API tools faq
paste
Guest User

RIotBoard Android Boot Log (Hanging)

a guest
May 21st, 2014
213
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 16.09 KB | None | 0 0
raw download clone embed print report
  1.  
  2. U-Boot 2009.08-00697-g0b1426c (May 12 2014 - 09:37:36)
  3.  
  4. CPU: Freescale i.MX6 family TO1.1 at 792 MHz
  5. Thermal sensor with ratio = 189
  6. Temperature: 40 C, calibration data 0x5af5285f
  7. mx6q pll1: 792MHz
  8. mx6q pll2: 528MHz
  9. mx6q pll3: 480MHz
  10. mx6q pll8: 50MHz
  11. ipg clock : 66000000Hz
  12. ipg per clock : 66000000Hz
  13. uart clock : 80000000Hz
  14. cspi clock : 60000000Hz
  15. ahb clock : 132000000Hz
  16. axi clock : 198000000Hz
  17. emi_slow clock: 99000000Hz
  18. ddr clock : 396000000Hz
  19. usdhc1 clock : 198000000Hz
  20. usdhc2 clock : 198000000Hz
  21. usdhc3 clock : 198000000Hz
  22. usdhc4 clock : 198000000Hz
  23. nfc clock : 24000000Hz
  24. Board: i.MX6DL/Solo-RIoTboard: 0x61011 [POR ]
  25. Boot Device: MMC
  26. I2C: ready
  27. DRAM: 1 GB
  28. MMC: FSL_USDHC: 0,FSL_USDHC: 1,FSL_USDHC: 2,FSL_USDHC: 3
  29. *** Warning - bad CRC or MMC, using default environment
  30.  
  31. In: serial
  32. Out: serial
  33. Err: serial
  34. Net: got MAC address from IIM: 00:00:00:00:00:00
  35. ----enet_board_init: phy reset
  36. FEC0 [PRIME]
  37. Hit any key to stop autoboot: 0
  38. kernel @ 10808000 (4747312)
  39. ramdisk @ 11800000 (279653)
  40. kernel cmdline:
  41. use uboot command line:
  42. console=ttymxc1,115200 init=/init nosmp video=mxcfb0:dev=hdmi,1280x720M@60,bpp=32 video=mxcfb1:off fbmem=10M vmalloc=400M androidboot.console=ttymxc1 androidboot.hardware=freescale
  43.  
  44. Starting kernel ...
  45.  
  46. Initializing cgroup subsys cpu
  47. Linux version 3.0.35-06434-g8d93477 (riot@ubuntu) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #4 SMP PREEMPT Mon May 12 09:37:18 CDT 2014
  48. CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
  49. CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  50. Machine: Freescale i.MX 6Solo RIoTboard
  51. Ignoring unrecognised tag 0x54410008
  52. Memory policy: ECC disabled, Data cache writealloc
  53. CPU identified as i.MX6DL/SOLO, silicon rev 1.1
  54. PERCPU: Embedded 7 pages/cpu @c130f000 s6592 r8192 d13888 u32768
  55. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 208128
  56. Kernel command line: console=ttymxc1,115200 init=/init nosmp video=mxcfb0:dev=hdmi,1280x720M@60,bpp=32 video=mxcfb1:off fbmem=10M vmalloc=400M androidboot.console=ttymxc1 androidboot.hardware=freescale
  57. PID hash table entries: 2048 (order: 1, 8192 bytes)
  58. Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  59. Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  60. Memory: 767MB 54MB = 821MB total
  61. Memory: 820484k/820484k available, 228092k reserved, 431104K highmem
  62. Virtual kernel memory layout:
  63. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  64. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  65. DMA : 0xfbe00000 - 0xffe00000 ( 64 MB)
  66. vmalloc : 0xd9800000 - 0xf2000000 ( 392 MB)
  67. lowmem : 0xc0000000 - 0xd9000000 ( 400 MB)
  68. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  69. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  70. .init : 0xc0008000 - 0xc0047000 ( 252 kB)
  71. .text : 0xc0047000 - 0xc08d90fc (8777 kB)
  72. .data : 0xc08da000 - 0xc097d708 ( 654 kB)
  73. .bss : 0xc097d72c - 0xc0b054a8 (1568 kB)
  74. Preemptible hierarchical RCU implementation.
  75. NR_IRQS:624
  76. MXC GPIO hardware
  77. sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655ms
  78. Set periph_clk's parent to pll2_pfd_400M!
  79. arm_max_freq=1GHz
  80. MXC_Early serial console at MMIO 0x21e8000 (options '115200')
  81. bootconsole [ttymxc1] enabled
  82. Calibrating delay loop... 1581.05 BogoMIPS (lpj=7905280)
  83. pid_max: default: 32768 minimum: 301
  84. Mount-cache hash table entries: 512
  85. Initializing cgroup subsys debug
  86. Initializing cgroup subsys cpuacct
  87. Initializing cgroup subsys freezer
  88. CPU: Testing write buffer coherency: ok
  89. hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  90. Brought up 1 CPUs
  91. SMP: Total of 1 processors activated (1581.05 BogoMIPS).
  92. print_constraints: dummy:
  93. NET: Registered protocol family 16
  94. print_constraints: vddpu: 725 <--> 1300 mV at 700 mV fast normal
  95. print_constraints: vddcore: 725 <--> 1300 mV at 1150 mV fast normal
  96. print_constraints: vddsoc: 725 <--> 1300 mV at 1200 mV fast normal
  97. print_constraints: vdd2p5: 2000 <--> 2775 mV at 2400 mV fast normal
  98. print_constraints: vdd1p1: 800 <--> 1400 mV at 1100 mV fast normal
  99. print_constraints: vdd3p0: 2625 <--> 3400 mV at 3000 mV fast normal
  100. ram_console: got buffer at 3ff00000, size 100000
  101. ram_console: found existing buffer, size 16945, start 16945
  102. console [ram-1] enabled
  103. ----ldb_init
  104. hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  105. hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
  106. hw-breakpoint: maximum watchpoint size is 4 bytes.
  107. L310 cache controller enabled
  108. l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x32050000, Cache size: 524288 B
  109. bio: create slab <bio-0> at 0
  110. mxs-dma mxs-dma-apbh: initialized
  111. print_constraints: VDDA: 2500 mV
  112. print_constraints: VDDIO: 3300 mV
  113. machine_constraints_voltage: VDDD: unsupportable voltage constraints
  114. reg-fixed-voltage reg-fixed-voltage.2: Failed to register regulator: -22
  115. reg-fixed-voltage: probe of reg-fixed-voltage.2 failed with error -22
  116. print_constraints: vmmc: 3300 mV
  117. vgaarb: loaded
  118. SCSI subsystem initialized
  119. spi_imx imx6q-ecspi.0: probed
  120. usbcore: registered new interface driver usbfs
  121. usbcore: registered new interface driver hub
  122. usbcore: registered new device driver usb
  123. Freescale USB OTG Driver loaded, $Revision: 1.55 $
  124. mc_pfuze 1-0008: recv failed!:-5,0
  125. mc_pfuze: probe of 1-0008 failed with error -1
  126. imx-ipuv3 imx-ipuv3.0: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
  127. mxc_mipi_csi2 mxc_mipi_csi2: i.MX MIPI CSI2 driver probed
  128. mxc_mipi_csi2 mxc_mipi_csi2: i.MX MIPI CSI2 dphy version is 0x3130302a
  129. MIPI CSI2 driver module loaded
  130. Advanced Linux Sound Architecture Driver Version 1.0.24.
  131. Bluetooth: Core ver 2.16
  132. NET: Registered protocol family 31
  133. Bluetooth: HCI device and connection manager initialized
  134. Bluetooth: HCI socket layer initialized
  135. Bluetooth: L2CAP socket layer initialized
  136. Bluetooth: SCO socket layer initialized
  137. i2c-core: driver [max17135] using legacy suspend method
  138. i2c-core: driver [max17135] using legacy resume method
  139. Switching to clocksource mxc_timer1
  140. NET: Registered protocol family 2
  141. IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
  142. TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  143. TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  144. TCP: Hash tables configured (established 65536 bind 65536)
  145. TCP reno registered
  146. UDP hash table entries: 256 (order: 1, 8192 bytes)
  147. UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  148. NET: Registered protocol family 1
  149. RPC: Registered named UNIX socket transport module.
  150. RPC: Registered udp transport module.
  151. RPC: Registered tcp transport module.
  152. RPC: Registered tcp NFSv4.1 backchannel transport module.
  153. PCI: CLS 0 bytes, default 32
  154. Unpacking initramfs...
  155. Freeing initrd memory: 272K
  156. PMU: registered new PMU device of type 0
  157. Static Power Management for Freescale i.MX6
  158. wait mode is enabled for i.MX6
  159. cpaddr = d9820000 suspend_iram_base=d98b8000
  160. PM driver module loaded
  161. IMX usb wakeup probe
  162. the wakeup pdata is 0xd63fdaa0
  163. add wake up source irq 75
  164. IMX usb wakeup probe
  165. the wakeup pdata is 0xd63fd860
  166. cpu regulator mode:ldo_enable
  167. i.MXC CPU frequency driver
  168. highmem bounce pool size: 64 pages
  169. ashmem: initialized
  170. NTFS driver 2.1.30 [Flags: R/O].
  171. JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
  172. fuse init (API version 7.16)
  173. msgmni has been set to 761
  174. NET: Registered protocol family 38
  175. cryptodev: driver loaded.
  176. io scheduler noop registered
  177. io scheduler deadline registered
  178. io scheduler cfq registered (default)
  179. mxc_mipi_dsi mxc_mipi_dsi: i.MX MIPI DSI driver probed
  180. MIPI DSI driver module loaded
  181. mxc_sdc_fb mxc_sdc_fb.0: register mxc display driver hdmi
  182. mxc_hdmi mxc_hdmi: Detected HDMI controller 0x13:0x1a:0xa0:0xc1
  183. fbcvt: 1280x720@60: CVT Name - .921M9
  184. imx-ipuv3 imx-ipuv3.0: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
  185. mxc_sdc_fb mxc_sdc_fb.1: Can't get fb option for mxcfb1!
  186. imx-sdma imx-sdma: loaded firmware 1.1
  187. imx-sdma imx-sdma: initialized
  188. fbcvt: 1280x720@60: CVT Name - .921M9
  189. Serial: IMX driver
  190. imx-uart.2: ttymxc2 at MMIO 0x21ec000 (irq = 60) is a IMX
  191. imx-uart.1: ttymxc1 at MMIO 0x21e8000 (irq = 59) is a IMX
  192. console [ttymxc1] enabled, bootconsole disabled
  193. console [ttymxc1] enabled, bootconsole disabled
  194. imx-uart.0: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX
  195. loop: module loaded
  196. GPMI NAND driver registered. (IMX)
  197. vcan: Virtual CAN interface driver
  198. CAN device driver interface
  199. flexcan netdevice driver
  200. FEC Ethernet Driver
  201. fec_enet_mii_bus: probed
  202. PPP generic driver version 2.4.2
  203. PPP Deflate Compression module registered
  204. PPP BSD Compression module registered
  205. PPP MPPE Compression module registered
  206. NET: Registered protocol family 24
  207. PPTP driver version 0.8.5
  208. tun: Universal TUN/TAP device driver, 1.6
  209. tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  210. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  211. fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
  212. fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
  213. fsl-ehci fsl-ehci.0: irq 75, io base 0x02184000
  214. fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
  215. hub 1-0:1.0: USB hub found
  216. hub 1-0:1.0: 1 port detected
  217. add wake up source irq 72
  218. fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
  219. fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
  220. fsl-ehci fsl-ehci.1: irq 72, io base 0x02184200
  221. fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
  222. hub 2-0:1.0: USB hub found
  223. hub 2-0:1.0: 1 port detected
  224. usbcore: registered new interface driver cdc_acm
  225. cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  226. Initializing USB Mass Storage driver...
  227. usbcore: registered new interface driver usb-storage
  228. USB Mass Storage support registered.
  229. usbcore: registered new interface driver usbserial
  230. usbserial: USB Serial Driver core
  231. USB Serial support registered for GSM modem (1-port)
  232. usbcore: registered new interface driver option
  233. option: v0.7.2:USB Driver for GSM modems
  234. USB Serial support registered for Qualcomm USB modem
  235. usbcore: registered new interface driver qcserial
  236. ARC USBOTG Device Controller driver (1 August 2005)
  237. android_usb gadget: Mass Storage Function, version: 2009/09/11
  238. android_usb gadget: Number of LUNs=1
  239. lun0: LUN: removable file: (no medium)
  240. Gadget Android: controller 'fsl-usb2-udc' not recognized
  241. android_usb gadget: android_usb ready
  242. Suspend udc for OTG auto detect
  243. USB Host suspend begins
  244. will suspend roothub and its children
  245. ehci_fsl_bus_suspend begins, DR
  246. ehci_fsl_bus_suspend ends, DR
  247. host suspend ends
  248. USB Gadget resume begins
  249. fsl_udc_resume, Wait for wakeup thread finishes
  250. dr_controller_run: udc enter low power mode
  251. USB Gadget resume ends
  252. fsl-usb2-udc: bind to driver android_usb
  253. mousedev: PS/2 mouse device common for all mice
  254. ----ads7846_probe
  255. ads7846 spi0.0: touchscreen, irq 344
  256. input: ads7846 as /devices/platform/imx6q-ecspi.0/spi_master/spi0/spi0.0/input/input0
  257. generic touchscreen driver, <@>.
  258. usb 2-1: new high speed USB device number 2 using fsl-ehci
  259. hub 2-1:1.0: USB hub found
  260. hub 2-1:1.0: 4 ports detected
  261. USB Gadget resume begins
  262. fsl_udc_resume, Wait for wakeup thread finishes
  263. >>>>> ct365_get_vendor() called <<<<<
  264. Chip ID: 0x0
  265. Chip data allocation failed: 0x0
  266. i2c-core: driver [generic_ts] using legacy suspend method
  267. i2c-core: driver [generic_ts] using legacy resume method
  268. i2c-core: driver [isl29023] using legacy suspend method
  269. i2c-core: driver [isl29023] using legacy resume method
  270. using rtc device, snvs_rtc, for alarms
  271. snvs_rtc snvs_rtc.0: rtc core: registered snvs_rtc as rtc0
  272. i2c /dev entries driver
  273. ch7033_probe
  274. ch7033 id:fffffffb
  275. i2c-core: driver [ch7033] using legacy suspend method
  276. i2c-core: driver [ch7033] using legacy resume method
  277. Linux video capture interface: v2.00
  278. mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video16
  279. mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video17
  280. usbcore: registered new interface driver uvcvideo
  281. USB Video Class driver (v1.1.0)
  282. i2c-core: driver [mag3110] using legacy suspend method
  283. i2c-core: driver [mag3110] using legacy resume method
  284. imx2-wdt imx2-wdt.0: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=1)
  285. device-mapper: uevent: version 1.0.3
  286. device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
  287. Bluetooth: Virtual HCI driver ver 1.3
  288. Bluetooth: HCI UART driver ver 2.2
  289. Bluetooth: HCIATH3K protocol initialized
  290. Bluetooth: Generic Bluetooth USB driver ver 0.6
  291. usbcore: registered new interface driver btusb
  292. sdhci: Secure Digital Host Controller Interface driver
  293. sdhci: Copyright(c) Pierre Ossman
  294. mmc0: SDHCI controller on platform [sdhci-esdhc-imx.3] using ADMA
  295. mmc1: SDHCI controller on platform [sdhci-esdhc-imx.1] using ADMA
  296. mmc2: SDHCI controller on platform [sdhci-esdhc-imx.2] using ADMA
  297. mxc_vdoa mxc_vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
  298. VPU initialized
  299. mxc_asrc registered
  300. Galcore version 4.6.9.6622
  301. revserved_memory_account:viv_gpu registerd
  302. Thermal calibration data is 0x5af5285f
  303. Thermal sensor with ratio = 189
  304. Anatop Thermal registered as thermal_zone0
  305. anatop_thermal_probe: default cooling device is cpufreq!
  306. Registered led device: sys_led
  307. Registered led device: user_led
  308. usbcore: registered new interface driver usbhid
  309. usbhid: USB HID core driver
  310. mmc0: new high speed DDR MMC card at address 0001
  311. logger: created 256K log 'log_main'
  312. mmcblk0: mmc0:0001 MMC04G 3.57 GiB
  313. logger: created 256K log 'log_events'
  314. mmcblk0boot0: mmc0:0001 MMC04G partition 1 2.00 MiB
  315. logger: created 256K log 'log_radio'
  316. mmcblk0boot1: mmc0:0001 MMC04G partition 2 2.00 MiB
  317. logger: created 256K log 'log_system'
  318. usbcore: registered new interface driver snd-usb-audio
  319. mxc_hdmi_soc mxc_hdmi_soc.0: MXC HDMI Audio
  320. Cirrus Logic CS42888 ALSA SoC Codec Driver
  321. i2c-core: driver [cs42888] using legacy suspend method
  322. i2c-core: driver [cs42888] using legacy resume method
  323. mmcblk0: p1 p2 p3 < p5 p6 p7 p8 > p4
  324. mmcblk0: p4 size 5324800 extends beyond EOD, truncated
  325. mmcblk0boot1: unknown partition table
  326. mmcblk0boot0: unknown partition table
  327. ----sab_sgtl5000_init
  328. ----enable clko_clk.
  329. sgtl5000 0-000a: Failed to get supply 'VDDD': -19
  330. print_constraints: 0-000a: 850 <--> 1600 mV at 1200 mV normal
  331. sgtl5000 0-000a: sgtl5000 revision 17
  332. asoc: sgtl5000 <-> imx-ssi.1 mapping ok
  333. imx_3stack asoc driver
  334. asoc: mxc-hdmi-soc <-> imx-hdmi-soc-dai.0 mapping ok
  335. ALSA device list:
  336. #0: sgtl5000-audio
  337. #1: imx-hdmi-soc
  338. oprofile: using arm/armv7-ca9
  339. GACT probability NOT on
  340. Mirror/redirect action on
  341. u32 classifier
  342. Actions configured
  343. Netfilter messages via NETLINK v0.30.
  344. nf_conntrack version 0.5.0 (12824 buckets, 51296 max)
  345. ctnetlink v0.93: registering with nfnetlink.
  346. NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  347. NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  348. xt_time: kernel timezone is -0000
  349. IPv4 over IPv4 tunneling driver
  350. GRE over IPv4 demultiplexor driver
  351. ip_tables: (C) 2000-2006 Netfilter Core Team
  352. arp_tables: (C) 2002 David S. Miller
  353. TCP cubic registered
  354. NET: Registered protocol family 10
  355. Mobile IPv6
  356. ip6_tables: (C) 2000-2006 Netfilter Core Team
  357. IPv6 over IPv4 tunneling driver
  358. NET: Registered protocol family 17
  359. NET: Registered protocol family 15
  360. can: controller area network core (rev 20090105 abi 8)
  361. NET: Registered protocol family 29
  362. can: raw protocol (rev 20090105)
  363. can: broadcast manager protocol (rev 20090105 t)
  364. Bluetooth: RFCOMM TTY layer initialized
  365. Bluetooth: RFCOMM socket layer initialized
  366. Bluetooth: RFCOMM ver 1.11
  367. Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  368. Bluetooth: BNEP filters: protocol multicast
  369. Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  370. L2TP core driver, V2.0
  371. PPPoL2TP kernel driver, V2.0
  372. L2TP IP encapsulation support (L2TPv3)
  373. L2TP netlink interface
  374. L2TP ethernet pseudowire support (L2TPv3)
  375. lib80211: common routines for IEEE802.11 drivers
  376. lib80211_crypt: registered algorithm 'NULL'
  377. lib80211_crypt: registered algorithm 'WEP'
  378. lib80211_crypt: registered algorithm 'CCMP'
  379. lib80211_crypt: registered algorithm 'TKIP'
  380. VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  381. Bus freq driver module loaded
  382. Bus freq driver Enabled
  383. mxc_dvfs_core_probe
  384. DVFS driver module loaded
  385. snvs_rtc snvs_rtc.0: setting system clock to 1970-01-01 00:05:12 UTC (312)
  386. Freeing init memory: 252K
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!