API tools faq
paste
Advertisement
trini

beaglebone boot no login prompt

trini
Jan 28th, 2013
130
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 13.29 KB | None | 0 0
raw download clone embed print report
  1. U-Boot SPL 2013.01-dirty (Jan 23 2013 - 11:30:50)
  2. OMAP SD/MMC: 0
  3. reading u-boot.img
  4. reading u-boot.img
  5.  
  6.  
  7. U-Boot 2013.01-dirty (Jan 23 2013 - 11:30:50)
  8.  
  9. I2C: ready
  10. DRAM: 256 MiB
  11. WARNING: Caches not enabled
  12. NAND: No NAND device found!!!
  13. 0 MiB
  14. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
  15. *** Warning - readenv() failed, using default environment
  16.  
  17. musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
  18. musb-hdrc: MHDRC RTL version 2.0
  19. musb-hdrc: setup fifo_mode 4
  20. musb-hdrc: 28/31 max ep, 16384/16384 memory
  21. USB Peripheral mode controller at 47401000 using PIO, IRQ 0
  22. musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
  23. musb-hdrc: MHDRC RTL version 2.0
  24. musb-hdrc: setup fifo_mode 4
  25. musb-hdrc: 28/31 max ep, 16384/16384 memory
  26. USB Host mode controller at 47401800 using PIO, IRQ 0
  27. Net: cpsw, usb_ether
  28. Hit any key to stop autoboot: 1  0
  29. mmc0 is current device
  30. SD/MMC found on device 0
  31. reading uEnv.txt
  32. 1004 bytes read in 6 ms (163.1 KiB/s)
  33. Loaded environment from uEnv.txt
  34. Importing environment from mmc ...
  35. Running uenvcmd ...
  36. reading uImage-mdp
  37. 3922144 bytes read in 467 ms (8 MiB/s)
  38. reading am335x-bone.dtb
  39. 9851 bytes read in 8 ms (1.2 MiB/s)
  40. ## Booting kernel from Legacy Image at 80200000 ...
  41. Image Name: Linux-3.8.0-rc3-00036-g108da76
  42. Image Type: ARM Linux Kernel Image (uncompressed)
  43. Data Size: 3922080 Bytes = 3.7 MiB
  44. Load Address: 80008000
  45. Entry Point: 80008000
  46. Verifying Checksum ... OK
  47. ## Flattened Device Tree blob at 80f80000
  48. Booting using the fdt blob at 0x80f80000
  49. Loading Kernel Image ... OK
  50. OK
  51. Loading Device Tree to 8fe3e000, end 8fe4367a ... OK
  52.  
  53. Starting kernel ...
  54.  
  55. Uncompressing Linux... done, booting the kernel.
  56. [ 0.000000] Booting Linux on physical CPU 0x0
  57. [ 0.000000] Linux version 3.8.0-rc3-00036-g108da76 (trini@bill-the-cat) (gcc version 4.7.1 (Ubuntu/Linaro 4.7.1-5ubuntu1~ppa1) ) #1 SMP Mon Jan 28 11:24:09 EST 2013
  58. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
  59. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  60. [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
  61. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  62. [ 0.000000] AM335X ES1.0 (neon )
  63. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c0f28000 s12992 r8192 d15680 u36864
  64. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768
  65. [ 0.000000] Kernel command line: console=ttyO0,115200n8 earlyprintk root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait
  66. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  67. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  68. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  69. [ 0.000000] __ex_table already sorted, skipping sort
  70. [ 0.000000] Memory: 255MB = 255MB total
  71. [ 0.000000] Memory: 245336k/245336k available, 16808k reserved, 0K highmem
  72. [ 0.000000] Virtual kernel memory layout:
  73. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  74. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  75. [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
  76. [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
  77. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  78. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  79. [ 0.000000] .text : 0xc0008000 - 0xc06dcb2c (6995 kB)
  80. [ 0.000000] .init : 0xc06dd000 - 0xc072f2c0 ( 329 kB)
  81. [ 0.000000] .data : 0xc0730000 - 0xc07c3038 ( 589 kB)
  82. [ 0.000000] .bss : 0xc07c3038 - 0xc0d1dcf0 (5484 kB)
  83. [ 0.000000] Hierarchical RCU implementation.
  84. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
  85. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  86. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
  87. [ 0.000000] Total of 128 interrupts on 1 active controller
  88. [ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
  89. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  90. [ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
  91. [ 0.000000] Console: colour dummy device 80x30
  92. [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
  93. [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
  94. [ 0.000000] ... MAX_LOCK_DEPTH: 48
  95. [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
  96. [ 0.000000] ... CLASSHASH_SIZE: 4096
  97. [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
  98. [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
  99. [ 0.000000] ... CHAINHASH_SIZE: 16384
  100. [ 0.000000] memory used by lock dependency info: 3695 kB
  101. [ 0.000000] per task-struct memory footprint: 1152 bytes
  102. [ 0.001229] Calibrating delay loop... 364.48 BogoMIPS (lpj=1425408)
  103. [ 0.109073] pid_max: default: 32768 minimum: 301
  104. [ 0.109673] Security Framework initialized
  105. [ 0.109873] Mount-cache hash table entries: 512
  106. [ 0.122827] CPU: Testing write buffer coherency: ok
  107. [ 0.124604] CPU0: thread -1, cpu 0, socket -1, mpidr 0
  108. [ 0.124790] Setting up static identity map for 0x804dd488 - 0x804dd4f8
  109. [ 0.127805] Brought up 1 CPUs
  110. [ 0.127834] SMP: Total of 1 processors activated (364.48 BogoMIPS).
  111. [ 0.131457] devtmpfs: initialized
  112. [ 0.208139] pinctrl core: initialized pinctrl subsystem
  113. [ 0.215369] regulator-dummy: no parameters
  114. [ 0.217683] NET: Registered protocol family 16
  115. [ 0.218710] DMA: preallocated 256 KiB pool for atomic coherent allocations
  116. [ 0.220198] omap-gpmc omap-gpmc: GPMC revision 6.0
  117. [ 0.244651] platform 49000000.edma: alias fck already exists
  118. [ 0.244698] platform 49000000.edma: alias fck already exists
  119. [ 0.244727] platform 49000000.edma: alias fck already exists
  120. [ 0.250288] OMAP GPIO hardware version 0.1
  121. [ 0.279309] No ATAGs?
  122. [ 0.279340] hw-breakpoint: debug architecture 0x4 unsupported.
  123. [ 0.360167] bio: create slab <bio-0> at 0
  124. [ 0.415254] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
  125. [ 0.514616] omap-dma-engine omap-dma-engine: OMAP DMA engine driver
  126. [ 0.526373] SCSI subsystem initialized
  127. [ 0.529243] usbcore: registered new interface driver usbfs
  128. [ 0.529881] usbcore: registered new interface driver hub
  129. [ 0.530858] usbcore: registered new device driver usb
  130. [ 0.534061] omap_i2c 44e0b000.i2c: did not get pins for i2c error: -19
  131. [ 0.536456] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
  132. [ 0.543629] DCDC1: at 1800 mV
  133. [ 0.546402] vdd_mpu: 925 <--> 1325 mV at 1100 mV
  134. [ 0.549409] vdd_core: 925 <--> 1150 mV at 1100 mV
  135. [ 0.551914] LDO1: at 1800 mV
  136. [ 0.554299] LDO2: at 3300 mV
  137. [ 0.557477] LDO3: 1800 <--> 3300 mV at 3300 mV
  138. [ 0.559955] LDO4: at 3300 mV
  139. [ 0.562068] tps65217 0-0024: TPS65217 ID 0x7 version 1.0
  140. [ 0.571854] Switching to clocksource gp_timer
  141. [ 0.735392] NET: Registered protocol family 2
  142. [ 0.738343] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
  143. [ 0.738631] TCP bind hash table entries: 2048 (order: 4, 73728 bytes)
  144. [ 0.739890] TCP: Hash tables configured (established 2048 bind 2048)
  145. [ 0.740171] TCP: reno registered
  146. [ 0.740216] UDP hash table entries: 256 (order: 2, 20480 bytes)
  147. [ 0.740560] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
  148. [ 0.741699] NET: Registered protocol family 1
  149. [ 0.743314] RPC: Registered named UNIX socket transport module.
  150. [ 0.743346] RPC: Registered udp transport module.
  151. [ 0.743363] RPC: Registered tcp transport module.
  152. [ 0.743379] RPC: Registered tcp NFSv4.1 backchannel transport module.
  153. [ 0.745078] NetWinder Floating Point Emulator V0.97 (double precision)
  154. [ 0.745882] CPU PMU: probing PMU on CPU 0
  155. [ 0.745924] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  156. [ 0.956155] VFS: Disk quotas dquot_6.5.2
  157. [ 0.956517] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  158. [ 0.959850] NFS: Registering the id_resolver key type
  159. [ 0.960407] Key type id_resolver registered
  160. [ 0.960436] Key type id_legacy registered
  161. [ 0.960635] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  162. [ 0.961363] msgmni has been set to 479
  163. [ 0.965716] io scheduler noop registered
  164. [ 0.965748] io scheduler deadline registered
  165. [ 0.965843] io scheduler cfq registered (default)
  166. [ 0.970356] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
  167. [ 0.976617] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  168. [ 0.985492] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
  169. [ 0.986143] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
  170. [ 1.643119] console [ttyO0] enabled
  171. [ 1.649313] omap_uart 481a8000.serial: did not get pins for uart4 error: -19
  172. [ 1.657293] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61) is a OMAP UART4
  173. [ 1.708102] brd: module loaded
  174. [ 1.738017] loop: module loaded
  175. [ 1.741855] gpevt gpevt.4: pins are not configured from the driver
  176. [ 1.749477] edma-dma-engine edma-dma-engine.0: allocated channel for 0:12
  177. [ 1.757011] gpevt gpevt.4: Amazing GPIO DMA Event Test Driver(tm) engaged
  178. [ 1.772037] mtdoops: mtd device (mtddev=name/number) must be supplied
  179. [ 1.780563] OneNAND driver initializing
  180. [ 1.786068] omap2_mcspi 481a0000.spi: pins are not configured from the driver
  181. [ 1.796987] edma-dma-engine edma-dma-engine.0: allocated channel for 0:43
  182. [ 1.804460] edma-dma-engine edma-dma-engine.0: allocated channel for 0:42
  183. [ 1.813385] st7735 spi1.0: pins are not configured from the driver
  184. [ 2.716620] Console: switching to colour frame buffer device 16x20
  185. [ 2.723968] fb0: ST7735 frame buffer device,
  186. [ 2.723968] using 40960 KiB of video memory
  187. [ 2.740974] usbcore: registered new interface driver asix
  188. [ 2.747448] usbcore: registered new interface driver cdc_ether
  189. [ 2.754310] usbcore: registered new interface driver smsc95xx
  190. [ 2.764072] usbcore: registered new interface driver net1080
  191. [ 2.770876] usbcore: registered new interface driver cdc_subset
  192. [ 2.777809] usbcore: registered new interface driver zaurus
  193. [ 2.784466] usbcore: registered new interface driver cdc_ncm
  194. [ 2.793381] usbcore: registered new interface driver cdc_wdm
  195. [ 2.799912] Initializing USB Mass Storage driver...
  196. [ 2.806005] usbcore: registered new interface driver usb-storage
  197. [ 2.812440] USB Mass Storage support registered.
  198. [ 2.818064] usbcore: registered new interface driver usbtest
  199. [ 2.827124] mousedev: PS/2 mouse device common for all mice
  200. [ 2.839451] i2c /dev entries driver
  201. [ 2.846346] Driver for 1-wire Dallas network protocol.
  202. [ 2.857923] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
  203. [ 2.870152] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
  204. [ 2.877400] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
  205. [ 2.888275] omap_hsmmc mmc.3: pins are not configured from the driver
  206. [ 2.947598] usbcore: registered new interface driver usbhid
  207. [ 2.953562] usbhid: USB HID core driver
  208. [ 2.961387] oprofile: using arm/armv7
  209. [ 2.966548] TCP: cubic registered
  210. [ 2.970064] Initializing XFRM netlink socket
  211. [ 2.974832] NET: Registered protocol family 17
  212. [ 2.979716] NET: Registered protocol family 15
  213. [ 2.984901] Key type dns_resolver registered
  214. [ 2.989649] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  215. [ 2.997898] ThumbEE CPU extension supported.
  216. [ 3.039438] mmc0: host does not support reading read-only switch. assuming write-enable.
  217. [ 3.050959] mmc0: new high speed SD card at address 1234
  218. [ 3.059901] mmcblk0: mmc0:1234 SA02G 1.83 GiB
  219. [ 3.072523] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
  220. [ 3.079069] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
  221. [ 3.087060] mmcblk0: p1 p2 p3
  222. [ 3.097270] libphy: 4a101000.mdio: probed
  223. [ 3.101510] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
  224. [ 3.111785] Random MACID = 86:7d:97:ef:db:98
  225. [ 3.125420] /home/trini/work/kernel/linux/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  226. [ 3.183112] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  227. [ 3.191959] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  228. [ 3.209261] devtmpfs: mounted
  229. [ 3.213323] Freeing init memory: 328K
  230. [ 3.878591] init: Failed to create pty - disabling logging for job
  231. [ 3.886167] init: Temporary process spawn error: No space left on device
  232. [ 4.028678] init: Failed to create pty - disabling logging for job
  233. [ 4.038132] init: Temporary process spawn error: No space left on device
  234. [ 4.080894] init: Failed to create pty - disabling logging for job
  235. [ 4.088387] init: Temporary process spawn error: No space left on device
  236. [ 4.413630] init: Failed to create pty - disabling logging for job
  237. [ 4.420996] init: Temporary process spawn error: No space left on device
  238. [ 4.482743] init: Failed to create pty - disabling logging for job
  239. [ 4.490168] init: Temporary process spawn error: No space left on device
  240. [ 4.692483] init: Failed to create pty - disabling logging for job
  241. [ 4.700557] init: Temporary process spawn error: No space left on device
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!