API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jul 29th, 2013
62
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 13.77 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 3.6.11+ (dc4@dc4-arm-01) (gcc version 4.7.2 20120731 (prerelease) (crosstool-NG linaro-1.13.1+bzr2458 - Linaro GCC 2012.08) ) #474 PREEMPT Thu Jun 13 17:14:42 BST 2013
  4. [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
  5. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  6. [ 0.000000] Machine: BCM2708
  7. [ 0.000000] cma: CMA: reserved 16 MiB at 1d000000
  8. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  9. [ 0.000000] On node 0 totalpages: 122880
  10. [ 0.000000] free_area_init_node: node 0, pgdat c053b854, node_mem_map c05e5000
  11. [ 0.000000] Normal zone: 960 pages used for memmap
  12. [ 0.000000] Normal zone: 0 pages reserved
  13. [ 0.000000] Normal zone: 121920 pages, LIFO batch:31
  14. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  15. [ 0.000000] pcpu-alloc: [0] 0
  16. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920
  17. [ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708.boardrev=0xf bcm2708.serial=0x7696bb24 smsc95xx.macaddr=B8:27:EB:96:BB:24 sdhci-bcm2708.emmc_clock_freq=100000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
  18. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  19. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  20. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  21. [ 0.000000] Memory: 480MB = 480MB total
  22. [ 0.000000] Memory: 464776k/464776k available, 26744k reserved, 0K highmem
  23. [ 0.000000] Virtual kernel memory layout:
  24. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  25. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  26. [ 0.000000] vmalloc : 0xde800000 - 0xff000000 ( 520 MB)
  27. [ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB)
  28. [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  29. [ 0.000000] .text : 0xc0008000 - 0xc04e647c (4986 kB)
  30. [ 0.000000] .init : 0xc04e7000 - 0xc0507f24 ( 132 kB)
  31. [ 0.000000] .data : 0xc0508000 - 0xc053c080 ( 209 kB)
  32. [ 0.000000] .bss : 0xc053c0a4 - 0xc05e4758 ( 674 kB)
  33. [ 0.000000] NR_IRQS:330
  34. [ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
  35. [ 0.000000] Console: colour dummy device 80x30
  36. [ 0.000000] console [tty1] enabled
  37. [ 0.001026] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
  38. [ 0.060128] pid_max: default: 32768 minimum: 301
  39. [ 0.060460] Mount-cache hash table entries: 512
  40. [ 0.061220] Initializing cgroup subsys cpuacct
  41. [ 0.061275] Initializing cgroup subsys devices
  42. [ 0.061309] Initializing cgroup subsys freezer
  43. [ 0.061338] Initializing cgroup subsys blkio
  44. [ 0.061428] CPU: Testing write buffer coherency: ok
  45. [ 0.061762] hw perfevents: enabled with v6 PMU driver, 3 counters available
  46. [ 0.061902] Setting up static identity map for 0x39d698 - 0x39d6f4
  47. [ 0.063397] devtmpfs: initialized
  48. [ 0.074073] NET: Registered protocol family 16
  49. [ 0.080568] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  50. [ 0.081674] bcm2708.uart_clock = 0
  51. [ 0.083076] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  52. [ 0.083130] hw-breakpoint: maximum watchpoint size is 4 bytes.
  53. [ 0.083167] mailbox: Broadcom VideoCore Mailbox driver
  54. [ 0.083260] bcm2708_vcio: mailbox at f200b880
  55. [ 0.083360] bcm_power: Broadcom power driver
  56. [ 0.083400] bcm_power_open() -> 0
  57. [ 0.083425] bcm_power_request(0, 8)
  58. [ 0.584115] bcm_mailbox_read -> 00000080, 0
  59. [ 0.584159] bcm_power_request -> 0
  60. [ 0.584186] Serial: AMBA PL011 UART driver
  61. [ 0.584329] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
  62. [ 0.908168] console [ttyAMA0] enabled
  63. [ 0.931828] bio: create slab <bio-0> at 0
  64. [ 0.936720] SCSI subsystem initialized
  65. [ 0.940818] usbcore: registered new interface driver usbfs
  66. [ 0.946400] usbcore: registered new interface driver hub
  67. [ 0.951998] usbcore: registered new device driver usb
  68. [ 0.958359] Switching to clocksource stc
  69. [ 0.962598] FS-Cache: Loaded
  70. [ 0.965731] CacheFiles: Loaded
  71. [ 0.980523] NET: Registered protocol family 2
  72. [ 0.985806] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  73. [ 0.993552] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  74. [ 1.000344] TCP: Hash tables configured (established 16384 bind 16384)
  75. [ 1.006948] TCP: reno registered
  76. [ 1.010202] UDP hash table entries: 256 (order: 0, 4096 bytes)
  77. [ 1.016099] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  78. [ 1.022681] NET: Registered protocol family 1
  79. [ 1.027552] RPC: Registered named UNIX socket transport module.
  80. [ 1.033596] RPC: Registered udp transport module.
  81. [ 1.038320] RPC: Registered tcp transport module.
  82. [ 1.043069] RPC: Registered tcp NFSv4.1 backchannel transport module.
  83. [ 1.050181] bcm2708_dma: DMA manager at f2007000
  84. [ 1.054974] bcm2708_gpio: bcm2708_gpio_probe c0515d98
  85. [ 1.060444] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
  86. [ 1.069593] audit: initializing netlink socket (disabled)
  87. [ 1.075186] type=2000 audit(0.930:1): initialized
  88. [ 1.197449] VFS: Disk quotas dquot_6.5.2
  89. [ 1.201484] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  90. [ 1.208550] FS-Cache: Netfs 'nfs' registered for caching
  91. [ 1.214302] NFS: Registering the id_resolver key type
  92. [ 1.219484] Key type id_resolver registered
  93. [ 1.223779] Key type id_legacy registered
  94. [ 1.228144] msgmni has been set to 939
  95. [ 1.233669] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  96. [ 1.241380] io scheduler noop registered
  97. [ 1.245427] io scheduler deadline registered (default)
  98. [ 1.250611] io scheduler cfq registered
  99. [ 1.272868] Console: switching to colour frame buffer device 82x26
  100. [ 1.284262] kgdb: Registered I/O driver kgdboc.
  101. [ 1.291335] vc-cma: Videocore CMA driver
  102. [ 1.297225] vc-cma: vc_cma_base = 0x00000000
  103. [ 1.303800] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
  104. [ 1.310955] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
  105. [ 1.327069] brd: module loaded
  106. [ 1.336813] loop: module loaded
  107. [ 1.341960] vchiq: vchiq_init_state: slot_zero = 0xdd000000, is_master = 0
  108. [ 1.351343] Loading iSCSI transport class v2.0-870.
  109. [ 1.358990] usbcore: registered new interface driver smsc95xx
  110. [ 1.366787] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  111. [ 1.579430] Core Release: 2.80a
  112. [ 1.584339] Setting default values for core params
  113. [ 1.590841] Finished setting default values for core params
  114. [ 1.803245] Using Buffer DMA mode
  115. [ 1.808242] Periodic Transfer Interrupt Enhancement - disabled
  116. [ 1.815760] Multiprocessor Interrupt Enhancement - disabled
  117. [ 1.823035] OTG VER PARAM: 0, OTG VER FLAG: 0
  118. [ 1.829074] Dedicated Tx FIFOs mode
  119. [ 1.835240] dwc_otg: Microframe scheduler enabled
  120. [ 1.835651] dwc_otg bcm2708_usb: DWC OTG Controller
  121. [ 1.842316] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
  122. [ 1.851398] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
  123. [ 1.858744] Init: Port Power? op_state=1
  124. [ 1.864399] Init: Power Port (0)
  125. [ 1.869412] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  126. [ 1.878067] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  127. [ 1.887161] usb usb1: Product: DWC OTG Controller
  128. [ 1.893734] usb usb1: Manufacturer: Linux 3.6.11+ dwc_otg_hcd
  129. [ 1.901302] usb usb1: SerialNumber: bcm2708_usb
  130. [ 1.908399] hub 1-0:1.0: USB hub found
  131. [ 1.914022] hub 1-0:1.0: 1 port detected
  132. [ 1.919990] dwc_otg: FIQ enabled
  133. [ 1.920007] dwc_otg: NAK holdoff enabled
  134. [ 1.920029] Module dwc_common_port init
  135. [ 1.920245] Initializing USB Mass Storage driver...
  136. [ 1.927142] usbcore: registered new interface driver usb-storage
  137. [ 1.934946] USB Mass Storage support registered.
  138. [ 1.941429] usbcore: registered new interface driver libusual
  139. [ 1.949250] mousedev: PS/2 mouse device common for all mice
  140. [ 1.957362] bcm2835-cpufreq: min=700000 max=1000000 cur=700000
  141. [ 1.965126] bcm2835-cpufreq: switching to governor powersave
  142. [ 1.972556] bcm2835-cpufreq: switching to governor powersave
  143. [ 1.979888] cpuidle: using governor ladder
  144. [ 1.985654] cpuidle: using governor menu
  145. [ 1.991223] sdhci: Secure Digital Host Controller Interface driver
  146. [ 1.999076] sdhci: Copyright(c) Pierre Ossman
  147. [ 2.005158] sdhci: Enable low-latency mode
  148. [ 2.052687] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
  149. [ 2.063974] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
  150. [ 2.073767] sdhci-pltfm: SDHCI platform and OF driver helper
  151. [ 2.086970] usbcore: registered new interface driver usbhid
  152. [ 2.094427] usbhid: USB HID core driver
  153. [ 2.104819] TCP: cubic registered
  154. [ 2.112050] Initializing XFRM netlink socket
  155. [ 2.120323] Indeed it is in host mode hprt0 = 00021501
  156. [ 2.127375] NET: Registered protocol family 17
  157. [ 2.142654] Key type dns_resolver registered
  158. [ 2.152854] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
  159. [ 2.174708] mmc0: read SD Status register (SSR) after 2 attempts
  160. [ 2.193211] registered taskstats version 1
  161. [ 2.200246] Waiting for root device /dev/mmcblk0p2...
  162. [ 2.209464] mmc0: new high speed SDHC card at address b368
  163. [ 2.232523] mmcblk0: mmc0:b368 USD 14.9 GiB
  164. [ 2.240455] mmcblk0: p1 p2
  165. [ 2.372606] usb 1-1: new high-speed USB device number 2 using dwc_otg
  166. [ 2.381506] Indeed it is in host mode hprt0 = 00001101
  167. [ 2.602769] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
  168. [ 2.611491] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  169. [ 2.621333] hub 1-1:1.0: USB hub found
  170. [ 2.627168] hub 1-1:1.0: 3 ports detected
  171. [ 2.912563] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  172. [ 3.032880] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  173. [ 3.041764] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  174. [ 3.053998] smsc95xx v1.0.4
  175. [ 3.117204] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:96:bb:24
  176. [ 3.212635] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
  177. [ 3.334530] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=8176
  178. [ 3.343541] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  179. [ 3.352932] usb 1-1.2: Manufacturer: Realtek
  180. [ 3.359166] usb 1-1.2: SerialNumber: 00e04c000001
  181. [ 6.187966] EXT4-fs (mmcblk0p2): recovery complete
  182. [ 6.758625] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  183. [ 6.770918] VFS: Mounted root (ext4 filesystem) on device 179:2.
  184. [ 6.780335] devtmpfs: mounted
  185. [ 6.785854] Freeing init memory: 128K
  186. [ 8.100286] udevd[155]: starting version 175
  187. [ 9.279911] Registered led device: led0
  188. [ 10.518974] usbcore: registered new interface driver rtl8192cu
  189. [ 15.981127] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  190. [ 16.441043] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  191. [ 25.108233] usb 1-1.2: USB disconnect, device number 4
  192. [ 25.112582] ------------[ cut here ]------------
  193. [ 25.112654] WARNING: at fs/proc/generic.c:849 remove_proc_entry+0x280/0x2a0()
  194. [ 25.112669] remove_proc_entry: removing non-empty directory 'rtl819xC/wlan0', leaking at least 'ampdu_enable'
  195. [ 25.112677] Modules linked in: snd_bcm2835 snd_pcm snd_seq snd_timer snd_seq_device snd snd_page_alloc 8192cu leds_gpio led_class
  196. [ 25.112763] [<c0013a7c>] (unwind_backtrace+0x0/0xf0) from [<c001e2b4>] (warn_slowpath_common+0x4c/0x64)
  197. [ 25.112790] [<c001e2b4>] (warn_slowpath_common+0x4c/0x64) from [<c001e360>] (warn_slowpath_fmt+0x30/0x40)
  198. [ 25.112819] [<c001e360>] (warn_slowpath_fmt+0x30/0x40) from [<c011822c>] (remove_proc_entry+0x280/0x2a0)
  199. [ 25.113278] [<c011822c>] (remove_proc_entry+0x280/0x2a0) from [<bf044748>] (rtw_proc_remove_one+0xf4/0x188 [8192cu])
  200. [ 25.113844] [<bf044748>] (rtw_proc_remove_one+0xf4/0x188 [8192cu]) from [<bf0456bc>] (rtw_dev_remove+0x94/0x134 [8192cu])
  201. [ 25.114148] [<bf0456bc>] (rtw_dev_remove+0x94/0x134 [8192cu]) from [<c0277b94>] (usb_unbind_interface+0x48/0x108)
  202. [ 25.114180] [<c0277b94>] (usb_unbind_interface+0x48/0x108) from [<c02371b0>] (__device_release_driver+0x58/0xb0)
  203. [ 25.114203] [<c02371b0>] (__device_release_driver+0x58/0xb0) from [<c0237224>] (device_release_driver+0x1c/0x28)
  204. [ 25.114225] [<c0237224>] (device_release_driver+0x1c/0x28) from [<c0236d2c>] (bus_remove_device+0xc4/0xe4)
  205. [ 25.114258] [<c0236d2c>] (bus_remove_device+0xc4/0xe4) from [<c0234ecc>] (device_del+0xf8/0x17c)
  206. [ 25.114282] [<c0234ecc>] (device_del+0xf8/0x17c) from [<c0276270>] (usb_disable_device+0xa0/0x1c8)
  207. [ 25.114317] [<c0276270>] (usb_disable_device+0xa0/0x1c8) from [<c026f510>] (usb_disconnect+0x7c/0x124)
  208. [ 25.114342] [<c026f510>] (usb_disconnect+0x7c/0x124) from [<c02703cc>] (hub_thread+0x31c/0x10d4)
  209. [ 25.114379] [<c02703cc>] (hub_thread+0x31c/0x10d4) from [<c003a7b4>] (kthread+0x88/0x94)
  210. [ 25.114414] [<c003a7b4>] (kthread+0x88/0x94) from [<c000e9fc>] (kernel_thread_exit+0x0/0x8)
  211. [ 25.114427] ---[ end trace 6fe9411488a6d71e ]---
  212. [ 26.613354] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
  213. [ 28.075867] bcm2835-cpufreq: switching to governor ondemand
  214. [ 28.075897] bcm2835-cpufreq: switching to governor ondemand
  215. [ 30.505661] Adding 102396k swap on /var/swap. Priority:-1 extents:1 across:102396k SS
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!