Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 6.2 2013-04-20 r3812 [x86_64-linux-3.11.0-12-generic] (local build)
- Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Toshiba 2.5" HDD MQ01ABD...
- Device Model: TOSHIBA MQ01ABD050
- Serial Number: 23F7SYDJS
- LU WWN Device Id: 5 000039 495904e9a
- Firmware Version: AX002J
- User Capacity: 500,107,862,016 bytes [500 GB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5400 rpm
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS (minor revision not indicated)
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Mon Aug 25 23:57:31 2014 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 120) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 115) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
- 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
- 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1076
- 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 1167
- 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
- 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
- 9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 4209
- 10 Spin_Retry_Count 0x0033 123 100 030 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1105
- 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 601
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 11
- 193 Load_Cycle_Count 0x0032 095 095 000 Old_age Always - 50750
- 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 30 (Min/Max 9/46)
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 64
- 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
- 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 0
- 222 Loaded_Hours 0x0032 094 094 000 Old_age Always - 2629
- 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
- 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
- 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 258
- 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
- SMART Error Log Version: 1
- ATA Error Count: 13382 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 13382 occurred at disk power-on lifetime: 4188 hours (174 days + 12 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 41 00 78 f8 59 40 Error: UNC at LBA = 0x0059f878 = 5896312
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 08 00 78 f8 59 40 00 00:13:01.084 READ FPDMA QUEUED
- 60 48 28 50 52 54 40 00 00:13:01.062 READ FPDMA QUEUED
- 60 10 20 38 52 54 40 00 00:13:01.062 READ FPDMA QUEUED
- 60 08 18 28 52 54 40 00 00:13:01.062 READ FPDMA QUEUED
- 60 10 10 08 52 54 40 00 00:13:01.062 READ FPDMA QUEUED
- Error 13381 occurred at disk power-on lifetime: 4188 hours (174 days + 12 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 41 08 78 f8 59 40 Error: UNC at LBA = 0x0059f878 = 5896312
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 08 08 78 f8 59 40 00 00:12:57.284 READ FPDMA QUEUED
- 60 00 00 20 f9 59 40 00 00:12:57.284 READ FPDMA QUEUED
- ef 10 02 00 00 00 a0 00 00:12:57.283 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 e0 00 00:12:57.283 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- ec 00 00 00 00 00 a0 00 00:12:57.282 IDENTIFY DEVICE
- Error 13380 occurred at disk power-on lifetime: 4188 hours (174 days + 12 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 41 10 78 f8 59 40 Error: WP at LBA = 0x0059f878 = 5896312
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 08 00 00 60 8b 40 00 00:12:53.462 WRITE FPDMA QUEUED
- 61 08 18 00 60 8b 40 00 00:12:53.461 WRITE FPDMA QUEUED
- 60 08 10 78 f8 59 40 00 00:12:53.461 READ FPDMA QUEUED
- 60 00 08 20 f9 59 40 00 00:12:53.461 READ FPDMA QUEUED
- 61 08 00 00 60 8f 40 00 00:12:53.461 WRITE FPDMA QUEUED
- Error 13379 occurred at disk power-on lifetime: 4188 hours (174 days + 12 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 41 00 78 f8 59 40 Error: WP at LBA = 0x0059f878 = 5896312
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 c0 08 98 b3 8f 40 00 00:12:53.386 WRITE FPDMA QUEUED
- 60 00 00 20 f7 59 40 00 00:12:49.681 READ FPDMA QUEUED
- 60 00 00 20 f6 59 40 00 00:12:49.664 READ FPDMA QUEUED
- 60 00 00 38 55 50 40 00 00:12:49.663 READ FPDMA QUEUED
- 60 00 08 38 54 50 40 00 00:12:49.662 READ FPDMA QUEUED
- Error 13378 occurred at disk power-on lifetime: 4188 hours (174 days + 12 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 41 d0 d8 cf 32 40 Error: WP at LBA = 0x0032cfd8 = 3330008
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 08 e8 00 cc 7c 40 00 00:17:30.867 WRITE FPDMA QUEUED
- 60 08 e0 30 29 82 40 00 00:17:27.093 READ FPDMA QUEUED
- 60 40 d8 82 17 64 40 00 00:17:27.059 READ FPDMA QUEUED
- 60 08 a0 c2 19 64 40 00 00:17:27.059 READ FPDMA QUEUED
- 60 20 88 44 1c 64 40 00 00:17:27.058 READ FPDMA QUEUED
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement