API tools faq
paste
Advertisement
Guest User

raspberry

a guest
Jun 16th, 2012
74
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 11.64 KB | None | 0 0
raw download clone embed print report
  1. root@raspbian:~# fdisk -l
  2.  
  3. Disk /dev/mmcblk0: 8166 MB, 8166309888 bytes
  4. 4 heads, 32 sectors/track, 124608 cylinders, total 15949824 sectors
  5. Units = sectors of 1 * 512 = 512 bytes
  6. Sector size (logical/physical): 512 bytes / 512 bytes
  7. I/O size (minimum/optimal): 512 bytes / 512 bytes
  8. Disk identifier: 0x000ee283
  9.  
  10. Device Boot Start End Blocks Id System
  11. /dev/mmcblk0p1 2048 155647 76800 c W95 FAT32 (LBA)
  12. /dev/mmcblk0p2 157696 3414015 1628160 83 Linux
  13. /dev/mmcblk0p3 3416064 3807231 195584 82 Linux swap / Solaris
  14.  
  15. (old kernel 4 MB/s):
  16. root@raspbian:~# hdparm -tT /dev/mmcblk0
  17.  
  18. /dev/mmcblk0:
  19. Timing cached reads: 166 MB in 2.02 seconds = 82.32 MB/sec
  20. Timing buffered disk reads: 34 MB in 3.08 seconds = 11.03 MB/sec
  21.  
  22. root@raspbian:~# dmesg
  23. [ 0.000000] Initializing cgroup subsys cpu
  24. [ 0.000000] Linux version 3.1.9+ (greg@desktop) (gcc version 4.5.1 (Broadcom-2708) ) #13 PREEMPT Sat Jun 16 21:57:09 CEST 2012
  25. [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
  26. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  27. [ 0.000000] Machine: BCM2708
  28. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  29. [ 0.000000] On node 0 totalpages: 49152
  30. [ 0.000000] free_area_init_node: node 0, pgdat c05f124c, node_mem_map c06c1000
  31. [ 0.000000] Normal zone: 384 pages used for memmap
  32. [ 0.000000] Normal zone: 0 pages reserved
  33. [ 0.000000] Normal zone: 48768 pages, LIFO batch:15
  34. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  35. [ 0.000000] pcpu-alloc: [0] 0
  36. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 48768
  37. [ 0.000000] Kernel command line: dma.dmachans=0x3c bcm2708_fb.fbwidth=1680 bcm2708_fb.fbheight=1050 bcm2708.boardrev=0x2 bcm2708.serial=0x6ec442f5 smsc95xx.macaddr=B8:27:EB:C4:42:F5 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait
  38. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  39. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  40. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  41. [ 0.000000] Memory: 192MB = 192MB total
  42. [ 0.000000] Memory: 187908k/187908k available, 8700k reserved, 0K highmem
  43. [ 0.000000] Virtual kernel memory layout:
  44. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  45. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  46. [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  47. [ 0.000000] vmalloc : 0xcc800000 - 0xd8000000 ( 184 MB)
  48. [ 0.000000] lowmem : 0xc0000000 - 0xcc000000 ( 192 MB)
  49. [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  50. [ 0.000000] .text : 0xc0008000 - 0xc0593fd4 (5680 kB)
  51. [ 0.000000] .init : 0xc0594000 - 0xc05c5000 ( 196 kB)
  52. [ 0.000000] .data : 0xc05c6000 - 0xc05f29b8 ( 179 kB)
  53. [ 0.000000] .bss : 0xc05f29dc - 0xc06c06e4 ( 824 kB)
  54. [ 0.000000] NR_IRQS:85
  55. [ 0.000000] timer_set_mode: unhandled mode:1
  56. [ 0.000000] timer_set_mode: unhandled mode:3
  57. [ 0.000000] Console: colour dummy device 80x30
  58. [ 0.000000] console [tty1] enabled
  59. [ 1.714341] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
  60. [ 1.773302] pid_max: default: 32768 minimum: 301
  61. [ 1.773922] Mount-cache hash table entries: 512
  62. [ 1.774572] Initializing cgroup subsys cpuacct
  63. [ 1.774659] Initializing cgroup subsys devices
  64. [ 1.774707] Initializing cgroup subsys freezer
  65. [ 1.774751] Initializing cgroup subsys blkio
  66. [ 1.774879] CPU: Testing write buffer coherency: ok
  67. [ 1.775014] ftrace: allocating 14754 entries in 44 pages
  68. [ 1.846007] hw perfevents: enabled with v6 PMU driver, 3 counters available
  69. [ 1.848401] devtmpfs: initialized
  70. [ 1.850895] NET: Registered protocol family 16
  71. [ 1.852340] vc-mem: mm_vc_mem_phys_addr = 0x00000000
  72. [ 1.852405] vc-mem: mm_vc_mem_size = 0x10000000 (256 MiB)
  73. [ 1.852924] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  74. [ 1.852999] hw-breakpoint: maximum watchpoint size is 4 bytes.
  75. [ 1.853049] mailbox: Broadcom VideoCore Mailbox driver
  76. [ 1.853165] bcm2708_vcio: mailbox at f200b880
  77. [ 1.853271] bcm_power: Broadcom power driver
  78. [ 1.853319] bcm_power_open() -> 0
  79. [ 1.853351] bcm_power_request(0, 8)
  80. [ 2.354043] bcm_mailbox_read -> 00000080, 0
  81. [ 2.354090] bcm_power_request -> 0
  82. [ 2.354122] Serial: AMBA PL011 UART driver
  83. [ 2.354293] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
  84. [ 2.658355] console [ttyAMA0] enabled
  85. [ 2.683297] bio: create slab <bio-0> at 0
  86. [ 2.688859] SCSI subsystem initialized
  87. [ 2.692899] usbcore: registered new interface driver usbfs
  88. [ 2.698679] usbcore: registered new interface driver hub
  89. [ 2.704333] usbcore: registered new device driver usb
  90. [ 2.710477] Switching to clocksource stc
  91. [ 2.719554] Switched to NOHz mode on CPU #0
  92. [ 2.733008] FS-Cache: Loaded
  93. [ 2.736413] CacheFiles: Loaded
  94. [ 2.757717] NET: Registered protocol family 2
  95. [ 2.762638] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
  96. [ 2.771195] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  97. [ 2.778731] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
  98. [ 2.785442] TCP: Hash tables configured (established 8192 bind 8192)
  99. [ 2.791827] TCP reno registered
  100. [ 2.795039] UDP hash table entries: 256 (order: 0, 4096 bytes)
  101. [ 2.800930] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  102. [ 2.807793] NET: Registered protocol family 1
  103. [ 2.813167] RPC: Registered named UNIX socket transport module.
  104. [ 2.819356] RPC: Registered udp transport module.
  105. [ 2.824091] RPC: Registered tcp transport module.
  106. [ 2.828858] RPC: Registered tcp NFSv4.1 backchannel transport module.
  107. [ 2.835667] bcm2708_dma: DMA manager at cc808000
  108. [ 2.840425] bcm2708_gpio: bcm2708_gpio_probe c05ce0a8
  109. [ 2.845778] vc-mem: Videocore memory driver
  110. [ 2.850885] audit: initializing netlink socket (disabled)
  111. [ 2.856457] type=2000 audit(0.770:1): initialized
  112. [ 2.968598] VFS: Disk quotas dquot_6.5.2
  113. [ 2.972814] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  114. [ 2.980857] FS-Cache: Netfs 'nfs' registered for caching
  115. [ 2.987550] msgmni has been set to 367
  116. [ 2.993957] io scheduler noop registered
  117. [ 2.998141] io scheduler deadline registered
  118. [ 3.002650] io scheduler cfq registered (default)
  119. [ 3.007789] BCM2708FB: registering framebuffer (1680x1050@16)
  120. [ 3.014386] bcm2708_fb_set_par info(cb8dd400) 1680x1050 (1680x1050), 0, 16
  121. [ 3.029839] BCM2708FB: start = ccc00000,4d385000 width=1680, height=1050, bpp=16, pitch=3360 size=3548160 success=0
  122. [ 3.055864] Console: switching to colour frame buffer device 210x65
  123. [ 3.104073] BCM2708FB: register framebuffer (0)
  124. [ 3.109575] kgdb: Registered I/O driver kgdboc.
  125. [ 3.126335] brd: module loaded
  126. [ 3.135863] loop: module loaded
  127. [ 3.140090] vcos: [1]: vchiq_init_state: slot_zero = 0xffd80000, is_master = 0
  128. [ 3.147864] vcos: [1]: vchiq_init_state: called
  129. [ 3.153359] vcos: [1]: vchiq: initialised - version 2 (min 2), device 253.0
  130. [ 3.161532] usbcore: registered new interface driver smsc95xx
  131. [ 3.167606] cdc_ncm: 04-Aug-2011
  132. [ 3.171080] usbcore: registered new interface driver cdc_ncm
  133. [ 3.176967] dwc_otg: version 2.90b 6-MAY-2010 (platform bus)
  134. [ 3.183180] Core Release: 2.80a
  135. [ 3.186561] Setting default values for core params
  136. [ 3.191531] Finished setting default values for core params
  137. [ 3.197544] cc840008 -> 1
  138. [ 3.400301] Using Buffer DMA mode
  139. [ 3.403735] Periodic Transfer Interrupt Enhancement - disabled
  140. [ 3.409844] Multiprocessor Interrupt Enhancement - disabled
  141. [ 3.415641] Dedicated Tx FIFOs mode
  142. [ 3.419500] dwc_otg bcm2708_usb: DWC OTG Controller
  143. [ 3.424668] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
  144. [ 3.432185] dwc_otg bcm2708_usb: irq 75, io mem 0x00000000
  145. [ 3.437942] Init: Port Power? op_state=1
  146. [ 3.441988] Init: Power Port (0)
  147. [ 3.445510] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  148. [ 3.452506] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  149. [ 3.459989] usb usb1: Product: DWC OTG Controller
  150. [ 3.464879] usb usb1: Manufacturer: Linux 3.1.9+ dwc_otg_hcd
  151. [ 3.477830] usb usb1: SerialNumber: bcm2708_usb
  152. [ 3.490775] hub 1-0:1.0: USB hub found
  153. [ 3.501968] hub 1-0:1.0: 1 port detected
  154. [ 3.514059] Module dwc_common_port init
  155. [ 3.514532] usbcore: registered new interface driver uas
  156. [ 3.527206] Initializing USB Mass Storage driver...
  157. [ 3.539573] usbcore: registered new interface driver usb-storage
  158. [ 3.552834] USB Mass Storage support registered.
  159. [ 3.564967] usbcore: registered new interface driver libusual
  160. [ 3.578504] mousedev: PS/2 mouse device common for all mice
  161. [ 3.591357] cpuidle: using governor ladder
  162. [ 3.602630] cpuidle: using governor menu
  163. [ 3.614026] sdhci: Secure Digital Host Controller Interface driver
  164. [ 3.627340] sdhci: Copyright(c) Pierre Ossman
  165. [ 3.639031] bcm_power_open() -> 1
  166. [ 3.649901] Registered led device: mmc0::
  167. [ 3.650409] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
  168. [ 3.665776] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
  169. [ 3.679111] sdhci-pltfm: SDHCI platform and OF driver helper
  170. [ 3.693550] Registered led device: led0
  171. [ 3.694038] usbcore: registered new interface driver usbhid
  172. [ 3.712883] usbhid: USB HID core driver
  173. [ 3.737672] TCP cubic registered
  174. [ 3.764505] Initializing XFRM netlink socket
  175. [ 3.782513] mmc0: problem reading SD Status register.
  176. [ 3.804669] NET: Registered protocol family 17
  177. [ 3.820116] mmc0: new high speed SDHC card at address 0001
  178. [ 3.844605] Registering the dns_resolver key type
  179. [ 3.864616] mmcblk0: mmc0:0001 00000 7.60 GiB
  180. [ 3.876571] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
  181. [ 3.904079] mmcblk0: p1 p2 p3
  182. [ 3.953259] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  183. [ 3.969222] VFS: Mounted root (ext4 filesystem) on device 179:2.
  184. [ 3.984176] Freeing init memory: 196K
  185. [ 4.024618] usb 1-1: new high speed USB device number 2 using dwc_otg
  186. [ 4.255353] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
  187. [ 4.270686] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  188. [ 4.288669] hub 1-1:1.0: USB hub found
  189. [ 4.300236] hub 1-1:1.0: 3 ports detected
  190. [ 4.594945] usb 1-1.1: new high speed USB device number 3 using dwc_otg
  191. [ 4.735466] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  192. [ 4.750297] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  193. [ 4.773942] smsc95xx v1.0.4
  194. [ 4.850533] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:c4:42:f5
  195. [ 4.974821] usb 1-1.3: new full speed USB device number 4 using dwc_otg
  196. [ 5.100692] usb 1-1.3: New USB device found, idVendor=046d, idProduct=0a01
  197. [ 5.130354] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  198. [ 5.161489] usb 1-1.3: Product: Logitech USB Headset
  199. [ 5.184648] usb 1-1.3: Manufacturer: Logitech
  200. [ 8.453346] usbcore: registered new interface driver snd-usb-audio
  201. [ 10.729852] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  202. [ 21.196494] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
  203. [ 26.007638] NET: Registered protocol family 10
  204. [ 36.884511] eth0: no IPv6 routers present
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!