Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 443.316]
- X.Org X Server 1.16.4
- Release Date: 2014-12-20
- [ 443.316] X Protocol Version 11, Revision 0
- [ 443.316] Build Operating System: Linux 4.0.5-gentoo x86_64 Gentoo
- [ 443.316] Current Operating System: Linux NiTr0 4.0.5-gentoo #4 SMP Fri Aug 21 20:49:20 EEST 2015 x86_64
- [ 443.316] Kernel command line: root=/dev/sda5
- [ 443.316] Build Date: 19 August 2015 08:14:26PM
- [ 443.316]
- [ 443.316] Current version of pixman: 0.32.6
- [ 443.316] Before reporting problems, check http://wiki.x.org
- to make sure that you have the latest version.
- [ 443.316] Markers: (--) probed, (**) from config file, (==) default setting,
- (++) from command line, (!!) notice, (II) informational,
- (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
- [ 443.316] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 27 19:02:40 2015
- [ 443.337] (==) Using config file: "/etc/X11/xorg.conf"
- [ 443.337] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
- [ 443.361] (==) ServerLayout "X.org Configured"
- [ 443.361] (**) |-->Screen "Screen0" (0)
- [ 443.361] (**) | |-->Monitor "Monitor0"
- [ 443.361] (**) | |-->Device "Card0"
- [ 443.361] (**) |-->Input Device "Mouse0"
- [ 443.361] (**) |-->Input Device "Keyboard0"
- [ 443.361] (==) Automatically adding devices
- [ 443.361] (==) Automatically enabling devices
- [ 443.361] (==) Automatically adding GPU devices
- [ 443.411] (**) FontPath set to:
- /usr/share/fonts/misc/,
- /usr/share/fonts/TTF/,
- /usr/share/fonts/OTF/,
- /usr/share/fonts/Type1/,
- /usr/share/fonts/100dpi/,
- /usr/share/fonts/75dpi/,
- /usr/share/fonts/misc/,
- /usr/share/fonts/TTF/,
- /usr/share/fonts/OTF/,
- /usr/share/fonts/Type1/,
- /usr/share/fonts/100dpi/,
- /usr/share/fonts/75dpi/
- [ 443.411] (**) ModulePath set to "/usr/lib64/xorg/modules"
- [ 443.411] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
- [ 443.411] (WW) Disabling Mouse0
- [ 443.411] (WW) Disabling Keyboard0
- [ 443.411] (II) Loader magic: 0x806c80
- [ 443.411] (II) Module ABI versions:
- [ 443.411] X.Org ANSI C Emulation: 0.4
- [ 443.411] X.Org Video Driver: 18.0
- [ 443.411] X.Org XInput driver : 21.0
- [ 443.411] X.Org Server Extension : 8.0
- [ 443.414] (--) PCI:*(0:3:0:0) 102b:0522:8086:0101 rev 2, Mem @ 0xb0000000/16777216, 0xb1800000/16384, 0xb1000000/8388608, BIOS @ 0x????????/65536
- [ 443.414] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
- [ 443.414] (II) LoadModule: "glx"
- [ 443.441] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
- [ 443.587] (II) Module glx: vendor="X.Org Foundation"
- [ 443.587] compiled for 1.16.4, module version = 1.0.0
- [ 443.588] ABI class: X.Org Server Extension, version 8.0
- [ 443.588] (==) AIGLX enabled
- [ 443.588] (II) LoadModule: "mga"
- [ 443.588] (II) Loading /usr/lib64/xorg/modules/drivers/mga_drv.so
- [ 443.598] (II) Module mga: vendor="X.Org Foundation"
- [ 443.598] compiled for 1.16.4, module version = 1.6.3
- [ 443.598] Module class: X.Org Video Driver
- [ 443.598] ABI class: X.Org Video Driver, version 18.0
- [ 443.598] (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
- mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI,
- mgag200 SE A PCI, mgag200 SE B PCI, mgag200 EV Maxim,
- mgag200 ER SH7757, mgag200 eW Nuvoton, mgag200eH, mgag400, mgag550
- [ 443.598] (++) using VT number 7
- [ 443.609] (II) Loading sub module "vgahw"
- [ 443.609] (II) LoadModule: "vgahw"
- [ 443.609] (II) Loading /usr/lib64/xorg/modules/libvgahw.so
- [ 443.617] (II) Module vgahw: vendor="X.Org Foundation"
- [ 443.618] compiled for 1.16.4, module version = 0.1.0
- [ 443.618] ABI class: X.Org Video Driver, version 18.0
- [ 443.618] (--) MGA(0): Chipset: "mgag200 SE A PCI"
- [ 443.618] (II) MGA(0): HW cursor is not supported with video redirection onG200 server chips.
- If you don't intend to use video redirection enable with Option "HWCursor" "On"
- [ 443.618] xf86TokenToOptinfo: table is NULL
- [ 443.618] xf86TokenToOptinfo: table is NULL
- [ 443.618] (==) MGA(0): Using SW cursor
- [ 443.618] (--) MGA(0): Linear framebuffer at 0xB0000000
- [ 443.618] (--) MGA(0): MMIO registers at 0xB1800000
- [ 443.618] (--) MGA(0): Pseudo-DMA transfer window at 0xB1000000
- [ 443.618] (II) MGA(0): MAPPED Framebuffer B0000000 400000 to 7FBC15C9F000.
- [ 443.618] (II) MGA(0): UNMAPPING framebuffer 0x7FBC15C9F000, 0x400000.
- [ 443.618] (II) MGA(0): MAPPED Framebuffer B0000000 1000000 to 7FBC1509F000.
- [ 443.693] (II) MGA(0): UNMAPPING framebuffer 0x7FBC1509F000, 0x1000000.
- [ 443.693] (==) MGA(0): Depth 24, (--) framebuffer bpp 32
- [ 443.858] (==) MGA(0): RGB weight 888
- [ 443.858] (II) MGA(0): Disabling MTRR support.
- [ 443.858] (==) MGA(0): Using AGP 1x mode
- [ 443.858] (==) MGA(0): Using XAA acceleration
- [ 443.859] (--) MGA(0): Video BIOS info block at offset 0x07AE0
- [ 443.859] (==) MGA(0): VideoRAM: 8128 kByte
- [ 443.859] (II) Loading sub module "ddc"
- [ 443.859] (II) LoadModule: "ddc"
- [ 443.859] (II) Module "ddc" already built-in
- [ 443.859] (II) Loading sub module "i2c"
- [ 443.859] (II) LoadModule: "i2c"
- [ 443.859] (II) Module "i2c" already built-in
- [ 443.859] (II) MGA(0): MAPPED Framebuffer B0000000 7f0000 to 7FBC158AF000.
- [ 443.859] (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
- [ 444.220] (II) MGA(0): I2C bus "DDC P1" initialized.
- [ 444.220] (II) MGA(0): I2C device "DDC P1:ddc2" registered at address 0xA0.
- [ 444.228] (--) MGA(0): No DDC signal
- [ 444.228] (II) Loading sub module "vbe"
- [ 444.228] (II) LoadModule: "vbe"
- [ 444.228] (II) Loading /usr/lib64/xorg/modules/libvbe.so
- [ 444.252] (II) Module vbe: vendor="X.Org Foundation"
- [ 444.252] compiled for 1.16.4, module version = 1.1.0
- [ 444.252] ABI class: X.Org Video Driver, version 18.0
- [ 444.252] (II) Loading sub module "int10"
- [ 444.252] (II) LoadModule: "int10"
- [ 444.253] (II) Loading /usr/lib64/xorg/modules/libint10.so
- [ 444.308] (II) Module int10: vendor="X.Org Foundation"
- [ 444.308] compiled for 1.16.4, module version = 1.0.0
- [ 444.308] ABI class: X.Org Video Driver, version 18.0
- [ 444.308] (II) MGA(0): initializing int10
- [ 444.311] (II) MGA(0): Primary V_BIOS segment is: 0xc000
- [ 444.311] (II) MGA(0): VESA BIOS detected
- [ 444.311] (II) MGA(0): VESA VBE Version 3.0
- [ 444.311] (II) MGA(0): VESA VBE Total Mem: 8128 kB
- [ 444.311] (II) MGA(0): VESA VBE OEM: Matrox Graphics Inc.
- [ 444.311] (II) MGA(0): VESA VBE OEM Software Rev: 3.8
- [ 444.311] (II) MGA(0): VESA VBE OEM Vendor: Matrox
- [ 444.311] (II) MGA(0): VESA VBE OEM Product: MGA-G200
- [ 444.311] (II) MGA(0): VESA VBE OEM Product Rev: 00
- [ 444.386] (II) MGA(0): VESA VBE DDC supported
- [ 444.386] (II) MGA(0): VESA VBE DDC Level none
- [ 444.386] (II) MGA(0): VESA VBE DDC transfer in appr. 0 sec.
- [ 444.460] (II) MGA(0): VESA VBE DDC read failed
- [ 444.731] (II) MGA(0): UNMAPPING framebuffer 0x7FBC158AF000, 0x7F0000.
- [ 444.731] (==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
- [ 444.731] (==) MGA(0): Min pixel clock is 17 MHz
- [ 444.731] (--) MGA(0): Max pixel clock is 230 MHz
- [ 444.731] (II) MGA(0): Monitor0: Using hsync range of 31.50-48.00 kHz
- [ 444.731] (II) MGA(0): Monitor0: Using vrefresh range of 56.00-75.00 Hz
- [ 444.731] (II) MGA(0): Clock range: 17.75 to 230.00 MHz
- [ 444.731] (II) MGA(0): Not using default mode "640x350" (vrefresh out of range)
- [ 444.731] (II) MGA(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
- [ 444.731] (II) MGA(0): Not using default mode "640x400" (vrefresh out of range)
- [ 444.731] (II) MGA(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
- [ 444.731] (II) MGA(0): Not using default mode "720x400" (vrefresh out of range)
- [ 444.731] (II) MGA(0): Not using default mode "360x200" (vrefresh out of range)
- [ 444.731] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
- [ 444.731] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
- [ 444.731] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
- [ 444.731] (II) MGA(0): Not using default mode "640x480" (vrefresh out of range)
- [ 444.731] (II) MGA(0): Not using default mode "320x240" (vrefresh out of range)
- [ 444.731] (II) MGA(0): Not using default mode "800x600" (hsync out of range)
- [ 444.731] (II) MGA(0): Not using default mode "400x300" (hsync out of range)
- [ 444.731] (II) MGA(0): Not using default mode "1024x768i" (vrefresh out of range)
- [ 444.731] (II) MGA(0): Not using default mode "512x384i" (vrefresh out of range)
- [ 444.731] (II) MGA(0): Not using default mode "1024x768" (hsync out of range)
- [ 444.732] (II) MGA(0): Not using default mode "512x384" (hsync out of range)
- [ 444.732] (II) MGA(0): Not using default mode "1024x768" (hsync out of range)
- [ 444.732] (II) MGA(0): Not using default mode "512x384" (hsync out of range)
- [ 444.732] (II) MGA(0): Not using default mode "1024x768" (mode requires too much memory bandwidth)
- [ 444.732] (II) MGA(0): Not using default mode "512x384" (hsync out of range)
- [ 444.732] (II) MGA(0): Not using default mode "1152x864" (mode requires too much memory bandwidth)
- [ 444.732] (II) MGA(0): Not using default mode "576x432" (hsync out of range)
- [ 444.732] (II) MGA(0): Not using default mode "1280x960" (mode requires too much memory bandwidth)
- [ 444.732] (II) MGA(0): Not using default mode "640x480" (hsync out of range)
- [ 444.732] (II) MGA(0): Not using default mode "1280x960" (mode requires too much memory bandwidth)
- [ 444.732] (II) MGA(0): Not using default mode "640x480" (hsync out of range)
- [ 444.732] (II) MGA(0): Not using default mode "1280x1024" (mode requires too much memory bandwidth)
- [ 444.732] (II) MGA(0): Not using default mode "640x512" (hsync out of range)
- [ 444.732] (II) MGA(0): Not using default mode "1280x1024" (mode requires too much memory bandwidth)
- [ 444.732] (II) MGA(0): Not using default mode "640x512" (hsync out of range)
- [ 444.732] (II) MGA(0): Not using default mode "1280x1024" (mode requires too much memory bandwidth)
- [ 444.732] (II) MGA(0): Not using default mode "640x512" (hsync out of range)
- [ 444.732] (II) MGA(0): Not using default mode "1600x1200" (mode requires too much memory bandwidth)
- [ 444.732] (II) MGA(0): Not using default mode "800x600" (hsync out of range)
- [ 444.732] (II) MGA(0): Not using default mode "1600x1200" (mode requires too much memory bandwidth)
- [ 444.732] (II) MGA(0): Not using default mode "800x600" (hsync out of range)
- [ 444.732] (II) MGA(0): Not using default mode "1600x1200" (mode requires too much memory bandwidth)
- [ 444.732] (II) MGA(0): Not using default mode "800x600" (mode requires too much memory bandwidth)
- [ 444.732] (II) MGA(0): Not using default mode "1600x1200" (mode requires too much memory bandwidth)
- [ 444.732] (II) MGA(0): Not using default mode "800x600" (mode requires too much memory bandwidth)
- [ 444.732] (II) MGA(0): Not using default mode "1600x1200" (mode requires too much memory bandwidth)
- [ 444.732] (II) MGA(0): Not using default mode "800x600" (mode requires too much memory bandwidth)
- [ 444.732] (II) MGA(0): Not using default mode "1792x1344" (insufficient memory for mode)
- [ 444.732] (II) MGA(0): Not using default mode "896x672" (mode requires too much memory bandwidth)
- [ 444.732] (II) MGA(0): Not using default mode "1792x1344" (insufficient memory for mode)
- [ 444.732] (II) MGA(0): Not using default mode "896x672" (mode requires too much memory bandwidth)
- [ 444.732] (II) MGA(0): Not using default mode "1856x1392" (insufficient memory for mode)
- [ 444.732] (II) MGA(0): Not using default mode "928x696" (mode requires too much memory bandwidth)
- [ 444.732] (II) MGA(0): Not using default mode "1856x1392" (insufficient memory for mode)
- [ 444.732] (II) MGA(0): Not using default mode "928x696" (mode requires too much memory bandwidth)
- [ 444.732] (II) MGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
- [ 444.732] (II) MGA(0): Not using default mode "960x720" (mode requires too much memory bandwidth)
- [ 444.732] (II) MGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
- [ 444.732] (II) MGA(0): Not using default mode "960x720" (mode requires too much memory bandwidth)
- [ 444.732] (II) MGA(0): Not using default mode "832x624" (hsync out of range)
- [ 444.732] (II) MGA(0): Not using default mode "416x312" (hsync out of range)
- [ 444.732] (II) MGA(0): Not using default mode "1400x1050" (mode requires too much memory bandwidth)
- [ 444.732] (II) MGA(0): Not using default mode "700x525" (hsync out of range)
- [ 444.733] (II) MGA(0): Not using default mode "1400x1050" (mode requires too much memory bandwidth)
- [ 444.733] (II) MGA(0): Not using default mode "700x525" (hsync out of range)
- [ 444.733] (II) MGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
- [ 444.733] (II) MGA(0): Not using default mode "960x720" (mode requires too much memory bandwidth)
- [ 444.733] (II) MGA(0): Not using default mode "2048x1536" (insufficient memory for mode)
- [ 444.733] (II) MGA(0): Not using default mode "1024x768" (mode requires too much memory bandwidth)
- [ 444.733] (II) MGA(0): Not using default mode "2048x1536" (insufficient memory for mode)
- [ 444.733] (II) MGA(0): Not using default mode "1024x768" (mode requires too much memory bandwidth)
- [ 444.733] (II) MGA(0): Not using default mode "2048x1536" (insufficient memory for mode)
- [ 444.733] (II) MGA(0): Not using default mode "1024x768" (mode requires too much memory bandwidth)
- [ 444.733] (II) MGA(0): Not using mode "1280x1024" (no mode of this name)
- [ 444.733] (--) MGA(0): Has SDRAM
- [ 444.733] (--) MGA(0): Virtual size is 1024x768 (pitch 1024)
- [ 444.733] (**) MGA(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
- [ 444.733] (II) MGA(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz zd)
- [ 444.733] (**) MGA(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
- [ 444.733] (II) MGA(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz d)
- [ 444.733] (**) MGA(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
- [ 444.733] (II) MGA(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz d)
- [ 444.733] (**) MGA(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
- [ 444.733] (II) MGA(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
- [ 444.733] (**) MGA(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
- [ 444.733] (II) MGA(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
- [ 444.733] (**) MGA(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
- [ 444.733] (II) MGA(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz d)
- [ 444.733] (**) MGA(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
- [ 444.733] (II) MGA(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz d)
- [ 444.733] (**) MGA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
- [ 444.733] (II) MGA(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
- [ 444.733] (**) MGA(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
- [ 444.733] (II) MGA(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
- [ 444.733] (**) MGA(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
- [ 444.733] (II) MGA(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
- [ 444.733] (**) MGA(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
- [ 444.733] (II) MGA(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
- [ 444.733] (**) MGA(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
- [ 444.733] (II) MGA(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
- [ 444.733] (**) MGA(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
- [ 444.733] (II) MGA(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
- [ 444.733] (==) MGA(0): DPI set to (96, 96)
- [ 444.733] (II) MGA(0): YDstOrg is set to 0
- [ 444.733] (II) Loading sub module "fb"
- [ 444.733] (II) LoadModule: "fb"
- [ 444.733] (II) Loading /usr/lib64/xorg/modules/libfb.so
- [ 444.755] (II) Module fb: vendor="X.Org Foundation"
- [ 444.755] compiled for 1.16.4, module version = 1.0.0
- [ 444.755] ABI class: X.Org ANSI C Emulation, version 0.4
- [ 444.755] (--) Depth 24 pixmap format is 32 bpp
- [ 444.755] (II) MGA(0): MAPPED Framebuffer B0000000 1000000 to 7FBC13C85000.
- [ 444.755] (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
- [ 445.285] (--) MGA(0): 64 DWORD fifo
- [ 445.319] (II) MGA(0): Clock == 65000
- [ 445.319] (II) MGA(0): BitsPerPixel == 32
- [ 445.319] (II) MGA(0): HiPriLvl == 03
- [ 445.332] (==) MGA(0): Default visual is TrueColor
- [ 445.332] (WW) MGA(0): Not supported by hardware, not initializing the DRI
- [ 445.340] (II) MGA(0): Using -512 lines for offscreen memory.
- [ 445.340] (==) MGA(0): Backing store enabled
- [ 445.340] (==) MGA(0): Silken mouse enabled
- [ 445.341] (==) MGA(0): DPMS enabled
- [ 445.341] (WW) MGA(0): Direct rendering disabled
- [ 445.341] (WW) MGA(0): Option "MTRR" is not used
- [ 445.341] (==) RandR enabled
- [ 445.380] (II) AIGLX: Screen 0 is not DRI2 capable
- [ 445.380] (EE) AIGLX: reverting to software rendering
- [ 446.023] (II) AIGLX: Loaded and initialized swrast
- [ 446.023] (II) GLX: Initialized DRISWRAST GL provider for screen 0
- [ 447.681] (II) config/udev: Adding input device Power Button (/dev/input/event5)
- [ 447.681] (**) Power Button: Applying InputClass "evdev keyboard catchall"
- [ 447.681] (**) Power Button: Applying InputClass "system-keyboard"
- [ 447.681] (II) LoadModule: "evdev"
- [ 447.681] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
- [ 448.180] (II) Module evdev: vendor="X.Org Foundation"
- [ 448.180] compiled for 1.16.4, module version = 2.9.1
- [ 448.180] Module class: X.Org XInput Driver
- [ 448.180] ABI class: X.Org XInput driver, version 21.0
- [ 448.180] (II) Using input driver 'evdev' for 'Power Button'
- [ 448.180] (**) Power Button: always reports core events
- [ 448.180] (**) evdev: Power Button: Device: "/dev/input/event5"
- [ 448.180] (--) evdev: Power Button: Vendor 0 Product 0x1
- [ 448.180] (--) evdev: Power Button: Found keys
- [ 448.180] (II) evdev: Power Button: Configuring as keyboard
- [ 448.180] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
- [ 448.180] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
- [ 448.180] (**) Option "xkb_rules" "evdev"
- [ 448.180] (**) Option "xkb_model" "pc105"
- [ 448.180] (**) Option "xkb_layout" "us,ru,ua"
- [ 448.180] (**) Option "xkb_variant" ",winkeys,winkeys"
- [ 448.180] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:scroll"
- [ 448.261] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
- [ 448.261] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
- [ 448.261] (**) Sleep Button: Applying InputClass "system-keyboard"
- [ 448.262] (II) Using input driver 'evdev' for 'Sleep Button'
- [ 448.262] (**) Sleep Button: always reports core events
- [ 448.262] (**) evdev: Sleep Button: Device: "/dev/input/event4"
- [ 448.262] (--) evdev: Sleep Button: Vendor 0 Product 0x3
- [ 448.262] (--) evdev: Sleep Button: Found keys
- [ 448.262] (II) evdev: Sleep Button: Configuring as keyboard
- [ 448.262] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event4"
- [ 448.262] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
- [ 448.262] (**) Option "xkb_rules" "evdev"
- [ 448.262] (**) Option "xkb_model" "pc105"
- [ 448.262] (**) Option "xkb_layout" "us,ru,ua"
- [ 448.262] (**) Option "xkb_variant" ",winkeys,winkeys"
- [ 448.262] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:scroll"
- [ 448.263] (II) config/udev: Adding input device American Megatrends Inc. Virtual Keyboard and Mouse (/dev/input/event0)
- [ 448.263] (**) American Megatrends Inc. Virtual Keyboard and Mouse: Applying InputClass "evdev keyboard catchall"
- [ 448.263] (**) American Megatrends Inc. Virtual Keyboard and Mouse: Applying InputClass "system-keyboard"
- [ 448.263] (II) Using input driver 'evdev' for 'American Megatrends Inc. Virtual Keyboard and Mouse'
- [ 448.263] (**) American Megatrends Inc. Virtual Keyboard and Mouse: always reports core events
- [ 448.263] (**) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Device: "/dev/input/event0"
- [ 448.263] (--) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Vendor 0x46b Product 0xff10
- [ 448.263] (--) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Found keys
- [ 448.263] (II) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Configuring as keyboard
- [ 448.263] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:046B:FF10.0001/input/input0/event0"
- [ 448.263] (II) XINPUT: Adding extended input device "American Megatrends Inc. Virtual Keyboard and Mouse" (type: KEYBOARD, id 8)
- [ 448.263] (**) Option "xkb_rules" "evdev"
- [ 448.263] (**) Option "xkb_model" "pc105"
- [ 448.263] (**) Option "xkb_layout" "us,ru,ua"
- [ 448.263] (**) Option "xkb_variant" ",winkeys,winkeys"
- [ 448.263] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:scroll"
- [ 448.264] (II) config/udev: Adding input device American Megatrends Inc. Virtual Keyboard and Mouse (/dev/input/event1)
- [ 448.264] (**) American Megatrends Inc. Virtual Keyboard and Mouse: Applying InputClass "evdev pointer catchall"
- [ 448.264] (II) Using input driver 'evdev' for 'American Megatrends Inc. Virtual Keyboard and Mouse'
- [ 448.264] (**) American Megatrends Inc. Virtual Keyboard and Mouse: always reports core events
- [ 448.264] (**) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Device: "/dev/input/event1"
- [ 448.321] (EE) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Unable to open evdev device "/dev/input/event1".
- [ 448.321] (EE) PreInit returned 2 for "American Megatrends Inc. Virtual Keyboard and Mouse"
- [ 448.321] (II) UnloadModule: "evdev"
- [ 448.321] (II) config/udev: Adding input device American Megatrends Inc. Virtual Keyboard and Mouse (/dev/input/mouse0)
- [ 448.321] (II) No input driver specified, ignoring this device.
- [ 448.321] (II) This device may have been added with another device file.
- [ 448.322] (II) config/udev: Adding input device Barcode Reader (/dev/input/event2)
- [ 448.322] (**) Barcode Reader : Applying InputClass "evdev keyboard catchall"
- [ 448.322] (**) Barcode Reader : Applying InputClass "system-keyboard"
- [ 448.322] (II) Using input driver 'evdev' for 'Barcode Reader '
- [ 448.322] (**) Barcode Reader : always reports core events
- [ 448.322] (**) evdev: Barcode Reader : Device: "/dev/input/event2"
- [ 448.322] (--) evdev: Barcode Reader : Vendor 0x13ba Product 0x18
- [ 448.322] (--) evdev: Barcode Reader : Found keys
- [ 448.322] (II) evdev: Barcode Reader : Configuring as keyboard
- [ 448.322] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:13BA:0018.0003/input/input2/event2"
- [ 448.322] (II) XINPUT: Adding extended input device "Barcode Reader " (type: KEYBOARD, id 9)
- [ 448.322] (**) Option "xkb_rules" "evdev"
- [ 448.322] (**) Option "xkb_model" "pc105"
- [ 448.322] (**) Option "xkb_layout" "us,ru,ua"
- [ 448.322] (**) Option "xkb_variant" ",winkeys,winkeys"
- [ 448.322] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:scroll"
- [ 448.323] (II) config/udev: Adding input device Barcode Reader (/dev/input/event3)
- [ 448.323] (**) Barcode Reader : Applying InputClass "evdev pointer catchall"
- [ 448.323] (**) Barcode Reader : Applying InputClass "evdev keyboard catchall"
- [ 448.323] (**) Barcode Reader : Applying InputClass "system-keyboard"
- [ 448.323] (II) Using input driver 'evdev' for 'Barcode Reader '
- [ 448.323] (**) Barcode Reader : always reports core events
- [ 448.324] (**) evdev: Barcode Reader : Device: "/dev/input/event3"
- [ 448.324] (--) evdev: Barcode Reader : Vendor 0x13ba Product 0x18
- [ 448.324] (--) evdev: Barcode Reader : Found 9 mouse buttons
- [ 448.324] (--) evdev: Barcode Reader : Found scroll wheel(s)
- [ 448.324] (--) evdev: Barcode Reader : Found relative axes
- [ 448.324] (--) evdev: Barcode Reader : Found x and y relative axes
- [ 448.324] (--) evdev: Barcode Reader : Found absolute axes
- [ 448.324] (II) evdev: Barcode Reader : Forcing absolute x/y axes to exist.
- [ 448.324] (--) evdev: Barcode Reader : Found keys
- [ 448.324] (II) evdev: Barcode Reader : Configuring as mouse
- [ 448.324] (II) evdev: Barcode Reader : Configuring as keyboard
- [ 448.324] (II) evdev: Barcode Reader : Adding scrollwheel support
- [ 448.324] (**) evdev: Barcode Reader : YAxisMapping: buttons 4 and 5
- [ 448.324] (**) evdev: Barcode Reader : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
- [ 448.324] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:13BA:0018.0004/input/input3/event3"
- [ 448.324] (II) XINPUT: Adding extended input device "Barcode Reader " (type: KEYBOARD, id 10)
- [ 448.324] (**) Option "xkb_rules" "evdev"
- [ 448.324] (**) Option "xkb_model" "pc105"
- [ 448.324] (**) Option "xkb_layout" "us,ru,ua"
- [ 448.324] (**) Option "xkb_variant" ",winkeys,winkeys"
- [ 448.324] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:scroll"
- [ 448.324] (II) evdev: Barcode Reader : initialized for relative axes.
- [ 448.324] (WW) evdev: Barcode Reader : ignoring absolute axes.
- [ 448.325] (**) Barcode Reader : (accel) keeping acceleration scheme 1
- [ 448.325] (**) Barcode Reader : (accel) acceleration profile 0
- [ 448.325] (**) Barcode Reader : (accel) acceleration factor: 2.000
- [ 448.325] (**) Barcode Reader : (accel) acceleration threshold: 4
- [ 448.325] (II) config/udev: Adding input device Barcode Reader (/dev/input/mouse1)
- [ 448.325] (**) Barcode Reader : Applying InputClass "system-keyboard"
- [ 448.325] (II) No input driver specified, ignoring this device.
- [ 448.325] (II) This device may have been added with another device file.
Advertisement
Add Comment
Please, Sign In to add comment