API tools faq
paste
Advertisement
Guest User

hp8000 hdd data

a guest
Aug 20th, 2013
88
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.32 KB | None | 0 0
raw download clone embed print report
  1. /media/Fujitsu ntfs/hp8000data/Hitachi_HDP725032GLA380_GEK010RG0GMW4A_2013-08-20.txt
  2.  
  3.  
  4. smartctl 6.0 2012-10-10 r3643 [i686-linux-3.7.5-pmagic] (local build)
  5. Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org
  6.  
  7. === START OF INFORMATION SECTION ===
  8. Model Family: Hitachi Deskstar P7K500
  9. Device Model: Hitachi HDP725032GLA380
  10. Serial Number: GEK010RG0GMW4A
  11. LU WWN Device Id: 5 000cca 32bc6a7ce
  12. Firmware Version: GM3OA5CA
  13. User Capacity: 320,072,933,376 bytes [320 GB]
  14. Sector Size: 512 bytes logical/physical
  15. Rotation Rate: 7200 rpm
  16. Device is: In smartctl database [for details use: -P show]
  17. ATA Version is: ATA8-ACS T13/1699-D revision 4
  18. SATA Version is: SATA 2.6, 3.0 Gb/s
  19. Local Time is: Tue Aug 20 11:41:41 2013 UTC
  20. SMART support is: Available - device has SMART capability.
  21. SMART support is: Enabled
  22.  
  23. === START OF READ SMART DATA SECTION ===
  24. SMART overall-health self-assessment test result: PASSED
  25.  
  26. General SMART Values:
  27. Offline data collection status: (0x80) Offline data collection activity
  28. was never started.
  29. Auto Offline Data Collection: Enabled.
  30. Self-test execution status: ( 0) The previous self-test routine completed
  31. without error or no self-test has ever
  32. been run.
  33. Total time to complete Offline
  34. data collection: ( 5908) seconds.
  35. Offline data collection
  36. capabilities: (0x5b) SMART execute Offline immediate.
  37. Auto Offline data collection on/off support.
  38. Suspend Offline collection upon new
  39. command.
  40. Offline surface scan supported.
  41. Self-test supported.
  42. No Conveyance Self-test supported.
  43. Selective Self-test supported.
  44. SMART capabilities: (0x0003) Saves SMART data before entering
  45. power-saving mode.
  46. Supports SMART auto save timer.
  47. Error logging capability: (0x01) Error logging supported.
  48. General Purpose Logging supported.
  49. Short self-test routine
  50. recommended polling time: ( 1) minutes.
  51. Extended self-test routine
  52. recommended polling time: ( 98) minutes.
  53. SCT capabilities: (0x003d) SCT Status supported.
  54. SCT Error Recovery Control supported.
  55. SCT Feature Control supported.
  56. SCT Data Table supported.
  57.  
  58. SMART Attributes Data Structure revision number: 16
  59. Vendor Specific SMART Attributes with Thresholds:
  60. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  61. 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
  62. 2 Throughput_Performance 0x0005 100 100 054 Pre-fail Offline - 0
  63. 3 Spin_Up_Time 0x0007 121 121 024 Pre-fail Always - 318 (Average 316)
  64. 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 117
  65. 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 12
  66. 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
  67. 8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0
  68. 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 29
  69. 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
  70. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 116
  71. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 117
  72. 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 117
  73. 194 Temperature_Celsius 0x0002 146 146 000 Old_age Always - 41 (Min/Max 25/44)
  74. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 12
  75. 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
  76. 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
  77. 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
  78.  
  79. SMART Error Log Version: 1
  80. ATA Error Count: 295 (device log contains only the most recent five errors)
  81. CR = Command Register [HEX]
  82. FR = Features Register [HEX]
  83. SC = Sector Count Register [HEX]
  84. SN = Sector Number Register [HEX]
  85. CL = Cylinder Low Register [HEX]
  86. CH = Cylinder High Register [HEX]
  87. DH = Device/Head Register [HEX]
  88. DC = Device Command Register [HEX]
  89. ER = Error register [HEX]
  90. ST = Status register [HEX]
  91. Powered_Up_Time is measured from power on, and printed as
  92. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  93. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  94.  
  95. Error 295 occurred at disk power-on lifetime: 14 hours (0 days + 14 hours)
  96. When the command that caused the error occurred, the device was active or idle.
  97.  
  98. After command completion occurred, registers were:
  99. ER ST SC SN CL CH DH
  100. -- -- -- -- -- -- --
  101. 40 51 05 aa b7 60 e0 Error: UNC 5 sectors at LBA = 0x0060b7aa = 6338474
  102.  
  103. Commands leading to the command that caused the error were:
  104. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  105. -- -- -- -- -- -- -- -- ---------------- --------------------
  106. 25 00 08 a7 b7 60 e0 00 00:00:21.600 READ DMA EXT
  107. ef 03 46 00 00 00 a0 00 00:00:21.600 SET FEATURES [Set transfer mode]
  108. 25 00 05 aa b7 60 e0 04 00:00:21.600 READ DMA EXT
  109. 25 00 08 a7 b7 60 e0 00 00:00:17.300 READ DMA EXT
  110. 25 00 08 17 5a 36 e0 00 00:00:17.300 READ DMA EXT
  111.  
  112. Error 294 occurred at disk power-on lifetime: 14 hours (0 days + 14 hours)
  113. When the command that caused the error occurred, the device was active or idle.
  114.  
  115. After command completion occurred, registers were:
  116. ER ST SC SN CL CH DH
  117. -- -- -- -- -- -- --
  118. 40 51 05 aa b7 60 e0 Error: UNC 5 sectors at LBA = 0x0060b7aa = 6338474
  119.  
  120. Commands leading to the command that caused the error were:
  121. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  122. -- -- -- -- -- -- -- -- ---------------- --------------------
  123. 25 00 08 a7 b7 60 e0 00 00:00:17.300 READ DMA EXT
  124. 25 00 08 17 5a 36 e0 00 00:00:17.300 READ DMA EXT
  125. 25 00 08 8f f3 62 e0 00 00:00:17.300 READ DMA EXT
  126. 25 00 08 37 5b 2e e0 00 00:00:17.300 READ DMA EXT
  127. 25 00 08 17 f2 62 e0 00 00:00:17.300 READ DMA EXT
  128.  
  129. Error 293 occurred at disk power-on lifetime: 14 hours (0 days + 14 hours)
  130. When the command that caused the error occurred, the device was active or idle.
  131.  
  132. After command completion occurred, registers were:
  133. ER ST SC SN CL CH DH
  134. -- -- -- -- -- -- --
  135. 40 51 05 aa b7 60 e0 Error: UNC 5 sectors at LBA = 0x0060b7aa = 6338474
  136.  
  137. Commands leading to the command that caused the error were:
  138. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  139. -- -- -- -- -- -- -- -- ---------------- --------------------
  140. 25 d8 08 a7 b7 60 e0 00 00:00:48.800 READ DMA EXT
  141. 25 d8 08 a7 b7 60 e0 00 00:00:44.500 READ DMA EXT
  142. 25 d8 08 17 5a 36 e0 00 00:00:44.500 READ DMA EXT
  143. 25 d8 08 8f f3 62 e0 00 00:00:44.500 READ DMA EXT
  144. 25 d8 08 37 5b 2e e0 00 00:00:44.500 READ DMA EXT
  145.  
  146. Error 292 occurred at disk power-on lifetime: 14 hours (0 days + 14 hours)
  147. When the command that caused the error occurred, the device was active or idle.
  148.  
  149. After command completion occurred, registers were:
  150. ER ST SC SN CL CH DH
  151. -- -- -- -- -- -- --
  152. 40 51 05 aa b7 60 e0 Error: UNC 5 sectors at LBA = 0x0060b7aa = 6338474
  153.  
  154. Commands leading to the command that caused the error were:
  155. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  156. -- -- -- -- -- -- -- -- ---------------- --------------------
  157. 25 d8 08 a7 b7 60 e0 00 00:00:44.500 READ DMA EXT
  158. 25 d8 08 17 5a 36 e0 00 00:00:44.500 READ DMA EXT
  159. 25 d8 08 8f f3 62 e0 00 00:00:44.500 READ DMA EXT
  160. 25 d8 08 37 5b 2e e0 00 00:00:44.500 READ DMA EXT
  161. 25 d8 08 17 f2 62 e0 00 00:00:44.500 READ DMA EXT
  162.  
  163. Error 291 occurred at disk power-on lifetime: 14 hours (0 days + 14 hours)
  164. When the command that caused the error occurred, the device was active or idle.
  165.  
  166. After command completion occurred, registers were:
  167. ER ST SC SN CL CH DH
  168. -- -- -- -- -- -- --
  169. 40 51 05 aa b7 60 e0 Error: UNC 5 sectors at LBA = 0x0060b7aa = 6338474
  170.  
  171. Commands leading to the command that caused the error were:
  172. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  173. -- -- -- -- -- -- -- -- ---------------- --------------------
  174. 25 d8 08 a7 b7 60 e0 00 00:04:17.400 READ DMA EXT
  175. 25 d8 08 a7 b7 60 e0 00 00:04:13.100 READ DMA EXT
  176. 25 d8 08 17 5a 36 e0 00 00:04:13.100 READ DMA EXT
  177. 25 d8 08 8f f3 62 e0 00 00:04:13.100 READ DMA EXT
  178. 25 d8 08 37 5b 2e e0 00 00:04:13.100 READ DMA EXT
  179.  
  180. SMART Self-test log structure revision number 1
  181. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  182. # 1 Short offline Completed without error 00% 29 -
  183.  
  184. SMART Selective self-test log data structure revision number 1
  185. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  186. 1 0 0 Not_testing
  187. 2 0 0 Not_testing
  188. 3 0 0 Not_testing
  189. 4 0 0 Not_testing
  190. 5 0 0 Not_testing
  191. Selective self-test flags (0x0):
  192. After scanning selected spans, do NOT read-scan remainder of disk.
  193. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!