000000bffce390 0001C0 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
- [ 0.067140] ACPI: Dynamic OEM Table Load:
- [ 0.067142] ACPI: SSDT (null) 0001C0 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
- [ 0.067240] ACPI: SSDT 00000000bffce5e0 00057D (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
- [ 0.067510] ACPI: Dynamic OEM Table Load:
- [ 0.067512] ACPI: SSDT (null) 00057D (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
- [ 0.067660] ACPI: Interpreter enabled
- [ 0.067668] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
- [ 0.067672] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
- [ 0.067687] ACPI: (supports S0 S3 S4 S5)
- [ 0.067689] ACPI: Using PIC for interrupt routing
- [ 0.068092] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.068530] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
- [ 0.085913] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.086016] ACPI: No dock devices found.
- [ 0.091203] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.091210] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
- [ 0.091347] acpi PNP0A03:00: _OSC: platform does not support [PME]
- [ 0.091469] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability]
- [ 0.091724] PCI host bridge to bus 0000:00
- [ 0.091727] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 0.091729] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
- [ 0.091731] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
- [ 0.091734] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- [ 0.091736] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
- [ 0.091738] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
- [ 0.091740] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
- [ 0.091750] pci 0000:00:00.0: [1039:0671] type 00 class 0x060000
- [ 0.091858] pci 0000:00:01.0: [1039:0004] type 01 class 0x060400
- [ 0.091930] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- [ 0.092006] pci 0000:00:02.0: [1039:0968] type 00 class 0x060100
- [ 0.092132] pci 0000:00:02.5: [1039:5513] type 00 class 0x010180
- [ 0.092175] pci 0000:00:02.5: reg 0x20: [io 0xffe0-0xffef]
- [ 0.092216] pci 0000:00:02.5: PME# supported from D3cold
- [ 0.092291] pci 0000:00:03.0: [1039:7001] type 00 class 0x0c0310
- [ 0.092304] pci 0000:00:03.0: reg 0x10: [mem 0xf9fff000-0xf9ffffff]
- [ 0.092377] pci 0000:00:03.0: System wakeup disabled by ACPI
- [ 0.092425] pci 0000:00:03.1: [1039:7001] type 00 class 0x0c0310
- [ 0.092437] pci 0000:00:03.1: reg 0x10: [mem 0xf9ffe000-0xf9ffefff]
- [ 0.092511] pci 0000:00:03.1: System wakeup disabled by ACPI
- [ 0.092561] pci 0000:00:03.3: [1039:7002] type 00 class 0x0c0320
- [ 0.092576] pci 0000:00:03.3: reg 0x10: [mem 0xf9ffd000-0xf9ffdfff]
- [ 0.092641] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
- [ 0.092672] pci 0000:00:03.3: System wakeup disabled by ACPI
- [ 0.092725] pci 0000:00:04.0: [1039:0191] type 00 class 0x020000
- [ 0.092740] pci 0000:00:04.0: reg 0x10: [mem 0xf9ffcc00-0xf9ffcc7f]
- [ 0.092749] pci 0000:00:04.0: reg 0x14: [io 0xcc00-0xcc7f]
- [ 0.092808] pci 0000:00:04.0: supports D1 D2
- [ 0.092810] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.092839] pci 0000:00:04.0: System wakeup disabled by ACPI
- [ 0.092888] pci 0000:00:05.0: [1039:1183] type 00 class 0x01018f
- [ 0.092903] pci 0000:00:05.0: reg 0x10: [io 0xc800-0xc807]
- [ 0.092912] pci 0000:00:05.0: reg 0x14: [io 0xc400-0xc403]
- [ 0.092921] pci 0000:00:05.0: reg 0x18: [io 0xc000-0xc007]
- [ 0.092930] pci 0000:00:05.0: reg 0x1c: [io 0xbc00-0xbc03]
- [ 0.092939] pci 0000:00:05.0: reg 0x20: [io 0xb800-0xb80f]
- [ 0.092947] pci 0000:00:05.0: reg 0x24: [io 0xb400-0xb47f]
- [ 0.092980] pci 0000:00:05.0: PME# supported from D3cold
- [ 0.093010] pci 0000:00:05.0: System wakeup disabled by ACPI
- [ 0.093063] pci 0000:00:06.0: [1039:000a] type 01 class 0x060400
- [ 0.093139] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
- [ 0.093175] pci 0000:00:06.0: System wakeup disabled by ACPI
- [ 0.093231] pci 0000:00:07.0: [1039:000a] type 01 class 0x060400
- [ 0.093308] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
- [ 0.093353] pci 0000:00:07.0: System wakeup disabled by ACPI
- [ 0.093410] pci 0000:00:0f.0: [1039:7502] type 00 class 0x040300
- [ 0.093426] pci 0000:00:0f.0: reg 0x10: [mem 0xf9ff4000-0xf9ff7fff]
- [ 0.093492] pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold
- [ 0.093525] pci 0000:00:0f.0: System wakeup disabled by ACPI
- [ 0.093670] pci 0000:01:00.0: [10de:0652] type 00 class 0x030000
- [ 0.093687] pci 0000:01:00.0: reg 0x10: [mem 0xfc000000-0xfcffffff]
- [ 0.093704] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.093721] pci 0000:01:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit]
- [ 0.093733] pci 0000:01:00.0: reg 0x24: [io 0xdc00-0xdc7f]
- [ 0.093744] pci 0000:01:00.0: reg 0x30: [mem 0xfde80000-0xfdefffff pref]
- [ 0.100016] pci 0000:00:01.0: PCI bridge to [bus 01]
- [ 0.100022] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
- [ 0.100026] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfdefffff]
- [ 0.100032] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.100128] pci 0000:02:00.0: [168c:002a] type 00 class 0x028000
- [ 0.100156] pci 0000:02:00.0: reg 0x10: [mem 0xfdff0000-0xfdffffff 64bit]
- [ 0.100308] pci 0000:02:00.0: supports D1
- [ 0.100310] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
- [ 0.100385] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
- [ 0.100395] pci 0000:00:06.0: PCI bridge to [bus 02]
- [ 0.100403] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff]
- [ 0.100473] pci 0000:00:07.0: PCI bridge to [bus 03-06]
- [ 0.100479] pci 0000:00:07.0: bridge window [io 0xe000-0xefff]
- [ 0.100483] pci 0000:00:07.0: bridge window [mem 0xfe000000-0xfebfffff]
- [ 0.100490] pci 0000:00:07.0: bridge window [mem 0xf6000000-0xf8ffffff 64bit pref]
- [ 0.100707] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15)
- [ 0.100762] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 12 14 15)
- [ 0.100814] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 7 10 11 12 14 15)
- [ 0.100867] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *7 10 11 12 14 15)
- [ 0.100918] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 14 15)
- [ 0.100970] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 *15)
- [ 0.101022] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 7 10 11 12 14 15)
- [ 0.101074] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
- [ 0.101131] ACPI: Enabled 1 GPEs in block 00 to 0F
- [ 0.101136] ACPI: Enabled 1 GPEs in block 10 to 1F
- [ 0.101211] ACPI : EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
- [ 0.101323] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.101325] vgaarb: loaded
- [ 0.101326] vgaarb: bridge control possible 0000:01:00.0
- [ 0.101365] PCI: Using ACPI for IRQ routing
- [ 0.109496] PCI: pci_cache_line_size set to 64 bytes
- [ 0.109535] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
- [ 0.109538] e820: reserve RAM buffer [mem 0xbffb8000-0xbfffffff]
- [ 0.109672] NetLabel: Initializing
- [ 0.109673] NetLabel: domain hash size = 128
- [ 0.109674] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.109692] NetLabel: unlabeled traffic allowed by default
- [ 0.109710] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- [ 0.109713] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 0.109717] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
- [ 0.111064] Switched to clocksource hpet
- [ 0.120314] pnp: PnP ACPI init
- [ 0.120356] ACPI: bus type PNP registered
- [ 0.120444] pnp 00:00: [dma 4]
- [ 0.120483] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.120578] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
- [ 0.120639] pnp 00:02: Plug and Play ACPI device, IDs SYN0a06 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
- [ 0.120677] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
- [ 0.120708] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.120919] system 00:05: [io 0x0290-0x0297] has been reserved
- [ 0.120922] system 00:05: [io 0x0c00-0x0c05] has been reserved
- [ 0.120925] system 00:05: [io 0x0d00-0x0d05] has been reserved
- [ 0.120927] system 00:05: [io 0x0480-0x048f] has been reserved
- [ 0.120930] system 00:05: [io 0x04d0-0x04d1] has been reserved
- [ 0.120932] system 00:05: [io 0x0800-0x087f] could not be reserved
- [ 0.120934] system 00:05: [io 0x0880-0x08ff] has been reserved
- [ 0.120937] system 00:05: [io 0x0c00-0x0c7f] could not be reserved
- [ 0.120939] system 00:05: [io 0x2000-0x20fe] has been reserved
- [ 0.120942] system 00:05: [mem 0xfff80000-0xffffffff] has been reserved
- [ 0.120945] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved
- [ 0.120947] system 00:05: [mem 0xffee0000-0xffefffff] has been reserved
- [ 0.120949] system 00:05: [mem 0xfed10000-0xfed3ffff] has been reserved
- [ 0.120953] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.121024] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 0.121073] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.121147] system 00:08: [io 0x0250-0x0253] has been reserved
- [ 0.121150] system 00:08: [io 0x0256-0x025f] has been reserved
- [ 0.121153] system 00:08: [mem 0xfec00000-0xfec00fff] has been reserved
- [ 0.121155] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
- [ 0.121158] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.121257] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.121260] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.121485] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
- [ 0.121488] system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved
- [ 0.121490] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
- [ 0.121493] system 00:0a: [mem 0x00100000-0xbfffffff] could not be reserved
- [ 0.121495] system 00:0a: [mem 0xe0000000-0xffffffff] could not be reserved
- [ 0.121498] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.121620] pnp: PnP ACPI: found 11 devices
- [ 0.121622] ACPI: bus type PNP unregistered
- [ 0.128525] pci 0000:00:01.0: PCI bridge to [bus 01]
- [ 0.128530] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
- [ 0.128536] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfdefffff]
- [ 0.128540] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.128546] pci 0000:00:06.0: PCI bridge to [bus 02]
- [ 0.128551] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff]
- [ 0.128559] pci 0000:00:07.0: PCI bridge to [bus 03-06]
- [ 0.128562] pci 0000:00:07.0: bridge window [io 0xe000-0xefff]
- [ 0.128567] pci 0000:00:07.0: bridge window [mem 0xfe000000-0xfebfffff]
- [ 0.128571] pci 0000:00:07.0: bridge window [mem 0xf6000000-0xf8ffffff 64bit pref]
- [ 0.128578] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.128580] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 0.128583] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.128585] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
- [ 0.128587] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
- [ 0.128589] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
- [ 0.128592] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
- [ 0.128594] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfdefffff]
- [ 0.128596] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.128598] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
- [ 0.128601] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
- [ 0.128603] pci_bus 0000:03: resource 1 [mem 0xfe000000-0xfebfffff]
- [ 0.128605] pci_bus 0000:03: resource 2 [mem 0xf6000000-0xf8ffffff 64bit pref]
- [ 0.128655] NET: Registered protocol family 2
- [ 0.128885] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
- [ 0.129227] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
- [ 0.129809] TCP: Hash tables configured (established 32768 bind 32768)
- [ 0.129918] TCP: reno registered
- [ 0.129928] UDP hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.130023] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.130169] NET: Registered protocol family 1
- [ 0.130372] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
- [ 0.130375] PCI: setting IRQ 5 as level-triggered
- [ 0.216864] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 15
- [ 0.216867] PCI: setting IRQ 15 as level-triggered
- [ 0.293525] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 3
- [ 0.293527] PCI: setting IRQ 3 as level-triggered
- [ 0.293632] pci 0000:01:00.0: Boot video device
- [ 0.293639] PCI: CLS 32 bytes, default 64
- [ 0.293729] Unpacking initramfs...
- [ 0.360916] Freeing initrd memory: 3056K (ffff88007fd04000 - ffff880080000000)
- [ 0.360965] Simple Boot Flag at 0x71 set to 0x1
- [ 0.361144] Scanning for low memory corruption every 60 seconds
- [ 0.361577] futex hash table entries: 256 (order: 2, 16384 bytes)
- [ 0.374651] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.376550] zbud: loaded
- [ 0.376713] VFS: Disk quotas dquot_6.5.2
- [ 0.376768] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.376946] msgmni has been set to 6023
- [ 0.377024] Key type big_key registered
- [ 0.377205] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 0.377235] io scheduler noop registered
- [ 0.377237] io scheduler deadline registered
- [ 0.377277] io scheduler cfq registered (default)
- [ 0.377530] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.377547] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 0.377593] intel_idle: does not run on family 6 model 23
- [ 0.377654] GHES: HEST is not enabled!
- [ 0.377719] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 0.378231] Linux agpgart interface v0.103
- [ 0.378270] rtc_cmos 00:07: RTC can wake from S4
- [ 0.378390] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
- [ 0.378413] rtc_cmos 00:07: alarms up to one year, 114 bytes nvram, hpet irqs
- [ 0.378425] ledtrig-cpu: registered to indicate activity on CPUs
- [ 0.378583] TCP: cubic registered
- [ 0.378713] NET: Registered protocol family 10
- [ 0.378966] NET: Registered protocol family 17
- [ 0.379179] registered taskstats version 1
- [ 0.379464] Magic number: 14:440:680
- [ 0.379574] rtc_cmos 00:07: setting system clock to 2014-05-30 10:39:51 UTC (1401446391)
- [ 0.379627] PM: Hibernation image not present or could not be loaded.
- [ 0.381192] Freeing unused kernel memory: 1120K (ffffffff818d8000 - ffffffff819f0000)
- [ 0.381194] Write protecting the kernel read-only data: 8192k
- [ 0.384043] Freeing unused kernel memory: 904K (ffff88000151e000 - ffff880001600000)
- [ 0.385338] Freeing unused kernel memory: 416K (ffff880001798000 - ffff880001800000)
- [ 0.392623] random: systemd-tmpfile urandom read with 2 bits of entropy available
- [ 0.396854] systemd-udevd[41]: starting version 212
- [ 0.417999] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
- [ 0.427017] i8042: Detected active multiplexing controller, rev 1.1
- [ 0.428053] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.431027] SCSI subsystem initialized
- [ 0.437381] ACPI: bus type USB registered
- [ 0.437416] usbcore: registered new interface driver usbfs
- [ 0.437427] usbcore: registered new interface driver hub
- [ 0.440222] usbcore: registered new device driver usb
- [ 0.440823] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.441112] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.441235] ohci-pci: OHCI PCI platform driver
- [ 0.441436] ohci-pci 0000:00:03.0: OHCI PCI host controller
- [ 0.441446] ohci-pci 0000:00:03.0: new USB bus registered, assigned bus number 1
- [ 0.441475] ohci-pci 0000:00:03.0: irq 5, io mem 0xf9fff000
- [ 0.441732] ehci-pci: EHCI PCI platform driver
- [ 0.442111] serio: i8042 AUX0 port at 0x60,0x64 irq 12
- [ 0.442166] serio: i8042 AUX1 port at 0x60,0x64 irq 12
- [ 0.442196] serio: i8042 AUX2 port at 0x60,0x64 irq 12
- [ 0.442226] serio: i8042 AUX3 port at 0x60,0x64 irq 12
- [ 0.446588] libata version 3.00 loaded.
- [ 0.495552] hub 1-0:1.0: USB hub found
- [ 0.495564] hub 1-0:1.0: 4 ports detected
- [ 0.495948] ehci-pci 0000:00:03.3: EHCI Host Controller
- [ 0.495956] ehci-pci 0000:00:03.3: new USB bus registered, assigned bus number 2
- [ 0.495997] ehci-pci 0000:00:03.3: irq 3, io mem 0xf9ffd000
- [ 0.503350] ehci-pci 0000:00:03.3: USB 2.0 started, EHCI 1.00
- [ 0.503501] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
- [ 0.504517] hub 2-0:1.0: USB hub found
- [ 0.504525] hub 2-0:1.0: 8 ports detected
- [ 0.560054] hub 1-0:1.0: USB hub found
- [ 0.560064] hub 1-0:1.0: 4 ports detected
- [ 0.560286] pata_sis 0000:00:02.5: version 0.5.2
- [ 0.561516] scsi0 : pata_sis
- [ 0.561653] scsi1 : pata_sis
- [ 0.561710] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffe0 irq 14
- [ 0.561712] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffe8 irq 15
- [ 0.561831] ohci-pci 0000:00:03.1: OHCI PCI host controller
- [ 0.561838] ohci-pci 0000:00:03.1: new USB bus registered, assigned bus number 3
- [ 0.561857] ohci-pci 0000:00:03.1: irq 15, io mem 0xf9ffe000
- [ 0.615847] hub 3-0:1.0: USB hub found
- [ 0.615857] hub 3-0:1.0: 4 ports detected
- [ 0.616553] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
- [ 0.616555] PCI: setting IRQ 11 as level-triggered
- [ 0.810024] usb 2-1: new high-speed USB device number 2 using ehci-pci
- [ 0.969307] ata1.00: ATA-8: ST9250315AS, 0002SDM1, max UDMA/133
- [ 0.969311] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 1.009413] ata1.00: configured for UDMA/133
- [ 1.009535] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0002 PQ: 0 ANSI: 5
- [ 1.009687] ata2: port disabled--ignoring
- [ 1.009898] sata_sis 0000:00:05.0: version 1.0
- [ 1.010014] sata_sis 0000:00:05.0: Detected SiS 1183/966/966L/968/680 controller in PATA mode
- [ 1.011398] scsi2 : sata_sis
- [ 1.012408] scsi3 : sata_sis
- [ 1.012466] ata3: PATA max UDMA/133 cmd 0xc800 ctl 0xc400 bmdma 0xb800 irq 11
- [ 1.012468] ata4: PATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb808 irq 11
- [ 1.014216] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
- [ 1.014269] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.014272] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.014295] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.046086] sda: sda1
- [ 1.046344] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.106691] usb 2-5: new high-speed USB device number 4 using ehci-pci
- [ 1.227796] ata3.00: ATA-8: ST9250315AS, 0002SDM1, max UDMA/133
- [ 1.227798] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 1.240622] ata3.00: configured for UDMA/133
- [ 1.240696] scsi 2:0:0:0: Direct-Access ATA ST9250315AS 0002 PQ: 0 ANSI: 5
- [ 1.241043] sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
- [ 1.241094] sd 2:0:0:0: [sdb] Write Protect is off
- [ 1.241097] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 1.241119] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.277311] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 > sdb4
- [ 1.278399] sd 2:0:0:0: [sdb] Attached SCSI disk
- [ 1.363351] tsc: Refined TSC clocksource calibration: 2532.613 MHz
- [ 1.416877] ata4.00: ATAPI: TSSTcorp CDDVDW TS-L633A, AS00, max UDMA/100
- [ 1.446879] ata4.00: configured for UDMA/100
- [ 1.451248] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633A AS00 PQ: 0 ANSI: 5
- [ 1.470876] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 1.470881] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 1.471089] sr 3:0:0:0: Attached scsi CD-ROM sr0
- [ 1.813374] usb 3-3: new full-speed USB device number 2 using ohci-pci
- [ 2.167565] random: nonblocking pool is initialized
- [ 2.300034] usb 1-2: new low-speed USB device number 2 using ohci-pci
- [ 2.363489] Switched to clocksource tsc
- [ 2.395537] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
- [ 3.198837] systemd[1]: systemd 212 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
- [ 3.198973] systemd[1]: Detected architecture 'x86-64'.
- [ 3.205462] systemd[1]: No hostname configured.
- [ 3.205468] systemd[1]: Set hostname to <localhost>.
- [ 3.396693] usb 3-2: new full-speed USB device number 3 using ohci-pci
- [ 4.463017] systemd[1]: Starting Login Prompts.
- [ 4.463406] systemd[1]: Reached target Login Prompts.
- [ 4.463417] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
- [ 4.463478] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 4.463487] systemd[1]: Starting Remote File Systems.
- [ 4.463818] systemd[1]: Reached target Remote File Systems.
- [ 4.463841] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
- [ 4.464259] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ 4.464275] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
- [ 4.464306] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 4.464316] systemd[1]: Starting Encrypted Volumes.
- [ 4.464645] systemd[1]: Reached target Encrypted Volumes.
- [ 4.464658] systemd[1]: Expecting device dev-disk-by\x2duuid-f6d6dea1\x2d2052\x2d4878\x2d97c5\x2d09460e481586.device...
- [ 4.464896] systemd[1]: Expecting device dev-disk-by\x2duuid-e00e1a15\x2d8ae8\x2d4555\x2da432\x2d9ad7fe90b7ba.device...
- [ 4.465131] systemd[1]: Starting Root Slice.
- [ 4.470470] systemd[1]: Created slice Root Slice.
- [ 4.470482] systemd[1]: Starting User and Session Slice.
- [ 4.470971] systemd[1]: Created slice User and Session Slice.
- [ 4.470982] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
- [ 4.471330] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ 4.471340] systemd[1]: Starting Delayed Shutdown Socket.
- [ 4.471685] systemd[1]: Listening on Delayed Shutdown Socket.
- [ 4.471695] systemd[1]: Starting Device-mapper event daemon FIFOs.
- [ 4.472041] systemd[1]: Listening on Device-mapper event daemon FIFOs.
- [ 4.472050] systemd[1]: Starting LVM2 metadata daemon socket.
- [ 4.472397] systemd[1]: Listening on LVM2 metadata daemon socket.
- [ 4.472411] systemd[1]: Starting udev Control Socket.
- [ 4.472751] systemd[1]: Listening on udev Control Socket.
- [ 4.472763] systemd[1]: Starting udev Kernel Socket.
- [ 4.473103] systemd[1]: Listening on udev Kernel Socket.
- [ 4.473116] systemd[1]: Starting Journal Socket.
- [ 4.473580] systemd[1]: Listening on Journal Socket.
- [ 4.473596] systemd[1]: Starting System Slice.
- [ 4.474073] systemd[1]: Created slice System Slice.
- [ 4.474089] systemd[1]: Started File System Check on Root Device.
- [ 4.474097] systemd[1]: Starting system-systemd\x2dfsck.slice.
- [ 4.474587] systemd[1]: Created slice system-systemd\x2dfsck.slice.
- [ 4.474598] systemd[1]: Mounting Temporary Directory...
- [ 4.513332] systemd[1]: Starting system-getty.slice.
- [ 4.513878] systemd[1]: Created slice system-getty.slice.
- [ 4.513904] systemd[1]: Starting udev Coldplug all Devices...
- [ 4.536291] systemd[1]: Started Load Kernel Modules.
- [ 4.545330] systemd[1]: Starting Apply Kernel Variables...
- [ 4.546059] systemd[1]: Mounting POSIX Message Queue File System...
- [ 4.546746] systemd[1]: Mounting Configuration File System...
- [ 4.576313] systemd[1]: Starting Create list of required static device nodes for the current kernel...
- [ 4.577125] systemd[1]: Mounted FUSE Control File System.
- [ 4.577173] systemd[1]: Mounting Huge Pages File System...
- [ 4.578662] systemd[1]: Starting Set Up Additional Binary Formats...
- [ 4.579412] systemd[1]: Mounting Debug File System...
- [ 4.580164] systemd[1]: Starting Setup Virtual Console...
- [ 4.580902] systemd[1]: Starting Journal Service...
- [ 4.582594] systemd[1]: Started Journal Service.
- [ 5.080684] EXT4-fs (sdb5): re-mounted. Opts: data=ordered
- [ 5.151659] systemd-udevd[132]: starting version 212
- [ 6.041626] Monitor-Mwait will be used to enter C-1 state
- [ 6.060020] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
- [ 6.060027] ACPI: Power Button [PWRB]
- [ 6.060084] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
- [ 6.060086] ACPI: Sleep Button [SLPB]
- [ 6.060143] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input7
- [ 6.061230] ACPI: Lid Switch [LID]
- [ 6.061287] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
- [ 6.061290] ACPI: Power Button [PWRF]
- [ 6.219226] asus_laptop: Asus Laptop Support version 0.42
- [ 6.220748] asus_laptop: N70SV model detected
- [ 6.223659] asus_laptop: Backlight controlled by ACPI video driver
- [ 6.223715] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input9
- [ 6.267564] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
- [ 6.268422] acpi device:18: registered as cooling_device1
- [ 6.268484] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:15/LNXVIDEO:00/input/input10
- [ 6.274348] ACPI: AC Adapter [AC0] (on-line)
- [ 6.381724] hidraw: raw HID events driver (C) Jiri Kosina
- [ 6.413307] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 6.485052] [drm] Initialized drm 1.1.0 20060810
- [ 6.486582] ACPI: Battery Slot [BAT0] (battery present)
- [ 6.513694] thermal LNXTHERM:00: registered as thermal_zone0
- [ 6.513698] ACPI: Thermal Zone [THRM] (51 C)
- [ 6.693098] sis190: sis190 Gigabit Ethernet driver 1.4 loaded
- [ 6.693309] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 7
- [ 6.693312] PCI: setting IRQ 7 as level-triggered
- [ 6.694337] sis190: 0000:00:04.0: Read MAC address from EEPROM
- [ 6.694339] sis190: 0000:00:04.0: Error EEPROM read 0
- [ 6.694342] sis190: 0000:00:04.0: Read MAC address from APC
- [ 6.733349] sis190: 0000:00:04.0: unknown PHY 0x1c:0xc910 transceiver at address 1
- [ 6.765632] Bluetooth: Core ver 2.18
- [ 6.766423] NET: Registered protocol family 31
- [ 6.766425] Bluetooth: HCI device and connection manager initialized
- [ 6.766438] Bluetooth: HCI socket layer initialized
- [ 6.766441] Bluetooth: L2CAP socket layer initialized
- [ 6.766453] Bluetooth: SCO socket layer initialized
- [ 6.801988] usbcore: registered new interface driver btusb
- [ 6.993410] nvidia: module license 'NVIDIA' taints kernel.
- [ 6.993420] Disabling lock debugging due to kernel taint
- [ 7.030543] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
- [ 7.030550] PCI: setting IRQ 10 as level-triggered
- [ 7.030569] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
- [ 7.032754] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
- [ 7.032761] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 337.19 Tue Apr 29 19:58:58 PDT 2014
- [ 7.163349] sis190: 0000:00:04.0: Using transceiver at address 1 as default
- [ 7.171587] media: Linux media interface: v0.10
- [ 7.190206] sis190 0000:00:04.0 eth0: 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at ffffc90010eb0c00 (IRQ: 7), 00:26:18:5e:d7:bc
- [ 7.190209] sis190 0000:00:04.0 eth0: RGMII mode.
- [ 7.190214] sis190 0000:00:04.0 eth0: Enabling Auto-negotiation
- [ 7.282022] Linux video capture interface: v2.00
- [ 7.454773] uvcvideo: Found UVC 1.00 device USB2.0 UVC 1.3M WebCam (064e:a116)
- [ 7.471344] input: USB2.0 UVC 1.3M WebCam as /devices/pci0000:00/0000:00:03.3/usb2/2-5/2-5:1.0/input/input11
- [ 7.471390] usbcore: registered new interface driver uvcvideo
- [ 7.471392] USB Video Class driver (1.1.1)
- [ 7.511870] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered
- [ 7.636634] asix 2-1:1.0 eth1: register 'asix' at usb-0000:00:03.3-1, ASIX AX88772 USB 2.0 Ethernet, 28:10:7b:9f:50:03
- [ 7.636900] usbcore: registered new interface driver asix
- [ 7.675101] systemd-journald[110]: Received request to flush runtime journal from PID 1
- [ 8.431352] cfg80211: Calling CRDA to update world regulatory domain
- [ 8.802027] Adding 3905532k swap on /dev/sdb6. Priority:-1 extents:1 across:3905532k FS
- [ 9.188136] input: PC Speaker as /devices/platform/pcspkr/input/input14
- [ 9.326027] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 4
- [ 9.326033] PCI: setting IRQ 4 as level-triggered
- [ 9.480587] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa04
- [ 9.491026] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 9.526986] ath: EEPROM regdomain: 0x60
- [ 9.526989] ath: EEPROM indicates we should expect a direct regpair map
- [ 9.526993] ath: Country alpha2 being used: 00
- [ 9.526994] ath: Regpair used: 0x60
- [ 9.570191] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 9.570947] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc90012440000, irq=10
- [ 9.593195] hda_codec: ALC663: SKU not ready 0x598301f0
- [ 9.596480] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0f.0/input/input17
- [ 9.598256] systemd-udevd[143]: renamed network interface eth1 to enp0s3f3u1
- [ 9.623223] input: HDA SIS966 Headphone as /devices/pci0000:00/0000:00:0f.0/sound/card0/input20
- [ 9.625747] input: HDA SIS966 Headphone as /devices/pci0000:00/0000:00:0f.0/sound/card0/input19
- [ 9.625826] input: HDA SIS966 Mic as /devices/pci0000:00/0000:00:0f.0/sound/card0/input18
- [ 9.909033] systemd-udevd[142]: renamed network interface eth0 to enp0s4
- [ 9.960354] systemd-udevd[143]: renamed network interface wlan0 to wlp2s0
- [ 9.994617] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04711/0xa00000/0x20000, board id: 3655, fw id: 528992
- [ 10.033776] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input16
- [ 10.285849] mousedev: PS/2 mouse device common for all mice
- [ 13.718738] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 13.718743] Bluetooth: BNEP filters: protocol multicast
- [ 13.718755] Bluetooth: BNEP socket layer initialized
- [ 17.762506] IPv6: ADDRCONF(NETDEV_UP): enp0s3f3u1: link is not ready
- [ 17.767724] IPv6: ADDRCONF(NETDEV_UP): enp0s4: link is not ready
- [ 18.372768] NVRM: failed to enable MSI,
- using PCIe virtual-wire interrupts.
- [ 19.571526] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s3f3u1: link becomes ready
- [ 19.572763] asix 2-1:1.0 enp0s3f3u1: link up, 100Mbps, full-duplex, lpa 0xC5E1
- [ 21.412304] usbcore: registered new interface driver usbhid
- [ 21.412309] usbhid: USB HID core driver
- [ 21.424043] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:03.0/usb1/1-2/1-2:1.0/0003:046D:C30F.0001/input/input21
- [ 21.424221] hid-generic 0003:046D:C30F.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:03.0-2/input0
- [ 21.427079] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:03.0/usb1/1-2/1-2:1.1/0003:046D:C30F.0002/input/input22
- [ 21.427210] hid-generic 0003:046D:C30F.0002: input,hidraw1: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:03.0-2/input1
- [ 21.427456] input: Ruling Technologies Sdn. Bhd. SteelSeries Gaming Device as /devices/pci0000:00/0000:00:03.1/usb3/3-2/3-2:1.0/0003:1038:1360.0003/input/input23
- [ 21.427626] hid-generic 0003:1038:1360.0003: input,hidraw2: USB HID v1.00 Mouse [Ruling Technologies Sdn. Bhd. SteelSeries Gaming Device] on usb-0000:00:03.1-2/input0
- [ 21.427834] input: Ruling Technologies Sdn. Bhd. SteelSeries Gaming Device as /devices/pci0000:00/0000:00:03.1/usb3/3-2/3-2:1.1/0003:1038:1360.0004/input/input24
- [ 21.427952] hid-generic 0003:1038:1360.0004: input,hidraw3: USB HID v1.00 Keyboard [Ruling Technologies Sdn. Bhd. SteelSeries Gaming Device] on usb-0000:00:03.1-2/input1
- [ 21.433712] hid-generic 0003:1038:1360.0005: hiddev0,hidraw4: USB HID v1.00 Device [Ruling Technologies Sdn. Bhd. SteelSeries Gaming Device] on usb-0000:00:03.1-2/input2
- [ 27.806682] sis190 0000:00:04.0 enp0s4: auto-negotiating...
- [ 30.362733] fuse init (API version 7.22)
- [ 261.451937] usb 1-2: USB disconnect, device number 2
- [ 265.173360] usb 3-1: new low-speed USB device number 4 using ohci-pci
- [ 265.383703] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.0/0003:046D:C30F.0006/input/input25
- [ 265.383973] hid-generic 0003:046D:C30F.0006: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:03.1-1/input0
- [ 265.399121] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.1/0003:046D:C30F.0007/input/input26
- [ 265.399361] hid-generic 0003:046D:C30F.0007: input,hidraw1: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:03.1-1/input1
- [ 271.090007] usb 2-3: new high-speed USB device number 8 using ehci-pci
- [ 271.418638] usb-storage 2-3:1.0: USB Mass Storage device detected
- [ 271.419663] scsi4 : usb-storage 2-3:1.0
- [ 271.419877] usbcore: registered new interface driver usb-storage
- [ 272.560807] scsi 4:0:0:0: Direct-Access USB 2.0 USB Flash Drive 1100 PQ: 0 ANSI: 4
- [ 272.564660] sd 4:0:0:0: [sdc] 7975296 512-byte logical blocks: (4.08 GB/3.80 GiB)
- [ 272.565403] sd 4:0:0:0: [sdc] Write Protect is off
- [ 272.565407] sd 4:0:0:0: [sdc] Mode Sense: 43 00 00 00
- [ 272.566153] sd 4:0:0:0: [sdc] No Caching mode page found
- [ 272.566158] sd 4:0:0:0: [sdc] Assuming drive cache: write through
- [ 272.569652] sd 4:0:0:0: [sdc] No Caching mode page found
- [ 272.569655] sd 4:0:0:0: [sdc] Assuming drive cache: write through
- [ 272.570409] sdc: sdc1
- [ 272.573778] sd 4:0:0:0: [sdc] No Caching mode page found
- [ 272.573782] sd 4:0:0:0: [sdc] Assuming drive cache: write through
- [ 272.573785] sd 4:0:0:0: [sdc] Attached SCSI removable disk
- [ 272.941173] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
- [ 364.714430] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
- [ 407.969251] usb 2-3: USB disconnect, device number 8
- [ 409.133325] usb 2-3: new high-speed USB device number 9 using ehci-pci
- [ 409.292334] usb-storage 2-3:1.0: USB Mass Storage device detected
- [ 409.292476] scsi5 : usb-storage 2-3:1.0
- [ 410.433553] scsi 5:0:0:0: Direct-Access USB 2.0 USB Flash Drive 1100 PQ: 0 ANSI: 4
- [ 410.437536] sd 5:0:0:0: [sdc] 7975296 512-byte logical blocks: (4.08 GB/3.80 GiB)
- [ 410.438282] sd 5:0:0:0: [sdc] Write Protect is off
- [ 410.438286] sd 5:0:0:0: [sdc] Mode Sense: 43 00 00 00
- [ 410.439029] sd 5:0:0:0: [sdc] No Caching mode page found
- [ 410.439033] sd 5:0:0:0: [sdc] Assuming drive cache: write through
- [ 410.442527] sd 5:0:0:0: [sdc] No Caching mode page found
- [ 410.442531] sd 5:0:0:0: [sdc] Assuming drive cache: write through
- [ 410.443286] sdc: sdc1
- [ 410.446034] sd 5:0:0:0: [sdc] No Caching mode page found
- [ 410.446038] sd 5:0:0:0: [sdc] Assuming drive cache: write through
- [ 410.446040] sd 5:0:0:0: [sdc] Attached SCSI removable disk
- [ 437.111589] usb 2-3: USB disconnect, device number 9
- [ 441.919988] usb 2-3: new high-speed USB device number 10 using ehci-pci
- [ 442.079319] usb-storage 2-3:1.0: USB Mass Storage device detected
- [ 442.086330] scsi6 : usb-storage 2-3:1.0
- [ 443.227159] scsi 6:0:0:0: Direct-Access USB 2.0 USB Flash Drive 1100 PQ: 0 ANSI: 4
- [ 443.230732] sd 6:0:0:0: [sdc] 7975296 512-byte logical blocks: (4.08 GB/3.80 GiB)
- [ 443.231479] sd 6:0:0:0: [sdc] Write Protect is off
- [ 443.231483] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
- [ 443.232227] sd 6:0:0:0: [sdc] No Caching mode page found
- [ 443.232231] sd 6:0:0:0: [sdc] Assuming drive cache: write through
- [ 443.235850] sd 6:0:0:0: [sdc] No Caching mode page found
- [ 443.235855] sd 6:0:0:0: [sdc] Assuming drive cache: write through
- [ 443.236609] sdc: sdc1
- [ 443.239610] sd 6:0:0:0: [sdc] No Caching mode page found
- [ 443.239616] sd 6:0:0:0: [sdc] Assuming drive cache: write through
- [ 443.239620] sd 6:0:0:0: [sdc] Attached SCSI removable disk
- [ 547.299928] usb 2-3: USB disconnect, device number 10
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement