API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jan 26th, 2012
66
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 20.58 KB | None | 0 0
raw download clone embed print report
  1. # dmesg
  2. [ 0.000000] Linux version 2.6.32 (koen@dominion) (gcc version 4.3.3 (GCC) ) #3 PREEMPT Tue Jul 26 10:56:56 CEST 2011
  3. [ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f
  4. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  5. [ 0.000000] Machine: OMAP3 Beagle Board
  6. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  7. [ 0.000000] On node 0 totalpages: 32768
  8. [ 0.000000] free_area_init_node: node 0, pgdat c066da98, node_mem_map c06d0000
  9. [ 0.000000] Normal zone: 256 pages used for memmap
  10. [ 0.000000] Normal zone: 0 pages reserved
  11. [ 0.000000] Normal zone: 32512 pages, LIFO batch:7
  12. [ 0.000000] OMAP3430/3530 ES3.0 (l2cache iva sgx neon isp )
  13. [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
  14. [ 0.000000] Reserving 12582912 bytes SDRAM for VRAM
  15. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
  16. [ 0.000000] Kernel command line: console=ttyS2,115200n8 mpurate=auto buddy=unknown camera=none vram=12M omapfb.mode=dvi:1024x768-16@60 omapdss.def_disp=dt
  17. [ 0.000000] Beagle expansionboard: unknown
  18. [ 0.000000] Beagle cameraboard: none
  19. [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  20. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  21. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  22. [ 0.000000] Memory: 128MB = 128MB total
  23. [ 0.000000] Memory: 110548KB available (5900K code, 673K data, 204K init, 0K highmem)
  24. [ 0.000000] Hierarchical RCU implementation.
  25. [ 0.000000] NR_IRQS:402
  26. [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
  27. [ 0.000000] Reprogramming SDRC clock to 332000000 Hz
  28. [ 0.000000] GPMC revision 5.0
  29. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
  30. [ 0.000000] Total of 96 interrupts on 1 active controller
  31. [ 0.000000] OMAP GPIO hardware version 2.5
  32. [ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
  33. [ 0.000000] Console: colour dummy device 80x30
  34. [ 0.000000] Calibrating delay loop... 512.57 BogoMIPS (lpj=2002944)
  35. [ 0.000000] Mount-cache hash table entries: 512
  36. [ 0.000000] CPU: Testing write buffer coherency: ok
  37. [ 0.000000] tmpfs: No value for mount option 'mode'
  38. [ 0.000000] devtmpfs: initialized
  39. [ 0.000000] regulator: core version 0.5
  40. [ 0.000000] NET: Registered protocol family 16
  41. [ 0.000000] OMAP3 Beagle Rev: Ax/Bx
  42. [ 0.000000] Found NAND on CS0
  43. [ 0.000000] Registering NAND on CS0
  44. [ 0.000000] Unable to get DVI reset GPIO
  45. [ 12.050231] OMAP DMA hardware revision 4.0
  46. [ 12.059326] bio: create slab <bio-0> at 0
  47. [ 12.060943] SCSI subsystem initialized
  48. [ 12.062713] usbcore: registered new interface driver usbfs
  49. [ 12.062927] usbcore: registered new interface driver hub
  50. [ 12.063140] usbcore: registered new device driver usb
  51. [ 12.063598] i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz
  52. [ 12.066772] twl4030: PIH (irq 7) chaining IRQs 368..375
  53. [ 12.066833] twl4030: power (irq 373) chaining IRQs 376..383
  54. [ 12.067199] twl4030: gpio (irq 368) chaining IRQs 384..401
  55. [ 12.068878] regulator: VUSB1V5: 1500 mV normal standby
  56. [ 12.069183] regulator: VUSB1V8: 1800 mV normal standby
  57. [ 12.069488] regulator: VUSB3V1: 3100 mV normal standby
  58. [ 12.073638] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
  59. [ 12.074157] regulator: VMMC1: 1850 <--> 3150 mV normal standby
  60. [ 12.074584] regulator: VDAC: 1800 mV normal standby
  61. [ 12.074890] regulator: VPLL2: 1800 mV normal standby
  62. [ 12.075225] regulator: VSIM: 1800 <--> 3000 mV normal standby
  63. [ 12.075653] regulator: VAUX3: 1800 mV normal standby
  64. [ 12.076049] regulator: VAUX4: 1800 mV normal standby
  65. [ 12.076263] i2c_omap i2c_omap.2: bus 2 rev3.12 at 400 kHz
  66. [ 12.090515] i2c_omap i2c_omap.3: bus 3 rev3.12 at 100 kHz
  67. [ 12.092071] Switching to clocksource 32k_counter
  68. [ 12.104522] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
  69. [ 12.104736] musb_hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine (X), bulk split (X), HB-ISO Rx, HB-ISO Tx, SoftConn)
  70. [ 12.104766] musb_hdrc: MHDRC RTL version 1.400
  71. [ 12.104797] musb_hdrc: setup fifo_mode 4
  72. [ 12.104827] musb_hdrc: 28/31 max ep, 16384/16384 memory
  73. [ 12.104858] musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
  74. [ 12.104888] musb_hdrc musb_hdrc: MUSB HDRC host driver
  75. [ 12.105041] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
  76. [ 12.105194] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  77. [ 12.105224] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  78. [ 12.105255] usb usb1: Product: MUSB HDRC host driver
  79. [ 12.105255] usb usb1: Manufacturer: Linux 2.6.32 musb-hcd
  80. [ 12.105285] usb usb1: SerialNumber: musb_hdrc
  81. [ 12.106079] hub 1-0:1.0: USB hub found
  82. [ 12.106109] hub 1-0:1.0: 1 port detected
  83. [ 12.107452] NET: Registered protocol family 2
  84. [ 12.107727] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  85. [ 12.108520] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  86. [ 12.108673] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
  87. [ 12.108734] TCP: Hash tables configured (established 4096 bind 4096)
  88. [ 12.108764] TCP reno registered
  89. [ 12.108795] UDP hash table entries: 256 (order: 0, 4096 bytes)
  90. [ 12.108825] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  91. [ 12.109130] NET: Registered protocol family 1
  92. [ 12.109680] RPC: Registered udp transport module.
  93. [ 12.109710] RPC: Registered tcp transport module.
  94. [ 12.109710] RPC: Registered tcp NFSv4.1 backchannel transport module.
  95. [ 12.110870] omap-iommu omap-iommu.0: isp registered
  96. [ 12.113006] VFS: Disk quotas dquot_6.5.2
  97. [ 12.113128] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  98. [ 12.114501] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  99. [ 12.115539] JFFS2 version 2.2. (NAND) (SUMMARY) �੩ 2001-2006 Red Hat, Inc.
  100. [ 12.116668] msgmni has been set to 216
  101. [ 12.122100] alg: No test for stdrng (krng)
  102. [ 12.122467] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
  103. [ 12.122497] io scheduler noop registered
  104. [ 12.122497] io scheduler deadline registered
  105. [ 12.122680] io scheduler cfq registered (default)
  106. [ 12.178802] OMAP DSS rev 2.0
  107. [ 12.178863] OMAP DISPC rev 3.0
  108. [ 12.178924] OMAP VENC rev 2
  109. [ 12.179229] OMAP DSI rev 1.0
  110. [ 12.520385] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  111. [ 12.542480] serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
  112. [ 12.563659] serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
  113. [ 12.584838] serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654
  114. [ 13.137908] console [ttyS2] enabled
  115. [ 13.150360] brd: module loaded
  116. [ 13.157775] loop: module loaded
  117. [ 13.162445] omap2-nand driver initializing
  118. [ 13.166992] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V 16-bit)
  119. [ 13.176239] cmdlinepart partition parsing not available
  120. [ 13.181549] Creating 5 MTD partitions on "omap2-nand":
  121. [ 13.186767] 0x000000000000-0x000000080000 : "X-Loader"
  122. [ 13.193389] 0x000000080000-0x000000260000 : "U-Boot"
  123. [ 13.200164] 0x000000260000-0x000000280000 : "U-Boot Env"
  124. [ 13.206512] 0x000000280000-0x000000680000 : "Kernel"
  125. [ 13.214172] 0x000000680000-0x000010000000 : "File System"
  126. [ 13.329132] usbcore: registered new interface driver catc
  127. [ 13.334625] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
  128. [ 13.340698] usbcore: registered new interface driver kaweth
  129. [ 13.346374] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
  130. [ 13.354034] usbcore: registered new interface driver pegasus
  131. [ 13.359771] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
  132. [ 13.366821] usbcore: registered new interface driver rtl8150
  133. [ 13.372619] usbcore: registered new interface driver asix
  134. [ 13.378204] usbcore: registered new interface driver cdc_ether
  135. [ 13.384246] usbcore: registered new interface driver dm9601
  136. [ 13.390014] usbcore: registered new interface driver smsc95xx
  137. [ 13.395904] usbcore: registered new interface driver gl620a
  138. [ 13.401641] usbcore: registered new interface driver net1080
  139. [ 13.407501] usbcore: registered new interface driver plusb
  140. [ 13.413177] usbcore: registered new interface driver rndis_host
  141. [ 13.419250] usbcore: registered new interface driver cdc_subset
  142. [ 13.425323] usbcore: registered new interface driver zaurus
  143. [ 13.431091] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  144. [ 13.439361] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  145. [ 13.446258] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
  146. [ 13.452362] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 2
  147. [ 13.460052] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
  148. [ 13.475219] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
  149. [ 13.481140] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  150. [ 13.488037] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  151. [ 13.495330] usb usb2: Product: OMAP-EHCI Host Controller
  152. [ 13.500732] usb usb2: Manufacturer: Linux 2.6.32 ehci_hcd
  153. [ 13.506164] usb usb2: SerialNumber: ehci-omap.0
  154. [ 13.511596] hub 2-0:1.0: USB hub found
  155. [ 13.515472] hub 2-0:1.0: 3 ports detected
  156. [ 13.545928] Initializing USB Mass Storage driver...
  157. [ 13.551025] usbcore: registered new interface driver usb-storage
  158. [ 13.557128] USB Mass Storage support registered.
  159. [ 13.562255] mice: PS/2 mouse device common for all mice
  160. [ 13.567962] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  161. [ 13.576049] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1
  162. [ 13.586883] i2c /dev entries driver
  163. [ 13.591217] Linux video capture interface: v2.00
  164. [ 13.596252] omap-iommu omap-iommu.0: isp: version 1.1
  165. [ 13.601470] Saving csi2 context
  166. [ 13.601684] Restoring csi2 context
  167. [ 13.601776] Saving csi2 context
  168. [ 13.603454] vpfe_init
  169. [ 13.606414] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
  170. [ 13.613342] cpuidle: using governor ladder
  171. [ 13.617553] cpuidle: using governor menu
  172. [ 13.727844] mmci-omap-hs mmci-omap-hs.1: err -16 configuring card detect
  173. [ 13.734985] Registered led device: beagleboard::usr0
  174. [ 13.740142] Registered led device: beagleboard::usr1
  175. [ 13.746337] Registered led device: beagleboard::pmu_stat
  176. [ 13.754180] usbcore: registered new interface driver usbhid
  177. [ 13.759857] usbhid: USB HID core driver
  178. [ 13.763946] Advanced Linux Sound Architecture Driver Version 1.0.21.
  179. [ 13.771026] usbcore: registered new interface driver snd-usb-audio
  180. [ 13.859008] No device for DAI omap-mcbsp-dai-0
  181. [ 13.863494] No device for DAI omap-mcbsp-dai-1
  182. [ 13.868011] No device for DAI omap-mcbsp-dai-2
  183. [ 13.872467] No device for DAI omap-mcbsp-dai-3
  184. [ 13.876983] No device for DAI omap-mcbsp-dai-4
  185. [ 13.881500] OMAP3 Beagle SoC init
  186. [ 13.886596] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
  187. [ 13.899871] ALSA device list:
  188. [ 13.902862] #0: omap3beagle (twl4030)
  189. [ 13.906890] oprofile: using arm/armv7
  190. [ 13.910858] TCP cubic registered
  191. [ 13.914184] NET: Registered protocol family 17
  192. [ 13.918701] NET: Registered protocol family 15
  193. [ 13.923309] lib80211: common routines for IEEE802.11 drivers
  194. [ 13.929077] lib80211_crypt: registered algorithm 'NULL'
  195. [ 13.929077] ThumbEE CPU extension supported.
  196. [ 13.933380] Power Management for TI OMAP3.
  197. [ 13.939056] Division by zero in kernel.
  198. [ 13.942993] [<c0040c40>] (unwind_backtrace+0x0/0xdc) from [<c0254d1c>] (Ldiv0+0x8/0x10)
  199. [ 13.951110] [<c0254d1c>] (Ldiv0+0x8/0x10) from [<c781bf88>] (0xc781bf88)
  200. [ 13.957885] Division by zero in kernel.
  201. [ 13.961822] [<c0040c40>] (unwind_backtrace+0x0/0xdc) from [<c0254d1c>] (Ldiv0+0x8/0x10)
  202. [ 13.969909] [<c0254d1c>] (Ldiv0+0x8/0x10) from [<c781bf88>] (0xc781bf88)
  203. [ 13.976745] SmartReflex driver initialized
  204. [ 13.989746] Disabling unused clock "sr2_fck"
  205. [ 13.989776] Disabling unused clock "sr1_fck"
  206. [ 13.989807] Disabling unused clock "mcbsp_fck"
  207. [ 13.989837] Disabling unused clock "mcbsp_fck"
  208. [ 13.989837] Disabling unused clock "mcbsp_fck"
  209. [ 13.989868] Disabling unused clock "mcbsp_ick"
  210. [ 13.989898] Disabling unused clock "mcbsp_ick"
  211. [ 13.989898] Disabling unused clock "mcbsp_ick"
  212. [ 13.989929] Disabling unused clock "gpt2_ick"
  213. [ 13.989959] Disabling unused clock "gpt3_ick"
  214. [ 13.989959] Disabling unused clock "gpt4_ick"
  215. [ 13.989990] Disabling unused clock "gpt5_ick"
  216. [ 13.990020] Disabling unused clock "gpt6_ick"
  217. [ 13.990020] Disabling unused clock "gpt7_ick"
  218. [ 13.990051] Disabling unused clock "gpt8_ick"
  219. [ 13.990051] Disabling unused clock "gpt9_ick"
  220. [ 13.990081] Disabling unused clock "wdt3_ick"
  221. [ 13.990112] Disabling unused clock "wdt3_fck"
  222. [ 13.990112] Disabling unused clock "gpio2_dbck"
  223. [ 13.990142] Disabling unused clock "gpio3_dbck"
  224. [ 13.990173] Disabling unused clock "gpio4_dbck"
  225. [ 13.990173] Disabling unused clock "gpio5_dbck"
  226. [ 13.990203] Disabling unused clock "gpio6_dbck"
  227. [ 13.990234] Disabling unused clock "gpt9_fck"
  228. [ 13.990234] Disabling unused clock "gpt8_fck"
  229. [ 13.990264] Disabling unused clock "gpt7_fck"
  230. [ 13.990295] Disabling unused clock "gpt6_fck"
  231. [ 13.990295] Disabling unused clock "gpt5_fck"
  232. [ 13.990325] Disabling unused clock "gpt4_fck"
  233. [ 13.990356] Disabling unused clock "gpt3_fck"
  234. [ 13.990356] Disabling unused clock "gpt2_fck"
  235. [ 13.990386] Disabling unused clock "gpt1_ick"
  236. [ 13.990417] Disabling unused clock "wdt1_ick"
  237. [ 13.990417] Disabling unused clock "gpio1_dbck"
  238. [ 13.990447] Disabling unused clock "gpt1_fck"
  239. [ 13.990478] Disabling unused clock "cam_mclk"
  240. [ 13.990539] Disabling unused clock "des1_ick"
  241. [ 13.990539] Disabling unused clock "sha11_ick"
  242. [ 13.990570] Disabling unused clock "rng_ick"
  243. [ 13.990570] Disabling unused clock "aes1_ick"
  244. [ 13.990600] Disabling unused clock "ssi_ick"
  245. [ 13.990631] Disabling unused clock "mailboxes_ick"
  246. [ 13.990631] Disabling unused clock "mcbsp_ick"
  247. [ 13.990661] Disabling unused clock "mcbsp_ick"
  248. [ 13.990692] Disabling unused clock "gpt10_ick"
  249. [ 13.990692] Disabling unused clock "gpt11_ick"
  250. [ 13.990722] Disabling unused clock "hdq_ick"
  251. [ 13.990753] Disabling unused clock "mspro_ick"
  252. [ 13.990783] Disabling unused clock "des2_ick"
  253. [ 13.990783] Disabling unused clock "sha12_ick"
  254. [ 13.990814] Disabling unused clock "aes2_ick"
  255. [ 13.990814] Disabling unused clock "icr_ick"
  256. [ 13.990844] Disabling unused clock "pka_ick"
  257. [ 13.990875] Disabling unused clock "ssi_ssr_fck"
  258. [ 13.990875] Disabling unused clock "hdq_fck"
  259. [ 13.990997] Disabling unused clock "mcbsp_fck"
  260. [ 13.991027] Disabling unused clock "mcbsp_fck"
  261. [ 13.991058] Disabling unused clock "mspro_fck"
  262. [ 13.991058] Disabling unused clock "gpt11_fck"
  263. [ 13.991088] Disabling unused clock "gpt10_fck"
  264. [ 13.991119] Disabling unused clock "sad2d_ick"
  265. [ 13.991149] Disabling unused clock "dpll4_m6x2_ck"
  266. [ 13.991180] Disabling unused clock "dpll3_m3x2_ck"
  267. [ 13.991180] Disabling unused clock "sys_clkout1"
  268. [ 13.991912] ------------[ cut here ]------------
  269. [ 13.996582] WARNING: at arch/arm/mach-omap2/dpll.c:439 omap3_noncore_dpll_set_rate+0x228/0x26c()
  270. [ 14.005401] Modules linked in:
  271. [ 14.008514] [<c0040c40>] (unwind_backtrace+0x0/0xdc) from [<c006d4c0>] (warn_slowpath_common+0x4c/0x80)
  272. [ 14.017974] [<c006d4c0>] (warn_slowpath_common+0x4c/0x80) from [<c004b138>] (omap3_noncore_dpll_set_rate+0x228/0x26c)
  273. [ 14.028656] [<c004b138>] (omap3_noncore_dpll_set_rate+0x228/0x26c) from [<c00496ec>] (omap2_clk_set_rate+0x24/0x34)
  274. [ 14.039154] [<c00496ec>] (omap2_clk_set_rate+0x24/0x34) from [<c005176c>] (clk_set_rate+0x4c/0xac)
  275. [ 14.048156] [<c005176c>] (clk_set_rate+0x4c/0xac) from [<c004f148>] (program_opp+0xe0/0x180)
  276. [ 14.056640] [<c004f148>] (program_opp+0xe0/0x180) from [<c004f2d8>] (resource_set_opp_level+0xf0/0x16c)
  277. [ 14.066101] [<c004f2d8>] (resource_set_opp_level+0xf0/0x16c) from [<c004f390>] (set_opp+0x3c/0x100)
  278. [ 14.075195] [<c004f390>] (set_opp+0x3c/0x100) from [<c005994c>] (update_resource_level+0xa8/0xcc)
  279. [ 14.084136] [<c005994c>] (update_resource_level+0xa8/0xcc) from [<c004f040>] (set_freq+0x110/0x138)
  280. [ 14.093231] [<c004f040>] (set_freq+0x110/0x138) from [<c005994c>] (update_resource_level+0xa8/0xcc)
  281. [ 14.102325] [<c005994c>] (update_resource_level+0xa8/0xcc) from [<c0058a68>] (omap_target+0x5c/0x78)
  282. [ 14.111541] [<c0058a68>] (omap_target+0x5c/0x78) from [<c038306c>] (__cpufreq_driver_target+0x5c/0x78)
  283. [ 14.120910] [<c038306c>] (__cpufreq_driver_target+0x5c/0x78) from [<c0384e10>] (cpufreq_governor_performance+0x48/0x5c)
  284. [ 14.131744] [<c0384e10>] (cpufreq_governor_performance+0x48/0x5c) from [<c0382dbc>] (__cpufreq_governor+0x160/0x1bc)
  285. [ 14.142333] [<c0382dbc>] (__cpufreq_governor+0x160/0x1bc) from [<c0383bfc>] (__cpufreq_set_policy+0x190/0x220)
  286. [ 14.152404] [<c0383bfc>] (__cpufreq_set_policy+0x190/0x220) from [<c0384370>] (cpufreq_add_dev+0x3dc/0x564)
  287. [ 14.162200] [<c0384370>] (cpufreq_add_dev+0x3dc/0x564) from [<c02b9f60>] (sysdev_driver_register+0xb0/0x120)
  288. [ 14.172088] [<c02b9f60>] (sysdev_driver_register+0xb0/0x120) from [<c0382f30>] (cpufreq_register_driver+0xec/0x1cc)
  289. [ 14.182617] [<c0382f30>] (cpufreq_register_driver+0xec/0x1cc) from [<c003b374>] (do_one_initcall+0x5c/0x1bc)
  290. [ 14.192504] [<c003b374>] (do_one_initcall+0x5c/0x1bc) from [<c0008414>] (kernel_init+0xa4/0x128)
  291. [ 14.201324] [<c0008414>] (kernel_init+0xa4/0x128) from [<c003c9dc>] (kernel_thread_exit+0x0/0x8)
  292. [ 14.210174] ---[ end trace e998718fd10e7bb9 ]---
  293. [ 14.215087] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
  294. [ 14.223480] registered taskstats version 1
  295. [ 14.274719] Console: switching to colour frame buffer device 128x48
  296. [ 14.292999] regulator_init_complete: incomplete constraints, leaving VAUX3 on
  297. [ 14.300445] regulator_init_complete: incomplete constraints, leaving VDAC on
  298. [ 14.307739] omap_vout omap_vout: probed for an unknown device
  299. [ 14.313995] Waiting for root device /dev/mmcblk0p2...
  300. [ 14.334838] mmc0: new high speed SDHC card at address 0001
  301. [ 14.340759] mmcblk0: mmc0:0001 00000 3.79 GiB
  302. [ 14.345642] mmcblk0: p1 p2
  303. [ 19.089630] kjournald starting. Commit interval 5 seconds
  304. [ 19.278106] EXT3-fs (mmcblk0p2): using internal journal
  305. [ 19.283416] EXT3-fs (mmcblk0p2): recovery complete
  306. [ 19.290588] EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
  307. [ 19.297790] VFS: Mounted root (ext3 filesystem) on device 179:2.
  308. [ 19.305511] devtmpfs: mounted
  309. [ 19.308563] Freeing init memory: 204K
  310. [ 20.085540] udev: starting version 151
  311. [ 30.033233] Bluetooth: Core ver 2.15
  312. [ 30.038116] NET: Registered protocol family 31
  313. [ 30.042602] Bluetooth: HCI device and connection manager initialized
  314. [ 30.049041] Bluetooth: HCI socket layer initialized
  315. [ 30.074157] Bluetooth: L2CAP ver 2.14
  316. [ 30.077941] Bluetooth: L2CAP socket layer initialized
  317. [ 30.101440] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  318. [ 30.249969] NET: Registered protocol family 10
  319. [ 30.324523] irda_init()
  320. [ 30.324584] NET: Registered protocol family 23
  321. [ 30.348510] IrCOMM protocol (Dag Brattli)
  322. [ 30.475646] Bluetooth: RFCOMM TTY layer initialized
  323. [ 30.480590] Bluetooth: RFCOMM socket layer initialized
  324. [ 30.485870] Bluetooth: RFCOMM ver 1.11
  325. [ 38.316162] CMEMK module: built on Jan 25 2011 at 21:07:57
  326. [ 38.322723] Reference Linux version 2.6.32
  327. [ 38.327758] File /OE/angstrom-dev/work/beagleboard-angstrom-linux-gnueabi/ti-linuxutils-1_2_25_05_11-r100d/linuxutils_2_25_05_11/packages/ti/sdo/linuxuc
  328. [ 38.349243] CMEM Range Overlaps Kernel Physical - allowing overlap
  329. [ 38.356445] CMEM phys_start (0x86300000) overlaps kernel (0x80000000 -> 0x88000000)
  330. [ 38.364959] CMEMK Error: Failed to request_mem_region(0x86300000, 16777216)
  331. [ 38.409332] DSPLINK Module (1.65.00.03) created on Date: Jan 25 2011 Time: 20:51:12
  332. [ 38.453887] SDMAK module: built on Jan 25 2011 at 21:08:00
  333. [ 38.459411] Reference Linux version 2.6.32
  334. [ 38.465057] File /OE/angstrom-dev/work/beagleboard-angstrom-linux-gnueabi/ti-linuxutils-1_2_25_05_11-r100d/linuxutils_2_25_05_11/packages/ti/sdo/linuxuc
  335. [ 42.970794] usbcore: registered new interface driver usbserial
  336. [ 42.979187] USB Serial support registered for generic
  337. [ 42.986724] usbcore: registered new interface driver usbserial_generic
  338. [ 42.994262] usbserial: USB Serial Driver core
  339. [ 56.714782] zero gadget: Gadget Zero, version: Cinco de Mayo 2008
  340. [ 56.721984] zero gadget: zero ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!