API tools faq
paste
Guest User

smartsdamaxtorbaracuda

a guest
Aug 22nd, 2017
219
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.11 KB | None | 0 0
raw download clone embed print report
  1. smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.10.0-28-generic] (local build)
  2. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Seagate Maxtor DiamondMax 21
  6. Device Model: MAXTOR STM3160215AS
  7. Serial Number: 5RA46L72
  8. Firmware Version: 4.AAB
  9. User Capacity: 160 041 885 696 bytes [160 GB]
  10. Sector Size: 512 bytes logical/physical
  11. Device is: In smartctl database [for details use: -P show]
  12. ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
  13. Local Time is: Tue Aug 22 22:18:55 2017 UTC
  14. SMART support is: Available - device has SMART capability.
  15. SMART support is: Enabled
  16.  
  17. === START OF READ SMART DATA SECTION ===
  18. SMART overall-health self-assessment test result: PASSED
  19. See vendor-specific Attribute list for marginal Attributes.
  20.  
  21. General SMART Values:
  22. Offline data collection status: (0x82) Offline data collection activity
  23. was completed without error.
  24. Auto Offline Data Collection: Enabled.
  25. Self-test execution status: ( 0) The previous self-test routine completed
  26. without error or no self-test has ever
  27. been run.
  28. Total time to complete Offline
  29. data collection: ( 430) seconds.
  30. Offline data collection
  31. capabilities: (0x5b) SMART execute Offline immediate.
  32. Auto Offline data collection on/off support.
  33. Suspend Offline collection upon new
  34. command.
  35. Offline surface scan supported.
  36. Self-test supported.
  37. No Conveyance Self-test supported.
  38. Selective Self-test supported.
  39. SMART capabilities: (0x0003) Saves SMART data before entering
  40. power-saving mode.
  41. Supports SMART auto save timer.
  42. Error logging capability: (0x01) Error logging supported.
  43. General Purpose Logging supported.
  44. Short self-test routine
  45. recommended polling time: ( 1) minutes.
  46. Extended self-test routine
  47. recommended polling time: ( 54) minutes.
  48.  
  49. SMART Attributes Data Structure revision number: 10
  50. Vendor Specific SMART Attributes with Thresholds:
  51. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  52. 1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0
  53. 3 Spin_Up_Time 0x0003 100 097 000 Pre-fail Always - 0
  54. 4 Start_Stop_Count 0x0032 089 089 020 Old_age Always - 12270
  55. 5 Reallocated_Sector_Ct 0x0033 097 097 036 Pre-fail Always - 131
  56. 7 Seek_Error_Rate 0x000f 088 060 030 Pre-fail Always - 779946242
  57. 9 Power_On_Hours 0x0032 078 078 000 Old_age Always - 19445
  58. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  59. 12 Power_Cycle_Count 0x0032 094 094 020 Old_age Always - 6937
  60. 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 355
  61. 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
  62. 190 Airflow_Temperature_Cel 0x0022 063 043 045 Old_age Always In_the_past 37 (0 6 37 33 0)
  63. 194 Temperature_Celsius 0x0022 037 057 000 Old_age Always - 37 (0 18 0 0 0)
  64. 195 Hardware_ECC_Recovered 0x001a 071 058 000 Old_age Always - 91388375
  65. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  66. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  67. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  68. 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
  69. 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
  70.  
  71. SMART Error Log Version: 1
  72. ATA Error Count: 357 (device log contains only the most recent five errors)
  73. CR = Command Register [HEX]
  74. FR = Features Register [HEX]
  75. SC = Sector Count Register [HEX]
  76. SN = Sector Number Register [HEX]
  77. CL = Cylinder Low Register [HEX]
  78. CH = Cylinder High Register [HEX]
  79. DH = Device/Head Register [HEX]
  80. DC = Device Command Register [HEX]
  81. ER = Error register [HEX]
  82. ST = Status register [HEX]
  83. Powered_Up_Time is measured from power on, and printed as
  84. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  85. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  86.  
  87. Error 357 occurred at disk power-on lifetime: 9330 hours (388 days + 18 hours)
  88. When the command that caused the error occurred, the device was active or idle.
  89.  
  90. After command completion occurred, registers were:
  91. ER ST SC SN CL CH DH
  92. -- -- -- -- -- -- --
  93. 40 51 00 bf 31 03 e0 Error: UNC at LBA = 0x000331bf = 209343
  94.  
  95. Commands leading to the command that caused the error were:
  96. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  97. -- -- -- -- -- -- -- -- ---------------- --------------------
  98. 25 00 08 b8 31 03 e0 00 02:36:37.921 READ DMA EXT
  99. 25 00 08 58 db 48 e0 00 02:36:37.910 READ DMA EXT
  100. 35 00 20 10 5e 60 e0 00 02:36:37.910 WRITE DMA EXT
  101. 25 00 20 e0 c2 0b e0 00 02:36:37.909 READ DMA EXT
  102. 25 00 08 b0 31 03 e0 00 02:36:37.908 READ DMA EXT
  103.  
  104. Error 356 occurred at disk power-on lifetime: 9330 hours (388 days + 18 hours)
  105. When the command that caused the error occurred, the device was active or idle.
  106.  
  107. After command completion occurred, registers were:
  108. ER ST SC SN CL CH DH
  109. -- -- -- -- -- -- --
  110. 40 51 00 bf 31 03 e0 Error: UNC at LBA = 0x000331bf = 209343
  111.  
  112. Commands leading to the command that caused the error were:
  113. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  114. -- -- -- -- -- -- -- -- ---------------- --------------------
  115. 25 00 20 a0 31 03 e0 00 02:36:34.206 READ DMA EXT
  116. 35 00 00 10 5b 0a e0 00 02:36:34.198 WRITE DMA EXT
  117. 35 00 00 10 5a 0a e0 00 02:36:34.197 WRITE DMA EXT
  118. 35 00 00 10 59 0a e0 00 02:36:34.195 WRITE DMA EXT
  119. 35 00 00 10 58 0a e0 00 02:36:34.193 WRITE DMA EXT
  120.  
  121. Error 355 occurred at disk power-on lifetime: 9281 hours (386 days + 17 hours)
  122. When the command that caused the error occurred, the device was active or idle.
  123.  
  124. After command completion occurred, registers were:
  125. ER ST SC SN CL CH DH
  126. -- -- -- -- -- -- --
  127. 40 51 00 bf 31 03 e0 Error: UNC at LBA = 0x000331bf = 209343
  128.  
  129. Commands leading to the command that caused the error were:
  130. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  131. -- -- -- -- -- -- -- -- ---------------- --------------------
  132. 25 00 08 b8 31 03 e0 00 04:33:58.743 READ DMA EXT
  133. 25 00 08 b0 31 03 e0 00 04:33:58.743 READ DMA EXT
  134. 35 00 08 00 ec 37 e0 00 04:33:58.734 WRITE DMA EXT
  135. 25 00 08 a8 31 03 e0 00 04:33:58.858 READ DMA EXT
  136. ea 00 00 00 00 00 a0 00 04:33:58.858 FLUSH CACHE EXT
  137.  
  138. Error 354 occurred at disk power-on lifetime: 9281 hours (386 days + 17 hours)
  139. When the command that caused the error occurred, the device was active or idle.
  140.  
  141. After command completion occurred, registers were:
  142. ER ST SC SN CL CH DH
  143. -- -- -- -- -- -- --
  144. 40 51 00 bf 31 03 e0 Error: UNC at LBA = 0x000331bf = 209343
  145.  
  146. Commands leading to the command that caused the error were:
  147. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  148. -- -- -- -- -- -- -- -- ---------------- --------------------
  149. 25 00 20 a0 31 03 e0 00 04:33:55.216 READ DMA EXT
  150. 25 00 20 20 2d 03 e0 00 04:33:55.208 READ DMA EXT
  151. 35 00 04 d0 6d 76 e0 00 04:33:55.202 WRITE DMA EXT
  152. 25 00 08 20 4c 04 e0 00 04:33:55.179 READ DMA EXT
  153. 25 00 2f 88 b6 05 e0 00 04:33:55.153 READ DMA EXT
  154.  
  155. Error 353 occurred at disk power-on lifetime: 9235 hours (384 days + 19 hours)
  156. When the command that caused the error occurred, the device was active or idle.
  157.  
  158. After command completion occurred, registers were:
  159. ER ST SC SN CL CH DH
  160. -- -- -- -- -- -- --
  161. 40 51 00 bf 31 03 e0 Error: UNC at LBA = 0x000331bf = 209343
  162.  
  163. Commands leading to the command that caused the error were:
  164. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  165. -- -- -- -- -- -- -- -- ---------------- --------------------
  166. 25 00 40 a0 31 03 e0 00 00:05:38.944 READ DMA EXT
  167. 25 00 10 78 31 03 e0 00 00:05:38.939 READ DMA EXT
  168. 25 00 68 f8 30 03 e0 00 00:05:38.939 READ DMA EXT
  169. 25 00 08 90 30 03 e0 00 00:05:38.938 READ DMA EXT
  170. 25 00 10 20 30 03 e0 00 00:05:38.965 READ DMA EXT
  171.  
  172. SMART Self-test log structure revision number 1
  173. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  174. # 1 Short offline Completed without error 00% 19364 -
  175.  
  176. SMART Selective self-test log data structure revision number 1
  177. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  178. 1 0 0 Not_testing
  179. 2 0 0 Not_testing
  180. 3 0 0 Not_testing
  181. 4 0 0 Not_testing
  182. 5 0 0 Not_testing
  183. Selective self-test flags (0x0):
  184. After scanning selected spans, do NOT read-scan remainder of disk.
  185. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!