Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ########## wireless info START ##########
- Report from: 28 Apr 2015 13:04 WEST +0100
- Booted last: 28 Apr 2015 03:28 WEST +0100
- Script from: 06 Apr 2015 17:23 UTC +0000
- ##### release ###########################
- Distributor ID: Ubuntu
- Description: Ubuntu 12.04.5 LTS
- Release: 12.04
- Codename: precise
- ##### kernel ############################
- Linux 3.13.0-49-generic #81~precise1-Ubuntu SMP Wed Mar 25 16:32:40 UTC 2015 i686 i686 i386 GNU/Linux
- Parameters: ro, quiet, splash
- ##### desktop ###########################
- Ubuntu 2D
- ##### lspci #############################
- 04:07.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet [10ec:8167] (rev 10)
- Subsystem: ASUSTeK Computer Inc. Device [1043:820d]
- Kernel driver in use: r8169
- ##### lsusb #############################
- Bus 001 Device 002: ID 13b1:000d Linksys WUSB54G v4 802.11g Adapter [Ralink RT2500USB]
- Bus 001 Device 003: ID 067b:2515 Prolific Technology, Inc. Flash Disk Embedded Hub
- Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- Bus 001 Device 004: ID 067b:2517 Prolific Technology, Inc. Flash Disk Mass Storage Device
- ##### PCMCIA card info ##################
- ##### rfkill ############################
- 0: phy0: Wireless LAN
- Soft blocked: no
- Hard blocked: no
- ##### lsmod #############################
- rt2500usb 31137 0
- rt2x00usb 20161 1 rt2500usb
- rt2x00lib 49566 2 rt2500usb,rt2x00usb
- mac80211 564463 2 rt2x00usb,rt2x00lib
- cfg80211 423921 2 rt2x00lib,mac80211
- ##### interfaces ########################
- auto lo
- iface lo inet loopback
- ##### ifconfig ##########################
- eth0 Link encap:Ethernet HWaddr <MAC 'eth0' [IF]>
- UP BROADCAST MULTICAST MTU:1500 Metric:1
- RX packets:12 errors:0 dropped:0 overruns:0 frame:0
- TX packets:35 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:1000
- RX bytes:2177 (2.1 KB) TX bytes:7263 (7.2 KB)
- wlan0 Link encap:Ethernet HWaddr <MAC 'wlan0' [IF]>
- inet addr:192.168.1.69 Bcast:192.168.1.255 Mask:255.255.255.0
- inet6 addr: fe80::466d:57ff:feec:823f/64 Scope:Link
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:632057 errors:0 dropped:0 overruns:0 frame:0
- TX packets:358752 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:1000
- RX bytes:884640870 (884.6 MB) TX bytes:39506002 (39.5 MB)
- ##### iwconfig ##########################
- lo no wireless extensions.
- eth0 no wireless extensions.
- wlan0 IEEE 802.11bg ESSID:"xxxxxxxxx"
- Mode:Managed Frequency:2.462 GHz Access Point: <MAC 'xxxxxxx' [AC1]>
- Bit Rate=11 Mb/s Tx-Power=20 dBm
- Retry long limit:7 RTS thr:off Fragment thr:off
- Power Management:off
- Link Quality=32/70 Signal level=-78 dBm
- Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
- Tx excessive retries:0 Invalid misc:412 Missed beacon:0
- ##### route #############################
- Kernel IP routing table
- Destination Gateway Genmask Flags Metric Ref Use Iface
- 0.0.0.0 192.168.1.254 0.0.0.0 UG 0 0 0 wlan0
- 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0
- 192.168.1.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0
- ##### resolv.conf #######################
- nameserver 127.0.0.1
- search lan
- ##### NetworkManager info ###############
- NetworkManager Tool
- State: connected (global)
- - Device: eth0 -----------------------------------------------------------------
- Type: Wired
- Driver: r8169
- State: unavailable
- Default: no
- HW Address: <MAC 'eth0' [IF]>
- Capabilities:
- Carrier Detect: yes
- Speed: 100 Mb/s
- Wired Properties
- Carrier: off
- - Device: wlan0 [xxxxxxxxxx] -----------------------------------------------------
- Type: 802.11 WiFi
- Driver: rt2500usb
- State: connected
- Default: yes
- HW Address: <MAC 'wlan0' [IF]>
- Capabilities:
- Speed: 11 Mb/s
- Wireless Properties
- WEP Encryption: yes
- WPA Encryption: yes
- WPA2 Encryption: yes
- ##### NetworkManager.state ##############
- [main]
- NetworkingEnabled=true
- WirelessEnabled=true
- WWANEnabled=true
- WimaxEnabled=true
- ##### NetworkManager.conf ###############
- [main]
- plugins=ifupdown,keyfile
- dns=dnsmasq
- [ifupdown]
- managed=false
- ##### NetworkManager profiles ###########
- [[/etc/NetworkManager/system-connections/xxxxxxxxxx]] (600 root)
- [connection] id=xxxxxxxxxx | type=802-11-wireless | autoconnect=false
- [802-11-wireless] ssid=xxxxxxxxxx | mac-address=<MAC address>
- [ipv4] method=auto
- [ipv6] method=auto
- ##### iw reg get ########################
- Region: Europe/Lisbon (based on set time zone)
- country 00:
- (2402 - 2472 @ 40), (3, 20)
- (2457 - 2482 @ 20), (3, 20), PASSIVE-SCAN, NO-IBSS
- (2474 - 2494 @ 20), (3, 20), NO-OFDM, PASSIVE-SCAN, NO-IBSS
- (5170 - 5250 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS
- (5735 - 5835 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS
- ##### iwlist channels ###################
- lo no frequency information.
- eth0 no frequency information.
- wlan0 14 channels in total; available frequencies :
- Channel 01 : 2.412 GHz
- Channel 02 : 2.417 GHz
- Channel 03 : 2.422 GHz
- Channel 04 : 2.427 GHz
- Channel 05 : 2.432 GHz
- Channel 06 : 2.437 GHz
- Channel 07 : 2.442 GHz
- Channel 08 : 2.447 GHz
- Channel 09 : 2.452 GHz
- Channel 10 : 2.457 GHz
- Channel 11 : 2.462 GHz
- Channel 12 : 2.467 GHz
- Channel 13 : 2.472 GHz
- Channel 14 : 2.484 GHz
- Current Frequency=2.462 GHz (Channel 11)
- ##### iwlist scan #######################
- Channel occupancy:
- 2 APs on Frequency:2.412 GHz (Channel 1)
- 2 APs on Frequency:2.422 GHz (Channel 3)
- 1 APs on Frequency:2.437 GHz (Channel 6)
- 3 APs on Frequency:2.442 GHz (Channel 7)
- 2 APs on Frequency:2.447 GHz (Channel 8)
- 2 APs on Frequency:2.457 GHz (Channel 10)
- 10 APs on Frequency:2.462 GHz (Channel 11)
- 1 APs on Frequency:2.472 GHz (Channel 13)
- wlan0 Scan completed :
- Cell 01 - Address: <MAC 'xxxxxxxxxx' [AC1]>
- Channel:11
- Frequency:2.462 GHz (Channel 11)
- Quality=33/70 Signal level=-77 dBm
- Encryption key:on
- ESSID:"xxxxxxxxx"
- Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
- 24 Mb/s; 36 Mb/s; 54 Mb/s
- Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
- Mode:Master
- Extra:tsf=000000189acefa8f
- Extra: Last beacon: 16ms ago
- ##### module infos ######################
- [rt2500usb]
- filename: /lib/modules/3.13.0-49-generic/kernel/drivers/net/wireless/rt2x00/rt2500usb.ko
- license: GPL
- description: Ralink RT2500 USB Wireless LAN driver.
- version: 2.3.0
- author: http://rt2x00.serialmonkey.com
- srcversion: 29F082FC7120D8EC2E32CA0
- depends: rt2x00lib,rt2x00usb
- intree: Y
- vermagic: 3.13.0-49-generic SMP mod_unload modversions 686
- parm: nohwcrypt:Disable hardware encryption. (bool)
- [rt2x00usb]
- filename: /lib/modules/3.13.0-49-generic/kernel/drivers/net/wireless/rt2x00/rt2x00usb.ko
- license: GPL
- description: rt2x00 usb library
- version: 2.3.0
- author: http://rt2x00.serialmonkey.com
- srcversion: C8AA2904FC6A58104E65BCC
- depends: rt2x00lib,mac80211
- intree: Y
- vermagic: 3.13.0-49-generic SMP mod_unload modversions 686
- [rt2x00lib]
- filename: /lib/modules/3.13.0-49-generic/kernel/drivers/net/wireless/rt2x00/rt2x00lib.ko
- license: GPL
- description: rt2x00 library
- version: 2.3.0
- author: http://rt2x00.serialmonkey.com
- srcversion: 09822BD19555F112E3902D4
- depends: mac80211,cfg80211
- intree: Y
- vermagic: 3.13.0-49-generic SMP mod_unload modversions 686
- [mac80211]
- filename: /lib/modules/3.13.0-49-generic/kernel/net/mac80211/mac80211.ko
- license: GPL
- description: IEEE 802.11 subsystem
- srcversion: 29A87AE7782ED3657631C32
- depends: cfg80211
- intree: Y
- vermagic: 3.13.0-49-generic SMP mod_unload modversions 686
- parm: max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
- parm: max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
- parm: beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
- parm: probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
- parm: ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)
- [cfg80211]
- filename: /lib/modules/3.13.0-49-generic/kernel/net/wireless/cfg80211.ko
- description: wireless configuration support
- license: GPL
- author: Johannes Berg
- srcversion: 176113E009F723E69BE9BAB
- depends:
- intree: Y
- vermagic: 3.13.0-49-generic SMP mod_unload modversions 686
- parm: ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
- parm: cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)
- ##### module parameters #################
- [rt2500usb]
- nohwcrypt: N
- [mac80211]
- beacon_loss_count: 7
- ieee80211_default_rc_algo: minstrel_ht
- max_nullfunc_tries: 2
- max_probe_tries: 5
- probe_wait_ms: 500
- [cfg80211]
- cfg80211_disable_40mhz_24ghz: N
- ieee80211_regdom: 00
- ##### /etc/modules ######################
- lp
- ##### modprobe options ##################
- [/etc/modprobe.d/blacklist-ath_pci.conf]
- blacklist ath_pci
- [/etc/modprobe.d/blacklist.conf]
- blacklist evbug
- blacklist usbmouse
- blacklist usbkbd
- blacklist eepro100
- blacklist de4x5
- blacklist eth1394
- blacklist snd_intel8x0m
- blacklist snd_aw2
- blacklist i2c_i801
- blacklist prism54
- blacklist bcm43xx
- blacklist garmin_gps
- blacklist asus_acpi
- blacklist snd_pcsp
- blacklist pcspkr
- blacklist amd76x_edac
- [/etc/modprobe.d/blacklist-rare-network.conf]
- alias net-pf-3 off
- alias net-pf-6 off
- alias net-pf-9 off
- alias net-pf-11 off
- alias net-pf-12 off
- alias net-pf-19 off
- alias net-pf-21 off
- alias net-pf-36 off
- ##### rc.local ##########################
- iwconfig wlan0 power off
- iwconfig wlan0 rate 11M
- exit 0
- ##### pm-utils ##########################
- ##### udev rules ########################
- [/etc/udev/rules.d/70-persistent-net.rules]
- # PCI device 0x10ec:/sys/devices/pci0000:00/0000:00:13.1/0000:04:07.0 (r8169)
- SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC 'eth0' [IF]>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
- # USB device 0x13b1:0x000d (usb)
- SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC address>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0"
- ##### dmesg #############################
- [28333.956045] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
- [28334.000039] ieee80211 phy0: rt2x00usb_watchdog_tx_dma: Warning - TX queue 0 DMA timed out, invoke forced forced reset (repeated 2 times)
- [28335.129897] wlan0: authenticate with <MAC 'xxxxxxxxxx' [AC1]>
- [28335.167546] wlan0: send auth to <MAC 'xxxxxxxxxx' [AC1]> (try 1/3)
- [28335.368031] wlan0: send auth to <MAC 'xxxxxxxxxx' [AC1]> (try 2/3)
- [28335.572026] wlan0: send auth to <MAC 'xxxxxxxxxx' [AC1]> (try 3/3)
- [28335.776019] wlan0: authentication with <MAC 'xxxxxxxxxx' [AC1]> timed out
- [28335.948043] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
- [28335.988110] ieee80211 phy0: rt2x00usb_watchdog_tx_dma: Warning - TX queue 0 DMA timed out, invoke forced forced reset (repeated 2 times)
- [28337.756320] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
- [28338.000046] ieee80211 phy0: rt2x00usb_watchdog_tx_dma: Warning - TX queue 0 DMA timed out, invoke forced forced reset
- [28340.167983] wlan0: deauthenticating from <MAC 'xxxxxxxxxx' [AC1]> by local choice (reason=3)
- [28342.988052] ieee80211 phy0: rt2x00usb_watchdog_tx_dma: Warning - TX queue 0 DMA timed out, invoke forced forced reset
- [28343.880042] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
- [28343.988156] ieee80211 phy0: rt2x00usb_watchdog_tx_dma: Warning - TX queue 0 DMA timed out, invoke forced forced reset (repeated 2 times)
- [28349.234557] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [28349.412039] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
- [28349.669427] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready (repeated 2 times)
- [28413.577438] wlan0: authenticate with <MAC 'xxxxxxxxxx' [AC1]>
- [28413.613289] wlan0: send auth to <MAC 'xxxxxxxxxx' [AC1]> (try 1/3)
- [28413.619137] wlan0: authenticated
- [28413.622785] rt2500usb 1-2:1.0 wlan0: disabling HT/VHT due to WEP/TKIP use
- [28413.624439] wlan0: associate with <MAC 'xxxxxxxxxx' [AC1]> (try 1/3)
- [28413.828054] wlan0: associate with <MAC 'xxxxxxxxxx' [AC1]> (try 2/3)
- [28413.829805] wlan0: RX AssocResp from <MAC 'xxxxxxxxxx' [AC1]> (capab=0x411 status=0 aid=1)
- [28413.831408] wlan0: associated
- [28413.831468] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [29134.988562] ieee80211 phy0: rt2x00usb_watchdog_tx_dma: Warning - TX queue 0 DMA timed out, invoke forced forced reset
- [29897.488041] ieee80211 phy0: wlan0: No probe response from AP <MAC 'xxxxxxxxxx' [AC1]> after 500ms, disconnecting.
- [29897.668076] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush (repeated 2 times)
- [29898.000065] ieee80211 phy0: rt2x00usb_watchdog_tx_dma: Warning - TX queue 0 DMA timed out, invoke forced forced reset (repeated 4 times)
- [29913.236494] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready (repeated 3 times)
- [30264.293283] wlan0: authenticate with <MAC 'xxxxxxxxxx' [AC1]>
- [30264.324322] wlan0: send auth to <MAC 'xxxxxxxxxx' [AC1]> (try 1/3)
- [30264.332448] wlan0: authenticated
- [30264.335243] rt2500usb 1-2:1.0 wlan0: disabling HT/VHT due to WEP/TKIP use
- [30264.336284] wlan0: associate with <MAC 'xxxxxxxxxx' [AC1]> (try 1/3)
- [30264.337985] wlan0: RX AssocResp from <MAC 'xxxxxxxxxx' [AC1]> (capab=0x411 status=0 aid=1)
- [30264.339584] wlan0: associated
- [30264.339633] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [30638.000594] ieee80211 phy0: rt2x00usb_watchdog_tx_dma: Warning - TX queue 0 DMA timed out, invoke forced forced reset (repeated 2 times)
- [30639.516057] ieee80211 phy0: wlan0: No probe response from AP <MAC 'xxxxxxxxxx' [AC1]> after 500ms, disconnecting.
- [30639.700049] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush (repeated 2 times)
- [30639.988042] ieee80211 phy0: rt2x00usb_watchdog_tx_dma: Warning - TX queue 0 DMA timed out, invoke forced forced reset (repeated 2 times)
- [30641.129577] wlan0: authenticate with <MAC 'xxxxxxxxxx' [AC1]>
- [30641.165207] wlan0: send auth to <MAC 'xxxxxxxxxx' [AC1]> (try 1/3)
- [30641.368038] wlan0: send auth to <MAC 'xxxxxxxxxx' [AC1]> (try 2/3)
- [30641.572077] wlan0: send auth to <MAC 'xxxxxxxxxx' [AC1]> (try 3/3)
- [30641.776049] wlan0: authentication with <MAC 'xxxxxxxxxx' [AC1]> timed out
- [30641.952033] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
- [30641.988044] ieee80211 phy0: rt2x00usb_watchdog_tx_dma: Warning - TX queue 0 DMA timed out, invoke forced forced reset (repeated 2 times)
- [30643.756031] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
- [30643.988058] ieee80211 phy0: rt2x00usb_watchdog_tx_dma: Warning - TX queue 0 DMA timed out, invoke forced forced reset
- [30646.167979] wlan0: deauthenticating from <MAC 'xxxxxxxxxx' [AC1]> by local choice (reason=3)
- [30649.010546] ieee80211 phy0: rt2x00usb_watchdog_tx_dma: Warning - TX queue 0 DMA timed out, invoke forced forced reset
- [30649.872031] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
- [30649.988046] ieee80211 phy0: rt2x00usb_watchdog_tx_dma: Warning - TX queue 0 DMA timed out, invoke forced forced reset (repeated 2 times)
- [30655.241911] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [30655.420044] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
- [30655.693247] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready (repeated 2 times)
- [30972.593698] wlan0: authenticate with <MAC 'xxxxxxxxxx' [AC1]>
- [30972.630514] wlan0: send auth to <MAC 'xxxxxxxxxx' [AC1]> (try 1/3)
- [30972.635037] wlan0: authenticated
- [30972.635985] rt2500usb 1-2:1.0 wlan0: disabling HT/VHT due to WEP/TKIP use
- [30972.636251] wlan0: associate with <MAC 'xxxxxxxxxx' [AC1]> (try 1/3)
- [30972.638659] wlan0: RX AssocResp from <MAC 'xxxxxxxxxx' [AC1]> (capab=0x411 status=0 aid=1)
- [30972.641328] wlan0: associated
- [30972.641376] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- ########## wireless info END ############
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement