API tools faq
paste
Advertisement
Guest User

DSO boot

a guest
Sep 6th, 2015
605
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.47 KB | None | 0 0
raw download clone embed print report
  1. OM*** Warning - bad CRC, using default environment
  2.  
  3.  
  4. ##### EmbedSky BIOS for SKY2416/TQ2416 #####
  5. This Board: SDRAM is 64MB; Press Space key to Download Mode.!
  6.  
  7. NAND read: device 0 offset 0x380000, size 0x800
  8. 2048 bytes read: OK
  9. **************************normal start*******************************
  10.  
  11. NAND erase: device 0 offset 0x380000, size 0x80000
  12. Erasing at 0x3e0000 -- 100% complete.
  13. OK
  14.  
  15. NAND write: device 0 offset 0x380000, size 0x800
  16. Writing data at 0x380800 -- 100% complete.
  17. 2048 bytes written: OK
  18.  
  19. NAND read: device 0 offset 0x380000, size 0x800
  20. 2048 bytes read: OK
  21. Saving Environment to NAND...
  22. Erasing Nand...
  23. Warning: Erase size 0x00004000 smaller than one erase block 0x00020000
  24. Erasing 0x00020000 instead
  25. Erasing at 0x80000 -- 100% complete.
  26. Writing to Nand... done
  27.  
  28. NAND read: device 0 offset 0x400000, size 0x400000
  29. 4194304 bytes read: OK
  30. Boot with zImage
  31.  
  32. Starting kernel ...
  33.  
  34. Uncompressing Linux... done, booting the kernel.
  35. Linux version 3.2.35 (root@zgt) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-176) ) #83 PREEMPT Sat Sep 6 22:13:37 CST 2014
  36. CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
  37. CPU: VIVT data cache, VIVT instruction cache
  38. Machine: SMDK2416
  39. Ignoring unrecognised tag 0x54410008
  40. Memory policy: ECC disabled, Data cache writeback
  41. CPU S3C2416/S3C2450 (id 0x32450003)
  42. S3C24XX Clocks, Copyright 2004 Simtec Electronics
  43. CPU: MPLL on 800.000 MHz, cpu 400.000 MHz, mem 133.333 MHz, pclk 66.666 MHz
  44. CPU: EPLL on 96.000 MHz, usb-bus 48.000 MHz
  45. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
  46. Kernel command line: noinitrd ubi.mtd=5 root=ubi0:rootfs rootfstype=ubifs init=/linuxrc console=ttySAC0 lcd=X480Y272
  47. PID hash table entries: 256 (order: -2, 1024 bytes)
  48. Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  49. Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  50. Memory: 64MB = 64MB total
  51. Memory: 58996k/58996k available, 6540k reserved, 0K highmem
  52. Virtual kernel memory layout:
  53. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  54. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  55. vmalloc : 0xc4800000 - 0xf6000000 ( 792 MB)
  56. lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
  57. modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  58. .text : 0xc0008000 - 0xc03ef000 (3996 kB)
  59. .init : 0xc03ef000 - 0xc040f000 ( 128 kB)
  60. .data : 0xc0410000 - 0xc05a9020 (1637 kB)
  61. .bss : 0xc05a9044 - 0xc05c6d7c ( 120 kB)
  62. SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  63. NR_IRQS:107
  64. irq: clearing subpending status 00000002
  65. Calibrating delay loop... 198.45 BogoMIPS (lpj=496128)
  66. pid_max: default: 4096 minimum: 301
  67. Mount-cache hash table entries: 512
  68. CPU: Testing write buffer coherency: ok
  69. NET: Registered protocol family 16
  70. S3C2416: Initializing architecture
  71. S3C2416: IRQ Support
  72. S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics
  73. DMA channel 0 at c4804000, irq 88
  74. DMA channel 1 at c4804100, irq 89
  75. DMA channel 2 at c4804200, irq 90
  76. DMA channel 3 at c4804300, irq 91
  77. DMA channel 4 at c4804400, irq 92
  78. DMA channel 5 at c4804500, irq 93
  79. bio: create slab <bio-0> at 0
  80. SCSI subsystem initialized
  81. usbcore: registered new interface driver usbfs
  82. usbcore: registered new interface driver hub
  83. usbcore: registered new device driver usb
  84. s3c-i2c s3c2410-i2c: slave address 0x10
  85. s3c-i2c s3c2410-i2c: bus frequency set to 9 KHz
  86. s3c-i2c s3c2410-i2c: i2c-0: S3C I2C adapter
  87. Advanced Linux Sound Architecture Driver Version 1.0.24.
  88. NET: Registered protocol family 2
  89. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  90. TCP established hash table entries: 2048 (order: 2, 16384 bytes)
  91. TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  92. TCP: Hash tables configured (established 2048 bind 2048)
  93. TCP reno registered
  94. NET: Registered protocol family 1
  95. RPC: Registered named UNIX socket transport module.
  96. RPC: Registered udp transport module.
  97. RPC: Registered tcp transport module.
  98. RPC: Registered tcp NFSv4.1 backchannel transport module.
  99. s3c-adc s3c24xx-adc: attached adc driver
  100. msgmni has been set to 115
  101. io scheduler noop registered (default)
  102. io scheduler cfq registered
  103. s3c-fb s3c-fb: window 0: fb
  104. s3c-fb s3c-fb: LCD type is TN83 800*480, default_bpp=16, pixclock=5
  105. s3c-fb s3c-fb: window 1: fb
  106. s3c-fb s3c-fb: LCD type is TN83 800*480, default_bpp=16, pixclock=5
  107. s3c2440-uart.0: ttySAC0 at MMIO 0x50000000 (irq = 70) is a S3C2440
  108. console [ttySAC0] enabled
  109. s3c2440-uart.1: ttySAC1 at MMIO 0x50004000 (irq = 73) is a S3C2440
  110. s3c2440-uart.2: ttySAC2 at MMIO 0x50008000 (irq = 76) is a S3C2440
  111. s3c2440-uart.3: ttySAC3 at MMIO 0x5000c000 (irq = 94) is a S3C2440
  112. loop: module loaded
  113. S3C24XX NAND Driver, (c) 2004 Simtec Electronics
  114. info->cpu_type=3, tacls_max=8
  115. s3c24xx-nand s3c2416-nand: Tacls=3, 22ns Twrph0=7 52ns, Twrph1=3 22ns
  116. s3c24xx-nand s3c2416-nand: System booted from NAND
  117. s3c24xx-nand s3c2416-nand: NAND ECC disabled
  118. NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit)
  119. NAND_ECC_NONE selected by board driver. This is not recommended!
  120. Scanning device for bad blocks
  121. Creating 8 MTD partitions on "NAND":
  122. 0x000000000000-0x000000100000 : "uboot"
  123. 0x000000100000-0x000000180000 : "params"
  124. 0x000000180000-0x000000380000 : "logo"
  125. 0x000000380000-0x000000400000 : "misc"
  126. 0x000000400000-0x000000800000 : "kernel"
  127. 0x000000800000-0x000004e00000 : "rootfs"
  128. 0x000004e00000-0x000005200000 : "kernel_bk"
  129. 0x000005200000-0x000008000000 : "recover"
  130. UBI: attaching mtd5 to ubi0
  131. UBI: physical eraseblock size: 131072 bytes (128 KiB)
  132. UBI: logical eraseblock size: 126976 bytes
  133. UBI: smallest flash I/O unit: 2048
  134. UBI: VID header offset: 2048 (aligned 2048)
  135. UBI: data offset: 4096
  136. UBI: max. sequence number: 1599
  137. UBI: attached mtd5 to ubi0
  138. UBI: MTD device name: "rootfs"
  139. UBI: MTD device size: 70 MiB
  140. UBI: number of good PEBs: 560
  141. UBI: number of bad PEBs: 0
  142. UBI: number of corrupted PEBs: 0
  143. UBI: max. allowed volumes: 128
  144. UBI: wear-leveling threshold: 4096
  145. UBI: number of internal volumes: 1
  146. UBI: number of user volumes: 1
  147. UBI: available PEBs: 0
  148. UBI: total number of reserved PEBs: 560
  149. UBI: number of PEBs reserved for bad PEB handling: 5
  150. UBI: max/mean erase counter: 6/3
  151. UBI: image sequence number: 0
  152. UBI: background thread "ubi_bgt0d" started, PID 330
  153. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  154. s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
  155. s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
  156. s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
  157. hub 1-0:1.0: USB hub found
  158. hub 1-0:1.0: 1 port detected
  159. usbcore: registered new interface driver usblp
  160. usbcore: registered new interface driver uas
  161. Initializing USB Mass Storage driver...
  162. usbcore: registered new interface driver usb-storage
  163. USB Mass Storage support registered.
  164. g_serial gadget: Gadget Serial v2.4
  165. g_serial gadget: g_serial ready
  166. s3c-hsudc s3c-hsudc: bound driver g_serial
  167. samsung-ts s3c2416-ts: driver attached, registering input device
  168. input: S3C24XX TouchScreen as /devices/virtual/input/input0
  169. S3C24XX RTC, (c) 2004,2006 Simtec Electronics
  170. s3c-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
  171. i2c /dev entries driver
  172. S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
  173. s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq disabled
  174. sdhci: Secure Digital Host Controller Interface driver
  175. sdhci: Copyright(c) Pierre Ossman
  176. s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133333333 Hz)
  177. s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133333333 Hz)
  178. s3c-sdhci s3c-sdhci.1: clock source 2: hsmmc-if (24000000 Hz)
  179. mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
  180. S3C24XX_UDA134X SoC Audio driver
  181. UDA134X SoC Audio Codec
  182. asoc: uda134x-hifi <-> s3c24xx-iis mapping ok
  183. ALSA device list:
  184. #0: S3C24XX_UDA134X
  185. TCP cubic registered
  186. NET: Registered protocol family 17
  187. Registering the dns_resolver key type
  188. s3c-rtc s3c2410-rtc: setting system clock to 2015-09-06 19:41:40 UTC (1441568500)
  189. UBIFS: recovery needed
  190. g_serial gadget: high-speed config #1: Generic Serial config
  191. UBIFS: recovery completed
  192. UBIFS: mounted UBI device 0, volume 0, name "rootfs"
  193. UBIFS: file system size: 68567040 bytes (66960 KiB, 65 MiB, 540 LEBs)
  194. UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
  195. UBIFS: media format: w4/r0 (latest is w4/r0)
  196. UBIFS: default compressor: lzo
  197. UBIFS: reserved for root: 0 bytes (0 KiB)
  198. VFS: Mounted root (ubifs filesystem) on device 0:10.
  199. Freeing init memory: 128K
  200. dso-iobank: install ok
  201. adc init
  202. TQ2416 ADC driver
  203. 0x505
  204. gpio_major_n = 5, io_minor_n = 5, output 0
  205. 0x603
  206. gpio_major_n = 6, io_minor_n = 3, output 0
  207. 0x70a
  208. gpio_major_n = 7, io_minor_n = 10, output 0
  209. 0x408
  210. gpio_major_n = 4, io_minor_n = 8, output 1
  211. dso5000b fpga configure init
  212. fpga0:status: 0x0
  213. FPGA0 CONFIGURE DATA DOWN finish.
  214. FPGA0 CONFIGURE Ok.
  215. 0x8090
  216. 0x1
  217. fpga bank 11811dso-fpga: install ok
  218. bkl tq2416-backlight initialized done...
  219. close beep now
  220. dso-buzzer s3c2416-beep initialized done...
  221. make snd node.
  222. --------------------------------------------------------------------------------
  223. start
  224. --------------------------------------------------------------------------------
  225.  
  226. Please press Enter to activate this console. mtd3: 00080000 00020000 "misc"
  227. Block size 131072, page size 2048, OOB size 64
  228. Dumping data starting at 0x00000000 and ending at 0x00080000...
  229. Erasing 128 Kibyte @ 80000 - 100% complete.
  230. open_serial_device:open serial success
  231. save_recall_param_reinit:2:(nil)
  232. main:74
  233. INIT SYS OK!
  234. main:77
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!