Omegamoon >> Radxa bootlog 3.19.0

Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpu
Linux version 3.19.0 (egoe@omegamoon-dev) (gcc version 4.9.3 20141031 (prerelease) (Linaro GCC 2014.11) ) #2 SMP Thu Feb 19 12:28:27 CET 2015
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Radxa Rock
bootconsole [earlycon0] enabled
Memory policy: Data cache writealloc
On node 0 totalpages: 520192
free_area_init_node: node 0, pgdat c08e6d40, node_mem_map ee818000
  Normal zone: 1520 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 194560 pages, LIFO batch:31
  HighMem zone: 325632 pages, LIFO batch:31
PERCPU: Embedded 10 pages/cpu @ee7d5000 s11712 r8192 d21056 u40960
pcpu-alloc: s11712 r8192 d21056 u40960 alloc=10*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 518672
Kernel command line: console=tty0 console=ttyS2,115200 debug earlyprintk root=/dev/mmcblk0p1 rootwait pause_on_oops=20 panic=10 rootfstype=ext4 loglevel=8 rw init=/init mtdparts=rk29xxnand:0x00008000@0x00002000(boot),-@0x0000A000(linuxroot)
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2053848K/2080768K available (6200K kernel code, 460K rwdata, 2132K rodata, 416K init, 335K bss, 26920K reserved, 0K cma-reserved, 1302528K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
    lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc082b494   (8334 kB)
      .init : 0xc082c000 - 0xc0894000   ( 416 kB)
      .data : 0xc0894000 - 0xc0907040   ( 461 kB)
       .bss : 0xc0907040 - 0xc095b000   ( 336 kB)
Hierarchical RCU implementation.
	Additional per-CPU info printed with stalls.
NR_IRQS:16 nr_irqs:16 16
L2C-310 enabling early BRESP for Cortex-A9
L2C-310: enabling full line of zeros but not enabled in Cortex-A9
L2C-310 ID prefetch enabled, offset 15 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 16 ways, 512 kB
L2C-310: CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001
sched_clock: 64 bits at 150MHz, resolution 6ns, wraps every 1832519401472ns
Console: colour dummy device 80x30
console [tty0] enabled
Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Initializing cgroup subsys freezer
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
rockchip_smp_prepare_cpus: ncores 4
Setting up static identity map for 0x605e7df8 - 0x605e7e50
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Brought up 4 CPUs
SMP: Total of 4 processors activated (4787.40 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor ladder
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
otg-vbus: 5000 mV
reg-fixed-voltage usb-otg-regulator: otg-vbus supplying 5000000uV
sdmmc-supply: 3300 mV
reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
reg-fixed-voltage sdmmc-regulator: Failed to find supply vin
reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517
platform sdmmc-regulator: Driver reg-fixed-voltage requests probe deferral
host-pwr: 5000 mV
reg-fixed-voltage usb-host-regulator: host-pwr supplying 5000000uV
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
NET: Registered protocol family 23
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
Switched to clocksource arm_global_timer
simple-framebuffer df000000.framebuffer: framebuffer at 0xdf000000, 0x384000 bytes, mapped to 0xf0400000
simple-framebuffer df000000.framebuffer: format=x8r8g8b8, mode=1280x720x32, linelength=5120
Console: switching to colour frame buffer device 160x45
simple-framebuffer df000000.framebuffer: fb0: simplefb registered!
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
rknandbase v1.0 2014-03-31
rknand_driver:ret = 0
futex hash table entries: 1024 (order: 4, 65536 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
fuse init (API version 7.23)
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered (default)
dma-pl330 20018000.dma-controller: Loaded driver for PL330 DMAC-241330
dma-pl330 20018000.dma-controller: 	DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
dma-pl330 20078000.dma-controller: Loaded driver for PL330 DMAC-241330
dma-pl330 20078000.dma-controller: 	DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
10124000.serial: ttyS0 at MMIO 0x10124000 (irq = 22, base_baud = 1500000) is a 16550A
10126000.serial: ttyS1 at MMIO 0x10126000 (irq = 23, base_baud = 1500000) is a 16550A
console [ttyS2] disabled
20064000.serial: ttyS2 at MMIO 0x20064000 (irq = 32, base_baud = 1500000) is a 16550A
console [ttyS2] enabled
bootconsole [earlycon0] disabled
20068000.serial: ttyS3 at MMIO 0x20068000 (irq = 33, base_baud = 1500000) is a 16550A
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
rockchip_emac 10204000.ethernet: Looking up phy-supply from device tree
platform 10204000.ethernet: Driver rockchip_emac requests probe deferral
usbcore: registered new interface driver asix
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver cdc_eem
usbcore: registered new interface driver sr9700
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver cdc_ncm
dwc2 10180000.usb: registering common handler for irq24
dwc2 10180000.usb: mapped PA 10180000 to VA f0100000
dwc2 10180000.usb: no platform data or transceiver defined
platform 10180000.usb: Driver dwc2 requests probe deferral
dwc2 101c0000.usb: registering common handler for irq25
dwc2 101c0000.usb: mapped PA 101c0000 to VA f0180000
dwc2 101c0000.usb: no platform data or transceiver defined
platform 101c0000.usb: Driver dwc2 requests probe deferral
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
rk3x-i2c 2002d000.i2c: using default SCL frequency: 100000
rk3x-i2c 2002d000.i2c: Initialized RK3xxx I2C bus at f0096000
rtc-hym8563 1-0051: no valid clock/calendar values available
rtc-hym8563 1-0051: rtc core: registered hym8563 as rtc0
VCC_DDR: 1200 mV
VDD_LOG: 1000 mV
VDD_ARM: 875 <--> 1350 mV at 1000 mV
VCC_IO: 3300 mV
VDD_10: 1000 mV
VDD_HDMI: 2500 mV
VCC_18: 1800 mV
VCCA_33: 3300 mV
VCC_RMII: 3300 mV
VCCIO_WL: 3300 mV
VCC18_IO: 1800 mV
VCC_28: 2800 mV
rk3x-i2c 2002f000.i2c: Initialized RK3xxx I2C bus at f0098000
rk3x-i2c 20056000.i2c: using default SCL frequency: 100000
rk3x-i2c 20056000.i2c: Initialized RK3xxx I2C bus at f009a000
lirc_dev: IR Remote Control driver registered, major 250
IR NEC protocol handler initialized
IR RC5(x/sz) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR SANYO protocol handler initialized
IR Sharp protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
IR LIRC bridge handler initialized
IR XMP protocol handler initialized
Registered IR keymap rc-empty
input: gpio_ir_recv as /devices/platform/gpio-ir-receiver/rc/rc0/input0
rc0: gpio_ir_recv as /devices/platform/gpio-ir-receiver/rc/rc0
input: MCE IR Keyboard/Mouse (gpio-rc-recv) as /devices/virtual/input/input1
rc rc0: lirc_dev: driver ir-lirc-codec (gpio-rc-recv) registered at minor = 0
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
gspca_main: v2.14.0 registered
usbcore: registered new interface driver em28xx
em28xx: Registered (Em28xx v4l2 Extension) extension
em28xx: Registered (Em28xx Input Extension) extension
softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI Three-wire UART (H5) protocol initialized
usbcore: registered new interface driver btusb
Bluetooth: Generic Bluetooth SDIO driver ver 0.1
Driver 'mmcblk' needs updating - please use bus_type methods
Synopsys Designware Multimedia Card Interface Driver
dwmmc_rockchip 10214000.dwmmc: IDMAC supports 32-bit address mode.
dwmmc_rockchip 10214000.dwmmc: Using PIO mode.
dwmmc_rockchip 10214000.dwmmc: Version ID is 240a
dwmmc_rockchip 10214000.dwmmc: DW MMC controller at irq 27, 32 bit host data width, 256 deep fifo
dwmmc_rockchip 10214000.dwmmc: Looking up vmmc-supply from device tree
dwmmc_rockchip 10214000.dwmmc: Looking up vqmmc-supply from device tree
dwmmc_rockchip 10214000.dwmmc: Looking up vqmmc-supply property in node /dwmmc@10214000 failed
platform 10214000.dwmmc: Driver dwmmc_rockchip requests probe deferral
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
rockchip-saradc 2006c000.saradc: Looking up vref-supply from device tree
rockchip-saradc 2006c000.saradc: Looking up vref-supply property in node /saradc@2006c000 failed
2006c000.saradc supply vref not found, using dummy regulator
TCP: cubic registered
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
Key type dns_resolver registered
Registering SWP/SWPB emulation handler
sdmmc-supply: 3300 mV
reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
sdmmc-supply: supplied by VCC_IO
reg-fixed-voltage sdmmc-regulator: sdmmc-supply supplying 3300000uV
rockchip_emac 10204000.ethernet: Looking up phy-supply from device tree
rockchip_emac 10204000.ethernet: ARC EMAC detected with id: 0x7fd02
rockchip_emac 10204000.ethernet: IRQ is 26
rockchip_emac 10204000.ethernet: MAC address is now 72:67:43:79:4b:69
libphy: Synopsys MII Bus: probed
rockchip_emac 10204000.ethernet: connected to SMSC LAN8710/LAN8720 phy with id 0x7c0f1
dwc2 10180000.usb: registering common handler for irq24
dwc2 10180000.usb: mapped PA 10180000 to VA f0200000
dwc2 10180000.usb: no platform data or transceiver defined
platform 10180000.usb: Driver dwc2 requests probe deferral
dwc2 101c0000.usb: registering common handler for irq25
dwc2 101c0000.usb: mapped PA 101c0000 to VA f0280000
dwc2 101c0000.usb: no platform data or transceiver defined
platform 101c0000.usb: Driver dwc2 requests probe deferral
dwmmc_rockchip 10214000.dwmmc: IDMAC supports 32-bit address mode.
dwmmc_rockchip 10214000.dwmmc: Using PIO mode.
dwmmc_rockchip 10214000.dwmmc: Version ID is 240a
dwmmc_rockchip 10214000.dwmmc: DW MMC controller at irq 27, 32 bit host data width, 256 deep fifo
dwmmc_rockchip 10214000.dwmmc: Looking up vmmc-supply from device tree
dwmmc_rockchip 10214000.dwmmc: Looking up vqmmc-supply from device tree
dwmmc_rockchip 10214000.dwmmc: Looking up vqmmc-supply property in node /dwmmc@10214000 failed
dwmmc_rockchip 10214000.dwmmc: No vqmmc regulator found
dwmmc_rockchip 10214000.dwmmc: 1 slots initialized
dwc2 10180000.usb: registering common handler for irq24
dwc2 10180000.usb: mapped PA 10180000 to VA f0300000
dwc2 10180000.usb: no platform data or transceiver defined
platform 10180000.usb: Driver dwc2 requests probe deferral
dwc2 101c0000.usb: registering common handler for irq25
dwc2 101c0000.usb: mapped PA 101c0000 to VA f0380000
dwc2 101c0000.usb: no platform data or transceiver defined
platform 101c0000.usb: Driver dwc2 requests probe deferral
input: gpio-keys as /devices/platform/gpio-keys/input/input2
rtc-hym8563 1-0051: no valid clock/calendar values available
dwc2 10180000.usb: registering common handler for irq24
dwc2 10180000.usb: mapped PA 10180000 to VA f0800000
dwc2 10180000.usb: no platform data or transceiver defined
platform 10180000.usb: Driver dwc2 requests probe deferral
dwc2 101c0000.usb: registering common handler for irq25
dwc2 101c0000.usb: mapped PA 101c0000 to VA f0880000
dwc2 101c0000.usb: no platform data or transceiver defined
platform 101c0000.usb: Driver dwc2 requests probe deferral
rtc-hym8563 1-0051: hctosys: unable to read the hardware clock
mmc_host mmc0: Bus speed (slot 0) = 31821429Hz (slot req 25000000Hz, actual 15910714HZ div = 1)
mmc0: new SDHC card at address e624
Waiting for root device /dev/mmcblk0p1...
mmcblk0: mmc0:e624 SU32G 29.7 GiB
 mmcblk0: p1 p2
dwc2 10180000.usb: registering common handler for irq24
dwc2 10180000.usb: mapped PA 10180000 to VA f0900000
dwc2 10180000.usb: no platform data or transceiver defined
platform 10180000.usb: Driver dwc2 requests probe deferral
dwc2 101c0000.usb: registering common handler for irq25
dwc2 101c0000.usb: mapped PA 101c0000 to VA f0980000
dwc2 101c0000.usb: no platform data or transceiver defined
platform 101c0000.usb: Driver dwc2 requests probe deferral
EXT4-fs (mmcblk0p1): recovery complete
EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:1.
devtmpfs: mounted
Freeing unused kernel memory: 416K (c082c000 - c0894000)
Failed to execute /init (error -2).  Attempting defaults...
random: nonblocking pool is initialized
init: plymouth-upstart-bridge main process (68) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (77) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (81) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
systemd-udevd[176]: starting version 204
init: failsafe main process (411) killed by TERM signal
init: alsa-restore main process (679) terminated with status 19
init: isc-dhcp-server main process (675) terminated with status 1
init: isc-dhcp-server main process ended, respawning
init: plymouth-upstart-bridge main process ended, respawning
rtc-hym8563 1-0051: no valid clock/calendar values available
rtc-hym8563 1-0051: no valid clock/calendar values available
init: isc-dhcp-server main process (722) terminated with status 1
init: isc-dhcp-server main process ended, respawning
init: isc-dhcp-server main process (740) terminated with status 1
init: isc-dhcp-server main process ended, respawning
init: isc-dhcp-server main process (751) terminated with status 1
init: isc-dhcp-server main process ended, respawning
rockchip_emac 10204000.ethernet eth0: Link is Down
rtc-hym8563 1-0051: no valid clock/calendar values available
init: isc-dhcp-server main process (766) terminated with status 1
init: isc-dhcp-server main process ended, respawning
init: isc-dhcp-server main process (775) terminated with status 1
init: isc-dhcp-server main process ended, respawning
init: isc-dhcp-server main process (788) terminated with status 1
init: isc-dhcp-server main process ended, respawning
init: isc-dhcp-server main process (796) terminated with status 1
init: isc-dhcp-server main process ended, respawning
rtc-hym8563 1-0051: no valid clock/calendar values available
init: isc-dhcp-server main process (804) terminated with status 1
init: isc-dhcp-server main process ended, respawning
init: isc-dhcp-server main process (812) terminated with status 1
init: isc-dhcp-server main process ended, respawning
init: isc-dhcp-server main process (820) terminated with status 1
init: isc-dhcp-server respawning too fast, stopped
rtc-hym8563 1-0051: no valid clock/calendar values available
rockchip_emac 10204000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
init: plymouth-stop pre-start process (897) terminated with status 1
rtc-hym8563 1-0051: no valid clock/calendar values available
init: tty1 main process (900) killed by TERM signal
rtc-hym8563 1-0051: no valid clock/calendar values available
rtc-hym8563 1-0051: no valid clock/calendar values available
rtc-hym8563 1-0051: no valid clock/calendar values available
rtc-hym8563 1-0051: no valid clock/calendar values available
rtc-hym8563 1-0051: no valid clock/calendar values available
rtc-hym8563 1-0051: no valid clock/calendar values available
rtc-hym8563 1-0051: no valid clock/calendar values available
rtc-hym8563 1-0051: no valid clock/calendar values available
rtc-hym8563 1-0051: no valid clock/calendar values available
rtc-hym8563 1-0051: no valid clock/calendar values available
rtc-hym8563 1-0051: no valid clock/calendar values available
rtc-hym8563 1-0051: no valid clock/calendar values available
rtc-hym8563 1-0051: no valid clock/calendar values available
rtc-hym8563 1-0051: no valid clock/calendar values available
rtc-hym8563 1-0051: no valid clock/calendar values available
mmcblk0: error -110 sending status command, retrying
mmcblk0: error -115 sending stop command, original cmd response 0x900, card status 0x800c00
mmcblk0: error -110 transferring data, sector 29362320, nr 8, cmd response 0x900, card status 0xc00
blk_update_request: I/O error, dev mmcblk0, sector 29362320
Buffer I/O error on dev mmcblk0p1, logical block 3670034, lost async page write
mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0x900
mmcblk0: error -84 transferring data, sector 16780416, nr 8, cmd response 0x900, card status 0xc00
blk_update_request: I/O error, dev mmcblk0, sector 16780416
Buffer I/O error on dev mmcblk0p1, logical block 2097296, lost async page write