Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Booting Linux on physical CPU 0
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.4.0-cyanogenmod-gb4a11db (clyde@cyanogenmod) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Tue Feb 23 23:33:55 PST 2016
- [ 0.000000] CPU: ARMv7 Processor [510f06f2] revision 2 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
- [ 0.000000] Machine: QCT APQ8064 MAKO
- [ 0.000000] Truncating memory at 0xc0000000 to fit in 32-bit physical address space
- [ 0.000000] Physical memory hole is not aligned. There will be a virtual memory hole from cd800000 to cd900000
- [ 0.000000] memory pool 3 (start 0xfe100000 size 1e00000) initialized
- [ 0.000000] Initialized persistent memory from 88700000-887fffff
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] smem_find(137, 80): wrong size 72
- [ 0.000000] socinfo_init: v6, id=109, ver=1.1, raw_id=1817, raw_ver=1817, hw_plat=8, hw_plat_ver=65536
- [ 0.000000] accessory_chip=0 hw_plat_subtype=1
- [ 0.000000] allocating 21626880 bytes at c26ce000 (828ce000 physical) for fb
- [ 0.000000] PERCPU: Embedded 8 pages/cpu @c3b71000 s16768 r0 d16000 u32768
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 477699
- [ 0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=mako lpj=67677 user_debug=31 uart_console=enable lcd_maker_id=primary lge.hreset=off lge.reset=rst_none gpt=enable lge.kcal=0|0|0|x lge.rev=rev_11 androidboot.emmc=true androidboot.serialno=0482edbce3d4b05b androidboot.bootloader=MAKOZ30f androidboot.mode=charger androidboot.baseband=mdm bootreason=power_on
- [ 0.000000] UART CONSOLE : enable
- [ 0.000000] kcal is 0|0|0|x
- [ 0.000000] kcal not calibrated yet : 120
- [ 0.000000] set to default : 255
- [ 0.000000] BOARD : LGE input rev_11
- [ 0.000000] BOARD : LGE matched rev_11
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Memory: 134MB 74MB 7MB 1MB 253MB 1412MB 0MB = 1881MB total
- [ 0.000000] Memory: 1870820k/1870820k available, 184344k reserved, 1257468K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] timers : 0xfffef000 - 0xffff0000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc0c17c40 (12352 kB)
- [ 0.000000] .init : 0xc0d00000 - 0xc0e18180 (1121 kB)
- [ 0.000000] .data : 0xc0e1a000 - 0xc0f000c0 ( 921 kB)
- [ 0.000000] .bss : 0xc0f000e4 - 0xc10daf24 (1900 kB)
- [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] NR_IRQS:921
- [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- [ 0.000000] Switching to timer-based delay loop
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000183] Calibrating delay loop (skipped) preset value.. 13.53 BogoMIPS (lpj=67677)
- [ 0.000213] pid_max: default: 32768 minimum: 301
- [ 0.000427] Security Framework initialized
- [ 0.000457] SELinux: Initializing.
- [ 0.000640] Mount-cache hash table entries: 512
- [ 0.001922] Initializing cgroup subsys debug
- [ 0.001922] Initializing cgroup subsys cpuacct
- [ 0.001953] Initializing cgroup subsys freezer
- [ 0.001953] Initializing cgroup subsys bfqio
- [ 0.002075] CPU: Testing write buffer coherency: ok
- [ 0.002380] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.002410] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
- [ 0.002471] Setting up static identity map for 0x80aec110 - 0x80aec198
- [ 0.006103] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.008331] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.010559] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.010711] Brought up 4 CPUs
- [ 0.010742] SMP: Total of 4 processors activated (54.14 BogoMIPS).
- [ 0.028869] dummy:
- [ 0.029296] NET: Registered protocol family 16
- [ 0.030487] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.030609] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
- [ 0.033264] meminfo_init: smem ram ptable found: ver: 0 len: 6
- [ 0.033264] Found 2 memory banks grouped into 16 memory regions
- [ 0.033477] gpiochip_add: registered GPIOs 0 to 151 on device: msmgpio
- [ 0.034454] smem_find(137, 80): wrong size 72
- [ 0.034545] socinfo_init: v6, id=109, ver=1.1, raw_id=1817, raw_ver=1817, hw_plat=8, hw_plat_ver=65536
- [ 0.034576] accessory_chip=0 hw_plat_subtype=1
- [ 0.034606] msm_rpm_init: RPM firmware 3.0.16842886
- [ 0.055114] msm_rpm_get_status(): Status id 433 not defined for target
- [ 0.055145] msm_rpm_get_status(): Status id 433 not defined for target
- [ 0.055145] msm_rpm_get_status(): Status id 433 not defined for target
- [ 0.055175] msm_rpm_get_status(): Status id 433 not defined for target
- [ 0.055175] msm_rpm_get_status(): Status id 433 not defined for target
- [ 0.055206] msm_rpm_get_status(): Status id 433 not defined for target
- [ 0.055206] msm_rpm_get_status(): Status id 433 not defined for target
- [ 0.055206] msm_rpm_get_status(): Status id 433 not defined for target
- [ 0.073730] pm8921_probe: PMIC revision 1: F4
- [ 0.073760] pm8921_probe: PMIC revision 2: 06
- [ 0.073760] pm8921_probe: PMIC version: PM8921 rev 3.0
- [ 0.073791] pm8921_probe: PMIC Restart Reason: Triggered from CHG (usb charger insertion)
- [ 0.074951] gpiochip_add: registered GPIOs 152 to 195 on device: pm-gpio
- [ 0.075439] pm_gpio_probe: OK: base=152, ngpio=44
- [ 0.075744] gpiochip_add: registered GPIOs 196 to 207 on device: pm8xxx-mpp
- [ 0.075836] pm8xxx_mpp_probe: OK: base=196, ngpio=12
- [ 0.077941] pm8821_probe: PMIC revision 1: PM8821 rev F3
- [ 0.077972] pm8821_probe: PMIC revision 2: PM8821 rev 0B
- [ 0.077972] pm8821_probe: PMIC version: PM8821 ver 2.1
- [ 0.078582] gpiochip_add: registered GPIOs 208 to 211 on device: pm8xxx-mpp
- [ 0.078613] pm8xxx_mpp_probe: OK: base=208, ngpio=4
- [ 0.079132] gpio_vreg_probe: id=86, name=ext_dsv_load, gpio=86, gpio_label=ext_dsv_load_en
- [ 0.080474] saw_probe: id=0, name=8921_s5
- [ 0.080810] saw_probe: id=1, name=8921_s6
- [ 0.081207] saw_probe: id=2, name=8821_s0
- [ 0.081573] saw_probe: id=3, name=8821_s1
- [ 0.090148] persistent_ram: error in header, 3
- [ 0.090148] persistent_ram: found existing buffer, size 74423, start 74423
- [ 0.356658] console [ram-1] enabled
- [ 0.358184] [NORMAL-DEBUG] apq8064_device_uart_gsbi4.id : 0
- [ 0.358306] [DEBUG] uart_enable : 1
- [ 0.360870] [Touch D] apq8064_init_input: NOT DCM KDDI, reg synaptics driver
- [ 0.361297] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.361480] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.364746] sps:BAM 0x12244000 enabled: ver:0x5, number of pipes:20
- [ 0.364959] sps:BAM 0x12244000 is registered.
- [ 0.365570] sps:sps is ready.
- [ 0.394805] bio: create slab <bio-0> at 0
- [ 0.395690] ION heap vmalloc created
- [ 0.395843] ION heap mm created at a0000000 with size 5c00000
- [ 0.396057] ION heap mm_fw created at 9fe00000 with size 1e0000
- [ 0.396179] ION heap mfc created at a5c00000 with size 2000
- [ 0.396392] ION heap iommu created
- [ 0.396545] ION heap qsecom created at fe109000 with size 780000
- [ 0.396759] ION heap audio created at fe889000 with size 4cf000
- [ 0.396972] ion_heap_create: Invalid heap type 3
- [ 0.398284] pm8xxx_pwm_probe: OK
- [ 0.399108] SCSI subsystem initialized
- [ 0.399536] sps:BAM 0x28084000 enabled: ver:0x12, number of pipes:31
- [ 0.399719] sps:BAM 0x28084000 is registered.
- [ 0.400695] usbcore: registered new interface driver usbfs
- [ 0.400970] usbcore: registered new interface driver hub
- [ 0.401306] usbcore: registered new device driver usb
- [ 0.401763] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-pwrkey/input/input0
- [ 0.402587] using input dev pmic8xxx_pwrkey for key reset
- [ 0.402984] Linux media interface: v0.10
- [ 0.403228] Linux video capture interface: v2.00
- [ 0.405273] msm_iommu_dev: device vpe mapped at f0400000, with 2 ctx banks
- [ 0.405578] msm_iommu_dev: device mdp0 mapped at f0600000, with 2 ctx banks
- [ 0.405883] msm_iommu_dev: device mdp1 mapped at f0800000, with 2 ctx banks
- [ 0.406097] msm_iommu_dev: device rot mapped at f0a00000, with 2 ctx banks
- [ 0.406402] msm_iommu_dev: device ijpeg mapped at f0c00000, with 2 ctx banks
- [ 0.406616] msm_iommu_dev: device vfe mapped at f0e00000, with 2 ctx banks
- [ 0.406951] msm_iommu_dev: device vcodec_a mapped at f1000000, with 2 ctx banks
- [ 0.407287] msm_iommu_dev: device vcodec_b mapped at f1200000, with 2 ctx banks
- [ 0.407501] msm_iommu_dev: device gfx3d mapped at f1400000, with 3 ctx banks
- [ 0.407806] msm_iommu_dev: device jpegd mapped at f1600000, with 2 ctx banks
- [ 0.408111] msm_iommu_dev: device gfx3d1 mapped at f1800000, with 3 ctx banks
- [ 0.408325] msm_iommu_dev: device vcap mapped at f1a00000, with 2 ctx banks
- [ 0.408966] msm_iommu_ctx msm_iommu_ctx.2: context vpe_src using bank 0
- [ 0.409240] msm_iommu_ctx msm_iommu_ctx.3: context vpe_dst using bank 1
- [ 0.409606] msm_iommu_ctx msm_iommu_ctx.4: context mdp_port0_cb0 using bank 0
- [ 0.410003] msm_iommu_ctx msm_iommu_ctx.5: context mdp_port0_cb1 using bank 1
- [ 0.410308] msm_iommu_ctx msm_iommu_ctx.6: context mdp_port1_cb0 using bank 0
- [ 0.410675] msm_iommu_ctx msm_iommu_ctx.7: context mdp_port1_cb1 using bank 1
- [ 0.411071] msm_iommu_ctx msm_iommu_ctx.8: context rot_src using bank 0
- [ 0.411346] msm_iommu_ctx msm_iommu_ctx.9: context rot_dst using bank 1
- [ 0.411712] msm_iommu_ctx msm_iommu_ctx.10: context ijpeg_src using bank 0
- [ 0.411987] msm_iommu_ctx msm_iommu_ctx.11: context ijpeg_dst using bank 1
- [ 0.412384] msm_iommu_ctx msm_iommu_ctx.12: context vfe_imgwr using bank 0
- [ 0.412750] msm_iommu_ctx msm_iommu_ctx.13: context vfe_misc using bank 1
- [ 0.413024] msm_iommu_ctx msm_iommu_ctx.14: context vcodec_a_stream using bank 0
- [ 0.413452] msm_iommu_ctx msm_iommu_ctx.15: context vcodec_a_mm1 using bank 1
- [ 0.413787] msm_iommu_ctx msm_iommu_ctx.16: context vcodec_b_mm2 using bank 0
- [ 0.414215] msm_iommu_ctx msm_iommu_ctx.17: context gfx3d_user using bank 0
- [ 0.414611] msm_iommu_ctx msm_iommu_ctx.18: context gfx3d_priv using bank 1
- [ 0.414916] msm_iommu_ctx msm_iommu_ctx.0: context jpegd_src using bank 0
- [ 0.415283] msm_iommu_ctx msm_iommu_ctx.1: context jpegd_dst using bank 1
- [ 0.415710] msm_iommu_ctx msm_iommu_ctx.19: context gfx3d1_user using bank 0
- [ 0.416046] msm_iommu_ctx msm_iommu_ctx.20: context gfx3d1_priv using bank 1
- [ 0.416442] msm_iommu_ctx msm_iommu_ctx.21: context vcap_vc using bank 0
- [ 0.416748] msm_iommu_ctx msm_iommu_ctx.22: context vcap_vp using bank 1
- [ 0.417083] Advanced Linux Sound Architecture Driver Version 1.0.25.
- [ 0.417816] Bluetooth: Core ver 2.16
- [ 0.417999] NET: Registered protocol family 31
- [ 0.418090] Bluetooth: HCI device and connection manager initialized
- [ 0.418304] Bluetooth: HCI socket layer initialized
- [ 0.418426] Bluetooth: L2CAP socket layer initialized
- [ 0.418914] Bluetooth: SCO socket layer initialized
- [ 0.419342] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.419555] cfg80211: World regulatory domain updated:
- [ 0.419677] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 0.419891] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 0.420074] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 0.420196] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 0.420379] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 0.420593] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 0.421356] earjack debugger probed
- [ 0.422546] Switching to clocksource gp_timer
- [ 0.461730] NET: Registered protocol family 2
- [ 0.462097] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.462890] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.464355] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.465118] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.465332] TCP: reno registered
- [ 0.465454] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.465667] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.466125] NET: Registered protocol family 1
- [ 0.466644] Trying to unpack rootfs image as initramfs...
- [ 0.517333] Freeing initrd memory: 780K
- [ 0.519378] Detected 5 counters on the L2CC PMU.
- [ 0.521667] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot
- [ 0.523529] pil_riva pil_riva: using secure boot
- [ 0.526702] pil_dsps pil_dsps: using secure boot
- [ 0.528228] pil_gss pil_gss: using secure boot
- [ 0.530761] smd_channel_probe_worker: allocation table not initialized
- [ 0.536773] msm_dsps driver version 4.03.
- [ 0.538330] NET: Registered protocol family 27
- [ 0.541595] lpass_fatal_init: lpass SSR driver init'ed.
- [ 0.541870] wcnss_8960: module initialized
- [ 0.542358] gss_8064_init: gss fatal driver init'ed.
- [ 0.543029] acpuclk-8064 acpuclk-8064: SPEED BIN: 0
- [ 0.543151] acpuclk-8064 acpuclk-8064: ACPU PVS: 3
- [ 0.545623] acpuclk-8064 acpuclk-8064: CPU Frequencies Supported: 12
- [ 0.546783] kcal_ctrl_init
- [ 0.548126] msm_rpm_log_probe: OK
- [ 0.550842] usbcore: registered new interface driver hsic_sysmon
- [ 0.555053] audit: initializing netlink socket (disabled)
- [ 0.555175] type=2000 audit(0.550:1): initialized
- [ 0.555969] highmem bounce pool size: 64 pages
- [ 0.561431] fuse init (API version 7.18)
- [ 0.563781] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
- [ 0.563903] io scheduler noop registered
- [ 0.563995] io scheduler deadline registered
- [ 0.564117] io scheduler row registered (default)
- [ 0.564208] io scheduler cfq registered
- [ 0.564453] io scheduler bfq registered
- [ 0.564575] BFQ I/O-scheduler: v7r8
- [ 0.564941] lm3530 probed
- [ 0.566406] mipi_dsi base phy_addr = 0x4700000 virt = 0xf1d00000
- [ 0.566558] mmss_sfpb base phy_addr = 0x5700000,virt = 0xf0140000
- [ 0.566955] mipi_lgit_lcd_probe start
- [ 0.567077] setting pdata->panel_info.fb_num to 3. type: 8
- [ 0.567260] cont_splash_clk_ctrl: dsi_esc_clk - clk_set_rate failed
- [ 0.574554] FrameBuffer[0] 768x1280 size=11796480 bytes is registered successfully!
- [ 0.574676] load_565rle_image: Can not open /initlogo.rle
- [ 0.575836] setting pdata->panel_info.fb_num to 1. type: 7
- [ 0.576507] FrameBuffer[1] 1920x1080 size=0 bytes is registered successfully!
- [ 0.576690] load_565rle_image: Can not open /initlogo.rle
- [ 0.576965] mdp4_dtv_vsync_init: ndx=0
- [ 0.577178] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group eeb9bc08
- [ 0.577270] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled
- [ 0.577697] setting pdata->panel_info.fb_num to 1. type: 10
- [ 0.577941] Inside writeback_driver_init
- [ 0.578124] Inside writeback_probe
- [ 0.578613] FrameBuffer[2] 1280x720 size=0 bytes is registered successfully!
- [ 0.578735] load_565rle_image: Can not open /initlogo.rle
- [ 0.579589]
- [ 0.579589] msm_vidc_enc: Inside vid_enc_init()
- [ 0.579895]
- [ 0.579895] msm_vidc_enc: Inside vid_enc_vcd_init()
- [ 0.580505] smux_init: unable to create log context
- [ 0.581024] msm_serial_hs module loaded
- [ 0.581207] msm_serial_hsl: detected port #0
- [ 0.581359] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16340000 (irq = 184) is a MSM
- [ 0.581481] msm_serial_hsl: console setup on port #0
- [ 0.581726] console [ttyHSL0] enabled
- [ 0.581939] msm_serial_hsl: driver initialized
- [ 0.582977] msm_rotator_probe: rotator_hw_revision=2
- [ 0.584899] diagchar initialized now
- [ 0.585754] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
- [ 0.591674] brd: module loaded
- [ 0.593872] loop: module loaded
- [ 0.594726] anx7808 init gpio
- [ 0.632904] anx7808 dvdd is already on
- [ 0.663299] sp_tx_hardware_poweron: anx7808 power on
- [ 0.664062] ANX7808 is found.
- [ 0.665313] 3.3V output disabled
- [ 0.723327] sp_tx_hardware_powerdown: anx7808 power down
- [ 0.723419] SP_TX To System State:
- [ 0.723541] STATE_CABLE_PLUG
- [ 0.723968] tabla2x-slim tabla2x-slim: Platform data from board file
- [ 0.789489] wcd9xxx_check_codec_type: codec is tabla_codec
- [ 0.789611] wcd9xxx_check_codec_type: Read codec idbytes & version
- [ 0.789611] byte_0[00000002] byte_1[00000000] byte_2[00000000]
- [ 0.789611] byte_3[00000001] version = 2
- [ 0.790557] i2c-core: driver [tabla-i2c-core] using legacy suspend method
- [ 0.790710] i2c-core: driver [tabla-i2c-core] using legacy resume method
- [ 0.791168] bcm2079x-i2c 0-a1fa: bcm2079x_probe, probing bcm2079x driver flags = 10
- [ 0.791381] bcm2079x-i2c 0-a1fa: requesting IRQ 317
- [ 0.791564] bcm2079x-i2c 0-a1fa: bcm2079x_probe, probing bcm2079x driver exited successfully
- [ 0.791900] SCSI Media Changer driver v0.25
- [ 0.792510] tun: Universal TUN/TAP device driver, 1.6
- [ 0.792602] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.792785] rmnet_init: BAM devices[8]
- [ 0.799560] PPP generic driver version 2.4.2
- [ 0.799713] PPP BSD Compression module registered
- [ 0.799835] PPP Deflate Compression module registered
- [ 0.800201] PPP MPPE Compression module registered
- [ 0.800323] NET: Registered protocol family 24
- [ 0.800415] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
- [ 0.800567] CSLIP: code copyright 1989 Regents of the University of California.
- [ 0.800750] wcnss_wlan probed in built-in mode
- [ 0.801208] usbcore: registered new interface driver asix
- [ 0.801330] usbcore: registered new interface driver cdc_ether
- [ 0.801483] usbcore: registered new interface driver net1080
- [ 0.801574] usbcore: registered new interface driver cdc_subset
- [ 0.801727] usbcore: registered new interface driver zaurus
- [ 0.801910] usbcore: registered new interface driver cdc_ncm
- [ 0.802581] msm_otg msm_otg: msm_otg probe
- [ 0.802703] msm_otg msm_otg: failed to get phy_clk
- [ 0.802856] msm_otg msm_otg: OTG regs = f0174000
- [ 0.805145] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.805725] usbcore: registered new interface driver cdc_acm
- [ 0.805816] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 0.805938] Initializing USB Mass Storage driver...
- [ 0.806030] usbcore: registered new interface driver usb-storage
- [ 0.806152] USB Mass Storage support registered.
- [ 0.806243] usbcore: registered new interface driver ums-alauda
- [ 0.806396] usbcore: registered new interface driver ums-cypress
- [ 0.806488] usbcore: registered new interface driver ums-datafab
- [ 0.806640] usbcore: registered new interface driver ums-freecom
- [ 0.806732] usbcore: registered new interface driver ums-isd200
- [ 0.806884] usbcore: registered new interface driver ums-jumpshot
- [ 0.806976] usbcore: registered new interface driver ums-karma
- [ 0.807128] usbcore: registered new interface driver ums-onetouch
- [ 0.807281] usbcore: registered new interface driver ums-sddr09
- [ 0.807373] usbcore: registered new interface driver ums-sddr55
- [ 0.807495] usbcore: registered new interface driver ums-usbat
- [ 0.807647] usbcore: registered new interface driver usbserial
- [ 0.807769] usbserial: USB Serial Driver core
- [ 0.807861] usbcore: registered new interface driver qc_csvt
- [ 0.807952] USB Serial support registered for qc_csvt
- [ 0.808044] usbcore: registered new interface driver usb_ehset_test
- [ 0.808135] usbcore: registered new interface driver diag_bridge
- [ 0.808380] usbcore: registered new interface driver mdm_bridge
- [ 0.808959] usbcore: registered new interface driver ks_bridge
- [ 0.809020] ksb_init: init done
- [ 0.809265] msm_otg msm_otg: phy_reset: success
- [ 0.809753] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
- [ 0.809936] mbim_init: initialize 1 instances
- [ 0.810119] mbim_init: Initialized 1 ports
- [ 0.811187] rndis_qc_init: initialize rndis QC instance
- [ 0.811462] android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 0.811584] android_usb gadget: Number of LUNs=1
- [ 0.811676] lun0: LUN: removable file: (no medium)
- [ 0.812011] android_usb gadget: android_usb ready
- [ 0.812896] input: keypad_8064 as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-keypad/input/input1
- [ 0.813476] [Touch D]touch enable
- [ 1.044982] [Touch] common[1] finger[17] flash[52] button[0]
- [ 1.045989] [Touch] IC is 7020, H pattern, panel is G2, Firmware: E094.
- [ 1.047698] input: touch_dev as /devices/virtual/input/input2
- [ 1.048004] [Touch] fw_rev[0:0] product_id[TM2000:TM2000] force_upgrade[0]
- [ 1.048034] [Touch] Touch driver is initialized
- [ 1.048217] [Touch] 7020 G2 H pattern FW-upgrade is executed
- [ 1.048370] [Touch] F/W upgrade - Start
- [ 1.048431] [Touch] fw_image_confid_id = E129
- [ 1.048522] [Touch] CompleteReflash_Lockdown
- [ 1.048645] [Touch] SynaInitialize
- [ 1.048797] [Touch]
- [ 1.048797] Initializing Reflash Process...
- [ 1.048889] using rtc device, pm8xxx_rtc, for alarms
- [ 1.048919] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
- [ 1.049102] i2c /dev entries driver
- [ 1.049499] [Touch] SynaSetup
- [ 1.049896] __jrchoi: msm_sensor_init_module: E
- [ 1.050415] [Touch] SynaReadConfigInfo
- [ 1.050537] [Touch]
- [ 1.050537] Read Config Info
- [ 1.051086] [Touch] SynaReadFirmwareInfo
- [ 1.051300] [Touch]
- [ 1.051330] Read Firmware Info
- [ 1.051849] [Touch] SynaEnableFlashing
- [ 1.052001] [Touch]
- [ 1.052001] Enable Reflash...
- [ 1.052276] [Touch] SynaReadBootloadID
- [ 1.052581] [Touch] SynaWriteBootloadID
- [ 1.077850] msm_eeprom_probe probe_fail
- [ 1.078216] msm_server_update_sensor_info mctl_node_name[0] = video1
- [ 1.105712] msm_eeprom_probe probe_fail
- [ 1.106018] msm_server_update_sensor_info mctl_node_name[1] = video3
- [ 1.108398] msm_cam_server_request_irq IRQ Router hw is not present.
- [ 1.108825] lm3559_init
- [ 1.109374] usbcore: registered new interface driver uvcvideo
- [ 1.109527] USB Video Class driver (1.1.1)
- [ 1.131622] pm8xxx_tm_probe: OK
- [ 1.131958] pm8xxx_tm_probe: OK
- [ 1.132507] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- [ 1.137664] cpuidle: using governor ladder
- [ 1.137786] cpuidle: using governor menu
- [ 1.138092] mmc0: SDCC Version: 0x0000001a
- [ 1.139160] mmc0: bam physical base=0x12402000
- [ 1.139312] mmc0: bam virtual base=0xf01ac000
- [ 1.139373] sps:BAM 0x12402000 is registered.
- [ 1.139465] mmc0: BAM device registered. bam_handle=0xeedd4200
- [ 1.139739] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- [ 1.140136] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130
- [ 1.140289] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800
- [ 1.140472] mmc0: No card detect facilities available
- [ 1.142150] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1
- [ 1.142272] mmc0: Controller capabilities: 0x0000039e
- [ 1.142364] mmc0: 8 bit data mode enabled
- [ 1.142486] mmc0: 4 bit data mode disabled
- [ 1.142547] mmc0: polling status mode disabled
- [ 1.142639] mmc0: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz
- [ 1.142761] mmc0: Slot eject status = 0
- [ 1.142852] mmc0: Power save feature enable = 1
- [ 1.142974] mmc0: SPS-BAM data transfer mode available
- [ 1.143371] usbcore: registered new interface driver usbhid
- [ 1.143493] usbhid: USB HID core driver
- [ 1.143981] ashmem: initialized
- [ 1.144378] usbcore: registered new interface driver snd-usb-audio
- [ 1.145202] tabla_probe
- [ 1.145660] amp_enable: amp enable bypass(2)
- [ 1.145751] amp_enable: AMP_EN is set to 0
- [ 1.146331] msm_pcm_probe: dev name msm-voip-dsp
- [ 1.146575] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback sdline 0 capture sdline 8
- [ 1.146697] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback ch_max 0 capture ch_mx 8
- [ 1.147399] msm_pcm_probe: dev name msm-pcm-dsp
- [ 1.147613] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
- [ 1.147918] msm_pcm_probe: dev name msm-lowlatency-pcm-dsp
- [ 1.147979] adding pm_qos request in low latency driver
- [ 1.148101] done adding pm_qos request in low latency driver
- [ 1.148651] msm_compr_probe: dev name msm-compr-dsp
- [ 1.149078] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
- [ 1.149658] msm8930_audio_init: Not the right machine type
- [ 1.149780] msm_audio_init: Not the right machine type
- [ 1.149871] msm_audio_init: Not APQ8064 in I2S mode
- [ 1.159149] [Touch] SynaSetup
- [ 1.231964] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
- [ 1.232482] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
- [ 1.233032] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
- [ 1.233489] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
- [ 1.234008] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
- [ 1.234497] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
- [ 1.235015] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
- [ 1.235504] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
- [ 1.235961] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
- [ 1.236480] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
- [ 1.236968] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
- [ 1.237457] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok
- [ 1.237915] asoc: snd-soc-dummy-dai <-> VOICE_STUB mapping ok
- [ 1.238433] asoc: snd-soc-dummy-dai <-> VoLTE mapping ok
- [ 1.238891] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
- [ 1.239654] asoc: tabla_rx1 <-> msm-dai-q6.16384 mapping ok
- [ 1.242401] asoc: tabla_tx1 <-> msm-dai-q6.16385 mapping ok
- [ 1.242858] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok
- [ 1.243316] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok
- [ 1.243743] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok
- [ 1.244110] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok
- [ 1.244567] asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok
- [ 1.244903] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
- [ 1.245361] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
- [ 1.245697] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok
- [ 1.246154] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok
- [ 1.246520] asoc: tabla_rx2 <-> msm-dai-stub mapping ok
- [ 1.246978] asoc: tabla_tx1 <-> msm-dai-stub mapping ok
- [ 1.247314] asoc: msm-stub-rx <-> msm-dai-q6.16386 mapping ok
- [ 1.247711] asoc: msm-stub-tx <-> msm-dai-q6.16387 mapping ok
- [ 1.248138] asoc: tabla_tx2 <-> msm-dai-q6.16389 mapping ok
- [ 1.248504] asoc: tabla_rx3 <-> msm-dai-q6.16388 mapping ok
- [ 1.248901] asoc: msm-stub-rx <-> msm-dai-q6.16392 mapping ok
- [ 1.249298] asoc: msm-stub-tx <-> msm-dai-q6.16393 mapping ok
- [ 1.249694] asoc: tabla_tx3 <-> msm-dai-stub mapping ok
- [ 1.250061] asoc: msm-stub-rx <-> msm-dai-q6.16390 mapping ok
- [ 1.250518] asoc: msm-stub-tx <-> msm-dai-q6.16391 mapping ok
- [ 1.251922] input: apq8064-tabla-snd-card Button Jack as /devices/platform/soc-audio.0/sound/card0/input3
- [ 1.252258] input: apq8064-tabla-snd-card Headset Jack as /devices/platform/soc-audio.0/sound/card0/input4
- [ 1.255004] oprofile: using arm/armv7-krait
- [ 1.255249] u32 classifier
- [ 1.255340] Actions configured
- [ 1.255401] Netfilter messages via NETLINK v0.30.
- [ 1.255615] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 1.256225] ctnetlink v0.93: registering with nfnetlink.
- [ 1.256408] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 1.256500] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 1.256866] xt_time: kernel timezone is -0000
- [ 1.257263] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 1.257568] arp_tables: (C) 2002 David S. Miller
- [ 1.257720] TCP: cubic registered
- [ 1.257781] Initializing XFRM netlink socket
- [ 1.258422] NET: Registered protocol family 10
- [ 1.261413] Mobile IPv6
- [ 1.261535] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 1.261840] IPv6 over IPv4 tunneling driver
- [ 1.262420] NET: Registered protocol family 17
- [ 1.262512] NET: Registered protocol family 15
- [ 1.262817] Bluetooth: RFCOMM TTY layer initialized
- [ 1.262908] Bluetooth: RFCOMM socket layer initialized
- [ 1.263061] Bluetooth: RFCOMM ver 1.11
- [ 1.263183] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 1.263275] Bluetooth: BNEP filters: protocol multicast
- [ 1.263427] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 1.263519] L2TP core driver, V2.0
- [ 1.263702] PPPoL2TP kernel driver, V2.0
- [ 1.264373] VFP support v0.3: implementor 51 architecture 64 part 6f variant 0 rev 2
- [ 1.264648] Registering SWP/SWPB emulation handler
- [ 1.264709] clock_late_init: Removing enables held for handed-off clocks
- [ 1.269104] MSM Watchdog Initialized
- [ 1.279968] registered taskstats version 1
- [ 1.281768] mmc0: new HS200 MMC card at address 0001
- [ 1.282287] mmcblk0: mmc0:0001 008G92 7.28 GiB
- [ 1.282623] read_ocv_trim: program rev reg is 0x32
- [ 1.282836] read_ocv_trim: trim reg is 0x42
- [ 1.282897] read_ocv_trim: trim delta is 7
- [ 1.283050] pm8921_is_usb_chg_plugged_in: called before init
- [ 1.285827] pm8921_is_usb_chg_plugged_in: called before init
- [ 1.287292] Alternate GPT is invalid, using primary GPT.
- [ 1.287353] pm8921_is_usb_chg_plugged_in: called before init
- [ 1.287475] ocv_ir_compensation: comp ocv = 3872969, ocv = 3863947, ibatt_ua = 41200, rbatt_mohm = 219
- [ 1.287658] calculate_unusable_charge_uah: Using shutdown_iavg_ma = 500 in all samples
- [ 1.287658] pm8921_is_batfet_closed: called before init
- [ 1.287963] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25
- [ 1.313232] pm8921_is_usb_chg_plugged_in: called before init
- [ 1.313415] adjust_soc: ibat_ua = 493600, vbat_uv = 3738496, soc = 53, batt_temp=350
- [ 1.315795] pm8921_get_batt_state: called before init
- [ 1.315887] pm8921_bms_probe: OK battery_capacity_at_boot=53 volt = 3747360 ocv = 3872475
- [ 1.316955] power_supply usb: driver failed to report `present' property: 4294967274
- [ 1.317077] power_supply usb: driver failed to report `present' property: 4294967274
- [ 1.317321] power_supply pm8921-dc: driver failed to report `present' property: 4294967274
- [ 1.317535] power_supply pm8921-dc: driver failed to report `present' property: 4294967274
- [ 1.319000] pm8921_get_batt_state: called before init
- [ 1.321411] pm8921_get_batt_state: called before init
- [ 1.328399] wlc: bq51051b_wlc_probe: probe
- [ 1.328857] wlc: bq51051b_wlc_hw_init: hw_init
- [ 1.329193] power_supply wireless: driver failed to report `present' property: 4294967274
- [ 1.329528] power_supply wireless: driver failed to report `present' property: 4294967274
- [ 1.330139] batt_temp_ctrl_init
- [ 1.330322] batt_temp_ctrl_probe
- [ 1.330749] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2016-02-25 00:10:40 UTC (1456359040)
- [ 1.332214] android_vibrator: default amplitude 88
- [ 1.332336] android vibrator probed
- [ 1.332580] fsa8008 init
- [ 1.332885] fsa8008 probe
- [ 1.333587] input: hs_detect as /devices/virtual/input/input5
- [ 1.333862] ALSA device list:
- [ 1.333923] #0: apq8064-tabla-snd-card
- [ 1.334259] Freeing init memory: 96K
- [ 1.335815] init: init started!
- [ 1.339447] SELinux: Android master kernel running Android M policy in compatibility mode.
- [ 1.409698] type=1403 audit(1456359040.570:2): policy loaded auid=4294967295 ses=4294967295
- [ 1.410125] type=1404 audit(1456359040.570:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
- [ 1.453491] msm_otg msm_otg: chg_type = USB_SDP_CHARGER
- [ 1.453643] msm_otg msm_otg: Avail curr from USB = 500
- [ 1.453948] msm_otg msm_otg: current: 0 -> 500 (mA)
- [ 1.454071] pm_power_set_property_usb: usb_target_ma 0
- [ 1.457458] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
- [ 1.473419] init: (Initializing SELinux enforcing took 0.14s.)
- [ 1.481994] init: init second stage started!
- [ 1.571868] init: waitpid failed: No child processes
- [ 1.572326] init: (Loading properties from /default.prop took 0.00s.)
- [ 1.574035] init: (Parsing /init.environ.rc took 0.00s.)
- [ 1.574432] init: (Parsing /init.usb.rc took 0.00s.)
- [ 1.575531] init: (Parsing init.mako.usb.rc took 0.00s.)
- [ 1.575714] init: could not import file 'init.mako_svelte.rc' from '/init.mako.rc'
- [ 1.575866] init: could not import file 'init.mako_tiny.rc' from '/init.mako.rc'
- [ 1.575958] init: (Parsing /init.mako.rc took 0.00s.)
- [ 1.576507] init: (Parsing /init.usb.configfs.rc took 0.00s.)
- [ 1.576660] init: (Parsing /init.zygote32.rc took 0.00s.)
- [ 1.576904] init: (Parsing /init.trace.rc took 0.00s.)
- [ 1.577301] init: /init.cm.rc: 139: ignored duplicate definition of service 'bugreport'
- [ 1.577545] init: (Parsing /init.superuser.rc took 0.00s.)
- [ 1.577636] init: (Parsing /init.cm.rc took 0.00s.)
- [ 1.577789] init: (Parsing /init.rc took 0.00s.)
- [ 1.578002] init: SELinux: Could not get canonical path /adb_keys restorecon: No such file or directory.
- [ 1.578216] init: Starting service 'ueventd'...
- [ 1.578735] init: Waiting for /dev/.coldboot_done...
- [ 1.579803] ueventd: ueventd started!
- [ 1.824737] type=1400 audit(1456359040.990:4): avc: denied { write } for pid=155 comm="ueventd" name="uevent" dev="sysfs" ino=2702 scontext=u:r:ueventd:s0 tcontext=u:object_r:sysfs_hardware:s0 tclass=file permissive=0
- [ 1.853668] type=1400 audit(1456359041.020:5): avc: denied { write } for pid=155 comm="ueventd" name="uevent" dev="sysfs" ino=9459 scontext=u:r:ueventd:s0 tcontext=u:object_r:sysfs_hardware:s0 tclass=file permissive=0
- [ 1.971527] ueventd: Coldboot took 0.38s.
- [ 1.972900] init: Waiting for /dev/.coldboot_done took 0.39s.
- [ 2.043548] unplug_check_worker: Stopping Unplug Check Worker USB == 500mA
- [ 2.102478] keychord: using input dev pmic8xxx_pwrkey for fevent
- [ 2.102600] keychord: using input dev keypad_8064 for fevent
- [ 2.109100] init: write_file: Unable to open '/proc/sys/kernel/hung_task_timeout_secs': No such file or directory
- [ 2.109374] init: write_file: Unable to open '/proc/sys/kernel/sched_tunable_scaling': No such file or directory
- [ 2.109527] init: write_file: Unable to open '/proc/sys/kernel/sched_latency_ns': No such file or directory
- [ 2.109710] init: write_file: Unable to open '/proc/sys/kernel/sched_wakeup_granularity_ns': No such file or directory
- [ 2.109863] init: write_file: Unable to open '/proc/sys/kernel/sched_compat_yield': No such file or directory
- [ 2.111694] init: write_file: Unable to write to '/dev/cpuctl/cpu.shares': Invalid argument
- [ 2.114562] init: write_file: Unable to open '/proc/sys/abi/swp': No such file or directory
- [ 2.117065] init: Starting service 'charger'...
- [ 2.120758] charger:
- [ 2.121246] charger: *************** LAST KMSG ***************
- [ 2.121520] charger:
- [ 2.122894] charger: last_kmsg not found. Cold reset?
- [ 2.123352] init: write_file: Unable to open '/sys/devices/system/cpu/cpufreq/ondemand/up_threshold': No such file or directory
- [ 2.123657] init: write_file: Unable to open '/sys/devices/system/cpu/cpufreq/ondemand/sampling_rate': No such file or directory
- [ 2.123901] init: write_file: Unable to open '/sys/devices/system/cpu/cpufreq/ondemand/io_is_busy': No such file or directory
- [ 2.124114] init: write_file: Unable to open '/sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor': No such file or directory
- [ 2.125244] charger:
- [ 2.125549] charger: ************* END LAST KMSG *************
- [ 2.126098] charger:
- [ 2.126495] charger: --------------- STARTING CHARGER MODE ---------------
- [ 2.168090] init: cannot find '/system/bin/sh', disabling 'console'
- [ 2.243194] healthd: wakealarm_init: timerfd_create failed
- [ 2.279022] type=1400 audit(1456359041.430:6): avc: denied { read } for pid=157 comm="healthd" name="/" dev="tmpfs" ino=7169 scontext=u:r:healthd:s0 tcontext=u:object_r:device:s0 tclass=dir permissive=0
- [ 2.454559] mipi_dsi_controller_cfg: DSI status=8 failed
- [ 2.454681] mipi_dsi_panel_power: mipi lcd function started status = 1
- [ 2.454772] ext_dsv_load: Failed to create debugfs directory
- [ 2.457305] mipi_dsi_panel_power : reset start.
- [ 2.479309] mipi_lgit_lcd_on started
- [ 2.502593] mipi_lgit_lcd_on finished
- [ 2.542388] lm3530_backlight_off, on: 1
- [ 2.593872] mipi_lgit_lcd_off started
- [ 2.723846] mipi_lgit_lcd_off finished
- [ 2.723907] mipi_dsi_panel_power: mipi lcd function started status = 0
- [ 2.730468] lm3530_backlight_off, on: 0
- [ 2.732421] mipi_dsi_panel_power: mipi lcd function started status = 1
- [ 2.734161] mipi_dsi_panel_power : reset start.
- [ 2.756591] mipi_lgit_lcd_on started
- [ 2.814178] mipi_lgit_lcd_on finished
- [ 2.834381] lm3530_backlight_on, ++ lm3530_backlight_on
- [ 2.901397] lm3530_backlight_off, on: 1
- [ 2.964050] mipi_lgit_lcd_off started
- [ 3.093963] mipi_lgit_lcd_off finished
- [ 3.094024] mipi_dsi_panel_power: mipi lcd function started status = 0
- [ 3.101257] lm3530_backlight_off, on: 0
- [ 3.103302] mipi_dsi_panel_power: mipi lcd function started status = 1
- [ 3.105072] mipi_dsi_panel_power : reset start.
- [ 3.126739] mipi_lgit_lcd_on started
- [ 3.184936] mipi_lgit_lcd_on finished
- [ 3.205200] lm3530_backlight_on, ++ lm3530_backlight_on
- [ 13.665771] lm3530_backlight_off, on: 1
- [ 13.724304] mipi_lgit_lcd_off started
- [ 13.854187] mipi_lgit_lcd_off finished
- [ 13.854278] mipi_dsi_panel_power: mipi lcd function started status = 0
- [ 13.861541] lm3530_backlight_off, on: 0
- [ 13.863708] request_suspend_state: wakeup (3->0) at 13859615139 (2016-02-25 00:10:53.020235545 UTC)
- [ 13.865325] request_suspend_state: sleep (0->3) at 13861232572 (2016-02-25 00:10:53.021883495 UTC)
- [ 13.865936] [Touch] early_suspend is not executed
- [ 22.114440] adjust_soc: ibat_ua = -352200, vbat_uv = 3964485, soc = 54, batt_temp=349
- [ 42.114410] adjust_soc: ibat_ua = -354400, vbat_uv = 3970052, soc = 54, batt_temp=349
- [ 46.092071] keyboard reset (delayed 1500ms)
- [ 46.237670] keyboard reset canceled
- [ 46.238555] request_suspend_state: wakeup (3->0) at 46234462552 (2016-02-25 00:11:25.395113475 UTC)
- [ 46.239227] [Touch] late_resume is not executed
- [ 46.239837] mipi_dsi_panel_power: mipi lcd function started status = 1
- [ 46.241638] mipi_dsi_panel_power : reset start.
- [ 46.263061] mipi_lgit_lcd_on started
- [ 46.324554] mipi_lgit_lcd_on finished
- [ 46.345031] lm3530_backlight_on, ++ lm3530_backlight_on
- [ 48.706726] keyboard reset (delayed 1500ms)
- [ 50.204284] keyreset: restarting system
- [ 50.204742] Going down for restart now
- No errors detected
- Boot info:
- Last boot reason: reboot
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement