BUFFALO CFE Version 1.00  [DDRCLK:400]
Memory Test start(0x07E00000) end(0x08000000) size(2097152)
Data line test start:0x07e00000 pattern 0x00000001 0x00000003 0x00000007 0x0000000F 0x00000005 0x00000015 0x00000055 0xAAAAAAAA
Address line test start:0x07e00000 len:0x200000 pattern 0xAAAAAAAA 0x55555555
Fill test patnum:2
fill Pattern 5555AAAA  Writing...             Reading...
fill Pattern AAAA5555  Writing...             Reading...
decompressing
Decompressing...done
Found a ST compatible (Marconix) serial flash with 16 64KB blocks; total size 1MB
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.30.163.18 (r377098)

DDR clock change and Calibrate... [400->533]


BUFFALO CFE Version 1.00  [DDRCLK:533]
Memory Test start(0x07E00000) end(0x08000000) size(2097152)
Data line test start:0x07e00000 pattern 0x00000001 0x00000003 0x00000007 0x0000000F 0x00000005 0x00000015 0x00000055 0xAAAAAAAA
Address line test start:0x07e00000 len:0x200000 pattern 0xAAAAAAAA 0x55555555
Fill test patnum:2
fill Pattern 5555AAAA  Writing...             Reading...
fill Pattern AAAA5555  Writing...             Reading...
decompressing
Decompressing...done
Found a ST compatible (Marconix) serial flash with 16 64KB blocks; total size 1MB


CFE version 6.30.163.18 (r377098) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
Build Date: Fri Jan 18 16:22:36 JST 2013 (root@fc17.localdomain)
Copyright (C) 2000-2008 Broadcom Corporation.

Memory Test start(0x00000000) end(0x07E00000) size(132120576)
Data line test start:0x00000000 pattern 0x00000001 0x00000003 0x00000007 0x0000000F 0x00000005 0x00000015 0x00000055 0xAAAAAAAA
Address line test start:0x00000000 len:0x7e00000 pattern 0xAAAAAAAA 0x55555555
Fill test patnum:2
fill Pattern 5555AAAA  Writing...             Reading...
fill Pattern AAAA5555  Writing...             Reading...
Memory Test start(0x88000000) end(0xA0000000) size(402653184)
Data line test start:0x88000000 pattern 0x00000001 0x00000003 0x00000007 0x0000000F 0x00000005 0x00000015 0x00000055 0xAAAAAAAA
Address line test start:0x88000000 len:0x18000000 pattern 0xAAAAAAAA 0x55555555
Fill test patnum:2
fill Pattern 5555AAAA  Writing...             Reading...
fill Pattern AAAA5555  Writing...             Reading...
Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
Found a Esmt NAND flash:
Total size:  128MB
Block size:  128KB
Page Size:   2048B
OOB Size:    64B
Sector size: 512B
Spare size:  16B
ECC level:   8-bit
Device ID: 0x92 0xf1 0x80 0x95 0x40
DDR Clock: 533 MHz
Warning: using legacy sdram_ncdl parameter to set DDR frequency. Equivalent setting in clkfreq=800,*0* will be ignored.
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.30.163.18 (r377098)
CPU type 0x0: 800MHz
Tot mem: 524288 KBytes

CFE mem:    0x07E00000 - 0x07F9A984 (1681796)
Data:       0x07E53480 - 0x07E53948 (1224)
BSS:        0x07E53958 - 0x07E98984 (282668)
Heap:       0x07E98984 - 0x07F98984 (1048576)
Stack:      0x07F98984 - 0x07F9A984 (8192)
Text:       0x07E00000 - 0x07E488F0 (297200)
Boot:       0x07F9B000 - 0x07FDB000
Reloc:      I:00000000 - D:00000000

Device eth0:  hwaddr B2-C7-45-7C-D0-9A, ipaddr 192.168.11.1, mask 255.255.255.0
        gateway not set, nameserver not set
check_trx: start nflash1.trx
check_trx: exit nflash1.trx
Loader:raw Filesys:raw Dev:nflash0.os File: Options:(null)
Loading: .. 1442000 bytes read
Entry at 0x00008000
Closing network.
Starting program at 0x00008000
Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x0
Linux version 3.10.63 (root@dd-wrt.buildserver) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r42925) ) #3249 SMP Sat Dec 20 05:26:27 CET 2014
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Northstar Prototype
Ignoring unrecognised tag 0x00000000
Memory policy: ECC disabled, Data cache writeaBad eraseblock 1023 at 0x000007fe0000
Options: NO_SUBPAGE_WRITE,
Creating 1 MTD partitions on "brcmnand":
0x000000000000-0x000008000000 : "ddwrt"
end_request: I/O error, dev mtdblock2, sector 0
SQUASHFS error: sb_bread failed reading block 0x0
VFS: Cannot open root device "1f02" or unknown-block(31,2): error -19
Please append a correct "root=" boot option; here are the available partitions:
1f00            1024 mtdblock0  (driver?)
1f01             960 mtdblock1  (driver?)
1f03              64 mtdblock3  (driver?)
1f04              64 mtdblock4  (driver?)
1f05          131072 mtdblock5  (driver?)
1f06          131072 mtdblock6  (driver?)
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,2)
CPU0: stopping
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.63 #3249
Backtrace:
[<c0015c3c>] (dump_backtrace+0x0/0x118) from [<c0015e44>] (show_stack+0x18/0x1c)
 r6:00000000 r5:00000000 r4:c03d7b60 r3:00000000
[<c0015e2c>] (show_stack+0x0/0x1c) from [<c012eb14>] (dump_stack+0x24/0x28)
[<c012eaf0>] (dump_stack+0x0/0x28) from [<c0017730>] (handle_IPI+0xe0/0x134)
[<c0017650>] (handle_IPI+0x0/0x134) from [<c00086d8>] (gic_handle_irq+0x60/0x64)
 r6:c03dbf38 r5:c03ee640 r4:f010010c r3:c0013804
[<c0008678>] (gic_handle_irq+0x0/0x64) from [<c0008860>] (__irq_svc+0x40/0x50)
Exception stack(0xc03dbf38 to 0xc03dbf80)
bf20:                                                       c187c778 00000000
bf40: 0000057c 00000000 c03da000 c03da000 c03ee470 c034bdf4 c03da000 c03f5b67
bf60: c03f5b67 c03dbf8c c03dbf90 c03dbf80 c0013804 c0013808 60000013 ffffffff
 r7:c03dbf6c r6:ffffffff r5:60000013 r4:c0013808
[<c00137d8>] (arch_cpu_idle+0x0/0x34) from [<c005ea2c>] (cpu_startup_entry+0xd8/0x118)
[<c005e954>] (cpu_startup_entry+0x0/0x118) from [<c000d5cc>] (rest_init+0x7c/0x80)
 r7:ffffffff r3:00000000
[<c000d550>] (rest_init+0x0/0x80) from [<c039eaac>] (start_kernel+0x280/0x28c)
[<c039e82c>] (start_kernel+0x0/0x28c) from [<00008074>] (0x8074)
 r8:0000406a r7:c03f48d0 r6:c03c18c4 r5:c03ee3f4 r4:10c53c7d
Rebooting in 10 seconds..