Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Hit [Enter] to boot immediately, or any other key for command prompt.
- Booting [/boot/kernel/kernel]...
- Using DTB provided by U-Boot at address 0x0x100.
- Kernel entry at 0x100100...
- Kernel args: (null)
- KDB: debugger backends: ddb
- KDB: current backend: ddb
- Copyright (c) 1992-2014 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 10.1-PRERELEASE #0 r271243: Mon Sep 8 08:16:16 UTC 2014
- root@releng1.nyi.freebsd.org:/usr/obj/arm.armv6/usr/src/sys/RPI-B arm
- FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
- VT: init without driver.
- CPU: ARM1176JZ-S rev 7 (ARM11J core)
- Supported features: ARM_ISA THUMB2 JAZELLE ARMv4 Security_Ext
- WB enabled LABT branch prediction enabled
- 16KB/32B 4-way instruction cache
- 16KB/32B 4-way write-back-locking-C data cache
- real memory = 536866816 (511 MB)
- avail memory = 483463168 (461 MB)
- random device not loaded; using insecure entropy
- random: <Software, Yarrow> initialized
- kbd0 at kbdmux0
- ofwbus0: <Open Firmware Device Tree>
- simplebus0: <Flattened device tree simple bus> mem 0x20000000-0x20ffffff on ofwbus0
- intc0: <BCM2835 Interrupt Controller> mem 0xb200-0xb3ff on simplebus0
- systimer0: <BCM2835 System Timer> mem 0x3000-0x3fff irq 8,9,10,11 on simplebus0
- Event timer "BCM2835 Event Timer 3" frequency 1000000 Hz quality 1000
- Timecounter "BCM2835 Timecounter" frequency 1000000 Hz quality 1000
- bcmwd0: <BCM2708/2835 Watchdog> mem 0x10001c-0x100027 on simplebus0
- gpio0: <BCM2708/2835 GPIO controller> mem 0x200000-0x2000af irq 57,59,58,60 on simplebus0
- gpio0: read-only pins: 46,47,48,49,50,51,52,53.
- gpio0: reserved pins: 48,49,50,51,52,53.
- gpioc0: <GPIO controller> on gpio0
- gpiobus0: <OFW GPIO bus> on gpio0
- gpioled0: <GPIO led> at pin(s) 16 on gpiobus0
- iichb0: <BCM2708/2835 BSC controller> mem 0x205000-0x20501f irq 61 on simplebus0
- iicbus0: <OFW I2C bus> on iichb0
- iic0: <I2C generic I/O> on iicbus0
- iichb1: <BCM2708/2835 BSC controller> mem 0x804000-0x80401f irq 61 on simplebus0
- iicbus1: <OFW I2C bus> on iichb1
- iic1: <I2C generic I/O> on iicbus1
- spi0: <BCM2708/2835 SPI controller> mem 0x204000-0x20401f irq 62 on simplebus0
- spibus0: <OFW SPI bus> on spi0
- bcm_dma0: <BCM2835 DMA Controller> mem 0x7000-0x7fff,0xe05000-0xe05fff irq 24,25,26,27,28,29,30,31,32,33,34,35,36 on simplebus0
- mbox0: <BCM2835 VideoCore Mailbox> mem 0xb880-0xb8bf irq 1 on simplebus0
- sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x300000-0x3000ff irq 70 on simplebus0
- mmc0: <MMC/SD bus> on sdhci_bcm0
- uart0: <PrimeCell UART (PL011)> mem 0x201000-0x201fff irq 65 on simplebus0
- uart0: console (115200,n,8,1)
- dwcotg0: <DWC OTG 2.0 integrated USB controller> mem 0x980000-0x99ffff irq 17 on simplebus0
- usbus0 on dwcotg0
- fb0: <BCM2835 VT framebuffer driver> on ofwbus0
- simplebus1: <Flattened device tree simple bus> on ofwbus0
- simplebus1: could not get ranges
- device_attach: simplebus1 attach returned 6
- Timecounters tick every 10.000 msec
- usbus0: 480Mbps High Speed USB v2.0
- ugen0.1: <DWCOTG> at usbus0
- uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
- mmcsd0: 4GB <SDHC SA04G 1.0 SN 1A93CC12 MFG 07/2012 by 2 TM> at mmc0 50.0MHz/4bit/65535-block
- fb0: 656x416(0x0@0,0) 16bpp
- fb0: pitch 1312, base 0x5e006000, screen_size 545792
- fbd0 on fb0
- VT: initialize with new VT driver "fb".
- device_attach: fbd0 attach returned 6
- fb0: Failed to attach fbd device
- uhub0: 1 port with 1 removable, self powered
- ugen0.2: <vendor 0x0424> at usbus0
- uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr 2> on usbus0
- uhub1: MTT enabled
- uhub1: 5 ports with 4 removable, self powered
- random: unblocking device.
- ugen0.3: <vendor 0x0424> at usbus0
- smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus0
- smsc0: chip 0xec00, rev. 0002
- miibus0: <MII bus> on smsc0
- ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
- ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
- ue0: <USB Ethernet> on smsc0
- ue0: Ethernet address: b8:27:eb:60:d9:9b
- run_interrupt_driven_hooks: still waiting after 60 seconds for bcm_fb_init
- run_interrupt_driven_hooks: still waiting after 120 seconds for bcm_fb_init
- run_interrupt_driven_hooks: still waiting after 180 seconds for bcm_fb_init
- run_interrupt_driven_hooks: still waiting after 240 seconds for bcm_fb_init
- run_interrupt_driven_hooks: still waiting after 300 seconds for bcm_fb_init
- panic: run_interrupt_driven_config_hooks: waited too long
- KDB: enter: panic
- [ thread pid 0 tid 100000 ]
- Stopped at $d: ldrb r15, [r15, r15, ror r15]!
- db> bt
- Tracing pid 0 tid 100000 td 0xc06625e0
- db_trace_self() at db_trace_self
- pc = 0xc0494b08 lr = 0xc01301d0 (db_stack_trace+0xf4)
- sp = 0xc075eaa8 fp = 0xc075eac0
- r10 = 0xc0661670
- db_stack_trace() at db_stack_trace+0xf4
- pc = 0xc01301d0 lr = 0xc012fb40 (db_command+0x270)
- sp = 0xc075eac8 fp = 0xc075eb68
- r4 = 0x00000000 r5 = 0x00000000
- r6 = 0x00000000
- db_command() at db_command+0x270
- pc = 0xc012fb40 lr = 0xc012f8a4 (db_command_loop+0x60)
- sp = 0xc075eb70 fp = 0xc075eb80
- r4 = 0xc04d4927 r5 = 0xc04eeb92
- r6 = 0xc066165c r7 = 0xc058c2a0
- r8 = 0xc0657bb4 r9 = 0xc0657bb0
- r10 = 0xc075ed50
- db_command_loop() at db_command_loop+0x60
- pc = 0xc012f8a4 lr = 0xc013226c (db_trap+0xd8)
- sp = 0xc075eb88 fp = 0xc075eca8
- r4 = 0x00000000 r5 = 0xc0661668
- r6 = 0xc0657be0
- db_trap() at db_trap+0xd8
- pc = 0xc013226c lr = 0xc0290130 (kdb_trap+0xbc)
- sp = 0xc075ecb0 fp = 0xc075ecd0
- r4 = 0x00000000 r5 = 0x00000001
- r6 = 0xc0657be0 r7 = 0xc058c2a0
- kdb_trap() at kdb_trap+0xbc
- pc = 0xc0290130 lr = 0xc04a8300 (undefinedinstruction+0x298)
- sp = 0xc075ecd8 fp = 0xc075ed48
- r4 = 0x00000000 r5 = 0x00000000
- r6 = 0xc04a7fb8 r7 = 0xe7ffffff
- r8 = 0xc06625e0 r9 = 0xc028fa00
- r10 = 0xc075ed50
- undefinedinstruction() at undefinedinstruction+0x298
- pc = 0xc04a8300 lr = 0xc0496684 (exception_exit)
- sp = 0xc075ed50 fp = 0xc075eda8
- r4 = 0xc04eebec r5 = 0xc075edfc
- r6 = 0xc04f11f2 r7 = 0xc064a100
- r8 = 0xc06625e0 r9 = 0xc06630c0
- r10 = 0xc0649f60
- exception_exit() at exception_exit
- pc = 0xc0496684 lr = 0xc028f9f4 (kdb_enter+0x40)
- sp = 0xc075eda0 fp = 0xc075eda8
- r0 = 0xc0657bc4 r1 = 0x00000000
- r2 = 0xc04f244f r3 = 0x000000ab
- r4 = 0xc04eebec r5 = 0xc075edfc
- r6 = 0xc04f11f2 r7 = 0xc064a100
- r8 = 0xc06625e0 r9 = 0xc06630c0
- r10 = 0xc0649f60 r12 = 0x00000000
- $a() at $a
- pc = 0xc028fa04 lr = 0xc025874c (vpanic+0xb4)
- sp = 0xc075edb0 fp = 0xc075edd0
- r4 = 0x00000100
- vpanic() at vpanic+0xb4
- pc = 0xc025874c lr = 0xc0258688 ($d)
- sp = 0xc075edd8 fp = 0xc075edf0
- r4 = 0xc064a000 r5 = 0xc04f11f2
- r6 = 0xc075edfc r7 = 0xc0649f60
- r8 = 0xc06579a0 r9 = 0xc06579b8
- r10 = 0x00000000
- $d() at $d
- pc = 0xc0258688 lr = 0xc0282954 (boot_run_interrupt_driven_config_hooks+0x10c)
- sp = 0xc075ee08 fp = 0xc075ee88
- r4 = 0x0000003b r5 = 0xc075ee2c
- r6 = 0xc05ac150 r7 = 0xc04f1174
- boot_run_interrupt_driven_config_hooks() at boot_run_interrupt_driven_config_hooks+0x10c
- pc = 0xc0282954 lr = 0xc0207370 (mi_startup+0x11c)
- sp = 0xc075ee90 fp = 0xc075eea8
- r4 = 0x00000001 r5 = 0xc06625d8
- r6 = 0x00000000 r7 = 0xc051e884
- r8 = 0xc0662de4 r9 = 0xc0662de0
- r10 = 0x00003065
- mi_startup() at mi_startup+0x11c
- pc = 0xc0207370 lr = 0xc0100238 (virt_done+0x44)
- sp = 0xc075eeb0 fp = 0x00000000
- r4 = 0xc0100268 r5 = 0xc066c000
- r6 = 0x02048a80 r7 = 0x0010014c
- r8 = 0x00000000 r9 = 0xc074e000
- virt_done() at virt_done+0x44
- pc = 0xc0100238 lr = 0xc0100238 (virt_done+0x44)
- sp = 0xc075eeb0 fp = 0x00000000
- Unable to unwind further
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement