Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 5.42 2011-10-20 r3458 [x86_64-linux-3.2.31] (local build)
- Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Model Family: SandForce Driven SSDs
- Device Model: OCZ-VERTEX3
- Serial Number: OCZ-1URJIF41K68K51Q0
- LU WWN Device Id: 5 e83a97 c5fd3f610
- Firmware Version: 2.22
- User Capacity: 60 022 480 896 bytes [60,0 GB]
- Sector Size: 512 bytes logical/physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: 8
- ATA Standard is: ACS-2 revision 3
- Local Time is: Sun Oct 28 10:31:56 2012 OMST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 0) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 48) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x0021) SCT Status supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 120 120 050 Pre-fail Always - 0/0
- 5 Retired_Block_Count 0x0033 100 100 003 Pre-fail Always - 0
- 9 Power_On_Hours_and_Msec 0x0032 021 021 000 Old_age Always - 19h+25m+57.460s
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 17
- 171 Program_Fail_Count 0x0032 000 000 000 Old_age Always - 0
- 172 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0
- 174 Unexpect_Power_Loss_Ct 0x0030 000 000 000 Old_age Offline - 13
- 177 Wear_Range_Delta 0x0000 000 000 000 Old_age Offline - 0
- 181 Program_Fail_Count 0x0032 000 000 000 Old_age Always - 0
- 182 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
- 194 Temperature_Celsius 0x0022 030 030 000 Old_age Always - 30 (Min/Max 30/30)
- 195 ECC_Uncorr_Error_Count 0x001c 100 100 000 Old_age Offline - 0/0
- 196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0
- 201 Unc_Soft_Read_Err_Rate 0x001c 100 100 000 Old_age Offline - 0/0
- 204 Soft_ECC_Correct_Rate 0x001c 100 100 000 Old_age Offline - 0/0
- 230 Life_Curve_Status 0x0013 100 100 000 Pre-fail Always - 100
- 231 SSD_Life_Left 0x0013 100 100 010 Pre-fail Always - 0
- 233 SandForce_Internal 0x0000 000 000 000 Old_age Offline - 19
- 234 SandForce_Internal 0x0032 000 000 000 Old_age Always - 16
- 241 Lifetime_Writes_GiB 0x0032 000 000 000 Old_age Always - 16
- 242 Lifetime_Reads_GiB 0x0032 000 000 000 Old_age Always - 5
- SMART Error Log not supported
- SMART Self-test Log not supported
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment