2016-02-07 03:14:20 ★ Tim Ramsay drops his dufflebag on the floor, unzipping it and pulling out a screw driver.

2016-02-07 03:14:32 ★ Tim Ramsay lifts the hood up, grabs a socket and holds it near the negative terminal of the battery -

2016-02-07 03:14:43 ★ determining the size socket does he need.      ((Tim Ramsay))

2016-02-07 03:15:08 ★ Tim Ramsay grabs the socket wrench and puts the matched socket on it.

2016-02-07 03:15:33 ★ Tim Ramsay puts the wrench on the nut on the negative terminal and turns counterclockwise.

2016-02-07 03:15:34 ★ Tim Ramsay pulls the negative connector from the battery after loosening the nut.

2016-02-07 03:15:47 ★ Tim Ramsay repeats the same procedure with the right terminal.

2016-02-07 03:15:59 ★ Tim Ramsay lifts the battery straight up, out of its tray as he places it on the ground.

2016-02-07 03:16:14 ★ Tim Ramsay reaches for his toolbox as he gets a screwdriver and starts unscrewing the front lights-

2016-02-07 03:16:33 ★ pulling them out of their place and placing them inside a crate.      ((Tim Ramsay))

2016-02-07 03:16:51 ★ Tim Ramsay crouches as he gets his philips screw driver and starts removing the front bumper.

2016-02-07 03:17:02 ★ Tim Ramsay would pulls it out of his place and places it on the floor.

2016-02-07 03:17:15 ★ Tim Ramsay would then unscrew the colling fan and get off its place to place it on the floor.

2016-02-07 03:17:27 ★ Tim Ramsay moves to the radiator and starts removing the screws attaching it to the engine -

2016-02-07 03:17:39 ★ removing it and placing it near the cooling fan.      ((Tim Ramsay))

2016-02-07 03:17:53 ★ Tim Ramsay hops inside the vehicle, opening the trunk and goes behind the car.

2016-02-07 03:18:06 ★ Tim Ramsay would start removing the back bumper, placing it near to the front one.
 2016-02-07 03:18:27 ★ Tim Ramsay goes to the back lights and pulls them out of their place as he heads to the crate and place

2016-02-07 03:18:40 ★ them near the front lights.      ((Tim Ramsay))

2016-02-07 03:18:53 ★ Tim Ramsay lowers the trunk, starts unscrewing the spoiler placing it near the two bumpers.

2016-02-07 03:19:06 ★ Tim Ramsay would go inside the car, start gently removing the plastic fixing the windows.

2016-02-07 03:19:18 ★ Tim Ramsay removes the window and heads back to another one.

2016-02-07 03:19:41 ★ you would see him repeating the same procces with the other windows.      ((Tim Ramsay))

2016-02-07 03:19:53 ★ Tim Ramsay would push the car on the lift, pulling out the lifter remote and lifts it up.

2016-02-07 03:20:07 ★ Tim Ramsay would get an angle grinder and starts cuting out welding fixing the exhausts.

2016-02-07 03:20:24 ★ he would be wearing two leather gloves and a special glasses to protect his eyes.      ((Tim Ramsay))

2016-02-07 03:20:39 ★ you would see the sparks going out of the welding while he's cutting it.      ((Tim Ramsay))

2016-02-07 03:20:53 ★ Tim Ramsay moves to the gaz tank as soon as he finishes the exhausts, starts removing it.

2016-02-07 03:21:07 ★ Tim Ramsay would take them both and place them away.

2016-02-07 03:21:29 ★ Tim Ramsay gets a flathead screwdriver and starts removing the hub caps of the right wheel.

2016-02-07 03:21:47 ★ Tim Ramsay would place his fingers under the car looking for its jacking point, getting out the jack -
 2016-02-07 03:22:01 ★ placing it under them to lift the car a bit.      ((Tim Ramsay))

2016-02-07 03:22:19 ★ Tim Ramsay would pull out the tire of its place, as he heads to the desk and gets a scaffolder so the

2016-02-07 03:22:45 ★ car doesn't fell down.      ((Tim Ramsay))
 2016-02-07 03:23:00 ★ Tim Ramsay would remove the jack and heads back to another wheel repeating the same thing.

2016-02-07 03:23:18 ★ After he finishes removing the wheels, you would see him move and get inside the car-      ((Tim Ramsay))

2016-02-07 03:23:32 ★ again as he gets a crate and place it on the right seat.      ((Tim Ramsay))

2016-02-07 03:23:46 ★ Tim Ramsay would get his screwdriver out of his pocket and starts removing the steering wheel-

2016-02-07 03:24:01 ★ placing it in the crate.      ((Tim Ramsay))

2016-02-07 03:24:14 ★ Tim Ramsay would place his screwdriver in his pocket and pulls out the car radio.

2016-02-07 03:24:26 ★ Tim Ramsay would then pull out the dashboard.

2016-02-07 03:24:42 ★ Tim Ramsay would step out of the car.

2016-02-07 03:24:53 ★ Tim Ramsay heads to the car hood and starts removing and marking the hinges with a sharpie -

2016-02-07 03:25:05 ★ Tim Ramsay disconnects the intake air supply and fuel lines.

2016-02-07 03:25:19 ★ Tim Ramsay unbolts and pulls aside the power steering pump and air conditioning compressor, placing -

2016-02-07 03:26:26 ★ them on the floor.      ((Tim Ramsay))

2016-02-07 03:26:39 ★ Tim Ramsay would look for electric wires connected to the engine and starts cutting them with his wire-

2016-02-07 03:26:51 ★ cutter.      ((Tim Ramsay))

2016-02-07 03:27:03 ★ Tim Ramsay gets the jack back, jacking the car up again and slips under it.

2016-02-07 03:27:17 ★ Tim Ramsay gets the bigsize flathead screwdriver and starts loosing transmission connections -

2016-02-07 03:27:30 ★ at the cross member.      ((Tim Ramsay))

2016-02-07 03:27:50 ★ Tim Ramsay starts unbolting the tranny pull.

2016-02-07 03:28:05 ★ Tim Ramsay would push the removed parts away to leave enough space for him.

2016-02-07 03:28:40 ★ Tim Ramsay pushes him self and stands up as he starts removing the jack.

2016-02-07 03:28:52 ★ Tim Ramsay pushes the car under the hoist bringing it up and connecting the chains to the biggest bolts.

2016-02-07 03:29:07 ★ Tim Ramsay slowly adjusts the hoist to fit the front higher.

2016-02-07 03:29:20 ★ Tim Ramsay would slowly starts lifting the engine out of the car placing it on a corner of the garage.

2016-02-07 03:29:32 ★ Tim Ramsay would bends over and starts collecting the small parts and placing them inside a crate.

2016-02-07 03:29:43 ★ Tim Ramsay would then push the crates into another corner of the garage collecting them.