Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <6>[ 0.000000] Initializing cgroup subsys cpu
- <5>[ 0.000000] Linux version 3.0.72-g013a655-dirty (dan@Ziyan-PC2) (gcc version 4.9.1 20140529 (prerelease) (crosstool-NG linaro-1.13.1+bzr2665 - Linaro GCC 2014.06 - Cortex-A9) ) #2 SMP PREEMPT Wed Jul 2 11:19:25 CEST 2014
- <4>[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
- <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
- <4>[ 0.000000] Machine: Tuna
- <6>[ 0.000000] android_display: setting default resolution 720*1280, bpp=4
- <6>[ 0.000000] android_display: tiler1d 29491200
- <6>[ 0.000000] android_display: setting fb0.vram to 7864320
- <6>[ 0.000000] android_display: setting vram to 7864320
- <6>[ 0.000000] android_display: ion carveouts: 94240768 tiler2d, 10485760 nonsecure
- <6>[ 0.000000] omap4_total_ram_size = 0x40000000
- <6>[ 0.000000] omap4_smc_size = 0x300000
- <6>[ 0.000000] omap4_ion_heap_secure_input_size = 0x5a00000
- <6>[ 0.000000] omap4_ion_heap_secure_output_wfdhdcp_size = 0x1000000
- <6>[ 0.000000] omap4_ducati_heap_size = 0x6900000
- <6>[ 0.000000] omap4_ion_heap_tiler_mem_size = 0x5a00000
- <6>[ 0.000000] omap4_ion_heap_nonsec_tiler_mem_size = 0xa00000
- <6>[ 0.000000] omap4_smc_addr = 0xbfd00000
- <6>[ 0.000000] omap4_ion_heap_secure_input_addr = 0xba300000
- <6>[ 0.000000] omap4_ion_heap_secure_output_wfdhdcp_addr = 0xb9300000
- <6>[ 0.000000] omap4_ducati_heap_addr = 0xb2a00000
- <6>[ 0.000000] omap4_ion_heap_tiler_mem_addr = 0xad000000
- <6>[ 0.000000] omap4_ion_heap_nonsec_tiler_mem_addr = 0xac600000
- <6>[ 0.000000] omap_ion_init: secure_input id=2 [ba300000-bfd00000] size=5a00000
- <6>[ 0.000000] omap_ion_init: secure_output_wfdhdcp id=5 [b9300000-ba300000] size=1000000
- <6>[ 0.000000] omap_ion_init: tiler id=1 [ad000000-b2a00000] size=5a00000
- <6>[ 0.000000] omap_ion_init: nonsecure_tiler id=3 [ac600000-ad000000] size=a00000
- <6>[ 0.000000] omap_ion_init: system id=0 [0-0] size=0
- <6>[ 0.000000] omap_ion_init: tiler_reservation id=4 [0-0] size=0
- <6>[ 0.000000] Reserving 8388608 bytes SDRAM for VRAM
- <4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- <6>[ 0.000000] OMAP4460 ES1.1
- <6>[ 0.000000] SRAM: Mapped pa 0x4030d000 to va 0xfe40d000 size: 0x1000
- <6>[ 0.000000] SMC: Allocated workspace of 0x300000 Bytes at (0xbfd00000)
- <7>[ 0.000000] On node 0 totalpages: 206848
- <7>[ 0.000000] free_area_init_node: node 0, pgdat c0878260, node_mem_map c09f2000
- <7>[ 0.000000] Normal zone: 256 pages used for memmap
- <7>[ 0.000000] Normal zone: 0 pages reserved
- <7>[ 0.000000] Normal zone: 32512 pages, LIFO batch:7
- <7>[ 0.000000] HighMem zone: 1792 pages used for memmap
- <7>[ 0.000000] HighMem zone: 172288 pages, LIFO batch:31
- <6>[ 0.000000] PERCPU: Embedded 7 pages/cpu @c11f9000 s7520 r8192 d12960 u32768
- <7>[ 0.000000] pcpu-alloc: s7520 r8192 d12960 u32768 alloc=8*4096
- <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1
- <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 204800
- <5>[ 0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 mem=1G vmalloc=768M omap_wdt.timer_margin=30 no_console_suspend androidboot.serialno=0146A5B20900C00B androidboot.bootloader=PRIMEMD04 androidboot.baseband=I9250XXLJ1 lcd_bootfb=0xbea70000 mms_ts.panel_id=162 androidboot.macaddr=
- <6>[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
- <6>[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- <6>[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- <6>[ 0.000000] Memory: 256MB 452MB 96MB 1MB 3MB = 808MB total
- <5>[ 0.000000] Memory: 808084k/808084k available, 240492k reserved, 696320K highmem
- <5>[ 0.000000] Virtual kernel memory layout:
- <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- <5>[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
- <5>[ 0.000000] vmalloc : 0xc8800000 - 0xf8000000 ( 760 MB)
- <5>[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
- <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- <5>[ 0.000000] .init : 0xc0008000 - 0xc0053000 ( 300 kB)
- <5>[ 0.000000] .text : 0xc0053000 - 0xc0814000 (7940 kB)
- <5>[ 0.000000] .data : 0xc0814000 - 0xc087a088 ( 409 kB)
- <5>[ 0.000000] .bss : 0xc087a0ac - 0xc09f19f0 (1503 kB)
- <6>[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- <6>[ 0.000000] Preemptible hierarchical RCU implementation.
- <6>[ 0.000000] NR_IRQS:410
- <4>[ 0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
- <6>[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
- <6>[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- <6>[ 0.000030] Calibrating delay loop... 1194.24 BogoMIPS (lpj=4665344)
- <6>[ 0.070434] pid_max: default: 32768 minimum: 301
- <6>[ 0.070434] Security Framework initialized
- <6>[ 0.070648] SELinux: Initializing.
- <7>[ 0.070709] SELinux: Starting in permissive mode
- <6>[ 0.070709] Mount-cache hash table entries: 512
- <6>[ 0.070709] Initializing cgroup subsys debug
- <6>[ 0.070709] Initializing cgroup subsys cpuacct
- <6>[ 0.071685] Initializing cgroup subsys freezer
- <6>[ 0.071685] CPU: Testing write buffer coherency: ok
- <6>[ 0.072174] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
- <6>[ 0.072265] L310 cache controller enabled
- <6>[ 0.072296] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x5e470000, Cache size: 1048576 B
- <4>[ 0.150360] CPU1: Booted secondary processor
- <6>[ 0.165924] Brought up 2 CPUs
- <6>[ 0.181610] SMP: Total of 2 processors activated (2388.48 BogoMIPS).
- <4>[ 0.181854] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for emif_fw
- <4>[ 0.185516] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_instr
- <4>[ 0.185516] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_1
- <4>[ 0.185546] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_2
- <4>[ 0.185577] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_abe
- <4>[ 0.185577] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_cfg
- <4>[ 0.185607] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
- <4>[ 0.185607] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
- <4>[ 0.185607] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for mpu_private
- <4>[ 0.185729] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for sl2if
- <4>[ 0.185729] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for thermal_sensor
- <4>[ 0.185729] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ehci
- <4>[ 0.186096] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
- <4>[ 0.186096] omap_hwmod: l4_div_ck: missing clockdomain for l4_div_ck.
- <3>[ 0.189392] _omap4_module_wait_ready: Timeout waiting for module enable (mcpdm_fck: clkctrl = 0x30002)
- <4>[ 0.194244] omap_hwmod: mcpdm: cannot be enabled (3)
- <6>[ 0.196502] print_constraints: dummy:
- <6>[ 0.196899] NET: Registered protocol family 16
- <6>[ 0.197204] GPMC revision 6.0
- <6>[ 0.197204] EMIF0 is enabled with IRQ142
- <6>[ 0.197204] EMIF1 is enabled with IRQ143
- <6>[ 0.198608] Last reset was warm software reset (PRM_RSTST=0x2)
- <6>[ 0.198638]
- <6>[ 0.199035] OMAP GPIO hardware version 0.1
- <6>[ 0.200012] omap_mux_init: Add partition: #1: core, flags: 2
- <6>[ 0.200012] omap_mux_init: Add partition: #2: wkup, flags: 2
- <6>[ 0.201934] Tuna HW revision: 09 (Maguro 8th Sample), cpu OMAP4460 ES1.1
- <6>[ 0.205017] Using tuna_oled_factory_info_sm2a2
- <6>[ 0.207489] _omap_mux_init_gpio: Multiple gpio paths (2) for gpio102
- <3>[ 0.207550] omap_mux_init_gpio: Could not set gpio102
- <6>[ 0.208007] _omap_mux_init_gpio: Multiple gpio paths (2) for gpio101
- <3>[ 0.208007] omap_mux_init_gpio: Could not set gpio101
- <6>[ 0.208190] _omap_mux_init_gpio: Multiple gpio paths (2) for gpio100
- <3>[ 0.208251] omap_mux_init_gpio: Could not set gpio100
- <6>[ 0.208251] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
- <6>[ 0.208679] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
- <6>[ 0.208679] hw-breakpoint: maximum watchpoint size is 4 bytes.
- <6>[ 0.213623] HSI: device registered as omap_hwmod: hsi
- <6>[ 0.213623] OMAP DMA hardware revision 0.0
- <3>[ 0.213623] omap_rproc_get_pool: dsp - no carveout memory is available at all
- <3>[ 0.214782] omap_rproc_get_pool: ipu - no carveout memory is available at all
- <6>[ 0.222778] bio: create slab <bio-0> at 0
- <6>[ 0.223419] print_constraints: vwl1271: 2000 mV
- <4>[ 0.223419] i2c-core: driver [twl] using legacy suspend method
- <4>[ 0.223419] i2c-core: driver [twl] using legacy resume method
- <5>[ 0.224121] SCSI subsystem initialized
- <6>[ 0.225067] usbcore: registered new interface driver usbfs
- <6>[ 0.225433] usbcore: registered new interface driver hub
- <6>[ 0.225585] usbcore: registered new device driver usb
- <6>[ 0.225585] i2c-gpio i2c-gpio.5: using pins 98 (SDA) and 99 (SCL)
- <6>[ 0.226806] omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz
- <4>[ 0.227416] Skipping twl internal clock init and using bootloader value (unknown osc rate)
- <6>[ 0.231018] twl6030: PIH (irq 39) chaining IRQs 368..387
- <6>[ 0.233123] print_constraints: VUSB: 3300 mV normal standby
- <6>[ 0.233795] print_constraints: VMMC: 1800 mV normal standby
- <6>[ 0.234588] print_constraints: VPP: 1800 <--> 2500 mV at 1900 mV normal standby
- <6>[ 0.234588] print_constraints: VUSIM: 2200 mV normal standby
- <6>[ 0.234588] print_constraints: VCXIO: 1800 mV normal standby
- <6>[ 0.235534] print_constraints: VDAC: 1800 mV normal standby
- <6>[ 0.236267] print_constraints: VAUX1_6030: 3000 mV normal standby
- <6>[ 0.237152] print_constraints: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby
- <6>[ 0.237518] print_constraints: VAUX3_6030: 3100 mV normal standby
- <6>[ 0.238372] print_constraints: VDD3:
- <6>[ 0.239044] print_constraints: VMEM: at 1250 mV
- <6>[ 0.239807] print_constraints: V2V1: 2100 mV normal standby
- <6>[ 0.240570] print_constraints: VANA: 2100 mV normal standby
- <6>[ 0.241516] print_constraints: CLK32KG:
- <6>[ 0.242218] print_constraints: CLK32KAUDIO:
- <6>[ 0.242523] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
- <6>[ 0.242919] omap_i2c omap_i2c.3: bus 3 rev4.0 at 400 kHz
- <6>[ 0.243225] omap_i2c omap_i2c.4: bus 4 rev4.0 at 400 kHz
- <6>[ 0.244140] omap-rproc omap-rproc.0: dsp is available
- <6>[ 0.244140] omap-rproc omap-rproc.1: ipu is available
- <6>[ 0.244140] Advanced Linux Sound Architecture Driver Version 1.0.24.
- <6>[ 0.244140] Bluetooth: Core ver 2.16
- <6>[ 0.245452] NET: Registered protocol family 31
- <6>[ 0.245452] Bluetooth: HCI device and connection manager initialized
- <6>[ 0.245544] Bluetooth: HCI socket layer initialized
- <6>[ 0.245544] Bluetooth: L2CAP socket layer initialized
- <6>[ 0.245605] Bluetooth: SCO socket layer initialized
- <6>[ 0.246032] cfg80211: Calling CRDA to update world regulatory domain
- <6>[ 0.246185] Switching to clocksource 32k_counter
- <6>[ 0.251892] Switched to NOHz mode on CPU #0
- <6>[ 0.251922] Switched to NOHz mode on CPU #1
- <6>[ 0.263916] musb-hdrc: version 6.0, musb-dma, otg (peripheral+host)
- <7>[ 0.264251] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
- <7>[ 0.264312] musb-hdrc: MHDRC RTL version 2.0
- <7>[ 0.264343] musb-hdrc: setup fifo_mode 4
- <7>[ 0.264343] musb-hdrc: 28/31 max ep, 16384/16384 memory
- <6>[ 0.264343] musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124
- <6>[ 0.264862] NET: Registered protocol family 2
- <6>[ 0.265319] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
- <6>[ 0.266326] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- <6>[ 0.266326] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
- <6>[ 0.267028] TCP: Hash tables configured (established 16384 bind 16384)
- <6>[ 0.267028] TCP reno registered
- <6>[ 0.267059] UDP hash table entries: 128 (order: 0, 4096 bytes)
- <6>[ 0.267059] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
- <6>[ 0.267059] NET: Registered protocol family 1
- <6>[ 0.267059] Trying to unpack rootfs image as initramfs...
- <6>[ 0.324493] Freeing initrd memory: 736K
- <6>[ 0.809936] PHOENIX_LAST_TURNOFF_STS: 0x01
- <6>[ 0.810516] console [ttyFIQ0] enabled
- <6>[ 0.810516] Registered FIQ tty driver c78c1b40
- <6>[ 0.815124] ram_console: got buffer at 90000000, size 200000
- <6>[ 0.815399] ram_console: no valid data in buffer (sig = 0x00000000)
- <6>[ 0.837615] console [ram-1] enabled
- <3>[ 0.837615] omap_rpmsg_ini: out of carveout memory: 0 (0)
- <3>[ 0.837615] omap_rpmsg_ini: out of carveout memory: 0 (1)
- <6>[ 0.837615] omap-iommu omap-iommu.0: ducati registered
- <6>[ 0.837615] omap-iommu omap-iommu.1: tesla registered
- <6>[ 0.839385] audit: initializing netlink socket (disabled)
- <5>[ 0.839599] type=2000 audit(0.828:1): initialized
- <4>[ 0.840820] highmem bounce pool size: 64 pages
- <6>[ 0.841125] ashmem: initialized
- <6>[ 0.849151] fuse init (API version 7.16)
- <6>[ 0.849151] msgmni has been set to 219
- <7>[ 0.852996] SELinux: Registering netfilter hooks
- <6>[ 0.852996] Registering char device tf_driver (122:0)
- <6>[ 0.852996] SMCAG01.06p6.0 D
- <6>[ 0.855895] io scheduler noop registered
- <6>[ 0.855957] io scheduler deadline registered
- <6>[ 0.856201] io scheduler cfq registered (default)
- <6>[ 0.857208] OMAP DSS rev 4.0
- <6>[ 0.859771] dsscomp: initializing.
- <7>[ 0.860321] misc dsscomp: display0=s6e8aa0
- <7>[ 0.860504] misc dsscomp: display1=hdmi_panel
- <6>[ 0.860504] misc dsscomp: found 2 displays and 4 overlays, WB overlay 1
- <3>[ 0.861206] could not allocate slot
- <3>[ 0.861755] OMAPRPC: Registration of OMAPRPC rpmsg service returned 0!
- <3>[ 0.862701] OMAPRPC: debug=0
- <6>[ 0.862701] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
- <6>[ 0.863616] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
- <6>[ 0.864440] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
- <6>[ 0.865051] omap_ion_probe: adding heap secure_input of type 2 with ba300000@5a00000
- <6>[ 0.865051] omap_ion_probe: adding heap secure_output_wfdhdcp of type 2 with b9300000@800000
- <6>[ 0.865447] omap_ion_probe: adding heap tiler of type 4 with ad000000@5a00000
- <6>[ 0.865844] omap_ion_probe: adding heap nonsecure_tiler of type 4 with ac600000@a00000
- <6>[ 0.865844] omap_ion_probe: adding heap system of type 0 with 0@0
- <6>[ 0.866149] omap_ion_probe: adding heap tiler_reservation of type 5 with 0@0
- <6>[ 0.866149] brd: module loaded
- <6>[ 0.877014] loop: module loaded
- <6>[ 0.878021] input: barometer as /devices/virtual/input/input0
- <6>[ 0.878021] sec_jack_probe : Registering jack driver
- <6>[ 0.879302] i2c i2c-4: mpu_probe: 0
- <6>[ 0.904663] i2c i2c-4: Installing irq using 205
- <6>[ 0.904968] i2c i2c-4: Module Param interface = mpuirq
- <4>[ 0.904968] i2c-core: driver [mpu3050] using legacy suspend method
- <4>[ 0.905456] i2c-core: driver [mpu3050] using legacy resume method
- <6>[ 0.905456] mpu_init: Probe name mpu3050
- <6>[ 0.905456] i2c i2c-4: bma250_mod_probe: bma250
- <6>[ 0.905883] i2c i2c-4: Installing Accel irq using 282
- <6>[ 0.918487] i2c i2c-4: mpu3050: +bma250
- <6>[ 0.918487] bma250_mod_init: Probe name bma250_mod
- <6>[ 0.918792] i2c i2c-4: yas530_mod_probe: yas530
- <6>[ 0.918975] i2c i2c-4: Installing Compass irq using 336
- <6>[ 0.946472] i2c i2c-4: mpu3050: +yas530
- <6>[ 0.946655] yas530_mod_init: Probe name yas530_mod
- <6>[ 0.953186] omap_temp_sensor omap_temp_sensor.0: omap_temp_sensor probed
- <6>[ 0.963714] m25p80 spi3.0: w25q80 (1024 Kbytes)
- <6>[ 0.964935] PPP generic driver version 2.4.2
- <6>[ 0.965240] PPP Deflate Compression module registered
- <6>[ 0.965423] PPP BSD Compression module registered
- <6>[ 0.966247] PPP MPPE Compression module registered
- <6>[ 0.966430] NET: Registered protocol family 24
- <6>[ 0.968566] tun: Universal TUN/TAP device driver, 1.6
- <6>[ 0.968688] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- <6>[ 0.969055] usbcore: registered new interface driver asix
- <6>[ 0.969207] usbcore: registered new interface driver cdc_ether
- <6>[ 0.969451] usbcore: registered new interface driver net1080
- <6>[ 0.969604] usbcore: registered new interface driver cdc_subset
- <6>[ 0.969848] usbcore: registered new interface driver zaurus
- <6>[ 0.969940] cdc_ncm: 04-Aug-2011
- <6>[ 0.970184] usbcore: registered new interface driver cdc_ncm
- <6>[ 0.970275] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- <6>[ 0.970703] usbcore: registered new interface driver cdc_acm
- <6>[ 0.970825] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- <6>[ 0.970977] Initializing USB Mass Storage driver...
- <6>[ 0.971160] usbcore: registered new interface driver usb-storage
- <6>[ 0.971343] USB Mass Storage support registered.
- <6>[ 0.971618] usbcore: registered new interface driver usbserial
- <6>[ 0.971801] usbserial: USB Serial Driver core
- <6>[ 0.973541] android_usb gadget: Mass Storage Function, version: 2009/09/11
- <6>[ 0.973724] android_usb gadget: Number of LUNs=1
- <6>[ 0.973846] lun0: LUN: removable file: (no medium)
- <6>[ 0.974365] android_usb gadget: android_usb ready
- <6>[ 0.974456] musb-hdrc musb-hdrc: MUSB HDRC host driver
- <6>[ 0.974761] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 1
- <6>[ 0.974975] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- <6>[ 0.975158] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[ 0.975250] usb usb1: Product: MUSB HDRC host driver
- <6>[ 0.975433] usb usb1: Manufacturer: Linux 3.0.72-g013a655-dirty musb-hcd
- <6>[ 0.975616] usb usb1: SerialNumber: musb-hdrc
- <6>[ 0.976287] hub 1-0:1.0: USB hub found
- <6>[ 0.976409] hub 1-0:1.0: 1 port detected
- <6>[ 0.977264] usbcore: registered new interface driver xpad
- <6>[ 0.977416] usbcore: registered new interface driver usb_acecad
- <6>[ 0.977600] acecad: v3.2:USB Acecad Flair tablet driver
- <6>[ 0.977752] usbcore: registered new interface driver aiptek
- <6>[ 0.977935] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
- <6>[ 0.978027] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
- <6>[ 0.978271] usbcore: registered new interface driver gtco
- <4>[ 0.978363] GTCO usb driver version: 2.00.0006
- <6>[ 0.978607] usbcore: registered new interface driver hanwang
- <6>[ 0.978820] usbcore: registered new interface driver kbtab
- <6>[ 0.979003] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
- <6>[ 0.979156] usbcore: registered new interface driver wacom
- <6>[ 0.979339] wacom: v1.52:USB Wacom tablet driver
- <6>[ 0.979888] input: Melfas MMSxxx Touchscreen as /devices/platform/omap/omap_i2c.3/i2c-3/3-0048/input/input1
- <6>[ 1.356170] GPIO Input Driver: Start gpio inputs for tuna-gpio-keypad in interrupt mode
- <6>[ 1.356536] GPIO Input Driver: Start gpio inputs for tuna-gpio-keypad in interrupt mode
- <6>[ 1.356933] input: tuna-gpio-keypad as /devices/virtual/input/input2
- <6>[ 1.357879] input: proximity as /devices/virtual/input/input3
- <6>[ 1.358428] input: lightsensor-level as /devices/virtual/input/input4
- <6>[ 1.362518] using rtc device, twl_rtc, for alarms
- <6>[ 1.362640] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
- <6>[ 1.363159] i2c /dev entries driver
- <6>[ 1.364044] dmm: probe base: fd300000, irq 145
- <6>[ 1.367401] max17040 4-0036: MAX17040 Fuel-Gauge Ver 3
- <6>[ 1.369812] OMAP Watchdog Timer Rev 0x01: initial timeout 30 sec
- <6>[ 1.371826] device-mapper: uevent: version 1.0.3
- <6>[ 1.372375] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
- <6>[ 1.372589] Bluetooth: HCI UART driver ver 2.2
- <6>[ 1.372711] Bluetooth: HCI H4 protocol initialized
- <6>[ 1.373016] cpuidle: using governor ladder
- <6>[ 1.373107] cpuidle: using governor menu
- <6>[ 1.380554] usbcore: registered new interface driver usbhid
- <6>[ 1.380737] usbhid: USB HID core driver
- <6>[ 1.381378] logger: created 256K log 'log_main'
- <6>[ 1.381713] logger: created 256K log 'log_events'
- <6>[ 1.381958] logger: created 256K log 'log_radio'
- <6>[ 1.382171] logger: created 256K log 'log_system'
- <6>[ 1.383544] OMAP HSI: HSI driver version 0.4.3
- <6>[ 1.383911] omap_hsi omap_hsi.0: Registering IRQ hsi_p1_mpu (99)
- <6>[ 1.384155] omap_hsi omap_hsi.0: HSI port 1 initialized
- <6>[ 1.384246] omap_hsi omap_hsi.0: Registering IRQ hsi_dma_mpu (103)
- <6>[ 1.384582] omap_hsi omap_hsi.0: HSI Hardware REVISION 0x50043101
- <4>[ 1.386413] omap_hsi omap_hsi.0: Cannot set HSI FClk to default value: 96000000. Will retry on next open
- <6>[ 1.391906] SDP4430 SoC init
- <6>[ 1.427703] asoc: null-codec-dai <-> MultiMedia1 mapping ok
- <6>[ 1.429168] asoc: null-codec-dai <-> MultiMedia2 mapping ok
- <6>[ 1.431030] asoc: null-codec-dai <-> Voice mapping ok
- <6>[ 1.432464] asoc: null-codec-dai <-> Tones mapping ok
- <6>[ 1.433837] asoc: null-codec-dai <-> Vibra mapping ok
- <6>[ 1.434906] asoc: null-codec-dai <-> MODEM mapping ok
- <6>[ 1.435791] asoc: null-codec-dai <-> MultiMedia1 LP mapping ok
- <6>[ 1.437652] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
- <6>[ 1.439056] asoc: twl6040-dl1 <-> mcpdm-dl mapping ok
- <6>[ 1.440490] asoc: dit-hifi <-> omap-mcasp-dai mapping ok
- <4>[ 1.443450] twl6040-codec twl6040-codec: ASoC: Failed to create Aux/FM Stereo In debugfs file
- <6>[ 1.444580] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok
- <6>[ 1.445526] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok
- <6>[ 1.446533] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok
- <6>[ 1.447479] asoc: twl6040-vib <-> mcpdm-vib mapping ok
- <6>[ 1.448547] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
- <6>[ 1.449523] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
- <6>[ 1.453796] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
- <6>[ 1.454925] asoc: MODEM <-> omap-mcbsp-dai.1 mapping ok
- <6>[ 1.456146] asoc: null-codec-dai <-> omap-abe-vxrec-dai mapping ok
- <6>[ 1.462158] input: Tuna Headset Jack as /devices/platform/soc-audio/sound/card0/input5
- <6>[ 1.465393] asoc: hdmi-audio-codec <-> hdmi-audio-dai mapping ok
- <6>[ 1.466033] ALSA device list:
- <6>[ 1.466217] #0: TI OMAP4 Board
- <6>[ 1.466308] #1: OMAP4HDMI
- <6>[ 1.466522] GACT probability NOT on
- <6>[ 1.466613] Mirror/redirect action on
- <6>[ 1.466796] u32 classifier
- <6>[ 1.466888] Actions configured
- <6>[ 1.466979] Netfilter messages via NETLINK v0.30.
- <6>[ 1.467224] nf_conntrack version 0.5.0 (12637 buckets, 50548 max)
- <6>[ 1.468597] ctnetlink v0.93: registering with nfnetlink.
- <6>[ 1.468811] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- <6>[ 1.468933] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- <6>[ 1.469573] xt_time: kernel timezone is -0000
- <6>[ 1.472198] ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 1.472595] arp_tables: (C) 2002 David S. Miller
- <6>[ 1.472778] TCP cubic registered
- <6>[ 1.472869] Initializing XFRM netlink socket
- <6>[ 1.474884] NET: Registered protocol family 10
- <6>[ 1.481750] Mobile IPv6
- <6>[ 1.481903] ip6_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 1.482513] IPv6 over IPv4 tunneling driver
- <6>[ 1.490295] NET: Registered protocol family 17
- <6>[ 1.490509] NET: Registered protocol family 15
- <6>[ 1.490844] Bluetooth: RFCOMM TTY layer initialized
- <6>[ 1.490966] Bluetooth: RFCOMM socket layer initialized
- <6>[ 1.491149] Bluetooth: RFCOMM ver 1.11
- <6>[ 1.491271] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>[ 1.491424] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <6>[ 1.491699] NET: Registered protocol family 35
- <6>[ 1.492309] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
- <6>[ 1.492523] ThumbEE CPU extension supported.
- <5>[ 1.492706] Registering SWP/SWPB emulation handler
- <6>[ 1.495208] mmc0: new high speed MMC card at address 0001
- <6>[ 1.495880] mmcblk0: mmc0:0001 VYL00M 14.6 GiB
- <6>[ 1.496154] mmcblk0boot0: mmc0:0001 VYL00M partition 1 512 KiB
- <6>[ 1.496459] mmcblk0boot1: mmc0:0001 VYL00M partition 2 512 KiB
- <6>[ 1.502746] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13
- <6>[ 1.506011] mmcblk0boot1: unknown partition table
- <6>[ 1.507659] mmcblk0boot0: unknown partition table
- <6>[ 1.509643] Reprogramming LPDDR2 timings to 400000000 Hz
- <4>[ 1.510040] sr_init: No PMIC hook to init smartreflex
- <6>[ 1.510345] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
- <6>[ 1.510681] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
- <6>[ 1.510986] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized
- <6>[ 1.511383] SmartReflex class 1.5 driver: initialized (86400000ms)
- <3>[ 1.512145] Power Management for TI OMAP4.
- <6>[ 1.512390] OMAP4 PM: Static dependency added between MPUSS and DUCATI <-> L4_PER/CFG and L3_1.
- <6>[ 1.514526] dmtimer id 10 at 48086000...
- <6>[ 1.514617] OMAP_TIMER_OCP_CFG_REG: 0x000015
- <6>[ 1.514770] OMAP_TIMER_SYS_STAT_REG: 0x000001
- <6>[ 1.514862] OMAP_TIMER_STAT_REG: 0x000000
- <6>[ 1.514953] OMAP_TIMER_INT_EN_REG: 0x000000
- <6>[ 1.515106] OMAP_TIMER_WAKEUP_EN_REG: 0x000000
- <6>[ 1.515197] OMAP_TIMER_CTRL_REG: 0x000000
- <6>[ 1.515350] OMAP_TIMER_COUNTER_REG: 0x000000
- <6>[ 1.515441] OMAP_TIMER_LOAD_REG: 0x000000
- <6>[ 1.515502] OMAP_TIMER_MATCH_REG: 0x000000
- <6>[ 1.515655] OMAP_TIMER_IF_CTRL_REG: 0x000004
- <6>[ 1.516326] dmtimer id 10 at 48086000...
- <6>[ 1.516418] OMAP_TIMER_OCP_CFG_REG: 0x000015
- <6>[ 1.516571] OMAP_TIMER_SYS_STAT_REG: 0x000001
- <6>[ 1.516632] OMAP_TIMER_STAT_REG: 0x000000
- <6>[ 1.516723] OMAP_TIMER_INT_EN_REG: 0x000000
- <6>[ 1.516815] OMAP_TIMER_WAKEUP_EN_REG: 0x000000
- <6>[ 1.516906] OMAP_TIMER_CTRL_REG: 0x001842
- <6>[ 1.517059] OMAP_TIMER_COUNTER_REG: 0xfffffffe
- <6>[ 1.517120] OMAP_TIMER_LOAD_REG: 0xfffffa56
- <6>[ 1.517211] OMAP_TIMER_MATCH_REG: 0xfffffa60
- <6>[ 1.517364] OMAP_TIMER_IF_CTRL_REG: 0x000004
- <6>[ 1.518280] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:0 (mask:ff)
- <6>[ 1.518554] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:1 (mask:ff)
- <6>[ 1.518829] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:2 (mask:ff)
- <6>[ 1.519073] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:3 (mask:ff)
- <6>[ 1.519256] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:4 (mask:ff)
- <6>[ 1.519500] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:5 (mask:ff)
- <6>[ 1.519775] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:6 (mask:ff)
- <6>[ 1.520141] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:7 (mask:ff)
- <6>[ 1.520751] max17040 4-0036: online = 1 vcell = 3967500 soc = 80 status = 3 health = 1 temp = 230 charger status = 0
- <6>[ 1.540344] clock: disabling unused clocks to save power
- <6>[ 1.621795] cannot apply mgr(lcd) on inactive device
- <4>[ 1.622222] omapfb omapfb: failed to apply dispc config
- <6>[ 1.622589] cannot apply mgr(tv) on inactive device
- <4>[ 1.622863] omapfb omapfb: failed to apply dispc config
- <6>[ 1.623229] cannot apply mgr(lcd2) on inactive device
- <4>[ 1.623504] omapfb omapfb: failed to apply dispc config
- <6>[ 1.628753] regulator_init_complete: VDAC: disabling
- <6>[ 1.630584] regulator_init_complete: VUSB: disabling
- <4>[ 1.631561] ## wifi_probe
- <4>[ 1.631744] wifi_set_power = 1
- <4>[ 2.152801] wifi_set_carddetect = 1
- <4>[ 2.153503]
- <4>[ 2.153533] Dongle Host Driver, version 5.90.195.114
- <4>[ 2.153533] Compiled in drivers/net/wireless/bcmdhd on Jul 2 2014 at 11:18:39
- <6>[ 2.207427] sr_class1p5_calib_work: core: Calibration complete: Voltage:Nominal=1127000,Calib=1012840,margin=13000
- <6>[ 2.207519] sr_class1p5_calib_work: mpu: Calibration complete: Voltage:Nominal=1380000,Calib=1220000,margin=0
- <4>[ 2.268768] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
- <4>[ 2.313781] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- <4>[ 2.324584] sr_class1p5_calib_work: iva Stop sampling: Voltage Nominal=950000 samples=129
- <6>[ 2.324768] sr_class1p5_calib_work: iva: Calibration complete: Voltage:Nominal=950000,Calib=860920,margin=13000
- <6>[ 2.326202] mmc1: new high speed SDIO card at address 0001
- <4>[ 2.326904] F1 signature read @0x18000000=0x16844330
- <4>[ 2.330291] DHD: dongle ram size is set to 294912(orig 294912)
- <4>[ 2.330841] wl_create_event_handler thr:60 started
- <4>[ 2.333465] p2p0: P2P Interface Registered
- <4>[ 2.333587] dhd_attach thr:61 started
- <4>[ 2.333709] dhd_attach thr:62 started
- <4>[ 2.333862] dhd_attach thr:63 started
- <4>[ 2.336395] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
- <4>[ 2.336517] wifi_set_power = 0
- <4>[ 2.856506] =========== WLAN placed in RESET ========
- <6>[ 2.858276] fsa9480 4-0025: cable detect change, from 'unknown/none' to 'usb-peripheral'
- <6>[ 2.861175] twl_rtc twl_rtc: setting system clock to 2014-07-02 09:30:19 UTC (1404293419)
- <6>[ 2.863159] Freeing init memory: 300K
- <7>[ 2.880615] SELinux: 512 avtab hash slots, 1331 rules.
- <7>[ 2.881256] SELinux: 512 avtab hash slots, 1331 rules.
- <7>[ 2.881317] SELinux: 1 users, 2 roles, 288 types, 1 bools, 1 sens, 1024 cats
- <7>[ 2.881530] SELinux: 84 classes, 1331 rules
- <7>[ 2.882446] SELinux: Completing initialization.
- <7>[ 2.882537] SELinux: Setting up existing superblocks.
- <7>[ 2.882629] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- <7>[ 2.882720] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
- <7>[ 2.882843] SELinux: initialized (dev bdev, type bdev), not configured for labeling
- <7>[ 2.882934] SELinux: initialized (dev proc, type proc), uses genfs_contexts
- <7>[ 2.883056] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 2.883117] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
- <7>[ 2.886566] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
- <7>[ 2.886688] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
- <7>[ 2.886749] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
- <7>[ 2.886871] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
- <7>[ 2.886993] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
- <7>[ 2.887145] SELinux: initialized (dev mtd_inodefs, type mtd_inodefs), not configured for labeling
- <7>[ 2.887268] SELinux: initialized (dev usbfs, type usbfs), not configured for labeling
- <7>[ 2.887359] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 2.887451] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- <6>[ 3.012878] max17040 4-0036: online = 1 vcell = 3998750 soc = 80 status = 3 health = 1 temp = 230 charger status = 0
- <5>[ 3.034423] type=1403 audit(1404293419.664:2): policy loaded auid=4294967295 ses=4294967295
- <4>[ 3.035034] SELinux: Loaded policy from /sepolicy
- <5>[ 3.045593] type=1404 audit(1404293419.679:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
- <4>[ 3.058990] sr_class1p5_calib_work: core Stop sampling: Voltage Nominal=962000 samples=12
- <6>[ 3.059478] sr_class1p5_calib_work: core: Calibration complete: Voltage:Nominal=962000,Calib=886240,margin=38000
- <4>[ 3.059814] sr_class1p5_calib_work: mpu Stop sampling: Voltage Nominal=1025000 samples=12
- <6>[ 3.060089] sr_class1p5_calib_work: mpu: Calibration complete: Voltage:Nominal=1025000,Calib=840000,margin=10000
- <6>[ 4.012573] max17040 4-0036: online = 1 vcell = 3998750 soc = 80 status = 1 health = 1 temp = 230 charger status = 0
- <4>[ 4.398040] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
- <3>[ 4.399108] init: do_chown: Could not access /selinux/booleans
- <3>[ 4.531036] init: /dev/hw_random not found
- <7>[ 4.552368] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
- <7>[ 4.553588] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 4.559387] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 4.560211] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 4.560882] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 4.583465] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
- <6>[ 4.604278] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null)
- <7>[ 4.604522] SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
- <6>[ 4.614257] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
- <7>[ 4.614624] SELinux: initialized (dev mmcblk0p3, type ext4), uses xattr
- <6>[ 4.649749] mms_ts 3-0048: fw version 0x65 already present
- <6>[ 4.650451] mms_ts 3-0048: Melfas MMS-series touch controller initialized
- <6>[ 4.669158] EXT4-fs (mmcblk0p11): recovery complete
- <6>[ 4.672302] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
- <7>[ 4.672668] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr
- <6>[ 4.690399] HDCP: loaded keys
- <6>[ 4.724060] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/omap/omap_hsmmc.0/by-name/cache
- <6>[ 4.809692] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
- <6>[ 4.809967] e2fsck: /dev/block/platform/omap/omap_hsmmc.0/by-name/cache: clean, 143/27648 files, 23700/110592 blocks
- <6>[ 4.825378] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
- <7>[ 4.825714] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr
- <6>[ 4.893768] EXT4-fs (mmcblk0p12): recovery complete
- <6>[ 4.898437] EXT4-fs (mmcblk0p12): mounted filesystem with writeback data mode. Opts: nomblk_io_submit,errors=remount-ro
- <7>[ 4.898803] SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr
- <6>[ 4.942718] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/omap/omap_hsmmc.0/by-name/userdata
- <6>[ 4.986083] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
- <6>[ 4.986267] e2fsck: /dev/block/platform/omap/omap_hsmmc.0/by-name/userdata: clean, 24894/887696 files, 1899865/3549691 blocks
- <6>[ 4.998229] EXT4-fs (mmcblk0p12): mounted filesystem with writeback data mode. Opts: nomblk_io_submit,errors=panic
- <7>[ 4.998413] SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr
- <6>[ 5.003387] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null)
- <6>[ 5.004302] sr_class1p5_calib_work: mpu: Calibration complete: Voltage:Nominal=1203000,Calib=970000,margin=0
- <6>[ 5.031433] SELinux: Context u:object_r:adb_keys_file:s0 is not valid (left unmapped).
- <3>[ 5.163757] init: /dev/hw_random not found
- <5>[ 5.196166] type=1400 audit(1404293421.820:4): avc: denied { entrypoint } for pid=123 comm="init" path="/sbin/healthd" dev=rootfs ino=1539 scontext=u:r:healthd:s0 tcontext=u:object_r:rootfs:s0 tclass=file
- <3>[ 5.209991] healthd: wakealarm_init: timerfd_create failed
- <4>[ 5.217987] healthd: BatteryPresentPath not found
- <3>[ 5.232147] android_usb: already disabled
- <6>[ 5.235717] adb_open
- <6>[ 5.235839] mtp_bind_config
- <6>[ 5.235900] adb_bind_config
- <6>[ 5.283355] warning: `daemonsu' uses 32-bit capabilities (legacy support in use)
- <7>[ 5.329711] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
- <6>[ 5.412414] EXT4-fs (mmcblk0p10): re-mounted. Opts: (null)
- <6>[ 5.666564] android_work: sent uevent USB_STATE=CONNECTED
- <6>[ 5.671325] android_work: sent uevent USB_STATE=DISCONNECTED
- <6>[ 5.749633] android_work: sent uevent USB_STATE=CONNECTED
- <6>[ 5.751647] android_usb gadget: high speed config #1: android
- <6>[ 5.751800] android_work: sent uevent USB_STATE=CONFIGURED
- <6>[ 5.760803] EXT4-fs (mmcblk0p10): re-mounted. Opts: (null)
- <6>[ 5.823547] EXT4-fs (mmcblk0p10): re-mounted. Opts: (null)
- <7>[ 5.851013] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <6>[ 6.080291] [MODEM_IF] misc_open : umts_boot0
- <6>[ 6.080383] omap_hsi omap_hsi.0: HSI clock is now 96000000
- <6>[ 6.080841] omap_hsi omap_hsi.0: Entering RX wakeup in 3 wires mode (no CAWAKE)
- <6>[ 6.080932] [MODEM_IF] xmm6260_off()
- <6>[ 6.081054] [MODEM_IF] xmm6260_on()
- <4>[ 6.394439] omap_hsi omap_hsi.0: CAWAKE edge in RX 3 wires, exiting
- <6>[ 6.402770] [MODEM_IF] misc_release : umts_boot0
- <6>[ 6.402893] [MODEM_IF] misc_open : umts_boot1
- <6>[ 6.402954] omap_hsi omap_hsi.0: Entering RX wakeup in 4 wires mode
- <6>[ 6.634155] request_suspend_state: wakeup (3->0) at 6629943529 (2014-07-02 09:30:23.266968003 UTC)
- <3>[ 6.635284] init: untracked pid 323 exited
- <6>[ 9.549224] [MODEM_IF] misc_release : umts_boot1
- <6>[ 9.550415] [MODEM_IF] misc_open : umts_ipc0
- <6>[ 9.550781] omap_hsi omap_hsi.0: Entering RX wakeup in 4 wires mode
- <6>[ 9.550994] [MODEM_IF] misc_open : umts_rfs0
- <6>[ 9.651641] [MODEM_IF] PA EVENT : reset =1, pa=1, cp_dump=0
- <6>[ 9.651824] [MODEM_IF] umts_ipc0 state changed: ONLINE
- <6>[ 10.897796] request_suspend_state: wakeup (0->0) at 10893584887 (2014-07-02 09:30:27.530609361 UTC)
- <3>[ 10.898712] init: untracked pid 360 exited
- <6>[ 15.873718] request_suspend_state: wakeup (0->0) at 15869475999 (2014-07-02 09:30:32.506500473 UTC)
- <3>[ 15.874572] init: untracked pid 399 exited
- <6>[ 21.218933] request_suspend_state: wakeup (0->0) at 21214721362 (2014-07-02 09:30:37.851745836 UTC)
- <3>[ 21.220001] init: untracked pid 442 exited
- <6>[ 25.532684] request_suspend_state: wakeup (0->0) at 25528442064 (2014-07-02 09:30:42.165466538 UTC)
- <3>[ 25.533569] init: untracked pid 473 exited
- <6>[ 30.894592] request_suspend_state: wakeup (0->0) at 30890350023 (2014-07-02 09:30:47.527374497 UTC)
- <6>[ 36.212707] request_suspend_state: wakeup (0->0) at 36208495776 (2014-07-02 09:30:52.845520250 UTC)
- <3>[ 36.214965] init: untracked pid 559 exited
- <6>[ 40.510162] request_suspend_state: wakeup (0->0) at 40505950609 (2014-07-02 09:30:57.142975083 UTC)
- <3>[ 40.511322] init: untracked pid 596 exited
- <6>[ 45.850280] request_suspend_state: wakeup (0->0) at 45846069018 (2014-07-02 09:31:02.483093492 UTC)
- <6>[ 49.442169] adb_release
- <6>[ 49.449523] adb_open
- <6>[ 49.449768] mtp_bind_config
- <6>[ 49.449981] adb_bind_config
- <6>[ 49.635284] android_work: sent uevent USB_STATE=DISCONNECTED
- <6>[ 49.700622] android_work: sent uevent USB_STATE=CONNECTED
- <6>[ 49.706054] android_work: sent uevent USB_STATE=DISCONNECTED
- <6>[ 49.783752] android_work: sent uevent USB_STATE=CONNECTED
- <6>[ 49.791015] android_usb gadget: high speed config #1: android
- <6>[ 49.791503] android_work: sent uevent USB_STATE=CONFIGURED
- <6>[ 50.785308] request_suspend_state: wakeup (0->0) at 50781066576 (2014-07-02 09:31:07.418091050 UTC)
- <3>[ 50.787841] init: untracked pid 683 exited
- <6>[ 54.239257] max17040 4-0036: online = 1 vcell = 4073750 soc = 80 status = 1 health = 1 temp = 240 charger status = 0
- <6>[ 56.144775] request_suspend_state: wakeup (0->0) at 56140533129 (2014-07-02 09:31:12.777557603 UTC)
- <3>[ 56.145996] init: untracked pid 733 exited
- <6>[ 60.523620] request_suspend_state: wakeup (0->0) at 60519408862 (2014-07-02 09:31:17.156433336 UTC)
- <3>[ 60.524719] init: untracked pid 775 exited
- <6>[ 65.880187] request_suspend_state: wakeup (0->0) at 65875945727 (2014-07-02 09:31:22.512970201 UTC)
- <3>[ 65.881469] init: untracked pid 815 exited
- [B]<6>[ 66.322906] PVR: PVRCore_Init
- <6>[ 66.323242] PVR: LinuxMMInit: Maximum page pool size: 10800
- <6>[ 66.323516] PVR: PVRSRVDriverProbe(pDevice=c78b2800)
- <6>[ 66.323760] PVR: SGX register base: 0x56000000
- <6>[ 66.323822] PVR: SGX register size: 65535
- <6>[ 66.323944] PVR: SGX IRQ: 53
- <6>[ 66.324218] PVR: EnableSystemClocks: Enabling System Clocks
- <6>[ 66.324768] PVR: PVRCore_Init: major device 246[/B]
- <6>[ 66.348114] sr_class1p5_calib_work: core: Calibration complete: Voltage:Nominal=1250000,Calib=1038160,margin=13000
Add Comment
Please, Sign In to add comment