Log

Texas Instruments X-Loader 1.5.0 (Jun 14 2011 - 22:04:07)
Beagle xM
Reading boot sector
Loading u-boot.bin from mmc


U-Boot 2011.03-rc1-00000-g9a3cc57-dirty (Apr 01 2011 - 17:41:42)

OMAP3630/3730-GP ES2.1, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
OMAP3 Beagle board + LPDDR/NAND
I2C:   ready
DRAM:  512 MiB
NAND:  0 MiB
MMC:   OMAP SD/MMC: 0
*** Warning - readenv() failed, using default environment

In:    serial
Out:   serial
Err:   serial
Beagle xM Rev C
No EEPROM on expansion board
Die ID #54ee00029ff80000016830c40500c007
Hit any key to stop autoboot:  0
The user button is currently NOT pressed.
SD/MMC found on device 0
reading uEnv.txt

267 bytes read
Loaded environment from uEnv.txt
Importing environment from mmc ...
Running uenvcmd ...
reading uImage

3203088 bytes read
reading uInitrd

** Unable to read "uInitrd" from mmc 0:1 **
## Booting kernel from Legacy Image at 80000000 ...
   Image Name:   Angstrom/2.6.32/beagleboard
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3203024 Bytes = 3.1 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
Wrong Ramdisk Image Format
Ramdisk image is corrupt or invalid
Loading file "/boot/uImage" from mmc device 0:2 (xxa2)
3203088 bytes read
Booting from mmc ...
## Booting kernel from Legacy Image at 80200000 ...
   Image Name:   Angstrom/2.6.32/beagleboard
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3203024 Bytes = 3.1 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux.............................................................
[    0.000000] Linux version 2.6.32 (koen@dominion) (gcc version 4.3.3 (GCC) ) 1
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction ce
[    0.000000] Machine: OMAP3 Beagle Board
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] OMAP3630/DM3730 ES1.0 (l2cache iva sgx neon isp 192mhz_clk )
[    0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
[    0.000000] Reserving 12582912 bytes SDRAM for VRAM
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pa8
[    0.000000] Kernel command line: console=ttyS2,115200n8 mpurate=auto buddy=nt
[    0.000000] Beagle expansionboard: none
[    0.000000] Beagle cameraboard: lbcm3m1
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 256MB 256MB = 512MB total
[    0.000000] Memory: 500352KB available (5900K code, 673K data, 204K init, 0K)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:402
[    0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
[    0.000000] Reprogramming SDRC clock to 332000000 Hz
[    0.000000] GPMC revision 5.0
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrups
[    0.000000] Total of 96 interrupts on 1 active controller
[    0.000000] OMAP GPIO hardware version 2.5
[    0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
[    0.000000] Console: colour dummy device 80x30
[    0.000000] Calibrating delay loop... 488.41 BogoMIPS (lpj=1908736)
[    0.000000] Mount-cache hash table entries: 512
[    0.000000] CPU: Testing write buffer coherency: ok
[    0.000000] tmpfs: No value for mount option 'mode'
[    0.000000] devtmpfs: initialized
[    0.000000] regulator: core version 0.5
[    0.000000] NET: Registered protocol family 16
[    0.000000] OMAP3 Beagle Rev: xM C
[    0.000000] Beagle cameraboard: registering i2c2 bus for lbcm3m1
[    0.000000] Found NAND on CS0
[    0.000000] Registering NAND on CS0
[    0.000000] Unable to get DVI reset GPIO
[    0.000000] omap_init_mbox: platform not supported
[   10.332672] OMAP DMA hardware revision 5.0
[   10.338958] bio: create slab <bio-0> at 0
[   10.340209] SCSI subsystem initialized
[   10.341552] usbcore: registered new interface driver usbfs
[   10.341705] usbcore: registered new interface driver hub
[   10.341857] usbcore: registered new device driver usb
[   10.342224] i2c_omap i2c_omap.1: bus 1 rev4.0 at 2600 kHz
[   10.344848] twl4030: PIH (irq 7) chaining IRQs 368..375
[   10.344879] twl4030: power (irq 373) chaining IRQs 376..383
[   10.345153] twl4030: gpio (irq 368) chaining IRQs 384..401
[   10.346832] regulator: VUSB1V5: 1500 mV normal standby
[   10.347045] regulator: VUSB1V8: 1800 mV normal standby
[   10.347290] regulator: VUSB3V1: 3100 mV normal standby
[   10.348541] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[   10.348907] regulator: VMMC1: 1850 <--> 3150 mV normal standby
[   10.349182] regulator: VDAC: 1800 mV normal standby
[   10.349395] regulator: VPLL2: 1800 mV normal standby
[   10.349639] regulator: VSIM: 1800 <--> 3000 mV normal standby
[   10.349945] regulator: VAUX3: 1800 mV normal standby
[   10.350280] regulator: VAUX4: 1800 mV normal standby
[   10.360229] i2c_omap i2c_omap.2: bus 2 rev4.0 at 400 kHz
[   10.372924] i2c_omap i2c_omap.3: bus 3 rev4.0 at 100 kHz
[   10.374084] Switching to clocksource 32k_counter
[   10.383178] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
[   10.386810] musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
[   10.386810] musb_hdrc musb_hdrc: MUSB HDRC host driver
[   10.386932] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number1
[   10.387084] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   10.387084] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber1
[   10.387115] usb usb1: Product: MUSB HDRC host driver
[   10.387115] usb usb1: Manufacturer: Linux 2.6.32 musb-hcd
[   10.387145] usb usb1: SerialNumber: musb_hdrc
[   10.387756] hub 1-0:1.0: USB hub found
[   10.387786] hub 1-0:1.0: 1 port detected
[   10.388824] NET: Registered protocol family 2
[   10.389007] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[   10.389556] TCP established hash table entries: 16384 (order: 5, 131072 byte)
[   10.390014] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[   10.390228] TCP: Hash tables configured (established 16384 bind 16384)
[   10.390258] TCP reno registered
[   10.390258] UDP hash table entries: 256 (order: 0, 4096 bytes)
[   10.390289] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[   10.390533] NET: Registered protocol family 1
[   10.390960] RPC: Registered udp transport module.
[   10.390991] RPC: Registered tcp transport module.
[   10.390991] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   10.391845] omap-iommu omap-iommu.0: isp registered
[   10.393524] VFS: Disk quotas dquot_6.5.2
[   10.393615] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   10.394683] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   10.395477] JFFS2 version 2.2. (NAND) (SUMMARY)  �© 2001-2006 Red Hat, Inc.
[   10.396301] msgmni has been set to 977
[   10.400054] alg: No test for stdrng (krng)
[   10.400329] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
[   10.400360] io scheduler noop registered
[   10.400360] io scheduler deadline registered
[   10.400512] io scheduler cfq registered (default)
[   10.460235] OMAP DSS rev 2.0
[   10.460296] OMAP DISPC rev 3.0
[   10.460357] OMAP VENC rev 2
[   10.460571] OMAP DSI rev 1.0
[   10.797210] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[   10.814697] serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
[   10.831542] serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
[   10.848388] serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654
[   11.414642] console [ttyS2] enabled
[   11.424865] brd: module loaded
[   11.431213] loop: module loaded
[   11.435577] omap2-nand driver initializing
[   11.440002] No NAND device found!!!
[   11.443664] No NAND device found!!!
[   11.448181] usbcore: registered new interface driver catc
[   11.453674] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
[   11.459716] usbcore: registered new interface driver kaweth
[   11.465362] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet dr
[   11.472961] usbcore: registered new interface driver pegasus
[   11.478698] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
[   11.485717] usbcore: registered new interface driver rtl8150
[   11.491485] usbcore: registered new interface driver asix
[   11.496978] usbcore: registered new interface driver cdc_ether
[   11.502960] usbcore: registered new interface driver dm9601
[   11.508666] usbcore: registered new interface driver smsc95xx
[   11.514526] usbcore: registered new interface driver gl620a
[   11.520233] usbcore: registered new interface driver net1080
[   11.526031] usbcore: registered new interface driver plusb
[   11.531646] usbcore: registered new interface driver rndis_host
[   11.537689] usbcore: registered new interface driver cdc_subset
[   11.543731] usbcore: registered new interface driver zaurus
[   11.549438] usbcore: registered new interface driver MOSCHIP usb-ethernet drr
[   11.557495] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   11.564300] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[   11.570312] ehci-omap ehci-omap.0: new USB bus registered, assigned bus numb2
[   11.577911] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[   11.592956] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[   11.598846] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[   11.605712] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber1
[   11.613006] usb usb2: Product: OMAP-EHCI Host Controller
[   11.618347] usb usb2: Manufacturer: Linux 2.6.32 ehci_hcd
[   11.623809] usb usb2: SerialNumber: ehci-omap.0
[   11.629028] hub 2-0:1.0: USB hub found
[   11.632873] hub 2-0:1.0: 3 ports detected
[   11.663513] Initializing USB Mass Storage driver...
[   11.668579] usbcore: registered new interface driver usb-storage
[   11.674652] USB Mass Storage support registered.
[   11.679656] mice: PS/2 mouse device common for all mice
[   11.685302] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[   11.693115] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-1/11
[   11.703826] i2c /dev entries driver
[   11.707916] Linux video capture interface: v2.00
[   11.712860] omap-iommu omap-iommu.0: isp: version 1.1
[   11.719543] vpfe_init
[   11.722381] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[   11.729156] cpuidle: using governor ladder
[   11.733276] cpuidle: using governor menu
[   11.843322] mmci-omap-hs mmci-omap-hs.1: err -16 configuring card detect
[   11.850341] Registered led device: beagleboard::usr0
[   11.855499] Registered led device: beagleboard::usr1
[   11.861999] Registered led device: beagleboard::pmu_stat
[   11.869049] usbcore: registered new interface driver usbhid
[   11.874725] usbhid: USB HID core driver
[   11.878753] Advanced Linux Sound Architecture Driver Version 1.0.21.
[   11.885650] usbcore: registered new interface driver snd-usb-audio
[   11.964874] No device for DAI omap-mcbsp-dai-0
[   11.969390] No device for DAI omap-mcbsp-dai-1
[   11.973876] No device for DAI omap-mcbsp-dai-2
[   11.978363] No device for DAI omap-mcbsp-dai-3
[   11.982849] No device for DAI omap-mcbsp-dai-4
[   11.987335] OMAP3 Beagle SoC init
[   11.991516] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
[   12.002990] ALSA device list:
[   12.005981]   #0: omap3beagle (twl4030)
[   12.009979] oprofile: using arm/armv7
[   12.013885] TCP cubic registered
[   12.017181] NET: Registered protocol family 17
[   12.021697] NET: Registered protocol family 15
[   12.026275] lib80211: common routines for IEEE802.11 drivers
[   12.032012] ThumbEE CPU extension supported.
[   12.036315] Power Management for TI OMAP3.
[   12.041595] SmartReflex driver initialized
[   12.045867] omap3beaglelmb: Driver registration complete
[   12.059631] VFP support v0.3: implementor 41 architecture 3 part 30 variant 3
[   12.067871] registered taskstats version 1
[   12.072723] fbcvt: 640x480@60: CVT Name - .307M3-R
[   12.086517] Console: switching to colour frame buffer device 80x30
[   12.098266] regulator_init_complete: incomplete constraints, leaving VAUX4 on
[   12.106475] regulator_init_complete: incomplete constraints, leaving VAUX3 on
[   12.115631] regulator_init_complete: incomplete constraints, leaving VDAC on
[   12.123504] omap_vout omap_vout: probed for an unknown device
[   12.129699] Waiting for root device /dev/mmcblk0p2...
[   12.272796] mmc0: host does not support reading read-only switch. assuming w.
[   12.280975] mmc0: new high speed SDHC card at address e624
[   12.286773] mmcblk0: mmc0:e624 SU04G 3.69 GiB
[   12.291534]  mmcblk0: p1 p2
[   13.944000] kjournald starting.  Commit interval 5 seconds
[   13.951080] EXT3-fs (mmcblk0p2): using internal journal
[   13.956359] EXT3-fs (mmcblk0p2): recovery complete
[   13.963714] EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
[   13.970886] VFS: Mounted root (ext3 filesystem) on device 179:2.
[   13.981231] devtmpfs: mounted
[   13.984313] Freeing init memory: 204K
INIT: version 2.86 booting
Please wait: booting...
Starting udev
[   14.706634] udev: starting version 151
Remounting root file system...
Caching udev devnodes
Populating dev cache
[   18.050170] Bluetooth: Core ver 2.15
[   18.054748] NET: Registered protocol family 31
[   18.059204] Bluetooth: HCI device and connection manager initialized
[   18.065643] Bluetooth: HCI socket layer initialized
[   18.085937] Bluetooth: L2CAP ver 2.14
[   18.089630] Bluetooth: L2CAP socket layer initialized
[   18.109191] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   18.219970] NET: Registered protocol family 10
[   18.278747] NET: Registered protocol family 23
[   18.298339] IrCOMM protocol (Dag Brattli)
[   18.394653] Bluetooth: RFCOMM TTY layer initialized
[   18.399688] Bluetooth: RFCOMM socket layer initialized
[   18.404876] Bluetooth: RFCOMM ver 1.11
ALSA: Restoring mixer settings...
Cleaning: /etc/network/run/ifstate.
Configuring network interfaces... eth0: unknown interface: No such device
eth0: unknown interface: No such device
eth0      No such device

Internet Systems Consortium DHCP Client 4.1.1-P1
Copyright 2004-2010 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

can't create /var/lib/dhcp/dhclient.eth0.leases: No such file or directory
SIOCSIFADDR: No such device
eth0: unknown interface: No such device
eth0: unknown interface: No such device
Bind socket to interface: No such device

If you did not get this software from ftp.isc.org, please
get the latest from ftp.isc.org and install that before
requesting help.

If you did get this software from ftp.isc.org and have not
yet read the README, please read it before requesting help.
If you intend to request help from the dhcp-server@isc.org
mailing list, please read the section on the README about
submitting bug reports and requests for help.

Please do not under any circumstances send requests for
help directly to the authors of this software - please
send them to the appropriate mailing list as described in
the README file.

exiting.
Failed to bring up eth0.
usb0: unknown interface: No such device
usb0: unknown interface: No such device
usb0      No such device

Internet Systems Consortium DHCP Client 4.1.1-P1
Copyright 2004-2010 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

can't create /var/lib/dhcp/dhclient.usb0.leases: No such file or directory
SIOCSIFADDR: No such device
usb0: unknown interface: No such device
usb0: unknown interface: No such device
Bind socket to interface: No such device

If you did not get this software from ftp.isc.org, please
get the latest from ftp.isc.org and install that before
requesting help.

If you did get this software from ftp.isc.org and have not
yet read the README, please read it before requesting help.
If you intend to request help from the dhcp-server@isc.org
mailing list, please read the section on the README about
submitting bug reports and requests for help.

Please do not under any circumstances send requests for
help directly to the authors of this software - please
send them to the appropriate mailing list as described in
the README file.

exiting.
Failed to bring up usb0.
done.
Starting portmap daemon: portmap.
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
hwclock: can't open '/dev/misc/rtc': No such file or directory
Wed Dec 14 16:11:00 GMT 2011
hwclock: can't open '/dev/misc/rtc': No such file or directory
INIT: Entering runlevel: 5
Starting system message bus: dbus.
Starting Hardware abstraction layer hald
Configuring leds:
  beagleboard::pmu_stat: none
  beagleboard::usr0: heartbeat
  beagleboard::usr1: mmc0
Starting Dropbear SSH server: dropbear.
Starting advanced power management daemon: No APM support in kernel
(failed.)
Starting Distributed Compiler Daemon: distcc.
Starting Samba: smbd nmbd.
Starting syslog-ng:.
[ ok ]rting Avahi mDNS/DNS-SD Daemon: avahi-daemon
Starting Network connection manager daemon: NetworkManager.
cups: started scheduler.
Starting GPE display manager: gpe-dm

.-------.
|       |                  .-.
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyS2

Angstrom 2010.7-test-20110220 beagleboard ttyS2

beagleboard login: root