Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RELEASE #0 r243826: Tue Dec  4 06:55:39 UTC 2012
    [email protected]:/usr/obj/usr/src/sys/GENERIC i386
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ (2913.49-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x60fb2  Family = f  Model = 6b  Stepping = 2
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
real memory  = 2147483648 (2048 MB)
avail memory = 1940770816 (1850 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <Nvidia AWRDACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110527/tbfadt-586)
ioapic0: Changing APIC ID to 4
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <Nvidia AWRDACPI> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 77de0000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfeff0000-0xfeff03ff irq 0,8 on acpi0
device_attach: hpet0 attach returned 12
atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: Length mismatch for 4 range: 81 vs 7f
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x1d00-0x1dff at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
ohci0: <nVidia nForce MCP61 USB Controller> mem 0xfe02f000-0xfe02ffff irq 21 at device 2.0 on pci0
usbus0 on ohci0
ehci0: <NVIDIA nForce MCP61 USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq 22 at device 2.1 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
hdac0: <NVIDIA MCP61 HDA Controller> mem 0xfe024000-0xfe027fff irq 20 at device 5.0 on pci0
atapci0: <nVidia nForce MCP61 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
nfe0: <NVIDIA nForce MCP61 Networking Adapter> port 0xec00-0xec07 mem 0xfe02d000-0xfe02dfff irq 21 at device 7.0 on pci0
miibus0: <MII bus> on nfe0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
nfe0: Ethernet address: 00:21:97:ee:cd:36
atapci1: <nVidia nForce MCP61 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xd800-0xd80f mem 0xfe02c000-0xfe02cfff irq 23 at device 8.0 on pci0
ata2: <ATA channel> at channel 0 on atapci1
ata3: <ATA channel> at channel 1 on atapci1
atapci2: <nVidia nForce MCP61 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc400-0xc40f mem 0xfe02b000-0xfe02bfff irq 23 at device 8.1 on pci0
ata4: <ATA channel> at channel 0 on atapci2
ata5: <ATA channel> at channel 1 on atapci2
pcib2: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci4: <ACPI PCI bus> on pcib4
vgapci0: <VGA-compatible display> mem 0xfb000000-0xfbffffff,0xe0000000-0xefffffff,0xfc000000-0xfcffffff irq 22 at device 13.0 on pci0
nvidia0: <GeForce 6150SE nForce 430> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
acpi_tz0: <Thermal Zone> on acpi0
ACPI Warning: For \\_TZ_.THRM._PSL: Return Package has no elements (empty) (20110527/nspredef-500)
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ctl: CAM Target Layer loaded
powernow0: <PowerNow! K8> on cpu0
powernow1: <PowerNow! K8> on cpu1
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC662 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC662 (Rear Analog)> at nid 20 and 24,26 on hdaa0
pcm1: <Realtek ALC662 (Front Analog)> at nid 27 and 25 on hdaa0
pcm2: <Realtek ALC662 (Rear Digital)> at nid 30 on hdaa0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <nVidia> at usbus0
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <nVidia> at usbus1
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 10 ports with 10 removable, self powered
ada0 at ata3 bus 0 scbus3 target 0 lun 0
ada0: <WDC WD1600AAJS-61WAA0 58.01D58> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
cd0 at ata2 bus 0 scbus2 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GH20NS15 IL00> Removable CD-ROM SCSI-0 device
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: cd present [2295104 x 2048 byte records]
ada0: 152627MB (312581808 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad6
SMP: AP CPU #1 Launched!
uhub1: 10 ports with 10 removable, self powered
Root mount waiting for: usbus1
ugen0.2: <vendor 0x0e6a> at usbus0
ukbd0: <HID Keyboard Device> on usbus0
kbd2 at ukbd0
ugen1.2: <Generic> at usbus1
umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.29, addr 2> on usbus1
umass0:  SCSI over Bulk-Only; quirks = 0x4001
umass0:7:0:-1: Attached to scbus7
Trying to mount root from ufs:/dev/ada0s1a [rw]...
da0 at umass-sim0 bus 0 scbus7 target 0 lun 0
da0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
uhid0: <HID Keyboard Hot Keys> on usbus0
da1 at umass-sim0 bus 0 scbus7 target 0 lun 1
da1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da2 at umass-sim0 bus 0 scbus7 target 0 lun 2
da2: <Generic USB SM Reader 1.02> Removable Direct Access SCSI-0 device
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim0 bus 0 scbus7 target 0 lun 3
da3: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.19
ugen0.3: <HOLTEK> at usbus0
ukbd1: <HOLTEK USB Keyboard, class 0/0, rev 1.10/1.00, addr 3> on usbus0
kbd3 at ukbd1
ums0: <HOLTEK USB Keyboard, class 0/0, rev 1.10/1.00, addr 3> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=1
ums0: 3 buttons and [XYZ] coordinates ID=4
ugen0.3: <HOLTEK> at usbus0 (disconnected)
ukbd1: at uhub0, port 4, addr 3 (disconnected)
ums0: at uhub0, port 4, addr 3 (disconnected)
ugen0.3: <HOLTEK> at usbus0
ukbd1: <HOLTEK USB Keyboard, class 0/0, rev 1.10/1.00, addr 3> on usbus0
kbd3 at ukbd1
ums0: <HOLTEK USB Keyboard, class 0/0, rev 1.10/1.00, addr 3> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=1
ums0: 3 buttons and [XYZ] coordinates ID=4
kern.maxfiles limit exceeded by uid 1001, please see tuning(7).
ugen1.3: <Kingston> at usbus1
umass1: <Kingston DT 101 G2, class 0/0, rev 2.00/1.00, addr 3> on usbus1
umass1:  SCSI over Bulk-Only; quirks = 0x4100
umass1:8:1:-1: Attached to scbus8
da4 at umass-sim1 bus 1 scbus8 target 0 lun 0
da4: <Kingston DT 101 G2 PMAP> Removable Direct Access SCSI-0 device
da4: 40.000MB/s transfers
da4: 7441MB (15240576 512 byte sectors: 255H 63S/T 948C)
pid 1667 (gvfs-hal-volume-mon), uid 1001: exited on signal 11
pid 1993 (gvfs-hal-volume-mon), uid 1001: exited on signal 11