U-Boot SPL 2013.04-07318-gac89cee (Jun 18 2013 - 03:19:09)
Board: A13-OLinuXinoM
DRAM: 256MB
CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
SUNXI SD/MMC: 0
U-Boot 2013.04-07318-gac89cee (Jun 18 2013 - 03:19:09) Allwinner Technology

CPU: Allwinner A13/A10s (SUN5I)
Board: A13-OLinuXinoM
I2C: ready
DRAM: 256 MiB
MMC: SUNXI SD/MMC: 0

...

<6>Booting Linux on physical CPU 0
<6>Initializing cgroup subsys cpuset
<5>Linux version 3.4.43 (root@minti7) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-1ubuntu1) ) #1 PREEMPT Tue Jun 18 14:12:26 CEST 2013
CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: sun5i
<3>MALI: not enough memory in first bank to make reserve.
<4>Ignoring unrecognised tag 0x00000000
<4>Malformed early option 'loglevel'
<6>Memory Reserved:
<6>     SYS  : 0x43000000 - 0x4300ffff  (  64 kB)
<6>     VE   : 0x44000000 - 0x48ffffff  (  80 MB)
<6>     LCD  : 0x49000000 - 0x4affffff  (  32 MB)
Memory policy: ECC disabled, Data cache writeback
<6>chip-id: Unknown (AW1625)
<7>On node 0 totalpages: 65536
<7>free_area_init_node: node 0, pgdat c078a810, node_mem_map c0842000
<7>  Normal zone: 512 pages used for memmap
<7>  Normal zone: 0 pages reserved
<7>  Normal zone: 65024 pages, LIFO batch:15
<7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768<c>
<7>pcpu-alloc: <c>[0] <c>0 <c>
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
<5>Kernel command line: console= root= loglevel=
<6>PID hash table entries: 1024 (order: 0, 4096 bytes)
<6>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>Memory: 256MB = 256MB total
<5>Memory: 136640k/136640k available, 125504k reserved, 0K highmem
<5>Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc07078d4   (7167 kB)
      .init : 0xc0708000 - 0xc0732000   ( 168 kB)
      .data : 0xc0732000 - 0xc07921d8   ( 385 kB)
       .bss : 0xc07921fc - 0xc0841b60   ( 703 kB)
<6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
<6>NR_IRQS:128
<6>timer0: Periodic Mode
<6>sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
<6>Console: colour dummy device 80x30
<6>Calibrating delay loop... <c>1001.88 BogoMIPS (lpj=5009408)
<6>pid_max: default: 32768 minimum: 301
<6>Mount-cache hash table entries: 512
<6>Initializing cgroup subsys cpuacct
<6>Initializing cgroup subsys devices
<6>Initializing cgroup subsys freezer
<6>Initializing cgroup subsys blkio
<6>CPU: Testing write buffer coherency: ok
<6>hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
<6>Setting up static identity map for 0x404d3b28 - 0x404d3b80
<6>devtmpfs: initialized
<6>dummy:
<6>NET: Registered protocol family 16
<6>hw-breakpoint: debug architecture 0x4 unsupported.
<6>Init eGon pin module V2.0
SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
<6>Initialize DMAC OK
<6>bio: create slab <bio-0> at 0
<5>SCSI subsystem initialized
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>Advanced Linux Sound Architecture Driver Version 1.0.25.
<6>cfg80211: Calling CRDA to update world regulatory domain
<6>Switching to clocksource aw 64bits couter
<5>FS-Cache: Loaded
<6>CacheFiles: Loaded
[usb_manager]: CONFIG_USB_SW_SUN5I_USB0_HOST_ONLY
[sw_hcd0]: usb host driver initialize........
[sw_hcd0]: [sw_hcd_host0]: open_usb_clock
[hcd0]: open, 0x60(0xc141), 0xcc(0x143)
[sw_hcd0]: host_init_state = 0
[sw_hcd0]: platform is usb host
[sw_hcd0]: sw_hcd_host0: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx (X), HB-ISO Tx (X), SoftConn)
[sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 38
<6>sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
<6>sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 1 port detected
[sw_hcd_host0]: Set USB Power ON
axp driver uning configuration failed(562)
axp driver uning configuration failed(574)
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>TCP established hash table entries: 8192 (order: 4, 65536 bytes)
<6>TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
<6>TCP: Hash tables configured (established 8192 bind 8192)
<6>TCP: reno registered
<6>UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>NET: Registered protocol family 1
<6>RPC: Registered named UNIX socket transport module.
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>audit: initializing netlink socket (disabled)
<5>type=2000 audit(0.279:1): initialized
<5>VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>NTFS driver 2.1.30 [Flags: R/W].
<6>fuse init (API version 7.18)
<6>msgmni has been set to 266
<6>alg: No test for stdrng (krng)
<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
<6>io scheduler noop registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<6>sunxi disp driver loaded (/dev/disp api 1.0)
<6>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<3>[uart]: failed to get uart2's used information
<3>[uart]: failed to get uart3's used information
<6>[uart]: used uart info.: 0x02
<6>[uart]: serial probe 1 irq 2 mapbase 0x01c28400
<6>sunxi-uart.1: ttyS0 at MMIO 0x1c28400 (irq = 2) is a U6_16550A
<6>brd: module loaded
<6>loop: module loaded
<6>'Low Performance USB Block' driver is deprecated. Please switch to usb-storage
<6>usbcore: registered new interface driver ub
[NAND]nand driver, init.
cmu_clk is 408
nand clk init end
offset 0xc:  0xe141
offset 0x14:  0x8200000a
[NAND] nand gpio_request
[NAND] nand driver version: 0x2 0x9
nand interrupte register ok
ret of NFC_ChangMode is 0
dma_hdle  is 0
dma_hdle  is 10000008
[SCAN_ERR] search nand physical architecture parameter failed!
[NAND]init_blklayer fail
[spi]: sw spi init !!
[spi]: sw spi init fetch spi0 uning configuration failed
[spi]: Get spi devices number failed
[spi]: register spi devices board info failed
<4>spi: cannot find any using configuration for                     all 4 spi controllers, return directly!
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[sw-ehci1]: open clock
[sw-ehci1]: Set USB Power ON
<6>sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
<6>sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
<6>sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
<6>sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 1 port detected
[sw-ohci1]: open clock
<6>sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
<6>sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
<6>sw-ohci sw-ohci.1: irq 64, io mem 0xf1c14400
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 1 port detected
<6>Initializing USB Mass Storage driver...
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<6>usbcore: registered new interface driver ums-alauda
<6>usbcore: registered new interface driver ums-cypress
<6>usbcore: registered new interface driver ums-datafab
<6>usbcore: registered new interface driver ums_eneub6250
<6>usbcore: registered new interface driver ums-freecom
<6>usbcore: registered new interface driver ums-isd200
<6>usbcore: registered new interface driver ums-jumpshot
<6>usbcore: registered new interface driver ums-karma
<6>usbcore: registered new interface driver ums-onetouch
<6>usbcore: registered new interface driver ums-realtek
<6>usbcore: registered new interface driver ums-sddr09
<6>usbcore: registered new interface driver ums-sddr55
<6>usbcore: registered new interface driver ums-usbat
<6>mousedev: PS/2 mouse device common for all mice
========RTC Inital ===================
rtc_fetch_sysconfig_para: after: rtc_twi_addr is 0x51, dirty_addr_buf: 0x51. dirty_addr_buf[1]: 0xfffe
rtc_fetch_sysconfig_para: rtc_twi_id is 1.
rtc_fetch_sysconfig_para:ok
pcf8563_init: after fetch_sysconfig_para:  normal_i2c: 0x51. normal_i2c[1]: 0xfffe
<6>i2c /dev entries driver
!!! base_Addr = 0xf1c2ac00
config i2c gpio with gpio_config api
twi0, apb clock = 24000000
START can't sendout!
Retrying transmission 2
START can't sendout!
Retrying transmission 1
START can't sendout!
Retrying transmission 0
<3>axp_mfd 0-0034: failed reading at 0x03
[AXP20-MFD] try to read chip id failed!
<4>axp_mfd: probe of 0-0034 failed with error -121
rtc_detect,line:157,twi_id:1,adapter->nr:0
rtc_detect,line:166
<6>I2C: i2c-0: AW16XX I2C adapter
!!! base_Addr = 0xf1c2b000
twi1, apb clock = 24000000
rtc_detect,line:157,twi_id:1,adapter->nr:1
<6>rtc_detect: Detected chip pcf8563 at adapter 1, address 0x51
rtc_detect,line:162
pcf8563_probe,line:657
<6>pcf8563 1-0051: chip found, driver version 0.4.3
START can't sendout!
Retrying transmission 2
START can't sendout!
Retrying transmission 1
START can't sendout!
Retrying transmission 0
<3>pcf8563 1-0051: pcf8563_get_datetime: read error,ret:-121
<6>pcf8563 1-0051: rtc core: registered pcf8563 as rtc0
<6>I2C: i2c-1: AW16XX I2C adapter
!!! base_Addr = 0xf1c2b400
twi2, apb clock = 24000000
rtc_detect,line:157,twi_id:1,adapter->nr:2
rtc_detect,line:166
<6>I2C: i2c-2: AW16XX I2C adapter
<6>lirc_dev: IR Remote Control driver registered, major 251
<6>IR NEC protocol handler initialized
<6>IR RC5(x) protocol handler initialized
<6>IR RC6 protocol handler initialized
<6>IR JVC protocol handler initialized
<6>IR Sony protocol handler initialized
<6>IR RC5 (streamzap) protocol handler initialized
<6>IR SANYO protocol handler initialized
<6>IR MCE Keyboard/mouse protocol handler initialized
<6>IR LIRC bridge handler initialized
[cedar dev]: install start!!!
[cedar dev]: install end!!!
[pa_drv] start!!!
[pa_drv] init end!!!
<6>platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral
<6>platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral
<6>platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral
<6>platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral
<6>platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral
<6>platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral
<6>md: linear personality registered for level -1
<6>md: multipath personality registered for level -4
<6>md: faulty personality registered for level -5
<6>device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<6>device-mapper: multipath: version 1.3.0 loaded
<6>device-mapper: multipath round-robin: version 1.0.0 loaded
<6>device-mapper: multipath queue-length: version 0.1.0 loaded
<6>device-mapper: multipath service-time: version 0.2.0 loaded
[mmc_pm]: no sdio card used in configuration
[mmc]: sunximmc_init
[mmc]: sunxi mmc controller using config : 0x1
[mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
[mmc]: mmc 0 power off !!
[mmc]: mmc0 Probe: base:0xf1c0f000 irq:32 dma:0 pdes:0xcf9b4000, ret 0.
<6>sunxi_leds driver init
<6>sunxi leds can't find script data '[leds_para]' 'leds_used'
<6>usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
enter sun4i Audio codec!!!
<6>sun4i audio support initialized
sun4i Audio codec successfully loaded..
<6>IPv4 over IPv4 tunneling driver
<6>TCP: cubic registered
<6>Initializing XFRM netlink socket
<6>NET: Registered protocol family 17
<6>NET: Registered protocol family 15
<6>8021q: 802.1Q VLAN Support v1.8
<6>VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
<5>Registering SWP/SWPB emulation handler
<6>registered taskstats version 1
<1>Unable to handle kernel NULL pointer dereference at virtual address 00000018
<1>pgd = c0004000
<1>[00000018] *pgd=00000000
<0>Internal error: Oops: 5 [#1] PREEMPT ARM
<d>Modules linked in:
CPU: 0    Not tainted  (3.4.43 #1)
PC is at mutex_lock+0x4/0x3c
LR is at axp_clr_bits+0x24/0xb0
pc : [<c04d205c>]    lr : [<c035fbb0>]    psr: a0000013
sp : cf827da0  ip : 00000008  fp : 00000004
r10: 00000001  r9 : 00000006  r8 : 00000092
r7 : 00000092  r6 : 00000018  r5 : 00000000  r4 : cf827df8
r3 : c083c3f4  r2 : 00000000  r1 : 00000092  r0 : 00000018
Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 10c5387d  Table: 40004019  DAC: 00000015

PC: 0xc04d1fdc:
1fdc  e1943f9f e1842f95 e3320000 1afffffb e3530001 1afffff0 e99d000c e5823004
1ffc  e5832000 e5943004 e15a0003 03a03000 05843000 e3a00001 ebedefeb e5963000
201c  e3130002 1a00000a e3a00001 ebedefe6 e5963000 e3130002 1a000003 e28dd014
203c  e8bd85f0 eb000324 eaffffe1 eb000322 eafffff9 eb000320 eafffff2 e3a02000
205c  e1901f9f e180cf92 e33c0000 1afffffb e3510001 012fff1e e3e02000 e1901f9f
207c  e180cf92 e33c0000 1afffffb e3510001 012fff1e eaffffa9 e92d47f0 e24dd008
209c  e1a08000 e3a09001 e1a0300d e3c3ad7f e3caa03f e59f30ac e59a200c e5803020
20bc  e5802048 ea000004 e59a300c e5933004 e5933000 e3130001 1a000019 e59a300c

LR: 0xc035fb30:
fb30  e1a00005 e1a02008 ebffcb79 e2504000 ba000009 e3a04000 e1a00006 eb05c8f2
fb50  e1a00004 e8bd8ff8 e28b0020 e1a02009 e59f101c ebfd40ab eafffff6 e2850020
fb70  e1a02008 e1a03009 e59f1008 ebfd40a5 eafffff0 c06948d8 c06949e8 e92d47f0
fb90  e1a08001 e1a09002 ebfd4b65 e6ef7078 e2806018 e1a05000 e1a00006 eb05c929
fbb0  e595a000 e1a01007 e1a0000a ebffcb6a e2504000 ba000015 e1190004 1a000004
fbd0  e3a04000 e1a00006 eb05c8cf e1a00004 e8bd87f0 e1c49009 e5955000 e1a01007
fbf0  e6ef9079 e1a00005 e1a02009 ebffcb48 e2504000 aafffff1 e2850020 e1a02009
fc10  e1a03008 e59f1018 ebfd407e eaffffec e28a0020 e1a02008 e59f1008 ebfd4079

SP: 0xcf827d20:
7d20  00000000 c078b0d4 c073a958 00000000 00000000 c008d6f4 00000000 00000041
7d40  c04d205c a0000013 ffffffff cf827d8c 00000092 c000e698 00000018 00000092
7d60  00000000 c083c3f4 cf827df8 00000000 00000018 00000092 00000092 00000006
7d80  00000001 00000004 00000008 cf827da0 c035fbb0 c04d205c a0000013 ffffffff
7da0  cf827df8 00000001 00000002 cf827e68 00000001 00000a68 00000001 c026f820
7dc0  cf827de0 00000001 00000002 cf827e68 00000001 cf827de0 00000001 c0281198
7de0  00000001 3064636c 7261705f cf810061 cf8130d8 c067af80 5f64636c 655f6c62
7e00  0000006e 00000000 00000000 00000000 00000000 00000000 0000ffff 00000001

R3: 0xc083c374:
c374  c077fd28 c077fd38 c077fd48 c077fd58 c077fd68 c077fd78 c077fd88 c077fd98
c394  c077fda8 c077fdb8 c077fdc8 c077fdd8 c077fde8 c077fdf8 c077fe08 c077fe18
c3b4  c077fe28 c077fe38 c077fe48 c077fe58 c077fe68 c077fe78 c077fe88 c077fe98
c3d4  c077fea8 c077feb8 c077fec8 c077fed8 c077fee8 c077fef8 c077ff08 00000000
c3f4  cf985b00 00000000 00000000 00000001 00000000 00000000 00000034 000000c8
c414  00000a28 000493e0 000f4240 000493e0 000f4240 00401640 0000000f 00000001
c434  00000064 00000064 00000032 000002d0 00000000 00000000 00000001 00000005
c454  00000007 0000000d 00000010 0000001a 00000024 0000002e 00000035 0000003d

R4: 0xcf827d78:
7d78  00000092 00000006 00000001 00000004 00000008 cf827da0 c035fbb0 c04d205c
7d98  a0000013 ffffffff cf827df8 00000001 00000002 cf827e68 00000001 00000a68
7db8  00000001 c026f820 cf827de0 00000001 00000002 cf827e68 00000001 cf827de0
7dd8  00000001 c0281198 00000001 3064636c 7261705f cf810061 cf8130d8 c067af80
7df8  5f64636c 655f6c62 0000006e 00000000 00000000 00000000 00000000 00000000
7e18  0000ffff 00000001 00000001 00000000 ffffffff 00000000 00000001 c0835820
7e38  ffffffff c027ab58 00000000 f1c20c00 f1c0d000 00000000 f1c0c000 f1e20000
7e58  f1c01000 f1e00000 f1c20800 c02696fc f1e60000 f1e40000 f1e00000 f1e20000
<0>Process swapper (pid: 1, stack limit = 0xcf8262e8)
<0>Stack: (0xcf827da0 to 0xcf828000)
<0>7da0: cf827df8 00000001 00000002 cf827e68 00000001 00000a68 00000001 c026f820
<0>7dc0: cf827de0 00000001 00000002 cf827e68 00000001 cf827de0 00000001 c0281198
<0>7de0: 00000001 3064636c 7261705f cf810061 cf8130d8 c067af80 5f64636c 655f6c62
<0>7e00: 0000006e 00000000 00000000 00000000 00000000 00000000 0000ffff 00000001
<0>7e20: 00000001 00000000 ffffffff 00000000 00000001 c0835820 ffffffff c027ab58
<0>7e40: 00000000 f1c20c00 f1c0d000 00000000 f1c0c000 f1e20000 f1c01000 f1e00000
<0>7e60: f1c20800 c02696fc f1e60000 f1e40000 f1e00000 f1e20000 f1c0c000 f1c0d000
<0>7e80: f1c0a000 f1c1b000 f1c20800 f1c01000 f1c20000 f1c20c00 f1e70000 00000000
<0>7ea0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<0>7ec0: 00000000 c026dcfc c02b3c98 c0836970 00000000 c0678880 c0792200 c0757c78
<0>7ee0: c071c614 cf826000 c078c8f8 c026e46c 00000000 00000000 39343214 c000303a
<0>7f00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<0>7f20: 00000000 00000000 00000000 00000000 00000000 00000000 c0678880 c0836970
<0>7f40: 00000000 c0678880 c0792200 0000009e c071c614 cf826000 00000000 c071c700
<0>7f60: c0678880 0d62b9af c07313c0 00000007 c072b3b0 c0008640 0000009e c00450c4
<0>7f80: cf827fac 00000000 c06dffe0 c06382d8 00000007 00000007 00000000 c07313c0
<0>7fa0: 00000007 c072b3b0 c0792200 0000009e c072b3b8 c0708220 00000000 c07088cc
<0>7fc0: 00000007 00000007 c0708220 00000013 00000000 00000000 00000000 c0708790
<0>7fe0: c000fbec 00000013 00000000 00000000 00000000 c000fbec ffff7fab befff71d
[<c04d205c>] (mutex_lock+0x4/0x3c) from [<c035fbb0>] (axp_clr_bits+0x24/0xb0)
[<c035fbb0>] (axp_clr_bits+0x24/0xb0) from [<c026f820>] (OSAL_GPIO_Request+0x64/0xb0)
[<c026f820>] (OSAL_GPIO_Request+0x64/0xb0) from [<c0281198>] (BSP_disp_close_lcd_backlight+0xd8/0x1c8)
[<c0281198>] (BSP_disp_close_lcd_backlight+0xd8/0x1c8) from [<c027ab58>] (BSP_disp_init+0x114/0x160)
[<c027ab58>] (BSP_disp_init+0x114/0x160) from [<c02696fc>] (DRV_DISP_Init+0xe8/0xfc)
[<c02696fc>] (DRV_DISP_Init+0xe8/0xfc) from [<c026e46c>] (Fb_Init+0x294/0xe28)
[<c026e46c>] (Fb_Init+0x294/0xe28) from [<c071c700>] (lcd_module_init+0xec/0x114)
[<c071c700>] (lcd_module_init+0xec/0x114) from [<c0008640>] (do_one_initcall+0x10c/0x170)
[<c0008640>] (do_one_initcall+0x10c/0x170) from [<c07088cc>] (kernel_init+0x13c/0x1fc)
[<c07088cc>] (kernel_init+0x13c/0x1fc) from [<c000fbec>] (kernel_thread_exit+0x0/0x8)
<0>Code: eafffff9 eb000320 eafffff2 e3a02000 (e1901f9f)
<4>---[ end trace 8f35edd0e6b85d3e ]---
<0>Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

[mmc]: mmc 0 detect change, present 1