API tools faq
paste
Guest User

Untitled

a guest
Jan 14th, 2016
126
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 16.88 KB | None | 0 0
raw download clone embed print report
  1. KOELSCH SPI_LOADER(DDR3) V0.15 2014.06.13
  2. DEVICE S25FL512
  3.  
  4.  
  5. U-Boot 2013.01.01-g3883ee7 (Aug 25 2014 - 19:04:54)
  6.  
  7. CPU: Renesas Electronics R8A7791 rev 3.0
  8. Board: Koelsch Board
  9.  
  10. DRAM: 1 GiB
  11. MMC: sh-sdhi: 0, sh-sdhi: 1, sh-sdhi: 2
  12. SF: Detected S25FL512S with page size 256 KiB, total 64 MiB
  13. In: serial
  14. Out: serial
  15. Err: serial
  16. Net: sh_eth
  17. Hit any key to stop autoboot: 0
  18. 3609730 bytes read in 649 ms (5.3 MiB/s)
  19. ## Booting kernel from Legacy Image at 40007fc0 ...
  20. Image Name: 'Linux-3.10.31-ltsi'
  21. Image Type: ARM Linux Kernel Image (uncompressed)
  22. Data Size: 3609666 Bytes = 3.4 MiB
  23. Load Address: 40008000
  24. Entry Point: 40008000
  25. Verifying Checksum ... OK
  26. XIP Kernel Image ... OK
  27. OK
  28.  
  29. Starting kernel ...
  30.  
  31. Booting Linux on physical CPU 0x0
  32. Initializing cgroup subsys cpuset
  33. Initializing cgroup subsys cpu
  34. Initializing cgroup subsys cpuacct
  35. Linux version 3.10.31-ltsi (xen@ubuntuxen-OptiPlex-7010) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Tue Jan 12 18:00:34 IST 2016
  36. CPU: ARMv7 Processor [413fc0f2] revision 2 (ARMv7), cr=30c73c7d
  37. CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  38. Machine: porter, model: Porter
  39. debug: ignoring loglevel setting.
  40. cma: CMA: reserved 256 MiB at 70000000
  41. cma: CMA: reserved 256 MiB at 57000000
  42. Memory policy: ECC disabled, Data cache writealloc
  43. On node 0 totalpages: 524288
  44. free_area_init_node: node 0, pgdat c070ccc0, node_mem_map c0a81000
  45. Normal zone: 1248 pages used for memmap
  46. Normal zone: 0 pages reserved
  47. Normal zone: 159744 pages, LIFO batch:31
  48. HighMem zone: 15136 pages used for memmap
  49. HighMem zone: 364544 pages, LIFO batch:31
  50. PERCPU: Embedded 7 pages/cpu @c4a9e000 s7872 r8192 d12608 u32768
  51. pcpu-alloc: s7872 r8192 d12608 u32768 alloc=8*4096
  52. pcpu-alloc: [0] 0 [0] 1
  53. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 523040
  54. Kernel command line: console=ttySC6,38400 ignore_loglevel vmalloc=384M video=HDMI-A-1:1920x1080-32@60 root=/dev/mmcblk1p1 rootdelay=3 rw rootfstype=ext3
  55. PID hash table entries: 4096 (order: 2, 16384 bytes)
  56. Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  57. Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  58. Memory: 1024MB 1024MB = 2048MB total
  59. Memory: 1547512k/1547512k available, 549640k reserved, 1196032K highmem
  60. Virtual kernel memory layout:
  61. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  62. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  63. vmalloc : 0xe7800000 - 0xff000000 ( 376 MB)
  64. lowmem : 0xc0000000 - 0xe7000000 ( 624 MB)
  65. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  66. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  67. .text : 0xc0008000 - 0xc069608c (6713 kB)
  68. .init : 0xc0697000 - 0xc06ceec0 ( 224 kB)
  69. .data : 0xc06d0000 - 0xc070e5a0 ( 250 kB)
  70. .bss : 0xc070e5a0 - 0xc0744724 ( 217 kB)
  71. Preemptible hierarchical RCU implementation.
  72. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
  73. NR_IRQS:16 nr_irqs:16 16
  74. Architected local timer running at 10.00MHz (virt).
  75. Switching to timer-based delay loop
  76. sched_clock: ARM arch timer >56 bits at 10000kHz, resolution 100ns
  77. sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
  78. Console: colour dummy device 80x30
  79. Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=100000)
  80. pid_max: default: 32768 minimum: 301
  81. Mount-cache hash table entries: 512
  82. Initializing cgroup subsys devices
  83. Initializing cgroup subsys freezer
  84. CPU: Testing write buffer coherency: ok
  85. CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  86. Setting up static identity map for 0xc04eca60 - 0xc04ecab8
  87. CPU1: Booted secondary processor
  88. CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  89. Brought up 2 CPUs
  90. SMP: Total of 2 processors activated (40.00 BogoMIPS).
  91. CPU: All CPU(s) started in SVC mode.
  92. devtmpfs: initialized
  93. pinctrl core: initialized pinctrl subsystem
  94. regulator-dummy: no parameters
  95. NET: Registered protocol family 16
  96. DMA: preallocated 256 KiB pool for atomic coherent allocations
  97. renesas_irqc e61c0000.interrupt-controller: driving 10 irqs
  98. sh-pfc e6060000.pfc: r8a77910_pfc support registered
  99. No ATAGs?
  100. hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  101. hw-breakpoint: maximum watchpoint size is 8 bytes.
  102. bio: create slab <bio-0> at 0
  103. gpio_rcar e6050000.gpio: driving 32 GPIOs
  104. gpio_rcar e6051000.gpio: driving 32 GPIOs
  105. gpio_rcar e6052000.gpio: driving 32 GPIOs
  106. gpio_rcar e6053000.gpio: driving 32 GPIOs
  107. gpio_rcar e6054000.gpio: driving 32 GPIOs
  108. gpio_rcar e6055000.gpio: driving 32 GPIOs
  109. gpio_rcar e6055400.gpio: driving 32 GPIOs
  110. gpio_rcar e6055800.gpio: driving 26 GPIOs
  111. SDHI0 Vcc: 3300 mV
  112. SDHI2 Vcc: 3300 mV
  113. SDHI0 VccQ: 1800 <--> 3300 mV at 3300 mV
  114. SDHI2 VccQ: 1800 <--> 3300 mV at 3300 mV
  115. SCSI subsystem initialized
  116. libata version 3.00 loaded.
  117. usbcore: registered new interface driver usbfs
  118. usbcore: registered new interface driver hub
  119. usbcore: registered new device driver usb
  120. i2c-sh_mobile e60b0000.i2c: I2C adapter 6 with bus speed 100000 Hz (L/H=32/2b)
  121. i2c-rcar e6518000.i2c: probed
  122. i2c-rcar e6530000.i2c: probed
  123. i2c-rcar e6520000.i2c: probed
  124. i2c-rcar e6528000.i2c: probed
  125. media: Linux media interface: v0.10
  126. Linux video capture interface: v2.00
  127. sh_cmt sh_cmt.0: used for clock events
  128. Advanced Linux Sound Architecture Driver Initialized.
  129. Switching to clocksource arch_sys_counter
  130. NET: Registered protocol family 2
  131. TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  132. TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  133. TCP: Hash tables configured (established 8192 bind 8192)
  134. TCP: reno registered
  135. UDP hash table entries: 512 (order: 2, 16384 bytes)
  136. UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  137. NET: Registered protocol family 1
  138. RPC: Registered named UNIX socket transport module.
  139. RPC: Registered udp transport module.
  140. RPC: Registered tcp transport module.
  141. RPC: Registered tcp NFSv4.1 backchannel transport module.
  142. PCI: CLS 0 bytes, default 64
  143. bounce pool size: 64 pages
  144. VFS: Disk quotas dquot_6.5.2
  145. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  146. NFS: Registering the id_resolver key type
  147. Key type id_resolver registered
  148. Key type id_legacy registered
  149. jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
  150. msgmni has been set to 1198
  151. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  152. io scheduler noop registered
  153. io scheduler deadline registered
  154. io scheduler cfq registered (default)
  155. unable to find transceiver
  156. platform pci-rcar-gen2.0: Driver pci-rcar-gen2 requests probe deferral
  157. unable to find transceiver
  158. platform pci-rcar-gen2.1: Driver pci-rcar-gen2 requests probe deferral
  159. rcar-pcie fe000000.pcie: PCIe link down
  160. DA9210: 1000 mV at 4600 mA
  161. Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  162. SuperH (H)SCI(F) driver initialized
  163. sh-sci.6: ttySC6 at MMIO 0xe6e60000 (irq = 184) is a scif
  164. console [ttySC6] enabled
  165. loop: module loaded
  166. at24 2-0050: 256 byte 24c02 EEPROM, writable, 16 bytes/write
  167. scsi0 : sata_rcar
  168. ata1: SATA max UDMA/133 irq 137
  169. m25p80 spi0.0: s25fl512s (65536 Kbytes)
  170. 3 ofpart partitions found on MTD device spi0.0
  171. Creating 3 MTD partitions on "spi0.0":
  172. 0x000000000000-0x000000040000 : "loader"
  173. 0x000000040000-0x000000440000 : "user"
  174. 0x000000440000-0x000004000000 : "flash"
  175. renesas_spi e6b10000.spi: probed
  176. tun: Universal TUN/TAP device driver, 1.6
  177. tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  178. vcan: Virtual CAN interface driver
  179. CAN device driver interface
  180. rcar_can e6e80000.can: device registered (reg_base=e78f2000, irq=218)
  181. libphy: sh_mii: probed
  182. sh-eth ee700000.ethernet eth0: Base address at 0xee700000, 2e:09:0a:00:6d:65, IRQ 194.
  183. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  184. ehci-pci: EHCI PCI platform driver
  185. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  186. usbcore: registered new interface driver usb-storage
  187. mousedev: PS/2 mouse device common for all mice
  188. i2c /dev entries driver
  189. i2c-core: driver [adv7612] using legacy suspend method
  190. i2c-core: driver [adv7612] using legacy resume method
  191. i2c-core: driver [adv7180] using legacy suspend method
  192. i2c-core: driver [adv7180] using legacy resume method
  193. soc-camera-pdrv soc-camera-pdrv.0: Probing soc-camera-pdrv.0
  194. adv7180 2-0020: chip found @ 0x40 (e6530000.i2c)
  195. [drm] Initialized drm 1.1.0 20060810
  196. rcar-du rcar-du-r8a7791: fb0: frame buffer device
  197. rcar-du rcar-du-r8a7791: registered panic notifier
  198. rcar-du rcar-du-r8a7791: CRTC[1] used by FBDev
  199. [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  200. ata1: link resume succeeded after 1 retries
  201. [drm] No driver support for vblank timestamp query.
  202. [drm] Initialized rcar-du 1.0.0 20130110 on minor 0
  203. device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: [email protected]
  204. sh_mobile_sdhi sdhi0: Got CD GPIO #806.
  205. sh_mobile_sdhi sdhi0: Got WP GPIO #807.
  206. ata1: SATA link down (SStatus 0 SControl 300)
  207. sh_mobile_sdhi sdhi0: mmc0 base at 0xee100000 clock rate 195 MHz
  208. sh_mobile_sdhi sdhi2: Got CD GPIO #822.
  209. sh_mobile_sdhi sdhi2: mmc1 base at 0xee160000 clock rate 97 MHz
  210. usbcore: registered new interface driver usbhid
  211. usbhid: USB HID core driver
  212. platform sound.6: Driver asoc-simple-card requests probe deferral
  213. rcar_sound ec500000.rcar_sound: probed
  214. TCP: cubic registered
  215. NET: Registered protocol family 10
  216. sit: IPv6 over IPv4 tunneling driver
  217. NET: Registered protocol family 17
  218. can: controller area network core (rev 20120528 abi 9)
  219. NET: Registered protocol family 29
  220. can: raw protocol (rev 20120528)
  221. can: broadcast manager protocol (rev 20120528 t)
  222. can: netlink gateway (rev 20130117) max_hops=1
  223. Key type dns_resolver registered
  224. VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
  225. pci-rcar-gen2 pci-rcar-gen2.0: PCI: bus0 revision 11
  226. pci-rcar-gen2 pci-rcar-gen2.0: PCI host bridge to bus 0003:00
  227. pci_bus 0003:00: root bus resource [io 0xee080000-0xee08ffff]
  228. pci_bus 0003:00: root bus resource [mem 0xee080000-0xee08ffff]
  229. pci_bus 0003:00: No busn resource found for root bus, will use [bus 00-ff]
  230. pci 0003:00:00.0: [1033:0000] type 00 class 0x060000
  231. pci 0003:00:00.0: reg 10: [mem 0xee090800-0xee090bff]
  232. pci 0003:00:00.0: reg 14: [mem 0x40000000-0x7fffffff pref]
  233. pci 0003:00:01.0: [1033:0035] type 00 class 0x0c0310
  234. pci 0003:00:01.0: reg 10: [mem 0x00000000-0x00000fff]
  235. pci 0003:00:01.0: supports D1 D2
  236. pci 0003:00:01.0: PME# supported from D0 D1 D2 D3hot
  237. pci 0003:00:02.0: [1033:00e0] type 00 class 0x0c0320
  238. pci 0003:00:02.0: reg 10: [mem 0x00000000-0x000000ff]
  239. pci 0003:00:02.0: supports D1 D2
  240. pci 0003:00:02.0: PME# supported from D0 D1 D2 D3hot
  241. PCI: bus0: Fast back to back transfers disabled
  242. pci_bus 0003:00: busn_res: [bus 00-ff] end is updated to 00
  243. PCI: Device 0003:00:01.0 not available because of resource collisions
  244. pci 0003:00:01.0: Can't enable PCI device, BIOS handoff failed.
  245. PCI: Device 0003:00:01.0 not available because of resource collisions
  246. pci 0003:00:01.0: Driver ohci_hcd requests probe deferral
  247. PCI: Device 0003:00:02.0 not available because of resource collisions
  248. pci 0003:00:02.0: Can't enable PCI device, BIOS handoff failed.
  249. PCI: Device 0003:00:02.0 not available because of resource collisions
  250. pci 0003:00:02.0: Driver ehci-pci requests probe deferral
  251. pci 0003:00:01.0: BAR 0: assigned [mem 0xee080000-0xee080fff]
  252. pci 0003:00:02.0: BAR 0: assigned [mem 0xee081000-0xee0810ff]
  253. pci-rcar-gen2 pci-rcar-gen2.1: PCI: bus0 revision 11
  254. pci-rcar-gen2 pci-rcar-gen2.1: PCI host bridge to bus 0004:01
  255. pci_bus 0004:01: root bus resource [io 0xee0c0000-0xee0cffff]
  256. pci_bus 0004:01: root bus resource [mem 0xee0c0000-0xee0cffff]
  257. pci_bus 0004:01: No busn resource found for root bus, will use [bus 01-ff]
  258. pci 0004:01:00.0: [1033:0000] type 00 class 0x060000
  259. pci 0004:01:00.0: reg 10: [mem 0xee0d0800-0xee0d0bff]
  260. pci 0004:01:00.0: reg 14: [mem 0x40000000-0x7fffffff pref]
  261. pci 0004:01:01.0: [1033:0035] type 00 class 0x0c0310
  262. pci 0004:01:01.0: reg 10: [mem 0x00000000-0x00000fff]
  263. pci 0004:01:01.0: supports D1 D2
  264. pci 0004:01:01.0: PME# supported from D0 D1 D2 D3hot
  265. pci 0004:01:02.0: [1033:00e0] type 00 class 0x0c0320
  266. pci 0004:01:02.0: reg 10: [mem 0x00000000-0x000000ff]
  267. pci 0004:01:02.0: supports D1 D2
  268. pci 0004:01:02.0: PME# supported from D0 D1 D2 D3hot
  269. PCI: bus1: Fast back to back transfers disabled
  270. pci_bus 0004:01: busn_res: [bus 01-ff] end is updated to 01
  271. PCI: Device 0004:01:01.0 not available because of resource collisions
  272. pci 0004:01:01.0: Can't enable PCI device, BIOS handoff failed.
  273. PCI: Device 0004:01:01.0 not available because of resource collisions
  274. pci 0004:01:01.0: Driver ohci_hcd requests probe deferral
  275. PCI: Device 0004:01:02.0 not available because of resource collisions
  276. pci 0004:01:02.0: Can't enable PCI device, BIOS handoff failed.
  277. PCI: Device 0004:01:02.0 not available because of resource collisions
  278. pci 0004:01:02.0: Driver ehci-pci requests probe deferral
  279. pci 0004:01:01.0: BAR 0: assigned [mem 0xee0c0000-0xee0c0fff]
  280. pci 0004:01:02.0: BAR 0: assigned [mem 0xee0c1000-0xee0c10ff]
  281. asoc-simple-card sound.6: ak4642-hifi <-> ec500000.rcar_sound mapping ok
  282. PCI: enabling device 0003:00:01.0 (0140 -> 0142)
  283. ohci_hcd 0003:00:01.0: OHCI Host Controller
  284. ohci_hcd 0003:00:01.0: new USB bus registered, assigned bus number 1
  285. ohci_hcd 0003:00:01.0: irq 140, io mem 0xee080000
  286. hub 1-0:1.0: USB hub found
  287. hub 1-0:1.0: 1 port detected
  288. PCI: enabling device 0003:00:02.0 (0140 -> 0142)
  289. ehci-pci 0003:00:02.0: EHCI Host Controller
  290. ehci-pci 0003:00:02.0: new USB bus registered, assigned bus number 2
  291. ehci-pci 0003:00:02.0: irq 140, io mem 0xee081000
  292. ehci-pci 0003:00:02.0: USB 2.0 started, EHCI 1.00
  293. hub 2-0:1.0: USB hub found
  294. hub 2-0:1.0: 1 port detected
  295. PCI: enabling device 0004:01:01.0 (0140 -> 0142)
  296. ohci_hcd 0004:01:01.0: OHCI Host Controller
  297. ohci_hcd 0004:01:01.0: new USB bus registered, assigned bus number 3
  298. ohci_hcd 0004:01:01.0: irq 145, io mem 0xee0c0000
  299. hub 3-0:1.0: USB hub found
  300. hub 3-0:1.0: 1 port detected
  301. PCI: enabling device 0004:01:02.0 (0140 -> 0142)
  302. ehci-pci 0004:01:02.0: EHCI Host Controller
  303. ehci-pci 0004:01:02.0: new USB bus registered, assigned bus number 4
  304. ehci-pci 0004:01:02.0: irq 145, io mem 0xee0c1000
  305. ehci-pci 0004:01:02.0: USB 2.0 started, EHCI 1.00
  306. hub 4-0:1.0: USB hub found
  307. hub 4-0:1.0: 1 port detected
  308. drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  309. ALSA device list:
  310. #0: rsnd-dai.0-ak4642-hifi
  311. Waiting 3sec before mounting root device...
  312. VFS: Cannot open root device "mmcblk1p1" or unknown-block(0,0): error -6
  313. Please append a correct "root=" boot option; here are the available partitions:
  314. 1f00 256 mtdblock0 (driver?)
  315. 1f01 4096 mtdblock1 (driver?)
  316. 1f02 61184 mtdblock2 (driver?)
  317. Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
  318. CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.31-ltsi #1
  319. Backtrace:
  320. [<c001258c>] (dump_backtrace+0x0/0x104) from [<c0012798>] (show_stack+0x18/0x1c)
  321. r6:d60bf000 r5:c070edb0 r4:d60bf000 r3:00204140
  322. [<c0012780>] (show_stack+0x0/0x1c) from [<c04e71f8>] (dump_stack+0x20/0x28)
  323. [<c04e71d8>] (dump_stack+0x0/0x28) from [<c04e4c24>] (panic+0x90/0x1e0)
  324. [<c04e4b94>] (panic+0x0/0x1e0) from [<c06980c8>] (mount_block_root+0x1ec/0x22c)
  325. r3:60000113 r2:00000001 r1:d685fec0 r0:c0607219
  326. r7:c06c0684
  327. [<c0697edc>] (mount_block_root+0x0/0x22c) from [<c06981f0>] (mount_root+0xe8/0x10c)
  328. [<c0698108>] (mount_root+0x0/0x10c) from [<c0698338>] (prepare_namespace+0x124/0x184)
  329. r7:c06cc838 r6:c06c0660 r5:c06c0684 r4:c070e620
  330. [<c0698214>] (prepare_namespace+0x0/0x184) from [<c0697c90>] (kernel_init_freeable+0x1e8/0x238)
  331. r5:000000b3 r4:00000008
  332. [<c0697aa8>] (kernel_init_freeable+0x0/0x238) from [<c04db80c>] (kernel_init+0x10/0xec)
  333. r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c04db7fc
  334. r4:00000000
  335. [<c04db7fc>] (kernel_init+0x0/0xec) from [<c000ead8>] (ret_from_fork+0x14/0x3c)
  336. r4:00000000 r3:d685e000
  337. CPU1: stopping
  338. CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.10.31-ltsi #1
  339. Backtrace:
  340. [<c001258c>] (dump_backtrace+0x0/0x104) from [<c0012798>] (show_stack+0x18/0x1c)
  341. r6:00000001 r5:00000005 r4:c06cdf14 r3:00200040
  342. [<c0012780>] (show_stack+0x0/0x1c) from [<c04e71f8>] (dump_stack+0x20/0x28)
  343. [<c04e71d8>] (dump_stack+0x0/0x28) from [<c00147f8>] (handle_IPI+0xc4/0x11c)
  344. [<c0014734>] (handle_IPI+0x0/0x11c) from [<c0009310>] (gic_handle_irq+0x60/0x68)
  345. r7:d6883fac r6:d6883f78 r5:c06d890c r4:e7802000
  346. [<c00092b0>] (gic_handle_irq+0x0/0x68) from [<c000e600>] (__irq_svc+0x40/0x70)
  347. Exception stack(0xd6883f78 to 0xd6883fc0)
  348. 3f60: 00000001 00000000
  349. 3f80: 00000716 00000000 d6882010 d6882000 30c23c7d c070ea18 40007000 413fc0f2
  350. 3fa0: 00000000 d6883fcc d6883fd0 d6883fc0 c000fcd8 c000fcdc 60000113 ffffffff
  351. r6:ffffffff r5:60000113 r4:c000fcdc r3:c000fcd8
  352. [<c000fcb0>] (arch_cpu_idle+0x0/0x34) from [<c005c574>] (cpu_startup_entry+0xd0/0x130)
  353. [<c005c4a4>] (cpu_startup_entry+0x0/0x130) from [<c04dde44>] (secondary_start_kernel+0x11c/0x138)
  354. [<c04ddd28>] (secondary_start_kernel+0x0/0x138) from [<404dd424>] (0x404dd424)
  355. r5:00000000 r4:56851fc0
  356. drm_kms_helper: panic occurred, switching back to text console
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!