Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot 1.2.0 (Jan 27 2010 - 18:45:22)
- PSPU-Boot 1.2.1.25
- DRAM: 64 MB
- Spansion S25FL064P flash found
- Flash: 8 MB
- In: serial
- Out: serial
- Err: serial
- Running RAM test
- RAM test passed
- *** ACTIMAGE = 1, will try to boot UBFI1 stored @0x48040000
- ## Executing script at 48040000
- ============== Running script =========
- *** Running from UBFI1 partition @0x48040000
- Load address = 0x480410e8 (0x10e8)
- Kernel address = 0x48041134 (0x1134)
- kernel size = 0xcdacc
- FS address = 0x4810ec00 (0xcec00)
- FS size = 0x210800
- NVRAM offset = 0x7b0000
- NVRAM size = 0x50000
- *** UBFI1 bootscript executed successfully.
- Start booting...
- ## Booting image at 480410e8 ...
- Image Name: Multi Image File
- Image Type: ARM Linux Multi-File Image (uncompressed)
- Data Size: 3007192 Bytes = 2.9 MB
- Load Address: 80a00000
- Entry Point: 80a00000
- Contents:
- Image 0: 842444 Bytes = 822.7 kB
- Image 1: 2164736 Bytes = 2.1 MB
- Verifying Checksum ... OK
- OK
- Starting kernel ...
- Starting LZMA Uncompression Algorithm.
- Compressed file is LZMA format.
- Linux version 2.6.18_pro500 (ccbuild@buckeye.arrisi.com) (gcc version 4.2.0 TI-Puma5 20090519) #1 PREEMPT Fri Oct 8 17:54:08 EDT 2010
- CPU: ARMv6-compatible processor [410fb764] revision 4 (ARMv6TEJ), cr=00c538ff
- Machine: puma5
- Ignoring unrecognised tag 0x00000000
- Memory policy: ECC disabled, Data cache writethrough
- Reserved 0k DSP memory starting from Physical 0x84000000
- CPU0: D VIPT write-back cache
- CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
- CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
- Real-Time Preemption Support (C) 2004-2006 Ingo Molnar
- Built 1 zonelists. Total pages: 16384
- Kernel command line: root=/dev/mtdblock6 mtdparts=spansion:0x20000(U-Boot),0x10000(env1),0x10000(env2),0x3b0000@0x40000(UBFI1),0x3b0000@0x3f0000(UBFI2),0xcdacc@0x41134(Kernel),0x210800(RootFileSystem),0x50000@0x7b0000(nvram) console=ttyS0,115200n8 ethaddr0=00:00:CA:11:22:33 usbhostaddr=00.00.00.00.00.00
- WARNING: experimental RCU implementation.
- Interrupt controller revision : 4e822100
- PID hash table entries: 512 (order: 9, 2048 bytes)
- Power & Sleep Controller @ 0xd8621000 Initialized [id-0x44822905]
- Initialized Peripheral Port Remap Register to base : 0x50000000
- Puma5 Timer0 initialized
- Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
- Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
- Memory: 64MB = 64MB total
- Memory: 62460KB available (1896K code, 502K data, 76K init)
- Mount-cache hash table entries: 512
- CPU: Testing write buffer coherency: ok
- NET: Registered protocol family 16
- Off chip memory allocated: 173568
- QMgr Init: buffer after alignment: 80380000
- avalanche_ppd_init: PP system initialized successfully.
- avalanche_ppd_init(577):return code 0x00
- musb_hdrc: version 2.2a/db-0.5.1, cppi-dma, peripheral, debug=2
- Warn : USB PLL not Locked UsbPhyCtrl(30)
- musb_hdrc: USB Peripheral mode controller at d3300000 using DMA, IRQ 24
- HIL Core: Profile intrusive has been Loaded.
- NET: Registered protocol family 2
- IP route cache hash table entries: 512 (order: -1, 2048 bytes)
- TCP established hash table entries: 2048 (order: 4, 65536 bytes)
- TCP bind hash table entries: 1024 (order: 2, 28672 bytes)
- TCP: Hash tables configured (established 2048 bind 1024)
- TCP reno registered
- squashfs: version 3.3 (2007/10/31) Phillip Lougher
- squashfs: LZMA suppport for slax.org by jro
- JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
- Initializing Cryptographic API
- io scheduler noop registered (default)
- watchdog: TI Avalanche Watchdog Timer: timer margin 42 sec
- TI LED driver initialized [major=254]
- Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
- serial8250: ttyS0 at MMIO map 0x8610f03 mem 0xd8610f03 (irq = 8) is a TI 16550A
- serial8250: ttyS1 at MMIO map 0x8610e03 mem 0xd8610e03 (irq = 7) is a TI 16550A
- loop: loaded (max 8 devices)
- Loading cpgmac driver for puma5
- TI CPGMAC_F Linux DDA version 0.1 - CPGMAC_F DDC version 0.2
- Cpmac: Installed 1 instances.
- i2c /dev entries driver
- Serial Flash [Bus:0 CS:0] : s25fl064a 8192KB, 128 sectors each 64KB
- 8 cmdlinepart partitions found on MTD device spansion
- partitions[0] = {.name = U-Boot, .offset = 0x00000000,.size = 0x00020000 (128K) }
- partitions[1] = {.name = env1, .offset = 0x00020000,.size = 0x00010000 (64K) }
- partitions[2] = {.name = env2, .offset = 0x00030000,.size = 0x00010000 (64K) }
- partitions[3] = {.name = UBFI1, .offset = 0x00040000,.size = 0x003b0000 (3776K) }
- partitions[4] = {.name = UBFI2, .offset = 0x003f0000,.size = 0x003b0000 (3776K) }
- partitions[5] = {.name = Kernel, .offset = 0x00041134,.size = 0x000cdacc (822K) }
- partitions[6] = {.name = RootFileSystem, .offset = 0x0010ec00,.size = 0x00210800 (2114K) }
- partitions[7] = {.name = nvram, .offset = 0x007b0000,.size = 0x00050000 (320K) }
- Creating 8 MTD partitions on "spansion":
- 0x00000000-0x00020000 : "U-Boot"
- 0x00020000-0x00030000 : "env1"
- 0x00030000-0x00040000 : "env2"
- 0x00040000-0x003f0000 : "UBFI1"
- 0x003f0000-0x007a0000 : "UBFI2"
- 0x00041134-0x0010ec00 : "Kernel"
- mtd: partition "Kernel" doesn't start on an erase block boundary -- force read-only
- 0x0010ec00-0x0031f400 : "RootFileSystem"
- mtd: partition "RootFileSystem" doesn't start on an erase block boundary -- force read-only
- 0x007b0000-0x00800000 : "nvram"
- Serial Flash [Bus:0 CS:1] : No device found
- ti_spi.0: AVALANCHE SPI Controller driver at 0xd8612500 (irq = 0)
- ti_codec_spi.0: TI Codec SPI Controller driver at 0xd86040c8 (irq = 0)
- ether gadget: using random host ethernet address
- usb0: Ethernet Gadget, version: May 2007
- usb0: using musb_hdrc, OUT ep1out IN ep1in STATUS ep2in
- usb0: MAC 00:00:ca:00:00:03
- usb0: HOST MAC 6e:0e:d1:6f:a8:86
- usb0: VendorID 09c1
- usb0: ProductID 1337
- usb0: RNDIS ready
- TCP bic registered
- Initializing XFRM netlink socket
- NET: Registered protocol family 1
- NET: Registered protocol family 10
- IPv6 over IPv4 tunneling driver
- NET: Registered protocol family 17
- NET: Registered protocol family 15
- VFS: Mounted root (squashfs filesystem) readonly.
- Freeing init memory: 76K
- init started: BusyBox v1.4.2 (2010-10-08 17:57:02 EDT) multi-call binary
- init started: BusyBox v1.4.2 (2010-10-08 17:57:02 EDT) multi-call binary
- Starting pid 123, console /dev/tts/0: '/bin/sh'
- ========================================================
- ARRIS Touchstone Docsis 3.0 Firmware
- Build release TS0701103_100810_WBM_7
- Build date: Friday, October 08 2010, 17:57:48
- Copyright (c) 2007 - 2009 ARRIS Group Inc.
- ========================================================
- Running /etc/scripts/z_arris_check.sh...
- Running /etc/scripts/sys_check.sh...
- ----------------------------------------------------------
- Enable_Startup = 1
- Startup_File = /etc/scripts/sys_startup.sh
- ----------------------------------------------------------
- Using DOCSIS Initialization process parameters: -ds_channels 4 -us_channels 4
- Starting pid 219, console /dev/tts/0: '/usr/sbin/mini_cli'
- Delaying mini_cli execution until init complete
- pcd: Starting TI Process Control Daemon.
- pcd: Loaded 51 rules.
- pcd: Initialization complete.
- pcd: Starting process /usr/sbin/watchdog_rt (Rule SYSTEM_WATCHDOG).
- pcd: Starting process /usr/sbin/logger (Rule SYSTEM_LOGGER).
- pcd: Rule SYSTEM_WATCHDOG: Success (Process /usr/sbin/watchdog_rt (220)).
- TI Watchdog-RT daemon started <kick interval = 10 seconds>
- TI Logger: Init complete
- pcd: Rule SYSTEM_LOGGER: Success (Process /usr/sbin/logger (221)).
- pcd: Starting process /usr/sbin/gptimer (Rule SYSTEM_GPTIMER).
- [INFO] [COMMON_COMPONENTS.GPTIMER(pid=222)]: Initialized successfully, timer tick 50ms
- pcd: Rule SYSTEM_GPTIMER: Success (Process /usr/sbin/gptimer (222)).
- pcd: Rule SYSTEM_LASTRULE: Success.
- pcd: Starting process echo (Rule DOCSIS_APPRUN).
- pcd: Rule DOCSIS_APPRUN: Success (Process echo (224)).
- pcd: Starting process /usr/sbin/docsis_init_once (Rule DOCSIS_INITONCE).
- pcd: Starting process insmod (Rule DOCSIS_BRIDGE).
- Dbridge MDF control init done
- pcd: Rule DOCSIS_BRIDGE: Success (Process insmod (226)).
- pcd: Starting process insmod (Rule DOCSIS_CNI).
- pcd: Rule DOCSIS_CNI: Success (Process insmod (228)).
- pcd: Setting low priority for softirq-net-rx task.
- pcd: Rule DOCSIS_INITONCE: Success (Process /usr/sbin/docsis_init_once (225)).
- pcd: Starting process insmod (Rule DOCSIS_HALVLYNQ).
- pcd: Starting process /usr/sbin/cm_status (Rule DOCSIS_CMSTATUS).
- VLYNQ driver initialization complete.
- pcd: Rule DOCSIS_HALVLYNQ: Success (Process insmod (233)).
- pcd: Starting process insmod (Rule DOCSIS_SOCIFDRV).
- pcd: Rule DOCSIS_CMSTATUS: Success (Process /usr/sbin/cm_status (234)).
- pcd: Rule DOCSIS_SOCIFDRV: Success (Process insmod (237)).
- pcd: Starting process mknod (Rule DOCSIS_MKNODSOCIFDRV).
- pcd: Rule DOCSIS_MKNODSOCIFDRV: Success (Process mknod (239)).
- pcd: Starting process insmod (Rule DOCSIS_MNG).
- pcd: Rule DOCSIS_MNG: Success (Process insmod (240)).
- pcd: Starting process mknod (Rule DOCSIS_MKNODMNG).
- pcd: Starting process insmod (Rule DOCSIS_KINTR).
- pcd: Rule DOCSIS_MKNODMNG: Success (Process mknod (242)).
- pcd: Starting process insmod (Rule DOCSIS_FILTERCLASS).
- pcd: Rule DOCSIS_KINTR: Success (Process insmod (243)).
- pcd: Starting process /usr/sbin/hal_event_mbox (Rule DOCSIS_HALEVENTMBOX).
- pcd: Starting process /usr/sbin/hal_cmd_mbox (Rule DOCSIS_HALCMDMBOX).
- pcd: Rule DOCSIS_FILTERCLASS: Success (Process insmod (246)).
- pcd: Starting process /bin/sh (Rule DOCSIS_FCDEV).
- pcd: Rule DOCSIS_HALCMDMBOX: Success (Process /usr/sbin/hal_cmd_mbox (253)).
- pcd: Rule DOCSIS_HALEVENTMBOX: Success (Process /usr/sbin/hal_event_mbox (252)).
- pcd: Starting process /usr/sbin/mlx (Rule DOCSIS_MLX).
- pcd: Rule DOCSIS_FCDEV: Success (Process /bin/sh (255)).
- pcd: Rule DOCSIS_MLX: Success (Process /usr/sbin/mlx (261)).
- pcd: Starting process /usr/sbin/hal_tuner_mgr (Rule DOCSIS_HALTUNERMGR).
- pcd: Starting process /usr/sbin/dbridge_init (Rule DOCSIS_DBRIDGEINIT).
- pcd: Rule DOCSIS_HALTUNERMGR: Success (Process /Ingress Hook on eth0
- usr/sbin/hal_tunIngress Hook on eth0
- er_mgr (268)).
- Dbridge Init SUCCESS
- Autoconfiguration disabled for br0
- HAL_MacDsUnicastDataFilterAdd: system_rev = 1
- HAL_MacDsUnicastDataFilterAdd: system_rev = 1
- Autoconfiguration disabled for lbr0
- HAL_MacDsUnicastDataFilterAdd: system_rev = 1
- HAL_MacDsUnicastDataFilterAdd: system_rev = 1
- Autoconfiguration disabled for lan0
- Autoconfiguration disabled for wan0
- HAL_MacDsUnicastDataFilterAdd: system_rev = 1
- HAL_MacDsUnicastDataFilterAdd: system_rev = 1
- Autoconfiguration disabled for cni0
- pcd: Rule DOCSIS_DBRIDGEINIT: Success (Process /usr/sbin/dbridge_init (269)).
- pcd: Starting process /bin/sh (Rule DOCSIS_DBRIDGEMDFINIT).
- pcd: Rule DOCSIS_HALREADY: Success.
- pcd: Starting process /usr/sbin/arris_init (Rule DOCSIS_ARRIS_INIT).
- pcd: Starting process /usr/sbin/dispatcher (Rule DOCSIS_DISPATCHER).
- pcd: Starting process /usr/sbin/bpi_auth (Rule DOCSIS_BPIAUTH).
- netlink_open: initialized fd 6
- pcd: Rule DOCSIS_DISPATCHER: Success (Process /usr/sbin/dispatcher (282)).
- pcd: Rule DOCSIS_BPIAUTH: Success (Process /usr/sbin/bpi_auth (283)).
- pcd: Starting process /usr/sbin/bpi_tek (Rule DOCSIS_BPITEK).
- pcd: Starting process /usr/sbin/bpi_sa_map (Rule DOCSIS_BPISAMAP).
- [INFO] [ARRIS.INIT(pid=281)]: ************** ARRIS Init ***************
- [INFO] [ARRIS.NVM(pid=281)]: NV Memory Manager Initialization complete
- [INFO] [ARRIS.DB(pid=281)]: Database Manager Initialization complete
- [ERROR] [ARRIS.DB(pid=281)]: NCS_LOG_DB_ERR_INVALID_DB_HANDLE
- [INFO] [ARRIS.DB(pid=281)]: ARRIS NCS LOG Database Member Initialization complete
- [INFO] [ARRIS.DB(pid=281)]: ARRIS NCS LOG Database Manager Initialization complete
- [INFO] [ARRIS.INIT(pid=281)]: **************** App Mode ***************
- pcd: Rule DOCSIS_DBRIDGEMDFINIT: Success (Process /bin/sh (279)).
- pcd: Starting process insmod (Rule DOCSIS_PP).
- Create DOCSIS Packet Processor counters char device done
- Init Docsis Packet Processor counters DB done.
- DOCSIS Packet Processor counters control init done
- DOCSIS Packet Processor control init done
- pcd: Rule DOCSIS_PP: Success (Process insmod (294)).
- pcd: Starting process /bin/sh (Rule DOCSIS_PPDEV).
- pcd: Rule DOCSIS_ARRIS_INIT: Success (Process /usr/sbin/arris_init (281)).
- pcd: Starting process /usr/sbin/snmp_agent_cm (Rule DOCSIS_SNMPAGENT).
- pcd: Starting process /usr/sbin/qos_dsx_sm (Rule DOCSIS_QOSDSXSM).
- pcd: Starting process /usr/sbin/docsis_mac_driver (Rule DOCSIS_MACDRIVER).
- pcd: Starting process /usr/sbin/ti_webserver (Rule DOCSIS_ARRIS_WEBSERVER).
- pcd: Starting process /usr/sbin/ledd (Rule DOCSIS_ARRIS_LED).
- pcd: Rule DOCSIS_ARRIS_LED: Success (Process /usr/sbin/ledd (303)).
- pcd: Rule DOCSIS_ARRIS_WEBSERVER: Success (Process /usr/sbin/ti_webserver (302)).
- pcd: Starting process /sbin/udhcpd (Rule DOCSIS_ARRIS_DHCP_SERV).
- pcd: Rule DOCSIS_ARRIS_DHCP_SERV: Success (Process /sbin/udhcpd (304)).
- pcd: Rule DOCSIS_BPISAMAP: Success (Process /usr/sbin/bpi_sa_map (290)).
- [INFO] [ARRIS.INIT(pid=281)]: Embedded bootrev 1.2.1.25 not newer than existing rev
- [INIT] [ARRIS.RF_SCAN(pid=281)]: Initializing RF frequency scanner
- [INFO] [ARRIS.RF(pid=281)]: RF Initialization complete
- [INFO] [ARRIS.INIT(pid=281)]: ************** USB Disabled *************
- [INFO] [ARRIS.INIT(pid=281)]: ********* ARRIS Init Complete **********
- pcd: Rule DOCSIS_BPITEK: Success (Process /usr/sbin/bpi_tek (289)).
- pcd: Rule DOCSIS_PPDEV: Success (Process /bin/sh (296)).
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement