API tools faq
paste
Guest User

dmesg-log

a guest
Nov 8th, 2016
90
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 20.43 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Linux version 4.1.15-gfcea7a1-dirty (root@blackhole) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.1) ) #26 SMP PREEMPT Tue Sep 27 11:38:15 CEST 2016
  3. [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=50c53c7d
  4. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. [ 0.000000] Machine model: UDOO Neo Extended
  6. [ 0.000000] Reserved memory: created CMA memory pool at 0xaa000000, size 320 MiB
  7. [ 0.000000] Reserved memory: initialized node linux,cma, compatible id shared-dma-pool
  8. [ 0.000000] Memory policy: Data cache writealloc
  9. [ 0.000000] On node 0 totalpages: 259840
  10. [ 0.000000] free_area_init_node: node 0, pgdat 80690740, node_mem_map bf657000
  11. [ 0.000000] Normal zone: 2048 pages used for memmap
  12. [ 0.000000] Normal zone: 0 pages reserved
  13. [ 0.000000] Normal zone: 259840 pages, LIFO batch:31
  14. [ 0.000000] PERCPU: Embedded 11 pages/cpu @bf61c000 s16332 r8192 d20532 u45056
  15. [ 0.000000] pcpu-alloc: s16332 r8192 d20532 u45056 alloc=11*4096
  16. [ 0.000000] pcpu-alloc: [0] 0
  17. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257792
  18. [ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait rw rootfstype=ext4 uart_from_osc clk_ignore_unused cpuidle.off=1 consoleblank=0
  19. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  20. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  21. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  22. [ 0.000000] Memory: 694640K/1039360K available (4179K kernel code, 262K rwdata, 2040K rodata, 208K init, 390K bss, 17040K reserved, 327680K cma-reserved, 0K highmem)
  23. [ 0.000000] Virtual kernel memory layout:
  24. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  25. fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  26. vmalloc : 0xc0800000 - 0xff000000 (1000 MB)
  27. lowmem : 0x80000000 - 0xc0000000 (1024 MB)
  28. pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
  29. modules : 0x7f800000 - 0x7fe00000 ( 6 MB)
  30. .text : 0x80008000 - 0x8061b0f0 (6221 kB)
  31. .init : 0x8061c000 - 0x80650000 ( 208 kB)
  32. .data : 0x80650000 - 0x80691820 ( 263 kB)
  33. .bss : 0x80694000 - 0x806f585c ( 391 kB)
  34. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  35. [ 0.000000] Preemptible hierarchical RCU implementation.
  36. [ 0.000000] Additional per-CPU info printed with stalls.
  37. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
  38. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
  39. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  40. [ 0.000000] L2C-310 erratum 769419 enabled
  41. [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
  42. [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
  43. [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines
  44. [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
  45. [ 0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB
  46. [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76430001
  47. [ 0.000000] mxc_clocksource_init 3000000
  48. [ 0.000000] Switching to timer-based delay loop, resolution 333ns
  49. [ 0.000006] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns
  50. [ 0.000023] clocksource mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
  51. [ 0.001536] Console: colour dummy device 80x30
  52. [ 0.001553] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000)
  53. [ 0.001567] pid_max: default: 32768 minimum: 301
  54. [ 0.001669] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  55. [ 0.001683] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  56. [ 0.002239] Initializing cgroup subsys devices
  57. [ 0.002260] Initializing cgroup subsys freezer
  58. [ 0.002288] CPU: Testing write buffer coherency: ok
  59. [ 0.002504] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  60. [ 0.002569] Setting up static identity map for 0x80008240 - 0x8000828c
  61. [ 0.040419] Brought up 1 CPUs
  62. [ 0.040433] SMP: Total of 1 processors activated (6.00 BogoMIPS).
  63. [ 0.040443] CPU: All CPU(s) started in SVC mode.
  64. [ 0.040874] devtmpfs: initialized
  65. [ 0.050630] device-tree: Duplicate name in lcdif@02220000, renamed to "display#1"
  66. [ 0.054507] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  67. [ 0.054895] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  68. [ 0.073827] pinctrl core: initialized pinctrl subsystem
  69. [ 0.074968] NET: Registered protocol family 16
  70. [ 0.083754] DMA: preallocated 256 KiB pool for atomic coherent allocations
  71. [ 0.091269] GPIO mask to reserved irq for M4 Core = 0x00000350
  72. [ 0.091990] GPIO mask to reserved irq for M4 Core = 0x003cf000
  73. [ 0.092696] GPIO mask to reserved irq for M4 Core = 0x000c0000
  74. [ 0.110237] imx6sx-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
  75. [ 0.112214] MU is ready for cross core communication!
  76. [ 0.123712] mxs-dma 1804000.dma-apbh: initialized
  77. [ 0.127280] SCSI subsystem initialized
  78. [ 0.127504] libata version 3.00 loaded.
  79. [ 0.127875] 2000000.aips-bus:usbphy_nop1 supply vcc not found, using dummy regulator
  80. [ 0.128954] i2c i2c-0: IMX I2C adapter registered
  81. [ 0.128974] i2c i2c-0: can't use DMA
  82. [ 0.129806] i2c i2c-1: IMX I2C adapter registered
  83. [ 0.129824] i2c i2c-1: can't use DMA
  84. [ 0.130340] i2c i2c-2: IMX I2C adapter registered
  85. [ 0.130358] i2c i2c-2: can't use DMA
  86. [ 0.131173] i2c i2c-3: IMX I2C adapter registered
  87. [ 0.131191] i2c i2c-3: can't use DMA
  88. [ 0.131328] Linux video capture interface: v2.00
  89. [ 0.131387] pps_core: LinuxPPS API ver. 1 registered
  90. [ 0.131396] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  91. [ 0.131437] PTP clock support registered
  92. [ 0.132901] Advanced Linux Sound Architecture Driver Initialized.
  93. [ 0.134850] Switched to clocksource mxc_timer1
  94. [ 0.146331] NET: Registered protocol family 2
  95. [ 0.146971] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  96. [ 0.147060] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  97. [ 0.147184] TCP: Hash tables configured (established 8192 bind 8192)
  98. [ 0.147263] UDP hash table entries: 512 (order: 2, 16384 bytes)
  99. [ 0.147301] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  100. [ 0.147507] NET: Registered protocol family 1
  101. [ 0.148116] imx rpmsg driver is registered.
  102. [ 0.149297] Bus freq driver module loaded
  103. [ 0.150312] futex hash table entries: 256 (order: 2, 16384 bytes)
  104. [ 0.157801] VFS: Disk quotas dquot_6.6.0
  105. [ 0.158023] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  106. [ 0.163801] io scheduler noop registered
  107. [ 0.163825] io scheduler deadline registered
  108. [ 0.164042] io scheduler cfq registered (default)
  109. [ 0.164578] imx-weim 21b8000.weim: Driver registered.
  110. [ 0.165957] MIPI DSI driver module loaded
  111. [ 0.166202] MIPI DSI driver module loaded
  112. [ 0.295783] tda19988 2-0034: Sucessfully initialised chip revision 301
  113. [ 0.403077] mxsfb 2220000.lcdif: failed to find mxc display driver
  114. [ 0.423571] Console: switching to colour frame buffer device 160x45
  115. [ 0.469545] tda19988 2-0034: Matching CEA mode is 4 for fb mode 1280x720-60
  116. [ 0.522120] mxsfb 2220000.lcdif: initialized
  117. [ 0.525367] imx-sdma 20ec000.sdma: no iram assigned, using external mem
  118. [ 0.527171] imx-sdma 20ec000.sdma: no event needs to be remapped
  119. [ 0.528174] imx-sdma 20ec000.sdma: loaded firmware 3.3
  120. [ 0.531456] imx-sdma 20ec000.sdma: initialized
  121. [ 0.533193] pfuze100-regulator 0-0008: Full layer: 1, Metal layer: 1
  122. [ 0.533767] pfuze100-regulator 0-0008: FAB: 0, FIN: 0
  123. [ 0.533781] pfuze100-regulator 0-0008: pfuze3000 found.
  124. [ 0.547064] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 22, base_baud = 1500000) is a IMX
  125. [ 1.232131] console [ttymxc0] enabled
  126. [ 1.236757] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 283, base_baud = 1500000) is a IMX
  127. [ 1.248157] imx sema4 driver is registered.
  128. [ 1.252422] [drm] Initialized drm 1.1.0 20060810
  129. [ 1.257633] [drm] Initialized vivante 1.0.0 20120216 on minor 0
  130. [ 1.269622] loop: module loaded
  131. [ 1.274031] input: fxos8700 as /devices/soc0/soc/2100000.aips-bus/21f8000.i2c/i2c-3/3-001e/input/input0
  132. [ 1.285565] fxos8700 device driver probe successfully
  133. [ 1.291574] input: fxas2100x as /devices/soc0/soc/2100000.aips-bus/21f8000.i2c/i2c-3/3-0020/input/input1
  134. [ 1.301740] fxas2100x 3-0020: fxas2100x device driver probe successfully
  135. [ 1.312544] mousedev: PS/2 mouse device common for all mice
  136. [ 1.319738] read mpl3115 chip id 0xfffffffb
  137. [ 1.323941] mpl3115 1-0060: read chip ID 0x1 is not equal to 0xc4!
  138. [ 1.330204] mpl3115: probe of 1-0060 failed with error -22
  139. [ 1.336377] i2c /dev entries driver
  140. [ 1.341720] pxp-v4l2 pxp_v4l2_out: initialized
  141. [ 1.348492] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
  142. [ 1.354953] sdhci: Secure Digital Host Controller Interface driver
  143. [ 1.361146] sdhci: Copyright(c) Pierre Ossman
  144. [ 1.365544] sdhci-pltfm: SDHCI platform and OF driver helper
  145. [ 1.372387] /soc/aips-bus@02100000/usdhc@02194000: voltage-ranges unspecified
  146. [ 1.379611] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO
  147. [ 1.385944] sdhci-esdhc-imx 2194000.usdhc: No vqmmc regulator found
  148. [ 1.435100] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
  149. [ 1.446002] /soc/aips-bus@02100000/usdhc@02198000: voltage-ranges unspecified
  150. [ 1.458268] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode
  151. [ 1.472646] sdhci-esdhc-imx 2198000.usdhc: No vqmmc regulator found
  152. [ 1.522470] mmc0: host does not support reading read-only switch, assuming write-enable
  153. [ 1.536532] mmc0: new high speed SDHC card at address 59b4
  154. [ 1.542437] mmcblk0: mmc0:59b4 NCard 29.5 GiB
  155. [ 1.548222] mmcblk0: p1 p2
  156. [ 1.594926] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA
  157. [ 1.611851] galcore: clk_get 2d core clock failed, disable 2d/vg!
  158. [ 1.621304] Galcore version 5.0.11.41671
  159. [ 1.627691] sdhci-esdhc-imx 2198000.usdhc: card claims to support voltages below defined range
  160. [ 1.667207] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
  161. [ 1.686209] mmc2: new high speed SDIO card at address 0001
  162. [ 1.941400] caam 2100000.caam: Entropy delay = 3200
  163. [ 2.067889] caam 2100000.caam: Entropy delay = 3600
  164. [ 2.141132] caam 2100000.caam: Instantiated RNG4 SH0
  165. [ 2.277809] caam 2100000.caam: Entropy delay = 4000
  166. [ 2.434539] caam 2100000.caam: Instantiated RNG4 SH1
  167. [ 2.439532] caam 2100000.caam: device ID = 0x0a16010000000200 (Era -524)
  168. [ 2.446260] caam 2100000.caam: job rings = 2, qi = 0
  169. [ 2.510880] caam algorithms registered in /proc/crypto
  170. [ 2.520171] caam_jr 2101000.jr0: registering rng-caam
  171. [ 2.525631] snvs-secvio 20cc000.caam-snvs: can't get snvs clock
  172. [ 2.531620] snvs-secvio 20cc000.caam-snvs: violation handlers armed - non-secure state
  173. [ 2.543338] fsl-asrc 2034000.asrc: driver registered
  174. [ 2.553430] imx-tda19988 sound: tda19988-codec <-> 202c000.ssi mapping ok
  175. [ 2.561164] nf_conntrack version 0.5.0 (15973 buckets, 63892 max)
  176. [ 2.568082] NET: Registered protocol family 17
  177. [ 2.572589] Key type dns_resolver registered
  178. [ 2.577667] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
  179. [ 2.604863] failed to register cpuidle driver
  180. [ 2.609246] ThumbEE CPU extension supported.
  181. [ 2.616333] hctosys: unable to open rtc device (rtc0)
  182. [ 2.632552] VLDO2: disabling
  183. [ 2.636015] wlan-en-regulator: disabling
  184. [ 2.639947] vref-3v3: disabling
  185. [ 2.643092] PSU-5V0: disabling
  186. [ 2.646386] usb_otg2_vbus: disabling
  187. [ 2.649997] usb_otg1_vbus: disabling
  188. [ 2.653603] vddpcie-phy: disabling
  189. [ 2.657121] clk: Not disabling unused clocks
  190. [ 2.661404] ALSA device list:
  191. [ 2.664377] #0: imx-audio-tda19988
  192. [ 3.508531] EXT4-fs (mmcblk0p2): recovery complete
  193. [ 3.517712] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  194. [ 3.526060] VFS: Mounted root (ext4 filesystem) on device 179:2.
  195. [ 3.532398] devtmpfs: mounted
  196. [ 3.536303] Freeing unused kernel memory: 208K (8061c000 - 80650000)
  197. [ 4.010832] systemd[1]: System time before build time, advancing clock.
  198. [ 4.067578] NET: Registered protocol family 10
  199. [ 4.103415] random: systemd urandom read with 36 bits of entropy available
  200. [ 4.113383] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
  201. [ 4.132117] systemd[1]: Detected architecture arm.
  202. [ 4.176009] systemd[1]: Set hostname to <udooneo>.
  203. [ 4.706352] systemd[1]: Listening on udev Control Socket.
  204. [ 4.735222] systemd[1]: Listening on udev Kernel Socket.
  205. [ 4.755233] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  206. [ 4.785712] systemd[1]: Listening on Journal Socket.
  207. [ 4.805356] systemd[1]: Reached target Swap.
  208. [ 4.825659] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  209. [ 4.855516] systemd[1]: Listening on Journal Socket (/dev/log).
  210. [ 4.875251] systemd[1]: Reached target Remote File Systems (Pre).
  211. [ 4.895211] systemd[1]: Reached target Remote File Systems.
  212. [ 4.916566] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  213. [ 4.945279] systemd[1]: Reached target User and Group Name Lookups.
  214. [ 4.977112] systemd[1]: Created slice System Slice.
  215. [ 5.007117] systemd[1]: Mounting Debug File System...
  216. [ 5.037249] systemd[1]: Starting Remount Root and Kernel File Systems...
  217. [ 5.080793] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  218. [ 5.137482] systemd[1]: Starting Set console keymap...
  219. [ 5.152528] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  220. [ 5.160672] systemd[1]: Created slice system-serial\x2dgetty.slice.
  221. [ 5.185140] systemd[1]: Reached target Encrypted Volumes.
  222. [ 5.225285] systemd[1]: Listening on Syslog Socket.
  223. [ 5.246987] systemd[1]: Starting Journal Service...
  224. [ 5.266567] systemd[1]: Created slice User and Session Slice.
  225. [ 5.285357] systemd[1]: Reached target Slices.
  226. [ 5.309878] systemd[1]: Starting Load Kernel Modules...
  227. [ 5.356726] systemd[1]: Starting Nameserver information manager...
  228. [ 5.404154] systemd[1]: Mounted Debug File System.
  229. [ 5.436481] systemd[1]: Started Remount Root and Kernel File Systems.
  230. [ 5.485315] systemd[1]: Started Create list of required static device nodes for the current kernel.
  231. [ 5.506124] systemd[1]: Started Set console keymap.
  232. [ 5.526335] systemd[1]: Started Load Kernel Modules.
  233. [ 5.553940] systemd[1]: Started Journal Service.
  234. [ 6.206220] systemd-journald[164]: Received request to flush runtime journal from PID 1
  235. [ 6.871225] (stk) :sysfs entries created
  236. [ 6.905008] Bluetooth: Core ver 2.20
  237. [ 6.905085] NET: Registered protocol family 31
  238. [ 6.905094] Bluetooth: HCI device and connection manager initialized
  239. [ 6.905112] Bluetooth: HCI socket layer initialized
  240. [ 6.905125] Bluetooth: L2CAP socket layer initialized
  241. [ 6.905169] Bluetooth: SCO socket layer initialized
  242. [ 6.909904] hdev a8783000
  243. [ 6.920916] HCI device registered (hdev a8783000)
  244. [ 6.921394] hci0 a8783000
  245. [ 6.921407] (stc): chnl_id list empty :4
  246. [ 6.921414] (stk) : st_kim_start
  247. [ 7.037008] (stk) :ldisc_install = 1
  248. [ 7.194419] usbcore: registered new interface driver usbfs
  249. [ 7.194504] usbcore: registered new interface driver hub
  250. [ 7.239223] usbcore: registered new device driver usb
  251. [ 7.266182] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  252. [ 7.331329] 2184800.usbmisc supply vbus-wakeup not found, using dummy regulator
  253. [ 7.378891] ci_hdrc ci_hdrc.1: EHCI Host Controller
  254. [ 7.378933] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
  255. [ 7.408839] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
  256. [ 7.409022] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  257. [ 7.409033] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  258. [ 7.409042] usb usb1: Product: EHCI Host Controller
  259. [ 7.409053] usb usb1: Manufacturer: Linux 4.1.15-gfcea7a1-dirty ehci_hcd
  260. [ 7.409061] usb usb1: SerialNumber: ci_hdrc.1
  261. [ 7.412083] hub 1-0:1.0: USB hub found
  262. [ 7.423913] hub 1-0:1.0: 1 port detected
  263. [ 7.894000] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  264. [ 8.034922] (stk) :ldisc installation timeout
  265. [ 8.039124] (stk) :ldisc_install = 0
  266. [ 8.284783] cfg80211: World regulatory domain updated:
  267. [ 8.284791] cfg80211: DFS Master region: unset
  268. [ 8.284791] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  269. [ 8.284799] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  270. [ 8.284804] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  271. [ 8.284809] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  272. [ 8.284815] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  273. [ 8.284821] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
  274. [ 8.284826] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  275. [ 8.284831] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  276. [ 8.302602] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  277. [ 9.034940] (stk) : timed out waiting for ldisc to be un-installed
  278. [ 9.147972] (stk) :ldisc_install = 1
  279. [ 10.053177] cgroup: new mount options do not match the existing superblock, will be ignored
  280. [ 10.145763] (stk) :ldisc installation timeout
  281. [ 10.149963] (stk) :ldisc_install = 0
  282. [ 11.144928] (stk) : timed out waiting for ldisc to be un-installed
  283. [ 11.256765] (stk) :ldisc_install = 1
  284. [ 11.273652] random: nonblocking pool is initialized
  285. [ 11.344943] misc FreescaleGyroscope: mma enable setting active
  286. [ 12.095530] (stc): st_tty_open
  287. [ 12.095565] (stk) :line discipline installed
  288. [ 12.096686] (stk) :ti-connectivity/TIInit_11.8.32.bts
  289. [ 12.180700] (stk) :change remote baud rate command in firmware
  290. [ 12.180714] (stk) :skipping the wait event of change remote baud
  291. [ 15.269033] (stc): add_channel_to_table: id 4
  292. [ 15.269050] (stc): add_channel_to_table: id 2
  293. [ 15.269060] (stc): add_channel_to_table: id 3
  294. [ 15.270143] hci0: type 1 len 4
  295. [ 15.276799] hci0: type 1 len 4
  296. [ 15.286169] hci0: type 1 len 4
  297. [ 15.296256] hci0: type 1 len 4
  298. [ 15.306256] hci0: type 1 len 4
  299. [ 15.316443] hci0: type 1 len 4
  300. [ 15.326113] hci0: type 1 len 4
  301. [ 15.338910] hci0: type 1 len 4
  302. [ 15.348321] hci0: type 1 len 4
  303. [ 15.356280] hci0: type 1 len 4
  304. [ 15.366125] hci0: type 1 len 5
  305. [ 15.376299] hci0: type 1 len 6
  306. [ 15.386128] hci0: type 1 len 4
  307. [ 15.396124] hci0: type 1 len 4
  308. [ 15.406193] hci0: type 1 len 4
  309. [ 15.416161] hci0: type 1 len 4
  310. [ 15.426071] hci0: type 1 len 4
  311. [ 15.436320] hci0: type 1 len 4
  312. [ 15.446859] hci0: type 1 len 245
  313. [ 15.513753] hci0: type 1 len 5
  314. [ 15.514608] hci0: type 1 len 4
  315. [ 15.518013] hci0: type 1 len 5
  316. [ 15.526866] hci0: type 1 len 12
  317. [ 15.536095] hci0: type 1 len 11
  318. [ 15.546126] hci0: type 1 len 6
  319. [ 15.555685] hci0: type 1 len 4
  320. [ 15.566307] hci0: type 1 len 4
  321. [ 15.576059] hci0: type 1 len 12
  322. [ 15.586192] hci0: type 1 len 4
  323. [ 15.596097] hci0: type 1 len 11
  324. [ 15.606096] hci0: type 1 len 4
  325. [ 15.880984] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  326. [ 15.880997] Bluetooth: BNEP filters: protocol multicast
  327. [ 15.881017] Bluetooth: BNEP socket layer initialized
  328. [ 15.924123] hci0: type 1 len 5
  329. [ 15.938608] hci0: type 1 len 6
  330. [ 15.939479] hci0: type 1 len 36
  331. [ 15.946191] hci0: type 1 len 245
  332. [ 15.958542] hci0: type 1 len 7
  333. [ 15.966897] hci0: type 1 len 252
  334. [ 15.978480] hci0: type 1 len 245
  335. [ 15.988577] hci0: type 1 len 36
  336. [ 15.996632] hci0: type 1 len 252
  337. [ 16.008525] hci0: type 1 len 245
  338. [ 16.019216] hci0: type 1 len 36
  339. [ 20.935084] fuse init (API version 7.23)
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!