U-Boot SPL 2014.07-00016-g329fca9 (Jul 28 2014 - 12:35:02)


U-Boot 2014.07-00016-g329fca9 (Jul 28 2014 - 12:35:02), Build: jenkins-github_Bo                                                                                        otloader-Builder-375

I2C:   ready
DRAM:  512 MiB
NAND:  0 MiB
MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
*** Warning - readenv() failed, using default environment

Net:   <ethaddr> not set. Validating first E-fuse MAC
cpsw, usb_ether
Hit any key to stop autoboot:  0
gpio: pin 53 (gpio 53) value is 1
Card did not respond to voltage select!
Card did not respond to voltage select!
gpio: pin 56 (gpio 56) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 54 (gpio 54) value is 0
switch to partitions #0, OK
mmc1(part 0) is current device
gpio: pin 54 (gpio 54) value is 1
SD/MMC found on device 1
Checking for: /uEnv.txt ...
Checking for: /boot.scr ...
Checking for: /boot/boot.scr ...
Checking for: /boot/uEnv.txt ...
gpio: pin 55 (gpio 55) value is 1
764 bytes read in 26 ms (28.3 KiB/s)
Loaded environment from /boot/uEnv.txt
Checking if uname_r is set in /boot/uEnv.txt...
gpio: pin 56 (gpio 56) value is 1
Running uname_boot ...
loading /boot/vmlinuz-3.8.13-bone64 ...
5605264 bytes read in 389 ms (13.7 MiB/s)
loading /boot/dtbs/3.8.13-bone64/am335x-boneblack.dtb ...
26098 bytes read in 35 ms (727.5 KiB/s)
loading /boot/initrd.img-3.8.13-bone64 ...
2860737 bytes read in 193 ms (14.1 MiB/s)
Kernel image @ 0x82000000 [ 0x000000 - 0x558790 ]
## Flattened Device Tree blob at 88000000
   Booting using the fdt blob at 0x88000000
   Loading Ramdisk to 8fd45000, end 8ffff6c1 ... OK
   Loading Device Tree to 8fd3b000, end 8fd445f1 ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.372489] omap2_mbox_probe: platform not supported
[    0.527365] tps65217-bl tps65217-bl: no platform data provided
[    0.591278] bone-capemgr bone_capemgr.9: slot #0: No cape found
[    0.628387] bone-capemgr bone_capemgr.9: slot #1: No cape found
[    0.665495] bone-capemgr bone_capemgr.9: slot #2: No cape found
[    0.702605] bone-capemgr bone_capemgr.9: slot #3: No cape found
[    0.718406] bone-capemgr bone_capemgr.9: slot #6: BB-BONELT-HDMIN conflict P8                                                                                        .45 (#5:BB-BONELT-HDMI)
[    0.727998] bone-capemgr bone_capemgr.9: slot #6: Failed verification
[    0.734731] bone-capemgr bone_capemgr.9: loader: failed to load slot-6 BB-BON                                                                                        ELT-HDMIN:00A0 (prio 2)
[    0.751137] omap_hsmmc mmc.5: of_parse_phandle_with_args of 'reset' failed
[    0.814196] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by                                                                                         44e10800.pinmux; cannot claim for gpio-leds.8
[    0.825876] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status -22
[    0.833150] pinctrl-single 44e10800.pinmux: could not request pin 21 on devic                                                                                        e pinctrl-single
Loading, please wait...
systemd-fsck[207]: rootfs: clean, 80778/111104 files, 422390/444160 blocks

Debian GNU/Linux 7 beaglebone ttyO0

default username:password is [debian:temppwd]

Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian

The IP Address for usb0 is: 192.168.7.2