Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
- Subsystem: Dell Device 01a3
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
- Latency: 0
- Capabilities: [e0] Vendor Specific Information: Len=09 <?>
- Kernel driver in use: agpgart-intel
- 00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) (prog-if 00 [VGA controller])
- Subsystem: Dell Device 01a3
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 16
- Region 0: Memory at dff00000 (32-bit, non-prefetchable) [size=512K]
- Region 1: I/O ports at ec38 [size=8]
- Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
- Region 3: Memory at dfec0000 (32-bit, non-prefetchable) [size=256K]
- Expansion ROM at <unassigned> [disabled]
- Capabilities: [d0] Power Management version 2
- Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- 00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
- Subsystem: Dell Device 01a3
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Region 0: Memory at dff80000 (32-bit, non-prefetchable) [size=512K]
- Capabilities: [d0] Power Management version 2
- Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- 00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
- I/O behind bridge: 0000f000-00000fff
- Memory behind bridge: dfd00000-dfdfffff
- Prefetchable memory behind bridge: 0000000054000000-00000000541fffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
- ExtTag+ RBE- FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
- ClockPM- Surprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
- Slot #2, PowerLimit 6.500W; Interlock- NoCompl-
- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
- Changed: MRL- PresDet+ LinkState-
- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
- RootCap: CRSVisible-
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
- Address: fee0100c Data: 4169
- Capabilities: [90] Subsystem: Gammagraphx, Inc. (or missing ID) Device 0000
- Capabilities: [a0] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [100 v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed+ WRR32- WRR64- WRR128-
- Ctrl: ArbSelect=Fixed
- Status: InProgress-
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
- Status: NegoPending- InProgress-
- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
- Status: NegoPending- InProgress-
- Capabilities: [180 v1] Root Complex Link
- Desc: PortNumber=01 ComponentID=02 EltType=Config
- Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
- Addr: 00000000f0008001
- Kernel driver in use: pcieport
- 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) (prog-if 00 [UHCI])
- Subsystem: Dell Device 01a3
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 16
- Region 4: I/O ports at bf80 [size=32]
- Kernel driver in use: uhci_hcd
- 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) (prog-if 00 [UHCI])
- Subsystem: Dell Device 01a3
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin B routed to IRQ 17
- Region 4: I/O ports at bf60 [size=32]
- Kernel driver in use: uhci_hcd
- 00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) (prog-if 00 [UHCI])
- Subsystem: Dell Device 01a3
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin C routed to IRQ 18
- Region 4: I/O ports at bf40 [size=32]
- Kernel driver in use: uhci_hcd
- 00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) (prog-if 00 [UHCI])
- Subsystem: Dell Device 01a3
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin D routed to IRQ 19
- Region 4: I/O ports at bf20 [size=32]
- Kernel driver in use: uhci_hcd
- 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
- Subsystem: Dell Device 01a3
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 16
- Region 0: Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
- Capabilities: [50] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [58] Debug port: BAR=1 offset=00a0
- Kernel driver in use: ehci_hcd
- 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3) (prog-if 01 [Subtractive decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Bus: primary=00, secondary=02, subordinate=06, sec-latency=32
- I/O behind bridge: 0000f000-00000fff
- Memory behind bridge: dfc00000-dfcfffff
- Prefetchable memory behind bridge: 0000000050000000-0000000053ffffff
- Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [50] Subsystem: Dell Device 01a3
- 00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
- Subsystem: Dell Device 01a3
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 16
- Region 0: I/O ports at ed00 [size=256]
- Region 1: I/O ports at ec40 [size=64]
- Region 2: Memory at dfebfe00 (32-bit, non-prefetchable) [size=512]
- Region 3: Memory at dfebfd00 (32-bit, non-prefetchable) [size=256]
- Capabilities: [50] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Kernel driver in use: Intel ICH
- 00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic])
- Subsystem: Conexant Systems, Inc. Device 5423
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin B routed to IRQ 17
- Region 0: I/O ports at ee00 [size=256]
- Region 1: I/O ports at ec80 [size=128]
- Capabilities: [50] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Kernel driver in use: hsfich
- 00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
- Subsystem: Dell Device 01a3
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- 00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
- Subsystem: Dell Device 01a3
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 16
- Region 0: I/O ports at 01f0 [size=8]
- Region 1: I/O ports at 03f4 [size=1]
- Region 2: I/O ports at 0170 [size=8]
- Region 3: I/O ports at 0374 [size=1]
- Region 4: I/O ports at bfa0 [size=16]
- Kernel driver in use: ata_piix
- 00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
- Subsystem: Dell Device 01a3
- Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Interrupt: pin B routed to IRQ 17
- Region 4: I/O ports at 10c0 [size=32]
- Kernel driver in use: i801_smbus
- 01:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)
- Subsystem: Dell Device 01a3
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 16
- Region 0: Memory at dfdf0000 (64-bit, non-prefetchable) [size=64K]
- Capabilities: [48] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
- Capabilities: [50] Vital Product Data
- Product Name: Broadcom NetXtreme Gigabit Ethernet Controller
- Read-only fields:
- [PN] Part number: BCM95751
- [EC] Engineering changes: 106679-15
- [SN] Serial number: 0123456789
- [MN] Manufacture ID: 31 34 65 34
- [RV] Reserved: checksum bad, 28 byte(s) reserved
- Read/write fields:
- [YA] Asset tag: XYZ01234567
- [RW] Read-write area: 107 byte(s) free
- End
- Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
- Address: c44f20075742ac00 Data: 5bdc
- Capabilities: [d0] Express (v1) Endpoint, MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
- ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 512 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <2us, L1 <64us
- ClockPM- Surprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- Capabilities: [100 v1] Advanced Error Reporting
- UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
- CESta: RxErr- BadTLP- BadDLLP+ Rollover- Timeout- NonFatalErr-
- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
- AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
- Capabilities: [13c v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed- WRR32- WRR64- WRR128-
- Ctrl: ArbSelect=Fixed
- Status: InProgress-
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
- Status: NegoPending- InProgress-
- Kernel driver in use: tg3
- 02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
- Subsystem: Dell Device 01a3
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 168
- Interrupt: pin A routed to IRQ 19
- Region 0: Memory at dfc00000 (32-bit, non-prefetchable) [size=4K]
- Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
- Memory window 0: 50000000-53fff000 (prefetchable)
- Memory window 1: 58000000-5bfff000
- I/O window 0: 00001400-000014ff
- I/O window 1: 00001800-000018ff
- BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
- 16-bit legacy interface ports at 0001
- Kernel driver in use: yenta_cardbus
- 02:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08) (prog-if 10 [OHCI])
- Subsystem: Dell Device 01a3
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 64 (500ns min, 1000ns max)
- Interrupt: pin B routed to IRQ 18
- Region 0: Memory at dfcfe800 (32-bit, non-prefetchable) [size=2K]
- Capabilities: [dc] Power Management version 2
- Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME+
- Kernel driver in use: ohci1394
- 02:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17) (prog-if 01)
- Subsystem: Dell Device 01a3
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 64
- Interrupt: pin C routed to IRQ 17
- Region 0: Memory at dfcfe700 (32-bit, non-prefetchable) [size=256]
- Capabilities: [80] Power Management version 2
- Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
- Kernel driver in use: sdhci-pci
- 02:03.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
- Subsystem: Intel Corporation Dell B130 laptop integrated WLAN
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 64 (750ns min, 6000ns max), Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 17
- Region 0: Memory at dfcff000 (32-bit, non-prefetchable) [size=4K]
- Capabilities: [dc] Power Management version 2
- Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
- Kernel driver in use: ipw2200
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement