[   43.562130] irq 23: nobody cared (try booting with the "irqpoll" option)
[   43.562204] [<c0010505>] (unwind_backtrace+0x1/0x88) from [<c00632ff>] (__report_bad_irq+0x17/0x7c)
[   43.562240] [<c00632ff>] (__report_bad_irq+0x17/0x7c) from [<c00635e1>] (note_interrupt+0xf9/0x170)
[   43.562271] [<c00635e1>] (note_interrupt+0xf9/0x170) from [<c006292b>] (irq_thread+0xaf/0xf0)
[   43.562337] [<c006292b>] (irq_thread+0xaf/0xf0) from [<c003cb81>] (kthread+0x61/0x74)
[   43.562376] [<c003cb81>] (kthread+0x61/0x74) from [<c000c5fd>] (ret_from_fork+0x11/0x34)
[   43.562391] handlers:
[   43.562410] [<c0062261>] irq_default_primary_handler threaded [<c0202e0f>] tps65217_irq
[   43.562446] Disabling IRQ #23
[   43.564188] DCDC1: at 1500 mV
[   43.565335] vdd_mpu: 925 <--> 1325 mV at 1100 mV
[   43.566428] vdd_core: 925 <--> 1150 mV at 1100 mV
[   43.567513] LDO1: at 1800 mV
[   43.568600] LDO2: at 3300 mV
[   43.570503] LDO3: 1800 mV
[   43.571618] LDO4: at 3300 mV
[   43.572633] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[   43.573337] omap_i2c 44e0b000.i2c: unable to select pin group
[   43.574124] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
[   43.574840] I got: 32 bytes of memory
[   43.575044] tca8418_keypad 1-0034: tca8418_write_byte failed, reg: 1, val: 25, error: -121
[   43.578503] omap_i2c 4819c000.i2c: unable to select pin group
[   43.578733] media: Linux media interface: v0.10
[   43.578836] Linux video capture interface: v2.00
[   43.578960] pps_core: LinuxPPS API ver. 1 registered
[   43.578977] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[   43.579706] Advanced Linux Sound Architecture Driver Initialized.
[   43.581172] Switching to clocksource gp_timer
[   43.599180] NET: Registered protocol family 2
[   43.600224] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[   43.600367] TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
[   43.600530] TCP: Hash tables configured (established 4096 bind 4096)
[   43.600623] TCP: reno registered
[   43.600649] UDP hash table entries: 256 (order: 1, 12288 bytes)
[   43.600695] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[   43.601173] NET: Registered protocol family 1
[   43.601733] RPC: Registered named UNIX socket transport module.
[   43.601753] RPC: Registered udp transport module.
[   43.601766] RPC: Registered tcp transport module.
[   43.601780] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   43.602547] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[   43.603109] CPU PMU: attempt to register multiple PMU devices!
[   43.603149] arm-pmu: probe of arm-pmu failed with error -28
[   43.603534] omap2_mbox_probe: platform not supported
[   43.607548] VFS: Disk quotas dquot_6.5.2
[   43.607789] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   43.609047] NFS: Registering the id_resolver key type
[   43.609138] Key type id_resolver registered
[   43.609155] Key type id_legacy registered
[   43.609221] jffs2: version 2.2. (NAND) (SUMMARY)  �© 2001-2006 Red Hat, Inc.
[   43.609671] msgmni has been set to 996
[   43.612485] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[   43.612577] io scheduler noop registered
[   43.612595] io scheduler deadline registered
[   43.612655] io scheduler cfq registered (default)
[   43.614371] tps65217-bl tps65217-bl: no platform data provided
[   43.614412] tps65217-bl: probe of tps65217-bl failed with error -22
[   43.615407] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[   43.618012] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[   43.618298] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[   44.435337] console [ttyO0] enabled
[   44.440227] [drm] Initialized drm 1.1.0 20060810
[   44.458881] brd: module loaded
[   44.469192] loop: module loaded
[   44.472635] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[   44.479921] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[   44.487188] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[   44.494458] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[   44.501723] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[   44.516030] bone-capemgr bone_capemgr.9: bone: Invalid signature 'ffffffff' at baseboard
[   44.524531] bone-capemgr bone_capemgr.9: Failed to scan baseboard eeprom
[   44.533534] OneNAND driver initializing
[   44.539962] usbcore: registered new interface driver asix
[   44.545813] usbcore: registered new interface driver cdc_ether
[   44.552078] usbcore: registered new interface driver smsc95xx
[   44.558195] usbcore: registered new interface driver net1080
[   44.564217] usbcore: registered new interface driver cdc_subset
[   44.570508] usbcore: registered new interface driver zaurus
[   44.576509] usbcore: registered new interface driver cdc_ncm
[   44.583365] usbcore: registered new interface driver cdc_acm
[   44.589318] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   44.597704] Initializing USB Mass Storage driver...
[   44.602943] usbcore: registered new interface driver usb-storage
[   44.609246] USB Mass Storage support registered.
[   44.614274] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[   44.620952] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[   44.626206] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[   44.635198] musb-hdrc musb-hdrc.0.auto: *** mode=3
[   44.640332] musb-hdrc musb-hdrc.0.auto: *** power=250
[   44.646386] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[   44.651640] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[   44.660600] musb-hdrc musb-hdrc.1.auto: *** mode=1
[   44.665644] musb-hdrc musb-hdrc.1.auto: *** power=250
[   44.670955] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[   44.677359] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[   44.685794] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   44.692926] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   44.700503] usb usb1: Product: MUSB HDRC host driver
[   44.705720] usb usb1: Manufacturer: Linux 3.8.13-00720-g465c7df-dirty musb-hcd
[   44.713297] usb usb1: SerialNumber: musb-hdrc.1.auto
[   44.719639] hub 1-0:1.0: USB hub found
[   44.723688] hub 1-0:1.0: 1 port detected
[   44.729147] mousedev: PS/2 mouse device common for all mice
[   44.736409] synaptics_dsx_i2c 1-0022: synaptics_rmi4_set_page: I2C retry 1
[   44.767019] synaptics_dsx_i2c 1-0022: synaptics_rmi4_set_page: I2C retry 2
[   44.796300] synaptics_dsx_i2c 1-0022: synaptics_rmi4_set_page: I2C retry 3
[   44.825596] synaptics_dsx_i2c 1-0022: synaptics_rmi4_set_page: I2C retry 4
[   44.854902] synaptics_dsx_i2c 1-0022: synaptics_rmi4_set_page: I2C retry 5
[   44.884193] synaptics_dsx_i2c 1-0022: synaptics_rmi4_set_page: I2C retry 6
[   44.913487] synaptics_dsx_i2c 1-0022: synaptics_rmi4_set_page: I2C retry 7
[   44.942832] synaptics_dsx_i2c 1-0022: synaptics_rmi4_set_page: I2C retry 8
[   44.972080] synaptics_dsx_i2c 1-0022: synaptics_rmi4_set_page: I2C retry 9
[   45.001639] synaptics_dsx_i2c 1-0022: synaptics_rmi4_set_page: I2C retry 10
[   45.030512] synaptics_dsx_i2c 1-0022: synaptics_rmi4_set_input_dev: Failed to query device
[   45.039212] synaptics_dsx_i2c 1-0022: synaptics_rmi4_probe: Failed to set up input device
[   45.047885] synaptics_dsx_i2c: probe of 1-0022 failed with error -121
[   45.054992] rtc-pcf8563 1-0051: chip found, driver version 0.4.3
[   45.061527] rtc-pcf8563 1-0051: pcf8563_get_datetime: read error
[   45.068218] rtc-pcf8563 1-0051: rtc core: registered rtc-pcf8563 as rtc0
[   45.075347] i2c /dev entries driver
[   45.080776] pps_ldisc: PPS line discipline registered
[   45.086312] Driver for 1-wire Dallas network protocol.
[   45.093574] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[   45.101134] cpuidle: using governor ladder
[   45.105461] cpuidle: using governor menu
[   45.110061] omap_hsmmc mmc.5: of_parse_phandle_with_args of 'reset' failed
[   45.117285] omap_hsmmc mmc.5: Failed to get rstctl; not using any
[   45.124083] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[   45.131304] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[   45.138662] mmc.5 supply vmmc_aux not found, using dummy regulator
[   45.145611] omap_hsmmc mmc.5: pins are not configured from the driver
[   45.179539] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot 8
[   45.191322] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status -22
[   45.198630] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
[   45.207633] leds-gpio gpio-leds.8: pins are not configured from the driver
[   45.216283] ledtrig-cpu: registered to indicate activity on CPUs
[   45.223087] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[   45.230335] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[   45.238833] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[   45.245153] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[   45.252502] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[   45.264813] usbcore: registered new interface driver usbhid
[   45.270775] usbhid: USB HID core driver
[   45.278061] TCP: cubic registered
[   45.281623] Initializing XFRM netlink socket
[   45.286181] NET: Registered protocol family 17
[   45.291016] NET: Registered protocol family 15
[   45.295911] Key type dns_resolver registered
[   45.300725] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[   45.308856] ThumbEE CPU extension supported.
[   45.313370] Registering SWP/SWPB emulation handler
[   45.319489] registered taskstats version 1
[   45.346945] mmc0: host does not support reading read-only switch. assuming write-enable.
[   45.358741] mmc0: new high speed SDHC card at address e624
[   45.365323] mmcblk0: mmc0:e624 SU04G 3.69 GiB
[   45.371997]  mmcblk0: p1 p2
[   45.376263] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[   45.382678] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[   45.390262] libphy: 4a101000.mdio: probed
[   45.394530] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[   45.404379] Detected MACID = 00:18:31:e1:d0:02
[   45.409068] cpsw 4a100000.ethernet: NAPI disabled
[   45.415877] rtc-pcf8563 1-0051: pcf8563_get_datetime: read error
[   45.422230] rtc-pcf8563 1-0051: hctosys: unable to read the hardware clock
[   45.437048] net eth0: initializing cpsw version 1.12 (0)
[   45.444778] net eth0: phy found : id is : 0x7c0f1
[   45.449756] libphy: PHY 4a101000.mdio:01 not found
[   45.454849] net eth0: phy 4a101000.mdio:01 not found on slave 1
[   48.521234] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
[   48.540459] IP-Config: Complete:
[   48.543909]      device=eth0, hwaddr=00:18:31:e1:d0:02, ipaddr=192.168.0.155, mask=255.255.255.0, gw=11
[   48.554727]      host=elinux, domain=, nis-domain=(none)
[   48.560272]      bootserver=192.168.0.72, rootserver=192.168.0.72, rootpath=
[   48.567449] ALSA device list:
[   48.570739]   No soundcards found.
[   48.579669] VFS: Mounted root (nfs filesystem) on device 0:12.
[   48.586208] devtmpfs: mounted
[   48.589613] Freeing init memory: 248K