CPU revision is: 00029008
Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 8kB, 2-way, linesize 16 bytes.
Linux version 2.4.35.4 (agb@arrakis) (gcc version 3.4.6 (OpenWrt-2.0)) #12 Tue Dec 29 15:30:20 UTC 2009
Setting the PFC to its default value
Determined physical RAM map:
 memory: 01000000 @ 00000000 (usable)
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200
CPU: BCM5352 rev 0 at 200 MHz
Using 100.000 MHz high precision timer.
Calibrating delay loop... 199.47 BogoMIPS
Memory: 14244k/16384k available (1437k kernel code, 2140k reserved, 100k data, 84k init, 0k highmem)
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Checking for 'wait' instruction...  unavailable.
POSIX conformance testing by UNIFIX
PCI: no core
PCI: Fixing up bus 0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Registering mini_fo version $Id$
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 3) is a 16550A
b44.c:v0.93 (Mar, 2004)
PCI: Setting latency timer of device 00:01.0 to 64
eth0: Broadcom 47xx 10/100BaseT Ethernet 00:25:9c:cf:f7:76
Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0
 Amd/Fujitsu Extended Query Table v1.1 at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Flash device: 0x400000 at 0x1c000000
bootloader size: 262144
Physically mapped flash: Filesystem type: squashfs, size=0x1820c3
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "cfe"
0x00040000-0x003f0000 : "linux"
0x000bc000-0x00240000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
0x003f0000-0x00400000 : "nvram"
0x00240000-0x003f0000 : "rootfs_data"
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 84k freed
Algorithmics/MIPS FPU Emulator v1.5
diag: Detected 'Linksys WRT54G/GS/GL'
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
roboswitch: Probing device eth0: found!
mini_fo: using base directory: /
mini_fo: using storage directory: /jffs
jffs2.bbc: SIZE compression mode activated.
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
eth0.0: add 01:00:5e:00:00:01 mcast address to master interface
eth0.0: dev_set_promiscuity(master, 1)
device eth0 entered promiscuous mode
device eth0.0 entered promiscuous mode
br-lan: port 1(eth0.0) entering learning state
br-lan: port 1(eth0.0) entering forwarding state
br-lan: topology change detected, propagating
eth0.1: add 01:00:5e:00:00:01 mcast address to master interface
PCI: Setting latency timer of device 00:05.0 to 64
PCI/DMA
wl0: wlc_attach: chiprev 0 coreunit 0 corerev 9 cccap 0x4787aa maccap 0x0 band 2.4G, phy_type 2 phy_rev 7 ana_rev 2
wl0: Broadcom BCM4320 802.11 Wireless Controller 4.150.10.5
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (5953 buckets, 5953 max) - 352 bytes per conntrack
device wl0 entered promiscuous mode
br-lan: port 2(wl0) entering learning state
br-lan: port 2(wl0) entering forwarding state
br-lan: topology change detected, propagating
eth0.1: dev_set_promiscuity(master, 1)
device eth0.1 entered promiscuous mode
eth0.1: dev_set_promiscuity(master, -1)
device eth0.1 left promiscuous mode
eth0.1: dev_set_promiscuity(master, 1)
device eth0.1 entered promiscuous mode
eth0.1: dev_set_promiscuity(master, -1)
device eth0.1 left promiscuous mode
eth0.1: dev_set_promiscuity(master, 1)
device eth0.1 entered promiscuous mode
eth0.1: dev_set_promiscuity(master, -1)
device eth0.1 left promiscuous mode
eth0.1: dev_set_promiscuity(master, 1)
device eth0.1 entered promiscuous mode
eth0.1: dev_set_promiscuity(master, -1)
device eth0.1 left promiscuous mode
eth0.1: dev_set_promiscuity(master, 1)
device eth0.1 entered promiscuous mode
eth0.1: dev_set_promiscuity(master, -1)
device eth0.1 left promiscuous mode
br-lan: port 2(wl0) entering disabled state
br-lan: port 2(wl0) entering disabled state
device wl0 left promiscuous mode
device wl0 entered promiscuous mode
br-lan: port 2(wl0) entering learning state
br-lan: port 2(wl0) entering forwarding state
br-lan: topology change detected, propagating
eth0.1: dev_set_promiscuity(master, 1)
device eth0.1 entered promiscuous mode
eth0.1: dev_set_promiscuity(master, -1)
device eth0.1 left promiscuous mode
ip_conntrack_rtsp v0.01 loading
ip_nat_rtsp v0.01 loading
root@wrt:~# cat /proc/cpuinfo
system type             : Broadcom BCM5352 chip rev 0
processor               : 0
cpu model               : BCM3302 V0.8
BogoMIPS                : 199.47
wait instruction        : no
microsecond timers      : yes
tlb_entries             : 32
extra interrupt vector  : no
hardware watchpoint     : no
VCED exceptions         : not available
VCEI exceptions         : not available
root@wrt:~# df -h
Filesystem                Size      Used Available Use% Mounted on
rootfs                    1.6M      1.6M         0 100% /
/dev/root                 1.6M      1.6M         0 100% /rom
tmpfs                     7.0M    720.0k      6.3M  10% /tmp
/dev/mtdblock/4           1.7M      1.5M    232.0k  87% /jffs
mini_fo:/jffs             1.6M      1.6M         0 100% /
root@wrt:~# free
              total         used         free       shared      buffers
  Mem:        14328        11200         3128            0          208
 Swap:            0            0            0
Total:        14328        11200         3128
root@wrt:~# uptime -a
 14:02:48 up 5 days, 22:34, load average: 0.01, 0.01, 0.00
root@wrt:~# uname -a
Linux wrt 2.4.35.4 #12 Tue Dec 29 15:30:20 UTC 2009 mips unknown
root@wrt:~#