Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot SPL 2016.01-00001-g3f205b0 (Mar 01 2016 - 14:23:49)
- Trying to boot from MMC
- SPL: Please implement spl_start_uboot() for your board
- SPL: Direct Linux boot not active!
- reading u-boot.img
- reading u-boot.img
- U-Boot 2016.01-00001-g3f205b0 (Mar 01 2016 - 14:23:49 -0600), Build: jenkins-github_Bootloader-Builder-337
- OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 MHz
- OMAP3 Beagle board + LPDDR/NAND
- I2C: ready
- DRAM: 256 MiB
- NAND: 256 MiB
- MMC: OMAP SD/MMC: 0
- *** Warning - bad CRC, using default environment
- Beagle Rev C4
- Timed out in wait_for_event: status=0000
- Check if pads/pull-ups of bus 1 are properly configured
- No EEPROM on expansion board
- Timed out in wait_for_event: status=0000
- Check if pads/pull-ups of bus 1 are properly configured
- No EEPROM on expansion board
- OMAP die ID: 1401d01c04037305000000002eaa0004Net: usb_ether
- Error: usb_ether address not set.
- Hit any key to stop autoboot: 0
- switch to partitions #0, OK
- mmc0 is current device
- SD/MMC found on device 0
- Checking for: /uEnv.txt ...
- Checking for: /boot/uEnv.txt ...
- 295 bytes read in 28 ms (9.8 KiB/s)
- Loaded environment from /boot/uEnv.txt
- Checking if uname_r is set in /boot/uEnv.txt...
- Running uname_boot ...
- loading /boot/vmlinuz-4.4.1-armv7-x5 ...
- 5699696 bytes read in 452 ms (12 MiB/s)
- loading /boot/dtbs/4.4.1-armv7-x5/omap3-beagle.dtb ...
- 107105 bytes read in 153 ms (683.6 KiB/s)
- loading /boot/initrd.img-4.4.1-armv7-x5 ...
- 12722954 bytes read in 968 ms (12.5 MiB/s)
- debug: [console=ttyO2,115200n8 root=UUID=4817de6d-b3bb-4fb5-8157-492d5eedb08a ro rootfstype=ext4 rootwait musb_hdrc.fifo_mode=5 coherent_pool=1M quiet] ...
- debug: [bootz 0x82000000 0x88080000:c2230a 0x88000000] ...
- Kernel image @ 0x82000000 [ 0x000000 - 0x56f870 ]
- ## Flattened Device Tree blob at 88000000
- Booting using the fdt blob at 0x88000000
- Loading Ramdisk to 8f3dd000, end 8ffff30a ...
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement