[    0.000000@0] Initializing cgroup subsys cpuset
[    0.000000@0] Initializing cgroup subsys cpu
[    0.000000@0] Initializing cgroup subsys cpuacct
[    0.000000@0] Linux version 3.14.29 (stefan@spin) (gcc version 6.2.0 (GCC) ) #1 SMP PREEMPT Wed Mar 1 21:47:24 CET 2017
[    0.000000@0] CPU: AArch64 Processor [410fd034] revision 4
[    0.000000@0] fdt Reserved memory table:
[    0.000000@0]            linux,meson-fb: 0x000000007e700000 - 0x0000000080000000  (25 MiB)
[    0.000000@0]                  linux,di: 0x000000007c900000 - 0x000000007e700000  (30 MiB)
[    0.000000@0] DI: DI reserved memory: created CMA memory pool at 0x000000007c900000, size 30 MiB
[    0.000000@0]             linux,ion-dev: 0x000000007a900000 - 0x000000007c900000  (32 MiB)
[    0.000000@0]               linux,ppmgr: 0x000000007a900000 - 0x000000007a900000  (0 MiB)
[    0.000000@0]        linux,codec_mm_cma: 0x000000006e800000 - 0x000000007a800000  (192 MiB)
[    0.000000@0]   linux,codec_mm_reserved: 0x000000006a700000 - 0x000000006e800000  (65 MiB)
[    0.000000@0] fdt Reserved memory total:  347 MiB
[    0.000000@0] cma: Reserved 8 MiB at 69c00000
[    0.000000@0] On node 0 totalpages: 513024
[    0.000000@0]   Normal zone: 9032 pages used for memmap
[    0.000000@0]   Normal zone: 0 pages reserved
[    0.000000@0]   Normal zone: 513024 pages, LIFO batch:31
[    0.000000@0] psci: probing function IDs from device-tree
[    0.000000@0] PERCPU: Embedded 12 pages/cpu @ffffffc07a8a3000 s18368 r8192 d22592 u49152
[    0.000000@0] pcpu-alloc: s18368 r8192 d22592 u49152 alloc=12*4096
[    0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000@0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 503992
[    0.000000@0] Kernel command line: console=tty0 boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 no_console_suspend logo=osd1,loaded,0x3f800000,1080p60hz vout=hdmi,enable hdmimode=480cvbs cvbsmode=480cvbs mac=00:1e:06:34:00:77 consoleblank=0 max_freq=1536 maxcpus=4 hdmitx=cec17 nosplash ssh cvbsmode=480cvbs
[    0.000000@0] logo: osd1
[    0.000000@0] logo: loaded
[    0.000000@0] logo: 0x3f800000
[    0.000000@0] logo: 1080p60hz
[    0.000000@0] vout_serve: hdmi
[    0.000000@0] vout_serve: enable: 1
[    0.000000@0] logo: get hdmimode: 480cvbs
[    0.000000@0] logo: get cvbsmode: 480cvbs
[    0.000000@0] dvfs [get_max_freq] - max_freq : 1536000000
[    0.000000@0] hdmitx: cec: HDMI hdmi_cec_func_config:0x17
[    0.000000@0] logo: get cvbsmode: 480cvbs
[    0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000@0] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000@0] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000@0] Memory: 1652808K/2052096K available (8672K kernel code, 813K rwdata, 3308K rodata, 3653K init, 5528K bss, 399288K reserved)
[    0.000000@0] Virtual kernel memory layout:
[    0.000000@0]     vmalloc : 0xffffff8000000000 - 0xffffff8040000000   (  1024 MB)
[    0.000000@0]     vmemmap : 0xffffff8040010000 - 0xffffff804239f800   (    35 MB)
[    0.000000@0]     modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
[    0.000000@0]     memory  : 0xffffffc000000000 - 0xffffffc07e700000   (  2023 MB)
[    0.000000@0]       .init : 0xffffffc001c35000 - 0xffffffc001fc67c0   (  3654 kB)
[    0.000000@0]       .text : 0xffffffc001080000 - 0xffffffc001c34184   ( 11985 kB)
[    0.000000@0]       .data : 0xffffffc001fc7000 - 0xffffffc002092678   (   814 kB)
[    0.000000@0] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=4, Nodes=1
[    0.000000@0] arch_multi_cluster:0
[    0.000000@0] Preemptible hierarchical RCU implementation.
[    0.000000@0]    RCU debugfs-based tracing is enabled.
[    0.000000@0] NR_IRQS:64 nr_irqs:64 0
[    0.000000@0] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
[    0.000022@0] meson_bc_timer: mclk->mux_reg =ffffff800000c990,mclk->reg =ffffff800000e994
[    0.000214@0] Console: colour dummy device 80x25
[    0.000660@0] console [tty0] enabled
[    0.003008@0] allocated 8388608 bytes of page_cgroup
[    0.003018@0] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.003037@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.003058@0] pid_max: default: 32768 minimum: 301
[    0.003158@0] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.003172@0] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.005016@0] device-tree: Duplicate name in /efusekey, renamed to "key0#1"
[    0.005038@0] device-tree: Duplicate name in /efusekey, renamed to "key1#1"
[    0.005052@0] device-tree: Duplicate name in /efusekey, renamed to "key2#1"
[    0.005066@0] device-tree: Duplicate name in /efusekey, renamed to "key3#1"
[    0.007293@0] Initializing cgroup subsys debug
[    0.007310@0] Initializing cgroup subsys memory
[    0.007330@0] Initializing cgroup subsys devices
[    0.007341@0] Initializing cgroup subsys freezer
[    0.007352@0] Initializing cgroup subsys blkio
[    0.007362@0] Initializing cgroup subsys net_prio
[    0.007412@0] ftrace: allocating 29443 entries in 116 pages
[    0.033176@0] /cpus/cpu@0: Missing clock-frequency property
[    0.033206@0] /cpus/cpu@1: Missing clock-frequency property
[    0.033219@0] /cpus/cpu@2: Missing clock-frequency property
[    0.033232@0] /cpus/cpu@3: Missing clock-frequency property
[    0.074362@0] Meson chip version = RevC (1F:C - 0:0)
[    0.093543@1] CPU1: Booted secondary processor
[    0.113524@2] CPU2: Booted secondary processor
[    0.133529@3] CPU3: Booted secondary processor
[    0.133583@0] Brought up 4 CPUs
[    0.133616@0] SMP: Total of 4 processors activated.
[    0.134004@0] devtmpfs: initialized
[    0.146226@0] xor: measuring software checksum speed
[    0.242912@0]    8regs     :  2933.600 MB/sec
[    0.342918@0]    8regs_prefetch:  2612.800 MB/sec
[    0.442942@0]    32regs    :  3468.000 MB/sec
[    0.542969@0]    32regs_prefetch:  2941.600 MB/sec
[    0.542978@0] xor: using function: 32regs (3468.000 MB/sec)
[    0.542994@0] pinctrl core: initialized pinctrl subsystem
[    0.543211@0] regulator-dummy: no parameters
[    0.543552@0] NET: Registered protocol family 16
[    0.544461@0] aml_vdac_init: module init
[    0.544506@0] register canvas platform driver
[    0.544532@0] register rdma platform driver
[    0.545141@0] vdso: 2 pages (1 code, 1 data) at base ffffffc001fce000
[    0.545388@0] DMA: preallocated 256 KiB pool for atomic allocations
[    0.546589@0] software IO TLB [mem 0x65800000-0x65c00000] (4MB) mapped at [ffffffc065800000-ffffffc065bfffff]
[    0.546667@0] aml_i2c version: 20140813
[    0.546707@0] codec_mm:codec_mm_module_init
[    0.546878@0] gxbb_mpll_clk: register mpll_clk_out0 success done
[    0.546892@0] gxbb_mpll_clk: register mpll_clk_out1 success done
[    0.546904@0] gxbb_mpll_clk: register mpll_clk_out2 success done
[    0.547096@0] clk_sys: register PLL sys_pll success done
[    0.547139@0] gxbb_clk: [ xtal   ] ->clockrate: 24000000Hz
[    0.547149@0] gxbb_clk: [ 32Khz  ] ->clockrate: 32000Hz
[    0.547159@0] gxbb_clk: [ clk81  ] ->clockrate: 166666666Hz
[    0.547169@0] gxbb_clk: [ fixed_pll  ] ->clockrate: 2000000000Hz
[    0.547179@0] gxbb_clk: [ fclk_div2  ] ->clockrate: 1000000000Hz
[    0.547189@0] gxbb_clk: [ fclk_div3  ] ->clockrate: 666666666Hz
[    0.547199@0] gxbb_clk: [ fclk_div4  ] ->clockrate: 500000000Hz
[    0.547209@0] gxbb_clk: [ fclk_div5  ] ->clockrate: 400000000Hz
[    0.547218@0] gxbb_clk: [ fclk_div7  ] ->clockrate: 285714285Hz
[    0.547248@0] gxbb_clk: clock initialization complete
[    0.547393@0] clkmsr: msr_clk_reg0=ffffff800005c75c,msr_clk_reg2=ffffff800005e764
[    0.548547@0] aml_iomap: amlogic iomap probe done
[    0.548773@0] pinmux-gxbb c1109880.pinmux: Init pinux probe!
[    0.549520@0] pinmux-gxbb c1109880.pinmux: Probed amlogic pinctrl driver
[    0.550092@0] aml-i2c c1108500.i2c: add adapter aml_i2c_adap1(ffffffc065c3c0e0)
[    0.550428@0] dvfs [scpi_dvfs_get_opps] - new count 6, max_freq 1536000000
[    0.551394@0] codec_mm has 2 memory regions
[    0.551415@0] codec_mm codec_mm.17: assigned reserved memory node linux,codec_mm_cma ok
[    0.551433@0] codec_mm codec_mm.17: assigned reserved memory node linux,codec_mm_reserved ok
[    0.551469@0] codec_mm has 2 memory regions
[    0.551482@0] codec_mm codec_mm.17: assigned reserved memory node linux,codec_mm_cma ok
[    0.551499@0] codec_mm codec_mm.17: assigned reserved memory node linux,codec_mm_reserved ok
[    0.552158@0] vpu: driver version: v02
[    0.552175@0] vpu: load vpu_clk: 666667000Hz(7)
[    0.552206@0] vpu: vpu_probe OK
[    0.552505@0] tv_vout: tvout_probe
[    0.552518@0] tv_vout: major number 254 for disp
[    0.552527@0] vout_notify: vout_register_server
[    0.552536@0] tv_vout: register tv module server ok
[    0.552560@0] tv_vout: tvout_probe OK
[    0.552729@0] canvas_probe reg=00000000c8838000,size=400
[    0.552744@0] canvas maped reg_base =ffffff800019c000
[    0.555964@0] rdma_probe
[    0.666237@0] bio: create slab <bio-0> at 0
[    0.833186@0] raid6: int64x1    535 MB/s
[    1.003257@0] raid6: int64x2    848 MB/s
[    1.173259@0] raid6: int64x4   1268 MB/s
[    1.343307@0] raid6: int64x8   1413 MB/s
[    1.513401@0] raid6: neonx1     935 MB/s
[    1.683428@0] raid6: neonx2    1501 MB/s
[    1.853487@0] raid6: neonx4    1937 MB/s
[    2.023543@0] raid6: neonx8    2033 MB/s
[    2.023551@0] raid6: using algorithm neonx8 (2033 MB/s)
[    2.023560@0] raid6: using intx1 recovery algorithm
[    2.023804@0] SCSI subsystem initialized
[    2.023952@0] usbcore: registered new interface driver usbfs
[    2.023988@0] usbcore: registered new interface driver hub
[    2.024049@0] usbcore: registered new device driver usb
[    2.024093@0] Linux video capture interface: v2.00
[    2.024141@0] pps_core: LinuxPPS API ver. 1 registered
[    2.024151@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.024173@0] PTP clock support registered
[    2.024271@0] hdmitx: system: amhdmitx_init
[    2.024280@0] hdmitx: system: Ver: 2014May6
[    2.024398@0] hdmitx: system: amhdmitx_probe
[    2.024570@1] hdmitx: system: not find match init-data
[    2.024581@1] hdmitx: system: not find match pwr-ctl
[    2.024591@1] hdmitx hpd irq = 89
[    2.024824@1] hdmitx20: Mapped PHY: 0xc0800000
[    2.024840@1] hdmitx20: Mapped PHY: 0xc1104400
[    2.024862@1] hdmitx20: Mapped PHY: 0xc8100000
[    2.024871@1] hdmitx20: Mapped PHY: 0xc8834000
[    2.024881@1] hdmitx20: Mapped PHY: 0xc883a000
[    2.024890@1] hdmitx20: Mapped PHY: 0xc883c000
[    2.024902@1] hdmitx20: Mapped PHY: 0xd0100000
[    2.024911@1] hdmitx20: Mapped PHY: 0xda83a000
[    2.024926@1] hdmitx: alread display in uboot 0x10
[    2.024952@1] avmute set to 1
[    2.025057@1] vout_serve: vout_init_module
[    2.025126@1] vout_serve: no matched vout_init mode hdmi
[    2.025151@1] vinfo: error: invalid vinfo. current vmode is not supported
[    2.025162@1] vout_serve: create vout attribute OK
[    2.025171@1] vout_serve: meson_vout_probe OK
[    2.025228@1] logo: logo_init
[    2.025369@1] osd_rdma: osd_rdma_init: rdma_table p=0x69c41000,op=0x69c41000 , v=0xffffff80001b1000
[    2.025383@1] osd_rdma: osd rdma request irq as second interrput function!
[    2.025403@1] logo: mode chang
[    2.036799@0] vout_serve: vmode set to 480cvbs
[    2.036819@0] tv_vout: tv_set_current_vmode[764]fps_target_mode=2
[    2.036830@0] tv_vout: mode is 2,sync_duration_den=1,sync_duration_num=60
[    2.036844@0] tv_vout: TV mode 480cvbs selected.
[    2.036854@0]
[    2.036854@0] vdac_enable: on:0,module_sel:8
[    2.036871@0] enc_clk_config: mode is: 2
[    2.036879@0] enc_clk_config: config HPLL
[    2.036976@0] enc_clk_config: config HPLL done
[    3.043824@0] tv_vout: vdac open.0 = 0x1, 0x0
[    3.043833@0]
[    3.043833@0] vdac_enable: on:1,module_sel:8
[    3.043848@0] tv_vout: new mode =480cvbs set ok
[    3.043857@0] vout_serve: vinfo mode is: 480cvbs
[    3.043865@0] vout_serve: new mode 480cvbs set ok
[    3.043880@0] hdmitx: edid: not find mapped vic
[    3.043889@0] hdmitx: edid: not find mapped vic
[    3.043900@0] hdmitx: video: get current mode: 480cvbs
[    3.043908@0] hdmitx: update rx hdr info 0
[    3.043917@0] hdmitx: video: 480cvbs not valid hdmi mode
[    3.043942@0] logo: set vmode: 480cvbs
[    3.043955@0] hdmitx: edid: not find mapped vic
[    3.043963@0] hdmitx: edid: not find mapped vic
[    3.043976@0] hdmitx: video: get current mode: 480cvbs
[    3.043984@0] hdmitx: update rx hdr info 0
[    3.043991@0] hdmitx: video: 480cvbs not valid hdmi mode
[    3.044008@0] logo: outputmode changed to 480cvbs, reset osd1 scaler
[    3.088115@0] logo: finish
[    3.088247@0] Advanced Linux Sound Architecture Driver Initialized.
[    3.089221@0] Switched to clocksource arch_sys_counter
[    3.112013@1] NET: Registered protocol family 2
[    3.112369@1] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    3.112466@1] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    3.112662@1] TCP: Hash tables configured (established 16384 bind 16384)
[    3.112735@1] TCP: reno registered
[    3.112747@1] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    3.112790@1] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    3.112952@1] NET: Registered protocol family 1
[    3.113133@1] RPC: Registered named UNIX socket transport module.
[    3.113144@1] RPC: Registered udp transport module.
[    3.113153@1] RPC: Registered tcp transport module.
[    3.113161@1] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.186944@1] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    3.187020@1] audit: initializing netlink subsys (disabled)
[    3.187057@1] audit: type=2000 audit(3.160:1): initialized
[    3.191217@1] VFS: Disk quotas dquot_6.5.2
[    3.191360@1] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    3.192277@1] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    3.193205@1] NFS: Registering the id_resolver key type
[    3.193240@1] Key type id_resolver registered
[    3.193250@1] Key type id_legacy registered
[    3.193264@1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    3.193795@1] msgmni has been set to 3628
[    3.194622@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    3.194685@1] io scheduler noop registered
[    3.194695@1] io scheduler deadline registered
[    3.194719@1] io scheduler cfq registered (default)
[    3.195316@1] meson-rng c8834000.rng: hwrng registered
[    3.195400@1] [drm] Initialized drm 1.1.0 20060810
[    3.197280@1] loop: module loaded
[    3.197290@1] Loading iSCSI transport class v2.0-870.
[    3.197484@1] iscsi: registered transport (tcp)
[    3.197798@1] mtdoops: mtd device (mtddev=name/number) must be supplied
[    3.198366@1] tun: Universal TUN/TAP device driver, 1.6
[    3.198377@1] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    3.201782@1] libphy: stmmac: probed
[    3.201795@1] eth0: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
[    3.201806@1] eth0: PHY ID 001cc916 at 7 IRQ POLL (stmmac-0:07)
[    3.202012@1] PPP generic driver version 2.4.2
[    3.202100@1] NET: Registered protocol family 24
[    3.202157@1] usbcore: registered new interface driver smsc95xx
[    3.202200@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.202212@1] ehci-h20ahb: H20AHB-EHCI Host Controller driver
[    3.202308@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.202369@1] usbcore: registered new interface driver cdc_acm
[    3.202379@1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    3.202421@1] usbcore: registered new interface driver usb-storage
[    3.202506@1] usbcore: registered new interface driver usbserial
[    3.202533@1] usbcore: registered new interface driver usbserial_generic
[    3.202561@1] usbserial: USB Serial support registered for generic
[    3.202588@1] usbcore: registered new interface driver pl2303
[    3.202614@1] usbserial: USB Serial support registered for pl2303
[    3.202726@1] mousedev: PS/2 mouse device common for all mice
[    3.202816@1] i2c /dev entries driver
[    3.203413@1] ledtrig-cpu: registered to indicate activity on CPUs
[    3.203461@1] hidraw: raw HID events driver (C) Jiri Kosina
[    3.204030@1] usbcore: registered new interface driver usbhid
[    3.204039@1] usbhid: USB HID core driver
[    3.204159@1] meson_uart c81004c0.serial: ==uart0 reg addr = ffffff80001da4c0
[    3.204186@1] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart
[    3.204381@1] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff80001dc4c0
[    3.204404@1] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
[    3.204617@1] dwc_otg dwc2_b: dwc_otg_driver_probe(ffffffc065caf800)
[    3.244664@1] dwc_otg: usb1: type: 1 speed: 0, config: 0, dma: 0, id: 1, phy: c0000020, ctrl: 0
[    3.244694@1] dwc_otg dwc2_b: base=0xffffff8001600000
[    3.244699@1] dwc_otg dwc2_b: dwc_otg_device=0xffffffc065f81600
[    3.747364@1] dwc_otg: Core Release: 3.10a
[    3.747379@1] dwc_otg: Setting default values for core params
[    3.747398@1] dwc_otg: curmode: 1, host_only: 1
[    3.747415@1] dwc_otg dwc2_b: DMA config: BURST_DEFAULT
[    3.759584@1] dwc_otg: Using Buffer DMA mode
[    3.759595@1] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[    3.759605@1] dwc_otg: Working on port type = HOST
[    3.759864@1] dwc_otg dwc2_b: DWC OTG Controller
[    3.759890@1] dwc_otg dwc2_b: new USB bus registered, assigned bus number 1
[    3.759916@1] dwc_otg dwc2_b: irq 63, io mem 0x00000000
[    3.759926@1] dwc_otg: -------hcd->flags.d32 = 0
[    3.759952@1] dwc_otg: Init: Port Power? op_state=1
[    3.759961@1] dwc_otg: Init1: Power Port (0)
[    3.760128@1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.760141@1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.760155@1] usb usb1: Product: DWC OTG Controller
[    3.760165@1] usb usb1: Manufacturer: Linux 3.14.29 dwc_otg_hcd
[    3.760176@1] usb usb1: SerialNumber: dwc2_b
[    3.760479@1] hub 1-0:1.0: USB hub found
[    3.760504@1] hub 1-0:1.0: 1 port detected
[    3.760643@1] dwc_otg dwc2_a: dwc_otg_driver_probe(ffffffc065cafc00)
[    3.760681@1] dwc_otg: usb0: type: 0 speed: 0, config: 0, dma: 0, id: 0, phy: c0000000, ctrl: 0
[    3.760708@1] dwc_otg dwc2_a: base=0xffffff8001680000
[    3.760713@1] dwc_otg dwc2_a: dwc_otg_device=0xffffffc065fc0600
[    3.772301@1] dwc_otg: Core Release: 3.10a
[    3.772313@1] dwc_otg: Setting default values for core params
[    3.772330@1] dwc_otg: curmode: 1, host_only: 0
[    3.782354@1] dwc_otg dwc2_a: DMA config: BURST_DEFAULT
[    3.794517@1] dwc_otg: Using Buffer DMA mode
[    3.794527@1] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[    3.794537@1] dwc_otg: Working on port type = OTG
[    3.794546@1] dwc_otg: Current port type: SLAVE
[    3.794709@1] dwc_otg dwc2_a: DWC OTG Controller
[    3.794732@1] dwc_otg dwc2_a: new USB bus registered, assigned bus number 2
[    3.794754@1] dwc_otg dwc2_a: irq 62, io mem 0x00000000
[    3.794836@1] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    3.794849@1] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.794863@1] usb usb2: Product: DWC OTG Controller
[    3.794873@1] usb usb2: Manufacturer: Linux 3.14.29 dwc_otg_hcd
[    3.794883@1] usb usb2: SerialNumber: dwc2_a
[    3.795162@1] hub 2-0:1.0: USB hub found
[    3.795184@1] hub 2-0:1.0: 1 port detected
[    3.795297@1] dwc_otg: Dedicated Tx FIFOs mode
[    3.795549@1] dwc_otg: using timer detectid change, ffffffc065f23000
[    3.795763@1] hdmitx: system: hdmitx_hdcp_init
[    3.795863@1] ESM HLD: Initializing...
[    3.795873@1] ESM HLD: Registering device range 'esm'...
[    3.795888@1] ESM HLD: Device range 'esm' has been registered.
[    3.795897@1] ESM HLD: Creating class /sys/class/elliptic...
[    3.795920@1] ESM HLD: The class /sys/class/elliptic has been created.
[    3.795930@1] ESM HLD: Creating device 'esm'...
[    3.796007@1] ESM HLD: Device 'esm' has been created.
[    3.796016@1] ESM HLD: Done initializing the HLD driver.
[    3.806177@1] BLASTER Driver Init
[    3.806288@1] secmon has 1 memory regions
[    3.806325@1] secmon: share in base: 0xffffff8000402000, share out base: 0xffffff8000404000
[    3.806342@1] secmon secmon.4: assigned reserved memory node linux,secmon ok
[    3.806352@1] secmon: probe done
[    3.806451@1] storage: storage in base: 0xffffff8001700000
[    3.806461@1] storage: storage out base: 0xffffff8001780000
[    3.806470@1] storage: storage block base: 0xffffff8001800000
[    3.806478@1] storage: probe done!
[    3.806998@1] aml_sd_emmc_probe: line 3558
[    3.807008@1] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
[    3.808470@1] aml_sd_emmc_reg_init 1146
[    3.808549@1] get property:                ocr_avail, value:0x00200080
[    3.808560@1] get property:                    f_min, value:400000
[    3.808571@1] get property:                    f_max, value:100000000
[    3.808582@1] get property:             max_req_size, value:0x00020000
[    3.808592@1] get property:                   irq_in, value:3
[    3.808602@1] get property:                  irq_out, value:5
[    3.808625@1] get property:                  gpio_cd, str:
[    3.808636@1] get property:                  pinname, str:sd
[    3.808647@1] get property:                 jtag_pin, str:
[    3.808659@1] get property:               vol_switch, str:
[    3.808668@1] get property:            vol_switch_18, value:1
[    3.808678@1] get property:         vol_switch_delay, value:150
[    3.808687@1] get property:                card_type, value:5
[    3.808698@1] get property:                gpio_dat3, str:
[    3.808716@1] sd:pdata->caps = 7
[    3.808724@1] sd:pdata->caps2 = 0
[    3.840391@1] [aml_is_card_insert] card OUT
[    3.840514@1] [aml_is_card_insert] card OUT
[    3.840531@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
[    3.840562@1] aml_sd_emmc_probe: line 3558
[    3.841982@1] aml_sd_emmc_reg_init 1146
[    3.842082@1] get property:                ocr_avail, value:0x00200080
[    3.842093@1] get property:                    f_min, value:400000
[    3.842103@1] get property:                    f_max, value:100000000
[    3.842115@1] get property:             max_req_size, value:0x00020000
[    3.842128@1] get property:                  pinname, str:emmc
[    3.842140@1] get property:                card_type, value:1
[    3.842150@1] get property:                 tx_phase, value:0
[    3.842171@1] get property:                gpio_dat3, str:
[    3.842182@1] get property:                 hw_reset, str:
[    3.842210@1] emmc:pdata->caps = c0000d47
[    3.842223@1] emmc:pdata->caps2 = 8021
[    3.842245@1] storage 0, boot 1
[    3.842253@1] get_storage_dev return 1
[    3.879239@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
[    3.879416@1] ion_dev has 1 memory regions
[    3.881505@1] fb: osd_init_module
[    3.881566@1] fb: viu vsync irq: 35
[    3.881577@1] meson-fb has 1 memory regions
[    3.881603@1] meson-fb meson-fb.14: assigned reserved memory node linux,meson-fb ok
[    3.881624@1] fb: osd_probe vinfo:ffffffc0020618b0
[    3.881635@1] fb: init fbdev bpp is:32
[    3.888925@0] fb: osd probe OK
[    3.888999@0] ge2d: ge2d_init_module
[    3.889012@0] ge2d: ge2d_dev major:245
[    3.889161@0] ge2d: ge2d clock is 400 MHZ
[    3.889171@0] ge2d: ge2d: pdev=ffffffc065c3ba00, irq=182, rstc=0xffffffc065fe3700, clk=ffffffc0103b0b00
[    3.889211@0] ge2d: mapped phy: 0xd0160000
[    3.889239@0] ge2d: ge2d start monitor
[    3.889305@2] ge2d: ge2d workqueue monitor start
[    3.889398@0] codec:Amlogic A/V streaming port init
[    3.890069@0] codec:get gate demux control ok ffffffc065fedc80
[    3.890083@0] codec:get gate parser_top control ok ffffffc065fedd00
[    3.890095@0] codec:get gate vpu_intr control ok ffffffc065fedd80
[    3.890110@0] codec:get gate vdec control ok ffffffc065fede00
[    3.890287@0] codec:[tsync_pcr_init]init success.
[    3.890297@0] codec:amvideocap_init_module
[    3.890357@0] codec:amvideocap_probe,amvideocap
[    3.890367@0] codec:use cma buf.
[    3.890375@0] codec:amvideocap_dev_register
[    3.890914@0] amvenc_avc_probe -- reserved memory config fail.
[    3.890925@0] amvenc_avc - cma memory pool size: 40 MB
[    3.890946@0] encode_wq_init.
[    3.890956@0] encode start monitor.
[    3.891021@1] encode workqueue monitor start.
[    3.891209@0] jpegenc module init
[    3.891310@0] codec:picdec_driver_probe called.
[    3.891320@0] picdec has 1 memory regions
[    3.891346@0] codec:picdec_driver_probe done.
[    3.891744@0] codec:create_ge2d_work_queue video task ok
[    3.891935@0] codec:register clk_set_setting cpu[31]
[    3.892195@0] DI: di_module_init ok.
[    3.892211@0] DI: di_module_init: major 239
[    3.892349@0] DI: di_probe
[    3.892456@0] deinterlace has 1 memory regions
[    3.892491@0] DI: di reveser memory 0x7c900000, size 30MB.
[    3.892501@0] deinterlace deinterlace.26: assigned reserved memory node linux,di ok
[    3.892530@0] di_irq:78,timerc_irq:38
[    3.892760@0] rdma_register, rdma_table_addr ffffff800041a000 rdma_table_addr_phy 69c4a000 reg_buf ffffffc065ffe000
[    3.892776@0] rdma_register success, handle 1 table_size 8192
[    3.892786@0] DI: di_probe allocate rdma channel 1.
[    3.892796@0] DI: DI hw version 2.
[    3.892811@0] 0x000000db:Y=db,U=0,V=0
[    3.892819@0] 0x000000dc:Y=dc,U=0,V=0
[    3.892827@0] 0x000000dd:Y=dd,U=0,V=0
[    3.892834@0] 0x000000de:Y=de,U=0,V=0
[    3.892842@0] 0x000000df:Y=df,U=0,V=0
[    3.892850@0] 0x000000e0:Y=e0,U=0,V=0
[    3.892857@0] 0x000000e1:Y=e1,U=0,V=0
[    3.892865@0] 0x000000e2:Y=e2,U=0,V=0
[    3.892872@0] 0x000000e3:Y=e3,U=0,V=0
[    3.892880@0] 0x000000f0:Y=f0,U=0,V=0
[    3.892889@0] 0x000000f1:Y=f1,U=0,V=0
[    3.892897@0] 0x000000f2:Y=f2,U=0,V=0
[    3.892904@0] 0x000000f3:Y=f3,U=0,V=0
[    3.892912@0] 0x000000f4:Y=f4,U=0,V=0
[    3.892919@0] 0x000000f5:Y=f5,U=0,V=0
[    3.892927@0] 0x000000f6:Y=f6,U=0,V=0
[    3.892936@0] 0x000000f7:Y=f7,U=0,V=0
[    3.892944@0] 0x000000f8:Y=f8,U=0,V=0
[    3.892951@0] 0x000000f9:Y=f9,U=0,V=0
[    3.892959@0] 0x000000fa:Y=fa,U=0,V=0
[    3.892966@0] 0x000000fb:Y=fb,U=0,V=0
[    3.892974@0] 0x000000fc:Y=fc,U=0,V=0
[    3.893109@0] DI: di_probe here.
[    3.893272@0] efusekeynum: 4
[    3.893285@0] efusekeyname:             mac  offset:     0   size:     6
[    3.893298@0] efusekeyname:          mac_bt  offset:     6   size:     6
[    3.893311@0] efusekeyname:        mac_wifi  offset:    12   size:     6
[    3.893324@0] efusekeyname:            usid  offset:    18   size:    16
[    3.893432@0] efuse efuse.10: probe OK!
[    3.893565@0] 
6aml_unifykeys_init done!
[    3.893574@0] PPMGRDRV: warn: ppmgr module init func called
[    3.893620@0] PPMGRDRV: err: ppmgr_driver_probe called
[    3.893630@0] ppmgr has 1 memory regions
[    3.893653@0] PPMGRDRV: info: ppmgr_dev major:237
[    3.893746@0] PPMGRDRV: info: ppmgr_probe done
[    3.893858@0] audio_dsp: [dsp]register dsp to char divece(257)
[    3.894115@0] amaudio: amaudio: driver amaudio succuess!
[    3.894126@0] amlvid:err: amlvideo_init called
[    3.894133@0] amlvid:err: amlvideo_create_instance called
[    3.894144@0] amlvid:err: v4l2_dev.name=:amlvideo-000
[    3.894229@0] amlvideo-000: V4L2 device registered as video10
[    3.894319@0] [RX]-hdmirx: hdmirx_init.
[    3.894327@0] ESM HLD: Initializing...
[    3.894336@0] ESM HLD: Registering device range 'esm_rx'...
[    3.894348@0] ESM HLD: Device range 'esm_rx' has been registered.
[    3.894358@0] ESM HLD: Creating class /sys/class/elliptic_rx...
[    3.894376@0] ESM HLD: The class /sys/class/elliptic_rx has been created.
[    3.894387@0] ESM HLD: Creating device 'esm_rx'...
[    3.894445@0] ESM HLD: Device 'esm_rx' has been created.
[    3.894455@0] ESM HLD: Done initializing the HLD driver.
[    3.894556@0] saradc c1108680.saradc: initialized by BL30
[    3.894574@0] saradc c1108680.saradc: calibration start:
[    3.894622@0] saradc c1108680.saradc: nominal=0, value=5
[    3.894669@0] saradc c1108680.saradc: nominal=256, value=252
[    3.894714@0] saradc c1108680.saradc: nominal=512, value=508
[    3.894761@0] saradc c1108680.saradc: nominal=768, value=763
[    3.894808@0] saradc c1108680.saradc: nominal=1023, value=1018
[    3.894819@0] saradc c1108680.saradc: calibration end: coef=4104
[    3.894866@0] remote: Driver init
[    3.894989@0] m1-adckp adc_keypad.42: adc_key: faild to get name_len!
[    3.895012@0] m1-adckp adc_keypad.42: menu key(139) registed.
[    3.895023@0] m1-adckp adc_keypad.42: vol- key(114) registed.
[    3.895034@0] m1-adckp adc_keypad.42: vol+ key(115) registed.
[    3.895044@0] m1-adckp adc_keypad.42: esc key(1) registed.
[    3.895055@0] m1-adckp adc_keypad.42: home key(102) registed.
[    3.895155@0] input: adc_keypad as /devices/adc_keypad.42/input/input0
[    3.895365@0] gpio-key gpio_keypad.41: gpio_key: 0 name(power) pin()
[    3.895378@0] gpio-key gpio_keypad.41: amlogic_gpio_name_map_num pin 0!::
[    3.895396@0] gpio-key gpio_keypad.41: gpio_key: 0 power(125)
[    3.895423@0] gpio-key gpio_keypad.41: start setup_timer
[    3.895435@0] gpio-key gpio_keypad.41: power key(116) registed.
[    3.895524@0] input: gpio_keypad as /devices/gpio_keypad.41/input/input1
[    3.895593@0] gpio-key gpio_keypad.41: gpio keypad register input device completed.
[    3.895610@0] input input1: gpio keypad major:234
[    3.895856@0] cpuinfo: probe done
[    3.896208@0] input: cec_input as /devices/virtual/input/input2
[    3.896344@0] cectx c810023c.aocec: aml_cec_probe(): no hdmirx reg resource
[    3.896356@0] cectx c810023c.aocec: aml_cec_probe(): no hhi reg resource
[    3.896414@0] cectx c810023c.aocec: aml_cec_probe(): can't find hdmirx
[    3.897562@0] cec: wake up flag:0
[    3.897776@0] usbcore: registered new interface driver snd-usb-audio
[    3.898872@0] aml_pcm_dai: pcm mode detection =1
[    3.899457@0] aml_snd_card: headphone detection disable=1
[    3.899468@0] aml_snd_card: no spk event delay time set
[    3.901436@0] aml_snd_m8_card aml_m8_snd.40: dummy <-> I2S.33 mapping ok
[    3.903348@0] aml_snd_m8_card aml_m8_snd.40: dit-hifi <-> SPDIF.34 mapping ok
[    3.903481@0] aml_pcm: enter aml_pcm_new dai->name: PCM.35 dai->id: 0
[    3.903869@0] aml_snd_m8_card aml_m8_snd.40: pcm2bt-pcm <-> PCM.35 mapping ok
[    3.907047@0] aml_snd_card: audio use jtag pinmux as i2s output, read val =ffffffff
[    3.911372@0] TCP: cubic registered
[    3.911718@0] NET: Registered protocol family 10
[    3.912217@0] NET: Registered protocol family 17
[    3.912275@0] Key type dns_resolver registered
[    3.912958@0] Registering SWP/SWPB emulation handler
[    3.913218@0] registered taskstats version 1
[    3.913835@0] bio: create slab <bio-1> at 1
[    3.914308@0] Btrfs loaded
[    3.914381@0] BTRFS: selftest: Running btrfs free space cache tests
[    3.914392@0] BTRFS: selftest: Running extent only tests
[    3.914414@0] BTRFS: selftest: Running bitmap only tests
[    3.914435@0] BTRFS: selftest: Running bitmap and extent tests
[    3.914461@0] BTRFS: selftest: Free space cache tests finished
[    3.914471@0] BTRFS: selftest: Running extent buffer operation tests
[    3.914480@0] BTRFS: selftest: Running btrfs_split_item tests
[    3.914525@0] BTRFS: selftest: Running find delalloc tests
[    3.943338@1] emmc: BKOPS_EN bit is not set
[    3.949611@1] emmc: clk 100000000 SDR mode tuning start
[    3.949850@1] emmc: rx_tuning_result[0] = 10
[    3.950076@1] emmc: rx_tuning_result[1] = 10
[    3.950307@1] emmc: rx_tuning_result[2] = 10
[    3.950540@1] emmc: rx_tuning_result[3] = 10
[    3.950770@1] emmc: rx_tuning_result[4] = 10
[    3.950992@1] emmc: rx_tuning_result[5] = 10
[    3.951225@1] emmc: rx_tuning_result[6] = 10
[    3.951451@1] emmc: rx_tuning_result[7] = 10
[    3.951682@1] emmc: rx_tuning_result[8] = 10
[    3.951909@1] emmc: rx_tuning_result[9] = 10
[    3.951919@1] emmc: best_win_start =0, best_win_size =10
[    3.951929@1] emmc: sd_emmc_regs->gclock=0x100024a,sd_emmc_regs->gadjust=0x2000
[    3.951942@1] emmc: gclock =0x100024a, gdelay=0x85854055, gadjust=0x2000
[    3.952033@1] emmc: support driver strength type 1
[    3.952081@1] emmc: try set sd/emmc to DDR mode
[    3.952092@1] emmc: try set sd/emmc to DDR mode
[    3.952173@1] emmc: new HS400 MMC card at address 0001
[    3.952183@1] emmc: clock 100000000, 8-bit-bus-width
[    3.952183@1]
[    3.952547@1] mmcblk0: emmc:0001 8GND3R 7.28 GiB
[    3.952675@1] mmcblk0rpmb: emmc:0001 8GND3R partition 3 512 KiB
[    3.953170@1]  mmcblk0: p1 p2
[    3.953683@1] clear_emmc_wait_flag
[    3.959349@1] dwc_otg: Indeed it is in host mode hprt0 = 00021501
[    3.989288@0] input input1: key 116 down
[    4.139322@1] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    4.139592@1] dwc_otg: Indeed it is in host mode hprt0 = 00001101
[    4.158119@0] BTRFS: selftest: Running btrfs_get_extent tests
[    4.158284@0] BTRFS: selftest: Running hole first btrfs_get_extent test
[    4.219325@0] regulator-dummy: disabling
[    4.219455@0] console [netcon0] enabled
[    4.219464@0] netconsole: network logging started
[    4.219476@0] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    4.220402@0] cpufreq-scpi cpufreq-meson.7: enter  cpufreq
[    4.220437@0] cpufreq-scpi cpufreq-meson.7: probe  cpufreq okay
[    4.221517@0] gxbb_pm: enter meson_pm_probe!
[    4.221553@0] gxbb_pm: meson_pm_probe done
[    4.221898@0] cpucore_cooling_register, max_cpu_core_num:4
[    4.229567@0] ALSA device list:
[    4.229576@0]   #0: AML-M8AUDIO
[    4.231404@0] Freeing unused kernel memory: 3652K (ffffffc001c35000 - ffffffc001fc6000)
[    4.253701@1] fb: osd[0] enable: 1 (platform_init)
[    4.307543@3] fb: Frame buffer memory assigned at
[    4.307556@3] fb:  0, phy: 0x000000007e700000, vir:0xffffff8001a80000, size=24576K
[    4.307556@3]
[    4.307564@3] fb: ---------------clear fb0 memory ffffff8001a80000
[    4.321173@3] fb: osd[0] canvas.idx =0x40
[    4.321177@3] fb: osd[0] canvas.addr=0x7e700000
[    4.321181@3] fb: osd[0] canvas.width=7680
[    4.321184@3] fb: osd[0] canvas.height=2160
[    4.321187@3] fb: osd[0] frame.width=1920
[    4.321190@3] fb: osd[0] frame.height=1080
[    4.340566@1] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
[    4.340577@1] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    4.340582@1] usb 1-1: Product: USB2.0 Hub
[    4.340815@3] fb: Frame buffer memory assigned at
[    4.340822@3] fb:  1, phy: 0x000000007ff00000, vir:0xffffff8003300000, size=1024K
[    4.340822@3]
[    4.340828@3] fb: fb1 open, logo index:1
[    4.341094@1] hub 1-1:1.0: USB hub found
[    4.341309@1] vfm_map_store:rm default
[    4.341309@1]
[    4.341358@1] vfm_map_store:add default decoder ppmgr deinterlace amvideo
[    4.341358@1]
[    4.341379@1] hub 1-1:1.0: 4 ports detected
[    4.372700@1] Console: switching to colour frame buffer device 90x30
[    4.454622@1] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[    4.454876@1] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[    4.461938@1] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    5.082015@0] random: nonblocking pool is initialized
[    5.386740@3] systemd[1]: System time before build time, advancing clock.
[    5.401827@1] systemd[1]: systemd 232 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[    5.402094@1] systemd[1]: Detected architecture arm64.
[    5.403309@1] systemd[1]: Set hostname to <LibreELEC>.
[    5.445711@1] systemd[1]: Created slice System Slice.
[    5.447294@1] systemd[1]: Mounting Debug File System...
[    5.448340@1] systemd[1]: Listening on Journal Socket.
[    5.448833@1] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    5.451159@1] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    5.451686@1] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.452191@1] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.454136@1] systemd[1]: Starting Setup machine-id...
[    5.454489@1] systemd[1]: Reached target Swap.
[    5.456105@1] systemd[1]: Mounting Temporary Directory...
[    5.459462@1] systemd[1]: Starting Load Kernel Modules...
[    5.461557@1] systemd[1]: Starting Show Version...
[    5.464344@1] systemd[1]: Mounting POSIX Message Queue File System...
[    5.464863@1] systemd[1]: Created slice User and Session Slice.
[    5.465119@1] systemd[1]: Reached target Slices.
[    5.465517@1] systemd[1]: Listening on udev Control Socket.
[    5.467291@1] systemd[1]: Starting Remount Root and Kernel File Systems...
[    5.467900@1] systemd[1]: Listening on udev Kernel Socket.
[    5.470843@1] systemd[1]: Mounting Variable Directory...
[    5.475305@1] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.475717@1] systemd[1]: Reached target Paths.
[    5.476299@1] systemd[1]: Listening on RPCbind Server Activation Socket.
[    5.476695@1] systemd[1]: Reached target RPC Port Mapper.
[    5.481203@1] systemd[1]: Mounted Debug File System.
[    5.481592@2] mali-utgard d00c0000.mali: max clk set 4
[    5.481601@2] mali-utgard d00c0000.mali: turbo clk set to 5
[    5.481619@1] systemd[1]: Mounted POSIX Message Queue File System.
[    5.481997@1] systemd[1]: Mounted Variable Directory.
[    5.483461@0] gpu cooling register okay with err=0
[    5.483521@0] gpu core cooling register okay with err=0
[    5.483786@0] Mali: Mali device driver loaded
[    5.484496@1] systemd[1]: Mounted Temporary Directory.
[    5.485619@0] Registered IR keymap rc-empty
[    5.485773@0] input: meson-ir as /devices/c8100580.meson-ir/rc/rc0/input3
[    5.487084@0] rc0: meson-ir as /devices/c8100580.meson-ir/rc/rc0
[    5.487571@1] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    5.490623@1] systemd[1]: Started Setup machine-id.
[    5.491110@0] IR NEC protocol handler initialized
[    5.491554@2] IR RC5(x) protocol handler initialized
[    5.492769@3] IR RC6 protocol handler initialized
[    5.493684@1] systemd[1]: Started Show Version.
[    5.494285@2] IR Sony protocol handler initialized
[    5.494287@0] IR JVC protocol handler initialized
[    5.495331@3] IR SANYO protocol handler initialized
[    5.495983@3] meson-ir c8100580.meson-ir: receiver initialized
[    5.496673@1] systemd[1]: Started Remount Root and Kernel File Systems.
[    5.498197@0] input: MCE IR Keyboard/Mouse (meson-ir) as /devices/virtual/input/input4
[    5.498406@0] IR MCE Keyboard/mouse protocol handler initialized
[    5.499394@3] lirc_dev: IR Remote Control driver registered, major 231
[    5.499638@1] systemd[1]: Started Load Kernel Modules.
[    5.499996@3] rc rc0: lirc_dev: driver ir-lirc-codec (meson-ir) registered at minor = 0
[    5.499998@3] IR LIRC bridge handler initialized
[    5.505272@1] systemd[1]: Starting Apply Kernel Variables...
[    5.509848@1] systemd[1]: Starting udev Coldplug all Devices...
[    5.513553@1] systemd[1]: Starting Journal Service...
[    5.517459@1] systemd[1]: Starting Create Static Device Nodes in /dev...
[    5.521046@1] systemd[1]: Starting Setup Timezone data...
[    5.526142@1] systemd[1]: Started Apply Kernel Variables.
[    5.528686@1] systemd[1]: Started Create Static Device Nodes in /dev.
[    5.533944@1] systemd[1]: Reached target Local File Systems (Pre).
[    5.535984@1] systemd[1]: Reached target Local File Systems.
[    5.538348@1] systemd[1]: Started Setup Timezone data.
[    5.573170@3] systemd[1]: Started Journal Service.
[    5.588661@0] systemd-journald[202]: Received request to flush runtime journal from PID 1
[    6.252216@2] Console: switching to colour dummy device 80x25
[    6.461742@3] rtc-pcf8563 1-0051: chip found, driver version 0.4.3
[    6.461843@3] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[    6.461849@3] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
[    6.461902@3] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[    6.461907@3] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
[    6.461958@3] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[    6.461963@3] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
[    6.461969@3] rtc-pcf8563 1-0051: pcf8563_get_datetime: read error
[    6.463604@3] rtc-pcf8563 1-0051: rtc core: registered rtc-pcf8563 as rtc0
[    6.633238@2] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[    6.633254@2] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
[    6.633306@2] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[    6.633312@2] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
[    6.633363@2] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[    6.633369@2] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
[    6.633375@2] rtc-pcf8563 1-0051: pcf8563_get_datetime: read error
[    6.699008@2] 8021q: 802.1Q VLAN Support v1.8
[    6.710117@3] input: lircd-uinput as /devices/virtual/input/input6
[    7.000634@2] input: eventlircd as /devices/virtual/input/input8
[    7.240168@1] kodi.bin[361]: unhandled input address range fault (11) at 0x676e69000068, esr 0x83000004
[    7.240180@1] pgd = ffffffc05f787000
[    7.240184@1] [676e69000068] *pgd=0000000000000000
[    7.240189@1]
[    7.240195@1] CPU: 1 PID: 361 Comm: kodi.bin Tainted: G           O 3.14.29 #1
[    7.240201@1] task: ffffffc055322c40 ti: ffffffc066650000 task.ti: ffffffc066650000
[    7.240213@1] PC is at 0x676e69000068
[    7.240217@1] LR is at 0x8b43ac
[    7.240221@1] pc : [<0000676e69000068>] lr : [<00000000008b43ac>] pstate: 80000000
[    7.240224@1] sp : 0000007fd1df6970
[    7.240227@1] x29: 0000000000000000 x28: 0000000000000000
[    7.240232@1] x27: 0000000000000000 x26: 0000000001aee8a0
[    7.240237@1] x25: 0000000000000001 x24: 0000007fab96a000
[    7.240241@1] x23: 0000007fab96b4c8 x22: 0000007fad5c7c60
[    7.240246@1] x21: 0000000001b147d8 x20: 0000000001c504c8
[    7.240251@1] x19: 0000000001c504c8 x18: 0000000000000000
[    7.240256@1] x17: 0000007fad57af38 x16: 000000000196c078
[    7.240260@1] x15: 0000000000000000 x14: 0000000000000001
[    7.240265@1] x13: ff00000000000000 x12: 0000000000000000
[    7.240270@1] x11: 0000000000000038 x10: 000000000000000a
[    7.240274@1] x9 : 0000000001bf1fa0 x8 : 0000000000000000
[    7.240280@1] x7 : ffffffffffffffff x6 : 0000000000000169
[    7.240284@1] x5 : 0000000000000169 x4 : 0000000000000021
[    7.240289@1] x3 : 0000000000000000 x2 : 0000676e69000068
[    7.240294@1] x1 : 0000000001c504c8 x0 : 0000000001c50460
[    7.240298@1]
[    8.750164@1] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.679486@1] libphy: stmmac-0:00 - Link is Up - 100/Full
[    9.679508@1] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   11.850281@0] kodi.bin[511]: unhandled input address range fault (11) at 0x676e69000068, esr 0x83000004
[   11.850296@0] pgd = ffffffc06027c000
[   11.850300@0] [676e69000068] *pgd=0000000000000000
[   11.850305@0]
[   11.850312@0] CPU: 0 PID: 511 Comm: kodi.bin Tainted: G           O 3.14.29 #1
[   11.850317@0] task: ffffffc06016ec40 ti: ffffffc066384000 task.ti: ffffffc066384000
[   11.850330@0] PC is at 0x676e69000068
[   11.850334@0] LR is at 0x8b43ac
[   11.850338@0] pc : [<0000676e69000068>] lr : [<00000000008b43ac>] pstate: 80000000
[   11.850341@0] sp : 0000007ffefaa6c0
[   11.850345@0] x29: 0000000000000000 x28: 0000000000000000
[   11.850350@0] x27: 0000000000000000 x26: 0000000001aee8a0
[   11.850355@0] x25: 0000000000000001 x24: 0000007f90cc9000
[   11.850360@0] x23: 0000007f90cca4c8 x22: 0000007f92926c60
[   11.850364@0] x21: 0000000001b147d8 x20: 0000000001c504c8
[   11.850369@0] x19: 0000000001c504c8 x18: 0000000000000000
[   11.850374@0] x17: 0000007f928d9f38 x16: 000000000196c078
[   11.850378@0] x15: 0000000000000000 x14: 0000000000000001
[   11.850383@0] x13: ff00000000000000 x12: 0000000000000000
[   11.850388@0] x11: 0000000000000038 x10: 000000000000000a
[   11.850393@0] x9 : 0000000001bf1fa0 x8 : 0000000000000000
[   11.850397@0] x7 : ffffffffffffffff x6 : 00000000000001ff
[   11.850402@0] x5 : 00000000000001ff x4 : 0000000000000021
[   11.850407@0] x3 : 0000000000000000 x2 : 0000676e69000068
[   11.850415@0] x1 : 0000000001c504c8 x0 : 0000000001c50460
[   11.850419@0]
[   16.252328@0] kodi.bin[549]: unhandled input address range fault (11) at 0x676e69000068, esr 0x83000004
[   16.252345@0] pgd = ffffffc055090000
[   16.252349@0] [676e69000068] *pgd=0000000000000000
[   16.252354@0]
[   16.252362@0] CPU: 0 PID: 549 Comm: kodi.bin Tainted: G           O 3.14.29 #1
[   16.252367@0] task: ffffffc06025a000 ti: ffffffc066238000 task.ti: ffffffc066238000
[   16.252379@0] PC is at 0x676e69000068
[   16.252383@0] LR is at 0x8b43ac
[   16.252387@0] pc : [<0000676e69000068>] lr : [<00000000008b43ac>] pstate: 80000000
[   16.252391@0] sp : 0000007fca2c0d10
[   16.252394@0] x29: 0000000000000000 x28: 0000000000000000
[   16.252399@0] x27: 0000000000000000 x26: 0000000001aee8a0
[   16.252404@0] x25: 0000000000000001 x24: 0000007f7dddf000
[   16.252409@0] x23: 0000007f7dde04c8 x22: 0000007f7fa3cc60
[   16.252413@0] x21: 0000000001b147d8 x20: 0000000001c504c8
[   16.252418@0] x19: 0000000001c504c8 x18: 0000000000000000
[   16.252423@0] x17: 0000007f7f9eff38 x16: 000000000196c078
[   16.252428@0] x15: 0000000000000000 x14: 0000000000000001
[   16.252432@0] x13: ff00000000000000 x12: 0000000000000000
[   16.252437@0] x11: 0000000000000038 x10: 000000000000000a
[   16.252442@0] x9 : 0000000001bf1fa0 x8 : 0000000000000000
[   16.252446@0] x7 : ffffffffffffffff x6 : 0000000000000225
[   16.252451@0] x5 : 0000000000000225 x4 : 0000000000000021
[   16.252456@0] x3 : 0000000000000000 x2 : 0000676e69000068
[   16.252464@0] x1 : 0000000001c504c8 x0 : 0000000001c50460
[   16.252469@0]
[   20.648168@0] kodi.bin[586]: unhandled input address range fault (11) at 0x676e69000068, esr 0x83000004
[   20.648180@0] pgd = ffffffc065353000
[   20.648185@0] [676e69000068] *pgd=0000000000000000
[   20.648189@0]
[   20.648196@0] CPU: 0 PID: 586 Comm: kodi.bin Tainted: G           O 3.14.29 #1
[   20.648201@0] task: ffffffc0551f0000 ti: ffffffc066184000 task.ti: ffffffc066184000
[   20.648213@0] PC is at 0x676e69000068
[   20.648217@0] LR is at 0x8b43ac
[   20.648221@0] pc : [<0000676e69000068>] lr : [<00000000008b43ac>] pstate: 80000000
[   20.648224@0] sp : 0000007ffabf6160
[   20.648228@0] x29: 0000000000000000 x28: 0000000000000000
[   20.648233@0] x27: 0000000000000000 x26: 0000000001aee8a0
[   20.648237@0] x25: 0000000000000001 x24: 0000007f83004000
[   20.648242@0] x23: 0000007f830054c8 x22: 0000007f84c61c60
[   20.648248@0] x21: 0000000001b147d8 x20: 0000000001c504c8
[   20.648253@0] x19: 0000000001c504c8 x18: 0000000000000000
[   20.648262@0] x17: 0000007f84c14f38 x16: 000000000196c078
[   20.648267@0] x15: 0000000000000000 x14: 0000000000000001
[   20.648271@0] x13: ff00000000000000 x12: 0000000000000000
[   20.648276@0] x11: 0000000000000038 x10: 000000000000000a
[   20.648281@0] x9 : 0000000001bf1fa0 x8 : 0000000000000000
[   20.648286@0] x7 : ffffffffffffffff x6 : 000000000000024a
[   20.648290@0] x5 : 000000000000024a x4 : 0000000000000021
[   20.648295@0] x3 : 0000000000000000 x2 : 0000676e69000068
[   20.648300@0] x1 : 0000000001c504c8 x0 : 0000000001c50460
[   20.648305@0]
[   25.121085@0] kodi.bin[623]: unhandled input address range fault (11) at 0x676e69000068, esr 0x83000004
[   25.121097@0] pgd = ffffffc0552cc000
[   25.121101@0] [676e69000068] *pgd=0000000000000000
[   25.121106@0]
[   25.121114@0] CPU: 0 PID: 623 Comm: kodi.bin Tainted: G           O 3.14.29 #1
[   25.121118@0] task: ffffffc0652ecc40 ti: ffffffc0660f8000 task.ti: ffffffc0660f8000
[   25.121131@0] PC is at 0x676e69000068
[   25.121135@0] LR is at 0x8b43ac
[   25.121139@0] pc : [<0000676e69000068>] lr : [<00000000008b43ac>] pstate: 80000000
[   25.121142@0] sp : 0000007feebba030
[   25.121145@0] x29: 0000000000000000 x28: 0000000000000000
[   25.121150@0] x27: 0000000000000000 x26: 0000000001aee8a0
[   25.121155@0] x25: 0000000000000001 x24: 0000007f8198f000
[   25.121159@0] x23: 0000007f819904c8 x22: 0000007f835ecc60
[   25.121164@0] x21: 0000000001b147d8 x20: 0000000001c504c8
[   25.121169@0] x19: 0000000001c504c8 x18: 0000000000000000
[   25.121174@0] x17: 0000007f8359ff38 x16: 000000000196c078
[   25.121179@0] x15: 0000000000000000 x14: 0000000000000001
[   25.121184@0] x13: ff00000000000000 x12: 0000000000000000
[   25.121188@0] x11: 0000000000000038 x10: 000000000000000a
[   25.121193@0] x9 : 0000000001bf1fa0 x8 : 0000000000000000
[   25.121202@0] x7 : ffffffffffffffff x6 : 000000000000026f
[   25.121207@0] x5 : 000000000000026f x4 : 0000000000000021
[   25.121212@0] x3 : 0000000000000000 x2 : 0000676e69000068
[   25.121216@0] x1 : 0000000001c504c8 x0 : 0000000001c50460
[   25.121220@0]
[   29.523922@0] kodi.bin[663]: unhandled input address range fault (11) at 0x676e69000068, esr 0x83000004
[   29.523934@0] pgd = ffffffc0552b9000
[   29.523938@0] [676e69000068] *pgd=0000000000000000
[   29.523943@0]
[   29.523950@0] CPU: 0 PID: 663 Comm: kodi.bin Tainted: G           O 3.14.29 #1
[   29.523955@0] task: ffffffc0551f0000 ti: ffffffc0667dc000 task.ti: ffffffc0667dc000
[   29.523968@0] PC is at 0x676e69000068
[   29.523972@0] LR is at 0x8b43ac
[   29.523976@0] pc : [<0000676e69000068>] lr : [<00000000008b43ac>] pstate: 80000000
[   29.523979@0] sp : 0000007fc7c17980
[   29.523982@0] x29: 0000000000000000 x28: 0000000000000000
[   29.523987@0] x27: 0000000000000000 x26: 0000000001aee8a0
[   29.523992@0] x25: 0000000000000001 x24: 0000007f8848f000
[   29.524001@0] x23: 0000007f884904c8 x22: 0000007f8a0ecc60
[   29.524007@0] x21: 0000000001b147d8 x20: 0000000001c504c8
[   29.524011@0] x19: 0000000001c504c8 x18: 0000000000000000
[   29.524016@0] x17: 0000007f8a09ff38 x16: 000000000196c078
[   29.524021@0] x15: 0000000000000000 x14: 0000000000000001
[   29.524026@0] x13: ff00000000000000 x12: 0000000000000000
[   29.524030@0] x11: 0000000000000038 x10: 000000000000000a
[   29.524035@0] x9 : 0000000001bf1fa0 x8 : 0000000000000000
[   29.524040@0] x7 : ffffffffffffffff x6 : 0000000000000297
[   29.524044@0] x5 : 0000000000000297 x4 : 0000000000000021
[   29.524049@0] x3 : 0000000000000000 x2 : 0000676e69000068
[   29.524054@0] x1 : 0000000001c504c8 x0 : 0000000001c50460
[   29.524058@0]
[   33.897024@1] kodi.bin[702]: unhandled input address range fault (11) at 0x676e69000068, esr 0x83000004
[   33.897036@1] pgd = ffffffc055351000
[   33.897040@1] [676e69000068] *pgd=0000000000000000
[   33.897045@1]
[   33.897052@1] CPU: 1 PID: 702 Comm: kodi.bin Tainted: G           O 3.14.29 #1
[   33.897057@1] task: ffffffc06016ec40 ti: ffffffc066718000 task.ti: ffffffc066718000
[   33.897069@1] PC is at 0x676e69000068
[   33.897073@1] LR is at 0x8b43ac
[   33.897077@1] pc : [<0000676e69000068>] lr : [<00000000008b43ac>] pstate: 80000000
[   33.897080@1] sp : 0000007fe0457790
[   33.897083@1] x29: 0000000000000000 x28: 0000000000000000
[   33.897088@1] x27: 0000000000000000 x26: 0000000001aee8a0
[   33.897093@1] x25: 0000000000000001 x24: 0000007f9a825000
[   33.897098@1] x23: 0000007f9a8264c8 x22: 0000007f9c482c60
[   33.897103@1] x21: 0000000001b147d8 x20: 0000000001c504c8
[   33.897108@1] x19: 0000000001c504c8 x18: 0000000000000000
[   33.897112@1] x17: 0000007f9c435f38 x16: 000000000196c078
[   33.897117@1] x15: 0000000000000000 x14: 0000000000000001
[   33.897122@1] x13: ff00000000000000 x12: 0000000000000000
[   33.897127@1] x11: 0000000000000038 x10: 000000000000000a
[   33.897131@1] x9 : 0000000001bf1fa0 x8 : 0000000000000000
[   33.897136@1] x7 : ffffffffffffffff x6 : 00000000000002be
[   33.897141@1] x5 : 00000000000002be x4 : 0000000000000021
[   33.897145@1] x3 : 0000000000000000 x2 : 0000676e69000068
[   33.897150@1] x1 : 0000000001c504c8 x0 : 0000000001c50460
[   33.897154@1]
[   38.042088@1] kodi.bin[741]: unhandled input address range fault (11) at 0x676e69000068, esr 0x83000004
[   38.042099@1] pgd = ffffffc065336000
[   38.042103@1] [676e69000068] *pgd=0000000000000000
[   38.042108@1]
[   38.042114@1] CPU: 1 PID: 741 Comm: kodi.bin Tainted: G           O 3.14.29 #1
[   38.042120@1] task: ffffffc06025a000 ti: ffffffc066678000 task.ti: ffffffc066678000
[   38.042132@1] PC is at 0x676e69000068
[   38.042136@1] LR is at 0x8b43ac
[   38.042140@1] pc : [<0000676e69000068>] lr : [<00000000008b43ac>] pstate: 80000000
[   38.042143@1] sp : 0000007ffd58ad10
[   38.042146@1] x29: 0000000000000000 x28: 0000000000000000
[   38.042151@1] x27: 0000000000000000 x26: 0000000001aee8a0
[   38.042156@1] x25: 0000000000000001 x24: 0000007f9f1f9000
[   38.042161@1] x23: 0000007f9f1fa4c8 x22: 0000007fa0e56c60
[   38.042165@1] x21: 0000000001b147d8 x20: 0000000001c504c8
[   38.042170@1] x19: 0000000001c504c8 x18: 0000000000000000
[   38.042175@1] x17: 0000007fa0e09f38 x16: 000000000196c078
[   38.042180@1] x15: 0000000000000000 x14: 0000000000000001
[   38.042185@1] x13: ff00000000000000 x12: 0000000000000000
[   38.042189@1] x11: 0000000000000038 x10: 000000000000000a
[   38.042194@1] x9 : 0000000001bf1fa0 x8 : 0000000000000000
[   38.042199@1] x7 : ffffffffffffffff x6 : 00000000000002e5
[   38.042204@1] x5 : 00000000000002e5 x4 : 0000000000000021
[   38.042208@1] x3 : 0000000000000000 x2 : 0000676e69000068
[   38.042213@1] x1 : 0000000001c504c8 x0 : 0000000001c50460
[   38.042217@1]
[   42.290334@1] kodi.bin[778]: unhandled input address range fault (11) at 0x676e69000068, esr 0x83000004
[   42.290346@1] pgd = ffffffc05f63d000
[   42.290350@1] [676e69000068] *pgd=0000000000000000
[   42.290354@1]
[   42.290362@1] CPU: 1 PID: 778 Comm: kodi.bin Tainted: G           O 3.14.29 #1
[   42.290366@1] task: ffffffc065f1e000 ti: ffffffc0665d8000 task.ti: ffffffc0665d8000
[   42.290379@1] PC is at 0x676e69000068
[   42.290382@1] LR is at 0x8b43ac
[   42.290386@1] pc : [<0000676e69000068>] lr : [<00000000008b43ac>] pstate: 80000000
[   42.290390@1] sp : 0000007fc8287f70
[   42.290393@1] x29: 0000000000000000 x28: 0000000000000000
[   42.290398@1] x27: 0000000000000000 x26: 0000000001aee8a0
[   42.290402@1] x25: 0000000000000001 x24: 0000007f9e535000
[   42.290407@1] x23: 0000007f9e5364c8 x22: 0000007fa0192c60
[   42.290412@1] x21: 0000000001b147d8 x20: 0000000001c504c8
[   42.290417@1] x19: 0000000001c504c8 x18: 0000000000000000
[   42.290421@1] x17: 0000007fa0145f38 x16: 000000000196c078
[   42.290426@1] x15: 0000000000000000 x14: 0000000000000001
[   42.290431@1] x13: ff00000000000000 x12: 0000000000000000
[   42.290435@1] x11: 0000000000000038 x10: 000000000000000a
[   42.290441@1] x9 : 0000000001bf1fa0 x8 : 0000000000000000
[   42.290445@1] x7 : ffffffffffffffff x6 : 000000000000030a
[   42.290450@1] x5 : 000000000000030a x4 : 0000000000000021
[   42.290455@1] x3 : 0000000000000000 x2 : 0000676e69000068
[   42.290459@1] x1 : 0000000001c504c8 x0 : 0000000001c50460
[   42.290464@1]
[   46.544093@2] kodi.bin[814]: unhandled input address range fault (11) at 0x676e69000068, esr 0x83000004
[   46.544105@2] pgd = ffffffc060367000
[   46.544109@2] [676e69000068] *pgd=0000000000000000
[   46.544114@2]
[   46.544121@2] CPU: 2 PID: 814 Comm: kodi.bin Tainted: G           O 3.14.29 #1
[   46.544126@2] task: ffffffc0602dcc40 ti: ffffffc06654c000 task.ti: ffffffc06654c000
[   46.544138@2] PC is at 0x676e69000068
[   46.544142@2] LR is at 0x8b43ac
[   46.544146@2] pc : [<0000676e69000068>] lr : [<00000000008b43ac>] pstate: 80000000
[   46.544149@2] sp : 0000007fc605de10
[   46.544152@2] x29: 0000000000000000 x28: 0000000000000000
[   46.544157@2] x27: 0000000000000000 x26: 0000000001aee8a0
[   46.544162@2] x25: 0000000000000001 x24: 0000007fa6e28000
[   46.544167@2] x23: 0000007fa6e294c8 x22: 0000007fa8a85c60
[   46.544172@2] x21: 0000000001b147d8 x20: 0000000001c504c8
[   46.544177@2] x19: 0000000001c504c8 x18: 0000000000000000
[   46.544182@2] x17: 0000007fa8a38f38 x16: 000000000196c078
[   46.544186@2] x15: 0000000000000000 x14: 0000000000000001
[   46.544191@2] x13: ff00000000000000 x12: 0000000000000000
[   46.544196@2] x11: 0000000000000038 x10: 000000000000000a
[   46.544200@2] x9 : 0000000001bf1fa0 x8 : 0000000000000000
[   46.544205@2] x7 : ffffffffffffffff x6 : 000000000000032e
[   46.544210@2] x5 : 000000000000032e x4 : 0000000000000021
[   46.544214@2] x3 : 0000000000000000 x2 : 0000676e69000068
[   46.544219@2] x1 : 0000000001c504c8 x0 : 0000000001c50460
[   46.544223@2]
[   50.794128@1] kodi.bin[850]: unhandled input address range fault (11) at 0x676e69000068, esr 0x83000004
[   50.794139@1] pgd = ffffffc06027c000
[   50.794144@1] [676e69000068] *pgd=0000000000000000
[   50.794149@1]
[   50.794155@1] CPU: 1 PID: 850 Comm: kodi.bin Tainted: G           O 3.14.29 #1
[   50.794161@1] task: ffffffc0552dec40 ti: ffffffc0664b4000 task.ti: ffffffc0664b4000
[   50.794174@1] PC is at 0x676e69000068
[   50.794178@1] LR is at 0x8b43ac
[   50.794183@1] pc : [<0000676e69000068>] lr : [<00000000008b43ac>] pstate: 80000000
[   50.794186@1] sp : 0000007fff66aec0
[   50.794189@1] x29: 0000000000000000 x28: 0000000000000000
[   50.794194@1] x27: 0000000000000000 x26: 0000000001aee8a0
[   50.794199@1] x25: 0000000000000001 x24: 0000007f82be9000
[   50.794203@1] x23: 0000007f82bea4c8 x22: 0000007f84846c60
[   50.794208@1] x21: 0000000001b147d8 x20: 0000000001c504c8
[   50.794213@1] x19: 0000000001c504c8 x18: 0000000000000000
[   50.794218@1] x17: 0000007f847f9f38 x16: 000000000196c078
[   50.794223@1] x15: 0000000000000000 x14: 0000000000000001
[   50.794227@1] x13: ff00000000000000 x12: 0000000000000000
[   50.794232@1] x11: 0000000000000038 x10: 000000000000000a
[   50.794237@1] x9 : 0000000001bf1fa0 x8 : 0000000000000000
[   50.794242@1] x7 : ffffffffffffffff x6 : 0000000000000352
[   50.794246@1] x5 : 0000000000000352 x4 : 0000000000000021
[   50.794251@1] x3 : 0000000000000000 x2 : 0000676e69000068
[   50.794256@1] x1 : 0000000001c504c8 x0 : 0000000001c50460
[   50.794260@1]
[   55.044968@2] kodi.bin[887]: unhandled input address range fault (11) at 0x676e69000068, esr 0x83000004
[   55.044979@2] pgd = ffffffc055291000
[   55.044984@2] [676e69000068] *pgd=0000000000000000
[   55.044988@2]
[   55.044995@2] CPU: 2 PID: 887 Comm: kodi.bin Tainted: G           O 3.14.29 #1
[   55.045000@2] task: ffffffc0552acc40 ti: ffffffc06604c000 task.ti: ffffffc06604c000
[   55.045012@2] PC is at 0x676e69000068
[   55.045016@2] LR is at 0x8b43ac
[   55.045020@2] pc : [<0000676e69000068>] lr : [<00000000008b43ac>] pstate: 80000000
[   55.045023@2] sp : 0000007fe1245c00
[   55.045027@2] x29: 0000000000000000 x28: 0000000000000000
[   55.045031@2] x27: 0000000000000000 x26: 0000000001aee8a0
[   55.045036@2] x25: 0000000000000001 x24: 0000007f9f238000
[   55.045041@2] x23: 0000007f9f2394c8 x22: 0000007fa0e95c60
[   55.045046@2] x21: 0000000001b147d8 x20: 0000000001c504c8
[   55.045050@2] x19: 0000000001c504c8 x18: 0000000000000000
[   55.045055@2] x17: 0000007fa0e48f38 x16: 000000000196c078
[   55.045060@2] x15: 0000000000000000 x14: 0000000000000001
[   55.045065@2] x13: ff00000000000000 x12: 0000000000000000
[   55.045069@2] x11: 0000000000000038 x10: 000000000000000a
[   55.045074@2] x9 : 0000000001bf1fa0 x8 : 0000000000000000
[   55.045079@2] x7 : ffffffffffffffff x6 : 0000000000000377
[   55.045084@2] x5 : 0000000000000377 x4 : 0000000000000021
[   55.045089@2] x3 : 0000000000000000 x2 : 0000676e69000068
[   55.045094@2] x1 : 0000000001c504c8 x0 : 0000000001c50460
[   55.045098@2]