Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- === START OF READ SMART DATA SECTION ===
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x002f 172 172 051 Pre-fail Always - 134962
- 3 Spin_Up_Time 0x0027 253 253 021 Pre-fail Always - 8900
- 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 91
- 5 Reallocated_Sector_Ct 0x0033 176 176 140 Pre-fail Always - 190
- 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
- 9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 2476
- 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
- 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 35
- 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 22
- 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 69
- 194 Temperature_Celsius 0x0022 130 106 000 Old_age Always - 22
- 196 Reallocated_Event_Count 0x0032 010 010 000 Old_age Always - 190
- 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 1
- 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
- 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 45
- SMART Log:
- === START OF INFORMATION SECTION ===
- Device Model: WDC WD2002FAEX-007BA0
- Serial Number: WD-WMAY01247617
- Firmware Version: 05.01D05
- User Capacity: 2,000,398,934,016 bytes
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: 8
- ATA Standard is: Exact ATA specification draft version not indicated
- Local Time is: Mon Aug 15 08:24:34 2011 NZST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x84) Offline data collection activity
- was suspended by an interrupting command from host.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (29280) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 255) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x3037) SCT Status supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x002f 172 172 051 Pre-fail Always - 134962
- 3 Spin_Up_Time 0x0027 253 253 021 Pre-fail Always - 8900
- 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 91
- 5 Reallocated_Sector_Ct 0x0033 176 176 140 Pre-fail Always - 190
- 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
- 9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 2476
- 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
- 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 35
- 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 22
- 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 69
- 194 Temperature_Celsius 0x0022 130 106 000 Old_age Always - 22
- 196 Reallocated_Event_Count 0x0032 010 010 000 Old_age Always - 190
- 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 1
- 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
- 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 45
- General Purpose Logging (GPL) feature set supported
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- GP/S Log at address 0x00 has 1 sectors [Log Directory]
- SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
- SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log]
- GP Log at address 0x03 has 6 sectors [Ext. Comprehensive SMART error log]
- SMART Log at address 0x06 has 1 sectors [SMART self-test log]
- GP Log at address 0x07 has 1 sectors [Extended self-test log]
- SMART Log at address 0x09 has 1 sectors [Selective self-test log]
- GP Log at address 0x10 has 1 sectors [NCQ Command Error]
- GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
- GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
- GP/S Log at address 0xa0 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa1 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa2 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa3 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa4 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa5 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa6 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa7 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa8 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xaa has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xab has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xac has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xad has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xae has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xaf has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb0 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb1 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb2 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb3 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb4 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb5 has 1 sectors [Device vendor specific log]
- GP Log at address 0xb6 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb7 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xbd has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xc0 has 1 sectors [Device vendor specific log]
- GP Log at address 0xc1 has 24 sectors [Device vendor specific log]
- GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status]
- GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer]
- SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
- Device Error Count: 6147 (device log contains only the most recent 24 errors)
- CR = Command Register
- FEATR = Features Register
- COUNT = Count (was: Sector Count) Register
- LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
- LH = LBA High (was: Cylinder High) Register ] LBA
- LM = LBA Mid (was: Cylinder Low) Register ] Register
- LL = LBA Low (was: Sector Number) Register ]
- DV = Device (was: Device/Head) Register
- DC = Device Control Register
- ER = Error register
- ST = Status register
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 6147 [2] occurred at disk power-on lifetime: 2470 hours (102 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 04 00 00 00 9c 75 84 88 e0 00 Error: UNC 1024 sectors at LBA = 0x9c758488 = 2624947336
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 25 00 00 04 00 00 00 9c 75 84 88 e0 08 2d+09:20:31.840 READ DMA EXT
- ef 00 10 00 02 00 00 00 00 00 00 a0 08 2d+09:20:31.840 SET FEATURES [Reserved for Serial ATA]
- ec 00 00 00 00 00 00 00 00 00 00 a0 08 2d+09:20:31.836 IDENTIFY DEVICE
- ef 00 03 00 46 00 00 00 00 00 00 a0 08 2d+09:20:31.836 SET FEATURES [Set transfer mode]
- ef 00 10 00 02 00 00 00 00 00 00 a0 08 2d+09:20:31.836 SET FEATURES [Reserved for Serial ATA]
- Error 6146 [1] occurred at disk power-on lifetime: 2470 hours (102 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 04 00 00 00 9c 75 84 88 e0 00 Error: UNC 1024 sectors at LBA = 0x9c758488 = 2624947336
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 25 00 00 04 00 00 00 9c 75 84 88 e0 08 2d+09:20:30.112 READ DMA EXT
- 25 00 00 04 00 00 00 9c 75 80 88 e0 08 2d+09:20:29.965 READ DMA EXT
- 25 00 00 00 b0 00 00 9c 75 7f d0 e0 08 2d+09:20:29.129 READ DMA EXT
- ef 00 10 00 02 00 00 00 00 00 00 a0 08 2d+09:20:29.129 SET FEATURES [Reserved for Serial ATA]
- ec 00 00 00 00 00 00 00 00 00 00 a0 08 2d+09:20:29.125 IDENTIFY DEVICE
- Error 6145 [0] occurred at disk power-on lifetime: 2470 hours (102 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 b0 00 00 9c 75 7f d0 e0 00 Error: UNC 176 sectors at LBA = 0x9c757fd0 = 2624946128
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 25 00 00 00 b0 00 00 9c 75 7f d0 e0 08 2d+09:20:26.884 READ DMA EXT
- 25 00 00 04 00 00 00 9c 75 7b d0 e0 08 2d+09:20:26.688 READ DMA EXT
- 25 00 00 04 00 00 00 9c 75 77 d0 e0 08 2d+09:20:26.225 READ DMA EXT
- c8 00 00 00 08 00 00 00 00 84 b0 e0 08 2d+09:20:26.182 READ DMA
- 35 00 00 02 90 00 00 9c 75 75 40 e0 08 2d+09:20:26.177 WRITE DMA EXT
- Error 6144 [23] occurred at disk power-on lifetime: 2470 hours (102 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 01 a0 00 00 9c 75 6b 40 e0 00 Error: UNC 416 sectors at LBA = 0x9c756b40 = 2624940864
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 25 00 00 01 a0 00 00 9c 75 6b 40 e0 08 2d+09:20:22.198 READ DMA EXT
- 25 00 00 00 40 00 00 9c 75 6b 00 e0 08 2d+09:20:22.198 READ DMA EXT
- 25 00 00 04 00 00 00 9c 75 67 00 e0 08 2d+09:20:21.710 READ DMA EXT
- 25 00 00 04 00 00 00 9c 75 63 00 e0 08 2d+09:20:21.254 READ DMA EXT
- 25 00 00 00 98 00 00 9c 75 60 a8 e0 08 2d+09:20:20.565 READ DMA EXT
- Error 6143 [22] occurred at disk power-on lifetime: 2470 hours (102 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 01 c0 00 00 9c 75 61 40 e0 00 Error: UNC 448 sectors at LBA = 0x9c756140 = 2624938304
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 25 00 00 01 c0 00 00 9c 75 61 40 e0 08 2d+09:20:18.505 READ DMA EXT
- 25 00 00 00 40 00 00 9c 75 5f 60 e0 08 2d+09:20:18.498 READ DMA EXT
- 25 00 00 00 98 00 00 9c 75 60 08 e0 08 2d+09:20:17.829 READ DMA EXT
- 35 00 00 00 68 00 00 9c 75 5f a0 e0 08 2d+09:20:17.828 WRITE DMA EXT
- 35 00 00 03 80 00 00 9c 75 5b e0 e0 08 2d+09:20:17.827 WRITE DMA EXT
- Error 6142 [21] occurred at disk power-on lifetime: 2470 hours (102 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 04 00 00 00 9c 75 47 e8 e0 00 Error: UNC 1024 sectors at LBA = 0x9c7547e8 = 2624931816
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 25 00 00 04 00 00 00 9c 75 47 e8 e0 08 2d+09:20:10.993 READ DMA EXT
- ef 00 10 00 02 00 00 00 00 00 00 a0 08 2d+09:20:10.993 SET FEATURES [Reserved for Serial ATA]
- ec 00 00 00 00 00 00 00 00 00 00 a0 08 2d+09:20:10.989 IDENTIFY DEVICE
- ef 00 03 00 46 00 00 00 00 00 00 a0 08 2d+09:20:10.989 SET FEATURES [Set transfer mode]
- ef 00 10 00 02 00 00 00 00 00 00 a0 08 2d+09:20:10.989 SET FEATURES [Reserved for Serial ATA]
- Error 6141 [20] occurred at disk power-on lifetime: 2470 hours (102 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 04 00 00 00 9c 75 47 e8 e0 00 Error: UNC 1024 sectors at LBA = 0x9c7547e8 = 2624931816
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 25 00 00 04 00 00 00 9c 75 47 e8 e0 08 2d+09:20:08.637 READ DMA EXT
- 25 00 00 00 08 00 00 9c 75 47 e0 e0 08 2d+09:20:08.619 READ DMA EXT
- 35 00 00 02 98 00 00 9c 75 45 48 e0 08 2d+09:20:08.617 WRITE DMA EXT
- 35 00 00 04 00 00 00 9c 75 41 48 e0 08 2d+09:20:08.615 WRITE DMA EXT
- e5 00 00 00 00 00 00 00 00 00 00 40 08 2d+09:20:08.614 CHECK POWER MODE
- Error 6140 [19] occurred at disk power-on lifetime: 2470 hours (102 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 04 00 00 00 9c 75 41 48 e0 00 Error: UNC 1024 sectors at LBA = 0x9c754148 = 2624930120
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 25 00 00 04 00 00 00 9c 75 41 48 e0 08 2d+09:20:05.982 READ DMA EXT
- b0 00 d1 00 01 00 00 00 c2 4f 01 00 08 2d+09:20:05.977 SMART READ ATTRIBUTE THRESHOLDS [OBS-4]
- 25 00 00 01 60 00 00 9c 75 3f e0 e0 08 2d+09:20:05.976 READ DMA EXT
- b0 00 d0 00 01 00 00 00 c2 4f 00 00 08 2d+09:20:05.972 SMART READ DATA
- 25 00 00 04 00 00 00 9c 75 3b e0 e0 08 2d+09:20:02.709 READ DMA EXT
- SMART Extended Self-test Log Version: 1 (1 sectors)
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 258 (0x0102)
- SCT Support Level: 1
- Device State: Stand-by (1)
- Current Temperature: 22 Celsius
- Power Cycle Min/Max Temperature: 22/42 Celsius
- Lifetime Min/Max Temperature: 22/46 Celsius
- Under/Over Temperature Limit Count: 0/0
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/60 Celsius
- Min/Max Temperature Limit: -41/85 Celsius
- Temperature History Size (Index): 478 (369)
- Index Estimated Time Temperature Celsius
- 370 2011-08-15 00:27 23 ****
- ... ..( 7 skipped). .. ****
- 378 2011-08-15 00:35 23 ****
- 379 2011-08-15 00:36 22 ***
- ... ..( 89 skipped). .. ***
- 469 2011-08-15 02:06 22 ***
- 470 2011-08-15 02:07 37 ******************
- ... ..( 72 skipped). .. ******************
- 65 2011-08-15 03:20 37 ******************
- 66 2011-08-15 03:21 36 *****************
- ... ..(241 skipped). .. *****************
- 308 2011-08-15 07:23 36 *****************
- 309 2011-08-15 07:24 35 ****************
- 310 2011-08-15 07:25 34 ***************
- 311 2011-08-15 07:26 33 **************
- 312 2011-08-15 07:27 33 **************
- 313 2011-08-15 07:28 33 **************
- 314 2011-08-15 07:29 32 *************
- 315 2011-08-15 07:30 32 *************
- 316 2011-08-15 07:31 31 ************
- 317 2011-08-15 07:32 31 ************
- 318 2011-08-15 07:33 30 ***********
- ... ..( 3 skipped). .. ***********
- 322 2011-08-15 07:37 30 ***********
- 323 2011-08-15 07:38 29 **********
- 324 2011-08-15 07:39 29 **********
- 325 2011-08-15 07:40 28 *********
- 326 2011-08-15 07:41 28 *********
- 327 2011-08-15 07:42 28 *********
- 328 2011-08-15 07:43 27 ********
- ... ..( 4 skipped). .. ********
- 333 2011-08-15 07:48 27 ********
- 334 2011-08-15 07:49 26 *******
- ... ..( 8 skipped). .. *******
- 343 2011-08-15 07:58 26 *******
- 344 2011-08-15 07:59 25 ******
- ... ..( 4 skipped). .. ******
- 349 2011-08-15 08:04 25 ******
- 350 2011-08-15 08:05 24 *****
- ... ..( 4 skipped). .. *****
- 355 2011-08-15 08:10 24 *****
- 356 2011-08-15 08:11 23 ****
- ... ..( 12 skipped). .. ****
- 369 2011-08-15 08:24 23 ****
- Warning: device does not support SCT Error Recovery Control command
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x8000 4 226950 Vendor specific
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement