KS-3 RomAnOCrY

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-32-pve (root@lola) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Thu Aug 21 08:50:19 CEST 2014
Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-32-pve root=/dev/sda2 ro quiet
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
 BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bf790000 (usable)
 BIOS-e820: 00000000bf79e000 - 00000000bf7a0000 (reserved)
 BIOS-e820: 00000000bf7a0000 - 00000000bf7ae000 (ACPI data)
 BIOS-e820: 00000000bf7ae000 - 00000000bf7d0000 (ACPI NVS)
 BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved)
 BIOS-e820: 00000000bf7ed000 - 00000000c0000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fed20000 - 00000000fed40000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000440000000 (usable)
DMI present.
SMBIOS version 2.6 @ 0xFAFA0
DMI: Supermicro X8SIL/X8SIL, BIOS 1.2a       06/27/2012
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x440000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CBFFF write-protect
  CC000-DFFFF uncachable
  E0000-E3FFF write-protect
  E4000-E7FFF write-through
  E8000-EBFFF write-protect
  EC000-EFFFF write-through
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask C00000000 write-back
  1 base 400000000 mask FC0000000 write-back
  2 base 0C0000000 mask FC0000000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 1GB, type WB
reg 2, base: 3GB, range: 1GB, type UC
total RAM covered: 16384M
Found optimal setting for mtrr clean up
 gran_size: 64K         chunk_size: 64K         num_reg: 5      lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 4GB, range: 4GB, type WB
reg 3, base: 8GB, range: 8GB, type WB
reg 4, base: 16GB, range: 1GB, type WB
e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf790 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bf790000
 0000000000 - 00bf600000 page 2M
 00bf600000 - 00bf790000 page 4k
kernel direct mapping tables up to bf790000 @ 10000-15000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-0000000440000000
 0100000000 - 0440000000 page 2M
kernel direct mapping tables up to 440000000 @ 13000-21000
RAMDISK: 35f20000 - 36f87b75
ACPI: RSDP 00000000000fa400 00024 (v02 ACPIAM)
ACPI: XSDT 00000000bf7a0100 00084 (v01 SMCI            20120627 MSFT 00000097)
ACPI: FACP 00000000bf7a0290 000F4 (v04 062712 FACP1401 20120627 MSFT 00000097)
ACPI: DSDT 00000000bf7a05f0 06CBD (v02  10605 10605000 00000000 INTL 20051117)
ACPI: FACS 00000000bf7ae000 00040
ACPI: APIC 00000000bf7a0390 00092 (v02 062712 APIC1401 20120627 MSFT 00000097)
ACPI: MCFG 00000000bf7a0430 0003C (v01 062712 OEMMCFG  20120627 MSFT 00000097)
ACPI: OEMB 00000000bf7ae040 00073 (v01 062712 OEMB1401 20120627 MSFT 00000097)
ACPI: HPET 00000000bf7aa5f0 00038 (v01 062712 OEMHPET  20120627 MSFT 00000097)
ACPI: GSCI 00000000bf7ae0c0 02024 (v01 062712 GMCHSCI  20120627 MSFT 00000097)
ACPI: DMAR 00000000bf7b00f0 00080 (v01    AMI  OEMDMAR 00000001 MSFT 00000097)
ACPI: SSDT 00000000bf7b1780 00363 (v01 DpgPmm    CpuPm 00000012 INTL 20051117)
ACPI: EINJ 00000000bf7aa630 00130 (v01  AMIER AMI_EINJ 20120627 MSFT 00000097)
ACPI: BERT 00000000bf7aa7c0 00030 (v01  AMIER AMI_BERT 20120627 MSFT 00000097)
ACPI: ERST 00000000bf7aa7f0 001B0 (v01  AMIER AMI_ERST 20120627 MSFT 00000097)
ACPI: HEST 00000000bf7aa9a0 000A8 (v01  AMIER ABC_HEST 20120627 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
No NUMA configuration found
Faking a node at 0000000000000000-0000000440000000
Bootmem setup node 0 0000000000000000-0000000440000000
  NODE_DATA [0000000000020000 - 0000000000060fff]
  bootmap [0000000000100000 -  0000000000187fff] pages 88
(8 early reservations) ==> bootmem [0000000000 - 0440000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0001000000 - 000243a5a4]    TEXT DATA BSS ==> [0001000000 - 000243a5a4]
  #3 [0035f20000 - 0036f87b75]          RAMDISK ==> [0035f20000 - 0036f87b75]
  #4 [000009d800 - 0000100000]    BIOS reserved ==> [000009d800 - 0000100000]
  #5 [000243b000 - 000243b277]              BRK ==> [000243b000 - 000243b277]
  #6 [0000010000 - 0000013000]          PGTABLE ==> [0000010000 - 0000013000]
  #7 [0000013000 - 0000020000]          PGTABLE ==> [0000013000 - 0000020000]
found SMP MP-table at [ffff8800000ff780] ff780
 [ffffea0000000000-ffffea000e7fffff] PMD -> [ffff880028600000-ffff880035dfffff] on node 0
 [ffffea000e800000-ffffea0010ffffff] PMD -> [ffff880037000000-ffff8800397fffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00440000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000010 -> 0x0000009d
    0: 0x00000100 -> 0x000bf790
    0: 0x00100000 -> 0x00440000
On node 0 totalpages: 4192029
  DMA zone: 64 pages used for memmap
  DMA zone: 117 pages reserved
  DMA zone: 3800 pages, LIFO batch:0
  DMA32 zone: 16320 pages used for memmap
  DMA32 zone: 763856 pages, LIFO batch:31
  Normal zone: 53248 pages used for memmap
  Normal zone: 3354624 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 7, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bf790000 - 00000000bf79e000
PM: Registered nosave memory: 00000000bf79e000 - 00000000bf7a0000
PM: Registered nosave memory: 00000000bf7a0000 - 00000000bf7ae000
PM: Registered nosave memory: 00000000bf7ae000 - 00000000bf7d0000
PM: Registered nosave memory: 00000000bf7d0000 - 00000000bf7e0000
PM: Registered nosave memory: 00000000bf7e0000 - 00000000bf7ed000
PM: Registered nosave memory: 00000000bf7ed000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fed40000
PM: Registered nosave memory: 00000000fed40000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 39 pages/cpu @ffff880028200000 s129112 r8192 d22440 u262144
pcpu-alloc: s129112 r8192 d22440 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4122280
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-32-pve root=/dev/sda2 ro quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
------------[ cut here ]------------
WARNING: at drivers/pci/dmar.c:588 warn_invalid_dmar+0x7a/0x90() (Not tainted)
Hardware name: X8SIL
[Firmware Warn]: Your BIOS is broken; DMAR reported at address fed90000 returns all ones!
BIOS vendor: American Megatrends Inc.; Ver: 1.2a      ; Product Version: 0123456789
Modules linked in:
Pid: 0, comm: swapper veid: 0 Not tainted 2.6.32-32-pve #1
Call Trace:
 [<ffffffff810733b7>] ? warn_slowpath_common+0x87/0xe0
 [<ffffffff8107346f>] ? warn_slowpath_fmt_taint+0x3f/0x50
 [<ffffffff81c4fd98>] ? __early_set_fixmap+0x92/0x96
 [<ffffffff8103db8d>] ? native_set_pte_at+0xd/0x40
 [<ffffffff812bea6a>] ? warn_invalid_dmar+0x7a/0x90
 [<ffffffff81c501ba>] ? early_iounmap+0xe0/0x142
 [<ffffffff81c64583>] ? check_zero_address+0xc4/0xff
 [<ffffffff81566357>] ? _etext+0x0/0x1
 [<ffffffff81c645d0>] ? detect_intel_iommu+0x12/0x93
 [<ffffffff81c3cf05>] ? pci_iommu_alloc+0x5b/0x69
 [<ffffffff81c783c0>] ? boot_command_line+0x0/0x800
 [<ffffffff81c4fa79>] ? mem_init+0x1b/0x10c
 [<ffffffff81c783c0>] ? boot_command_line+0x0/0x800
 [<ffffffff81c34af8>] ? start_kernel+0x216/0x40b
 [<ffffffff81c3433b>] ? x86_64_start_reservations+0x126/0x12a
 [<ffffffff81c3444d>] ? x86_64_start_kernel+0x10e/0x11d
---[ end trace a7919e7f17c0a725 ]---
Disabling lock debugging due to kernel taint
Tainting kernel with flag 0xb
Pid: 0, comm: swapper veid: 0 Not tainted 2.6.32-32-pve #1
Call Trace:
 [<ffffffff81073269>] ? add_taint+0x69/0x70
 [<ffffffff810733d9>] ? warn_slowpath_common+0xa9/0xe0
 [<ffffffff8107346f>] ? warn_slowpath_fmt_taint+0x3f/0x50
 [<ffffffff81c4fd98>] ? __early_set_fixmap+0x92/0x96
 [<ffffffff8103db8d>] ? native_set_pte_at+0xd/0x40
 [<ffffffff812bea6a>] ? warn_invalid_dmar+0x7a/0x90
 [<ffffffff81c501ba>] ? early_iounmap+0xe0/0x142
 [<ffffffff81c64583>] ? check_zero_address+0xc4/0xff
 [<ffffffff81566357>] ? _etext+0x0/0x1
 [<ffffffff81c645d0>] ? detect_intel_iommu+0x12/0x93
 [<ffffffff81c3cf05>] ? pci_iommu_alloc+0x5b/0x69
 [<ffffffff81c783c0>] ? boot_command_line+0x0/0x800
 [<ffffffff81c4fa79>] ? mem_init+0x1b/0x10c
 [<ffffffff81c783c0>] ? boot_command_line+0x0/0x800
 [<ffffffff81c34af8>] ? start_kernel+0x216/0x40b
 [<ffffffff81c3433b>] ? x86_64_start_reservations+0x126/0x12a
 [<ffffffff81c3444d>] ? x86_64_start_kernel+0x10e/0x11d
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
PRAM: banned regions:
   0: [00000000 - 0000243b] 9276 pages
   1: [00020000 - 00028404] 33797 pages
   2: [00028600 - 00035dff] 55296 pages
   3: [00035f20 - 00036f87] 4200 pages
   4: [00037000 - 000397ff] 10240 pages
Total banned: 112809 pages in 5 regions
Memory: 16400548k/17825792k available (5528k kernel code, 1057676k absent, 367568k reserved, 6831k data, 1332k init)
PRAM: selected csum mode: crc32c
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:472
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2666.601 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.20 BogoMIPS (lpj=2666601)
pid_max: default: 1048576 minimum: 301
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Dcache time values: 1001 -> 9 , 4294667304
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 22332 entries in 88 pages
dmar: Host address width 36
dmar: DRHD base: 0x000000fed90000 flags: 0x1
------------[ cut here ]------------
WARNING: at drivers/pci/dmar.c:588 warn_invalid_dmar+0x7a/0x90() (Tainted: G          I---------------   )
Hardware name: X8SIL
[Firmware Warn]: Your BIOS is broken; DMAR reported at address fed90000 returns all ones!
BIOS vendor: American Megatrends Inc.; Ver: 1.2a      ; Product Version: 0123456789
Modules linked in:
Pid: 1, comm: swapper veid: 0 Tainted: G          I---------------    2.6.32-32-pve #1
Call Trace:
 [<ffffffff810733b7>] ? warn_slowpath_common+0x87/0xe0
 [<ffffffff8107346f>] ? warn_slowpath_fmt_taint+0x3f/0x50
 [<ffffffff8104814f>] ? __ioremap_caller+0x25f/0x360
 [<ffffffff812beedc>] ? alloc_iommu+0xac/0x350
 [<ffffffff812bea6a>] ? warn_invalid_dmar+0x7a/0x90
 [<ffffffff812bf0e7>] ? alloc_iommu+0x2b7/0x350
 [<ffffffff81c647ec>] ? dmar_table_init+0x19b/0x33e
 [<ffffffff81c458b4>] ? enable_IR_x2apic+0x10/0x1b1
 [<ffffffff81c45d42>] ? default_setup_apic_routing+0xe/0x73
 [<ffffffff81c43699>] ? native_smp_prepare_cpus+0x35e/0x383
 [<ffffffff81c34d82>] ? kernel_init+0x95/0x28c
 [<ffffffff8100c3ca>] ? child_rip+0xa/0x20
 [<ffffffff81c34ced>] ? kernel_init+0x0/0x28c
 [<ffffffff8100c3c0>] ? child_rip+0x0/0x20
---[ end trace a7919e7f17c0a726 ]---
Tainting kernel with flag 0xb
Pid: 1, comm: swapper veid: 0 Tainted: G          I---------------    2.6.32-32-pve #1
Call Trace:
 [<ffffffff81073269>] ? add_taint+0x69/0x70
 [<ffffffff810733d9>] ? warn_slowpath_common+0xa9/0xe0
 [<ffffffff8107346f>] ? warn_slowpath_fmt_taint+0x3f/0x50
 [<ffffffff8104814f>] ? __ioremap_caller+0x25f/0x360
 [<ffffffff812beedc>] ? alloc_iommu+0xac/0x350
 [<ffffffff812bea6a>] ? warn_invalid_dmar+0x7a/0x90
 [<ffffffff812bf0e7>] ? alloc_iommu+0x2b7/0x350
 [<ffffffff81c647ec>] ? dmar_table_init+0x19b/0x33e
 [<ffffffff81c458b4>] ? enable_IR_x2apic+0x10/0x1b1
 [<ffffffff81c45d42>] ? default_setup_apic_routing+0xe/0x73
 [<ffffffff81c43699>] ? native_smp_prepare_cpus+0x35e/0x383
 [<ffffffff81c34d82>] ? kernel_init+0x95/0x28c
 [<ffffffff8100c3ca>] ? child_rip+0xa/0x20
 [<ffffffff81c34ced>] ? kernel_init+0x0/0x28c
 [<ffffffff8100c3c0>] ? child_rip+0x0/0x20
dmar: IOMMU: failed to map dmar0
dmar: parse DMAR table failure.
APIC routing finalized to flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i5 CPU         750  @ 2.67GHz stepping 05
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
CPU erratum AAJ80 worked around
CPUID marked event: 'bus cycles' unavailable
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node   0, Processors  #1 #2 #3
Brought up 4 CPUs
Total of 4 processors activated (21332.80 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=64 bytes
sizeof(inode)=664 bytes
sizeof(dentry)=224 bytes
sizeof(ext3inode)=872 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=264 bytes
sizeof(task_struct)=2800 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at bf7ae000 (139264 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI Warning for \_SB_._OSC: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1018)
\_SB_:_OSC evaluation returned wrong type
_OSC request data:1 1f
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI Warning: Incorrect checksum in table [OEMB] - 62, should be 5F (20090903/tbutils-314)
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xfb4fc000-0xfb4fc3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io  0xc400-0xc407]
pci 0000:00:1f.2: reg 14: [io  0xcc00-0xcc03]
pci 0000:00:1f.2: reg 18: [io  0xc880-0xc887]
pci 0000:00:1f.2: reg 1c: [io  0xc800-0xc803]
pci 0000:00:1f.2: reg 20: [io  0xc480-0xc49f]
pci 0000:00:1f.2: reg 24: [mem 0xfb4fa000-0xfb4fa7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xfb4f8000-0xfb4f80ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
pci 0000:00:03.0: PCI bridge to [bus 01-01]
pci 0000:00:03.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:03.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:03.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:05.0: PCI bridge to [bus 02-02]
pci 0000:00:05.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:05.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:05.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.0: PCI bridge to [bus 03-03]
pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: reg 10: [mem 0xfb5e0000-0xfb5fffff]
pci 0000:04:00.0: reg 18: [io  0xdc00-0xdc1f]
pci 0000:04:00.0: reg 1c: [mem 0xfb5dc000-0xfb5dffff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 04-04]
pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.4:   bridge window [mem 0xfb500000-0xfb5fffff]
pci 0000:00:1c.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:05:00.0: reg 10: [mem 0xfb6e0000-0xfb6fffff]
pci 0000:05:00.0: reg 18: [io  0xec00-0xec1f]
pci 0000:05:00.0: reg 1c: [mem 0xfb6dc000-0xfb6dffff]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 05-05]
pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.5:   bridge window [mem 0xfb600000-0xfb6fffff]
pci 0000:00:1c.5:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:06:03.0: reg 10: [mem 0xfa000000-0xfaffffff pref]
pci 0000:06:03.0: reg 14: [mem 0xfb7fc000-0xfb7fffff]
pci 0000:06:03.0: reg 18: [mem 0xfb800000-0xfbffffff]
pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfb700000-0xfbffffff]
pci 0000:00:1e.0:   bridge window [mem 0xfa000000-0xfaffffff 64bit pref]
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR24._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
 pci0000:00: ACPI _OSC control (0x1c) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 14 *15)
vgaarb: device added: PCI:0000:06:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:06:03.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
  alloc irq_desc for 24 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 25 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 26 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 27 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 28 on node 0
  alloc kstat_irqs on node 0
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 24 for MSI
hpet: hpet3 irq 25 for MSI
hpet: hpet4 irq 26 for MSI
hpet: hpet5 irq 27 for MSI
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfc000000-0xfcffffff]
pnp 00:01: [mem 0xfd000000-0xfdffffff]
pnp 00:01: [mem 0xfe000000-0xfebfffff]
pnp 00:01: [mem 0xfed14000-0xfed19fff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io  0x0000-0x000f]
pnp 00:02: [io  0x0081-0x0083]
pnp 00:02: [io  0x0087]
pnp 00:02: [io  0x0089-0x008b]
pnp 00:02: [io  0x008f]
pnp 00:02: [io  0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io  0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io  0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io  0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io  0x03f8-0x03ff]
pnp 00:06: [irq 4]
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: [io  0x02f8-0x02ff]
pnp 00:07: [irq 3]
pnp 00:07: [dma 0 disabled]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:08: [io  0x164e-0x164f]
pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:09: [io  0x0a00-0x0a0f]
pnp 00:09: [io  0x0a10-0x0a1f]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [io  0x0010-0x001f]
pnp 00:0a: [io  0x0022-0x003f]
pnp 00:0a: [io  0x0044-0x004d]
pnp 00:0a: [io  0x0050-0x005f]
pnp 00:0a: [io  0x0062-0x0063]
pnp 00:0a: [io  0x0065-0x006f]
pnp 00:0a: [io  0x0072-0x007f]
pnp 00:0a: [io  0x0080]
pnp 00:0a: [io  0x0084-0x0086]
pnp 00:0a: [io  0x0088]
pnp 00:0a: [io  0x008c-0x008e]
pnp 00:0a: [io  0x0090-0x009f]
pnp 00:0a: [io  0x00a2-0x00bf]
pnp 00:0a: [io  0x00e0-0x00ef]
pnp 00:0a: [io  0x0ca2-0x0ca3]
pnp 00:0a: [io  0x0cf8-0x0cff]
pnp 00:0a: [io  0x04d0-0x04d1]
pnp 00:0a: [io  0x0800-0x087f]
pnp 00:0a: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:0a: [io  0x0500-0x057f]
pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
pnp 00:0a: [mem 0xfed40000-0xfed8ffff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0xfed00000-0xfed003ff]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:0c: [io  0x0060]
pnp 00:0c: [io  0x0064]
pnp 00:0c: [mem 0xfec00000-0xfec00fff]
pnp 00:0c: [mem 0xfee00000-0xfee00fff]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0xe0000000-0xefffffff]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: [mem 0x000c0000-0x000cffff]
pnp 00:0e: [mem 0x000e0000-0x000fffff]
pnp 00:0e: [mem 0xfed90000-0xffffffff]
pnp 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:08: [io  0x164e-0x164f] has been reserved
system 00:09: [io  0x0a00-0x0a0f] has been reserved
system 00:09: [io  0x0a10-0x0a1f] has been reserved
system 00:0a: [io  0x0ca2-0x0ca3] has been reserved
system 00:0a: [io  0x0cf8-0x0cff] could not be reserved
system 00:0a: [io  0x04d0-0x04d1] has been reserved
system 00:0a: [io  0x0800-0x087f] has been reserved
system 00:0a: [io  0x0500-0x057f] has been reserved
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0e: [mem 0xfed90000-0xffffffff] could not be reserved
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0400000-0xc05fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
pci 0000:00:03.0: PCI bridge to [bus 01-01]
pci 0000:00:03.0: PCI bridge to [bus 01-01]
pci 0000:00:03.0:   bridge window [io  disabled]
pci 0000:00:03.0:   bridge window [mem disabled]
pci 0000:00:03.0:   bridge window [mem pref disabled]
pci 0000:00:05.0: PCI bridge to [bus 02-02]
pci 0000:00:05.0: PCI bridge to [bus 02-02]
pci 0000:00:05.0:   bridge window [io  disabled]
pci 0000:00:05.0:   bridge window [mem disabled]
pci 0000:00:05.0:   bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 03-03]
pci 0000:00:1c.0: PCI bridge to [bus 03-03]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc05fffff]
pci 0000:00:1c.0:   bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 04-04]
pci 0000:00:1c.4: PCI bridge to [bus 04-04]
pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.4:   bridge window [mem 0xfb500000-0xfb5fffff]
pci 0000:00:1c.4:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 05-05]
pci 0000:00:1c.5: PCI bridge to [bus 05-05]
pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.5:   bridge window [mem 0xfb600000-0xfb6fffff]
pci 0000:00:1c.5:   bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 06-06]
pci 0000:00:1e.0: PCI bridge to [bus 06-06]
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem 0xfb700000-0xfbffffff]
pci 0000:00:1e.0:   bridge window [mem 0xfa000000-0xfaffffff 64bit pref]
  alloc irq_desc for 16 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0104 -> 0107)
  alloc irq_desc for 17 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xc0400000-0xc05fffff]
pci_bus 0000:03: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xfb500000-0xfb5fffff]
pci_bus 0000:04: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
pci_bus 0000:05: resource 1 [mem 0xfb600000-0xfb6fffff]
pci_bus 0000:05: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xfb700000-0xfbffffff]
pci_bus 0000:06: resource 2 [mem 0xfa000000-0xfaffffff 64bit pref]
pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:06: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:06: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:06: resource 9 [mem 0xf0000000-0xfed8ffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
  alloc irq_desc for 23 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:06:03.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 16798k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1419936387.459:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32065
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:03.0: setting latency timer to 64
  alloc irq_desc for 29 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:03.0: irq 29 for MSI/MSI-X
pcieport 0000:00:05.0: setting latency timer to 64
  alloc irq_desc for 30 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:05.0: irq 30 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
  alloc irq_desc for 31 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 31 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
  alloc irq_desc for 32 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.4: irq 32 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
  alloc irq_desc for 33 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.5: irq 33 for MSI/MSI-X
aer 0000:00:03.0:pcie02: service driver aer loaded
aer 0000:00:05.0:pcie02: service driver aer loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1E
intel_idle: lapic_timer_reliable_states 0x2
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: mem 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at mem address 0xca2, slave address 0x0, irq 0
ipmi_si: Could not set up I/O space
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idleACPI: SSDT 00000000bf7b0170 01130 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
ACPI: SSDT 00000000bf7b12a0 004D5 (v01  PmRef  P001Cst 00003001 INTL 20051117)
[Firmware Bug]: No valid trip found
ERST: Failed to get Error Log Address Range.
[Firmware Warn]: GHES: Poll interval is 0 for generic hardware error source: 1, disabled.
GHES: APEI firmware first mode is enabled by WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfb4fc000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-32-pve ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.6-ioctl (2013-01-15) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Bridge firewalling registered
Dcache charge unit 924
registered taskstats version 1
rtc_cmos 00:03: setting system clock to 2014-12-30 10:46:28 UTC (1419936388)
Initalizing network drop monitor service
Freeing unused kernel memory: 1332k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 596k freed
Freeing unused kernel memory: 1512k freed
<30>udevd[103]: starting version 175
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 3.1.0.2-NAPI
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
e1000e 0000:04:00.0: Disabling ASPM L0s L1
e1000e 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
e1000e 0000:04:00.0: setting latency timer to 64
e1000e 0000:04:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
  alloc irq_desc for 34 on node -1
  alloc kstat_irqs on node -1
e1000e 0000:04:00.0: irq 34 for MSI/MSI-X
  alloc irq_desc for 35 on node -1
  alloc kstat_irqs on node -1
e1000e 0000:04:00.0: irq 35 for MSI/MSI-X
  alloc irq_desc for 36 on node -1
  alloc kstat_irqs on node -1
e1000e 0000:04:00.0: irq 36 for MSI/MSI-X
ahci 0000:00:1f.2: version 3.0
  alloc irq_desc for 19 on node -1
  alloc kstat_irqs on node -1
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  alloc irq_desc for 37 on node -1
  alloc kstat_irqs on node -1
ahci 0000:00:1f.2: irq 37 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfb4fa000 port 0xfb4fa100 irq 37
ata2: SATA max UDMA/133 abar m2048@0xfb4fa000 port 0xfb4fa180 irq 37
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xfb4fa000 port 0xfb4fa300 irq 37
ata6: SATA max UDMA/133 abar m2048@0xfb4fa000 port 0xfb4fa380 irq 37
e1000e 0000:04:00.0: eth0: registered PHC clock
e1000e 0000:04:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:30:22:02
e1000e 0000:04:00.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:04:00.0: eth0: MAC: 3, PHY: 8, PBA No: 0101FF-0FF
e1000e 0000:05:00.0: Disabling ASPM L0s L1
e1000e 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
e1000e 0000:05:00.0: setting latency timer to 64
e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
  alloc irq_desc for 38 on node -1
  alloc kstat_irqs on node -1
e1000e 0000:05:00.0: irq 38 for MSI/MSI-X
  alloc irq_desc for 39 on node -1
  alloc kstat_irqs on node -1
e1000e 0000:05:00.0: irq 39 for MSI/MSI-X
  alloc irq_desc for 40 on node -1
  alloc kstat_irqs on node -1
e1000e 0000:05:00.0: irq 40 for MSI/MSI-X
e1000e 0000:05:00.0: eth1: registered PHC clock
e1000e 0000:05:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:30:22:03
e1000e 0000:05:00.0: eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:05:00.0: eth1: MAC: 3, PHY: 8, PBA No: 0101FF-0FF
usb 1-1: new high speed USB device number 2 using ehci_hcd
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: HGST HUS724020ALA640, MF6OAA70, max UDMA/133
ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      HGST HUS724020AL MF6O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 8 ports detected
 sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
Refined TSC clocksource calibration: 2666.666 MHz.
Switching to clocksource tsc
ata2: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
sd 0:0:0:0: Attached scsi generic sg0 type 0
TECH PREVIEW: btrfs may not be fully supported.
Please review provided documentation for limitations.
Tainting kernel with flag 0x1d
Pid: 346, comm: busybox veid: 0 Tainted: G          I---------------    2.6.32-32-pve #1
Call Trace:
 [<ffffffff81073269>] ? add_taint+0x69/0x70
 [<ffffffff810a8971>] ? mark_tech_preview+0x71/0xa0
 [<ffffffffa013f014>] ? init_btrfs_fs+0x14/0xb8 [btrfs]
 [<ffffffff8100204c>] ? do_one_initcall+0x3c/0x1d0
 [<ffffffff810cc276>] ? sys_init_module+0xd6/0x260
 [<ffffffff8100b182>] ? system_call_fastpath+0x16/0x1b
Btrfs loaded
EXT3-fs: barriers disabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda2): mounted filesystem with ordered data mode
<30>udevd[487]: starting version 175
ACPI: resource (null) [io  0x0828-0x082f] conflicts with ACPI region PMRG [io 0x800-0x84f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
  alloc irq_desc for 18 on node -1
  alloc kstat_irqs on node -1
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
iTCO_wdt: Found a 3400 TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
input: PC Speaker as /devices/platform/pcspkr/input/input3
Adding 1047544k swap on /dev/sda3.  Priority:-1 extents:1 across:1047544k
EXT3-fs (sda2): using internal journal
fuse init (API version 7.13)
EXT3-fs: barriers disabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (dm-0): using internal journal
EXT3-fs (dm-0): mounted filesystem with ordered data mode
NET: Registered protocol family 10
Loading kernel module for a network device with CAP_SYS_MODULE (deprecated).  Use CAP_NET_ADMIN and alias netdev-dummy0 instead
device dummy0 entered promiscuous mode
vmbr1: port 1(dummy0) entering forwarding state
device eth0 entered promiscuous mode
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
e1000e 0000:04:00.0: eth0: 10/100 speed: disabling TSO
vmbr0: port 1(eth0) entering forwarding state
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Slow work thread pool: Starting up
Slow work thread pool: Ready
FS-Cache: Loaded
NFS: Registering the id_resolver key type
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
Netfilter messages via NETLINK v0.30.
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
Enabling conntracks and NAT for ve0
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ploop_dev: module loaded
ip_set: protocol 6
dummy0: no IPv6 routers present
vmbr1: no IPv6 routers present
venet0: no IPv6 routers present
CE: hpet3 increasing min_delta_ns to 40226 nsec
CE: hpet2 increasing min_delta_ns to 40226 nsec
hrtimer: interrupt took 30138 ns
CE: hpet4 increasing min_delta_ns to 40226 nsec
CE: hpet4 increasing min_delta_ns to 60338 nsec
CE: hpet3 increasing min_delta_ns to 60338 nsec
CE: hpet5 increasing min_delta_ns to 40226 nsec
CE: hpet3 increasing min_delta_ns to 90506 nsec
CE: hpet5 increasing min_delta_ns to 60338 nsec
CE: hpet2 increasing min_delta_ns to 60338 nsec
CE: hpet2 increasing min_delta_ns to 90506 nsec
CE: hpet4 increasing min_delta_ns to 90506 nsec
CE: hpet5 increasing min_delta_ns to 90506 nsec
CT: 104: started
device veth104.0 entered promiscuous mode
vmbr0: port 2(veth104.0) entering forwarding state
veth104.0: no IPv6 routers present
vmbr0: port 2(veth104.0) entering disabled state
device veth104.0 left promiscuous mode
vmbr0: port 2(veth104.0) entering disabled state
CT: 104: stopped
CE: hpet4 increasing min_delta_ns to 135758 nsec
CE: hpet3 increasing min_delta_ns to 135758 nsec
CE: hpet2 increasing min_delta_ns to 135758 nsec