API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Feb 23rd, 2013
71
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 13.86 KB | None | 0 0
raw download clone embed print report diff
  1. Uncompressing Linux... done, booting the kernel.
  2. [ 0.000000] Booting Linux on physical CPU 0
  3. [ 0.000000] Initializing cgroup subsys cpuset
  4. [ 0.000000] Initializing cgroup subsys cpu
  5. [ 0.000000] Linux version 3.5.0 (bakers@Whisper-II) (gcc version 4.6.4 20120303 (prerelease) (GCC) ) #11 PREEM3
  6. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
  7. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  8. [ 0.000000] Machine: Gumstix Overo
  9. [ 0.000000] Reserving 12582912 bytes SDRAM for VRAM
  10. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  11. [ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
  12. [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
  13. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 118528
  14. [ 0.000000] Kernel command line: console=ttyO2,115200n8 mpurate=800 vram=12M omapfb.mode=dvi:1024x768MR-16@60 t
  15. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  16. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  17. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  18. [ 0.000000] allocated 1048576 bytes of page_cgroup
  19. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  20. [ 0.000000] Memory: 96MB 371MB = 467MB total
  21. [ 0.000000] Memory: 464440k/464440k available, 27080k reserved, 0K highmem
  22. [ 0.000000] Virtual kernel memory layout:
  23. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  24. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  25. [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  26. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  27. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  28. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  29. [ 0.000000] .text : 0xc0008000 - 0xc070c9b8 (7187 kB)
  30. [ 0.000000] .init : 0xc070d000 - 0xc0746be8 ( 231 kB)
  31. [ 0.000000] .data : 0xc0748000 - 0xc07b6f78 ( 444 kB)
  32. [ 0.000000] .bss : 0xc07b6f9c - 0xc0842860 ( 559 kB)
  33. [ 0.000000] NR_IRQS:474
  34. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
  35. [ 0.000000] Total of 96 interrupts on 1 active controller
  36. [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
  37. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  38. [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
  39. [ 0.000000] Console: colour dummy device 80x30
  40. [ 0.000213] Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720)
  41. [ 0.039093] pid_max: default: 32768 minimum: 301
  42. [ 0.039276] Security Framework initialized
  43. [ 0.039398] Mount-cache hash table entries: 512
  44. [ 0.040161] Initializing cgroup subsys debug
  45. [ 0.040161] Initializing cgroup subsys cpuacct
  46. [ 0.040191] Initializing cgroup subsys memory
  47. [ 0.040222] Initializing cgroup subsys devices
  48. [ 0.040252] Initializing cgroup subsys freezer
  49. [ 0.040252] Initializing cgroup subsys perf_event
  50. [ 0.040374] CPU: Testing write buffer coherency: ok
  51. [ 0.040649] Setting up static identity map for 0x804e0468 - 0x804e04c0
  52. [ 0.044952] devtmpfs: initialized
  53. [ 0.049743] dummy:
  54. [ 0.050079] NET: Registered protocol family 16
  55. [ 0.050537] GPMC revision 5.0
  56. [ 0.050598] gpmc: irq-20 could not claim: err -22
  57. [ 0.052246] OMAP GPIO hardware version 2.5
  58. [ 0.054473] omap_mux_init: Add partition: #1: core, flags: 0
  59. [ 0.059326] _omap_mux_get_by_name: Could not find signal uart4_rx.uart4_rx
  60. [ 0.065155] Reprogramming SDRC clock to 400000000 Hz
  61. [ 0.065155] dpll3_m2_clk rate change failed: -22
  62. [ 0.065185] Found NAND on CS0
  63. [ 0.065185] Registering NAND on CS0
  64. [ 0.066345] usbhs_omap: alias fck already exists
  65. [ 0.067108] _omap_mux_get_by_name: Could not find signal 126
  66. [ 0.067138] overo_camera_init
  67. [ 0.073974] hw-breakpoint: debug architecture 0x4 unsupported.
  68. [ 0.076873] omap-mcbsp.2: alias fck already exists
  69. [ 0.077056] omap-mcbsp.3: alias fck already exists
  70. [ 0.078063] Switched to new clocking rate (Crystal/Core/MPU): 26.0/400/800 MHz
  71. [ 0.078277] OMAP DMA hardware revision 5.0
  72. [ 0.084899] bio: create slab <bio-0> at 0
  73. [ 0.085449] fixed-dummy:
  74. [ 0.085693] vads7846: 3300 mV
  75. [ 0.086364] SCSI subsystem initialized
  76. [ 0.086639] usbcore: registered new interface driver usbfs
  77. [ 0.086700] usbcore: registered new interface driver hub
  78. [ 0.086914] usbcore: registered new device driver usb
  79. [ 0.087280] omap_i2c omap_i2c.1: bus 1 rev1.4.0 at 2600 kHz
  80. [ 0.089599] twl 1-0048: PIH (irq 7) chaining IRQs 320..328
  81. [ 0.089691] twl 1-0048: power (irq 325) chaining IRQs 328..335
  82. [ 0.090179] twl4030_gpio twl4030_gpio: gpio (irq 320) chaining IRQs 336..353
  83. [ 0.091064] VUSB1V5: 1500 mV normal standby
  84. [ 0.091430] VUSB1V8: 1800 mV normal standby
  85. [ 0.091796] VUSB3V1: 3100 mV normal standby
  86. [ 0.093322] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
  87. [ 0.093719] vdd_mpu_iva: 600 <--> 1450 mV normal
  88. [ 0.094116] vdd_core: 600 <--> 1450 mV normal
  89. [ 0.094543] VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby
  90. [ 0.094970] VDAC: 1800 mV normal standby
  91. [ 0.095397] VDVI: 1800 mV normal standby
  92. [ 0.109466] omap_i2c omap_i2c.3: bus 3 rev1.4.0 at 100 kHz
  93. [ 0.109680] Linux media interface: v0.10
  94. [ 0.109741] Linux video capture interface: v2.00
  95. [ 0.110198] omap-iommu omap-iommu.0: isp registered
  96. [ 0.110321] Advanced Linux Sound Architecture Driver Version 1.0.25.
  97. [ 0.111053] Switching to clocksource 32k_counter
  98. [ 0.135742] usbhs_omap usbhs_omap: xclk60mhsp2_ck set parentfailed error:-22
  99. [ 0.136383] NET: Registered protocol family 2
  100. [ 0.136627] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  101. [ 0.137054] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  102. [ 0.137329] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  103. [ 0.137481] TCP: Hash tables configured (established 16384 bind 16384)
  104. [ 0.137481] TCP: reno registered
  105. [ 0.137512] UDP hash table entries: 256 (order: 0, 4096 bytes)
  106. [ 0.137512] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  107. [ 0.137756] NET: Registered protocol family 1
  108. [ 0.138214] RPC: Registered named UNIX socket transport module.
  109. [ 0.138214] RPC: Registered udp transport module.
  110. [ 0.138214] RPC: Registered tcp transport module.
  111. [ 0.138214] RPC: Registered tcp NFSv4.1 backchannel transport module.
  112. [ 0.140380] audit: initializing netlink socket (disabled)
  113. [ 0.140441] type=2000 audit(0.132:1): initialized
  114. [ 0.141601] VFS: Disk quotas dquot_6.5.2
  115. [ 0.141693] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  116. [ 0.142303] NFS: Registering the id_resolver key type
  117. [ 0.142364] Key type id_resolver registered
  118. [ 0.142852] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  119. [ 0.143402] fuse init (API version 7.19)
  120. [ 0.143829] msgmni has been set to 907
  121. [ 0.145263] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  122. [ 0.145294] io scheduler noop registered
  123. [ 0.145294] io scheduler deadline registered (default)
  124. [ 0.145935] OMAP DSS rev 2.0
  125. [ 0.148437] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
  126. [ 0.148803] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
  127. [ 0.149169] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
  128. [ 0.854400] console [ttyO2] enabled
  129. [ 0.858398] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
  130. [ 0.872436] brd: module loaded
  131. [ 0.878906] loop: module loaded
  132. [ 0.884185] twl4030_madc twl4030_madc: clk disabled, enabling
  133. [ 0.891876] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB 1,8V 16-bit), page size: 2044
  134. [ 0.904418] Creating 5 MTD partitions on "omap2-nand.0":
  135. [ 0.910034] 0x000000000000-0x000000080000 : "xloader"
  136. [ 0.916564] 0x000000080000-0x000000240000 : "uboot"
  137. [ 0.923553] 0x000000240000-0x000000280000 : "uboot environment"
  138. [ 0.930725] 0x000000280000-0x000000680000 : "linux"
  139. [ 0.939147] 0x000000680000-0x000020000000 : "rootfs"
  140. [ 1.263946] smsc911x: Driver version 2008-10-21
  141. [ 1.270172] smsc911x-mdio: probed
  142. [ 1.273742] smsc911x smsc911x.0: eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=smsc911x-0:01, irq)
  143. [ 1.284851] smsc911x smsc911x.0: eth0: MAC Address: fa:ac:4a:57:38:ac
  144. [ 1.291625] smsc911x: Driver version 2008-10-21
  145. [ 1.297546] usbcore: registered new interface driver asix
  146. [ 1.303283] usbcore: registered new interface driver cdc_ether
  147. [ 1.309478] usbcore: registered new interface driver cdc_ncm
  148. [ 1.315643] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  149. [ 2.330047] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
  150. [ 2.336181] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
  151. [ 2.344024] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
  152. [ 2.361267] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
  153. [ 2.367401] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  154. [ 2.374511] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  155. [ 2.382080] usb usb1: Product: OMAP-EHCI Host Controller
  156. [ 2.387634] usb usb1: Manufacturer: Linux 3.5.0 ehci_hcd
  157. [ 2.393188] usb usb1: SerialNumber: ehci-omap.0
  158. [ 2.398468] hub 1-0:1.0: USB hub found
  159. [ 2.402435] hub 1-0:1.0: 3 ports detected
  160. [ 2.431701] Initializing USB Mass Storage driver...
  161. [ 2.436920] usbcore: registered new interface driver usb-storage
  162. [ 2.443206] USB Mass Storage support registered.
  163. [ 2.448028] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
  164. [ 2.460327] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
  165. [ 2.470886] mousedev: PS/2 mouse device common for all mice
  166. [ 2.477172] twl_rtc twl_rtc: Power up reset detected.
  167. [ 2.482604] twl_rtc twl_rtc: Enabling TWL-RTC
  168. [ 2.489685] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
  169. [ 2.496612] i2c /dev entries driver
  170. [ 2.500915] omap3isp omap3isp: Revision 15.0 found
  171. [ 2.506164] omap-iommu omap-iommu.0: isp: version 1.1
  172. [ 2.513519] tvp514x 3-005c: Write: retry ... 0
  173. [ 2.541107] tvp514x 3-005c: Write: retry ... 1
  174. [ 2.564544] tvp514x 3-005c: Write: retry ... 2
  175. [ 2.587982] tvp514x 3-005c: Write: retry ... 3
  176. [ 2.611450] tvp514x 3-005c: Write: retry ... 4
  177. [ 2.634887] tvp514x 3-005c: Write: retry ... 5
  178. [ 2.658294] tvp514x 3-005c: tvp514x 3-005c decoder driver registered !!
  179. [ 2.665252] ------------[ cut here ]------------
  180. [ 2.670074] kernel BUG at drivers/media/media-entity.c:399!
  181. [ 2.675872] Internal error: Oops - BUG: 0 [#1] PREEMPT ARM
  182. [ 2.681579] Modules linked in:
  183. [ 2.684783] CPU: 0 Not tainted (3.5.0 #11)
  184. [ 2.689422] PC is at media_entity_create_link+0x3c/0xe8
  185. [ 2.694854] LR is at isp_probe+0x79c/0x994
  186. [ 2.699127] pc : [<c03879dc>] lr : [<c04d6258>] psr: 60000013
  187. [ 2.699127] sp : dec2be98 ip : 22222222 fp : 00000000
  188. [ 2.711090] r10: deee0800 r9 : 00000000 r8 : deef8fd8
  189. [ 2.716522] r7 : deef8fd8 r6 : 00000000 r5 : 00000000 r4 : 00000000
  190. [ 2.723327] r3 : 00000000 r2 : deef8fd8 r1 : 00000000 r0 : deee0800
  191. [ 2.730133] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
  192. [ 2.737731] Control: 10c5387d Table: 80004019 DAC: 00000015
  193. [ 2.743713] Process swapper (pid: 1, stack limit = 0xdec2a2f0)
  194. [ 2.749786] Stack: (0xdec2be98 to 0xdec2c000)
  195. [ 2.754333] be80: deef0000 c0763c04
  196. [ 2.762847] bea0: deee0800 c07633fc deef8fd8 00000000 c0755308 c04d6258 00000000 deef0000
  197. [ 2.771362] bec0: 00000000 deef94c8 deef9f18 deef0388 deef051c c07630b8 c079701c c0755308
  198. [ 2.779876] bee0: c079701c c079701c 00000000 000000af c074681c c070d208 00000000 c02e63c8
  199. [ 2.788421] bf00: c02e63b4 c02e5100 c079701c c0755308 c0755308 c075533c c079701c c02e5350
  200. [ 2.796936] bf20: c079701c dec2bf30 c02e52f0 c02e3834 dec077d8 dec868f0 c079701c c079701c
  201. [ 2.805450] bf40: deeda140 c078d568 00000000 c02e46d8 c062ca3a c062ca3b dec2bf60 c079701c
  202. [ 2.813964] bf60: c0731c4c 00000000 c07b6fc0 000000af c070d208 c02e5870 00000000 00000006
  203. [ 2.822509] bf80: c0731c4c 00000000 c07b6fc0 000000af c070d208 c0008674 00000006 00000006
  204. [ 2.831024] bfa0: 00000000 00000006 c073c428 00000006 c073c42c c073c40c c07b6fc0 000000af
  205. [ 2.839538] bfc0: c074681c c070d8c4 00000006 00000006 c070d208 00000000 00000000 c070d790
  206. [ 2.848052] bfe0: c000eac4 00000013 00000000 00000000 00000000 c000eac4 ffffe3ff afaffff7
  207. [ 2.856597] [<c03879dc>] (media_entity_create_link+0x3c/0xe8) from [<c04d6258>] (isp_probe+0x79c/0x994)
  208. [ 2.866394] [<c04d6258>] (isp_probe+0x79c/0x994) from [<c02e63c8>] (platform_drv_probe+0x14/0x18)
  209. [ 2.875640] [<c02e63c8>] (platform_drv_probe+0x14/0x18) from [<c02e5100>] (driver_probe_device+0x144/0x334)
  210. [ 2.885803] [<c02e5100>] (driver_probe_device+0x144/0x334) from [<c02e5350>] (__driver_attach+0x60/0x84)
  211. [ 2.895690] [<c02e5350>] (__driver_attach+0x60/0x84) from [<c02e3834>] (bus_for_each_dev+0x4c/0x78)
  212. [ 2.905120] [<c02e3834>] (bus_for_each_dev+0x4c/0x78) from [<c02e46d8>] (bus_add_driver+0xc0/0x240)
  213. [ 2.914550] [<c02e46d8>] (bus_add_driver+0xc0/0x240) from [<c02e5870>] (driver_register+0x9c/0x128)
  214. [ 2.923980] [<c02e5870>] (driver_register+0x9c/0x128) from [<c0008674>] (do_one_initcall+0x90/0x160)
  215. [ 2.933502] [<c0008674>] (do_one_initcall+0x90/0x160) from [<c070d8c4>] (kernel_init+0x134/0x1f4)
  216. [ 2.942749] [<c070d8c4>] (kernel_init+0x134/0x1f4) from [<c000eac4>] (kernel_thread_exit+0x0/0x8)
  217. [ 2.951995] Code: e7f001f2 e1d032b4 e1530001 8a000000 (e7f001f2)
  218. [ 2.958435] ---[ end trace 60552e62105d1631 ]---
  219. [ 2.963287] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
  220. [ 2.963287]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!