Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root@Pineapple:~# [ 8.800000] hub 1-0:1.0: USB hub found
- ash: missing ]
- root@Pineapple:~# [ 8.800000] hub 1-0:1.0: 1 port detected
- [ 9.850000] usb 1-1: new high-speed USB device number 3 using ehci-platform
- [ 9.970000] usb 1-1: device descriptor read/64, error -32
- ash: missing ]
- root@Pineapple:~# [ 8.910000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 9.040000] uhci_hcd: USB Universal Host Controller Interface driver
- ash: missing ]
- root@Pineapple:~# [ 9.160000] Initializing USB Mass Storage driver...
- ash: missing ]
- root@Pineapple:~# [ 9.160000] usbcore: registered new interface driver usb-storage
- ash: missing ]
- root@Pineapple:~# [ 9.170000] USB Mass Storage support registered.
- ash: missing ]
- root@Pineapple:~# [ 9.270000] usb 1-1: new high-speed USB device number 2 using ehci-platform
- ash: missing ]
- root@Pineapple:~# [ 9.390000] usb 1-1: device descriptor read/64, error -32
- ash: missing ]
- root@Pineapple:~# [ 9.620000] usb 1-1: device descriptor read/64, error -32
- ash: missing ]
- root@Pineapple:~# [ 9.850000] usb 1-1: new high-speed USB device number 3 using ehci-platform
- ash: missing ]
- root@Pineapple:~# [ 9.970000] usb 1-1: device descriptor read/64, error -32
- ash: missing ]
- root@Pineapple:~# [ 10.200000] usb 1-1: device descriptor read/64, error -32
- ash: missing ]
- [ 12.720000] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 12.740000] sda: sda1 sda2
- [ 12.750000] sd 0:0:0:0: [sda] No Caching mode page present
- root@Pineapple:~# [ 10.430000] usb 1-1: new high-speed USB device number 4 using ehci-platform
- ash: missing ]
- root@Pineapple:~# [ 10.460000] hub 1-1:1.0: USB hub found
- ash: missing ]
- root@Pineapple:~# [ 10.460000] hub 1-1:1.0: 4 ports detected
- ash: missing ]
- root@Pineapple:~# [ 10.740000] usb 1-1.1: new high-speed USB device number 5 using ehci-platform
- ash: missing ]
- root@Pineapple:~# [ 10.980000] usb 1-1.4: new high-speed USB device number 6 using ehci-platform
- ash: missing ]
- root@Pineapple:~# [ 11.110000] scsi0 : usb-storage 1-1.4:1.0
- ash: missing ]
- root@Pineapple:~# [ 12.110000] scsi 0:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0
- ash: missing ]
- root@Pineapple:~# [ 12.690000] sd 0:0:0:0: [sda] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 12.700000] sd 0:0:0:0: [sda] Write Protect is off
- ash: missing ]
- root@Pineapple:~# [ 12.700000] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
- ash: missing ]
- root@Pineapple:~# [ 12.700000] sd 0:0:0:0: [sda] No Caching mode page present
- ash: missing ]
- root@Pineapple:~# [ 12.710000] sd 0:0:0:0: [sda] Assuming drive cache: write through
- ash: missing ]
- root@Pineapple:~# [ 12.720000] sd 0:0:0:0: [sda] No Caching mode page present
- ash: missing ]
- root@Pineapple:~# [ 12.720000] sd 0:0:0:0: [sda] Assuming drive cache: write through
- ash: missing ]
- root@Pineapple:~# [ 12.740000] sda: sda1 sda2
- ash: missing ]
- root@Pineapple:~# [ 12.750000] sd 0:0:0:0: [sda] No Caching mode page present
- ash: missing ]
- [ 33.380000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 33.390000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- root@Pineapple:~# [ 12.750000] sd 0:0:0:0: [sda] Assuming drive cache: write through
- ash: missing ]
- root@Pineapple:~# [ 12.760000] sd 0:0:0:0: [sda] Attached SCSI removable disk
- ash: missing ]
- root@Pineapple:~# [ 16.960000] usb 1-1.2: new high-speed USB device number 7 using ehci-platform
- ash: missing ]
- root@Pineapple:~# [ 17.340000] scsi1 : usb-storage 1-1.2:1.0
- ash: missing ]
- root@Pineapple:~# [ 17.340000] scsi2 : usb-storage 1-1.2:1.1
- ash: missing ]
- root@Pineapple:~# [ 19.870000] scsi 1:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
- ash: missing ]
- root@Pineapple:~# [ 19.880000] scsi 2:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
- ash: missing ]
- root@Pineapple:~# [ 19.900000] sd 2:0:0:0: [sdb] Attached SCSI removable disk
- ash: missing ]
- root@Pineapple:~# [ 33.220000] Loading modules backported from Linux version master-2014-01-23-0-g62c147d
- ash: missing ]
- root@Pineapple:~# [ 33.230000] Backport generated by backports.git backports-20140124-0-g1256d3e
- ash: missing ]
- root@Pineapple:~# [ 33.340000] cfg80211: Calling CRDA to update world regulatory domain
- ash: missing ]
- root@Pineapple:~# [ 33.350000] cfg80211: World regulatory domain updated:
- ash: missing ]
- root@Pineapple:~# [ 33.350000] cfg80211: DFS Master region: unset
- ash: missing ]
- root@Pineapple:~# [ 33.360000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 33.370000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 33.370000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 33.380000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 33.390000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- [ 35.520000] Button Hotplug driver version 0.4.1
- -ash[ 35.730000] RPC: Registered named UNIX socket transport module.
- : syntax error: [ 35.740000] RPC: Registered udp transport module.
- [ 35.740000] RPC: Registered tcp transport module.
- [ 35.750000] RPC: Registered tcp NFSv4.1 backchannel transport module.
- unexpected "("
- [ 36.070000] PPP generic driver version 2.4.2
- root@Pineapple:~# [ 33.400000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 33.400000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 34.950000] usbcore: registered new interface driver rt73usb
- ash: missing ]
- root@Pineapple:~# [ 35.000000] ath: EEPROM regdomain: 0x0
- ash: missing ]
- root@Pineapple:~# [ 35.000000] ath: EEPROM indicates default country code should be used
- ash: missing ]
- root@Pineapple:~# [ 35.000000] ath: doing EEPROM country->regdmn map search
- ash: missing ]
- root@Pineapple:~# [ 35.000000] ath: country maps to regdmn code: 0x3a
- ash: missing ]
- root@Pineapple:~# [ 35.000000] ath: Country alpha2 being used: US
- ash: missing ]
- root@Pineapple:~# [ 35.000000] ath: Regpair used: 0x3a
- ash: missing ]
- root@Pineapple:~# [ 35.020000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- ash: missing ]
- root@Pineapple:~# [ 35.020000] Registered led device: ath9k-phy0
- ash: missing ]
- root@Pineapple:~# [ 35.020000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
- ash: missing ]
- root@Pineapple:~# [ 35.030000] cfg80211: Calling CRDA for country: US
- ash: missing ]
- root@Pineapple:~# [ 35.030000] cfg80211: Regulatory domain changed to country: US
- [ 39.160000] sd 2:0:0:0: Attached scsi generic sg2 type 0
- ash: missing ]
- root@Pineapple:~# [ 35.040000] cfg80211: DFS Master region: FCC
- ash: missing ]
- root@Pineapple:~# [ 35.040000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 35.050000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 35.060000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 1700 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 35.060000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2400 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 35.070000] cfg80211: (5490000 KHz - 5600000 KHz @ 80000 KHz), (300 mBi, 2400 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 35.080000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2400 mBm)
- -ash[ 39.230000] pl2303: Prolific PL2303 USB to serial adaptor driver
- [ 45.720000] usb 1-1.2: USB disconnect, device number 7
- : syntax error: unexpected "("
- root@Pineapple:~# [ 35.090000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 3000 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 35.090000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 35.390000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
- ash: missing ]
- root@Pineapple:~# [ 35.390000] ieee80211 phy1: hwaddr 00:13:37:93:59:99, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 35.420000] rtl8187: Customer ID is 0x46
- ash: missing ]
- root@Pineapple:~# [ 35.420000] Registered led device: rtl8187-phy1::radio
- ash: missing ]
- root@Pineapple:~# [ 35.420000] Registered led device: rtl8187-phy1::tx
- [ 47.620000] device eth0 entered promiscuous mode
- ash: missing ]
- [ 51.780000] usb 1-1.2: new high-speed USB device number 8 using ehci-platform
- [ 52.300000] option 1-1.2:1.0: GSM modem (1-port) converter detected
- [ 52.300000] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB0
- [ 52.310000] option 1-1.2:1.1: GSM modem (1-port) converter detected
- root@Pineapple:~# [ 35.420000] Registered led device: rtl8187-phy1::rx
- ash: missing ]
- root@Pineapple:~# [ 35.430000] rtl8187: wireless switch is on
- ash: missing ]
- root@Pineapple:~# [ 35.430000] usbcore: registered new interface driver rtl8187
- ash: missing ]
- [ 52.320000] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB1
- [ 52.320000] option 1-1.2:1.2: GSM modem (1-port) converter detected
- [ 52.330000] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB2
- [ 52.350000] scsi3 : usb-storage 1-1.2:1.3
- [ 52.350000] scsi4 : usb-storage 1-1.2:1.4
- root@Pineapple:~# [ 35.520000] Button Hotplug driver version 0.4.1
- ash: missing ]
- root@Pineapple:~# [ 35.730000] RPC: Registered named UNIX socket transport module.
- ash: missing ]
- root@Pineapple:~# [ 35.740000] RPC: Registered udp transport module.
- ash: missing ]
- root@Pineapple:~# [ 35.740000] RPC: Registered tcp transport module.
- ash: missing ]
- root@Pineapple:~# [ 35.750000] RPC: Registered tcp NFSv4.1 backchannel transport module.
- ash: missing ]
- root@Pineapple:~# [ 36.070000] PPP generic driver version 2.4.2
- ash: missing ]
- root@Pineapple:~# [ 36.110000] usbcore: registered new interface driver rt2800usb
- ash: missing ]
- root@Pineapple:~# [ 36.240000] tun: Universal TUN/TAP device driver, 1.6
- ash: missing ]
- root@Pineapple:~# [ 36.240000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 36.590000] ip_tables: (C) 2000-2006 Netfilter Core Team
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 36.820000] NET: Registered protocol family 24
- ash: missing ]
- root@Pineapple:~# [ 36.960000] nf_conntrack version 0.5.0 (965 buckets, 3860 max)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 37.670000] xt_time: kernel timezone is -0000
- ash: missing ]
- root@Pineapple:~# [ 38.200000] usbcore: registered new interface driver ath9k_htc
- ash: missing ]
- root@Pineapple:~# [ 38.240000] usbcore: registered new interface driver cdc_acm
- ash: missing ]
- root@Pineapple:~# [ 38.240000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- ash: missing ]
- root@Pineapple:~# [ 38.470000] usbcore: registered new interface driver usbserial
- ash: missing ]
- root@Pineapple:~# [ 38.470000] USB Serial support registered for generic
- ash: missing ]
- root@Pineapple:~# [ 38.480000] usbcore: registered new interface driver usbserial_generic
- ash: missing ]
- root@Pineapple:~# [ 38.480000] usbserial: USB Serial Driver core
- ash: missing ]
- root@Pineapple:~# [ 38.620000] usbcore: registered new interface driver asix
- ash: missing ]
- root@Pineapple:~# [ 38.700000] usbcore: registered new interface driver cdc_ether
- ash: missing ]
- root@Pineapple:~# [ 38.940000] Error: Driver 'gpio-keys-polled' is already registered, aborting...
- ash: missing ]
- root@Pineapple:~# [ 39.040000] usbcore: registered new interface driver rndis_host
- ash: missing ]
- root@Pineapple:~# [ 39.160000] sd 0:0:0:0: Attached scsi generic sg0 type 0
- ash: missing ]
- root@Pineapple:~# [ 39.160000] scsi 1:0:0:0: Attached scsi generic sg1 type 5
- ash: missing ]
- root@Pineapple:~# [ 39.160000] sd 2:0:0:0: Attached scsi generic sg2 type 0
- ash: missing ]
- root@Pineapple:~# [ 39.190000] USB Serial support registered for GSM modem (1-port)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 39.200000] usbcore: registered new interface driver option
- ash: missing ]
- root@Pineapple:~# [ 39.200000] option: v0.7.2:USB Driver for GSM modems
- ash: missing ]
- root@Pineapple:~# [ 39.220000] USB Serial support registered for pl2303
- ash: missing ]
- root@Pineapple:~# [ 39.230000] usbcore: registered new interface driver pl2303
- ash: missing ]
- root@Pineapple:~# [ 39.230000] pl2303: Prolific PL2303 USB to serial adaptor driver
- ash: missing ]
- root@Pineapple:~# [ 45.720000] usb 1-1.2: USB disconnect, device number 7
- ash: missing ]
- root@Pineapple:~# [ 47.620000] device eth0 entered promiscuous mode
- ash: missing ]
- root@Pineapple:~# [ 51.780000] usb 1-1.2: new high-speed USB device number 8 using ehci-platform
- ash: missing ]
- root@Pineapple:~# [ 52.300000] option 1-1.2:1.0: GSM modem (1-port) converter detected
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 52.300000] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB0
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 52.310000] option 1-1.2:1.1: GSM modem (1-port) converter detected
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 52.320000] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB1
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 52.320000] option 1-1.2:1.2: GSM modem (1-port) converter detected
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 52.330000] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB2
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 52.350000] scsi3 : usb-storage 1-1.2:1.3
- ash: missing ]
- root@Pineapple:~# [ 52.350000] scsi4 : usb-storage 1-1.2:1.4
- ash: missing ]
- root@Pineapple:~# [ 53.570000] device wlan0 entered promiscuous mode
- ash: missing ]
- root@Pineapple:~# [ 53.630000] br-lan: port 2(wlan0) entered forwarding state
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 53.640000] br-lan: port 2(wlan0) entered forwarding state
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 54.880000] scsi 3:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
- ash: missing ]
- root@Pineapple:~# [ 54.890000] scsi 3:0:0:0: Attached scsi generic sg1 type 5
- ash: missing ]
- root@Pineapple:~# [ 54.900000] scsi 4:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
- ash: missing ]
- root@Pineapple:~# [ 54.900000] sd 4:0:0:0: Attached scsi generic sg2 type 0
- ash: missing ]
- root@Pineapple:~# [ 54.920000] sd 4:0:0:0: [sdb] Attached SCSI removable disk
- ash: missing ]
- root@Pineapple:~# [ 55.640000] br-lan: port 2(wlan0) entered forwarding state
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 67.100000] wlan1: authenticate with 14:5b:d1:2f:41:9b
- ash: missing ]
- root@Pineapple:~# [ 68.450000] wlan1: send auth to 14:5b:d1:2f:41:9b (try 1/3)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 68.460000] wlan1: authenticated
- ash: missing ]
- root@Pineapple:~# [ 68.520000] wlan1: associate with 14:5b:d1:2f:41:9b (try 1/3)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 68.530000] wlan1: RX AssocResp from 14:5b:d1:2f:41:9b (capab=0x411 status=0 aid=1)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 68.540000] wlan1: associated
- ash: missing ]
- root@Pineapple:~# [ 81.450000] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 81.460000] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 81.500000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 82.460000] Adding 1004024k swap on /dev/sda2. Priority:-1 extents:1 across:1004024k
- ash: missing ]
- root@Pineapple:~# 2(wlan0) entered forwarding state
- -ash: syntax error: unexpected word (expecting ")")
- root@Pineapple:~# -ash: syntax error: unexpected "("
- -ash: -ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 53.640000] br-lan: port 2(wlan0) entered forwarding state
- -ash: syntax error: unexpected "("
- root@Pineapple:~# -ash: syntax error: unexpected "("
- -ash: -ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 54.8
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# ash: missing ]
- root@Pineapple:~# [ 54.900000] scsi 4:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ
- : 0 ANSI: 2
- -ash: ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 54.890000] scsi 3:0:0:0: Attached scsi generic sg1 type 5
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# ash: missing ]
- -ash: ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 54.900000] scsi 4:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# : 0 ANSI: 2
- root@Pineapple:~# ash: missing ]
- -ash: ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 54.900000] sd 4:0:0:0: Attached scsi generic sg2 type 0
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# ash: missing ]
- -ash: ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 54
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# ash: missing ]
- -ash: ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 55.640000] br-lan: port 2(wlan0) entered forwarding state
- -ash: syntax error: unexpected "("
- root@Pineapple:~# -ash: syntax error: unexpected "("
- -ash: -ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 67.100000] wlan1: authenticate with 14:5b:d1:2f:41:9b
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# ash: missing ]
- -ash: ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 68.450000] wlan1: send auth to 14:5b:d1:2f:41:9b (try 1/3)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# -ash: syntax error: unexpected "("
- -ash: -ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 68.460000] wlan1: authenticated
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# ash: missing ]
- -ash: ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 68.520000] wlan1: associate with 14:5b:d1:2f:41:9b (try 1/3)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# -ash: syntax error: unexpected "("
- -ash: -ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 68.530000] wlan1: RX AssocResp from 14:5b:d1:2f:41:9b (capab=0x411 status=0
- -ash: syntax error: unexpected "("
- root@Pineapple:~# -ash: syntax error: unexpected "("
- -ash: -ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 68.540000] wlan1: associated
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# ash: missing ]
- -ash: ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 81.450000] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibi
- -ash: syntax error: unexpected "("
- root@Pineapple:~#
- root@Pineapple:~# -ash: syntax error: unexpected "("
- -ash: -ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 81.460000] EXT4-fs (sda1): couldn't mou
- -ash: syntax error: unexpected "("
- root@Pineapple:~# -ash: syntax error: unexpected "("
- -ash: -ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 81.500000] EXT4-fs (sda1): mounted filesystem with or
- -ash: syntax error: unexpected "("
- root@Pineapple:~# -ash: syntax error: unexpected "("
- -ash: -ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 82.460000] Adding 1004024k swap on /dev/sda2. Pri
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# ash: missing ]
- -ash: ash:: not found
- root@Pineapple:~# root@Pineapple:~# root@Pineapple:~#
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# -ash: root@Pineapple:~#: not found
- -ash: -ash:: not found
- root@Pineapple:~# root@Pineapple:~# clr
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# -ash: clr: not found
- -ash: -ash:: not found
- root@Pineapple:~# root@Pineapple:~# clear
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# root@Pineapple:~# dmesg
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# [ 0.000000] Linux version 3.3.8 (sebkinne@buildtop) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC
- 4.6-2012.02) ) #81 Mon Aug 3 19:40:39 PDT 2015
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.000000] MyLoader: sysp=97d936c9, boardp=61b798de, parts=6238a85e
- [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
- ash: missing ]
- [ 0.000000] Determined physical RAM map:
- root@Pineapple:~# [ 0.000000] bootconsole [early0] enabled
- ash: missing ]
- root@Pineapple:~# [ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.000000] SoC: Atheros AR9330 rev 1
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Determined physical RAM map:
- ash: missing ]
- root@Pineapple:~# [ 0.000000] memory: 04000000 @ 00000000 (usable)
- -ash[ 0.000000] Kernel command line: board=MK5 console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
- : syntax error: unexpected "("
- root@Pineapple:~# [ 0.000000] Initrd not found or empty - disabling initrd
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Zone PFN ranges:
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Normal 0x00000000 -> 0x00004000
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Movable zone start PFN for each node
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Early memory PFN ranges
- ash: missing ]
- root@Pineapple:~# [ 0.000000] 0: 0x00000000 -> 0x00004000
- ash: missing ]
- root@Pineapple:~# [ 0.000000] On node 0 totalpages: 16384
- ash: missing ]
- root@Pineapple:~# [ 0.000000] free_area_init_node: node 0, pgdat 802d8470, node_mem_map 81000000
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Normal zone: 128 pages used for memmap
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Normal zone: 0 pages reserved
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Normal zone: 16256 pages, LIFO batch:3
- ash: missing ]
- root@Pineapple:~# [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- ash: missing ]
- root@Pineapple:~# [ 0.000000] pcpu-alloc: [0] 0
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Kernel command line: board=MK5 console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
- ash: missing ]
- root@Pineapple:~# [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Writing ErrCtl register=00000000
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Readback ErrCtl register=00000000
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Memory: 61592k/65536k available (2124k kernel code, 3944k reserved, 406k data, 212k init, 0k
- highmem)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- ash: missing ]
- root@Pineapple:~# [ 0.000000] NR_IRQS:51
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.080000] pid_max: default: 32768 minimum: 301
- ash: missing ]
- root@Pineapple:~# [ 0.080000] Mount-cache hash table entries: 512
- ash: missing ]
- root@Pineapple:~# [ 0.090000] NET: Registered protocol family 16
- ash: missing ]
- root@Pineapple:~# [ 0.090000] gpiochip_add: registered GPIOs 0 to 29 on device: ath79
- ash: missing ]
- root@Pineapple:~# [ 0.100000] MIPS: machine is MK5 V1.0
- ash: missing ]
- root@Pineapple:~# [ 0.350000] bio: create slab <bio-0> at 0
- -ash: can't open bio-0: no such file
- root@Pineapple:~# [ 0.360000] Switching to clocksource MIPS
- ash: missing ]
- root@Pineapple:~# [ 0.360000] NET: Registered protocol family 2
- ash: missing ]
- root@Pineapple:~# [ 0.370000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.370000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.370000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.380000] TCP: Hash tables configured (established 2048 bind 2048)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.390000] TCP reno registered
- ash: missing ]
- root@Pineapple:~# [ 0.390000] UDP hash table entries: 256 (order: 0, 4096 bytes)
- -ash: [ 0.510000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
- [ 0.520000] 0x000000102758-0x000000ff0000 : "rootfs"
- [ 0.530000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
- [ 0.540000] mtd: partition "rootfs" set to be root filesystem
- syntax error: unexpected "("
- root@Pineapple:~# [ 0.400000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.400000] NET: Registered protocol family 1
- ash: missing ]
- root@Pineapple:~# [ 0.410000] PCI: CLS 0 bytes, default 32
- ash: missing ]
- root@Pineapple:~# [ 0.430000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.430000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, In
- c.
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.440000] msgmni has been set to 120
- ash: missing ]
- root@Pineapple:~# [ 0.440000] io scheduler noop registered
- ash: missing ]
- root@Pineapple:~# [ 0.450000] io scheduler deadline registered (default)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.450000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
- ash: missing ]
- root@Pineapple:~# [ 0.460000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.470000] console [ttyATH0] enabled, bootconsole disabled
- ash: missing ]
- root@Pineapple:~# [ 0.480000] m25p80 spi0.0: found w25q128, expected m25p80
- ash: missing ]
- root@Pineapple:~# [ 0.480000] m25p80 spi0.0: w25q128 (16384 Kbytes)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.490000] 5 tp-link partitions found on MTD device spi0.0
- ash: missing ]
- root@Pineapple:~# [ 0.490000] Creating 5 MTD partitions on "spi0.0":
- ash: missing ]
- root@Pineapple:~# [ 0.500000] 0x000000000000-0x000000020000 : "u-boot"
- ash: missing ]
- root@Pineapple:~# [ 0.510000] 0x000000020000-0x000000102758 : "kernel"
- ash: missing ]
- root@Pineapple:~# [ 0.510000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than
- an erase block -- forcing read-only
- ash: missing ]
- root@Pineapple:~# [ 0.520000] 0x000000102758-0x000000ff0000 : "rootfs"
- ash: missing ]
- root@Pineapple:~# [ 0.530000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than
- an erase block -- forcing read-only
- ash: missing ]
- root@Pineapple:~# [ 0.540000] mtd: partition "rootfs" set to be root filesystem
- ash: missing ]
- root@Pineapple:~# [ 0.550000] mtd: partition "rootfs_data" created automatically, ofs=CD0000, len=320000
- ash: missing ]
- root@Pineapple:~# [ 0.550000] 0x000000cd0000-0x000000ff0000 : "rootfs_data"
- ash: missing ]
- root@Pineapple:~# [ 0.560000] 0x000000ff0000-0x000001000000 : "art"
- ash: missing ]
- root@Pineapple:~# [ 0.570000] 0x000000020000-0x000000ff0000 : "firmware"
- ash: missing ]
- root@Pineapple:~# [ 0.590000] ag71xx_mdio: probed
- ash: missing ]
- root@Pineapple:~# [ 0.590000] eth0: Atheros AG71xx at 0xb9000000, irq 4
- ash: missing ]
- root@Pineapple:~# [ 1.150000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PH
- Y]
- ash: missing ]
- root@Pineapple:~# [ 1.160000] TCP cubic registered
- ash: missing ]
- root@Pineapple:~# [ 1.160000] NET: Registered protocol family 17
- [ 9.160000] Initializing USB Mass Storage driver...
- [ 9.160000] usbcore: registered new interface driver usb-storage
- [ 9.170000] USB Mass Storage support registered.
- [ 9.270000] usb 1-1: new high-speed USB device number 2 using ehci-platform
- [ 9.390000] usb 1-1: device descriptor read/64, error -32
- [ 9.620000] usb 1-1: device descriptor read/64, error -32
- [ 9.850000] usb 1-1: new high-speed USB device number 3 using ehci-platform
- [ 9.970000] usb 1-1: device descriptor read/64, error -32
- ash: missing ]
- root@Pineapple:~# [ 1.160000] Bridge firewalling registered
- ash: missing ]
- root@Pineapple:~# [ 1.170000] 8021q: 802.1Q VLAN Support v1.8
- ash: missing ]
- root@Pineapple:~# [ 1.180000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
- -ash: syntax error: unexpected "("
- [ 10.200000] usb 1-1: device descriptor read/64, error -32
- [ 10.430000] usb 1-1: new high-speed USB device number 4 using ehci-platform
- root@Pineapple:~# [ 1.190000] Freeing unused kernel memory: 212k freed
- ash: missing ]
- root@Pineapple:~# [ 3.580000] Registered led device: mk5:red:wlan1
- ash: missing ]
- root@Pineapple:~# [ 3.580000] Registered led device: mk5:blue:wlan0
- ash: missing ]
- root@Pineapple:~# [ 3.580000] Registered led device: mk5:amber:lan
- ash: missing ]
- root@Pineapple:~# [ 6.910000] JFFS2 notice: (421) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xda
- tum (1 unchecked, 0 orphan) and 16 of xref (0 dead, 1 orphan) found.
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 7.870000] SCSI subsystem initialized
- ash: missing ]
- root@Pineapple:~# [ 8.170000] usbcore: registered new interface driver usbfs
- ash: missing ]
- root@Pineapple:~# [ 8.170000] usbcore: registered new interface driver hub
- ash: missing ]
- root@Pineapple:~# [ 8.180000] usbcore: registered new device driver usb
- ash: missing ]
- root@Pineapple:~# [ 8.730000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 8.730000] ehci-platform ehci-platform: Generic Platform EHCI Controller
- ash: missing ]
- root@Pineapple:~# [ 8.740000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
- ash: missing ]
- root@Pineapple:~# [ 8.780000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
- ash: missing ]
- root@Pineapple:~# [ 8.800000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
- ash: missing ]
- root@Pineapple:~# [ 8.800000] hub 1-0:1.0: USB hub found
- ash: missing ]
- root@Pineapple:~# [ 8.800000] hub 1-0:1.0: 1 port detected
- ash: missing ]
- root@Pineapple:~# [ 8.910000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 9.040000] uhci_hcd: USB Universal Host Controller Interface driver
- ash: missing ]
- root@Pineapple:~# [ 9.160000] Initializing USB Mass Storage driver...
- ash: missing ]
- root@Pineapple:~# [ 9.160000] usbcore: registered new interface driver usb-storage
- ash: missing ]
- root@Pineapple:~# [ 9.170000] USB Mass Storage support registered.
- ash: missing ]
- root@Pineapple:~# [ 9.270000] usb 1-1: new high-speed USB device number 2 using ehci-platform
- ash: missing ]
- root@Pineapple:~# [ 9.390000] usb 1-1: device descriptor read/64, error -32
- ash: missing ]
- root@Pineapple:~# [ 9.620000] usb 1-1: device descriptor read/64, error -32
- ash: missing ]
- root@Pineapple:~# [ 9.850000] usb 1-1: new high-speed USB device number 3 using ehci-platform
- ash: missing ]
- root@Pineapple:~# [ 9.970000] usb 1-1: device descriptor read/64, error -32
- ash: missing ]
- root@Pineapple:~# [ 10.200000] usb 1-1: device descriptor read/64, error -32
- ash: missing ]
- root@Pineapple:~# [ 10.430000] usb 1-1: new high-speed USB device number 4 using ehci-platform
- ash: missing ]
- root@Pineapple:~# [ 10.460000] hub 1-1:1.0: USB hub found
- ash: missing ]
- root@Pineapple:~# [ 10.460000] hub 1-1:1.0: 4 ports detected
- ash: missing ]
- root@Pineapple:~# [ 10.740000] usb 1-1.1: new high-speed USB device number 5 using ehci-platform
- ash: missing ]
- root@Pineapple:~# [ 10.980000] usb 1-1.4: new high-speed USB device number 6 using ehci-platform
- ash: missing ]
- root@Pineapple:~# [ 11.110000] scsi0 : usb-storage 1-1.4:1.0
- ash: missing ]
- root@Pineapple:~# [ 12.110000] scsi 0:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0
- ash: missing ]
- root@Pineapple:~# [ 12.690000] sd 0:0:0:0: [sda] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 12.700000] sd 0:0:0:0: [sda] Write Protect is off
- ash: missing ]
- root@Pineapple:~# [ 12.700000] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
- ash: missing ]
- root@Pineapple:~# [ 12.700000] sd 0:0:0:0: [sda] No Caching mode page present
- ash: missing ]
- root@Pineapple:~# [ 12.710000] sd 0:0:0:0: [sda] Assuming drive cache: write through
- ash: missing ]
- root@Pineapple:~# [ 12.720000] sd 0:0:0:0: [sda] No Caching mode page present
- ash: missing ]
- root@Pineapple:~# [ 12.720000] sd 0:0:0:0: [sda] Assuming drive cache: write through
- ash: missing ]
- root@Pineapple:~# [ 12.740000] sda: sda1 sda2
- ash: missing ]
- root@Pineapple:~# [ 12.750000] sd 0:0:0:0: [sda] No Caching mode page present
- ash: missing ]
- root@Pineapple:~# [ 12.750000] sd 0:0:0:0: [sda] Assuming drive cache: write through
- ash: missing ]
- root@Pineapple:~# [ 12.760000] sd 0:0:0:0: [sda] Attached SCSI removable disk
- ash: missing ]
- root@Pineapple:~# [ 16.960000] usb 1-1.2: new high-speed USB device number 7 using ehci-platform
- ash: missing ]
- root@Pineapple:~# [ 17.340000] scsi1 : usb-storage 1-1.2:1.0
- ash: missing ]
- root@Pineapple:~# [ 17.340000] scsi2 : usb-storage 1-1.2:1.1
- ash: missing ]
- root@Pineapple:~# [ 19.870000] scsi 1:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
- ash: missing ]
- root@Pineapple:~# [ 19.880000] scsi 2:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
- ash: missing ]
- root@Pineapple:~# [ 19.900000] sd 2:0:0:0: [sdb] Attached SCSI removable disk
- ash: missing ]
- root@Pineapple:~# [ 33.220000] Loading modules backported from Linux version master-2014-01-23-0-g62c147d
- ash: missing ]
- root@Pineapple:~# [ 33.230000] Backport generated by backports.git backports-20140124-0-g1256d3e
- ash: missing ]
- root@Pineapple:~# 2(wlan0) entered forwarding state
- -ash: syntax error: unexpected word (expecting ")")
- root@Pineapple:~# -ash: syntax error: unexpected "("
- -ash: -ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 53.640000] br-lan: port 2(wlan0) entered forwarding state
- -ash: syntax error: unexpected "("
- root@Pineapple:~# -ash: syntax error: unexpected "("
- -ash: -ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 54.8
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# ash: missing ]
- -ash: ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 54.890000] scsi 3:0:0:0: Attached scsi generic sg1 type 5
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# ash: missing ]
- -ash: ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 54.900000] scsi 4:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# : 0 ANSI: 2
- root@Pineapple:~# ash: missing ]
- -ash: ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 54.900000] sd 4:0:0:0: Attached scsi generic sg2 type 0
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# ash: missing ]
- -ash: ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 54
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# ash: missing ]
- -ash: ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 55.640000] br-lan: port 2(wlan0) entered forwarding state
- -ash: syntax error: unexpected "("
- root@Pineapple:~# -ash: syntax error: unexpected "("
- -ash: -ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 67.100000] wlan1: authenticate with 14:5b:d1:2f:41:9b
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# ash: missing ]
- -ash: ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 68.450000] wlan1: send auth to 14:5b:d1:2f:41:9b (try 1/3)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# -ash: syntax error: unexpected "("
- -ash: -ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 68.460000] wlan1: authenticated
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# ash: missing ]
- -ash: ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 68.520000] wlan1: associate with 14:5b:d1:2f:41:9b (try 1/3)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# -ash: syntax error: unexpected "("
- -ash: -ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 68.530000] wlan1: RX AssocResp from 14:5b:d1:2f:41:9b (capab=0x411 status=0
- -ash: syntax error: unexpected "("
- root@Pineapple:~# -ash: syntax error: unexpected "("
- -ash: -ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 68.540000] wlan1: associated
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# ash: missing ]
- -ash: ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 81.450000] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibi
- -ash: syntax error: unexpected "("
- root@Pineapple:~#
- root@Pineapple:~# -ash: syntax error: unexpected "("
- -ash: -ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 81.460000] EXT4-fs (sda1): couldn't mou
- -ash: syntax error: unexpected "("
- root@Pineapple:~# -ash: syntax error: unexpected "("
- -ash: -ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 81.500000] EXT4-fs (sda1): mounted filesystem with or
- -ash: syntax error: unexpected "("
- root@Pineapple:~# -ash: syntax error: unexpected "("
- -ash: -ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 82.460000] Adding 1004024k swap on /dev/sda2. Pri
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# ash: missing ]
- -ash: ash:: not found
- root@Pineapple:~# root@Pineapple:~# root@Pineapple:~#
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# -ash: root@Pineapple:~#: not found
- -ash: -ash:: not found
- root@Pineapple:~# root@Pineapple:~# clr
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# -ash: clr: not found
- -ash: -ash:: not found
- root@Pineapple:~# root@Pineapple:~# clear
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# root@Pineapple:~# dmesg
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# [ 0.000000] Linux version 3.3.8 (sebkinne@buildtop) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC
- 4.6-2012.02) ) #81 Mon Aug 3 19:40:39 PDT 2015
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.000000] MyLoader: sysp=97d936c9, boardp=61b798de, parts=6238a85e
- ash: missing ]
- root@Pineapple:~# [ 0.000000] bootconsole [early0] enabled
- ash: missing ]
- root@Pineapple:~# [ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.000000] SoC: Atheros AR9330 rev 1
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Determined physical RAM map:
- ash: missing ]
- root@Pineapple:~# [ 0.000000] memory: 04000000 @ 00000000 (usable)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.000000] Initrd not found or empty - disabling initrd
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Zone PFN ranges:
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Normal 0x00000000 -> 0x00004000
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Movable zone start PFN for each node
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Early memory PFN ranges
- ash: missing ]
- root@Pineapple:~# [ 0.000000] 0: 0x00000000 -> 0x00004000
- ash: missing ]
- root@Pineapple:~# [ 0.000000] On node 0 totalpages: 16384
- ash: missing ]
- root@Pineapple:~# [ 0.000000] free_area_init_node: node 0, pgdat 802d8470, node_mem_map 81000000
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Normal zone: 128 pages used for memmap
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Normal zone: 0 pages reserved
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Normal zone: 16256 pages, LIFO batch:3
- ash: missing ]
- root@Pineapple:~# [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- ash: missing ]
- root@Pineapple:~# [ 0.000000] pcpu-alloc: [0] 0
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Kernel command line: board=MK5 console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
- ash: missing ]
- root@Pineapple:~# [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Writing ErrCtl register=00000000
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Readback ErrCtl register=00000000
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Memory: 61592k/65536k available (2124k kernel code, 3944k reserved, 406k data, 212k init, 0k
- highmem)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.080000] pid_max: default: 32768 minimum: 301
- [ 0.080000] Mount-cache hash table entries: 512
- ash: missing ]
- root@Pineapple:~# [ 0.000000] NR_IRQS:51
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.080000] pid_max: default: 32768 minimum: 301
- ash: missing ]
- root@Pineapple:~# [ 0.080000] Mount-cache hash table entries: 512
- ash: missing ]
- root@Pineapple:~# [ 0.090000] NET: Registered protocol family 16
- ash: missing ]
- root@Pineapple:~# [ 0.090000] gpiochip_add: registered GPIOs 0 to 29 on device: ath79
- ash: missing ]
- [ 0.360000] NET: Registered protocol family 2
- root@Pineapple:~# [ 0.100000] MIPS: machine is MK5 V1.0
- ash: missing ]
- root@Pineapple:~# [ 0.350000] bio: create slab <bio-0> at 0
- -ash: can't open bio-0: no such file
- root@Pineapple:~# [ 0.360000] Switching to clocksource MIPS
- ash: missing ]
- root@Pineapple:~# [ 0.360000] NET: Registered protocol family 2
- ash: missing ]
- root@Pineapple:~# [ 0.370000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.370000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.370000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.380000] TCP: Hash tables configured (established 2048 bind 2048)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.390000] TCP reno registered
- ash: missing ]
- root@Pineapple:~# [ 0.390000] UDP hash table entries: 256 (order: 0, 4096 bytes)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.400000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.400000] NET: Registered protocol family 1
- ash: missing ]
- root@Pineapple:~# [ 0.410000] PCI: CLS 0 bytes, default 32
- ash: missing ]
- root@Pineapple:~# [ 0.430000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.430000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, In
- c.
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.440000] msgmni has been set to 120
- ash: missing ]
- root@Pineapple:~# [ 0.440000] io scheduler noop registered
- ash: missing ]
- root@Pineapple:~# [ 0.450000] io scheduler deadline registered (default)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.450000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
- ash: missing ]
- root@Pineapple:~# [ 0.460000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.470000] console [ttyATH0] enabled, bootconsole disabled
- ash: missing ]
- root@Pineapple:~# [ 0.480000] m25p80 spi0.0: found w25q128, expected m25p80
- ash: missing ]
- root@Pineapple:~# [ 0.480000] m25p80 spi0.0: w25q128 (16384 Kbytes)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.490000] 5 tp-link partitions found on MTD device spi0.0
- ash: missing ]
- root@Pineapple:~# [ 0.490000] Creating 5 MTD partitions on "spi0.0":
- ash: missing ]
- root@Pineapple:~# [ 0.500000] 0x000000000000-0x000000020000 : "u-boot"
- ash: missing ]
- root@Pineapple:~# [ 0.510000] 0x000000020000-0x000000102758 : "kernel"
- ash: missing ]
- root@Pineapple:~# [ 0.510000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than
- an erase block -- forcing read-only
- ash: missing ]
- root@Pineapple:~# [ 0.520000] 0x000000102758-0x000000ff0000 : "rootfs"
- ash: missing ]
- root@Pineapple:~# [ 0.530000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than
- an erase block -- forcing read-only
- ash: missing ]
- root@Pineapple:~# [ 0.540000] mtd: partition "rootfs" set to be root filesystem
- ash: missing ]
- root@Pineapple:~# [ 0.550000] mtd: partition "rootfs_data" created automatically, ofs=CD0000, len=320000
- ash: missing ]
- root@Pineapple:~# [ 0.550000] 0x000000cd0000-0x000000ff0000 : "rootfs_data"
- ash: missing ]
- root@Pineapple:~# [ 0.560000] 0x000000ff0000-0x000001000000 : "art"
- ash: missing ]
- root@Pineapple:~# [ 0.570000] 0x000000020000-0x000000ff0000 : "firmware"
- ash: missing ]
- root@Pineapple:~# [ 0.590000] ag71xx_mdio: probed
- ash: missing ]
- root@Pineapple:~# [ 0.590000] eth0: Atheros AG71xx at 0xb9000000, irq 4
- ash: missing ]
- root@Pineapple:~# [ 1.150000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PH
- Y]
- ash: missing ]
- root@Pineapple:~# [ 1.160000] TCP cubic registered
- ash: missing ]
- root@Pineapple:~# [ 1.160000] NET: Registered protocol family 17
- [ 1.190000] Freeing unused kernel memory: 212k freed
- [ 3.580000] Registered led device: mk5:red:wlan1
- ash: missing ]
- [ 3.580000] Registered led device: mk5:blue:wlan0
- [ 3.580000] Registered led device: mk5:amber:lan
- root@Pineapple:~# [ 1.160000] Bridge firewalling registered
- ash: missing ]
- root@Pineapple:~# [ 1.170000] 8021q: 802.1Q VLAN Support v1.8
- ash: missing ]
- root@Pineapple:~# [ 1.180000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
- [ 8.170000] usbcore: registered new interface driver usbfs
- [ 8.170000] usbcore: registered new interface driver hub
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 1.190000] Freeing unused kernel memory: 212k freed
- ash: missing ]
- root@Pineapple:~# [ 3.580000] Registered led device: mk5:red:wlan1
- ash: missing ]
- root@Pineapple:~# [ 3.580000] Registered led device: mk5:blue:wlan0
- ash: missing ]
- root@Pineapple:~# [ 3.580000] Registered led device: mk5:amber:lan
- ash: missing ]
- root@Pineapple:~# [ 6.910000] JFFS2 notice: (421) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xda
- tum (1 unchecked, 0 orphan) and 16 of xref (0 dead, 1 orphan) found.
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 7.870000] SCSI subsystem initialized
- ash: missing ]
- root@Pineapple:~# [ 8.170000] usbcore: registered new interface driver usbfs
- ash: missing ]
- root@Pineapple:~# [ 8.170000] usbcore: registered new interface driver hub
- ash: missing ]
- root@Pineapple:~# [ 8.180000] usbcore: registered new device driver usb
- ash: missing ]
- root@Pineapple:~# [ 8.730000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 8.730000] ehci-platform ehci-platform: Generic Platform EHCI Controller
- ash: missing ]
- root@Pineapple:~# [ 8.740000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
- ash: missing ]
- root@Pineapple:~# [ 8.780000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
- ash: missing ]
- root@Pineapple:~# [ 8.800000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
- ash: missing ]
- root@Pineapple:~# [ 8.800000] hub 1-0:1.0: USB hub found
- ash: missing ]
- root@Pineapple:~# [ 8.800000] hub 1-0:1.0: 1 port detected
- ash: missing ]
- root@Pineapple:~# [ 8.910000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 9.040000] uhci_hcd: USB Universal Host Controller Interface driver
- ash: missing ]
- root@Pineapple:~# [ 9.160000] Initializing USB Mass Storage driver...
- ash: missing ]
- root@Pineapple:~# [ 9.160000] usbcore: registered new interface driver usb-storage
- ash: missing ]
- root@Pineapple:~# [ 9.170000] USB Mass Storage support registered.
- ash: missing ]
- root@Pineapple:~# [ 9.270000] usb 1-1: new high-speed USB device number 2 using ehci-platform
- ash: missing ]
- root@Pineapple:~# [ 9.390000] usb 1-1: device descriptor read/64, error -32
- ash: missing ]
- root@Pineapple:~# [ 9.620000] usb 1-1: device descriptor read/64, error -32
- ash: missing ]
- root@Pineapple:~# [ 9.850000] usb 1-1: new high-speed USB device number 3 using ehci-platform
- ash: missing ]
- root@Pineapple:~# [ 9.970000] usb 1-1: device descriptor read/64, error -32
- ash: missing ]
- root@Pineapple:~# [ 10.200000] usb 1-1: device descriptor read/64, error -32
- ash: missing ]
- root@Pineapple:~# [ 10.430000] usb 1-1: new high-speed USB device number 4 using ehci-platform
- ash: missing ]
- root@Pineapple:~# [ 10.460000] hub 1-1:1.0: USB hub found
- ash: missing ]
- root@Pineapple:~# [ 10.460000] hub 1-1:1.0: 4 ports detected
- ash: missing ]
- root@Pineapple:~# [ 10.740000] usb 1-1.1: new high-speed USB device number 5 using ehci-platform
- ash: missing ]
- root@Pineapple:~# [ 10.980000] usb 1-1.4: new high-speed USB device number 6 using ehci-platform
- ash: missing ]
- [ 12.110000] scsi 0:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0
- root@Pineapple:~# [ 11.110000] scsi0 : usb-storage 1-1.4:1.0
- ash: missing ]
- root@Pineapple:~# [ 12.110000] scsi 0:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0
- ash: missing ]
- root@Pineapple:~# [ 12.690000] sd 0:0:0:0: [sda] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 12.700000] sd 0:0:0:0: [sda] Write Protect is off
- ash: missing ]
- root@Pineapple:~# [ 12.700000] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
- ash: missing ]
- root@Pineapple:~# [ 12.700000] sd 0:0:0:0: [sda] No Caching mode page present
- ash: missing ]
- root@Pineapple:~# [ 12.710000] sd 0:0:0:0: [sda] Assuming drive cache: write through
- ash: missing ]
- root@Pineapple:~# [ 12.720000] sd 0:0:0:0: [sda] No Caching mode page present
- ash: missing ]
- root@Pineapple:~# [ 12.720000] sd 0:0:0:0: [sda] Assuming drive cache: write through
- ash: missing ]
- [ 12.750000] sd 0:0:0:0: [sda] No Caching mode page present
- [ 12.750000] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 12.760000] sd 0:0:0:0: [sda] Attached SCSI removable disk
- root@Pineapple:~# [ 12.740000] sda: sda1 sda2
- ash: missing ]
- root@Pineapple:~# [ 12.750000] sd 0:0:0:0: [sda] No Caching mode page present
- ash: missing ]
- root@Pineapple:~# [ 12.750000] sd 0:0:0:0: [sda] Assuming drive cache: write through
- ash: missing ]
- root@Pineapple:~# [ 12.760000] sd 0:0:0:0: [sda] Attached SCSI removable disk
- ash: missing ]
- root@Pineapple:~# [ 16.960000] usb 1-1.2: new high-speed USB device number 7 using ehci-platform
- ash: missing ]
- root@Pineapple:~# [ 17.340000] scsi1 : usb-storage 1-1.2:1.0
- ash: missing ]
- root@Pineapple:~# [ 17.340000] scsi2 : usb-storage 1-1.2:1.1
- ash: missing ]
- root@Pineapple:~# [ 19.870000] scsi 1:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
- ash: missing ]
- root@Pineapple:~# [ 19.880000] scsi 2:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
- ash: missing ]
- root@Pineapple:~# [ 19.900000] sd 2:0:0:0: [sdb] Attached SCSI removable disk
- ash: missing ]
- root@Pineapple:~# [ 33.220000] Loading modules backported from Linux version master-2014-01-23-0-g62c147d
- ash: missing ]
- root@Pineapple:~# [ 33.230000] Backport generated by backports.git backports-20140124-0-g1256d3e
- ash: missing ]
- root@Pineapple:~# [ 33.340000] cfg80211: Calling CRDA to update world regulatory domain
- ash: missing ]
- root@Pineapple:~# [ 33.350000] cfg80211: World regulatory domain updated:
- ash: missing ]
- root@Pineapple:~# [ 33.350000] cfg80211: DFS Master region: unset
- ash: missing ]
- root@Pineapple:~# [ 33.360000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 33.370000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 33.370000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 33.380000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 33.390000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 33.400000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 33.400000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 34.950000] usbcore: registered new interface driver rt73usb
- ash: missing ]
- root@Pineapple:~# [ 35.000000] ath: EEPROM regdomain: 0x0
- ash: missing ]
- root@Pineapple:~# [ 35.000000] ath: EEPROM indicates default country code should be used
- ash: missing ]
- root@Pineapple:~# [ 35.000000] ath: doing EEPROM country->regdmn map search
- [ 35.080000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2400 mBm)
- [ 35.090000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 3000 mBm)
- ash: missing ]
- [ 35.090000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
- [ 35.390000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
- [ 35.390000] ieee80211 phy1: hwaddr 00:13:37:93:59:99, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
- root@Pineapple:~# [ 35.000000] ath: country maps to regdmn code: 0x3a
- ash: missing ]
- root@Pineapple:~# [ 35.000000] ath: Country alpha2 being used: US
- ash: missing ]
- root@Pineapple:~# [ 35.000000] ath: Regpair used: 0x3a
- ash: missing ]
- root@Pineapple:~# [ 35.020000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- ash: missing ]
- root@Pineapple:~# [ 35.020000] Registered led device: ath9k-phy0
- ash: missing ]
- root@Pineapple:~# [ 35.020000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
- ash: missing ]
- root@Pineapple:~# [ 35.030000] cfg80211: Calling CRDA for country: US
- ash: missing ]
- root@Pineapple:~# [ 35.030000] cfg80211: Regulatory domain changed to country: US
- ash: missing ]
- root@Pineapple:~# [ 35.040000] cfg80211: DFS Master region: FCC
- ash: missing ]
- root@Pineapple:~# [ 35.040000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 35.050000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 35.060000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 1700 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 35.060000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2400 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 35.070000] cfg80211: (5490000 KHz - 5600000 KHz @ 80000 KHz), (300 mBi, 2400 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 35.080000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2400 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 35.090000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 3000 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 35.090000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 35.390000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
- ash: missing ]
- root@Pineapple:~# [ 35.390000] ieee80211 phy1: hwaddr 00:13:37:93:59:99, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 35.420000] rtl8187: Customer ID is 0x46
- ash: missing ]
- root@Pineapple:~# [ 35.420000] Registered led device: rtl8187-phy1::radio
- ash: missing ]
- root@Pineapple:~# [ 35.420000] Registered led device: rtl8187-phy1::tx
- ash: missing ]
- root@Pineapple:~# [ 35.420000] Registered led device: rtl8187-phy1::rx
- ash: missing ]
- root@Pineapple:~# [ 35.430000] rtl8187: wireless switch is on
- ash: missing ]
- root@Pineapple:~# [ 35.430000] usbcore: registered new interface driver rtl8187
- ash: missing ]
- root@Pineapple:~# [ 35.520000] Button Hotplug driver version 0.4.1
- ash: missing ]
- root@Pineapple:~# [ 35.730000] RPC: Registered named UNIX socket transport module.
- ash: missing ]
- root@Pineapple:~# [ 35.740000] RPC: Registered udp transport module.
- ash: missing ]
- root@Pineapple:~# [ 35.740000] RPC: Registered tcp transport module.
- ash: missing ]
- root@Pineapple:~# [ 35.750000] RPC: Registered tcp NFSv4.1 backchannel transport module.
- ash: missing ]
- root@Pineapple:~# [ 36.070000] PPP generic driver version 2.4.2
- ash: missing ]
- root@Pineapple:~# [ 36.110000] usbcore: registered new interface driver rt2800usb
- ash: missing ]
- root@Pineapple:~# [ 36.240000] tun: Universal TUN/TAP device driver, 1.6
- ash: missing ]
- root@Pineapple:~# [ 36.240000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 36.590000] ip_tables: (C) 2000-2006 Netfilter Core Team
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 36.820000] NET: Registered protocol family 24
- ash: missing ]
- root@Pineapple:~# [ 36.960000] nf_conntrack version 0.5.0 (965 buckets, 3860 max)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 37.670000] xt_time: kernel timezone is -0000
- ash: missing ]
- root@Pineapple:~# [ 38.200000] usbcore: registered new interface driver ath9k_htc
- ash: missing ]
- root@Pineapple:~# [ 38.240000] usbcore: registered new interface driver cdc_acm
- ash: missing ]
- root@Pineapple:~# [ 38.240000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- ash: missing ]
- root@Pineapple:~# [ 38.470000] usbcore: registered new interface driver usbserial
- ash: missing ]
- root@Pineapple:~# [ 38.470000] USB Serial support registered for generic
- ash: missing ]
- root@Pineapple:~# [ 38.480000] usbcore: registered new interface driver usbserial_generic
- ash: missing ]
- root@Pineapple:~# [ 38.480000] usbserial: USB Serial Driver core
- ash: missing ]
- root@Pineapple:~# [ 38.620000] usbcore: registered new interface driver asix
- ash: missing ]
- root@Pineapple:~# [ 38.700000] usbcore: registered new interface driver cdc_ether
- ash: missing ]
- root@Pineapple:~# [ 38.940000] Error: Driver 'gpio-keys-polled' is already registered, aborting...
- ash: missing ]
- root@Pineapple:~# [ 39.040000] usbcore: registered new interface driver rndis_host
- ash: missing ]
- root@Pineapple:~# [ 39.160000] sd 0:0:0:0: Attached scsi generic sg0 type 0
- ash: missing ]
- root@Pineapple:~# [ 39.160000] scsi 1:0:0:0: Attached scsi generic sg1 type 5
- ash: missing ]
- root@Pineapple:~# [ 39.160000] sd 2:0:0:0: Attached scsi generic sg2 type 0
- ash: missing ]
- root@Pineapple:~# 2(wlan0) entered forwarding state
- -ash: syntax error: unexpected word (expecting ")")
- root@Pineapple:~# -ash: syntax error: unexpected "("
- -ash: -ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 53.640000] br-lan: port 2(wlan0) entered forwarding state
- -ash: syntax error: unexpected "("
- root@Pineapple:~# -ash: syntax error: unexpected "("
- -ash: -ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 54.8
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# ash: missing ]
- -ash: ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 54.890000] scsi 3:0:0:0: Attached scsi generic sg1 type 5
- -ash: root@Pineapple:~#: not found-ash: syntax error: unexpected "("
- root@Pineapple:~# [ 68.540000] wlan1: associated
- ash: missing ]
- root@Pineapple:~# [ 81.450000] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibi
- root@Pineapple:~# ash: missing ]
- -ash: ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 54.900000] scsi 4:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# : 0 ANSI: 2
- root@Pineapple:~# ash: missing ]
- -ash: ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 54.900000] sd 4:0:0:0: Attached scsi generic sg2 type 0
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# ash: missing ]
- -ash: ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 54
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# ash: missing ]
- -ash: ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 55.640000] br-lan: port 2(wlan0) entered forwarding state
- -ash: syntax error: unexpected "("
- root@Pineapple:~# -ash: syntax error: unexpected "("
- -ash: -ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 67.100000] wlan1: authenticate with 14:5b:d1:2f:41:9b
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# ash: missing ]
- -ash: ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 68.450000] wlan1: send auth to 14:5b:d1:2f:41:9b (try 1/3)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# -ash: syntax error: unexpected "("
- -ash: -ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 68.460000] wlan1: authenticated
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# ash: missing ]
- -ash: ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 68.520000] wlan1: associate with 14:5b:d1:2f:41:9b (try 1/3)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# -ash: syntax error: unexpected "("
- -ash: -ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 68.530000] wlan1: RX AssocResp from 14:5b:d1:2f:41:9b (capab=0x411 status=0
- -ash: syntax error: unexpected "("
- root@Pineapple:~# -ash: syntax error: unexpected "("
- -ash: -ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 68.540000] wlan1: associated
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# ash: missing ]
- -ash: ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 81.450000] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibi
- -ash: syntax error: unexpected "("
- root@Pineapple:~#
- root@Pineapple:~# -ash: syntax error: unexpected "("
- -ash: -ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 81.460000] EXT4-fs (sda1): couldn't mou
- -ash: syntax error: unexpected "("
- root@Pineapple:~# -ash: syntax error: unexpected "("
- -ash: -ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 81.500000] EXT4-fs (sda1): mounted filesystem with or
- -ash: syntax error: unexpected "("
- root@Pineapple:~# -ash: syntax error: unexpected "("
- -ash: -ash:: not found
- root@Pineapple:~# root@Pineapple:~# [ 82.460000] Adding 1004024k swap on /dev/sda2. Pri
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# ash: missing ]
- -ash: ash:: not found
- root@Pineapple:~# root@Pineapple:~# root@Pineapple:~#
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# -ash: root@Pineapple:~#: not found
- -ash: -ash:: not found
- root@Pineapple:~# root@Pineapple:~# clr
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# -ash: clr: not found
- -ash: -ash:: not found
- root@Pineapple:~# root@Pineapple:~# clear
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# root@Pineapple:~# dmesg
- -ash: root@Pineapple:~#: not found
- root@Pineapple:~# [ 0.000000] Linux version 3.3.8 (sebkinne@buildtop) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC
- 4.6-2012.02) ) #81 Mon Aug 3 19:40:39 PDT 2015
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.000000] MyLoader: sysp=97d936c9, boardp=61b798de, parts=6238a85e
- ash: missing ]
- root@Pineapple:~# [ 0.000000] bootconsole [early0] enabled
- ash: missing ]
- root@Pineapple:~# [ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.000000] SoC: Atheros AR9330 rev 1
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Determined physical RAM map:
- ash: missing ]
- root@Pineapple:~# [ 0.000000] memory: 04000000 @ 00000000 (usable)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.000000] Initrd not found or empty - disabling initrd
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Zone PFN ranges:
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Normal 0x00000000 -> 0x00004000
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Movable zone start PFN for each node
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Early memory PFN ranges
- ash: missing ]
- root@Pineapple:~# [ 0.000000] 0: 0x00000000 -> 0x00004000
- ash: missing ]
- root@Pineapple:~# [ 0.000000] On node 0 totalpages: 16384
- ash: missing ]
- root@Pineapple:~# [ 0.000000] free_area_init_node: node 0, pgdat 802d8470, node_mem_map 81000000
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Normal zone: 128 pages used for memmap
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Normal zone: 0 pages reserved
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Normal zone: 16256 pages, LIFO batch:3
- ash: missing ]
- root@Pineapple:~# [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- ash: missing ]
- root@Pineapple:~# [ 0.000000] pcpu-alloc: [0] 0
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Kernel command line: board=MK5 console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
- ash: missing ]
- root@Pineapple:~# [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Writing ErrCtl register=00000000
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Readback ErrCtl register=00000000
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Memory: 61592k/65536k available (2124k kernel code, 3944k reserved, 406k data, 212k init, 0k
- highmem)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- ash: missing ]
- [ 0.430000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.430000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- root@Pineapple:~# [ 0.000000] NR_IRQS:51
- ash: missing ]
- root@Pineapple:~# [ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.080000] pid_max: default: 32768 minimum: 301
- ash: missing ]
- root@Pineapple:~# [ 0.080000] Mount-cache hash table entries: 512
- ash: missing ]
- root@Pineapple:~# [ 0.090000] NET: Registered protocol family 16
- ash: missing ]
- root@Pineapple:~# [ 0.090000] gpiochip_add: registered GPIOs 0 to 29 on device: ath79
- ash: missing ]
- root@Pineapple:~# [ 0.100000] MIPS: machine is MK5 V1.0
- ash: missing ]
- root@Pineapple:~# [ 0.350000] bio: create slab <bio-0> at 0
- -ash: can't open bio-0: no such file
- root@Pineapple:~# [ 0.360000] Switching to clocksource MIPS
- ash: missing ]
- root@Pineapple:~# [ 0.360000] NET: Registered protocol family 2
- ash: missing ]
- root@Pineapple:~# [ 0.370000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.370000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.370000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.380000] TCP: Hash tables configured (established 2048 bind 2048)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.390000] TCP reno registered
- ash: missing ]
- root@Pineapple:~# [ 0.390000] UDP hash table entries: 256 (order: 0, 4096 bytes)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.400000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.400000] NET: Registered protocol family 1
- ash: missing ]
- root@Pineapple:~# [ 0.410000] PCI: CLS 0 bytes, default 32
- ash: missing ]
- root@Pineapple:~# [ 0.430000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.430000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, In
- c.
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.440000] msgmni has been set to 120
- ash: missing ]
- root@Pineapple:~# [ 0.440000] io scheduler noop registered
- ash: missing ]
- root@Pineapple:~# [ 0.450000] io scheduler deadline registered (default)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.450000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
- [ 0.520000] 0x000000102758-0x000000ff0000 : "rootfs"
- [ 0.530000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
- ash: missing ]
- [ 0.540000] mtd: partition "rootfs" set to be root filesystem
- [ 0.550000] mtd: partition "rootfs_data" created automatically, ofs=CD0000, len=320000
- root@Pineapple:~# [ 0.460000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.470000] console [ttyATH0] enabled, bootconsole disabled
- ash: missing ]
- root@Pineapple:~# [ 0.480000] m25p80 spi0.0: found w25q128, expected m25p80
- ash: missing ]
- root@Pineapple:~# [ 0.480000] m25p80 spi0.0: w25q128 (16384 Kbytes)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 0.490000] 5 tp-link partitions found on MTD device spi0.0
- ash: missing ]
- root@Pineapple:~# [ 0.490000] Creating 5 MTD partitions on "spi0.0":
- ash: missing ]
- root@Pineapple:~# [ 0.500000] 0x000000000000-0x000000020000 : "u-boot"
- ash: missing ]
- root@Pineapple:~# [ 0.510000] 0x000000020000-0x000000102758 : "kernel"
- ash: missing ]
- root@Pineapple:~# [ 0.510000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than
- an erase block -- forcing read-only
- ash: missing ]
- [ 0.590000] eth0: Atheros AG71xx at 0xb9000000, irq 4
- root@Pineapple:~# [ 0.520000] 0x000000102758-0x000000ff0000 : "rootfs"
- ash: missing ]
- root@Pineapple:~# [ 0.530000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than
- an erase block -- forcing read-only
- ash: missing ]
- root@Pineapple:~# [ 0.540000] mtd: partition "rootfs" set to be root filesystem
- ash: missing ]
- root@Pineapple:~# [ 0.550000] mtd: partition "rootfs_data" created automatically, ofs=CD0000, len=320000
- ash: missing ]
- root@Pineapple:~# [ 0.550000] 0x000000cd0000-0x000000ff0000 : "rootfs_data"
- ash: missing ]
- root@Pineapple:~# [ 0.560000] 0x000000ff0000-0x000001000000 : "art"
- ash: missing ]
- root@Pineapple:~# [ 0.570000] 0x000000020000-0x000000ff0000 : "firmware"
- ash: missing ]
- root@Pineapple:~# [ 0.590000] ag71xx_mdio: probed
- ash: missing ]
- root@Pineapple:~# [ 0.590000] eth0: Atheros AG71xx at 0xb9000000, irq 4
- ash: missing ]
- root@Pineapple:~# [ 1.150000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PH
- Y]
- ash: missing ]
- root@Pineapple:~# [ 1.160000] TCP cubic registered
- ash: missing ]
- root@Pineapple:~# [ 1.160000] NET: Registered protocol family 17
- ash: missing ]
- root@Pineapple:~# [ 1.160000] Bridge firewalling registered
- ash: missing ]
- root@Pineapple:~# [ 1.170000] 8021q: 802.1Q VLAN Support v1.8
- ash: missing ]
- root@Pineapple:~# [ 1.180000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 1.190000] Freeing unused kernel memory: 212k freed
- ash: missing ]
- root@Pineapple:~# [ 3.580000] Registered led device: mk5:red:wlan1
- ash: missing ]
- root@Pineapple:~# [ 3.580000] Registered led device: mk5:blue:wlan0
- ash: missing ]
- root@Pineapple:~# [ 3.580000] Registered led device: mk5:amber:lan
- ash: missing ]
- root@Pineapple:~# [ 6.910000] JFFS2 notice: (421) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xda
- tum (1 unchecked, 0 orphan) and 16 of xref (0 dead, 1 orphan) found.
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 7.870000] SCSI subsystem initialized
- ash: missing ]
- root@Pineapple:~# [ 8.170000] usbcore: registered new interface driver usbfs
- ash: missing ]
- root@Pineapple:~# [ 8.170000] usbcore: registered new interface driver hub
- ash: missing ]
- root@Pineapple:~# [ 8.180000] usbcore: registered new device driver usb
- ash: missing ]
- root@Pineapple:~# [ 8.730000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 8.730000] ehci-platform ehci-platform: Generic Platform EHCI Controller
- ash: missing ]
- root@Pineapple:~# [ 8.740000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
- ash: missing ]
- root@Pineapple:~# [ 8.780000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
- ash: missing ]
- root@Pineapple:~# [ 8.800000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
- ash: missing ]
- root@Pineapple:~# [ 8.800000] hub 1-0:1.0: USB hub found
- ash: missing ]
- root@Pineapple:~# [ 8.800000] hub 1-0:1.0: 1 port detected
- ash: missing ]
- root@Pineapple:~# [ 8.910000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 9.040000] uhci_hcd: USB Universal Host Controller Interface driver
- ash: missing ]
- root@Pineapple:~# [ 9.160000] Initializing USB Mass Storage driver...
- ash: missing ]
- root@Pineapple:~# [ 9.160000] usbcore: registered new interface driver usb-storage
- ash: missing ]
- root@Pineapple:~# [ 9.170000] USB Mass Storage support registered.
- ash: missing ]
- root@Pineapple:~# [ 9.270000] usb 1-1: new high-speed USB device number 2 using ehci-platform
- ash: missing ]
- root@Pineapple:~# [ 9.390000] usb 1-1: device descriptor read/64, error -32
- ash: missing ]
- root@Pineapple:~# [ 9.620000] usb 1-1: device descriptor read/64, error -32
- ash: missing ]
- root@Pineapple:~# [ 9.850000] usb 1-1: new high-speed USB device number 3 using ehci-platform
- ash: missing ]
- root@Pineapple:~# [ 9.970000] usb 1-1: device descriptor read/64, error -32
- ash: missing ]
- root@Pineapple:~# [ 10.200000] usb 1-1: device descriptor read/64, error -32
- ash: missing ]
- root@Pineapple:~# [ 10.430000] usb 1-1: new high-speed USB device number 4 using ehci-platform
- ash: missing ]
- root@Pineapple:~# [ 10.460000] hub 1-1:1.0: USB hub found
- ash: missing ]
- root@Pineapple:~# [ 10.460000] hub 1-1:1.0: 4 ports detected
- ash: missing ]
- root@Pineapple:~# [ 10.740000] usb 1-1.1: new high-speed USB device number 5 using ehci-platform
- ash: missing ]
- root@Pineapple:~# [ 10.980000] usb 1-1.4: new high-speed USB device number 6 using ehci-platform
- ash: missing ]
- root@Pineapple:~# [ 11.110000] scsi0 : usb-storage 1-1.4:1.0
- ash: missing ]
- root@Pineapple:~# [ 12.110000] scsi 0:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0
- ash: missing ]
- root@Pineapple:~# [ 12.690000] sd 0:0:0:0: [sda] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 12.700000] sd 0:0:0:0: [sda] Write Protect is off
- ash: missing ]
- root@Pineapple:~# [ 12.700000] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
- ash: missing ]
- root@Pineapple:~# [ 12.700000] sd 0:0:0:0: [sda] No Caching mode page present
- ash: missing ]
- root@Pineapple:~# [ 12.710000] sd 0:0:0:0: [sda] Assuming drive cache: write through
- ash: missing ]
- root@Pineapple:~# [ 12.720000] sd 0:0:0:0: [sda] No Caching mode page present
- ash: missing ]
- root@Pineapple:~# [ 12.720000] sd 0:0:0:0: [sda] Assuming drive cache: write through
- ash: missing ]
- root@Pineapple:~# [ 12.740000] sda: sda1 sda2
- ash: missing ]
- root@Pineapple:~# [ 12.750000] sd 0:0:0:0: [sda] No Caching mode page present
- ash: missing ]
- root@Pineapple:~# [ 12.750000] sd 0:0:0:0: [sda] Assuming drive cache: write through
- ash: missing ]
- root@Pineapple:~# [ 12.760000] sd 0:0:0:0: [sda] Attached SCSI removable disk
- ash: missing ]
- root@Pineapple:~# [ 16.960000] usb 1-1.2: new high-speed USB device number 7 using ehci-platform
- ash: missing ]
- root@Pineapple:~# [ 17.340000] scsi1 : usb-storage 1-1.2:1.0
- ash: missing ]
- root@Pineapple:~# [ 17.340000] scsi2 : usb-storage 1-1.2:1.1
- ash: missing ]
- root@Pineapple:~# [ 19.870000] scsi 1:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
- ash: missing ]
- root@Pineapple:~# [ 19.880000] scsi 2:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
- ash: missing ]
- root@Pineapple:~# [ 19.900000] sd 2:0:0:0: [sdb] Attached SCSI removable disk
- ash: missing ]
- root@Pineapple:~# [ 33.220000] Loading modules backported from Linux version master-2014-01-23-0-g62c147d
- ash: missing ]
- root@Pineapple:~# [ 33.230000] Backport generated by backports.git backports-20140124-0-g1256d3e
- ash: missing ]
- root@Pineapple:~# [ 33.340000] cfg80211: Calling CRDA to update world regulatory domain
- ash: missing ]
- root@Pineapple:~# [ 33.350000] cfg80211: World regulatory domain updated:
- ash: missing ]
- root@Pineapple:~# [ 33.350000] cfg80211: DFS Master region: unset
- ash: missing ]
- [ 35.070000] cfg80211: (5490000 KHz - 5600000 KHz @ 80000 KHz), (300 mBi, 2400 mBm)
- [ 35.080000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2400 mBm)
- root@Pineapple:~# [ 33.360000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 33.370000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 33.370000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 33.380000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 33.390000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 33.400000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 33.400000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 34.950000] usbcore: registered new interface driver rt73usb
- ash: missing ]
- [ 35.420000] Registered led device: rtl8187-phy1::radio
- root@Pineapple:~# [ 35.000000] ath: EEPROM regdomain: 0x0
- ash: missing ]
- root@Pineapple:~# [ 35.000000] ath: EEPROM indicates default country code should be used
- ash: missing ]
- root@Pineapple:~# [ 35.000000] ath: doing EEPROM country->regdmn map search
- ash: missing ]
- root@Pineapple:~# [ 35.000000] ath: country maps to regdmn code: 0x3a
- ash: missing ]
- root@Pineapple:~# [ 35.000000] ath: Country alpha2 being used: US
- ash: missing ]
- root@Pineapple:~# [ 35.000000] ath: Regpair used: 0x3a
- ash: missing ]
- root@Pineapple:~# [ 35.020000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- ash: missing ]
- root@Pineapple:~# [ 35.020000] Registered led device: ath9k-phy0
- ash: missing ]
- root@Pineapple:~# [ 35.020000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
- ash: missing ]
- root@Pineapple:~# [ 35.030000] cfg80211: Calling CRDA for country: US
- ash: missing ]
- root@Pineapple:~# [ 35.030000] cfg80211: Regulatory domain changed to country: US
- ash: missing ]
- root@Pineapple:~# [ 35.040000] cfg80211: DFS Master region: FCC
- ash: missing ]
- root@Pineapple:~# [ 35.040000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 35.050000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 35.060000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 1700 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 35.060000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2400 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 35.070000] cfg80211: (5490000 KHz - 5600000 KHz @ 80000 KHz), (300 mBi, 2400 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 35.080000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2400 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 35.090000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 3000 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 35.090000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 35.390000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
- ash: missing ]
- root@Pineapple:~# [ 35.390000] ieee80211 phy1: hwaddr 00:13:37:93:59:99, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 35.420000] rtl8187: Customer ID is 0x46
- ash: missing ]
- root@Pineapple:~# [ 35.420000] Registered led device: rtl8187-phy1::radio
- ash: missing ]
- root@Pineapple:~# [ 35.420000] Registered led device: rtl8187-phy1::tx
- ash: missing ]
- root@Pineapple:~# [ 35.420000] Registered led device: rtl8187-phy1::rx
- ash: missing ]
- root@Pineapple:~# [ 35.430000] rtl8187: wireless switch is on
- ash: missing ]
- root@Pineapple:~# [ 35.430000] usbcore: registered new interface driver rtl8187
- ash: missing ]
- root@Pineapple:~# [ 35.520000] Button Hotplug driver version 0.4.1
- ash: missing ]
- root@Pineapple:~# [ 35.730000] RPC: Registered named UNIX socket transport module.
- ash: missing ]
- root@Pineapple:~# [ 35.740000] RPC: Registered udp transport module.
- ash: missing ]
- root@Pineapple:~# [ 35.740000] RPC: Registered tcp transport module.
- ash: missing ]
- root@Pineapple:~# [ 35.750000] RPC: Registered tcp NFSv4.1 backchannel transport module.
- ash: missing ]
- root@Pineapple:~# [ 36.070000] PPP generic driver version 2.4.2
- ash: missing ]
- [ 38.240000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 38.470000] usbcore: registered new interface driver usbserial
- [ 38.470000] USB Serial support registered for generic
- [ 38.480000] usbcore: registered new interface driver usbserial_generic
- [ 38.480000] usbserial: USB Serial Driver core
- [ 38.620000] usbcore: registered new interface driver asix
- root@Pineapple:~# [ 36.110000] usbcore: registered new interface driver rt2800usb
- ash: missing ]
- root@Pineapple:~# [ 36.240000] tun: Universal TUN/TAP device driver, 1.6
- ash: missing ]
- root@Pineapple:~# [ 36.240000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 36.590000] ip_tables: (C) 2000-2006 Netfilter Core Team
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 36.820000] NET: Registered protocol family 24
- ash: missing ]
- root@Pineapple:~# [ 36.960000] nf_conntrack version 0.5.0 (965 buckets, 3860 max)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 37.670000] xt_time: kernel timezone is -0000
- ash: missing ]
- root@Pineapple:~# [ 38.200000] usbcore: registered new interface driver ath9k_htc
- ash: missing ]
- root@Pineapple:~# [ 38.240000] usbcore: registered new interface driver cdc_acm
- ash: missing ]
- root@Pineapple:~# [ 38.240000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- ash: missing ]
- root@Pineapple:~# [ 38.470000] usbcore: registered new interface driver usbserial
- [ 39.160000] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 39.160000] scsi 1:0:0:0: Attached scsi generic sg1 type 5
- [ 39.160000] sd 2:0:0:0: Attached scsi generic sg2 type 0
- ash: missing ]
- [ 39.190000] USB Serial support registered for GSM modem (1-port)
- root@Pineapple:~# [ 38.470000] USB Serial support registered for generic
- ash: missing ]
- root@Pineapple:~# [ 38.480000] usbcore: registered new interface driver usbserial_generic
- ash: missing ]
- root@Pineapple:~# [ 38.480000] usbserial: USB Serial Driver core
- ash: missing ]
- root@Pineapple:~# [ 38.620000] usbcore: registered new interface driver asix
- ash: missing ]
- root@Pineapple:~# [ 38.700000] usbcore: registered new interface driver cdc_ether
- ash: missing ]
- root@Pineapple:~# [ 38.940000] Error: Driver 'gpio-keys-polled' is already registered, aborting...
- ash: missing ]
- root@Pineapple:~# [ 39.040000] usbcore: registered new interface driver rndis_host
- ash: missing ]
- root@Pineapple:~# [ 39.160000] sd 0:0:0:0: Attached scsi generic sg0 type 0
- ash: missing ]
- root@Pineapple:~# [ 39.160000] scsi 1:0:0:0: Attached scsi generic sg1 type 5
- ash: missing ]
- root@Pineapple:~# [ 39.160000] sd 2:0:0:0: Attached scsi generic sg2 type 0
- ash: missing ]
- root@Pineapple:~# [ 39.190000] USB Serial support registered for GSM modem (1-port)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 39.200000] usbcore: registered new interface driver option
- ash: missing ]
- root@Pineapple:~# [ 39.200000] option: v0.7.2:USB Driver for GSM modems
- ash: missing ]
- root@Pineapple:~# [ 39.220000] USB Serial support registered for pl2303
- ash: missing ]
- root@Pineapple:~# [ 39.230000] usbcore: registered new interface driver pl2303
- ash: missing ]
- root@Pineapple:~# [ 39.230000] pl2303: Prolific PL2303 USB to serial adaptor driver
- ash: missing ]
- root@Pineapple:~# [ 45.720000] usb 1-1.2: USB disconnect, device number 7
- ash: missing ]
- root@Pineapple:~# [ 47.620000] device eth0 entered promiscuous mode
- ash: missing ]
- root@Pineapple:~# [ 51.780000] usb 1-1.2: new high-speed USB device number 8 using ehci-platform
- ash: missing ]
- root@Pineapple:~# [ 52.300000] option 1-1.2:1.0: GSM modem (1-port) converter detected
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 52.300000] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB0
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 52.310000] option 1-1.2:1.1: GSM modem (1-port) converter detected
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 52.320000] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB1
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 52.320000] option 1-1.2:1.2: GSM modem (1-port) converter detected
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 52.330000] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB2
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 52.350000] scsi3 : usb-storage 1-1.2:1.3
- ash: missing ]
- root@Pineapple:~# [ 52.350000] scsi4 : usb-storage 1-1.2:1.4
- ash: missing ]
- root@Pineapple:~# [ 53.570000] device wlan0 entered promiscuous mode
- ash: missing ]
- root@Pineapple:~# [ 53.630000] br-lan: port 2(wlan0) entered forwarding state
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 53.640000] br-lan: port 2(wlan0) entered forwarding state
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 54.880000] scsi 3:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
- ash: missing ]
- root@Pineapple:~# [ 54.890000] scsi 3:0:0:0: Attached scsi generic sg1 type 5
- ash: missing ]
- root@Pineapple:~# [ 54.900000] scsi 4:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
- ash: missing ]
- root@Pineapple:~# [ 54.900000] sd 4:0:0:0: Attached scsi generic sg2 type 0
- ash: missing ]
- root@Pineapple:~# [ 54.920000] sd 4:0:0:0: [sdb] Attached SCSI removable disk
- ash: missing ]
- root@Pineapple:~# [ 55.640000] br-lan: port 2(wlan0) entered forwarding state
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 67.100000] wlan1: authenticate with 14:5b:d1:2f:41:9b
- ash: missing ]
- root@Pineapple:~# [ 68.450000] wlan1: send auth to 14:5b:d1:2f:41:9b (try 1/3)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 68.460000] wlan1: authenticated
- ash: missing ]
- root@Pineapple:~# [ 68.520000] wlan1: associate with 14:5b:d1:2f:41:9b (try 1/3)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 68.530000] wlan1: RX AssocResp from 14:5b:d1:2f:41:9b (capab=0x411 status=0 aid=1)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 68.540000] wlan1: associated
- ash: missing ]
- root@Pineapple:~# [ 81.450000] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 81.460000] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 81.500000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- -ash: syntax error: unexpected "("
- root@Pineapple:~# [ 82.460000] Adding 1004024k swap on /dev/sda2. Priority:-1 extents:1 across:1004024k
- ash: missing ]
- root@Pineapple:~# clear
- root@Pineapple:~# dmesg
- [ 0.000000] Linux version 3.3.8 (sebkinne@buildtop) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #81 Mon Aug 3 19:40:39 PDT 2015
- [ 0.000000] MyLoader: sysp=97d936c9, boardp=61b798de, parts=6238a85e
- [ 0.000000] bootconsole [early0] enabled
- [ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
- [ 0.000000] SoC: Atheros AR9330 rev 1
- [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] memory: 04000000 @ 00000000 (usable)
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] Normal 0x00000000 -> 0x00004000
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] Early memory PFN ranges
- [ 0.000000] 0: 0x00000000 -> 0x00004000
- [ 0.000000] On node 0 totalpages: 16384
- [ 0.000000] free_area_init_node: node 0, pgdat 802d8470, node_mem_map 81000000
- [ 0.000000] Normal zone: 128 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 16256 pages, LIFO batch:3
- [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
- [ 0.000000] Kernel command line: board=MK5 console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
- [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
- [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
- [ 0.000000] Writing ErrCtl register=00000000
- [ 0.000000] Readback ErrCtl register=00000000
- [ 0.000000] Memory: 61592k/65536k available (2124k kernel code, 3944k reserved, 406k data, 212k init, 0k highmem)
- [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] NR_IRQS:51
- [ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
- [ 0.080000] pid_max: default: 32768 minimum: 301
- [ 0.080000] Mount-cache hash table entries: 512
- [ 0.090000] NET: Registered protocol family 16
- [ 0.090000] gpiochip_add: registered GPIOs 0 to 29 on device: ath79
- [ 0.100000] MIPS: machine is MK5 V1.0
- [ 0.350000] bio: create slab <bio-0> at 0
- [ 0.360000] Switching to clocksource MIPS
- [ 0.360000] NET: Registered protocol family 2
- [ 0.370000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.370000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
- [ 0.370000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.380000] TCP: Hash tables configured (established 2048 bind 2048)
- [ 0.390000] TCP reno registered
- [ 0.390000] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.400000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.400000] NET: Registered protocol family 1
- [ 0.410000] PCI: CLS 0 bytes, default 32
- [ 0.430000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.430000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 0.440000] msgmni has been set to 120
- [ 0.440000] io scheduler noop registered
- [ 0.450000] io scheduler deadline registered (default)
- [ 0.450000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
- [ 0.460000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
- [ 0.470000] console [ttyATH0] enabled, bootconsole disabled
- [ 0.480000] m25p80 spi0.0: found w25q128, expected m25p80
- [ 0.480000] m25p80 spi0.0: w25q128 (16384 Kbytes)
- [ 0.490000] 5 tp-link partitions found on MTD device spi0.0
- [ 0.490000] Creating 5 MTD partitions on "spi0.0":
- [ 0.500000] 0x000000000000-0x000000020000 : "u-boot"
- [ 0.510000] 0x000000020000-0x000000102758 : "kernel"
- [ 0.510000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
- [ 0.520000] 0x000000102758-0x000000ff0000 : "rootfs"
- [ 0.530000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
- [ 0.540000] mtd: partition "rootfs" set to be root filesystem
- [ 0.550000] mtd: partition "rootfs_data" created automatically, ofs=CD0000, len=320000
- [ 0.550000] 0x000000cd0000-0x000000ff0000 : "rootfs_data"
- [ 0.560000] 0x000000ff0000-0x000001000000 : "art"
- [ 0.570000] 0x000000020000-0x000000ff0000 : "firmware"
- [ 0.590000] ag71xx_mdio: probed
- [ 0.590000] eth0: Atheros AG71xx at 0xb9000000, irq 4
- [ 1.150000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
- [ 1.160000] TCP cubic registered
- [ 1.160000] NET: Registered protocol family 17
- [ 1.160000] Bridge firewalling registered
- [ 1.170000] 8021q: 802.1Q VLAN Support v1.8
- [ 1.180000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
- [ 1.190000] Freeing unused kernel memory: 212k freed
- [ 3.580000] Registered led device: mk5:red:wlan1
- [ 3.580000] Registered led device: mk5:blue:wlan0
- [ 3.580000] Registered led device: mk5:amber:lan
- [ 6.910000] JFFS2 notice: (421) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 16 of xref (0 dead, 1 orphan) found.
- [ 7.870000] SCSI subsystem initialized
- [ 8.170000] usbcore: registered new interface driver usbfs
- [ 8.170000] usbcore: registered new interface driver hub
- [ 8.180000] usbcore: registered new device driver usb
- [ 8.730000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 8.730000] ehci-platform ehci-platform: Generic Platform EHCI Controller
- [ 8.740000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
- [ 8.780000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
- [ 8.800000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
- [ 8.800000] hub 1-0:1.0: USB hub found
- [ 8.800000] hub 1-0:1.0: 1 port detected
- [ 8.910000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 9.040000] uhci_hcd: USB Universal Host Controller Interface driver
- [ 9.160000] Initializing USB Mass Storage driver...
- [ 9.160000] usbcore: registered new interface driver usb-storage
- [ 9.170000] USB Mass Storage support registered.
- [ 9.270000] usb 1-1: new high-speed USB device number 2 using ehci-platform
- [ 9.390000] usb 1-1: device descriptor read/64, error -32
- [ 9.620000] usb 1-1: device descriptor read/64, error -32
- [ 9.850000] usb 1-1: new high-speed USB device number 3 using ehci-platform
- [ 9.970000] usb 1-1: device descriptor read/64, error -32
- [ 10.200000] usb 1-1: device descriptor read/64, error -32
- [ 10.430000] usb 1-1: new high-speed USB device number 4 using ehci-platform
- [ 10.460000] hub 1-1:1.0: USB hub found
- [ 10.460000] hub 1-1:1.0: 4 ports detected
- [ 10.740000] usb 1-1.1: new high-speed USB device number 5 using ehci-platform
- [ 10.980000] usb 1-1.4: new high-speed USB device number 6 using ehci-platform
- [ 11.110000] scsi0 : usb-storage 1-1.4:1.0
- [ 12.110000] scsi 0:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0
- [ 12.690000] sd 0:0:0:0: [sda] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB)
- [ 12.700000] sd 0:0:0:0: [sda] Write Protect is off
- [ 12.700000] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
- [ 12.700000] sd 0:0:0:0: [sda] No Caching mode page present
- [ 12.710000] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 12.720000] sd 0:0:0:0: [sda] No Caching mode page present
- [ 12.720000] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 12.740000] sda: sda1 sda2
- [ 12.750000] sd 0:0:0:0: [sda] No Caching mode page present
- [ 12.750000] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 12.760000] sd 0:0:0:0: [sda] Attached SCSI removable disk
- [ 16.960000] usb 1-1.2: new high-speed USB device number 7 using ehci-platform
- [ 17.340000] scsi1 : usb-storage 1-1.2:1.0
- [ 17.340000] scsi2 : usb-storage 1-1.2:1.1
- [ 19.870000] scsi 1:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
- [ 19.880000] scsi 2:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
- [ 19.900000] sd 2:0:0:0: [sdb] Attached SCSI removable disk
- [ 33.220000] Loading modules backported from Linux version master-2014-01-23-0-g62c147d
- [ 33.230000] Backport generated by backports.git backports-20140124-0-g1256d3e
- [ 33.340000] cfg80211: Calling CRDA to update world regulatory domain
- [ 33.350000] cfg80211: World regulatory domain updated:
- [ 33.350000] cfg80211: DFS Master region: unset
- [ 33.360000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 33.370000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 33.370000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 33.380000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 33.390000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- [ 33.400000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- [ 33.400000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
- [ 34.950000] usbcore: registered new interface driver rt73usb
- [ 35.000000] ath: EEPROM regdomain: 0x0
- [ 35.000000] ath: EEPROM indicates default country code should be used
- [ 35.000000] ath: doing EEPROM country->regdmn map search
- [ 35.000000] ath: country maps to regdmn code: 0x3a
- [ 35.000000] ath: Country alpha2 being used: US
- [ 35.000000] ath: Regpair used: 0x3a
- [ 35.020000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 35.020000] Registered led device: ath9k-phy0
- [ 35.020000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
- [ 35.030000] cfg80211: Calling CRDA for country: US
- [ 35.030000] cfg80211: Regulatory domain changed to country: US
- [ 35.040000] cfg80211: DFS Master region: FCC
- [ 35.040000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 35.050000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
- [ 35.060000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 1700 mBm)
- [ 35.060000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2400 mBm)
- [ 35.070000] cfg80211: (5490000 KHz - 5600000 KHz @ 80000 KHz), (300 mBi, 2400 mBm)
- [ 35.080000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2400 mBm)
- [ 35.090000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 3000 mBm)
- [ 35.090000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
- [ 35.390000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
- [ 35.390000] ieee80211 phy1: hwaddr 00:13:37:93:59:99, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
- [ 35.420000] rtl8187: Customer ID is 0x46
- [ 35.420000] Registered led device: rtl8187-phy1::radio
- [ 35.420000] Registered led device: rtl8187-phy1::tx
- [ 35.420000] Registered led device: rtl8187-phy1::rx
- [ 35.430000] rtl8187: wireless switch is on
- [ 35.430000] usbcore: registered new interface driver rtl8187
- [ 35.520000] Button Hotplug driver version 0.4.1
- [ 35.730000] RPC: Registered named UNIX socket transport module.
- [ 35.740000] RPC: Registered udp transport module.
- [ 35.740000] RPC: Registered tcp transport module.
- [ 35.750000] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 36.070000] PPP generic driver version 2.4.2
- [ 36.110000] usbcore: registered new interface driver rt2800usb
- [ 36.240000] tun: Universal TUN/TAP device driver, 1.6
- [ 36.240000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 36.590000] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 36.820000] NET: Registered protocol family 24
- [ 36.960000] nf_conntrack version 0.5.0 (965 buckets, 3860 max)
- [ 37.670000] xt_time: kernel timezone is -0000
- [ 38.200000] usbcore: registered new interface driver ath9k_htc
- [ 38.240000] usbcore: registered new interface driver cdc_acm
- [ 38.240000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 38.470000] usbcore: registered new interface driver usbserial
- [ 38.470000] USB Serial support registered for generic
- [ 38.480000] usbcore: registered new interface driver usbserial_generic
- [ 38.480000] usbserial: USB Serial Driver core
- [ 38.620000] usbcore: registered new interface driver asix
- [ 38.700000] usbcore: registered new interface driver cdc_ether
- [ 38.940000] Error: Driver 'gpio-keys-polled' is already registered, aborting...
- [ 39.040000] usbcore: registered new interface driver rndis_host
- [ 39.160000] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 39.160000] scsi 1:0:0:0: Attached scsi generic sg1 type 5
- [ 39.160000] sd 2:0:0:0: Attached scsi generic sg2 type 0
- [ 39.190000] USB Serial support registered for GSM modem (1-port)
- [ 39.200000] usbcore: registered new interface driver option
- [ 39.200000] option: v0.7.2:USB Driver for GSM modems
- [ 39.220000] USB Serial support registered for pl2303
- [ 39.230000] usbcore: registered new interface driver pl2303
- [ 39.230000] pl2303: Prolific PL2303 USB to serial adaptor driver
- [ 45.720000] usb 1-1.2: USB disconnect, device number 7
- [ 47.620000] device eth0 entered promiscuous mode
- [ 51.780000] usb 1-1.2: new high-speed USB device number 8 using ehci-platform
- [ 52.300000] option 1-1.2:1.0: GSM modem (1-port) converter detected
- [ 52.300000] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB0
- [ 52.310000] option 1-1.2:1.1: GSM modem (1-port) converter detected
- [ 52.320000] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB1
- [ 52.320000] option 1-1.2:1.2: GSM modem (1-port) converter detected
- [ 52.330000] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB2
- [ 52.350000] scsi3 : usb-storage 1-1.2:1.3
- [ 52.350000] scsi4 : usb-storage 1-1.2:1.4
- [ 53.570000] device wlan0 entered promiscuous mode
- [ 53.630000] br-lan: port 2(wlan0) entered forwarding state
- [ 53.640000] br-lan: port 2(wlan0) entered forwarding state
- [ 54.880000] scsi 3:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
- [ 54.890000] scsi 3:0:0:0: Attached scsi generic sg1 type 5
- [ 54.900000] scsi 4:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
- [ 54.900000] sd 4:0:0:0: Attached scsi generic sg2 type 0
- [ 54.920000] sd 4:0:0:0: [sdb] Attached SCSI removable disk
- [ 55.640000] br-lan: port 2(wlan0) entered forwarding state
- [ 67.100000] wlan1: authenticate with 14:5b:d1:2f:41:9b
- [ 68.450000] wlan1: send auth to 14:5b:d1:2f:41:9b (try 1/3)
- [ 68.460000] wlan1: authenticated
- [ 68.520000] wlan1: associate with 14:5b:d1:2f:41:9b (try 1/3)
- [ 68.530000] wlan1: RX AssocResp from 14:5b:d1:2f:41:9b (capab=0x411 status=0 aid=1)
- [ 68.540000] wlan1: associated
- [ 81.450000] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
- [ 81.460000] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
- [ 81.500000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- [ 82.460000] Adding 1004024k swap on /dev/sda2. Priority:-1 extents:1 across:1004024k
- root@Pineapple:~#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement