Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Linux version 2.6.18-194.17.1.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Wed Sep 29 12:50:31 EDT 2010
- Command line: ro root=LABEL=/1 rhgb quiet
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000010000 - 0000000000099c00 (usable)
- BIOS-e820: 0000000000099c00 - 00000000000a0000 (reserved)
- BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
- BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 00000000e7e90000 (usable)
- BIOS-e820: 00000000e7e90000 - 00000000e7ea5000 (reserved)
- BIOS-e820: 00000000e7ea5000 - 00000000e7ea6000 (ACPI NVS)
- BIOS-e820: 00000000e7ea6000 - 00000000e8000000 (reserved)
- BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)
- BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
- BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
- BIOS-e820: 0000000100000000 - 0000000110000000 (usable)
- DMI present.
- ACPI: RSDP (v002 HP ) @ 0x00000000000f73d0
- ACPI: XSDT (v001 HP ProLiant 0x06040000 LTP 0x00000000) @ 0x00000000e7e9caee
- ACPI: FADT (v003 HP ProLiant 0x06040000 PTL 0x00000002) @ 0x00000000e7ea46bb
- ACPI: SPMI (v005 HP ProLiant 0x06040000 PTL 0x00000001) @ 0x00000000e7ea47af
- ACPI: EINJ (v001 HP ProLiant 0x06040000 PTL 0x00000001) @ 0x00000000e7ea47ef
- ACPI: HEST (v001 HP ProLiant 0x06040000 PTL 0x00000001) @ 0x00000000e7ea499f
- ACPI: BERT (v001 HP ProLiant 0x06040000 PTL 0x00000001) @ 0x00000000e7ea4b47
- ACPI: SSDT (v001 HP ProLiant 0x06040000 INTL 0x20050624) @ 0x00000000e7ea4b77
- ACPI: ERST (v001 HP ProLiant 0x06040000 PTL 0x00000001) @ 0x00000000e7ea4c58
- ACPI: MCFG (v001 HP ProLiant 0x06040000 LTP 0x00000000) @ 0x00000000e7ea4ec8
- ACPI: MADT (v001 HP ProLiant 0x06040000 LTP 0x00000000) @ 0x00000000e7ea4f04
- ACPI: BOOT (v001 HP ProLiant 0x06040000 LTP 0x00000001) @ 0x00000000e7ea4f88
- ACPI: SPCR (v001 HP ProLiant 0x06040000 PTL 0x00000001) @ 0x00000000e7ea4fb0
- ACPI: SSDT (v001 HP Cpu0Tst 0x00003000 INTL 0x20050228) @ 0x00000000e7e9e02d
- ACPI: SSDT (v001 HP Cpu1Tst 0x00003000 INTL 0x20050228) @ 0x00000000e7e9df87
- ACPI: SSDT (v001 HP CpuPm 0x00003000 INTL 0x20050228) @ 0x00000000e7e9cb82
- ACPI: DSDT (v001 HP ProLiant 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000
- No NUMA configuration found
- Faking a node at 0000000000000000-0000000110000000
- Bootmem setup node 0 0000000000000000-0000000110000000
- Memory for crash kernel (0x0 to 0x0) notwithin permissible range
- disabling kdump
- On node 0 totalpages: 998784
- DMA zone: 2616 pages, LIFO batch:0
- DMA32 zone: 931528 pages, LIFO batch:31
- Normal zone: 64640 pages, LIFO batch:15
- ACPI: PM-Timer IO Port: 0x1008
- ACPI: Local APIC address 0xfee00000
- ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- Processor #0 6:15 APIC version 20
- ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
- Processor #1 6:15 APIC version 20
- ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
- Processor #2 6:15 APIC version 20
- ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
- Processor #3 6:15 APIC version 20
- ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
- ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
- ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
- IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
- ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
- ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- ACPI: IRQ0 used by override.
- ACPI: IRQ2 used by override.
- ACPI: IRQ9 used by override.
- Setting APIC routing to physical flat
- Using ACPI (MADT) for SMP configuration information
- Nosave address range: 0000000000099000 - 000000000009a000
- Nosave address range: 000000000009a000 - 00000000000a0000
- Nosave address range: 00000000000a0000 - 00000000000dc000
- Nosave address range: 00000000000dc000 - 00000000000e0000
- Nosave address range: 00000000000e0000 - 00000000000e4000
- Nosave address range: 00000000000e4000 - 0000000000100000
- Nosave address range: 00000000e7e90000 - 00000000e7ea5000
- Nosave address range: 00000000e7ea5000 - 00000000e7ea6000
- Nosave address range: 00000000e7ea6000 - 00000000e8000000
- Nosave address range: 00000000e8000000 - 00000000f0000000
- Nosave address range: 00000000f0000000 - 00000000f8000000
- Nosave address range: 00000000f8000000 - 00000000fec00000
- Nosave address range: 00000000fec00000 - 00000000fec10000
- Nosave address range: 00000000fec10000 - 00000000fee00000
- Nosave address range: 00000000fee00000 - 00000000fee01000
- Nosave address range: 00000000fee01000 - 00000000ff000000
- Nosave address range: 00000000ff000000 - 0000000100000000
- Allocating PCI resources starting at e8800000 (gap: e8000000:8000000)
- SMP: Allowing 4 CPUs, 0 hotplug CPUs
- Built 1 zonelists. Total pages: 998784
- Kernel command line: ro root=LABEL=/1 rhgb quiet
- Initializing CPU#0
- PID hash table entries: 4096 (order: 12, 32768 bytes)
- Console: colour VGA+ 80x25
- Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- Checking aperture...
- ACPI: DMAR not present
- PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- Placing software IO TLB between 0x163c000 - 0x563c000
- Memory: 3919872k/4456448k available (2574k kernel code, 141412k reserved, 1304k data, 212k init)
- Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.13 BogoMIPS (lpj=2394069)
- Security Framework v1.0.0 initialized
- SELinux: Initializing.
- SELinux: Starting in permissive mode
- selinux_register_security: Registering secondary module capability
- Capability LSM initialized as secondary
- Mount-cache hash table entries: 256
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 4096K
- using mwait in idle threads.
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 0
- CPU0: Thermal monitoring handled by SMI
- SMP alternatives: switching to UP code
- ACPI: Core revision 20060707
- Using local APIC timer interrupts.
- Detected 16.625 MHz APIC timer.
- SMP alternatives: switching to SMP code
- Booting processor 1/4 APIC 0x1
- Initializing CPU#1
- Calibrating delay using timer specific routine.. 4787.36 BogoMIPS (lpj=2393684)
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 4096K
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 1
- CPU1: Thermal monitoring enabled (TM2)
- Intel(R) Xeon(R) CPU X3220 @ 2.40GHz stepping 0b
- CPU 1: Syncing TSC to CPU 0.
- CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 342 cycles)
- SMP alternatives: switching to SMP code
- Booting processor 2/4 APIC 0x2
- Initializing CPU#2
- Calibrating delay using timer specific routine.. 4787.32 BogoMIPS (lpj=2393660)
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 4096K
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 2
- CPU2: Thermal monitoring enabled (TM2)
- Intel(R) Xeon(R) CPU X3220 @ 2.40GHz stepping 0b
- CPU 2: Syncing TSC to CPU 0.
- CPU 2: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 594 cycles)
- SMP alternatives: switching to SMP code
- Booting processor 3/4 APIC 0x3
- Initializing CPU#3
- Calibrating delay using timer specific routine.. 4787.38 BogoMIPS (lpj=2393691)
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 4096K
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 3
- CPU3: Thermal monitoring enabled (TM2)
- Intel(R) Xeon(R) CPU X3220 @ 2.40GHz stepping 0b
- CPU 3: Syncing TSC to CPU 0.
- CPU 3: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 594 cycles)
- Brought up 4 CPUs
- testing NMI watchdog ... OK.
- Disabling vsyscall due to use of PM timer
- time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
- time.c: Detected 2394.069 MHz processor.
- sizeof(vma)=176 bytes
- sizeof(page)=56 bytes
- sizeof(inode)=560 bytes
- sizeof(dentry)=216 bytes
- sizeof(ext3inode)=760 bytes
- sizeof(buffer_head)=96 bytes
- sizeof(skbuff)=248 bytes
- migration_cost=10,4395
- checking if image is initramfs... it is
- Freeing initrd memory: 2632k freed
- NET: Registered protocol family 16
- ACPI: bus type pci registered
- PCI: Using MMCONFIG at f0000000
- ACPI: Interpreter enabled
- ACPI: Using IOAPIC for interrupt routing
- ACPI: No dock devices found.
- ACPI: PCI Root Bridge [PCI0] (0000:00)
- PCI: Transparent bridge - 0000:00:1e.0
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
- ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- Linux Plug and Play Support v0.97 (c) Adam Belay
- pnp: PnP ACPI init
- pnp: PnP ACPI: found 10 devices
- usbcore: registered new driver usbfs
- usbcore: registered new driver hub
- PCI: Using ACPI for IRQ routing
- PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
- PCI: Cannot allocate resource region 7 of bridge 0000:00:01.0
- PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
- NetLabel: Initializing
- NetLabel: domain hash size = 128
- NetLabel: protocols = UNLABELED CIPSOv4
- NetLabel: unlabeled traffic allowed by default
- ACPI: DMAR not present
- PCI-GART: No AMD northbridge found.
- PCI: Bridge: 0000:00:01.0
- IO window: disabled.
- MEM window: disabled.
- PREFETCH window: disabled.
- PCI: Bridge: 0000:00:1c.0
- IO window: disabled.
- MEM window: disabled.
- PREFETCH window: disabled.
- PCI: Bridge: 0000:00:1c.4
- IO window: disabled.
- MEM window: ec100000-ecffffff
- PREFETCH window 0x00000000ee000000-0x00000000eeffffff
- PCI: Bridge: 0000:00:1c.5
- IO window: disabled.
- MEM window: ed000000-ed0fffff
- PREFETCH window: disabled.
- PCI: Bridge: 0000:00:1e.0
- IO window: disabled.
- MEM window: disabled.
- PREFETCH window: disabled.
- GSI 16 sharing vector 0xA9 and IRQ 16
- ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
- PCI: Setting latency timer of device 0000:00:01.0 to 64
- ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
- PCI: Setting latency timer of device 0000:00:1c.0 to 64
- ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169
- PCI: Setting latency timer of device 0000:00:1c.4 to 64
- GSI 17 sharing vector 0xB1 and IRQ 17
- ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 177
- PCI: Setting latency timer of device 0000:00:1c.5 to 64
- PCI: Setting latency timer of device 0000:00:1e.0 to 64
- NET: Registered protocol family 2
- IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
- TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
- TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- TCP: Hash tables configured (established 262144 bind 65536)
- TCP reno registered
- Simple Boot Flag at 0x44 set to 0x1
- audit: initializing netlink socket (disabled)
- type=2000 audit(1287143472.808:1): initialized
- Total HugeTLB memory allocated, 0
- VFS: Disk quotas dquot_6.5.1
- Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- SELinux: Registering netfilter hooks
- Initializing Cryptographic API
- alg: No test for crc32c (crc32c-generic)
- ksign: Installing public key data
- Loading keyring
- - Added public key 565662CFF69DD0BE
- - User ID: CentOS (Kernel Module GPG key)
- io scheduler noop registered
- io scheduler anticipatory registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- Boot video device is 0000:0d:00.0
- PCI: Setting latency timer of device 0000:00:01.0 to 64
- PCI: Setting latency timer of device 0000:00:1c.0 to 64
- PCI: Setting latency timer of device 0000:00:1c.4 to 64
- PCI: Setting latency timer of device 0000:00:1c.5 to 64
- pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- ACPI (exconfig-0456): Dynamic SSDT Load - OemId [HP ] OemTableId [ Cpu0Ist] [20060707]
- ACPI: Processor [CPU0] (supports 8 throttling states)
- ACPI (exconfig-0456): Dynamic SSDT Load - OemId [HP ] OemTableId [ Cpu1Ist] [20060707]
- ACPI: Processor [CPU1] (supports 8 throttling states)
- ACPI (exconfig-0456): Dynamic SSDT Load - OemId [HP ] OemTableId [ Cpu2Ist] [20060707]
- ACPI (exconfig-0456): Dynamic SSDT Load - OemId [HP ] OemTableId [ Cpu3Ist] [20060707]
- Real Time Clock Driver v1.12ac
- Non-volatile memory driver v1.2
- Linux agpgart interface v0.101 (c) Dave Jones
- Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
- serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- brd: module loaded
- Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
- ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
- Probing IDE interface ide0...
- Probing IDE interface ide1...
- ide-floppy driver 0.99.newide
- usbcore: registered new driver hiddev
- usbcore: registered new driver usbhid
- drivers/usb/input/hid-core.c: v2.6:USB HID core driver
- PNP: No PS/2 controller found. Probing ports directly.
- serio: i8042 KBD port at 0x60,0x64 irq 1
- mice: PS/2 mouse device common for all mice
- md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
- md: bitmap version 4.39
- TCP bic registered
- Initializing IPsec netlink socket
- NET: Registered protocol family 1
- NET: Registered protocol family 17
- ACPI: (supports S0 S1 S4 S5)
- Initalizing network drop monitor service
- Freeing unused kernel memory: 212k freed
- Write protecting the kernel read-only data: 504k
- GSI 18 sharing vector 0xE1 and IRQ 18
- ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 225
- PCI: Setting latency timer of device 0000:00:1a.7 to 64
- ehci_hcd 0000:00:1a.7: EHCI Host Controller
- ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
- ehci_hcd 0000:00:1a.7: debug port 1
- PCI: cache line size of 32 is not supported by device 0000:00:1a.7
- ehci_hcd 0000:00:1a.7: irq 225, io mem 0xec000000
- ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
- usb usb1: configuration #1 chosen from 1 choice
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 6 ports detected
- ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 169
- PCI: Setting latency timer of device 0000:00:1d.7 to 64
- ehci_hcd 0000:00:1d.7: EHCI Host Controller
- ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
- ehci_hcd 0000:00:1d.7: debug port 1
- PCI: cache line size of 32 is not supported by device 0000:00:1d.7
- ehci_hcd 0000:00:1d.7: irq 169, io mem 0xec000400
- ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
- usb usb2: configuration #1 chosen from 1 choice
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 6 ports detected
- ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
- USB Universal Host Controller Interface driver v3.0
- ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 169
- PCI: Setting latency timer of device 0000:00:1a.0 to 64
- uhci_hcd 0000:00:1a.0: UHCI Host Controller
- uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
- uhci_hcd 0000:00:1a.0: irq 169, io base 0x00001820
- usb usb3: configuration #1 chosen from 1 choice
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 2 ports detected
- ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 177
- PCI: Setting latency timer of device 0000:00:1a.1 to 64
- uhci_hcd 0000:00:1a.1: UHCI Host Controller
- uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
- uhci_hcd 0000:00:1a.1: irq 177, io base 0x00001840
- usb usb4: configuration #1 chosen from 1 choice
- hub 4-0:1.0: USB hub found
- hub 4-0:1.0: 2 ports detected
- ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 225
- PCI: Setting latency timer of device 0000:00:1a.2 to 64
- uhci_hcd 0000:00:1a.2: UHCI Host Controller
- uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
- uhci_hcd 0000:00:1a.2: irq 225, io base 0x00001860
- usb usb5: configuration #1 chosen from 1 choice
- hub 5-0:1.0: USB hub found
- hub 5-0:1.0: 2 ports detected
- ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
- PCI: Setting latency timer of device 0000:00:1d.0 to 64
- uhci_hcd 0000:00:1d.0: UHCI Host Controller
- uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
- uhci_hcd 0000:00:1d.0: irq 169, io base 0x00001880
- usb usb6: configuration #1 chosen from 1 choice
- hub 6-0:1.0: USB hub found
- hub 6-0:1.0: 2 ports detected
- ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 177
- PCI: Setting latency timer of device 0000:00:1d.1 to 64
- uhci_hcd 0000:00:1d.1: UHCI Host Controller
- uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
- uhci_hcd 0000:00:1d.1: irq 177, io base 0x000018a0
- usb usb7: configuration #1 chosen from 1 choice
- hub 7-0:1.0: USB hub found
- hub 7-0:1.0: 2 ports detected
- ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 225
- PCI: Setting latency timer of device 0000:00:1d.2 to 64
- uhci_hcd 0000:00:1d.2: UHCI Host Controller
- uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
- uhci_hcd 0000:00:1d.2: irq 225, io base 0x000018c0
- usb usb8: configuration #1 chosen from 1 choice
- hub 8-0:1.0: USB hub found
- hub 8-0:1.0: 2 ports detected
- usb 6-2: new full speed USB device using uhci_hcd and address 2
- SCSI subsystem initialized
- libata version 3.00 loaded.
- ahci 0000:00:1f.2: version 3.0
- ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 177
- usb 6-2: configuration #1 chosen from 1 choice
- input: ServerEngines SE USB Device as /class/input/input0
- input: USB HID v1.11 Keyboard [ServerEngines SE USB Device] on usb-0000:00:1d.0-2
- input: ServerEngines SE USB Device as /class/input/input1
- input: USB HID v1.11 Mouse [ServerEngines SE USB Device] on usb-0000:00:1d.0-2
- ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl RAID mode
- ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part
- PCI: Setting latency timer of device 0000:00:1f.2 to 64
- scsi0 : ahci
- scsi1 : ahci
- scsi2 : ahci
- scsi3 : ahci
- ata1: SATA max UDMA/133 abar m2048@0xec000800 port 0xec000900 irq 233
- ata2: SATA max UDMA/133 abar m2048@0xec000800 port 0xec000980 irq 233
- ata3: DUMMY
- ata4: DUMMY
- ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata1.00: ATA-8: WDC WD7500AADS-00L5B1, 01.01A01, max UDMA/133
- ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
- ata1.00: configured for UDMA/133
- ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata2.00: ATA-8: WDC WD7500AADS-00L5B1, 01.01A01, max UDMA/133
- ata2.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
- ata2.00: configured for UDMA/133
- Vendor: ATA Model: WDC WD7500AADS-0 Rev: 01.0
- Type: Direct-Access ANSI SCSI revision: 05
- SCSI device sda: 1465149168 512-byte hdwr sectors (750156 MB)
- sda: Write Protect is off
- sda: Mode Sense: 00 3a 00 00
- SCSI device sda: drive cache: write through
- SCSI device sda: 1465149168 512-byte hdwr sectors (750156 MB)
- sda: Write Protect is off
- sda: Mode Sense: 00 3a 00 00
- SCSI device sda: drive cache: write through
- sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
- sd 0:0:0:0: Attached scsi disk sda
- Vendor: ATA Model: WDC WD7500AADS-0 Rev: 01.0
- Type: Direct-Access ANSI SCSI revision: 05
- SCSI device sdb: 1465149168 512-byte hdwr sectors (750156 MB)
- sdb: Write Protect is off
- sdb: Mode Sense: 00 3a 00 00
- SCSI device sdb: drive cache: write through
- SCSI device sdb: 1465149168 512-byte hdwr sectors (750156 MB)
- sdb: Write Protect is off
- sdb: Mode Sense: 00 3a 00 00
- SCSI device sdb: drive cache: write through
- sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
- sd 1:0:0:0: Attached scsi disk sdb
- ata_piix 0000:00:1f.5: version 2.12
- ACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 18 (level, low) -> IRQ 225
- ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
- PCI: Setting latency timer of device 0000:00:1f.5 to 64
- scsi4 : ata_piix
- scsi5 : ata_piix
- ata5: SATA max UDMA/133 cmd 0x1c68 ctl 0x1c5c bmdma 0x1c30 irq 225
- ata6: SATA max UDMA/133 cmd 0x1c60 ctl 0x1c58 bmdma 0x1c38 irq 225
- ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- ata5.00: ATAPI: HL-DT-ST DVD-RAM GH40L, LA01, max UDMA/100
- ata5.00: configured for UDMA/100
- ata6: SATA link down (SStatus 0 SControl 300)
- Vendor: HL-DT-ST Model: DVD-RAM GH40L Rev: LA01
- Type: CD-ROM ANSI SCSI revision: 05
- device-mapper: uevent: version 1.0.3
- device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
- device-mapper: dm-raid45: initialized v0.2594l
- EXT3-fs: INFO: recovery required on readonly filesystem.
- EXT3-fs: write access will be enabled during recovery.
- kjournald starting. Commit interval 5 seconds
- EXT3-fs: recovery complete.
- EXT3-fs: mounted filesystem with ordered data mode.
- SELinux: Disabled at runtime.
- SELinux: Unregistering netfilter hooks
- type=1404 audit(1287143501.135:2): selinux=0 auid=4294967295 ses=4294967295
- input: PC Speaker as /class/input/input2
- EDAC MC: Ver: 2.0.1 Sep 29 2010
- EDAC MC0: Giving out device to i3200_edac i3200: DEV 0000:00:00.0
- PCI: Enabling device 0000:00:1f.3 (0001 -> 0003)
- ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 177
- shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- tg3.c:v3.106 (January 12, 2010)
- ACPI: PCI Interrupt 0000:0e:00.0[A] -> GSI 17 (level, low) -> IRQ 177
- PCI: Setting latency timer of device 0000:0e:00.0 to 64
- eth0: Tigon3 [partno(N/A) rev a200 PHY(5722/5756)] (PCI Express) 10/100/1000Base-T Ethernet 00:1e:0b:79:8c:a2
- eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
- eth0: dma_rwctrl[76180000] dma_mask[64-bit]
- sd 0:0:0:0: Attached scsi generic sg0 type 0
- sd 1:0:0:0: Attached scsi generic sg1 type 0
- scsi 4:0:0:0: Attached scsi generic sg2 type 5
- sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
- Uniform CD-ROM driver Revision: 3.20
- sr 4:0:0:0: Attached scsi CD-ROM sr0
- floppy0: no floppy controllers found
- lp: driver loaded but no devices found
- ACPI: Power Button (FF) [PWRF]
- ACPI: Power Button (CM) [PWRB]
- ACPI: Mapper loaded
- dell-wmi: No known WMI GUID found
- md: Autodetecting RAID arrays.
- md: autorun ...
- md: ... autorun DONE.
- device-mapper: multipath: version 1.0.5 loaded
- EXT3 FS on dm-4, internal journal
- kjournald starting. Commit interval 5 seconds
- EXT3 FS on dm-3, internal journal
- EXT3-fs: mounted filesystem with ordered data mode.
- kjournald starting. Commit interval 5 seconds
- EXT3 FS on dm-2, internal journal
- EXT3-fs: mounted filesystem with ordered data mode.
- kjournald starting. Commit interval 5 seconds
- EXT3 FS on dm-1, internal journal
- EXT3-fs: mounted filesystem with ordered data mode.
- Adding 5100596k swap on /dev/mapper/ddf1_producaop6. Priority:-1 extents:1 across:5100596k
- tg3: eth0: Link is up at 100 Mbps, full duplex.
- tg3: eth0: Flow control is on for TX and on for RX.
- NET: Registered protocol family 10
- lo: Disabled Privacy Extensions
- IPv6 over IPv4 tunneling driver
- eth0: no IPv6 routers present
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement