API tools faq
paste
Advertisement
nnexe

dmesg

nnexe
May 6th, 2011
221
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 70.94 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Initializing cgroup subsys cpuset
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 2.6.38-gentoo-r4 (root@nik) (gcc version 4.5.2 (Gentoo 4.5.2 p1.1, pie-0.4.5) ) #1 SMP Fri May 6 08:55:39 NOVST 2011
  4. [ 0.000000] Command line: root=/dev/sda5 vga=0x314 splash=silent,theme:livecd-2007.0
  5. [ 0.000000] BIOS-provided physical RAM map:
  6. [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
  7. [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
  8. [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
  9. [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff80000 (usable)
  10. [ 0.000000] BIOS-e820: 000000007ff80000 - 000000007ff8e000 (ACPI data)
  11. [ 0.000000] BIOS-e820: 000000007ff8e000 - 000000007ffe0000 (ACPI NVS)
  12. [ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
  13. [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
  14. [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
  15. [ 0.000000] NX (Execute Disable) protection: active
  16. [ 0.000000] DMI 2.4 present.
  17. [ 0.000000] DMI: System manufacturer P5K/P5K, BIOS 1201 10/14/2008
  18. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
  19. [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
  20. [ 0.000000] No AGP bridge found
  21. [ 0.000000] last_pfn = 0x7ff80 max_arch_pfn = 0x400000000
  22. [ 0.000000] MTRR default type: uncachable
  23. [ 0.000000] MTRR fixed ranges enabled:
  24. [ 0.000000] 00000-9FFFF write-back
  25. [ 0.000000] A0000-BFFFF uncachable
  26. [ 0.000000] C0000-DFFFF write-protect
  27. [ 0.000000] E0000-EFFFF write-through
  28. [ 0.000000] F0000-FFFFF write-protect
  29. [ 0.000000] MTRR variable ranges enabled:
  30. [ 0.000000] 0 base 000000000 mask F80000000 write-back
  31. [ 0.000000] 1 disabled
  32. [ 0.000000] 2 disabled
  33. [ 0.000000] 3 disabled
  34. [ 0.000000] 4 disabled
  35. [ 0.000000] 5 disabled
  36. [ 0.000000] 6 disabled
  37. [ 0.000000] 7 disabled
  38. [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  39. [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
  40. [ 0.000000] initial memory mapped : 0 - 20000000
  41. [ 0.000000] init_memory_mapping: 0000000000000000-000000007ff80000
  42. [ 0.000000] 0000000000 - 007fe00000 page 2M
  43. [ 0.000000] 007fe00000 - 007ff80000 page 4k
  44. [ 0.000000] kernel direct mapping tables up to 7ff80000 @ 1fffc000-20000000
  45. [ 0.000000] RAMDISK: 37f10000 - 37ff0000
  46. [ 0.000000] ACPI: RSDP 00000000000fbcd0 00014 (v00 ACPIAM)
  47. [ 0.000000] ACPI: RSDT 000000007ff80000 0003C (v01 A_M_I_ OEMRSDT 10000814 MSFT 00000097)
  48. [ 0.000000] ACPI: FACP 000000007ff80200 00084 (v02 A_M_I_ OEMFACP 10000814 MSFT 00000097)
  49. [ 0.000000] ACPI: DSDT 000000007ff80440 090AA (v01 A0751 A0751077 00000077 INTL 20060113)
  50. [ 0.000000] ACPI: FACS 000000007ff8e000 00040
  51. [ 0.000000] ACPI: APIC 000000007ff80390 0006C (v01 A_M_I_ OEMAPIC 10000814 MSFT 00000097)
  52. [ 0.000000] ACPI: MCFG 000000007ff80400 0003C (v01 A_M_I_ OEMMCFG 10000814 MSFT 00000097)
  53. [ 0.000000] ACPI: OEMB 000000007ff8e040 00081 (v01 A_M_I_ AMI_OEM 10000814 MSFT 00000097)
  54. [ 0.000000] ACPI: HPET 000000007ff894f0 00038 (v01 A_M_I_ OEMHPET 10000814 MSFT 00000097)
  55. [ 0.000000] ACPI: OSFR 000000007ff89530 000B0 (v01 A_M_I_ OEMOSFR 10000814 MSFT 00000097)
  56. [ 0.000000] ACPI: Local APIC address 0xfee00000
  57. [ 0.000000] No NUMA configuration found
  58. [ 0.000000] Faking a node at 0000000000000000-000000007ff80000
  59. [ 0.000000] Initmem setup node 0 0000000000000000-000000007ff80000
  60. [ 0.000000] NODE_DATA [000000007ff7b000 - 000000007ff7ffff]
  61. [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0
  62. [ 0.000000] Zone PFN ranges:
  63. [ 0.000000] DMA 0x00000010 -> 0x00001000
  64. [ 0.000000] DMA32 0x00001000 -> 0x00100000
  65. [ 0.000000] Normal empty
  66. [ 0.000000] Movable zone start PFN for each node
  67. [ 0.000000] early_node_map[2] active PFN ranges
  68. [ 0.000000] 0: 0x00000010 -> 0x0000009f
  69. [ 0.000000] 0: 0x00000100 -> 0x0007ff80
  70. [ 0.000000] On node 0 totalpages: 524047
  71. [ 0.000000] DMA zone: 56 pages used for memmap
  72. [ 0.000000] DMA zone: 6 pages reserved
  73. [ 0.000000] DMA zone: 3921 pages, LIFO batch:0
  74. [ 0.000000] DMA32 zone: 7111 pages used for memmap
  75. [ 0.000000] DMA32 zone: 512953 pages, LIFO batch:31
  76. [ 0.000000] ACPI: PM-Timer IO Port: 0x808
  77. [ 0.000000] ACPI: Local APIC address 0xfee00000
  78. [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
  79. [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
  80. [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
  81. [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
  82. [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
  83. [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
  84. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  85. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  86. [ 0.000000] ACPI: IRQ0 used by override.
  87. [ 0.000000] ACPI: IRQ2 used by override.
  88. [ 0.000000] ACPI: IRQ9 used by override.
  89. [ 0.000000] Using ACPI (MADT) for SMP configuration information
  90. [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
  91. [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
  92. [ 0.000000] nr_irqs_gsi: 40
  93. [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
  94. [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
  95. [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
  96. [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
  97. [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
  98. [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88007fc00000 s75456 r8192 d22848 u524288
  99. [ 0.000000] pcpu-alloc: s75456 r8192 d22848 u524288 alloc=1*2097152
  100. [ 0.000000] pcpu-alloc: [0] 0 1 2 3
  101. [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516874
  102. [ 0.000000] Policy zone: DMA32
  103. [ 0.000000] Kernel command line: root=/dev/sda5 vga=0x314 splash=silent,theme:livecd-2007.0
  104. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  105. [ 0.000000] Checking aperture...
  106. [ 0.000000] No AGP bridge found
  107. [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
  108. [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
  109. [ 0.000000] Memory: 2053296k/2096640k available (5757k kernel code, 452k absent, 42892k reserved, 5361k data, 628k init)
  110. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  111. [ 0.000000] Hierarchical RCU implementation.
  112. [ 0.000000] RCU-based detection of stalled CPUs is disabled.
  113. [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
  114. [ 0.000000] Console: colour dummy device 80x25
  115. [ 0.000000] console [tty0] enabled
  116. [ 0.000000] hpet clockevent registered
  117. [ 0.000000] Fast TSC calibration using PIT
  118. [ 0.000000] Detected 2504.619 MHz processor.
  119. [ 0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5009.23 BogoMIPS (lpj=2504619)
  120. [ 0.001009] pid_max: default: 32768 minimum: 301
  121. [ 0.001033] Security Framework initialized
  122. [ 0.001037] SELinux: Initializing.
  123. [ 0.001046] SELinux: Starting in permissive mode
  124. [ 0.001233] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  125. [ 0.002752] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  126. [ 0.003096] Mount-cache hash table entries: 256
  127. [ 0.003232] Initializing cgroup subsys ns
  128. [ 0.003238] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
  129. [ 0.003243] Initializing cgroup subsys cpuacct
  130. [ 0.003248] Initializing cgroup subsys freezer
  131. [ 0.003275] CPU: Physical Processor ID: 0
  132. [ 0.003278] CPU: Processor Core ID: 0
  133. [ 0.003281] mce: CPU supports 6 MCE banks
  134. [ 0.003287] CPU0: Thermal monitoring enabled (TM2)
  135. [ 0.003293] using mwait in idle threads.
  136. [ 0.003330] ACPI: Core revision 20110112
  137. [ 0.007053] Setting APIC routing to flat
  138. [ 0.007351] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  139. [ 0.017789] CPU0: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07
  140. [ 0.017998] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
  141. [ 0.017998] ... version: 2
  142. [ 0.017998] ... bit width: 40
  143. [ 0.017998] ... generic registers: 2
  144. [ 0.017998] ... value mask: 000000ffffffffff
  145. [ 0.017998] ... max period: 000000007fffffff
  146. [ 0.017998] ... fixed-purpose events: 3
  147. [ 0.017998] ... event mask: 0000000700000003
  148. [ 0.017998] Booting Node 0, Processors #1 #2 #3 Ok.
  149. [ 0.232980] Brought up 4 CPUs
  150. [ 0.232985] Total of 4 processors activated (23943.54 BogoMIPS).
  151. [ 0.235025] kworker/u:0 used greatest stack depth: 5744 bytes left
  152. [ 0.235056] Time: 9:15:45 Date: 05/06/11
  153. [ 0.235089] NET: Registered protocol family 16
  154. [ 0.236001] ACPI: bus type pci registered
  155. [ 0.236009] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  156. [ 0.236009] PCI: not using MMCONFIG
  157. [ 0.236009] PCI: Using configuration type 1 for base access
  158. [ 0.249019] bio: create slab <bio-0> at 0
  159. [ 0.250854] ACPI: EC: Look up EC in DSDT
  160. [ 0.251880] ACPI: Executed 1 blocks of module-level executable AML code
  161. [ 0.257232] ACPI: SSDT 000000007ff8e0d0 00190 (v01 AMI CPU1PM 00000001 INTL 20060113)
  162. [ 0.257484] ACPI: Dynamic OEM Table Load:
  163. [ 0.257488] ACPI: SSDT (null) 00190 (v01 AMI CPU1PM 00000001 INTL 20060113)
  164. [ 0.257660] ACPI: SSDT 000000007ff8e260 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
  165. [ 0.258024] ACPI: Dynamic OEM Table Load:
  166. [ 0.258029] ACPI: SSDT (null) 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
  167. [ 0.258201] ACPI: SSDT 000000007ff8e3b0 00143 (v01 AMI CPU3PM 00000001 INTL 20060113)
  168. [ 0.258443] ACPI: Dynamic OEM Table Load:
  169. [ 0.258447] ACPI: SSDT (null) 00143 (v01 AMI CPU3PM 00000001 INTL 20060113)
  170. [ 0.258619] ACPI: SSDT 000000007ff8e500 00143 (v01 AMI CPU4PM 00000001 INTL 20060113)
  171. [ 0.258862] ACPI: Dynamic OEM Table Load:
  172. [ 0.258866] ACPI: SSDT (null) 00143 (v01 AMI CPU4PM 00000001 INTL 20060113)
  173. [ 0.259021] ACPI: Interpreter enabled
  174. [ 0.259025] ACPI: (supports S0 S1 S3 S4 S5)
  175. [ 0.259054] ACPI: Using IOAPIC for interrupt routing
  176. [ 0.259081] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  177. [ 0.259564] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
  178. [ 0.283099] ACPI: No dock devices found.
  179. [ 0.283105] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  180. [ 0.283169] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  181. [ 0.283208] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
  182. [ 0.283208] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
  183. [ 0.283208] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
  184. [ 0.283208] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
  185. [ 0.283208] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xffffffff]
  186. [ 0.283208] pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600
  187. [ 0.283208] pci 0000:00:01.0: [8086:29c1] type 1 class 0x000604
  188. [ 0.283208] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
  189. [ 0.283208] pci 0000:00:01.0: PME# disabled
  190. [ 0.283208] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
  191. [ 0.283222] pci 0000:00:1a.0: reg 20: [io 0xc800-0xc81f]
  192. [ 0.283258] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
  193. [ 0.283294] pci 0000:00:1a.1: reg 20: [io 0xc880-0xc89f]
  194. [ 0.283331] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
  195. [ 0.283367] pci 0000:00:1a.2: reg 20: [io 0xcc00-0xcc1f]
  196. [ 0.283411] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
  197. [ 0.283429] pci 0000:00:1a.7: reg 10: [mem 0xf9fffc00-0xf9ffffff]
  198. [ 0.283492] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
  199. [ 0.283495] pci 0000:00:1a.7: PME# disabled
  200. [ 0.283515] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
  201. [ 0.283527] pci 0000:00:1b.0: reg 10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
  202. [ 0.283572] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
  203. [ 0.283576] pci 0000:00:1b.0: PME# disabled
  204. [ 0.283971] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
  205. [ 0.284017] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  206. [ 0.284020] pci 0000:00:1c.0: PME# disabled
  207. [ 0.284045] pci 0000:00:1c.5: [8086:294a] type 1 class 0x000604
  208. [ 0.284100] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
  209. [ 0.284103] pci 0000:00:1c.5: PME# disabled
  210. [ 0.284130] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
  211. [ 0.284166] pci 0000:00:1d.0: reg 20: [io 0xc080-0xc09f]
  212. [ 0.284203] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
  213. [ 0.284239] pci 0000:00:1d.1: reg 20: [io 0xc400-0xc41f]
  214. [ 0.284275] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
  215. [ 0.284311] pci 0000:00:1d.2: reg 20: [io 0xc480-0xc49f]
  216. [ 0.284356] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
  217. [ 0.284374] pci 0000:00:1d.7: reg 10: [mem 0xf9fff800-0xf9fffbff]
  218. [ 0.284436] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
  219. [ 0.284440] pci 0000:00:1d.7: PME# disabled
  220. [ 0.284456] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
  221. [ 0.284503] pci 0000:00:1f.0: [8086:2918] type 0 class 0x000601
  222. [ 0.284573] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
  223. [ 0.284609] pci 0000:00:1f.2: [8086:2921] type 0 class 0x000101
  224. [ 0.284621] pci 0000:00:1f.2: reg 10: [io 0xb000-0xb007]
  225. [ 0.284628] pci 0000:00:1f.2: reg 14: [io 0xac00-0xac03]
  226. [ 0.284635] pci 0000:00:1f.2: reg 18: [io 0xa880-0xa887]
  227. [ 0.284642] pci 0000:00:1f.2: reg 1c: [io 0xa800-0xa803]
  228. [ 0.284649] pci 0000:00:1f.2: reg 20: [io 0xa480-0xa48f]
  229. [ 0.284655] pci 0000:00:1f.2: reg 24: [io 0xa400-0xa40f]
  230. [ 0.284686] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
  231. [ 0.284699] pci 0000:00:1f.3: reg 10: [mem 0xf9fff400-0xf9fff4ff 64bit]
  232. [ 0.284716] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
  233. [ 0.284743] pci 0000:00:1f.5: [8086:2926] type 0 class 0x000101
  234. [ 0.284756] pci 0000:00:1f.5: reg 10: [io 0xc000-0xc007]
  235. [ 0.284763] pci 0000:00:1f.5: reg 14: [io 0xbc00-0xbc03]
  236. [ 0.284769] pci 0000:00:1f.5: reg 18: [io 0xb880-0xb887]
  237. [ 0.284776] pci 0000:00:1f.5: reg 1c: [io 0xb800-0xb803]
  238. [ 0.284783] pci 0000:00:1f.5: reg 20: [io 0xb480-0xb48f]
  239. [ 0.284790] pci 0000:00:1f.5: reg 24: [io 0xb400-0xb40f]
  240. [ 0.284844] pci 0000:01:00.0: [10de:0611] type 0 class 0x000300
  241. [ 0.284853] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
  242. [ 0.284862] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
  243. [ 0.284872] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
  244. [ 0.284878] pci 0000:01:00.0: reg 24: [io 0xdc00-0xdc7f]
  245. [ 0.284885] pci 0000:01:00.0: reg 30: [mem 0xfe9e0000-0xfe9fffff pref]
  246. [ 0.284920] pci 0000:00:01.0: PCI bridge to [bus 01-01]
  247. [ 0.284924] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
  248. [ 0.284927] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe9fffff]
  249. [ 0.284930] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
  250. [ 0.284968] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
  251. [ 0.284973] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
  252. [ 0.284977] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
  253. [ 0.284982] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
  254. [ 0.285030] pci 0000:02:00.0: [1969:1048] type 0 class 0x000200
  255. [ 0.285060] pci 0000:02:00.0: reg 10: [mem 0xfeac0000-0xfeafffff 64bit]
  256. [ 0.285118] pci 0000:02:00.0: reg 30: [mem 0xfeaa0000-0xfeabffff pref]
  257. [ 0.285148] pci 0000:02:00.0: PME# supported from D3hot D3cold
  258. [ 0.285152] pci 0000:02:00.0: PME# disabled
  259. [ 0.285167] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
  260. [ 0.285178] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
  261. [ 0.285183] pci 0000:00:1c.5: bridge window [io 0xf000-0x0000] (disabled)
  262. [ 0.285187] pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff]
  263. [ 0.285192] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
  264. [ 0.285222] pci 0000:04:03.0: [1106:3044] type 0 class 0x000c00
  265. [ 0.285238] pci 0000:04:03.0: reg 10: [mem 0xfebff800-0xfebfffff]
  266. [ 0.285247] pci 0000:04:03.0: reg 14: [io 0xec00-0xec7f]
  267. [ 0.285299] pci 0000:04:03.0: supports D2
  268. [ 0.285301] pci 0000:04:03.0: PME# supported from D2 D3hot D3cold
  269. [ 0.285305] pci 0000:04:03.0: PME# disabled
  270. [ 0.285341] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
  271. [ 0.285346] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
  272. [ 0.285350] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
  273. [ 0.285355] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
  274. [ 0.285357] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
  275. [ 0.285359] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
  276. [ 0.285362] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
  277. [ 0.285364] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
  278. [ 0.285366] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
  279. [ 0.285381] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  280. [ 0.285495] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
  281. [ 0.285527] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
  282. [ 0.285617] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
  283. [ 0.285668] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
  284. [ 0.285697] pci0000:00: Requesting ACPI _OSC control (0x1d)
  285. [ 0.294052] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  286. [ 0.294054] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
  287. [ 0.294100] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
  288. [ 0.294147] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
  289. [ 0.294193] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  290. [ 0.294240] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
  291. [ 0.294286] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
  292. [ 0.294972] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
  293. [ 0.295003] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
  294. [ 0.295003] vgaarb: loaded
  295. [ 0.295058] SCSI subsystem initialized
  296. [ 0.295058] libata version 3.00 loaded.
  297. [ 0.295970] usbcore: registered new interface driver usbfs
  298. [ 0.295992] usbcore: registered new interface driver hub
  299. [ 0.295992] usbcore: registered new device driver usb
  300. [ 0.296001] Advanced Linux Sound Architecture Driver Version 1.0.23.
  301. [ 0.296001] PCI: Using ACPI for IRQ routing
  302. [ 0.296001] PCI: pci_cache_line_size set to 64 bytes
  303. [ 0.296053] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
  304. [ 0.296056] reserve RAM buffer: 000000007ff80000 - 000000007fffffff
  305. [ 0.297009] cfg80211: Calling CRDA to update world regulatory domain
  306. [ 0.297117] NetLabel: Initializing
  307. [ 0.297121] NetLabel: domain hash size = 128
  308. [ 0.297123] NetLabel: protocols = UNLABELED CIPSOv4
  309. [ 0.297145] NetLabel: unlabeled traffic allowed by default
  310. [ 0.297193] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
  311. [ 0.297193] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
  312. [ 0.297193] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
  313. [ 0.301990] Switching to clocksource hpet
  314. [ 0.302750] Switched to NOHz mode on CPU #0
  315. [ 0.302832] Switched to NOHz mode on CPU #1
  316. [ 0.302834] Switched to NOHz mode on CPU #2
  317. [ 0.302868] Switched to NOHz mode on CPU #3
  318. [ 0.309490] pnp: PnP ACPI init
  319. [ 0.309508] ACPI: bus type pnp registered
  320. [ 0.309590] pnp 00:00: [bus 00-ff]
  321. [ 0.309593] pnp 00:00: [io 0x0cf8-0x0cff]
  322. [ 0.309595] pnp 00:00: [io 0x0000-0x0cf7 window]
  323. [ 0.309597] pnp 00:00: [io 0x0d00-0xffff window]
  324. [ 0.309599] pnp 00:00: [mem 0x000a0000-0x000bffff window]
  325. [ 0.309601] pnp 00:00: [mem 0x000d0000-0x000dffff window]
  326. [ 0.309603] pnp 00:00: [mem 0x80000000-0xffffffff window]
  327. [ 0.309711] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
  328. [ 0.309720] pnp 00:01: [mem 0xfed14000-0xfed19fff]
  329. [ 0.309818] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
  330. [ 0.309823] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
  331. [ 0.309853] pnp 00:02: [dma 4]
  332. [ 0.309855] pnp 00:02: [io 0x0000-0x000f]
  333. [ 0.309857] pnp 00:02: [io 0x0081-0x0083]
  334. [ 0.309859] pnp 00:02: [io 0x0087]
  335. [ 0.309860] pnp 00:02: [io 0x0089-0x008b]
  336. [ 0.309862] pnp 00:02: [io 0x008f]
  337. [ 0.309864] pnp 00:02: [io 0x00c0-0x00df]
  338. [ 0.309932] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
  339. [ 0.309943] pnp 00:03: [io 0x0070-0x0071]
  340. [ 0.309951] pnp 00:03: [irq 8]
  341. [ 0.310040] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
  342. [ 0.310052] pnp 00:04: [io 0x0061]
  343. [ 0.310123] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
  344. [ 0.310136] pnp 00:05: [io 0x00f0-0x00ff]
  345. [ 0.310141] pnp 00:05: [irq 13]
  346. [ 0.310209] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
  347. [ 0.310361] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
  348. [ 0.310364] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
  349. [ 0.310366] pnp 00:06: [io 0x0290-0x0297]
  350. [ 0.310459] system 00:06: [io 0x0290-0x0297] has been reserved
  351. [ 0.310464] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
  352. [ 0.310559] pnp 00:07: [io 0x0010-0x001f]
  353. [ 0.310561] pnp 00:07: [io 0x0022-0x003f]
  354. [ 0.310563] pnp 00:07: [io 0x0044-0x004d]
  355. [ 0.310564] pnp 00:07: [io 0x0050-0x005f]
  356. [ 0.310568] pnp 00:07: [io 0x0062-0x0063]
  357. [ 0.310570] pnp 00:07: [io 0x0065-0x006f]
  358. [ 0.310572] pnp 00:07: [io 0x0072-0x007f]
  359. [ 0.310573] pnp 00:07: [io 0x0080]
  360. [ 0.310575] pnp 00:07: [io 0x0084-0x0086]
  361. [ 0.310577] pnp 00:07: [io 0x0088]
  362. [ 0.310578] pnp 00:07: [io 0x008c-0x008e]
  363. [ 0.310580] pnp 00:07: [io 0x0090-0x009f]
  364. [ 0.310582] pnp 00:07: [io 0x00a2-0x00bf]
  365. [ 0.310583] pnp 00:07: [io 0x00e0-0x00ef]
  366. [ 0.310585] pnp 00:07: [io 0x04d0-0x04d1]
  367. [ 0.310587] pnp 00:07: [io 0x0800-0x087f]
  368. [ 0.310589] pnp 00:07: [io 0x0400-0x03ff disabled]
  369. [ 0.310590] pnp 00:07: [io 0x0480-0x04bf]
  370. [ 0.310592] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
  371. [ 0.310594] pnp 00:07: [mem 0xfed20000-0xfed3ffff]
  372. [ 0.310596] pnp 00:07: [mem 0xfed50000-0xfed8ffff]
  373. [ 0.310598] pnp 00:07: [mem 0xffa00000-0xffafffff]
  374. [ 0.310600] pnp 00:07: [mem 0xffb00000-0xffbfffff]
  375. [ 0.310601] pnp 00:07: [mem 0xffe00000-0xffefffff]
  376. [ 0.310603] pnp 00:07: [mem 0xfff00000-0xfffffffe]
  377. [ 0.310714] system 00:07: [io 0x04d0-0x04d1] has been reserved
  378. [ 0.310719] system 00:07: [io 0x0800-0x087f] has been reserved
  379. [ 0.310723] system 00:07: [io 0x0480-0x04bf] has been reserved
  380. [ 0.310727] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
  381. [ 0.310732] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
  382. [ 0.310736] system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved
  383. [ 0.310740] system 00:07: [mem 0xffa00000-0xffafffff] has been reserved
  384. [ 0.310744] system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved
  385. [ 0.310748] system 00:07: [mem 0xffe00000-0xffefffff] has been reserved
  386. [ 0.310755] system 00:07: [mem 0xfff00000-0xfffffffe] has been reserved
  387. [ 0.310759] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
  388. [ 0.310821] pnp 00:08: [mem 0xfed00000-0xfed003ff]
  389. [ 0.310892] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
  390. [ 0.311156] pnp 00:09: [irq 4]
  391. [ 0.311158] pnp 00:09: [dma 0 disabled]
  392. [ 0.311160] pnp 00:09: [io 0x03f8-0x03ff]
  393. [ 0.311266] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
  394. [ 0.311310] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
  395. [ 0.311312] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
  396. [ 0.311401] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
  397. [ 0.311408] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
  398. [ 0.311412] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
  399. [ 0.311440] pnp 00:0b: [io 0x0060]
  400. [ 0.311442] pnp 00:0b: [io 0x0064]
  401. [ 0.311446] pnp 00:0b: [irq 1]
  402. [ 0.311519] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
  403. [ 0.311552] pnp 00:0c: [mem 0xe0000000-0xefffffff]
  404. [ 0.311648] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
  405. [ 0.311653] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
  406. [ 0.311809] pnp 00:0d: [mem 0x00000000-0x0009ffff]
  407. [ 0.311814] pnp 00:0d: [mem 0x000c0000-0x000cffff]
  408. [ 0.311816] pnp 00:0d: [mem 0x000e0000-0x000fffff]
  409. [ 0.311817] pnp 00:0d: [mem 0x00100000-0x7fffffff]
  410. [ 0.311819] pnp 00:0d: [mem 0x00000000-0xffffffffffffffff disabled]
  411. [ 0.311920] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
  412. [ 0.311925] system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved
  413. [ 0.311929] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
  414. [ 0.311934] system 00:0d: [mem 0x00100000-0x7fffffff] could not be reserved
  415. [ 0.311938] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
  416. [ 0.312079] pnp: PnP ACPI: found 14 devices
  417. [ 0.312082] ACPI: ACPI bus type pnp unregistered
  418. [ 0.316820] pci 0000:00:1c.0: BAR 8: assigned [mem 0x80000000-0x803fffff]
  419. [ 0.316826] pci 0000:00:1c.5: BAR 9: assigned [mem 0x80400000-0x805fffff 64bit pref]
  420. [ 0.316831] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
  421. [ 0.316835] pci 0000:00:1c.5: BAR 7: assigned [io 0x2000-0x2fff]
  422. [ 0.316839] pci 0000:00:01.0: PCI bridge to [bus 01-01]
  423. [ 0.316843] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
  424. [ 0.316848] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe9fffff]
  425. [ 0.316852] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
  426. [ 0.316858] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
  427. [ 0.316862] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
  428. [ 0.316868] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x803fffff]
  429. [ 0.316873] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
  430. [ 0.316880] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
  431. [ 0.316884] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
  432. [ 0.316890] pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff]
  433. [ 0.316895] pci 0000:00:1c.5: bridge window [mem 0x80400000-0x805fffff 64bit pref]
  434. [ 0.316902] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
  435. [ 0.316906] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
  436. [ 0.316912] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
  437. [ 0.316917] pci 0000:00:1e.0: bridge window [mem pref disabled]
  438. [ 0.316933] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  439. [ 0.316938] pci 0000:00:01.0: setting latency timer to 64
  440. [ 0.316942] pci 0000:00:1c.0: enabling device (0106 -> 0107)
  441. [ 0.316950] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  442. [ 0.316955] pci 0000:00:1c.0: setting latency timer to 64
  443. [ 0.316960] pci 0000:00:1c.5: enabling device (0106 -> 0107)
  444. [ 0.316964] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
  445. [ 0.316969] pci 0000:00:1c.5: setting latency timer to 64
  446. [ 0.316974] pci 0000:00:1e.0: setting latency timer to 64
  447. [ 0.316977] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
  448. [ 0.316979] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
  449. [ 0.316982] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
  450. [ 0.316984] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
  451. [ 0.316986] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
  452. [ 0.316988] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
  453. [ 0.316990] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfe9fffff]
  454. [ 0.316992] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
  455. [ 0.316994] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
  456. [ 0.316996] pci_bus 0000:03: resource 1 [mem 0x80000000-0x803fffff]
  457. [ 0.316998] pci_bus 0000:03: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
  458. [ 0.317013] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
  459. [ 0.317015] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
  460. [ 0.317017] pci_bus 0000:02: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
  461. [ 0.317019] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
  462. [ 0.317021] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
  463. [ 0.317023] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
  464. [ 0.317025] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
  465. [ 0.317027] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
  466. [ 0.317029] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
  467. [ 0.317031] pci_bus 0000:04: resource 8 [mem 0x80000000-0xffffffff]
  468. [ 0.317062] NET: Registered protocol family 2
  469. [ 0.317159] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
  470. [ 0.317751] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
  471. [ 0.318985] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  472. [ 0.319380] TCP: Hash tables configured (established 262144 bind 65536)
  473. [ 0.319385] TCP reno registered
  474. [ 0.319393] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  475. [ 0.319412] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  476. [ 0.319535] NET: Registered protocol family 1
  477. [ 0.319671] RPC: Registered udp transport module.
  478. [ 0.319675] RPC: Registered tcp transport module.
  479. [ 0.319678] RPC: Registered tcp NFSv4.1 backchannel transport module.
  480. [ 0.319696] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f30
  481. [ 0.319698] pci 0000:00:1a.0: Performing full reset
  482. [ 0.319713] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0030
  483. [ 0.319714] pci 0000:00:1a.1: Performing full reset
  484. [ 0.319729] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0030
  485. [ 0.319731] pci 0000:00:1a.2: Performing full reset
  486. [ 0.319769] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f30
  487. [ 0.319771] pci 0000:00:1d.0: Performing full reset
  488. [ 0.319785] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0030
  489. [ 0.319787] pci 0000:00:1d.1: Performing full reset
  490. [ 0.319801] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0030
  491. [ 0.319803] pci 0000:00:1d.2: Performing full reset
  492. [ 0.319844] pci 0000:01:00.0: Boot video device
  493. [ 0.319851] PCI: CLS 32 bytes, default 64
  494. [ 0.319908] Trying to unpack rootfs image as initramfs...
  495. [ 0.329536] Freeing initrd memory: 896k freed
  496. [ 0.332255] microcode: CPU0 sig=0x10677, pf=0x10, revision=0x705
  497. [ 0.332265] microcode: CPU1 sig=0x10677, pf=0x10, revision=0x705
  498. [ 0.332282] microcode: CPU2 sig=0x10677, pf=0x10, revision=0x705
  499. [ 0.332299] microcode: CPU3 sig=0x10677, pf=0x10, revision=0x705
  500. [ 0.332381] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
  501. [ 0.332751] audit: initializing netlink socket (disabled)
  502. [ 0.332764] type=2000 audit(1304673344.331:1): initialized
  503. [ 0.347682] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  504. [ 0.352983] VFS: Disk quotas dquot_6.5.2
  505. [ 0.353109] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  506. [ 0.354576] NTFS driver 2.1.30 [Flags: R/W DEBUG].
  507. [ 0.354828] fuse init (API version 7.16)
  508. [ 0.355285] msgmni has been set to 4012
  509. [ 0.355406] SELinux: Registering netfilter hooks
  510. [ 0.356199] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  511. [ 0.356208] io scheduler noop registered
  512. [ 0.356211] io scheduler deadline registered
  513. [ 0.356300] io scheduler cfq registered (default)
  514. [ 0.356418] pcieport 0000:00:01.0: setting latency timer to 64
  515. [ 0.356443] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
  516. [ 0.356533] pcieport 0000:00:1c.0: setting latency timer to 64
  517. [ 0.356564] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
  518. [ 0.356664] pcieport 0000:00:1c.5: setting latency timer to 64
  519. [ 0.356695] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
  520. [ 0.356963] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  521. [ 0.357269] Non-volatile memory driver v1.3
  522. [ 0.357275] Linux agpgart interface v0.103
  523. [ 0.357903] uvesafb: failed to execute /sbin/v86d
  524. [ 0.357906] uvesafb: make sure that the v86d helper is installed and executable
  525. [ 0.357911] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
  526. [ 0.357914] uvesafb: vbe_init() failed with -22
  527. [ 0.357919] uvesafb: probe of uvesafb.0 failed with error -22
  528. [ 0.358165] vesafb: framebuffer at 0xfb000000, mapped to 0xffffc90010980000, using 1875k, total 14336k
  529. [ 0.358170] vesafb: mode is 800x600x16, linelength=1600, pages=2
  530. [ 0.358173] vesafb: scrolling: redraw
  531. [ 0.358177] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
  532. [ 0.364326] Console: switching to colour frame buffer device 100x37
  533. [ 0.369894] fb0: VESA VGA frame buffer device
  534. [ 0.370333] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
  535. [ 0.370491] ACPI: Power Button [PWRB]
  536. [ 0.370648] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
  537. [ 0.370791] ACPI: Power Button [PWRF]
  538. [ 0.370977] ACPI: acpi_idle registered with cpuidle
  539. [ 0.373012] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  540. [ 0.637126] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  541. [ 0.720699] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  542. [ 0.737272] [drm] Initialized drm 1.1.0 20060810
  543. [ 0.743232] brd: module loaded
  544. [ 0.747566] loop: module loaded
  545. [ 0.750851] ata_piix 0000:00:1f.2: version 2.13
  546. [ 0.750868] ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
  547. [ 0.753645] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
  548. [ 0.756373] ata_piix 0000:00:1f.2: setting latency timer to 64
  549. [ 0.756990] scsi0 : ata_piix
  550. [ 0.759874] scsi1 : ata_piix
  551. [ 0.763846] ata1: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22
  552. [ 0.766601] ata2: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22
  553. [ 0.769311] ata_piix 0000:00:1f.5: PCI INT B -> GSI 22 (level, low) -> IRQ 22
  554. [ 0.772100] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
  555. [ 0.774831] ata_piix 0000:00:1f.5: setting latency timer to 64
  556. [ 0.775490] scsi2 : ata_piix
  557. [ 0.778386] scsi3 : ata_piix
  558. [ 0.782206] ata3: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb480 irq 22
  559. [ 0.784855] ata4: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb488 irq 22
  560. [ 0.787740] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
  561. [ 0.790394] e1000: Copyright (c) 1999-2006 Intel Corporation.
  562. [ 0.793123] atl1 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  563. [ 0.795774] atl1 0000:02:00.0: setting latency timer to 64
  564. [ 0.795811] atl1 0000:02:00.0: version 2.1.3
  565. [ 0.802591] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
  566. [ 0.805183] e100: Copyright(c) 1999-2006 Intel Corporation
  567. [ 0.807882] sky2: driver version 1.28
  568. [ 0.810647] console [netcon0] enabled
  569. [ 0.813170] netconsole: network logging started
  570. [ 0.815876] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  571. [ 0.818388] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
  572. [ 0.818408] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  573. [ 0.820884] ehci_hcd 0000:00:1a.7: setting latency timer to 64
  574. [ 0.820887] ehci_hcd 0000:00:1a.7: EHCI Host Controller
  575. [ 0.823300] drivers/usb/core/inode.c: creating file 'devices'
  576. [ 0.823303] drivers/usb/core/inode.c: creating file '001'
  577. [ 0.823380] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
  578. [ 0.834015] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
  579. [ 0.834020] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch
  580. [ 0.834046] ehci_hcd 0000:00:1a.7: debug port 1
  581. [ 0.836391] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
  582. [ 0.840264] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
  583. [ 0.840266] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
  584. [ 0.840279] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
  585. [ 0.842576] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
  586. [ 0.846457] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
  587. [ 0.852014] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
  588. [ 0.854326] usb usb1: default language 0x0409
  589. [ 0.854332] usb usb1: udev 1, busnum 1, minor = 0
  590. [ 0.854335] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  591. [ 0.856630] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  592. [ 0.858917] usb usb1: Product: EHCI Host Controller
  593. [ 0.861216] usb usb1: Manufacturer: Linux 2.6.38-gentoo-r4 ehci_hcd
  594. [ 0.863522] usb usb1: SerialNumber: 0000:00:1a.7
  595. [ 0.865900] usb usb1: usb_probe_device
  596. [ 0.865903] usb usb1: configuration #1 chosen from 1 choice
  597. [ 0.865909] usb usb1: adding 1-0:1.0 (config #1, interface 0)
  598. [ 0.865980] hub 1-0:1.0: usb_probe_interface
  599. [ 0.865985] hub 1-0:1.0: usb_probe_interface - got id
  600. [ 0.865987] hub 1-0:1.0: USB hub found
  601. [ 0.868299] hub 1-0:1.0: 6 ports detected
  602. [ 0.870618] hub 1-0:1.0: standalone hub
  603. [ 0.870620] hub 1-0:1.0: no power switching (usb 1.0)
  604. [ 0.870621] hub 1-0:1.0: individual port over-current protection
  605. [ 0.870623] hub 1-0:1.0: power on to power good time: 20ms
  606. [ 0.870627] hub 1-0:1.0: local power source is good
  607. [ 0.870629] hub 1-0:1.0: trying to enable port power on non-switchable hub
  608. [ 0.870658] drivers/usb/core/inode.c: creating file '001'
  609. [ 0.870698] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  610. [ 0.873094] ehci_hcd 0000:00:1d.7: setting latency timer to 64
  611. [ 0.873097] ehci_hcd 0000:00:1d.7: EHCI Host Controller
  612. [ 0.875488] drivers/usb/core/inode.c: creating file '002'
  613. [ 0.875567] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
  614. [ 0.884014] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
  615. [ 0.884019] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch
  616. [ 0.884044] ehci_hcd 0000:00:1d.7: debug port 1
  617. [ 0.886424] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
  618. [ 0.890313] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
  619. [ 0.890315] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
  620. [ 0.890327] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
  621. [ 0.892688] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
  622. [ 0.896566] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
  623. [ 0.902014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
  624. [ 0.904444] usb usb2: default language 0x0409
  625. [ 0.904450] usb usb2: udev 1, busnum 2, minor = 128
  626. [ 0.904452] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  627. [ 0.906845] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  628. [ 0.909296] usb usb2: Product: EHCI Host Controller
  629. [ 0.911690] usb usb2: Manufacturer: Linux 2.6.38-gentoo-r4 ehci_hcd
  630. [ 0.914089] usb usb2: SerialNumber: 0000:00:1d.7
  631. [ 0.916514] usb usb2: usb_probe_device
  632. [ 0.916517] usb usb2: configuration #1 chosen from 1 choice
  633. [ 0.916523] usb usb2: adding 2-0:1.0 (config #1, interface 0)
  634. [ 0.916598] hub 2-0:1.0: usb_probe_interface
  635. [ 0.916600] hub 2-0:1.0: usb_probe_interface - got id
  636. [ 0.916602] hub 2-0:1.0: USB hub found
  637. [ 0.918957] hub 2-0:1.0: 6 ports detected
  638. [ 0.921265] hub 2-0:1.0: standalone hub
  639. [ 0.921266] hub 2-0:1.0: no power switching (usb 1.0)
  640. [ 0.921268] hub 2-0:1.0: individual port over-current protection
  641. [ 0.921270] hub 2-0:1.0: power on to power good time: 20ms
  642. [ 0.921274] hub 2-0:1.0: local power source is good
  643. [ 0.921276] hub 2-0:1.0: trying to enable port power on non-switchable hub
  644. [ 0.921302] drivers/usb/core/inode.c: creating file '001'
  645. [ 0.921391] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  646. [ 0.923743] ohci_hcd: block sizes: ed 80 td 96
  647. [ 0.923808] uhci_hcd: USB Universal Host Controller Interface driver
  648. [ 0.926282] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  649. [ 0.928699] uhci_hcd 0000:00:1a.0: setting latency timer to 64
  650. [ 0.928702] uhci_hcd 0000:00:1a.0: UHCI Host Controller
  651. [ 0.931097] drivers/usb/core/inode.c: creating file '003'
  652. [ 0.931174] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
  653. [ 0.942015] uhci_hcd 0000:00:1a.0: detected 2 ports
  654. [ 0.944375] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
  655. [ 0.944377] uhci_hcd 0000:00:1a.0: Performing full reset
  656. [ 0.944389] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
  657. [ 0.944401] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c800
  658. [ 0.946752] usb usb3: default language 0x0409
  659. [ 0.946758] usb usb3: udev 1, busnum 3, minor = 256
  660. [ 0.946760] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  661. [ 0.949151] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  662. [ 0.951535] usb usb3: Product: UHCI Host Controller
  663. [ 0.953924] usb usb3: Manufacturer: Linux 2.6.38-gentoo-r4 uhci_hcd
  664. [ 0.956382] usb usb3: SerialNumber: 0000:00:1a.0
  665. [ 0.958858] usb usb3: usb_probe_device
  666. [ 0.958865] usb usb3: configuration #1 chosen from 1 choice
  667. [ 0.958870] usb usb3: adding 3-0:1.0 (config #1, interface 0)
  668. [ 0.958940] hub 3-0:1.0: usb_probe_interface
  669. [ 0.958942] hub 3-0:1.0: usb_probe_interface - got id
  670. [ 0.958946] hub 3-0:1.0: USB hub found
  671. [ 0.961324] hub 3-0:1.0: 2 ports detected
  672. [ 0.963627] hub 3-0:1.0: standalone hub
  673. [ 0.963629] hub 3-0:1.0: no power switching (usb 1.0)
  674. [ 0.963631] hub 3-0:1.0: individual port over-current protection
  675. [ 0.963632] hub 3-0:1.0: power on to power good time: 2ms
  676. [ 0.963636] hub 3-0:1.0: local power source is good
  677. [ 0.963638] hub 3-0:1.0: trying to enable port power on non-switchable hub
  678. [ 0.963656] drivers/usb/core/inode.c: creating file '001'
  679. [ 0.963681] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0
  680. [ 0.963702] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
  681. [ 0.966099] uhci_hcd 0000:00:1a.1: setting latency timer to 64
  682. [ 0.966102] uhci_hcd 0000:00:1a.1: UHCI Host Controller
  683. [ 0.968441] drivers/usb/core/inode.c: creating file '004'
  684. [ 0.968518] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
  685. [ 0.970924] ehci_hcd 0000:00:1a.7: GetStatus port:3 status 001403 0 ACK POWER sig=k CSC CONNECT
  686. [ 0.970927] hub 1-0:1.0: port 3: status 0501 change 0001
  687. [ 0.970934] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 001403 0 ACK POWER sig=k CSC CONNECT
  688. [ 0.970937] hub 1-0:1.0: port 4: status 0501 change 0001
  689. [ 0.970946] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001803 0 ACK POWER sig=j CSC CONNECT
  690. [ 0.970948] hub 1-0:1.0: port 6: status 0501 change 0001
  691. [ 0.983013] uhci_hcd 0000:00:1a.1: detected 2 ports
  692. [ 0.985430] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
  693. [ 0.985432] uhci_hcd 0000:00:1a.1: Performing full reset
  694. [ 0.985444] uhci_hcd 0000:00:1a.1: supports USB remote wakeup
  695. [ 0.985457] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c880
  696. [ 0.987830] usb usb4: default language 0x0409
  697. [ 0.987836] usb usb4: udev 1, busnum 4, minor = 384
  698. [ 0.987838] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  699. [ 0.990265] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  700. [ 0.992684] usb usb4: Product: UHCI Host Controller
  701. [ 0.995091] usb usb4: Manufacturer: Linux 2.6.38-gentoo-r4 uhci_hcd
  702. [ 0.997547] usb usb4: SerialNumber: 0000:00:1a.1
  703. [ 1.000095] usb usb4: usb_probe_device
  704. [ 1.000101] usb usb4: configuration #1 chosen from 1 choice
  705. [ 1.000106] usb usb4: adding 4-0:1.0 (config #1, interface 0)
  706. [ 1.000180] hub 4-0:1.0: usb_probe_interface
  707. [ 1.000182] hub 4-0:1.0: usb_probe_interface - got id
  708. [ 1.000183] hub 4-0:1.0: USB hub found
  709. [ 1.002592] hub 4-0:1.0: 2 ports detected
  710. [ 1.004952] hub 4-0:1.0: standalone hub
  711. [ 1.004953] hub 4-0:1.0: no power switching (usb 1.0)
  712. [ 1.004955] hub 4-0:1.0: individual port over-current protection
  713. [ 1.004957] hub 4-0:1.0: power on to power good time: 2ms
  714. [ 1.004961] hub 4-0:1.0: local power source is good
  715. [ 1.004963] hub 4-0:1.0: trying to enable port power on non-switchable hub
  716. [ 1.004978] drivers/usb/core/inode.c: creating file '001'
  717. [ 1.005016] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1
  718. [ 1.005032] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  719. [ 1.007452] uhci_hcd 0000:00:1a.2: setting latency timer to 64
  720. [ 1.007454] uhci_hcd 0000:00:1a.2: UHCI Host Controller
  721. [ 1.009839] drivers/usb/core/inode.c: creating file '005'
  722. [ 1.009917] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
  723. [ 1.021017] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
  724. [ 1.021021] hub 2-0:1.0: port 1: status 0501 change 0001
  725. [ 1.021030] ehci_hcd 0000:00:1d.7: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT
  726. [ 1.021033] hub 2-0:1.0: port 2: status 0501 change 0001
  727. [ 1.023013] uhci_hcd 0000:00:1a.2: detected 2 ports
  728. [ 1.025418] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
  729. [ 1.025420] uhci_hcd 0000:00:1a.2: Performing full reset
  730. [ 1.025432] uhci_hcd 0000:00:1a.2: supports USB remote wakeup
  731. [ 1.025437] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000cc00
  732. [ 1.027878] usb usb5: default language 0x0409
  733. [ 1.027884] usb usb5: udev 1, busnum 5, minor = 512
  734. [ 1.027886] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
  735. [ 1.030338] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  736. [ 1.032788] usb usb5: Product: UHCI Host Controller
  737. [ 1.035204] usb usb5: Manufacturer: Linux 2.6.38-gentoo-r4 uhci_hcd
  738. [ 1.037639] usb usb5: SerialNumber: 0000:00:1a.2
  739. [ 1.040156] usb usb5: usb_probe_device
  740. [ 1.040158] usb usb5: configuration #1 chosen from 1 choice
  741. [ 1.040165] usb usb5: adding 5-0:1.0 (config #1, interface 0)
  742. [ 1.040235] hub 5-0:1.0: usb_probe_interface
  743. [ 1.040237] hub 5-0:1.0: usb_probe_interface - got id
  744. [ 1.040239] hub 5-0:1.0: USB hub found
  745. [ 1.042621] hub 5-0:1.0: 2 ports detected
  746. [ 1.044994] hub 5-0:1.0: standalone hub
  747. [ 1.044995] hub 5-0:1.0: no power switching (usb 1.0)
  748. [ 1.044997] hub 5-0:1.0: individual port over-current protection
  749. [ 1.044999] hub 5-0:1.0: power on to power good time: 2ms
  750. [ 1.045013] hub 5-0:1.0: local power source is good
  751. [ 1.045015] hub 5-0:1.0: trying to enable port power on non-switchable hub
  752. [ 1.045038] drivers/usb/core/inode.c: creating file '001'
  753. [ 1.045065] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2
  754. [ 1.045082] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  755. [ 1.047501] uhci_hcd 0000:00:1d.0: setting latency timer to 64
  756. [ 1.047504] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  757. [ 1.049882] drivers/usb/core/inode.c: creating file '006'
  758. [ 1.049964] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
  759. [ 1.059014] uhci_hcd 0000:00:1d.0: detected 2 ports
  760. [ 1.061381] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
  761. [ 1.061383] uhci_hcd 0000:00:1d.0: Performing full reset
  762. [ 1.061395] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
  763. [ 1.061399] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c080
  764. [ 1.063765] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
  765. [ 1.063788] usb usb6: default language 0x0409
  766. [ 1.063794] usb usb6: udev 1, busnum 6, minor = 640
  767. [ 1.063796] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
  768. [ 1.066200] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  769. [ 1.068641] usb usb6: Product: UHCI Host Controller
  770. [ 1.071048] usb usb6: Manufacturer: Linux 2.6.38-gentoo-r4 uhci_hcd
  771. [ 1.073480] usb usb6: SerialNumber: 0000:00:1d.0
  772. [ 1.075927] hub 1-0:1.0: state 7 ports 6 chg 0058 evt 0000
  773. [ 1.075939] hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
  774. [ 1.075947] ehci_hcd 0000:00:1a.7: port 3 low speed --> companion
  775. [ 1.076033] usb usb6: usb_probe_device
  776. [ 1.076035] usb usb6: configuration #1 chosen from 1 choice
  777. [ 1.076040] usb usb6: adding 6-0:1.0 (config #1, interface 0)
  778. [ 1.076113] hub 6-0:1.0: usb_probe_interface
  779. [ 1.076115] hub 6-0:1.0: usb_probe_interface - got id
  780. [ 1.076117] hub 6-0:1.0: USB hub found
  781. [ 1.078495] hub 6-0:1.0: 2 ports detected
  782. [ 1.080858] hub 6-0:1.0: standalone hub
  783. [ 1.080860] hub 6-0:1.0: no power switching (usb 1.0)
  784. [ 1.080862] hub 6-0:1.0: individual port over-current protection
  785. [ 1.080863] hub 6-0:1.0: power on to power good time: 2ms
  786. [ 1.080867] hub 6-0:1.0: local power source is good
  787. [ 1.080869] hub 6-0:1.0: trying to enable port power on non-switchable hub
  788. [ 1.080884] drivers/usb/core/inode.c: creating file '001'
  789. [ 1.080914] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
  790. [ 1.080931] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  791. [ 1.083363] uhci_hcd 0000:00:1d.1: setting latency timer to 64
  792. [ 1.083365] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  793. [ 1.085739] drivers/usb/core/inode.c: creating file '007'
  794. [ 1.085815] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
  795. [ 1.102697] ata4: SATA link down (SStatus 0 SControl 300)
  796. [ 1.106019] uhci_hcd 0000:00:1a.1: port 1 portsc 01ab,00
  797. [ 1.106023] hub 4-0:1.0: port 1: status 0301 change 0003
  798. [ 1.106033] uhci_hcd 0000:00:1a.1: port 2 portsc 008a,00
  799. [ 1.110014] uhci_hcd 0000:00:1d.1: detected 2 ports
  800. [ 1.112431] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
  801. [ 1.112433] uhci_hcd 0000:00:1d.1: Performing full reset
  802. [ 1.112445] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
  803. [ 1.112457] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c400
  804. [ 1.114863] usb usb7: default language 0x0409
  805. [ 1.114869] usb usb7: udev 1, busnum 7, minor = 768
  806. [ 1.114871] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
  807. [ 1.117353] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  808. [ 1.119807] usb usb7: Product: UHCI Host Controller
  809. [ 1.122259] usb usb7: Manufacturer: Linux 2.6.38-gentoo-r4 uhci_hcd
  810. [ 1.124734] usb usb7: SerialNumber: 0000:00:1d.1
  811. [ 1.126019] ehci_hcd 0000:00:1a.7: GetStatus port:3 status 003002 0 ACK POWER OWNER sig=se0 CSC
  812. [ 1.126036] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
  813. [ 1.126040] ehci_hcd 0000:00:1a.7: port 4 low speed --> companion
  814. [ 1.127311] usb usb7: usb_probe_device
  815. [ 1.127318] usb usb7: configuration #1 chosen from 1 choice
  816. [ 1.127323] usb usb7: adding 7-0:1.0 (config #1, interface 0)
  817. [ 1.127383] hub 7-0:1.0: usb_probe_interface
  818. [ 1.127385] hub 7-0:1.0: usb_probe_interface - got id
  819. [ 1.127387] hub 7-0:1.0: USB hub found
  820. [ 1.129836] hub 7-0:1.0: 2 ports detected
  821. [ 1.132221] hub 7-0:1.0: standalone hub
  822. [ 1.132223] hub 7-0:1.0: no power switching (usb 1.0)
  823. [ 1.132225] hub 7-0:1.0: individual port over-current protection
  824. [ 1.132226] hub 7-0:1.0: power on to power good time: 2ms
  825. [ 1.132230] hub 7-0:1.0: local power source is good
  826. [ 1.132232] hub 7-0:1.0: trying to enable port power on non-switchable hub
  827. [ 1.132251] drivers/usb/core/inode.c: creating file '001'
  828. [ 1.132279] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
  829. [ 1.132292] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  830. [ 1.134747] uhci_hcd 0000:00:1d.2: setting latency timer to 64
  831. [ 1.134750] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  832. [ 1.137159] drivers/usb/core/inode.c: creating file '008'
  833. [ 1.137235] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
  834. [ 1.145018] uhci_hcd 0000:00:1a.2: port 2 portsc 0082,00
  835. [ 1.147013] uhci_hcd 0000:00:1d.2: detected 2 ports
  836. [ 1.149424] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
  837. [ 1.149426] uhci_hcd 0000:00:1d.2: Performing full reset
  838. [ 1.149437] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
  839. [ 1.149442] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c480
  840. [ 1.151855] usb usb8: default language 0x0409
  841. [ 1.151860] usb usb8: udev 1, busnum 8, minor = 896
  842. [ 1.151863] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
  843. [ 1.154351] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  844. [ 1.156809] usb usb8: Product: UHCI Host Controller
  845. [ 1.159273] usb usb8: Manufacturer: Linux 2.6.38-gentoo-r4 uhci_hcd
  846. [ 1.159274] usb usb8: SerialNumber: 0000:00:1d.2
  847. [ 1.159359] usb usb8: usb_probe_device
  848. [ 1.159361] usb usb8: configuration #1 chosen from 1 choice
  849. [ 1.159369] usb usb8: adding 8-0:1.0 (config #1, interface 0)
  850. [ 1.159432] hub 8-0:1.0: usb_probe_interface
  851. [ 1.159434] hub 8-0:1.0: usb_probe_interface - got id
  852. [ 1.159435] hub 8-0:1.0: USB hub found
  853. [ 1.159441] hub 8-0:1.0: 2 ports detected
  854. [ 1.159442] hub 8-0:1.0: standalone hub
  855. [ 1.159444] hub 8-0:1.0: no power switching (usb 1.0)
  856. [ 1.159445] hub 8-0:1.0: individual port over-current protection
  857. [ 1.159446] hub 8-0:1.0: power on to power good time: 2ms
  858. [ 1.159450] hub 8-0:1.0: local power source is good
  859. [ 1.159451] hub 8-0:1.0: trying to enable port power on non-switchable hub
  860. [ 1.159466] drivers/usb/core/inode.c: creating file '001'
  861. [ 1.159496] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
  862. [ 1.159610] usbcore: registered new interface driver usblp
  863. [ 1.159612] Initializing USB Mass Storage driver...
  864. [ 1.159684] usbcore: registered new interface driver usb-storage
  865. [ 1.159686] USB Mass Storage support registered.
  866. [ 1.159759] usbcore: registered new interface driver libusual
  867. [ 1.177019] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 003002 0 ACK POWER OWNER sig=se0 CSC
  868. [ 1.177034] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
  869. [ 1.180024] uhci_hcd 0000:00:1d.0: port 1 portsc 0082,00
  870. [ 1.180031] uhci_hcd 0000:00:1d.0: port 2 portsc 0082,00
  871. [ 1.185116] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
  872. [ 1.187635] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
  873. [ 1.193255] serio: i8042 KBD port at 0x60,0x64 irq 1
  874. [ 1.195999] mousedev: PS/2 mouse device common for all mice
  875. [ 1.198913] rtc_cmos 00:03: RTC can wake from S4
  876. [ 1.207091] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
  877. [ 1.209714] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
  878. [ 1.212356] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  879. [ 1.214964] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x400-0x40f]
  880. [ 1.220241] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  881. [ 1.225047] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  882. [ 1.225144] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  883. [ 1.228157] ata2.00: ATAPI: Optiarc DVD RW AD-7203S, 1.04, max UDMA/100
  884. [ 1.228233] ehci_hcd 0000:00:1a.7: port 6 full speed --> companion
  885. [ 1.228237] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 003801 0 ACK POWER OWNER sig=j CONNECT
  886. [ 1.228240] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
  887. [ 1.234120] ata2.00: configured for UDMA/100
  888. [ 1.238110] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: [email protected]
  889. [ 1.241214] cpuidle: using governor ladder
  890. [ 1.243046] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  891. [ 1.247234] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
  892. [ 1.247236] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
  893. [ 1.250236] ata1.00: configured for UDMA/133
  894. [ 1.250362] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5
  895. [ 1.250653] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
  896. [ 1.250703] sd 0:0:0:0: [sda] Write Protect is off
  897. [ 1.250705] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  898. [ 1.250727] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  899. [ 1.250756] sd 0:0:0:0: Attached scsi generic sg0 type 0
  900. [ 1.275618] ata3.00: ATA-8: ST3640323AS, SD35, max UDMA/133
  901. [ 1.275625] cpuidle: using governor menu
  902. [ 1.276962] usbcore: registered new interface driver usbhid
  903. [ 1.276964] usbhid: USB HID core driver
  904. [ 1.277603] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  905. [ 1.277645] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
  906. [ 1.277663] HDA Intel 0000:00:1b.0: setting latency timer to 64
  907. [ 1.279025] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 003002 0 ACK POWER OWNER sig=se0 CSC
  908. [ 1.279039] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
  909. [ 1.279044] hub 2-0:1.0: state 7 ports 6 chg 0006 evt 0000
  910. [ 1.279048] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
  911. [ 1.291997] ata3.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
  912. [ 1.292899] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7203S 1.04 PQ: 0 ANSI: 5
  913. [ 1.299312] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
  914. [ 1.302570] cdrom: Uniform CD-ROM driver Revision: 3.20
  915. [ 1.306170] sr 1:0:0:0: Attached scsi CD-ROM sr0
  916. [ 1.306431] sr 1:0:0:0: Attached scsi generic sg1 type 5
  917. [ 1.310505] hda_codec: ALC883: BIOS auto-probing.
  918. [ 1.319245] ALSA device list:
  919. [ 1.322383] #0: HDA Intel at 0xf9ff8000 irq 43
  920. [ 1.325433] Netfilter messages via NETLINK v0.30.
  921. [ 1.328386] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  922. [ 1.330218] ehci_hcd 0000:00:1d.7: port 1 high speed
  923. [ 1.330222] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
  924. [ 1.331580] ctnetlink v0.93: registering with nfnetlink.
  925. [ 1.334486] Refined TSC clocksource calibration: 2504.628 MHz.
  926. [ 1.337465] Switching to clocksource tsc
  927. [ 1.340828] ip_tables: (C) 2000-2006 Netfilter Core Team
  928. [ 1.343799] TCP cubic registered
  929. [ 1.346637] Initializing XFRM netlink socket
  930. [ 1.347530] ata3.00: configured for UDMA/133
  931. [ 1.347609] scsi 2:0:0:0: Direct-Access ATA ST3640323AS SD35 PQ: 0 ANSI: 5
  932. [ 1.347863] sd 2:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
  933. [ 1.347912] sd 2:0:0:0: [sdb] Write Protect is off
  934. [ 1.347914] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  935. [ 1.347922] sd 2:0:0:0: Attached scsi generic sg2 type 0
  936. [ 1.347936] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  937. [ 1.355383] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
  938. [ 1.366028] sdb: sdb1
  939. [ 1.374834] sd 2:0:0:0: [sdb] Attached SCSI disk
  940. [ 1.374923] NET: Registered protocol family 10
  941. [ 1.375645] ip6_tables: (C) 2000-2006 Netfilter Core Team
  942. [ 1.375697] IPv6 over IPv4 tunneling driver
  943. [ 1.376009] sd 0:0:0:0: [sda] Attached SCSI disk
  944. [ 1.376329] NET: Registered protocol family 17
  945. [ 1.376342] Registering the dns_resolver key type
  946. [ 1.376883] PM: Hibernation image not present or could not be loaded.
  947. [ 1.376895] registered taskstats version 1
  948. [ 1.377132] Magic number: 11:116:272
  949. [ 1.381019] usb 2-1: new high speed USB device using ehci_hcd and address 2
  950. [ 1.401123] md: Waiting for all devices to be available before autodetect
  951. [ 1.403648] md: If you don't use raid, use raid=noautodetect
  952. [ 1.406388] md: Autodetecting RAID arrays.
  953. [ 1.408887] md: Scanned 0 and added 0 devices.
  954. [ 1.411363] md: autorun ...
  955. [ 1.413787] md: ... autorun DONE.
  956. [ 1.416387] EXT3-fs (sda5): error: couldn't mount because of unsupported optional features (240)
  957. [ 1.432218] ehci_hcd 0000:00:1d.7: port 1 high speed
  958. [ 1.432222] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
  959. [ 1.451667] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
  960. [ 1.454232] VFS: Mounted root (ext2 filesystem) readonly on device 8:5.
  961. [ 1.458081] Freeing unused kernel memory: 628k freed
  962. [ 1.460674] Write protecting the kernel read-only data: 10240k
  963. [ 1.464620] Freeing unused kernel memory: 368k freed
  964. [ 1.474117] Freeing unused kernel memory: 2000k freed
  965. [ 1.496232] usb 2-1: default language 0x0409
  966. [ 1.497481] usb 2-1: udev 2, busnum 2, minor = 129
  967. [ 1.497484] usb 2-1: New USB device found, idVendor=058f, idProduct=6362
  968. [ 1.500034] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  969. [ 1.502542] usb 2-1: Product: Mass Storage Device
  970. [ 1.505048] usb 2-1: Manufacturer: Generic
  971. [ 1.507504] usb 2-1: SerialNumber: 058F312D81B
  972. [ 1.512534] kworker/u:0 used greatest stack depth: 5720 bytes left
  973. [ 1.512551] usb 2-1: usb_probe_device
  974. [ 1.512556] usb 2-1: configuration #1 chosen from 1 choice
  975. [ 1.512735] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
  976. [ 1.512805] usb-storage 2-1:1.0: usb_probe_interface
  977. [ 1.512810] usb-storage 2-1:1.0: usb_probe_interface - got id
  978. [ 1.512865] scsi4 : usb-storage 2-1:1.0
  979. [ 1.513008] drivers/usb/core/inode.c: creating file '002'
  980. [ 1.513042] hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
  981. [ 1.564217] ehci_hcd 0000:00:1d.7: port 2 high speed
  982. [ 1.564222] ehci_hcd 0000:00:1d.7: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
  983. [ 1.615015] usb 2-2: new high speed USB device using ehci_hcd and address 3
  984. [ 1.668218] ehci_hcd 0000:00:1d.7: port 2 high speed
  985. [ 1.668223] ehci_hcd 0000:00:1d.7: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
  986. [ 1.732729] usb 2-2: default language 0x0409
  987. [ 1.735604] usb 2-2: udev 3, busnum 2, minor = 130
  988. [ 1.735606] usb 2-2: New USB device found, idVendor=0951, idProduct=1603
  989. [ 1.738170] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  990. [ 1.740762] usb 2-2: Product: DataTraveler 2.0
  991. [ 1.743276] usb 2-2: Manufacturer: Kingston
  992. [ 1.745799] usb 2-2: SerialNumber: 0019E0028E0EB991A59C075F
  993. [ 1.748422] usb 2-2: usb_probe_device
  994. [ 1.748430] usb 2-2: configuration #1 chosen from 1 choice
  995. [ 1.748604] usb 2-2: adding 2-2:1.0 (config #1, interface 0)
  996. [ 1.748670] usb-storage 2-2:1.0: usb_probe_interface
  997. [ 1.748675] usb-storage 2-2:1.0: usb_probe_interface - got id
  998. [ 1.748749] scsi5 : usb-storage 2-2:1.0
  999. [ 1.751515] drivers/usb/core/inode.c: creating file '003'
  1000. [ 1.751539] hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0004
  1001. [ 1.751547] hub 4-0:1.0: port 1, status 0301, change 0000, 1.5 Mb/s
  1002. [ 1.853014] usb 4-1: new low speed USB device using uhci_hcd and address 2
  1003. [ 1.999840] usb 4-1: skipped 1 descriptor after interface
  1004. [ 1.999844] usb 4-1: skipped 1 descriptor after interface
  1005. [ 2.004837] usb 4-1: default language 0x0409
  1006. [ 2.024836] usb 4-1: udev 2, busnum 4, minor = 385
  1007. [ 2.024840] usb 4-1: New USB device found, idVendor=045e, idProduct=00db
  1008. [ 2.027531] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  1009. [ 2.030165] usb 4-1: Product: NaturalВ® Ergonomic Keyboard 4000
  1010. [ 2.032820] usb 4-1: Manufacturer: Microsoft
  1011. [ 2.035549] usb 4-1: usb_probe_device
  1012. [ 2.035557] usb 4-1: configuration #1 chosen from 1 choice
  1013. [ 2.037841] usb 4-1: adding 4-1:1.0 (config #1, interface 0)
  1014. [ 2.037929] usbhid 4-1:1.0: usb_probe_interface
  1015. [ 2.037932] usbhid 4-1:1.0: usb_probe_interface - got id
  1016. [ 2.059120] input: Microsoft NaturalВ® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input2
  1017. [ 2.064600] uhci_hcd 0000:00:1a.1: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
  1018. [ 2.064735] microsoft 0003:045E:00DB.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft NaturalВ® Ergonomic Keyboard 4000] on usb-0000:00:1a.1-1/input0
  1019. [ 2.070651] usb 4-1: adding 4-1:1.1 (config #1, interface 1)
  1020. [ 2.070728] usbhid 4-1:1.1: usb_probe_interface
  1021. [ 2.070731] usbhid 4-1:1.1: usb_probe_interface - got id
  1022. [ 2.092068] input: Microsoft NaturalВ® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/input/input3
  1023. [ 2.098123] uhci_hcd 0000:00:1a.1: reserve dev 2 ep82-INT, period 8, phase 4, 118 us
  1024. [ 2.098307] microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID v1.11 Device [Microsoft NaturalВ® Ergonomic Keyboard 4000] on usb-0000:00:1a.1-1/input1
  1025. [ 2.104565] drivers/usb/core/inode.c: creating file '002'
  1026. [ 2.104594] uhci_hcd 0000:00:1a.1: port 2 portsc 01a3,00
  1027. [ 2.104600] hub 4-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
  1028. [ 2.201637] cat used greatest stack depth: 4632 bytes left
  1029. [ 2.204019] usb usb3: suspend_rh (auto-stop)
  1030. [ 2.204037] usb usb7: suspend_rh (auto-stop)
  1031. [ 2.204054] usb usb8: suspend_rh (auto-stop)
  1032. [ 2.204084] usb usb6: suspend_rh (auto-stop)
  1033. [ 2.208013] hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
  1034. [ 2.310011] usb 4-2: new low speed USB device using uhci_hcd and address 3
  1035. [ 2.326446] init-early.sh used greatest stack depth: 4376 bytes left
  1036. [ 2.453841] usb 4-2: skipped 1 descriptor after interface
  1037. [ 2.458836] usb 4-2: default language 0x0409
  1038. [ 2.475839] usb 4-2: udev 3, busnum 4, minor = 386
  1039. [ 2.475842] usb 4-2: New USB device found, idVendor=046d, idProduct=c03e
  1040. [ 2.479461] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  1041. [ 2.483025] usb 4-2: Product: USB-PS/2 Optical Mouse
  1042. [ 2.486786] usb 4-2: Manufacturer: Logitech
  1043. [ 2.486890] usb 4-2: usb_probe_device
  1044. [ 2.486893] usb 4-2: configuration #1 chosen from 1 choice
  1045. [ 2.489840] usb 4-2: adding 4-2:1.0 (config #1, interface 0)
  1046. [ 2.489896] usbhid 4-2:1.0: usb_probe_interface
  1047. [ 2.489898] usbhid 4-2:1.0: usb_probe_interface - got id
  1048. [ 2.503117] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input4
  1049. [ 2.510986] generic-usb 0003:046D:C03E.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.1-2/input0
  1050. [ 2.518813] drivers/usb/core/inode.c: creating file '003'
  1051. [ 2.518840] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
  1052. [ 2.518843] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004
  1053. [ 2.518850] uhci_hcd 0000:00:1a.2: port 2 portsc 0093,00
  1054. [ 2.518856] hub 5-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
  1055. [ 2.519372] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
  1056. [ 2.523762] sd 4:0:0:0: Attached scsi generic sg3 type 0
  1057. [ 2.528379] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
  1058. [ 2.532775] sd 4:0:0:1: Attached scsi generic sg4 type 0
  1059. [ 2.537981] sd 4:0:0:0: [sdc] Attached SCSI removable disk
  1060. [ 2.542101] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
  1061. [ 2.546491] sd 4:0:0:2: Attached scsi generic sg5 type 0
  1062. [ 2.551612] sd 4:0:0:1: [sdd] Attached SCSI removable disk
  1063. [ 2.555871] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
  1064. [ 2.560349] sd 4:0:0:3: Attached scsi generic sg6 type 0
  1065. [ 2.565611] sd 4:0:0:2: [sde] Attached SCSI removable disk
  1066. [ 2.570861] sd 4:0:0:3: [sdf] Attached SCSI removable disk
  1067. [ 2.622016] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
  1068. [ 2.724018] usb 5-2: new full speed USB device using uhci_hcd and address 2
  1069. [ 2.752131] scsi 5:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
  1070. [ 2.756325] sd 5:0:0:0: Attached scsi generic sg7 type 0
  1071. [ 2.761862] sd 5:0:0:0: [sdg] Attached SCSI removable disk
  1072. [ 2.847008] usb 5-2: ep0 maxpacket = 16
  1073. [ 2.865887] usb 5-2: default language 0x0409
  1074. [ 2.886890] usb 5-2: udev 2, busnum 5, minor = 513
  1075. [ 2.886893] usb 5-2: New USB device found, idVendor=04e8, idProduct=3292
  1076. [ 2.890546] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  1077. [ 2.894086] usb 5-2: Product: ML-1640 Series
  1078. [ 2.897541] usb 5-2: Manufacturer: Samsung Electronics Co., Ltd.
  1079. [ 2.900999] usb 5-2: SerialNumber: 3515BAFS801841A.
  1080. [ 2.904523] usb 5-2: usb_probe_device
  1081. [ 2.904526] usb 5-2: configuration #1 chosen from 1 choice
  1082. [ 2.906890] usb 5-2: adding 5-2:1.0 (config #1, interface 0)
  1083. [ 2.906968] usblp 5-2:1.0: usb_probe_interface
  1084. [ 2.906971] usblp 5-2:1.0: usb_probe_interface - got id
  1085. [ 2.910937] usblp 5-2:1.0: looking for a minor, starting at 0
  1086. [ 2.911032] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3292
  1087. [ 2.914620] drivers/usb/core/inode.c: creating file '002'
  1088. [ 2.914642] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
  1089. [ 2.914645] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
  1090. [ 2.914648] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
  1091. [ 3.934532] <30>udevd[1202]: starting version 168
  1092. [ 6.000840] nvidia: module license 'NVIDIA' taints kernel.
  1093. [ 6.000844] Disabling lock debugging due to kernel taint
  1094. [ 6.809811] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  1095. [ 6.809819] nvidia 0000:01:00.0: setting latency timer to 64
  1096. [ 6.809823] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
  1097. [ 6.809917] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.41.03 Sat Apr 9 00:06:19 PDT 2011
  1098. [ 14.950464] EXT4-fs (sda5): re-mounted. Opts: (null)
  1099. [ 15.061317] mount[1705]: segfault at 8 ip 00007faefe34cd51 sp 00007fffa3a32968 error 4 in libc-2.13.so[7faefe2d0000+182000]
  1100. [ 16.202859] atl1 0000:02:00.0: irq 44 for MSI/MSI-X
  1101. [ 16.202914] atl1 0000:02:00.0: eth0 link is up 100 Mbps full duplex
  1102. [ 19.552665] Adding 2265128k swap on /dev/sda6. Priority:-1 extents:1 across:2265128k
  1103. [ 22.677841] mount[2421]: segfault at 8 ip 00007f46a86a3d51 sp 00007fffd192b7c8 error 4 in libc-2.13.so[7f46a8627000+182000]
  1104. [ 26.626005] eth0: no IPv6 routers present
  1105. [ 27.410018] uhci_hcd 0000:00:1a.1: reserve dev 3 ep81-INT, period 8, phase 4, 93 us
  1106. [ 30.502164] kdeinit4 used greatest stack depth: 3704 bytes left
  1107. [ 65.404463] mount[2606]: segfault at 0 ip 00007fc31c2e9fb4 sp 00007fff671056e0 error 4 in libc-2.13.so[7fc31c260000+182000]
  1108. [ 114.681362] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
  1109. [ 2146.848929] EXT4-fs (sda9): warning: maximal mount count reached, running e2fsck is recommended
  1110. [ 2146.849517] EXT4-fs (sda9): recovery complete
  1111. [ 2146.849693] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
  1112. [ 4937.209678] i2c /dev entries driver
  1113. [10293.558797] mount[19321]: segfault at 0 ip 00007f5e4bff9fb4 sp 00007fffcd04d5a0 error 4 in libc-2.13.so[7f5e4bf70000+182000]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!