bcm40183

Here below is dmesg after command "modprobe bcm4330". That command gives an error saying something like bcm4330 received the wrong parameters...

[ 7335.247430] Config Error: not for huawei mw269x sdio wifi module
[ 7335.259312] [bcm40183]: No gpio hw_mw269x_wl_enb for BCM40183 module
[ 7335.268788] [mmc]: mmc 3 power on !!
[ 7335.279079] [DHD]
[ 7335.279093] Dongle Host Driver, version 5.90.125.69
[ 7335.325972] [mmc]: sdxc_request_done(L1118): smc 3 err, cmd 52,  RTO !!
[ 7335.339383] [mmc]: sdxc_request_done(L1118): smc 3 err, cmd 52,  RTO !!
[ 7335.356006] [mmc]: sdxc_request_done(L1118): smc 3 err, cmd 8,  RTO !!
[ 7335.368797] [mmc]: sdxc_request_done(L1118): smc 3 err, cmd 5,  RTO !!
[ 7335.382405] [mmc]: sdxc_request_done(L1118): smc 3 err, cmd 5,  RTO !!
[ 7335.395033] [mmc]: sdxc_request_done(L1118): smc 3 err, cmd 5,  RTO !!
[ 7335.408401] [mmc]: sdxc_request_done(L1118): smc 3 err, cmd 5,  RTO !!
[ 7335.421034] [mmc]: sdxc_request_done(L1118): smc 3 err, cmd 55,  RTO !!
[ 7335.434441] [mmc]: sdxc_request_done(L1118): smc 3 err, cmd 55,  RTO !!
[ 7335.447237] [mmc]: sdxc_request_done(L1118): smc 3 err, cmd 55,  RTO !!
[ 7335.460603] [mmc]: sdxc_request_done(L1118): smc 3 err, cmd 55,  RTO !!
[ 7335.473421] [mmc]: sdxc_request_done(L1118): smc 3 err, cmd 1,  RTO !!
[ 7335.485354] [mmc]: mmc 3 power off !!
[ 7347.286810] [DHD] dhd_module_init: sdio_register_driver timeout
[ 7347.300119] Config Error: not for huawei mw269x sdio wifi module
[ 7347.311940] [bcm40183]: No gpio hw_mw269x_wl_enb for BCM40183 module