Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 1506.923]
- X.Org X Server 1.12.2
- Release Date: 2012-05-29
- [ 1506.923] X Protocol Version 11, Revision 0
- [ 1506.923] Build Operating System: Linux 3.0.32-1-lts x86_64
- [ 1506.923] Current Operating System: Linux Cavetroll-lin 3.3.7-1-ARCH #1 SMP PREEMPT Tue May 22 00:26:26 CEST 2012 x86_64
- [ 1506.923] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=85eee8cb-67c8-41c2-95a5-c2d7e97a9e1c ro quiet add_efi_memmap
- [ 1506.923] Build Date: 30 May 2012 07:24:13PM
- [ 1506.923]
- [ 1506.923] Current version of pixman: 0.26.0
- [ 1506.923] Before reporting problems, check http://wiki.x.org
- to make sure that you have the latest version.
- [ 1506.923] Markers: (--) probed, (**) from config file, (==) default setting,
- (++) from command line, (!!) notice, (II) informational,
- (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
- [ 1506.923] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 7 17:09:20 2012
- [ 1506.923] (==) Using config file: "/etc/X11/xorg.conf"
- [ 1506.923] (==) Using config directory: "/etc/X11/xorg.conf.d"
- [ 1506.923] (==) ServerLayout "Layout0"
- [ 1506.923] (**) |-->Screen "Screen0" (0)
- [ 1506.923] (**) | |-->Monitor "DFP-2"
- [ 1506.923] (**) | |-->Device "Device0"
- [ 1506.923] (**) |-->Screen "Screen2" (1)
- [ 1506.923] (**) | |-->Monitor "HDMI1"
- [ 1506.923] (**) | |-->Device "Device2"
- [ 1506.923] (**) Option "Xinerama" "1"
- [ 1506.923] (==) Automatically adding devices
- [ 1506.923] (==) Automatically enabling devices
- [ 1506.923] (**) Xinerama: enabled
- [ 1506.924] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
- [ 1506.924] Entry deleted from font path.
- [ 1506.924] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
- [ 1506.924] Entry deleted from font path.
- [ 1506.924] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
- [ 1506.924] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
- [ 1506.924] Entry deleted from font path.
- [ 1506.924] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
- [ 1506.924] (==) FontPath set to:
- /usr/share/fonts/misc/,
- /usr/share/fonts/TTF/,
- /usr/share/fonts/Type1/
- [ 1506.924] (==) ModulePath set to "/usr/lib/xorg/modules"
- [ 1506.924] (**) Extension "Composite" is enabled
- [ 1506.924] (II) The server relies on udev to provide the list of input devices.
- If no devices become available, reconfigure udev or disable AutoAddDevices.
- [ 1506.924] (II) Loader magic: 0x7c58e0
- [ 1506.924] (II) Module ABI versions:
- [ 1506.924] X.Org ANSI C Emulation: 0.4
- [ 1506.924] X.Org Video Driver: 12.0
- [ 1506.924] X.Org XInput driver : 16.0
- [ 1506.924] X.Org Server Extension : 6.0
- [ 1506.924] (--) PCI: (0:0:2:0) 8086:0112:1849:0112 rev 9, Mem @ 0xfb400000/4194304, 0xc0000000/268435456, I/O @ 0x0000f000/64
- [ 1506.924] (--) PCI:*(0:1:0:0) 10de:1086:1462:2571 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/134217728, 0xd8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
- [ 1506.924] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
- [ 1506.924] (II) LoadModule: "extmod"
- [ 1506.924] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
- [ 1506.924] (II) Module extmod: vendor="X.Org Foundation"
- [ 1506.924] compiled for 1.12.2, module version = 1.0.0
- [ 1506.924] Module class: X.Org Server Extension
- [ 1506.924] ABI class: X.Org Server Extension, version 6.0
- [ 1506.924] (II) Loading extension MIT-SCREEN-SAVER
- [ 1506.924] (II) Loading extension XFree86-VidModeExtension
- [ 1506.924] (II) Loading extension XFree86-DGA
- [ 1506.924] (II) Loading extension DPMS
- [ 1506.924] (II) Loading extension XVideo
- [ 1506.924] (II) Loading extension XVideo-MotionCompensation
- [ 1506.925] (II) Loading extension X-Resource
- [ 1506.925] (II) LoadModule: "dbe"
- [ 1506.925] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
- [ 1506.925] (II) Module dbe: vendor="X.Org Foundation"
- [ 1506.925] compiled for 1.12.2, module version = 1.0.0
- [ 1506.925] Module class: X.Org Server Extension
- [ 1506.925] ABI class: X.Org Server Extension, version 6.0
- [ 1506.925] (II) Loading extension DOUBLE-BUFFER
- [ 1506.925] (II) LoadModule: "glx"
- [ 1506.925] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
- [ 1506.925] (II) Module glx: vendor="X.Org Foundation"
- [ 1506.925] compiled for 1.12.2, module version = 1.0.0
- [ 1506.925] ABI class: X.Org Server Extension, version 6.0
- [ 1506.925] (==) AIGLX enabled
- [ 1506.925] (II) Loading extension GLX
- [ 1506.925] (II) LoadModule: "record"
- [ 1506.925] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
- [ 1506.925] (II) Module record: vendor="X.Org Foundation"
- [ 1506.925] compiled for 1.12.2, module version = 1.13.0
- [ 1506.925] Module class: X.Org Server Extension
- [ 1506.925] ABI class: X.Org Server Extension, version 6.0
- [ 1506.925] (II) Loading extension RECORD
- [ 1506.925] (II) LoadModule: "dri"
- [ 1506.925] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
- [ 1506.925] (II) Module dri: vendor="X.Org Foundation"
- [ 1506.925] compiled for 1.12.2, module version = 1.0.0
- [ 1506.925] ABI class: X.Org Server Extension, version 6.0
- [ 1506.925] (II) Loading extension XFree86-DRI
- [ 1506.925] (II) LoadModule: "dri2"
- [ 1506.925] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
- [ 1506.925] (II) Module dri2: vendor="X.Org Foundation"
- [ 1506.925] compiled for 1.12.2, module version = 1.2.0
- [ 1506.925] ABI class: X.Org Server Extension, version 6.0
- [ 1506.925] (II) Loading extension DRI2
- [ 1506.925] (II) LoadModule: "nvidia"
- [ 1506.925] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
- [ 1506.925] (II) Module nvidia: vendor="NVIDIA Corporation"
- [ 1506.925] compiled for 4.0.2, module version = 1.0.0
- [ 1506.926] Module class: X.Org Video Driver
- [ 1506.926] (II) LoadModule: "intel"
- [ 1506.926] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
- [ 1506.926] (II) Module intel: vendor="X.Org Foundation"
- [ 1506.926] compiled for 1.12.2, module version = 2.19.0
- [ 1506.926] Module class: X.Org Video Driver
- [ 1506.926] ABI class: X.Org Video Driver, version 12.0
- [ 1506.926] (II) NVIDIA dlloader X Driver 302.07 Fri Apr 27 11:51:44 PDT 2012
- [ 1506.926] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
- [ 1506.926] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
- i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
- E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
- 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
- 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
- Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
- Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
- Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
- Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
- Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
- Ivybridge Server (GT2)
- [ 1506.926] (++) using VT number 7
- [ 1507.007] (II) Loading sub module "fb"
- [ 1507.007] (II) LoadModule: "fb"
- [ 1507.007] (II) Loading /usr/lib/xorg/modules/libfb.so
- [ 1507.007] (II) Module fb: vendor="X.Org Foundation"
- [ 1507.007] compiled for 1.12.2, module version = 1.0.0
- [ 1507.007] ABI class: X.Org ANSI C Emulation, version 0.4
- [ 1507.007] (II) Loading sub module "wfb"
- [ 1507.007] (II) LoadModule: "wfb"
- [ 1507.007] (II) Loading /usr/lib/xorg/modules/libwfb.so
- [ 1507.007] (II) Module wfb: vendor="X.Org Foundation"
- [ 1507.007] compiled for 1.12.2, module version = 1.0.0
- [ 1507.007] ABI class: X.Org ANSI C Emulation, version 0.4
- [ 1507.007] (II) Loading sub module "ramdac"
- [ 1507.007] (II) LoadModule: "ramdac"
- [ 1507.007] (II) Module "ramdac" already built-in
- [ 1507.007] (WW) NVIDIA: The Composite and Xinerama extensions are both enabled, which
- [ 1507.007] (WW) NVIDIA: is an unsupported configuration. The driver will continue
- [ 1507.007] (WW) NVIDIA: to load, but may behave strangely.
- [ 1507.007] (WW) NVIDIA: Xinerama is enabled, so RandR has likely been disabled by the
- [ 1507.007] (WW) NVIDIA: X server.
- [ 1507.008] (II) NVIDIA(0): Creating default Display subsection in Screen section
- "Screen0" for depth/fbbpp 24/32
- [ 1507.008] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
- [ 1507.008] (==) NVIDIA(0): RGB weight 888
- [ 1507.008] (==) NVIDIA(0): Default visual is TrueColor
- [ 1507.008] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
- [ 1507.008] (**) NVIDIA(0): Option "MetaModes" "DFP-0: nvidia-auto-select +1024+0, DFP-2: nvidia-auto-select { Rotation=left }"
- [ 1507.008] (**) NVIDIA(0): Enabling 2D acceleration
- [ 1507.008] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
- [ 1507.008] (EE) NVIDIA(0): log file that the GLX module has been loaded in your X
- [ 1507.008] (EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
- [ 1507.008] (EE) NVIDIA(0): you continue to encounter problems, Please try
- [ 1507.008] (EE) NVIDIA(0): reinstalling the NVIDIA driver.
- [ 1507.680] (II) NVIDIA(GPU-0): Display (HannStar Display Corp HZ281H (DFP-0)) does not
- [ 1507.680] (II) NVIDIA(GPU-0): support NVIDIA 3D Vision stereo.
- [ 1507.710] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-2)) does not support NVIDIA
- [ 1507.710] (II) NVIDIA(GPU-0): 3D Vision stereo.
- [ 1507.711] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 570 (GF110) at PCI:1:0:0 (GPU-0)
- [ 1507.711] (--) NVIDIA(0): Memory: 1310720 kBytes
- [ 1507.711] (--) NVIDIA(0): VideoBIOS: 70.10.27.00.01
- [ 1507.711] (II) NVIDIA(0): Detected PCI Express Link width: 16X
- [ 1507.711] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
- [ 1507.712] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 570 at PCI:1:0:0
- [ 1507.712] (--) NVIDIA(0): CRT-0
- [ 1507.712] (--) NVIDIA(0): CRT-1
- [ 1507.712] (--) NVIDIA(0): HannStar Display Corp HZ281H (DFP-0) (connected)
- [ 1507.712] (--) NVIDIA(0): DFP-1
- [ 1507.712] (--) NVIDIA(0): Samsung SyncMaster (DFP-2) (connected)
- [ 1507.712] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
- [ 1507.712] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
- [ 1507.712] (--) NVIDIA(0): HannStar Display Corp HZ281H (DFP-0): 330.0 MHz maximum pixel clock
- [ 1507.712] (--) NVIDIA(0): HannStar Display Corp HZ281H (DFP-0): Internal Dual Link TMDS
- [ 1507.712] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
- [ 1507.712] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
- [ 1507.712] (--) NVIDIA(0): Samsung SyncMaster (DFP-2): 330.0 MHz maximum pixel clock
- [ 1507.712] (--) NVIDIA(0): Samsung SyncMaster (DFP-2): Internal Dual Link TMDS
- [ 1507.712] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
- [ 1507.712] (**) NVIDIA(0): device HannStar Display Corp HZ281H (DFP-0) (Using EDID
- [ 1507.712] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
- [ 1507.713] (WW) NVIDIA(0): The EDID for HannStar Display Corp HZ281H (DFP-0) contradicts
- [ 1507.713] (WW) NVIDIA(0): itself: mode "1920x1080" is specified in the EDID;
- [ 1507.713] (WW) NVIDIA(0): however, the EDID's valid HorizSync range (30.000-85.000
- [ 1507.713] (WW) NVIDIA(0): kHz) would exclude this mode's HorizSync (28.1 kHz);
- [ 1507.713] (WW) NVIDIA(0): ignoring HorizSync check for mode "1920x1080".
- [ 1507.713] (WW) NVIDIA(0): The EDID for HannStar Display Corp HZ281H (DFP-0) contradicts
- [ 1507.713] (WW) NVIDIA(0): itself: mode "720x480" is specified in the EDID; however,
- [ 1507.713] (WW) NVIDIA(0): the EDID's valid HorizSync range (30.000-85.000 kHz) would
- [ 1507.713] (WW) NVIDIA(0): exclude this mode's HorizSync (15.7 kHz); ignoring
- [ 1507.713] (WW) NVIDIA(0): HorizSync check for mode "720x480".
- [ 1507.713] (WW) NVIDIA(0): The EDID for HannStar Display Corp HZ281H (DFP-0) contradicts
- [ 1507.713] (WW) NVIDIA(0): itself: mode "720x576" is specified in the EDID; however,
- [ 1507.713] (WW) NVIDIA(0): the EDID's valid HorizSync range (30.000-85.000 kHz) would
- [ 1507.713] (WW) NVIDIA(0): exclude this mode's HorizSync (15.6 kHz); ignoring
- [ 1507.713] (WW) NVIDIA(0): HorizSync check for mode "720x576".
- [ 1507.713] (WW) NVIDIA(0): The EDID for HannStar Display Corp HZ281H (DFP-0) contradicts
- [ 1507.713] (WW) NVIDIA(0): itself: mode "720x480" is specified in the EDID; however,
- [ 1507.713] (WW) NVIDIA(0): the EDID's valid HorizSync range (30.000-85.000 kHz) would
- [ 1507.713] (WW) NVIDIA(0): exclude this mode's HorizSync (15.7 kHz); ignoring
- [ 1507.713] (WW) NVIDIA(0): HorizSync check for mode "720x480".
- [ 1507.713] (WW) NVIDIA(0): The EDID for HannStar Display Corp HZ281H (DFP-0) contradicts
- [ 1507.713] (WW) NVIDIA(0): itself: mode "720x576" is specified in the EDID; however,
- [ 1507.713] (WW) NVIDIA(0): the EDID's valid HorizSync range (30.000-85.000 kHz) would
- [ 1507.713] (WW) NVIDIA(0): exclude this mode's HorizSync (15.6 kHz); ignoring
- [ 1507.713] (WW) NVIDIA(0): HorizSync check for mode "720x576".
- [ 1507.714] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
- [ 1507.714] (**) NVIDIA(0): device Samsung SyncMaster (DFP-2) (Using EDID frequencies
- [ 1507.714] (**) NVIDIA(0): has been enabled on all display devices.)
- [ 1507.715] (II) NVIDIA(0): Validated modes:
- [ 1507.715] (II) NVIDIA(0):
- [ 1507.715] (II) NVIDIA(0): "DFP-0:nvidia-auto-select+1024+0,DFP-2:nvidia-auto-select{Rotation=left}"
- [ 1507.715] (II) NVIDIA(0): Virtual screen size determined to be 2944 x 1280
- [ 1507.741] (--) NVIDIA(0): DPI set to (82, 82); computed from "UseEdidDpi" X config
- [ 1507.742] (--) NVIDIA(0): option
- [ 1507.742] (WW) NVIDIA(0): 32-bit ARGB GLX visuals are not currently supported with the
- [ 1507.742] (WW) NVIDIA(0): Xinerama extension.
- [ 1507.742] (WW) NVIDIA(0): Disabling 32-bit ARGB GLX visuals.
- [ 1507.742] drmOpenDevice: node name is /dev/dri/card0
- [ 1507.742] drmOpenDevice: open result is 14, (OK)
- [ 1507.742] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
- [ 1507.742] drmOpenDevice: node name is /dev/dri/card0
- [ 1507.742] drmOpenDevice: open result is 14, (OK)
- [ 1507.742] drmOpenByBusid: drmOpenMinor returns 14
- [ 1507.742] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
- [ 1507.742] (II) intel(1): Creating default Display subsection in Screen section
- "Screen2" for depth/fbbpp 24/32
- [ 1507.742] (==) intel(1): Depth 24, (--) framebuffer bpp 32
- [ 1507.742] (==) intel(1): RGB weight 888
- [ 1507.742] (==) intel(1): Default visual is TrueColor
- [ 1507.742] (II) intel(1): Integrated Graphics Chipset: Intel(R) Sandybridge Desktop (GT2)
- [ 1507.742] (--) intel(1): Chipset: "Sandybridge Desktop (GT2)"
- [ 1507.742] (**) intel(1): Relaxed fencing enabled
- [ 1507.742] (**) intel(1): Wait on SwapBuffers? enabled
- [ 1507.742] (**) intel(1): Triple buffering? enabled
- [ 1507.742] (**) intel(1): Framebuffer tiled
- [ 1507.742] (**) intel(1): Pixmaps tiled
- [ 1507.742] (**) intel(1): 3D buffers tiled
- [ 1507.742] (**) intel(1): SwapBuffers wait enabled
- [ 1507.742] (==) intel(1): video overlay key set to 0x101fe
- [ 1507.742] (II) intel(1): Output VGA1 using monitor section HDMI1
- [ 1507.742] (**) intel(1): Option "Rotate" "Left"
- [ 1507.876] (II) intel(1): Output HDMI1 using monitor section HDMI1
- [ 1507.916] (II) intel(1): Output DP1 has no monitor section
- [ 1508.449] (II) intel(1): Output HDMI2 has no monitor section
- [ 1508.474] (II) intel(1): Output HDMI3 has no monitor section
- [ 1508.513] (II) intel(1): Output DP2 has no monitor section
- [ 1508.553] (II) intel(1): Output DP3 has no monitor section
- [ 1508.553] (II) intel(1): EDID for output VGA1
- [ 1508.687] (II) intel(1): EDID for output HDMI1
- [ 1508.687] (II) intel(1): Manufacturer: SAM Model: 10f Serial#: 1296707897
- [ 1508.687] (II) intel(1): Year: 2004 Week: 30
- [ 1508.687] (II) intel(1): EDID Version: 1.3
- [ 1508.687] (II) intel(1): Digital Display Input
- [ 1508.687] (II) intel(1): Max Image Size [cm]: horiz.: 38 vert.: 30
- [ 1508.687] (II) intel(1): Gamma: 2.20
- [ 1508.687] (II) intel(1): DPMS capabilities: Off
- [ 1508.687] (II) intel(1): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
- [ 1508.687] (II) intel(1): First detailed timing is preferred mode
- [ 1508.687] (II) intel(1): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
- [ 1508.687] (II) intel(1): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
- [ 1508.687] (II) intel(1): Supported established timings:
- [ 1508.687] (II) intel(1): 720x400@70Hz
- [ 1508.687] (II) intel(1): 640x480@60Hz
- [ 1508.687] (II) intel(1): 640x480@67Hz
- [ 1508.687] (II) intel(1): 640x480@72Hz
- [ 1508.687] (II) intel(1): 640x480@75Hz
- [ 1508.687] (II) intel(1): 800x600@56Hz
- [ 1508.687] (II) intel(1): 800x600@60Hz
- [ 1508.687] (II) intel(1): 800x600@72Hz
- [ 1508.687] (II) intel(1): 800x600@75Hz
- [ 1508.687] (II) intel(1): 832x624@75Hz
- [ 1508.687] (II) intel(1): 1024x768@60Hz
- [ 1508.687] (II) intel(1): 1024x768@70Hz
- [ 1508.687] (II) intel(1): 1024x768@75Hz
- [ 1508.687] (II) intel(1): 1280x1024@75Hz
- [ 1508.687] (II) intel(1): 1152x864@75Hz
- [ 1508.687] (II) intel(1): Manufacturer's mask: 0
- [ 1508.687] (II) intel(1): Supported standard timings:
- [ 1508.687] (II) intel(1): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
- [ 1508.687] (II) intel(1): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
- [ 1508.687] (II) intel(1): Supported detailed timing:
- [ 1508.687] (II) intel(1): clock: 108.0 MHz Image Size: 376 x 301 mm
- [ 1508.687] (II) intel(1): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
- [ 1508.687] (II) intel(1): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
- [ 1508.687] (II) intel(1): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
- [ 1508.687] (II) intel(1): Monitor name: SyncMaster
- [ 1508.687] (II) intel(1): Serial No: HMEX712331
- [ 1508.687] (II) intel(1): EDID (in hex):
- [ 1508.687] (II) intel(1): 00ffffffffffff004c2d0f0139314a4d
- [ 1508.687] (II) intel(1): 1e0e010380261e782aee95a3544c9926
- [ 1508.687] (II) intel(1): 0f5054bfef808180714f010101010101
- [ 1508.687] (II) intel(1): 010101010101302a009851002a403070
- [ 1508.687] (II) intel(1): 1300782d1100001e000000fd00384b1e
- [ 1508.687] (II) intel(1): 510e000a202020202020000000fc0053
- [ 1508.687] (II) intel(1): 796e634d61737465720a2020000000ff
- [ 1508.687] (II) intel(1): 00484d45583731323333310a202000bd
- [ 1508.687] (II) intel(1): Printing probed modes for output HDMI1
- [ 1508.687] (II) intel(1): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
- [ 1508.687] (II) intel(1): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
- [ 1508.687] (II) intel(1): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
- [ 1508.687] (II) intel(1): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
- [ 1508.687] (II) intel(1): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
- [ 1508.687] (II) intel(1): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
- [ 1508.687] (II) intel(1): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
- [ 1508.687] (II) intel(1): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
- [ 1508.687] (II) intel(1): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
- [ 1508.687] (II) intel(1): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
- [ 1508.687] (II) intel(1): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
- [ 1508.687] (II) intel(1): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
- [ 1508.687] (II) intel(1): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
- [ 1508.687] (II) intel(1): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
- [ 1508.687] (II) intel(1): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
- [ 1508.687] (II) intel(1): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
- [ 1508.726] (II) intel(1): EDID for output DP1
- [ 1509.259] (II) intel(1): EDID for output HDMI2
- [ 1509.284] (II) intel(1): EDID for output HDMI3
- [ 1509.323] (II) intel(1): EDID for output DP2
- [ 1509.363] (II) intel(1): EDID for output DP3
- [ 1509.363] (II) intel(1): Output VGA1 disconnected
- [ 1509.363] (II) intel(1): Output HDMI1 connected
- [ 1509.363] (II) intel(1): Output DP1 disconnected
- [ 1509.363] (II) intel(1): Output HDMI2 disconnected
- [ 1509.363] (II) intel(1): Output HDMI3 disconnected
- [ 1509.363] (II) intel(1): Output DP2 disconnected
- [ 1509.363] (II) intel(1): Output DP3 disconnected
- [ 1509.363] (II) intel(1): Using exact sizes for initial modes
- [ 1509.363] (II) intel(1): Output HDMI1 using initial mode 1280x1024
- [ 1509.363] (II) intel(1): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
- [ 1509.363] (II) intel(1): Kernel page flipping support detected, enabling
- [ 1509.363] (==) intel(1): DPI set to (96, 96)
- [ 1509.363] (II) Loading sub module "fb"
- [ 1509.363] (II) LoadModule: "fb"
- [ 1509.363] (II) Loading /usr/lib/xorg/modules/libfb.so
- [ 1509.363] (II) Module fb: vendor="X.Org Foundation"
- [ 1509.363] compiled for 1.12.2, module version = 1.0.0
- [ 1509.363] ABI class: X.Org ANSI C Emulation, version 0.4
- [ 1509.363] (II) Loading sub module "dri2"
- [ 1509.363] (II) LoadModule: "dri2"
- [ 1509.363] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
- [ 1509.363] (II) Module dri2: vendor="X.Org Foundation"
- [ 1509.363] compiled for 1.12.2, module version = 1.2.0
- [ 1509.363] ABI class: X.Org Server Extension, version 6.0
- [ 1509.363] (--) Depth 24 pixmap format is 32 bpp
- [ 1509.363] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
- [ 1509.363] (II) NVIDIA: access.
- [ 1509.365] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
- [ 1509.365] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
- [ 1509.365] (II) NVIDIA(0): configuration option may not be set correctly. When the
- [ 1509.365] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
- [ 1509.365] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
- [ 1509.365] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
- [ 1509.365] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
- [ 1509.365] (II) NVIDIA(0): Config Options in the README.
- [ 1509.367] (II) NVIDIA(0): Setting mode
- [ 1509.367] (II) NVIDIA(0): "DFP-0:nvidia-auto-select+1024+0,DFP-2:nvidia-auto-select{Rotation=left}"
- [ 1509.446] (II) Loading extension NV-GLX
- [ 1509.555] (==) NVIDIA(0): Disabling shared memory pixmaps
- [ 1509.555] (==) NVIDIA(0): Backing store disabled
- [ 1509.555] (==) NVIDIA(0): Silken mouse enabled
- [ 1509.555] (==) NVIDIA(0): DPMS enabled
- [ 1509.555] (II) Loading extension NV-CONTROL
- [ 1509.555] (WW) NVIDIA(0): Option "LeftOf" is not used
- [ 1509.555] (II) Loading sub module "dri2"
- [ 1509.555] (II) LoadModule: "dri2"
- [ 1509.555] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
- [ 1509.555] (II) Module dri2: vendor="X.Org Foundation"
- [ 1509.555] compiled for 1.12.2, module version = 1.2.0
- [ 1509.555] ABI class: X.Org Server Extension, version 6.0
- [ 1509.555] (II) NVIDIA(0): [DRI2] Setup complete
- [ 1509.555] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
- [ 1509.555] (WW) NVIDIA(0): Not registering RandR
- [ 1509.555] (==) RandR enabled
- [ 1509.555] (II) intel(1): [DRI2] Setup complete
- [ 1509.555] (II) intel(1): [DRI2] DRI driver: i965
- [ 1509.555] (II) intel(1): Allocated new frame buffer 1024x1280 stride 4096, tiled
- [ 1509.556] (II) UXA(1): Driver registered support for the following operations:
- [ 1509.556] (II) solid
- [ 1509.556] (II) copy
- [ 1509.556] (II) composite (RENDER acceleration)
- [ 1509.556] (II) put_image
- [ 1509.556] (II) get_image
- [ 1509.556] (==) intel(1): Backing store disabled
- [ 1509.556] (==) intel(1): Silken mouse enabled
- [ 1509.556] (II) intel(1): Initializing HW Cursor
- [ 1509.556] (II) intel(1): RandR 1.2 enabled, ignore the following RandR disabled message.
- [ 1509.556] (==) intel(1): DPMS enabled
- [ 1509.556] (==) intel(1): Intel XvMC decoder enabled
- [ 1509.556] (II) intel(1): Set up textured video
- [ 1509.556] (II) intel(1): [XvMC] xvmc_vld driver initialized.
- [ 1509.556] (II) intel(1): direct rendering: DRI2 Enabled
- [ 1509.556] (WW) intel(1): Option "Rotate" is not used
- [ 1509.556] (==) intel(1): hotplug detection: "enabled"
- [ 1509.556] (II) intel(1): Allocated new frame buffer 1280x1024 stride 5120, tiled
- [ 1509.613] (--) RandR disabled
- [ 1509.613] (II) Initializing built-in extension Generic Event Extension
- [ 1509.613] (II) Initializing built-in extension SHAPE
- [ 1509.613] (II) Initializing built-in extension MIT-SHM
- [ 1509.613] (II) Initializing built-in extension XInputExtension
- [ 1509.613] (II) Initializing built-in extension XTEST
- [ 1509.613] (II) Initializing built-in extension BIG-REQUESTS
- [ 1509.613] (II) Initializing built-in extension SYNC
- [ 1509.613] (II) Initializing built-in extension XKEYBOARD
- [ 1509.613] (II) Initializing built-in extension XC-MISC
- [ 1509.613] (II) Initializing built-in extension SECURITY
- [ 1509.613] (II) Initializing built-in extension XINERAMA
- [ 1509.613] (II) Initializing built-in extension XFIXES
- [ 1509.613] (II) Initializing built-in extension RENDER
- [ 1509.613] (II) Initializing built-in extension RANDR
- [ 1509.613] (II) Initializing built-in extension COMPOSITE
- [ 1509.613] (II) Initializing built-in extension DAMAGE
- [ 1509.616] (II) AIGLX: Screen 0 is not DRI2 capable
- [ 1509.616] (II) AIGLX: Screen 0 is not DRI capable
- [ 1509.619] (II) AIGLX: Loaded and initialized swrast
- [ 1509.619] (II) GLX: Initialized DRISWRAST GL provider for screen 0
- [ 1509.619] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
- [ 1509.619] (II) AIGLX: enabled GLX_INTEL_swap_event
- [ 1509.619] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
- [ 1509.619] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
- [ 1509.619] (II) AIGLX: Loaded and initialized i965
- [ 1509.619] (II) GLX: Initialized DRI2 GL provider for screen 1
- [ 1509.645] (II) config/udev: Adding input device Power Button (/dev/input/event4)
- [ 1509.645] (**) Power Button: Applying InputClass "evdev keyboard catchall"
- [ 1509.645] (II) LoadModule: "evdev"
- [ 1509.645] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
- [ 1509.645] (II) Module evdev: vendor="X.Org Foundation"
- [ 1509.645] compiled for 1.12.0, module version = 2.7.0
- [ 1509.645] Module class: X.Org XInput Driver
- [ 1509.645] ABI class: X.Org XInput driver, version 16.0
- [ 1509.645] (II) Using input driver 'evdev' for 'Power Button'
- [ 1509.645] (**) Power Button: always reports core events
- [ 1509.646] (**) evdev: Power Button: Device: "/dev/input/event4"
- [ 1509.646] (--) evdev: Power Button: Vendor 0 Product 0x1
- [ 1509.646] (--) evdev: Power Button: Found keys
- [ 1509.646] (II) evdev: Power Button: Configuring as keyboard
- [ 1509.646] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
- [ 1509.646] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
- [ 1509.646] (**) Option "xkb_rules" "evdev"
- [ 1509.646] (**) Option "xkb_model" "evdev"
- [ 1509.646] (**) Option "xkb_layout" "us"
- [ 1509.659] (II) config/udev: Adding input device Power Button (/dev/input/event3)
- [ 1509.659] (**) Power Button: Applying InputClass "evdev keyboard catchall"
- [ 1509.659] (II) Using input driver 'evdev' for 'Power Button'
- [ 1509.659] (**) Power Button: always reports core events
- [ 1509.659] (**) evdev: Power Button: Device: "/dev/input/event3"
- [ 1509.659] (--) evdev: Power Button: Vendor 0 Product 0x1
- [ 1509.659] (--) evdev: Power Button: Found keys
- [ 1509.659] (II) evdev: Power Button: Configuring as keyboard
- [ 1509.659] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
- [ 1509.659] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
- [ 1509.659] (**) Option "xkb_rules" "evdev"
- [ 1509.659] (**) Option "xkb_model" "evdev"
- [ 1509.659] (**) Option "xkb_layout" "us"
- [ 1509.659] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event12)
- [ 1509.659] (II) No input driver specified, ignoring this device.
- [ 1509.659] (II) This device may have been added with another device file.
- [ 1509.660] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event13)
- [ 1509.660] (II) No input driver specified, ignoring this device.
- [ 1509.660] (II) This device may have been added with another device file.
- [ 1509.660] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event14)
- [ 1509.660] (II) No input driver specified, ignoring this device.
- [ 1509.660] (II) This device may have been added with another device file.
- [ 1509.660] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event15)
- [ 1509.660] (II) No input driver specified, ignoring this device.
- [ 1509.660] (II) This device may have been added with another device file.
- [ 1509.660] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event10)
- [ 1509.660] (II) No input driver specified, ignoring this device.
- [ 1509.660] (II) This device may have been added with another device file.
- [ 1509.660] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event11)
- [ 1509.660] (II) No input driver specified, ignoring this device.
- [ 1509.660] (II) This device may have been added with another device file.
- [ 1509.660] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event5)
- [ 1509.660] (II) No input driver specified, ignoring this device.
- [ 1509.660] (II) This device may have been added with another device file.
- [ 1509.660] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event6)
- [ 1509.660] (II) No input driver specified, ignoring this device.
- [ 1509.660] (II) This device may have been added with another device file.
- [ 1509.660] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event7)
- [ 1509.660] (II) No input driver specified, ignoring this device.
- [ 1509.660] (II) This device may have been added with another device file.
- [ 1509.661] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event8)
- [ 1509.661] (II) No input driver specified, ignoring this device.
- [ 1509.661] (II) This device may have been added with another device file.
- [ 1509.661] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event9)
- [ 1509.661] (II) No input driver specified, ignoring this device.
- [ 1509.661] (II) This device may have been added with another device file.
- [ 1509.661] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/event1)
- [ 1509.661] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Applying InputClass "evdev pointer catchall"
- [ 1509.661] (II) Using input driver 'evdev' for 'Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)'
- [ 1509.661] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): always reports core events
- [ 1509.661] (**) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Device: "/dev/input/event1"
- [ 1509.661] (--) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Vendor 0x45e Product 0x40
- [ 1509.661] (--) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found 3 mouse buttons
- [ 1509.661] (--) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found scroll wheel(s)
- [ 1509.661] (--) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found relative axes
- [ 1509.661] (--) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found x and y relative axes
- [ 1509.661] (II) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Configuring as mouse
- [ 1509.661] (II) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Adding scrollwheel support
- [ 1509.661] (**) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): YAxisMapping: buttons 4 and 5
- [ 1509.661] (**) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
- [ 1509.661] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.4/4-1.4:1.0/input/input1/event1"
- [ 1509.661] (II) XINPUT: Adding extended input device "Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)" (type: MOUSE, id 8)
- [ 1509.661] (II) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): initialized for relative axes.
- [ 1509.661] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) keeping acceleration scheme 1
- [ 1509.661] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration profile 0
- [ 1509.661] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration factor: 2.000
- [ 1509.661] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration threshold: 4
- [ 1509.661] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/mouse0)
- [ 1509.661] (II) No input driver specified, ignoring this device.
- [ 1509.661] (II) This device may have been added with another device file.
- [ 1509.661] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
- [ 1509.661] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
- [ 1509.661] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
- [ 1509.661] (**) AT Translated Set 2 keyboard: always reports core events
- [ 1509.661] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
- [ 1509.662] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
- [ 1509.662] (--) evdev: AT Translated Set 2 keyboard: Found keys
- [ 1509.662] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
- [ 1509.662] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
- [ 1509.662] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
- [ 1509.662] (**) Option "xkb_rules" "evdev"
- [ 1509.662] (**) Option "xkb_model" "evdev"
- [ 1509.662] (**) Option "xkb_layout" "us"
- [ 1509.662] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
- [ 1509.662] (II) No input driver specified, ignoring this device.
- [ 1509.662] (II) This device may have been added with another device file.
Advertisement
Add Comment
Please, Sign In to add comment