Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.11802
- Handling device: [Cyclone Team], [Cyclone Bootloader], [Platform: Classic]
- Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
- Initializing box...
- v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2011
- Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
- Box Serial Number: C0006E46
- 2009, wk23 / wk19
- Initializing security card...
- Card Serial Number: D00C043B
- Card Firmware Revision: 010A
- Card is activated
- Box is activated
- Super DCT4 Activation: TRUE
- XGold/Blackberry Service Running, Credits Left: 82
- Avaiable Physical Memory: 830.636MB
- Avaiable Virtual Memory: 1.366GB
- Avaiable Pagefile: 2.407GB
- Initializing FBUS...
- All initialized - Ready to work
- Booting CMT...
- CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
- CMT_EM_ASIC_ID: 00000296
- CMT_EM_ASIC_ID: 00000B22
- CMT_PUBLIC_ID: 1BF00014012B8D56FA5783E7AC1B6AF813FAD8CF
- CMT_ASIC_MODE_ID: 00
- CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
- CMT_SECURE_ROM_CRC: DFAAF68F
- CMT Ready!
- Searching for BootCode: DualLine 32Bit
- RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
- Flashbus Write baud set to 1.0Mbits
- Flashbus Read baud set to 98Kbits
- Using OLD BB5 FLASHING PROTOCOL
- If software STUCK HERE with box TX LED lit, that means:
- USING JAF/UFS CABLES!)
- 2. Your cable is not TX2 Enabled!
- 3. Transmission error occured, try again
- In either cases, you need to reconnect your box from USB.
- FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
- FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
- FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
- Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
- Searching for BootCode: DualLine 32Bit
- FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
- RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
- Flashbus Write baud set to 2.0Mbits
- Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
- Box TX2 Data Pin set to: Service Pin 3
- Box VPP disabled
- Internal CMT Phone VPP Enabled
- PAPUBKEYS Hash for CMT: 0C917F11196FDB7378C18EF7260698CA4489DCA0
- APE Boot skipped on user request
- Flashbus Write baud set to 5.0Mbits
- Restarting MCU...
- MCU Version V 07.95
- MCU Date 03-02-10
- Product RM-495 (Nokia 5130 XpressMusic)
- Manufacturer (c) Nokia
- IMEI 358318038708313
- Mastercode 7627504454
- IMEI Spare 3A85130883073801
- IMEI SV 3385130883073841F8000000
- PPM V 07.95, 03-02-10, RM-495, (c) Nokia , EB
- CNT Content: eb_red, V 07.95, 03-02-10, RM-495, (c) Nokia ,
- PSN DSG996745
- Product Code 0571387
- Module Code 0204024
- Basic Product Code 0567772
- PSD 0000000000000000
- LPSN 0
- RETU 16
- TAHVO 22
- AHNE 30
- HW 1000
- RFIC 06540601
- DSP ICPR72_10w01
- LCD SEIKO
- BT 2222-302
- Simlock Server SIMLOCK SERVER
- Simlock Key 2280100000000000
- Simlock Profile 8000000000000000
- Simlock Key Cnt 3
- Simlock FBUS Cnt 0
- Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 22801F
- Auto Selecting Flash Files on User Request...
- Product Code: 0571387
- This is Valid BB5 Product
- Retrieving Variants for Product RM-495 - wait...
- 6 Variants Retrieved
- Variant found for readen Product Data!
- Sending BB5 NCK Code...
- NCK[7] - ACCEPTED
- Booting CMT...
- CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
- CMT_EM_ASIC_ID: 00000296
- CMT_EM_ASIC_ID: 00000B22
- CMT_PUBLIC_ID: 1BF00014012B8D56FA5783E7AC1B6AF813FAD8CF
- CMT_ASIC_MODE_ID: 00
- CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
- CMT_SECURE_ROM_CRC: DFAAF68F
- CMT Ready!
- Searching for BootCode: DualLine 32Bit
- RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
- Flashbus Write baud set to 1.0Mbits
- Flashbus Read baud set to 98Kbits
- Using OLD BB5 FLASHING PROTOCOL
- If software STUCK HERE with box TX LED lit, that means:
- USING JAF/UFS CABLES!)
- 2. Your cable is not TX2 Enabled!
- 3. Transmission error occured, try again
- In either cases, you need to reconnect your box from USB.
- FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
- FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
- FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
- Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
- Searching for BootCode: DualLine 32Bit
- FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
- RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
- Flashbus Write baud set to 2.0Mbits
- Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
- Box TX2 Data Pin set to: Service Pin 3
- Box VPP disabled
- Internal CMT Phone VPP Enabled
- PAPUBKEYS Hash for CMT: 0C917F11196FDB7378C18EF7260698CA4489DCA0
- APE Boot skipped on user request
- Flashbus Write baud set to 5.0Mbits
- Restarting MCU...
- MCU Version V 07.95
- MCU Date 03-02-10
- Product RM-495 (Nokia 5130 XpressMusic)
- Manufacturer (c) Nokia
- IMEI 358318038708313
- Mastercode 7627504454
- IMEI Spare 3A85130883073801
- IMEI SV 3385130883073841F8000000
- PPM V 07.95, 03-02-10, RM-495, (c) Nokia , EB
- CNT Content: eb_red, V 07.95, 03-02-10, RM-495, (c) Nokia ,
- PSN DSG996745
- Product Code 0571387
- Module Code 0204024
- Basic Product Code 0567772
- PSD 0000000000000000
- LPSN 0
- RETU 16
- TAHVO 22
- AHNE 30
- HW 1000
- RFIC 06540601
- DSP ICPR72_10w01
- LCD SEIKO
- BT 2222-302
- Simlock Server SIMLOCK SERVER
- Simlock Key 2280100000000000
- Simlock Profile 8000000000000000
- Simlock Key Cnt 0
- Simlock FBUS Cnt 0
- Simlock [1,1] State: OPENED Type: MCC-MNC Data: 22801F
- Simlock NCK #pw+9_‚>94346094325+7#
- Auto Selecting Flash Files on User Request...
- Product Code: 0571387
- This is Valid BB5 Product
- Variant found for readen Product Data!
- Booting CMT...
- Failed to Boot CMT -> CMT Not Responding, Phone or Cable problem
- Prepare phone failed with message -> Failed to Boot CMT
- Failed to Check BB5 Flashing Bus -> Failed to Boot / Prepare Phone
- Booting CMT...
- Sending User Abort Signal...
- CBUS Request Error -> User abort
- Failed to Boot CMT -> No answer from CBUS
- Prepare phone failed with message -> Failed to Boot CMT
- Failed to Check BB5 Flashing Bus -> Failed to Boot / Prepare Phone
- MCU Version V 11.10
- MCU Date 13-05-11
- Product RM-721 (Nokia C2-01)
- Manufacturer (c) Nokia
- IMEI 359318043127797
- Mastercode 366626216
- IMEI Spare 3A95130834217709
- IMEI SV 3395130834217779F1000000
- PPM V 11.10, 13-05-11, RM-721, (c) Nokia , C
- CNT Content: Swisscom CH sl, V 11.10, 13-05-11, RM-721, (c) Nokia
- PSN 52D1DB4AH
- Product Code 059J299
- Module Code 0204769
- Basic Product Code 059C872
- PSD 0000000000000000
- LPSN 0
- RETU 51
- TAHVO 00
- AHNE 41
- HW 1001
- RFIC |Vapaus_6.5 | Mikki_1.1
- DSP SPR91_09w09_11w02
- LCD SEIKO
- BT 1673-46038
- Simlock Server SIMLOCK SERVER
- Simlock Key 2280100000000000
- Simlock Profile 8000000000000000
- Simlock Key Cnt 0
- Simlock FBUS Cnt 0
- Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 22801F
- Auto Selecting Flash Files on User Request...
- Product Code: 059J299
- This is Valid BB5 Product
- No variant found with given Product Code, selecting first one
- Reading SL3 LOG File...
- MCU Version V 11.10
- MCU Date 13-05-11
- Product RM-721 (Nokia C2-01)
- Manufacturer (c) Nokia
- IMEI 359318043127797
- Mastercode 366626216
- Analyzing Profile Bits...
- Phone can be NCK unlocked using KEYPAD
- Phone can be NCK unlocked using FBUS
- 15 Digits NCK Found
- read it...
- Reading CYC file from phone...
- Booting CMT...
- Failed to Boot CMT -> CMT Not Responding, Phone or Cable problem
- Prepare phone failed with message -> Failed to Boot CMT
- Neither CYC file and exists or failed to read it from phone (Failed to Boot / Prepare Phone)
- Failed to Read SL3 LOG File -> Failed to obtain Phone Unique Data
- Reading SL3 LOG File...
- MCU Version V 11.10
- MCU Date 13-05-11
- Product RM-721 (Nokia C2-01)
- Manufacturer (c) Nokia
- IMEI 359318043127797
- Mastercode 366626216
- Analyzing Profile Bits...
- Phone can be NCK unlocked using KEYPAD
- Phone can be NCK unlocked using FBUS
- 15 Digits NCK Found
- read it...
- Reading CYC file from phone...
- Booting CMT...
- Failed to Boot CMT -> First block checksum error
- Prepare phone failed with message -> Failed to Boot CMT
- Neither CYC file and exists or failed to read it from phone (Failed to Boot / Prepare Phone)
- Failed to Read SL3 LOG File -> Failed to obtain Phone Unique Data
- Reading SL3 LOG File...
- MCU Version V 11.10
- MCU Date 13-05-11
- Product RM-721 (Nokia C2-01)
- Manufacturer (c) Nokia
- IMEI 359318043127797
- Mastercode 366626216
- Analyzing Profile Bits...
- Phone can be NCK unlocked using KEYPAD
- Phone can be NCK unlocked using FBUS
- 15 Digits NCK Found
- read it...
- Reading CYC file from phone...
- Booting CMT...
- Failed to Boot CMT -> CMT Not Responding, Phone or Cable problem
- Prepare phone failed with message -> Failed to Boot CMT
- Neither CYC file and exists or failed to read it from phone (Failed to Boot / Prepare Phone)
- Failed to Read SL3 LOG File -> Failed to obtain Phone Unique Data
- Reading SL3 LOG File...
- MCU Version V 11.10
- MCU Date 13-05-11
- Product RM-721 (Nokia C2-01)
- Manufacturer (c) Nokia
- IMEI 359318043127797
- Mastercode 366626216
- Sending User Abort Signal...
- Sending User Abort Signal...
- Sending User Abort Signal...
- Sending User Abort Signal...
- CBUS Request Error -> User abort
- Sending User Abort Signal...
- Sending User Abort Signal...
- CBUS Request Error -> User abort
- Warning: Failed to read SP Info, Assuming defaults
- Analyzing Profile Bits...
- Phone can be NCK unlocked using KEYPAD
- Phone can be NCK unlocked using FBUS
- Sending User Abort Signal...
- CBUS Request Error -> User abort
- Failed to Read SL3 LOG File -> Failed to get SL3 Unlock Data
- MCU Version V 11.10
- MCU Date 13-05-11
- Product RM-721 (Nokia C2-01)
- Manufacturer (c) Nokia
- IMEI 359318043127797
- Mastercode 366626216
- IMEI Spare 3A95130834217709
- IMEI SV 3395130834217779F1000000
- PPM V 11.10, 13-05-11, RM-721, (c) Nokia , C
- CNT Content: Swisscom CH sl, V 11.10, 13-05-11, RM-721, (c) Nokia
- PSN 52D1DB4AH
- Product Code 059J299
- Module Code 0204769
- Basic Product Code 059C872
- PSD 0000000000000000
- LPSN 0
- RETU 51
- TAHVO 00
- AHNE 41
- HW 1001
- RFIC |Vapaus_6.5 | Mikki_1.1
- DSP SPR91_09w09_11w02
- LCD SEIKO
- BT 1673-46038
- Simlock Server SIMLOCK SERVER
- Simlock Key 2280100000000000
- Simlock Profile 8000000000000000
- Simlock Key Cnt 0
- Simlock FBUS Cnt 0
- Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 22801F
- Auto Selecting Flash Files on User Request...
- Product Code: 059J299
- This is Valid BB5 Product
- No variant found with given Product Code, selecting first one
- Reading SL3 LOG File...
- MCU Version V 11.10
- MCU Date 13-05-11
- Product RM-721 (Nokia C2-01)
- Manufacturer (c) Nokia
- IMEI 359318043127797
- Mastercode 366626216
- Analyzing Profile Bits...
- Phone can be NCK unlocked using KEYPAD
- Phone can be NCK unlocked using FBUS
- 15 Digits NCK Found
- read it...
- Reading CYC file from phone...
- Booting CMT...
- Failed to Boot CMT -> CMT Not Responding, Phone or Cable problem
- Prepare phone failed with message -> Failed to Boot CMT
- Neither CYC file and exists or failed to read it from phone (Failed to Boot / Prepare Phone)
- Failed to Read SL3 LOG File -> Failed to obtain Phone Unique Data
- Reading SL3 LOG File...
- MCU Version V 11.10
- MCU Date 13-05-11
- Product RM-721 (Nokia C2-01)
- Manufacturer (c) Nokia
- IMEI 359318043127797
- Mastercode 366626216
- Analyzing Profile Bits...
- Phone can be NCK unlocked using KEYPAD
- Phone can be NCK unlocked using FBUS
- 15 Digits NCK Found
- read it...
- Reading CYC file from phone...
- Booting CMT...
- Failed to Boot CMT -> CMT Not Responding, Phone or Cable problem
- Prepare phone failed with message -> Failed to Boot CMT
- Neither CYC file and exists or failed to read it from phone (Failed to Boot / Prepare Phone)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement